Pull Handles. Door Furniture DF3:010
|
|
|
- Grant McDaniel
- 7 years ago
- Views:
Transcription
1 Pull Handles A classic yet contemporary styled offset design offered either plain ended or with a choice of three finial designs, available rear bolt fix, in pairs for back-to-back installation, or adapted for face fixing. These Pulls can also be fitted to a variety of different Back Plates if desired (face fixed version 8065) 8061 (face fixed version 8066) Rear bolt fixing versions supplied with M8 x 50mm machine screws (longer screws available upon request). Back-to-back fixed pairs supplied with M8 beefeater fixing system to suit doors up to 64mm thick. Face fixed versions supplied with finished matched no.8 x 25mm wood screws (face fixed version 8044) face fixed version base plate design handles fixed to plates are available 8062 (face fixed version 8067) * 255* 239* 313* 239* 305* * other lengths are available upon request rear bolt fixed projection 78 face fixed projection DF3:010
2 Pull Handles A selection of traditional face fixed, solid cast, offset design Pull Handles. The design is available with a variety of installation options - including back-to-back fixed. Complementary Finger Plates can be found on page DF3: AA & 1433A supplied with finish matched no.6 x 19mm wood screws and M6 x 50mm machine screws (longer screws available upon request). 1433B & 1433C supplied as above, but with no.8 x 25mm wood screws. 1442, 1435AA & 1435A supplied with finish matched no.6 x 19mm wood screws. 1435B, 1435C, 1445 & 1446 supplied with no.8 x 25mm wood screws supplied with M6 x 50mm machine screws (longer screws available upon request) & Back-to-back fixed pairs supplied with M6 beefeater fixing system to suit doors up to 64mm thick (face fixed & rear bolt fixing) 1435 (face fixed only) 1434 (rear bolt fixing) 1446 Matching Finger Plate in solid bronze available - see DF3:150 Overall Length 1445 Centres Plate width Projection AA 162 (158*) 122 (116*) - 40 (41*) A B C 302 (305*) (53*) 1442 A B * Due to different manufacturing processes, the solid bronze version of the AA and C size slightly differ dimensionally from the brass based version UPDATED 06/15 DF3:020
3 Pull Handles A classic straight design Pull, offered in three lengths and available singly for rear bolt fixing, in pairs for back-to-back operation, or with concealed face fixed rosettes. These Pulls can also be fitted to a variety of different Back Plates if desired supplied with M8 x 50mm machine screws (longer screws available upon request). Back-to-back fixed pairs supplied with M8 beefeater fixing system to suit doors up to 64mm thick supplied with no.6 x 25mm wood screws (rear bolt fixing) handles fixed to 4330 (concealed face fixing) plates are available C P D P C (centres) D (rosette diameter) P (projection) 4325 A B C D ONLY 4330 A B C D ONLY DF3:030
4 Pull Handles & Finger Plates A traditional offset design Pull, with or without Back Plate, and matching Finger Plate, offered in two sizes. Pulls in pairs for back-to-back installation are available. The Back Plate & Finger Plate, manufactured from 3mm thick material, are also available in custom sizes. The Pulls can be fitted to a variety of different Back Plates if desired & 7001 supplied with M6 x 50mm machine screws (longer screws available upon request) also supplied with finish matched no.8 x 25mm wood screws. Back-to-back fixed pairs supplied with M6 beefeater fixing system to suit doors up to 64mm thick supplied with finish matched no.6 x 19mm wood screws (rear bolt fixing) Overall length Centres Plate width Projection 6999 A B C ONLY 7001 A B A B custom sized Plates available upon request DF3:040
5 Pull Handles & Finger Plates A traditional offset design Pull, with or without Back Plate, and a matching Finger Plate, both offered in two sizes. The Pulls are also offered in pairs for backto-back installation. These Pulls can be fitted to a variety of different Back Plates if desired & 7000 supplied with M6 x 50mm machine screws (longer screws available upon request) also supplied with finish matched no.8 x 25mm wood screws. Back-to-back fixed pairs supplied with M6 beefeater fixing system to suit doors up to 64mm thick supplied with finish matched no.6 x 19mm wood screws (rear bolt fixing) Overall length Centres Plate width Projection 6998 A B C ONLY 6999 A B C ONLY 7000 A B C ONLY DF3:050
