This is an initial Magnetic Testing course 1. issue of certification
|
|
- Noel Reynolds
- 7 years ago
- Views:
Transcription
1 05 Course Fees for Australia Penetrant PT Level PCN or AINDT PT Level PCN or AINDT This is an initial Penetrant course 4 months work experience in PT is required prior to (for direct entry to Level ) This is an initial Penetrant course months work experience in PT is required prior to 5 days days 750 Magnetic MT Level PCN or AINDT MT Level PCN or AINDT This is an initial Magnetic course 4 months work experience in MT is required prior to (for direct entry to Level ) This is an initial Magnetic course months work experience in MT is required prior to 5 days days 750 Radiographic Interpretation RIW Level PCN This is an initial Radiographic Interpretation course 6 months work experience in RI is required prior to (for direct entry to Level ) 7 days 665 Plate Tester UT Level PCN Plate Tester Thickness & Lamination Checking 4 months work experience is required prior to (for direct entry to Level ) 5 days $040 Ref: AUS Fees 05 v4 Lavender International NDT Consultancy Services Ltd 05 of 5
2 05 Course Fees for Australia Alternating Current Field Measurement & ACFM & PCN This initial course incorporates the Level examination during the two week programme as a requirement months work experience is required prior to. 0 days 6040 Eddy Current ETW Level PCN or AINDT ETW Level PCN or AINDT This is an Eddy Current initial course months work experience in ET is required prior to (for direct entry to Level ). This is an Eddy Current initial course 3 months work experience in ET is required prior to 0 days days 385 Eddy Current Tubes ET Tubes Level PCN This is an Eddy Current Tubes initial course months work experience in ET is required prior to (for direct entry to Level ). 0 days 605 ET Tubes Level PCN Upgrade This is an Eddy Current Tubes upgrade course for people holding current Eddy Current Level no additional work experience required. 5 days 3845 Ref: AUS Fees 05 v4 Lavender International NDT Consultancy Services Ltd 05 of 5
3 05 Course Fees for Australia Welds, Plate & Pipe UTW Level PCN (3. & 3.) UTW Level PCN or AINDT (3. & 3.) - Welds Plate & Pipe This 0 day programme is designed for students holding AINDT* certification in UT or with 5 years work experience - Welds Plate & Pipe This 8 day programme is designed for initial candidates months work experience in UT is required prior to (for direct entry to Level ) 0 days days 5500 UTW Level PCN or AINDT (3. & 3.) - Welds Plate & Pipe This 9 day programme is designed for initial candidates 3 months work experience in UT is required prior to 9 days 380 Nodes & Nozzles UTW Level PCN or AINDT (3.8 & 3.9) - Welds Nodes & Nozzles This 5 day programme is designed for initial candidates who have UTW PCN 3. and/or 3. Certification 5 days 995 Ref: AUS Fees 05 v4 Lavender International NDT Consultancy Services Ltd 05 3 of 5
4 05 Course Fees for Australia Advanced Phased Array PA Level PCN or AINDT Phased Array Welds This 4 day programme is designed for initial candidates holding UTW PCN Certification or accepted equivalent 3 months work experience in PA is required prior to. 4 days 755 Advanced Time of Flight Diffraction TOFD Level PCN or AINDT (Welds) Time of Flight Diffraction - Welds This 0 day programme is designed for initial candidates holding UTW PCN Certification or accepted equivalent months work experience in TOFD is required prior to. 0 days 605 Ref: AUS Fees 05 v4 Lavender International NDT Consultancy Services Ltd 05 4 of 5
5 05 Course Fees for Australia Penetrant PT PCN Recert Magnetic MT PCN Recert RECERTIFICATION day 665 day 665 Radiographic Interpretation RIW PCN Recert day 665 s UTW PCN Recert (This price is for categories. Additional category prices on request) Welds Plate and/or Pipe, Nodes and/or Nozzles Recertification examination including days (for categories) 3 days 560 Eddy Current ET PCN Recert Recertification examination including day days 05 *For candidates holding AINDT certification or accepted equivalent please send a copy of the certification for review in order for Lavender International to apply exemptions if applicable PAYMENT FOR THE IS REQUIRED IN FULL ALONG WITH THE COMPLETED PAPERWORK AND COPIES OF CERTIFICATION All course enquiries and bookings are made through Lavender International NDT Ltd (UK) nicola@lavender-ndt.com ** These fees are all inclusive no additional fees to that quoted above Ref: AUS Fees 05 v4 Lavender International NDT Consultancy Services Ltd 05 5 of 5
