HS Endpoint Processor with USB 2.0, Smart Card, & FMC for Secure Token & Storage

Transcription

1 SEC2410/SEC4410 HS Endpoint Processor with USB 2.0, Smart Card, & FMC for Secure Token & Storage PRODUCT FEATURES Data Brief General Description The SMSC SEC2410/SEC4410 are USB 2.0 compliant, hi-speed bulk-only mass storage class peripheral controllers. They are intended to be used to read and write to popular flash media, including Secure Digital (SD), and MultiMediaCard TM (MMC) families. The SMSC SEC2410/SEC4410 are fully integrated, single-chip solutions capable of ultra-high performance operation. Average sustained transfer rates exceeding 35 MB/s are possible if the media and host can support those rates. The SMSC SEC2410/SEC4410 includes provisions to read/write to secure media formats, as well as support AES encryption, without performance impact. SMSC s TrustSpan TM Technology enables digital systems to securely communicate, process, move and store information on system boards, across networks and through the cloud. General Features The SEC2410/SEC4410 is available in two lead-free RoHS compliant packages: 64-pin QFN (9x9 mm) package 72-pin QFN (10x10 mm) package that includes debug pins to interface to standard ARM debug tools Hardware-controlled data flow architecture for all selfmapped media Pipelined hardware support for access to non-selfmapped media Order number (see next page) with i denote the products that support the industrial temperature range of -40ºC to 85ºC Support included for secure media format on a licensed, customized basis SD Secure Hardware Features Single-chip flash media controller containing: A multiplexed interface for use with combo card sockets SD/MMC flash media reader/writer SDIO and MMC streaming mode support Extended configuration options Media Activity LED GPIO configuration and polarity Up to 32 GPIOs for special function use One GPIO with up to 200 ma drive On board 24 MHz crystal driver circuit Optional external 24 MHz clock input Internal card power FET 200 ma "Fold-back" short circuit protection ARM M3 32-bit microprocessor 60 MHz execution speed at 1 cycle per instruction (minimum) 32 KBytes of internal SRAM for a general purpose scratchpad 96 KByte SRAM available for code execution 32 KByte internal code ROM JTAG interface Supports a single external supply source; internal regulators provide 1.2 V internal core voltage for additional bill of materials and power savings Optimized pinout improves signal routing, easing implementation for improved signal integrity 1.2 V reference voltage for HSIC (SEC4410 only) Flash Media Specification Compliance Secure Digital 2.0 HS-SD, SDHC, SDXC TransFlash TM and reduced form factor media MultiMediaCard MMC version 4.2: 1/4/8-bit emmc version 4.4 Software Features Customizable vendor-specific data Reduced memory footprint SMSC SEC2410/SEC4410 Revision 1.0 ( )

2 Applications Secure dongles and storage Flash media card reader/writers Desktop and mobile PCs Consumer A/V and media players/viewers Compatible with Microsoft Vista TM and Vista ReadyBoost TM Windows 7, XP, ME, 2K SP4 Apple Mac OSx Linux Mass Storage Class Drivers Order Numbers: ORDER NUMBERS LEAD-FREE ROHS COMPLIANT PACKAGE PACKAGE SIZE (mm) TEMPERATURE RANGE SEC2410/SEC2410i-JZX 0ºC to 85ºC 64QFN 9x9 SEC4410/SEC4410i-JZX -40ºC to 85ºC SEC2410/SEC2410i-AKZE 72QFN 10x10 0ºC to 85ºC SEC4410/SEC4410i-AKZE -40ºC to 85ºC This product meets the halogen maximum concentration values per IEC For RoHS compliance and environmental information, please visit 80 ARKAY DRIVE, HAUPPAUGE, NY (631) or 1 (800) 443-SEMI Copyright 2011 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC s website at SMSC is a registered trademark of Standard Microsystems Corporation ( SMSC ). Product names and company names are the trademarks of their respective holders. SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Revision 1.0 ( ) 2 SMSC SEC2410/SEC4410

3 Overview The SMSC SEC2410/SEC4410 are flash media card reader solutions fully compliant with the USB 2.0 Specification. All required resistors on the USB ports are integrated into the device. This includes all series termination resistors on D+ and D- pins and all required pull-down and pull-up resistors. The over-current sense inputs for the downstream facing ports have internal pull-up resistors. Hardware Features Complete USB Specification 2.0 compatibility Single chip flash media controller in 64-pin and 72-pin QFN, lead-free RoHS compliant packages SEC2410/SEC4410 support commercial temperatures from 0 C to +70 C SEC2410i/SEC4410i support industrial temperatures from -40 C to +85 C Up to 32 GPIOs Configuration and polarity for special function use such as LED indicators, button inputs, and power control to memory devices The number of actual GPIOs depends on the implemented configuration One GPIO available with up to 200 ma drive and fold-back short circuit protection ARM M3 32-bit microprocessor 60 MHz - single cycle execution 32 KB internal SRAM 96 KB code SRAM 32 KB internal Supports a single external supply source; internal regulators provide 1.2 V internal core voltage for additional bill of materials and power savings Compliance with the following flash media card specifications: Secure Digital 2.0 HS-SD, SDHC, SDXC TransFlash and reduced form factor media MultiMediaCard MMC version 4.2: 1/4/8 bit MMC emmc version 4.4 Software Features Supports USB Mass Storage Compliant Bootable BIOS Supports firmware upgrade via USB bus for Flash and SD/MMC cards ( boot block flash not required). Compatible with Microsoft Vista; Windows 7, XP, and 2K SP3&4; Apple OS10; and Linux Multi-LUN Mass Storage Class Drivers SMSC SEC2410/SEC Revision 1.0 ( )

4 Block Diagrams SEC 2410 AUTO_CBW PROC SD1 USB Host PHY SIE FMDU FMI SD2 Multiplexed 1.2 V Reg EP0 TX EP0 RX VDD12 24 MHz Crystal PLL AES Block RAM EP1 RX EP1 TX EP2 RX EP2 TX 10K total VDD12PLLMON AHB Bridge 1.2 V Reg PWR_FET1 GPIOs GPIO10/ VAR_CRD_PWR Program Memory I/O Bus Trace FIFO Clock Generation and Control Data RAM 32 KB ARM Processor Code RAM 96 KB ROM 64 KB Figure 1 SEC2410 Block Diagram Revision 1.0 ( ) 4 SMSC SEC2410/SEC4410

5 SEC 4410 AUTO_CBW PROC HSIC HSIC SIE FMDU FMI SD1 SD2 Multiplexed 1.2 V Ref 1.2 V Reg EP0 TX EP0 RX VDD12 24 MHz Crystal PLL AES Block RAM EP1 RX EP1 TX EP2 RX EP2 TX 10K total VDD12PLLMON AHB Bridge 1.2 V Reg PWR_FET1 GPIOs GPIO10/ VAR_CRD_PWR Program Memory I/O Bus Trace FIFO Clock Generation and Control Data RAM 32 KB ARM Processor Code RAM 96 KB ROM 64 KB Figure 2 SEC4410 Block Diagram SMSC SEC2410/SEC Revision 1.0 ( )

6 Package Outlines Figure 3 SEC2410/SEC Pin QFN Package Outline Revision 1.0 ( ) 6 SMSC SEC2410/SEC4410

7 Figure 4 SEC2410/SEC Pin QFN Package Outline SMSC SEC2410/SEC Revision 1.0 ( )