6 Pull Handles & Finger Plates A traditional offset design Pull, with or without Back Plate, and matching Finger Plate, offered in two sizes. Pulls in pairs for back-to-back installation are available. The Back Plate & Finger Plate, manufactured from 3mm thick material, are also available in custom lengths. The Pulls can be fitted to a variety of different Back Plates if desired & 1979 supplied with M6 x 50mm machine screws (longer screws available upon request) also supplied with finish matched no.8 x 25mm wood screws. Back-to-back fixed pairs supplied with M6 beefeater fixing system to suit doors up to 64mm thick supplied with finish matched no.6 x 19mm wood screws (rear bolt fixing) Overall length Centres Plate width Projection 1976 A B A B A B DF3:060
7 Pull Handles & Finger Plates A traditional offset design Pull, with or without Back Plate, and a matching Finger Plate, both offered in two sizes. The Pulls are also offered in pairs for backto-back installation. The Pulls can be fitted to a variety of different Back Plates if desired & 1977 supplied with M6 x 50mm machine screws (longer screws available upon request) also supplied with finish matched no.8 x 25mm wood screws. Back-to-back fixed pairs supplied with M6 beefeater fixing system to suit doors up to 64mm thick supplied with finish matched no.6 x 19mm wood screws (rear bolt fixing) Overall length Centres Plate width Projection 1975 A B A B A B DF3:070
8 Pull Handles & Finger Plates An Art Deco period offset design Pull, with or without Back Plate, and a matching Finger Plate. This design of Pull is not available with a back-to-back installation option. The Pulls can be fitted to a variety of different Back Plates if desired & 9533 supplied with M6 x 50mm machine screws (longer screws available upon request) also supplied with finish matched no.8 x 25mm wood screws supplied with finish matched no.6 x 19mm wood screws. RH shown RH shown (rear bolt fixing) Overall length Centres Plate width Projection A B DF3:080
9 Pull Handles An Art Deco period offset Pull, with or without Back Plate, or with face fixed Pad Plates, along with a matching Finger Plate - all offered in two sizes. The Pulls are also offered in pairs for back-to-back installation, and can be fitted to a variety of different Back Plates if desired. 9512, 9515 & 9516 supplied with M6 x 50mm machine screws (longer screws available upon request) supplied with finish matched no.6 x 19mm wood screws and M6 x 50mm machine screws (longer screws available upon request) supplied with finish matched no.6 x 19mm wood screws also supplied with finish matched no.8 x 25mm wood screws. Back-to-back fixed pairs supplied with M6 beefeater fixing system to suit doors up to 64mm thick (rear bolt fixing) 9513 (face fixed & rear bolt fixed) 9514 (face fixed only) 9515 (rear bolt fixed only - no screw holes) Overall length Centres Plate size Projection offset design 9512 A B A x B x A x B x DF3:090
10 Pull Handles A traditional offset design Pull, available in two lengths and with eight Rosette designs, each in four diameters, which complement the Allart Select Door Knob & Lever Rosettes (see section ST3) Supplied with M6 x 50mm machine screws (longer screws available upon request). Back-to-back fixed pairs supplied with M6 beefeater fixing system to suit doors up to 64mm thick size A shown with 44mm Ø rosettes C C (centres) Projection D (diameter) A Ø 38, 44, 54, 64 B Ø 38, 44, 54, 64 D DF3:100
11 Pull Handles A traditional straight design Pull, available in two lengths and with eight Rosette designs, each in four diameters, which complement the Allart Select Door Knob & Lever Rosettes (see section ST3) Supplied with M6 x 50mm machine screws (longer screws available upon request). Back-to-back fixed pairs supplied with M6 beefeater fixing system to suit doors up to 64mm thick size A shown with 54mm Ø rosettes C C (centres) Projection D (diameter) A Ø 38, 44, 54, 64 B Ø 38, 44, 54, 64 D DF3:110