TWI INDIA CSWIP COURSE AND EXAMINATION FEES 2016 Course / Examination description. CSWIP 3.2 Senior Welding Inspector
TWI INDIA CSWIP COURSE AND EXAMINATION FEES 2016 Course / Examination description FEE CSWIP 3.0 Visual Welding Inspector Course and Examination Package 61,200 Exam only 26,500 Course Only 44,800 3.0 Retest
More information2015 SOUTH EAST ASIA CSWIP COURSE / EXAMINATION FEES. Welding Inspection
2015 SOUTH EAST ASIA COURSE / EXAMINATION FEES Welding Inspection 3.0 Visual Welding Inspector - Level 1 and Examination package 2420 2665 1320 835 Only 1815 1995 985 630 Examination 910 1000 495 315 Examination
More informationTraining: NDT Access Conditions
: NDT Access Conditions : MT, VT, PT Direct access to the course shall be granted if the candidate has passed both mathematics and science at Grade 10 (Proof of Grade 10 or equivalent such as N1; certificate
More informationTraining Course Schedule
Training Course Schedule 2016 AINDT EXAMS HELD AT THE END OF ALL ISO 9712 COURSES. INITIAL EXAM COSTS INCLUDED IN COURSE FEES. Satisfactory completion of an ATTAR training course is only part of the process
More informationNON-DESTRUCTIVE TESTING FULL SCOPE OF INTEGRATED NDT SERVICES
NON-DESTRUCTIVE TESTING FULL SCOPE OF INTEGRATED NDT SERVICES RIGHT SERVICE MAXIMUM RETURN Whether it is in fabrication, pipe manufacturing, pipeline, plant construction, chemical, petrochemical plants,
More informationGLOBAL INSPECTION AND CERTIFICATION
GLOBAL INSPECTION AND CERTIFICATION CONTENTS About us 3 Services 3 Lifting Equipment Inspection & Certification 3 Conventional & Advanced Non Destructive Testing (NDT) 4 Rig Inspection & Commissioning
More informationproper way. Therefore operator training and certification is key in every inspection program to ensure compliance and improve quality and integrity.
SGS NDT Training & Examination Centre Professional Services for Your Safety and Reputation ABOUT NON DESTRUCTIVE TESTING (NDT) About NDT NDT plays a key role in assessing conformity and reliability of
More informationReliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.
INDUSTRIAL SERVICES - NON-DESTRUCTIVE TESTING Reliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.com/ndt The reliability
More informationTechnical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories
ACCREDITATION SCHEME FOR LABORATORIES Technical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories Technical Notes NDT 001, Apr 14 The SAC Accreditation Programme is managed
More informationEN 4179/NAS 410 Interpretation
EN 4179/NAS 410 Interpretation The NANDTB has adopted NAS 410 / EN 4179 in lieu of AS 3669 as the standard for the qualification and approval of NDT technicians. Employers applying these standards sometimes
More informationGENERAL REQUIREMENTS FOR QUALIFICATION AND PCN CERTIFICATION OF NDT PERSONNEL
Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB United Kingdom Tel: +44(0)1604-893-811. Fax: +44(0)1604-893-868. E-mail: pcn@bindt.org PCN/GEN ISSUE 10 rev C IMPLEMENTATION
More informationMETALSCAN INSPECTION SERVICES SHORT TERM COURSES QA/QC ENGINEERS / INSPECTORS. Suitable for Mechanical Engineers
METALSCAN INSPECTION SERVICES Offers SHORT TERM COURSES For QA/QC ENGINEERS / INSPECTORS Suitable for Mechanical Engineers Free Seminar on QA/QC and NDT In every Month NDT Training and Certification Internship
More informationfor boilers From selecting the best NDT technique to monitoring inspection quality
Non-destructive testing for boilers From selecting the best NDT technique to monitoring inspection quality > Ensuring safe and efficient operation > Optimizing maintenance > Maximizing availability > Avoiding
More informationIMPLEMENTATION DATE 1 st OCTOBER 2015
PSL 57B ISSUE 7 APPLICATION FOR RECERTIFICATION OR SUPPLEMENTARY EXAMINATION, OR A RETEST OF A PREVIOUSLY FAILED EXAMINATION Certification Services Division Newton Building St George s Avenue Northampton
More informationChange Notice Revision 2 adds a definition of NANDTB, and acceptance of the National Aerospace NDT Board of Australia.