12 Pull Handles A classic straight design Pull, available in three lengths and with twelve Rosette designs, each in up to three diameters, which complement the Allart Select Door Knob & Lever Rosettes (see section ST3) Supplied with M8 x 50mm machine screws (longer screws available upon request). Back-to-back fixed pairs supplied with M8 beefeater fixing system to suit doors up to 64mm thick size B shown with 54mm Ø rosettes C C (centres) Projection D (diameter) A Ø 38 B Ø 44, 54, 64 D C Ø 44, 54, 64 DF3:120
13 Pull Handles & Finger Plates A traditional period straight design Pull, with or without Back Plate, and a matching Finger Plate. The Pulls are also offered in pairs for back-to-back installation. The Pulls can be fitted to a variety of different Back Plates if desired & 3938 supplied with M6 x 50mm machine screws (longer screws available upon request) also supplied with finish matched no.8 x 25mm wood screws. Back-to-back fixed pairs supplied with M6 beefeater fixing system to suit doors up to 64mm thick supplied with finish matched no.6 x 19mm wood screws (rear bolt fixing) Overall length Centres Plate width Projection DF3:130
14 Finger Plates A selection of Finger Plates / Pull Handle Back Plates in eleven standard sizes. Custom sizes are available upon request. Pull Handle Back Plates are machined to mount the chosen Pull Handle centrally on the Plate. PLATE DESIGNS (54mm width shown) Supplied with finish matched no.6 x 19mm wood screws (square edge design) 6880 (round edge design) A size shown AA A B C D E F G H J K Length Width Thickness all plates are 6mm thick Custom sizes available upon request - surcharge may apply. DF3:140
15 Finger Plates - Concealed Fix A selection of concealed adhesive fix Finger Plates in eleven standard sizes. Custom sizes are available upon request. PLATE DESIGNS (54mm width shown) Supplied with four locating fixing pins to the rear for adhesive fixing. Ø (square edge design) 6830 (round edge design) Rear view AA size shown AA A B C D E F G H J K Length Width Thickness all plates are 6mm thick Custom sizes available upon request - surcharge may apply. 06/15 DF3:145
16 06/15 DF3:146
17 Finger Plates & Kick Plates Finger Plates (except 1441) and Kick Plates manufactured from sheet metal of three different thicknesses, made to order in custom sizes and with the option of either square or rounded corners. The 1441 is a solid cast bronze Finger Plate to match the 1446 Pull Handle (see page DF3:020). ONLY Supplied with finished matched no.6 x 19mm wood screws. Kick Plates and large Finger Plates will be supplied with either 6 or 8 screws as appropriate radiused corners (shown) 1729 square corners x 63 x radiused corners 2295 square corners (shown) DF3:150
Architectural Nylon. Architectural. Nylon
Architectural Nylon Architectural Nylon Contents Paris Series 273-279 Pull Handles and Accessories 281-292 269 Architectural Nylon HOPPE nylon levers and pull handles are manufactured to exacting standards
Rose Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au
Rose Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Robert Watson Series 20 Symphony Series 1420 Symphony Series 1360 Series Door
COASTAL SERIES. 316 Solid Stainless Steel Door Furniture
COASTAL SERIES 316 Solid Stainless Steel Door Furniture DORMA COASTAL SERIES SOLID STAINLESS STEEL ROSE AND PLATE DOOR FURNITURE DORMA in Australia and New Zealand is developing into a leading manufacturer
ScanFlex lever handles
lever handles ASSA ABLOY, the global leader in door opening solutions INDHOLDSFORTEGNELSE INDEX ScanFlex lever handles ScanFlex dørbeslag Dørgreb Lever handles....................................................................................
2.9 WINDOW & DOOR BUCKS
2.9 WINDOW & DOOR BUCKS Bucks provide attachment surfaces for windows and doors while holding back concrete from these openings during concrete placement. Mark the center and edges of openings as you place
Skirt 1 / 4. The Skirt. The skirt patterns were downloaded from Mark's site but they need expanding before they can be used.
Skirt 1 / 4 The Patterns The Skirt The skirt patterns were downloaded from Mark's site but they need expanding before they can be used. I used Corel Draw's real world dimensions to expand the patterns
Lever on Round Rose. Fire Safety: Included on a successful fi re test to BS EN1634 Part1: 2002. Assessed for use on 30 min, & 1 hour fi re doors.
Verona Series Verona Series HOPPE Verona Series 1510/42K Lever on Round Rose 9 38 24.5 Supplied with bolt through fi xings - AR200FP (701742) Supplied with HOPPE 100mm patented split profi le spindle (517572)
S U P P L E M E N TA RY
S U P P L E M E N TA RY PRODUCTS INTRODUCED SINCE THE LAUNCH OF OUR CURRENT CATA L O G U F R A N K A L L A R T Contact Details Frank Allart & Co. Limited, 15/35 Great Tindal Street, Ladywood, Birmingham,
An ASSA ABLOY Group brand. 4800LN Series. Interconnected Locks
An ASSA ABLOY Group brand 4800LN Series Interconnected Locks performance meets style introduction The Yale 4800LN series interconnected locksets combine our key-in-lever locksets with the added safety
Door Hardware Lock Specifications
Door Hardware Lock Specifications Directory Lock Type Page Exterior Mortise Lock Specifications... 2 2.5 Backset Mortise Locks Specification... 3 2.5 Backset Mortise Lock Functions (6301, 6310, 6315, 6318,
NEW. Teramo See Page 136
Basin NEW Teramo See Page 136 134 (INCLUDING COUNTERTOP BASINS) Looking for the perfect storage solution With the average bathroom getting smaller and more minimalistic in styling, bathroom furniture provides
Craft and Design Application of Injection Moulding (Mobile Phone)
Craft and Design Application of Injection Moulding (Mobile Phone) 5700 Summer 1999 HIGHER STILL Craft and Design Application of Injection Moulding (Mobile Phone) Support Materials This Support Material
Router Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
1 Door Tall Unit ASSEMBLY GUIDE. Page 1 of 9. WARNING: Contains small parts, keep out of reach of children.
Page 1 of 9 ASSEMBLY GUIDE 1 Door Tall Unit IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present If any parts are missing from Parts List 1, please
Installation Instructions and Ordering Information
The Flush Finish Trimless Door Frame Installation Instructions and Ordering Information CLEAN LINES! The Flush Finish Door Jamb System Manufactured by STUDCO Building Systems Step 1 Verify if you are using
HARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
Cedar Cottage Doghouse Plans
Overlapping cedar shingles add an element of charm to this medium size doghouse. The walls, floor, and trim are constructed of solid cedar, making it naturally weather resistant and provides excellent
CONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
Instruction Manual 19/9/01. Flat Roof Carport
Flat Roof Carport Thank you for choosing this quality carport. We strongly recommend that you read these instructions thoroughly. The carport you are building may vary from a carport previously bought
Cabinet Locks. Benefits:
Cabinet Locks Medeco high security cabinet locks are specifically designed for drawer or cabinet door applications where a conventional utility cam lock may not be suitable. Cabinet locks utilize heavy-duty
Copyright 2008 OLYMPUS CORPORATION All Rights Reserved. Paper Craft Assembly Manual
Paper Craft Assembly Manual Before assembly: 1/9 Tips on assembly: Print all the parts (Photo-quality paper is recommended for ink-jet printers and paper of medium thickness (0.20 mm) for laser printers.)