Advisory Circular AC43-8 Revision 2 Non-destructive Testing 27 February 2015 General Civil Aviation Authority advisory circulars contain information about standards, practices, and procedures that the
More informationApplication of Welding Standards in Hong Kong. S. K. Babu Laboratory Manager - Foundation Techniques Ltd
Application of Welding Standards in Hong Kong S. K. Babu Laboratory Manager - Foundation Techniques Ltd Introduction: This paper summarizes the current welding standards practiced in Hong Kong & also outlines
More informationNon-Destructive Testing
Non-Destructive Testing Bureau Veritas is one of the largest Testing, Inspection and Certification service providers in the world. First established in 1828, Bureau Veritas now spans the globe with a network
More informationTraining Academy. Course Handbook 2015. Certified and Informational Courses for effective Asset Care Management
Training Academy Course Handbook 2015 Certified and Informational Courses for effective Asset Care Management ALS Training Academy Course Handbook 2015 1 Our vision To increase the understanding and application
More informationIMPLEMENTATION DATE: 1 st OCTOBER 2015
PSL 57A: APPLICATION FOR INITIAL EXAMINATION WHEN COMPLETED, SUBMIT DIRECTLY TO THE PCN TEST CENTRE. DO NOT SEND TO BINDT Certification Services Division Newton Building NOTE: use PSL/57B for recertification,
More informationManage QA/QC department for onshore and
QA/QC & safety consultancy services Training services We provide consultancy services in QA/QC, safety and RBI services which include: NDT consultancy services Welding consultancy services RBI services
More information11. NONDESTRUCTIVE TESTING
11. NONDESTRUCTIVE TESTING Nondestructive testing includes magnetic particle testing (MT), Liquid Dye Penetrant testing (PT), Radiographic Testing (RT) and Ultrasonic Testing (UT). The purpose of nondestructive
More informationNon-destructive Testing ISO/IEC 17025 Application Document
Non-destructive Testing ISO/IEC 17025 Application Document July 2013 Copyright National Association of Testing Authorities, Australia 2013 This publication is protected by copyright under the Commonwealth
More informationSECTION III DIVISIONS 1 AND 2
SECTION III DIVISIONS 1 AND 2 Subject Interpretation File No. Division 1, NB-4250(c) (1998 Edition)....III-1-13-24 13-796 Division 1, NB-6114.3....III-1-13-22 12-2288 Division 1, NB/NC/ND/NE/NF/NG/WB/WC-5500,
More informationPressure Vessel acc. to PED for Chemical Industry fabricated in China
Pressure Vessel acc. to PED for Chemical Industry fabricated in China Kurt Schumacher ACHEMASIA 2013 Beijing May 14, 2013 Folie 1 Introduction Investment projects in the chemical/petrochemical industry
More informationNON-DESTRUCTIVE TESTING OF PIPELINES. L. Annila. Abstract
NON-DESTRUCTIVE TESTING OF PIPELINES L. Annila Abstract This paper shall present different, contemporarily available non-destructive testing (NDT) methods of pipelines and compare them to each other from
More informationCertification request for certification of NDT-Personnel
body for A. Personal Details on Candidate / on the person to be certified Name...... Familiy Name, given name Title Address...... Street, No. Postal Code, city...... Phone, Fax E-Mail Born on, -in... B.
More informationHOIS JIP for Improved NDT in the oil, gas & petroleum industries
HOIS JIP for Improved NDT in the oil, gas & petroleum industries Tor Harry Fauske (Statoil) Steve Burch, Project Manager (ESR Technology) www.hois2000.com ESR Technology Ltd HOIS Joint Industry Project
More informationEN ISO 9712 Level 3 INFORMATION PACKAGE
WENS QUALITY ASSURANCE PVT LTD (QUALIFICATION SERVICE DIVISON AQB of RTC) EN ISO 9712 Level 3 INFORMATION PACKAGE Hearty Welcome From WENS Quality Assurance Pvt Ltd Dear Candidates, WENS Group welcomes
More informationADVANCED NDT TECHNIQUES FOR PLASTIC PIPELINE INSPECTION
ADVANCED NDT TECHNIQUES FOR PLASTIC PIPELINE INSPECTION Eurico Assunção* Luisa Coutinho** Fredrik Hagglund *** Mike Troughton *** Malcolm Spicer*** *EWF, Oeiras, Portugal **TU-Lisbon, Instituto Superior
More informationUK National Aerospace NDT Board
UK National Aerospace NDT Board c/o The British Institute of NDT Newton Building, St George s Avenue Northampton, NN2 6JB United Kingdom Tel: +44 (0)1604-893-811 Fax: +44 (0)1604-893-868 E-mail: Nicole.scutt@bindt.org
More informationReach Higher with Inspection Academy GE s Inspection Technologies Global Knowledge Center. www.geinspectionacademy.com
Reach Higher with Inspection Academy GE s Inspection Technologies Global Knowledge Center www.geinspectionacademy.com Sharing knowledge. Shaping technology. At GE, we know the value of investing in your
More information1.2 For piping systems that operate at hoop stress of 20% or more of the Specified Minimum Yield Strength the following shall apply.
1.0 JOINT FIT-UP AND ALIGNMENT 1.1 For piping systems that operate at hoop stress of less than 20% and the internal adjoining ends do not vary more than 1 / 8 in. and adequate penetration and fusion can
More informationNON-DESTRUCTIVE TESTING LEARNING FROM THE PAST, MAXIMISING FUTURE BENEFITS.
NON-DESTRUCTIVE TESTING LEARNING FROM THE PAST, MAXIMISING FUTURE BENEFITS. Harry Bainbridge, Health & Safety Executive, Bootle Bernard McGrath, AEA Technology plc, Risley Crown Copyright 2001. Reproduced
More informationSTATEMENT OF WORK (SOW) On-Call Certified Welding Inspections and Nondestructive Testing
1.0 INTRODUCTION Colorado Springs Utilities (UTILITIES) is seeking qualified firms to provide verification welding inspection services, nondestructive testing services, and technical reporting to Colorado
More informationRG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing
This publication contains policy, recommendations and guidance applicable to UKAS accredited inspection bodies RG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing Contents Section
More informationNon-destructive Testing
CLASSIFICATION NOTES No. 7 Non-destructive Testing MARCH 2012 The electronic pdf version of this document found through http://www.dnv.com is the officially binding version The content of this service
More informationCourse Co-ordinator: For Whom This Course is Designed This Course is Designed For: Engineers Managers Supervisors P. 3
#198 Non Destructiive Testiing (NDT),, Non Destructiive Evalluatiion (NDE),, Petrolleum - Oiill and Gas - Piipelliines Inspectiion,, Briidges Inspectiion,, Oiill Gas Storage Tanks Testiing,, Raiill NDE
More informationSupplier Questionnaire Subcontracting
Subcontracting supplier profile - Business Annual gross sales Year Turnover [mil EUR] Export [mill EUR] Current year (planned)* Previous year* Two year ago* Department Number of employees Overall* 123
More informationNON DESTRUCTIVE TESTING LABORATORY, INC.
NON DESTRUCTIVE TESTING LABORATORY, INC. NON DESTRUCTIVE TESTING LABORATORY, Inc. (NDTL) was incrprated in 1995 t serve the increasing demands f the aviatin, shipping, cnstructin and manufacturing industry
More informationAEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING IRISH STANDARD I.S. EN 4179:2006.
IRISH STANDARD I.S. EN 4179:2006 ICS 49.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR Tel: +353 1 807 3800 Fax:
More informationBCS Professional Certification. May 2015. Copyright BCS 2013 Page 1 of 5. Subject Access Request Policy
BCS Professional Certification May 2015 Copyright BCS 2013 Page 1 of 5 Version 1.0 May 2013 CONTENTS 1. POLICY... 3 2. SCOPE... 3 3. WHAT INFORMATION AM I ENTITLED TO REQUEST USING A SAR?... 3 4. WHAT
More informationSeawater corrosion resistant piping systems for large diameters up to 100 / 2.5 metres O.D.