Step by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
DIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS
DIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS TheRTAStore.com STEP 1: CLEAR A WORK SPACE Place your RTA cabinet panels on a smooth, scratch resistant surface in a large, open area. (Some people like to
SHOP NOTES METAL SHAPER FOR YOUR SHOP
SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
Furniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
FLAT ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL
FLAT ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL Table of Contents Introduction... 2 Components... 3 Step 1 Marking out the Perimeter of the Carport... 3 Step 2a Footing Set-Out for Concrete Block Pad
What locks do I have Timber Doors
What locks do I have Timber Doors Introduction Locking mechanisms on doors are varied and it can be difficult to judge whether what you have is good, bad or indifferent. This information takes you through
4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
CI/SfB. (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems
Uniclass L4181 EPIC D181 CI/SfB (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems Interior Sliding Door Gears FOR CUPBOARDS, WARDROBES, INTERIOR SLIDING AND FOLDING DOORS A comprehensive range of
Mechanical Entry Locksets
Mechanical Entry Locksets We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Mechanical Entry Lockset Nexion Mechanical Entry Lever Options Nexion
SAFE-O-TRONIC access Door and furniture locking systems
Schulte-Schlagbaum AG Next level access since 1833 Product catalogue SAFE-O-TRONIC access Door and furniture locking systems SAFE-O-TRONIC access Product catalogue SAFE-O-TRONIC access Electronic Identification
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
FUTRUS WALL-MOUNT VANITY SINK SOLUTIONS WITH DUPONT CORIAN
FUTRUS WALL-MOUNT VANITY SINK MODEL FWS_3018R ADA PRODUCT SPECIFICATION The wall-mount vanity sink shall be made of Corian solid surface. Bathroom module shall be 30 (762 mm) in length, 18 (457 mm) in
1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS
By Denny Williams Photos by Denny Williams 1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS Denny Williams - Technical Writer Denny is first and foremost a dyed-in-thewool
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling Due to the many different configurations of cabed and non-cabed tractors this article
The complete range. Shower Hardware Doors & Partitions Balustrades Post Railings Glass Windscreens Glass Canopies
The complete range Shower Hardware Doors & Partitions Balustrades Post Railings Glass Windscreens Glass Canopies Serenity Series Sliding Door System Specifications Glass Thickness: 8mm or 10mm Toughened
Cluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
Decorative Lever Designs
Decorative Lever Designs 3 & C 4 & K 12 14 & D 15 & A 16 & B 17 50 51 52 53 54 55 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 2 www.stanleysecuritysolutions.com
Working Drawing and Assemblies. Chapter 10
Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.
FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT
-J070 REV. 0-0-0 FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT GENERAL Kit Number 9-09A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
WHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
MGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
Making Wooden Hinges
Making Wooden Hinges By Alex Reid - www.mokkou.jp Materials and tools used - 3.2mm straight router bit - 1/8 round-over router bit - Flush-cut straight bit (with bearing on bottom) - Finger-joint jig -
KITCHENS. Tip PAGE 1 FITTING YOUR KITCHEN GUIDE. How to mark out a kitchen. Tools required for installing a kitchen STEP ONE STEP TWO STEP THREE
FITTING YOUR KITCHEN GUIDE How to mark out a kitchen PAGE 1 Before starting on the installation, measure 870mm from the lowest point of the floor and mark a datum line around the room to indicate where
Wood Sound Retardant Door Hardware Information Bulletin
overly overly 574 West Otterman Street Greensburg, PA 15601 Toll Free: (800) 979-7300 Local: (724) 834-7300 Fax: (724) 830-2871 Email: overly@overly.com DOOR COMPANY Wood Sound Retardant Door Hardware
Build a Trade-Show Booth for Under $200!
Build a Trade-Show Booth for Under $200! This corner booth, with a seven foot front and sweeping 4x8 backdrop, assembles in less than 20 minutes and can be built in one weekend. Materials Tools 4 x8 x3/4
Re-board Accessories
Re-board Accessories Plastic Screws Plastic screws specially developed for 16 mm Re-board, but works with most thicknesses. A special version comes with a loop for hanging (only available in transparent
FLAT ROOF BOX SPAN CARPORTS
AGS/NC/03 FLAT ROOF BOX SPAN CARPORTS Thank you for choosing this quality product. We strongly recommend that you read these instructions thoroughly. Please take your time and do not rush the erection
TRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
SUPER SHED. Indoor shelter for your outdoor tools.