OSNA -10 Copper-Nickel Lined Pipes Seawater corrosion resistant piping systems for large diameters up to 100 / 2.5 metres O.D. KME Germany AG & Co. KG Copper-Nickel Lined Pipes [GB] Member of the KME Group
More informationAdvanced NDT Solutions. Oil & Gas. Products Systems Services
G r o u p, I n c. Advanced NDT Solutions Oil & Gas Products Systems Services 1 ASSET PROTECTION SOLUTIONS Centers of Excellence MISTRAS Group, Inc. ADVANCED NDT PRODUCTS, SYSTEMS & SERVICES FOR THE OIL
More informationRehabilitation of the Iraqi Specialized Institute for Engineering Industries in Baghdad Governorate
United Nations Development Group, International Trust Fund PROGRAMME NARRATIVE PROGRESS REPORT -2011 Rehabilitation of the Iraqi Specialized Institute for Engineering Industries in Baghdad Governorate
More informationPart 1: Manual Ultrasonic Inspection
BEST PRACTICE FOR THE PROCUREMENT AND CONDUCT OF NON-DESTRUCTIVE TESTING Part 1: Manual Ultrasonic Inspection GAS AND PROCESS SAFETY TECHNOLOGY DIVISION November 2000 The recommendations contained in this
More informationNON-DESTRUCTIVE TESTING OF DUPLEX STAINLESS STEEL
NON-DESTRUCTIVE TESTING OF DUPLEX STAINLESS STEEL AUTHORS: Keith Doughten, District Manager, Magnetic Analysis Corporation, ASNT NDT Level III ET, UT David Bauer, Marketing and Training Manager, Magnetic
More informationTERMS AND CONDITIONS FOR AWARDING COFREND/COSAC CERTIFICATES IN THE AEROSPACE SECTOR CCA PP 94 001
COMITE SECTORIEL AEROSPATIAL DE CERTIFICATION - Agents de Contrôle Non Destructif Approuvé par la CONFEDERATION FRANCAISE POUR LES ESSAIS NON DESTRUCTIFS REVISION: 06 12/ 2009 TERMS AND CONDITIONS FOR
More informationPIPELINE INSPECTION UTILIZING ULTRASOUND TECHNOLOGY: ON THE ISSUE OF RESOLUTION By, M. Beller, NDT Systems & Services AG, Stutensee, Germany
ABSTRACT: PIPELINE INSPECTION UTILIZING ULTRASOUND TECHNOLOGY: ON THE ISSUE OF RESOLUTION By, M. Beller, NDT Systems & Services AG, Stutensee, Germany Today, in-line inspection tools are used routinely
More informationProfile and Capabilities
Profile and Capabilities right solutions right partner Profile ALS Industrial is one of Australia s leading providers of asset reliability and integrity services and is comprised of two complementary business
More informationSECTION III, DIVISIONS 1 AND 2
SECTION III, DIVISIONS 1 AND 2 Subject Interpretation File No. Division 1, Code Case N-792, Fatigue Evaluations Including Environmental Effects....III-1-10-69R 11-1584* Division 1, NB-1130, Boundaries
More informationNumerical simulation of nondestructive testing, an advanced tool for safety analysis
Numerical simulation of nondestructive testing, an advanced tool for safety analysis Gérard Cattiaux, Thierry Sollier Institut de Radioprotection et de Sûreté Nucléaire (IRSN) Reactor Safety Division BP
More informationsiemens.com/energy Houston Service Center An integral part of the Siemens Global Service Network
siemens.com/energy Houston Service Center An integral part of the Siemens Global Service Network Our network of world-class repair facilities offers the most advanced equipment and OEM engineering talent
More informationInnovative Technologien zur Erzeugung und Verwertung von Biogas
Großmann Ingenieur Consult GmbH Innovative Technologien zur Erzeugung und Verwertung von Biogas Offshore Technologies and Steelworks Stainless Steel and Aluminum Surface Finishing Design and Engineering
More informationLooking into other Industries Qualification of NDT for Swiss Nuclear Utilities
4th International Symposium on NDT in Aerospace 2012 - Th.2.B.4 Looking into other Industries Qualification of NDT for Swiss Nuclear Utilities Klaus DRESSLER, Daniel ALGERNON, Philip KICHERER SVTI Swiss
More informationMATERIALS SCIENCE AND ENGINEERING Vol. III Non-Destructive Testing and Evaluation of Metals - G.A. Georgiou
NON-DESTRUCTIVE TESTING AND EVALUATION OF METALS G.A. Georgiou Jacobi Consulting Limited, London, UK Keywords: Castings, coatings, eddy current, forgings, in-service, inspection, liquid penetrant, magnetic
More information\ srl High Technology Gear Reducers and Cardan Shafts CERTIFIED QUALITY SYSTEM: UNI ISO EN 9001:2008 ICIM 2779/2; IQNET N. IT-28236 UNIVERSAL SHAFT
UNIVERSAL SHAFT CAT CERTIFICATION CARDAN SHAFTS - COUPLINGS Alongside with the production of special gearboxes, our company has developed the production of Universal shafts, with the same high quality
More informationASSET INTEGRITY MANAGEMENT
ASSET INTEGRITY MANAGEMENT Gove Alumina Refinery Rope Access Asset Integrity Inspection & Maintenance Providing inspection and maintenance solutions using rope access and advanced rigging techniques in
More informationLiquid Hydrogen Pressure Vessel Analysis
OAK RIDGE NATIONAL LABORATORY Liquid Hydrogen Pressure Vessel Analysis Claire R. Luttrell 9/18/2007 1.0 INTRODUCTION An SNS experiment is being designed that includes a 20 liter liquid hydrogen (LH2) target.
More information3 Year On-Call Steel Fabrication Inspection Services. Request for Proposal. Iowa Department of Transportation
3 Year On-Call Steel Fabrication Inspection Services Request for Proposal Iowa Department of Transportation Introduction The Iowa Department of Transportation s Office of Materials is interested in Certified
More informationTHE VALUE OF DICONDE IN MULTI-MODAL NDT ENVIRONMENTS
THE VALUE OF DICONDE IN MULTI-MODAL NDT ENVIRONMENTS Matthias JOBST, Andrea KOETZ and Sue CLENDENING GE Sensing & Inspection Technologies GmbH, Hürth, Germany, Skaneateles, and Lewistown USA History Abstract:
More informationNONDESTRUCTIVE INSPECTION OF HULL WELDS
Guide for Nondestructive Inspection of Hull Welds GUIDE FOR NONDESTRUCTIVE INSPECTION OF HULL WELDS SEPTEMBER 2011 (Updated February 2014 see next page) American Bureau of Shipping Incorporated by Act
More informationDNVGL-OS-C401 Edition July 2015
OFFSHORE STANDARD DNVGL-OS-C401 Edition July 2015 Fabrication and testing of offshore structures The electronic pdf version of this document found through http://www.dnvgl.com is the officially binding
More informationUltrasonic Backscatter and Phased Arrays for Detection of High Temperature Hydrogen Attack
Ultrasonic Backscatter and Phased Arrays for Detection of High Temperature Hydrogen Attack by Anmol S. Birring, NDE Associates, Inc., Houston, USA Mathieu Riethmuller, Institut de Soudure, Paris, France
More informationTEST REPORT Pipe-abc Line Inspection Project
TEST REPORT Pipe-abc Line Inspection Project Client YYYYYY / XX Facility Pipe-abc Cooling Spool Item Inspected General Pipe Inspection Method SLOFEC Date Commenced November 2007 Date Completed November
More informationCURRENT EXPERIENCE IN TYPICAL PROBLEMS AND FAILURES WITH BOILER PIPING COMPONENTS AND SUPPORTS
A DB RILEY TECHNICAL PUBLICATION CURRENT EXPERIENCE IN TYPICAL PROBLEMS AND FAILURES WITH BOILER PIPING COMPONENTS AND SUPPORTS by James P. King, Design Manager DB Riley, Inc. Presented at the 1998 ASME
More informationSPECIALIZED GAMMA-RAY FLAW DETECTOR «DAR - Se75 FN R» WITH. RADIATION SOURCE Se-75
SPECIALIZED GAMMA-RAY FLAW DETECTOR «DAR - Se75 FN R» WITH RADIATION SOURCE Se-75 Khoroshev V.N.; Volchkov J.E.; Dekopov A.S.; Kositsyn E.M., Fedotov V.I. «Open Joint Stock Company Scientific Research
More informationBODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION May and September, 2016 and January 2017 (Replaces May 2015) API Authorized Pressure Vessel Inspectors must have a broad knowledge
More informationASSET INTEGRITY. asset integrity. Asset Condition Evaluation Tools. Life Cycle Integrity. Conductor Stabilisation Solution
ASSET INTEGRITY asset integrity Asset Condition Evaluation Tools Life Cycle Integrity Conductor Stabilisation Solution Inspection and Integrity Management Non-Destructive Testing In-Service Pipeline Inspection
More informationNon-Destructive Testing Services, Inc. www.nondestructivetesting.com