SUPER SHED Indoor shelter for your outdoor tools. Not everyone needs a garden shed. But, if you've no more space on your garage wall for that new leaf rake, if you can't find your potting trowel because
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing
DE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
Design + Security isis M100 security fittings Security fittings Security fittings for frame doors Security roses Security roses, flush fit
575 578 5 594 596 599 isis M security fittings Security fittings Security fittings for frame doors Security roses Security roses, flush fit 5b Overview 73 7374 Page 582 73 7375 Page 583 73 7376 Page 584
Gravity Racing Challenge STEM Team Competition Open Class High School Division Car Assembly Plans And Rules
Gravity Racing Challenge STEM Team Competition Open Class High School Division Car Assembly Plans And Rules 1 Table Of Contents Introduction...Page 3 Floorboard...Page 4 Step One Steering Stop Installation...Page
So here are the instructions after combining some web searches and the bindings that I have.
Installing Salomon SNS Pilot Sport Classic Cross Country Ski Bindings I have some old x-country skis with 3 pin nordic bindings that I no longer have the boots for. As such, I decided to get new boots
Etch Drawing Preparation
Etch Drawing Preparation Introduction Most etching companies prefer you to supply the drawing for your design in the form of a computer file. While some will still accept drawn or printed artwork, it is
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
TopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS
CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS Sunrise Medical is ISO 9001 certified, which ensures quality at all stages of the development and production of this hoist. Contents MODEL SERIAL NO.
Anodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
glass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
Basic Technical Fundamentals of Builders Hardware Mortise, Bored and Auxiliary Locks
Mortise, Bored and Auxiliary Locks Copyright 2002, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Page SARGENT History...................................................
TASTECH SERVICES LTD. Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public
TASTECH SERVICES LTD Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public Issue One Phone (03) 343 2122 e.mail: info@tastechservices.co.nz
WILDING WALLBEDS BUNK BED INSTALLATION INSTRUCTIONS
WILDING WALLBEDS BUNK BED INSTALLATION INSTRUCTIONS Instruction Booklet 18 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN POWERFUL LIFTING COMPONENTS. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE
ROOFING APPLICATION STANDARD (RAS) No. 150 PRESCRIPTIVE BUR REQUIREMENTS
ROOFING APPLICATION STANDARD (RAS) No. 150 PRESCRIPTIVE BUR REQUIREMENTS 1. 2. 3. 3.0 Scope 1.1 This application standard shall be used where the authority having jurisdiction has adopted its use, and
Basic Technical Fundamentals of Builders Hardware
Basic Technical Fundamentals of Builders Hardware Mortise Locks Bored Locks Auxiliary Locks Inside Cover (blank) Table of Contents SARGENT History...4 Basic Name of Products...5, 6 Doors (A Brief Review)...7
UNIVERSAL RAILING, STEEL
RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL
Modular Locomotive System Instruction Manual for HBK8 George Body Kit
Modular Locomotive System Instruction Manual for HBK8 George Body Kit Roundhouse Engineering Co. Ltd. Units 6-10 Churchill Business Park. Churchill Road, Wheatley. Doncaster. DN1 2TF. England. Tel. 01302
Call for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
Go-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
HINGE & TRIM. philihardware.com
HINGE & TRIM philihardware.com Residential Hinges 0.687" 0.360" 0.087" 1.406" 3 1 /2" 0.437" 1.406" 0.344" 1 /4" R 3 1 /2" 0.062" 0.781" 0.437" 0.087 RH3503 US3 1" 1" 4" 0.437" Plain Bearing 1/4 radius
Carton - Straight Link Machine Chain (Order Unit is Feet )
Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),
HOW TO MAKE A MOTOR BRACKET
HOW TO MAKE A MOUNTING BRACKET FOR AN ELECTRIC MOTOR Often, brackets supplied with purchased items (e.g. electric motors or servos) are not ideally suited for fitting into our models or they are not supplied
FIRE/LIFE SAFETY CLOSERS/HOLDERS SERIES