Non-Destructive Testing Services, Inc. www.nondestructivetesting.com NON-DESTRUCTIVE TESTING SERVICES (NDTS) Non-Destructive Testing Services, Inc. (NDTS) is a full-service inspection company providing
More informationTesting & Consulting Engineering. NDT Industrial Environmental D.O.T, Construction & Mechanical. www.unifiedtesting.com
Testing & Consulting Engineering NDT Industrial Environmental D.O.T, Construction & Mechanical www.unifiedtesting.com NONDESTRUCTIVE TESTING (NDT) SERVICES UTS Nondestructive Testing (NDT) Services provides
More informationNON DESTRUCTIVE TESTING & ASNT WELD INSPECTION & AWS
NON DESTRUCTIVE TESTING & ASNT WELD INSPECTION & AWS What is ASNT? What is ASNT? The American Society for Nondestructive Testing, Inc. What is ASNT? ASNT is the world's largest technical society for nondestructive
More informationIndiana Boiler and Pressure Vessel Safety Section Frequently Asked Questions
Indiana Boiler and Pressure Vessel Safety Section Frequently Asked Questions What are the licensing requirements for boiler operators? Answer: Indiana statute (IC 22-15-6) and administrative rules (680
More informationUltrasonic Guided Waves Evaluation of Trials for Pipeline Inspection
17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China Ultrasonic Guided Waves Evaluation of Trials for Pipeline Inspection Francisco C. R. MARQUES 1, Alessandro DEMMA 2 1 E&P
More informationWelding & Fabrication. School of Mechanical & Environmental Engineering
Welding & Fabrication School of Mechanical & Environmental Engineering Your Local College The facts 14,000 students meet new people 3 Centres all easy to access Hundreds of courses something for everyone
More informationPart 2: Magnetic Particle and Dye Penetrant Inspection
BEST PRACTICE FOR THE PROCUREMENT AND CONDUCT OF NON-DESTRUCTIVE TESTING Part 2: Magnetic Particle and Dye Penetrant Inspection GAS AND CHEMICAL PROCESS SAFETY TECHNOLOGY DIVISION April 2002 The recommendations
More informationTRAINING COURSE SERIES No. 13. Guidebook for the Fabrication of Non-Destructive Testing (NDT) Test Specimens
TRAINING COURSE SERIES No. 13 Guidebook for the Fabrication of Non-Destructive Testing (NDT) Test Specimens INTERNATIONAL ATOMIC ENERGY AGENCY, 2001 The originating Section of this publication in the IAEA
More informationBODY OF KNOWLEDGE API-653 ABOVEGROUND STORAGE TANK INSPECTOR CERTIFICATION EXAMINATION November 2015, March 2016 and July 2016 (Replaces October 2013)
BODY OF KNOWLEDGE API-653 ABOVEGROUND STORAGE TANK INSPECTOR CERTIFICATION EXAMINATION November 2015, March 2016 and July 2016 (Replaces October 2013) API Authorized Aboveground Storage Tank Inspectors
More informationCertification Application for the Certification of NDT Personnel Acc. to DIN EN ISO 9712
for NDT-Personnel Certification Application for the Certification of NDT Personnel Acc. to DIN EN ISO 9712 A. Details of candidate / person to be certified Name...... surname, first name title Address......
More informationINNOVATIVE ELECTROMAGNETIC SENSORS
Technical Progress on INNOVATIVE ELECTROMAGNETIC SENSORS FOR PIPELINE CRAWLERS Type of Report: Technical Progress Report Reporting Period Start Date: October 7, 2003 Reporting Period End Date: April 30,
More informationStandard Recommendations for Pressure Part Inspection During a Boiler Life Extension Program
Standard Recommendations for Pressure Part Inspection During a Boiler Life Extension Program M.N. Hovinga G.J. Nakoneczny Babcock & Wilcox Barberton, Ohio, U.S.A. Presented to: ICOLM (International Conference
More informationEddy-current testing - Non-destructive testing for flaw detection of metals, coatings and carbon fibres
Technology Offer Eddy-current testing - Non-destructive testing for flaw detection of metals, coatings and carbon fibres Summary A German SME offers the development of task specific eddy-current based
More informationQuality Control System Manual For ASME CODE SECTION VIII (DIVISION I), - U VESSEL FABRICATION. <Your Address Line 1> <Your Address Line 2>
Quality Control System Manual For ASME CODE SECTION VIII (DIVISION I), - U VESSEL FABRICATION Edition No. 1 Issued Manual Number 1 Table of Contents
More informationASSet InteGrIty MAnAGeMent PArtnerInG to AChIeve your InSPeCtIOn, engineering, data MAnAGeMent And SAfety GOAlS WWW.SGS.COM/AIM
asset integrity management Partnering to achieve your inspection, engineering, data management and safety goals WWW.SGS.COM/AIM ASSET INTEGRITY MANAGEMENT AIM An asset has integrity when it is operated
More informationScope of accreditation
Den ackrediterade OFP verksamhet kan utföras både i Dekras egna lokaler samt i fält. De egna lokalerna finns på följande platser: / The accredited NDT activities can be performed both at Dekras permanent
More informationASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
More informationNON DESTRUCTIVE TESTING TECHNIQUES FOR RISK BASED INSPECTION
NON DESTRUCTIVE TESTING TECHNIQUES FOR RISK BASED INSPECTION 1 F. Van den Abeele 1 and P. Goes 1 OCAS N.V., J.F. Kennedylaan 3, 9060 Zelzate, Belgium Abstract Ensuring the safety of offshore structures
More informationAccreditation. For Non-Destructive Testing
Publication Reference EA-4/15 G:2015 Accreditation For Non-Destructive Testing PURPOSE This publication provides detailed guidance for bodies carrying out non-destructive testing as an accredited activity
More information(IATA-ATC) FOO CRM PPC (OJT)
(IATA-ATC) IR CPL PPL LPR CRM MD DRM MD FOO MD CRM PPC MD E&E A&P (OJT) SDCS ULD (IATA- DGR). ISAGO SAFA IOSA 5s ICDL IT (Emission) APU Tester Training.iranair.com Email: info.training@iranair.com Basic
More informationSupporting New Build and Nuclear Manufacturing in South Africa
ASME Nuclear Codes and Standards Supporting New Build and Nuclear Manufacturing in South Africa Sandton, South Africa, October 7-8, 2008 Session 3 Section III - Component Design and Construction Ralph
More information2000/018 OFFSHORE TECHNOLOGY REPORT. POD/POS curves for non-destructive examination HSE
HSE Health & Safety Executive POD/POS curves for non-destructive examination Prepared by Visser Consultancy Limited for the Health and Safety Executive OFFSHORE TECHNOLOGY REPORT 2000/018 HSE Health &
More informationSERVICES. Delivering Asset Protection Solutions
Refinery & Petrochemical Solutions Power Generation Solutions Tank and Terminal Solutions SERVICES Delivering Asset Protection Solutions Smart Grid Solutions NDE/NDT Inspection Testing Engineering Services
More informationNon Destructive Testing Consultancy Welding Materials Testing Training
Non Destructive Testing Consultancy Welding Materials Testing Training Introduction Applied Inspection is an ISO 9001:2008 and Link-Up accredited company providing non-destructive testing and training,
More informationSurveillance Report. Bascule span to the Railway bridge Jernbanebroen over Limfjorden
Transportudvalget 2013-14 TRU Alm.del endeligt svar på spørgsmål 192 Offentligt Surveillance Report Package / Item: Bascule span to the Railway bridge Jernbanebroen over Limfjorden Supplier: Purpose of
More informationN o n d e s t r u c t i v e T e s t i n g
N o n d e s t r u c t i v e T e s t i n g Olympus NDT designs manufactures and globally markets a range of innovative nondestructive testing instruments developed with a commitment to technology, design,
More informationETCAL Level 3 NVQ Diploma in Engineering Technical Support (QCF) Qualification No 600/2285/1 Credit Value 80 GLH 311. Qualification Structure
ETCAL Level 3 NVQ Diploma in Engineering Technical Support (QCF) Qualification No 600/2285/1 Credit Value 80 GLH 311 Qualification Structure Unit Number Unit Title Unit Credit Value/GLH QCF Unit Number
More informationRisk-Oriented Methodology for Creating a 10-Year Shut-Down Interval. Risk. Application Case within the Chemical Industry
Risk-Oriented Methodology for Creating a 10-Year Shut-Down Interval Application Case within the Chemical Industry Contact: Dr.-Ing. Robert Kauer TÜV Industrie Service GmbH TÜV Süd Group robert.kauer@tuev-sued.de
More information