FIRE/LIFE SAFETY CLOSERS/HOLDERS SERIES PRODUCT SELECTION GUIDE SENTRONIC Series LCN closer/holders combine heavy duty closers with electrically controlled hold-open functions to control fire and smoke
Chapter 3 Installing Over-the-Post Railing on an L-Shaped Stair
49 Chapter 3 Installing Over-the-Post Railing on an L-Shaped Stair In this chapter: The Over-the-Post Balustrade System Determining the Rail Centerline Using Rail Bolts Making a Pitch Block Laying Out
Guidelines for Earthquake Bracing Residential Water Heaters
Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the
Lifetime Quality, Marine Grade 316 Stainless Steel Hardware
Lifetime Quality, Marine Grade 316 Stainless Steel Hardware Version B.03 Taking creativity, technology and engineering to a new level of excellence the Coastal Group has designed the blu range to match
BUILD A TABLETOP LOOM
BUILD A TABLETOP LOOM From 1" x 2" stock (actual 3/4" x 1"1/2) cut: 4 pieces 15" long 4 pieces 5"1/2 long Use the above to make 2 frames for the front and back of the loom. From 1" x 4" stock (actual 3/4"
Now Available through:
Now Available through: Adhesive- Mount s s Perma Dome Packages Perma Plate Packages Mini Plate Packages Convenience. Support. Security. The PC Guardian ADVANTAGE Flexible and expandable adhesive-mount
Key in Knob & Key in Lever
Key in Knob & Key in Lever We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents 530 Series Key in Knob & Key in Lever Door Furniture Locksets 930/950
Rack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
www.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
Installation Instructions for Wamilton s Steering Cable Modification. Remove the cables from the white retaining clip
Installation Instructions for Wamilton s Steering Cable Modification The steering cable on the 08 and later superjets is too short and limits the throw of the nozzle. By changing to an older style steering
Pole Lathe and Shave Horse Design
Pole Lathe and Shave Horse Design These pictures and accompanying words are Copyright Michael Hughes February 2002. They are not to be re-produced, in part or whole, without permission from the author.
Free 12 x 8 Shed Plan With Illustrations, Blueprints & Step By Step Details
Free 12 x 8 Shed Plan With Illustrations, Blueprints & Step By Step Details Brought To You By: MyShedPlans Click Here To Download 12,000 Shed Plans >> 12 x 8 Basic Shed This 8 12-ft. shed features a simple
Hollow or Cinder Block Wall Mount Job Aid
Summary This Job Aid covers: Hollow or Cinder Block Wall Mount Job Aid Hollow or Cinder Block wall Mount Bracket Installing the Mount Bracket into Cinder Block This Job Aid supports the Technician audience.
Novoferm Interior Doors and Frames Just what you re looking for
Novoferm Interior Doors and Frames Just what you re looking for Contents Novoferm interior doors 3 Super-Standard, Super-Plus, Super-Dekor and Super-Color interior doors 4 Also suitable for use as a magnetic
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
HORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
MACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)
MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer
Product Guide SaraDrill
Product Guide SaraDrill SARADRILL / A QUICK GUIDE Drilling from solid - a proven technology to drill large diameter holes on low horse power machines. Drilling from 49mm to 270mm diameter holes from solid
Modular mortice locks
Modular mortice locks UNION presents the 2C2 modular lock range. The DIN style locks accept Euro-profile cylinders and feature 72mm centres, a 55mm backset and a 20mm double throw deadbolt*. UNION 2C2
ILCO Cylinders. Cams and Tailpieces. Keyways. Finish Codes. 1 Standard (863G) Composite NB HR1. Composite NA R1064E. 2 Adams Rite (863A) Arrow AA 1179
Keyways Cams and Tailpieces Arrow AA 1179 Composite NA R1064E Composite NB HR1 1 Standard (863G) 2 Adams Rite (863A) Corbin 60 CA 1001EH Corbin CD 59A1-A2 Dominion DA S54F UB Lori L100 Eagle 11929 Harloc
INSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
AMS 120. EFT Guest Card Terminal & Refund unit
AMS 120 EFT Guest Card Terminal & Refund unit ACCOUNT MANAGEMENT STATIONS Wall mounted kiosk offering Visitor card purchase and refund Card deposit EFT purchase, refund and loading Full statement facilities