LED Products Catalogue Energy Efficient LED lights

Transcription

1 LED Products Catalogue Energy Efficient LED lights LED Street Lights LED Tube Lights LED Down Lights LED Spot Lights LED High bay Light LED Panel Lights LED Flood Lights LED Globes Sales: Technical: Address: Web: Tel: Cell: Marnes: Tel: , Cell: , 212 Sysie road, Derdepoort, Pretoria

2 LED Lights The future of lighting LED - Light Emitting diodes are electronic devices that converts electricity into light. LED lights are more energy efficient and longer lasting than traditional lights and are suited to residential, commercial and industrial lighting purposes. As LED lights emit less heat than conventional light bulbs, less energy is wasted which makes them easier on your electricity bill. Advantages of LED lights: Save on electricity usage and cost LED Lights uses 65% less electricity compared to florescent lights, and 90% less electricity compared to incandescent lights. Save on lamp replacement cost The operational life of LED lamps is to hours. That works out to 4-6 years of continuous operation, or 8-12 years of 50% operation. The long operational life of a LED lamp is a stark contrast to the average life of an incandescent bulb, which is typically 2000 hours and fluorescent which is typically 6000 hours. Thus on average LED lights last 15 times longer than incandescent lamps and 5 times longer than fluorescent lamps. Save on maintenance and labour Due to the long operation life of LED lights, means it need replacing much less often than fluorescent of incandescent lights. This can mean a big saving on maintenance and labour cost, especially if special equipment is needed to replace lamps such as high bay lamps or street lamps. Return on investment Although the initial cost might be slightly higher than that of a traditional incandescent and fluorescent bulbs, the extra cost will be repaid within two years from electricity savings, and the bulbs should not need replacement for 10 years. Save on operating cost Save up to 40% in total operating cost, considering the savings in electricity, labour and replacement costs Mercury-free - unlike fluorescent and most HID technologies, LEDs contain no hazardous mercury or halogen gases High efficiency - LEDs are now available that reliably offers over 100 lumens from a one-watt device, and even much higher outputs at higher drive currents Small size - provides design flexibility, arranged in rows, rings, clusters, or individual points High durability - no filament or tube to break.

3 LED Compared to traditional florescent lights Save electricity usage and cost Uses 65% less electricity compared to florescent lights. Save on lamp replacement cost Lifetime of more than h compared to Save on labour Only needs replacing every 10 years compared to annually. Break even after only 2.9 years Recover you initial investment after 2.9 years. Save up to 40% in total operating cost Considering electricity, labour and replacement costs. LED Tube Lights Replaces regular fluorescent tube lights Save electricity usage and cost Uses 65% less electricity compared to florescent lights. Save on lamp replacement cost Lifetime of more than h compared to Save on labour Only needs replacing every 10 years compared to annually. Break even after only 2.9 years Recover you initial investment after 2.9 years. Save up to 40% in total operating cost Considering electricity, labour and replacement costs. LED tube compared to regular fluorescent tube LED Tube Power Consumption 18W 40W Life Span 50000Hrs 6000Hrs UV Radiation No Yes Regular Fluorescent Tube Ra 80% Plus Round 30% Working Temperature Ballast No Yes Starter No Yes Operating Frequency No Flickering 50-60Hz Light-on Time 0.4S 3S-5S Colour Purity High Low

4 Cost to benefit comparison between LED tube lights and fluorescent tube lights. Example comparing 100 x 40 W fluorescent tube lights to equivalent 18 W LED tube lights Variables used: Number of lights: 100 lights Operating hours per day: 8 hours Number of days per year: 300 days Cost of electricity: 80c per kwh Initial Cost per light LED R Fluoresecnt R R R R R R R R LED lights initially cost 23 times more than fluorescent tube lights but... Life Span in Hours LED h Flourescent h LED Lights last 8 times longer than Incandescent lights. Electricity Cost per year LED R Flourescent R R R R R R R R R R LED lights use 55% less electricity than fluorescent lights. Total operating costs per tube, per year LED R Flourescent R R R R R R R R R R R R That is an 39% saving in total operating costs.

5 LED Street Lights Energy saving LED street lights, utilizes high power LED s as a light source. These state of the art LED street lights can be directly connected with an VAC power supply or alternatively it can be powered by an optional Solar Panel Kit. The following factors make LED lights a greener option than traditional florescent lights: low power consumption a lifespan of up to hours and no hazardous chemicals such as phosphorous vapours, lead or mercury Day light (left) & Night LED Light (right) LU1 75W power consumption. Replaces 250W High Pressure Sodium (HPS) lamp. Luminous flux lm LU2 75W power consumption. Replaces 250W High Pressure Sodium (HPS) lamp. Luminous flux lm LU4 150 watt power consumption. Replaces 250 watt High Pressure Sodium (HPS) Lamp. Luminous Flux lm LU6 225 watt power consumption. Replaces 400watt High Pressure Sodium (HPS) lamp. Luminous Flux lm Our LED street lights can easily be adapted to run from solar power. SP90 Light bulb 36 watt power consumption. Replaces 75/150W High Pressure Sodium (HPS) lamps. Luminous flux 2100 lm For replacement in existing luminaires & LU1 luminaire

6 Models and specifications LED Tube Lights Benefits: Work without ballast and starter. Save over 60% electricity cost in total. Connects directly to the 240 Volt AC power Fits in a standard fluorescent tube fitting Over 50,000 hours lifespan (that's more than 10 year at 12hour per night!). Input voltage can be 24V DC or 240V AC. Eco-friendly (No dangerous metals or gasses such as mercury vapour) LED compared to Fluorescent: 8 W LED = 20 W Fluorescent 12 W LED = 30 W Fluorescent 18 W LED = 40 W Fluorescent 24 W LED = 56 W Fluorescent 28 W LED = 65 W Fluorescent 36 W LED = 85 W Fluorescent Product Code Power consumption Lumens Size Width Double Sided T Watt 660 lm 600mm (2 feet) 30mm No T Watt 1600 lm 1200mm (4 feet) 30mm No T Watt 2100 lm 1500mm (5 feet) 30mm No T Watt 600mm (2 feet) 30mm Yes T Watt 1200mm (4 feet) 30mm Yes LED Tube Fitting We stock a range of LED tube fittings. These fittings is very cost effective as there is no electronic starters or ballasts. LED tubes connects directly to 220V. Product Description Code F mm (2 feet) - Single F mm (2 feet) - Double F mm (4 feet) - Single F mm (4 feet) - Double F mm (5 feet) - Single F mm (5 feet) - Double

7 LED Spot Lights Product Code MR16 SP50 SP70 SP80B SP80 Power Consumption 3 Watt 5 Watt 10 Watt 15 Watt Lumens 170 lm 190 lm 250 lm 500 lm 750 lm Incandescent Equivalent 25 Watt 25 Watt 40 Watt 75 Watt 100 Watt Dimensions Luminescenc e Angle ᴓ 50mm x 45mm ᴓ 50mm x 71mm ᴓ 70mm x 99mm ᴓ 80mm x 159mm ᴓ 80mm x 200mm Working Voltage 12 V AC/DC 12, 24 V AC/DC or VAC Emission Colour Pure White, Warm White, Red, Yellow, Green or Blue Pure White or Warm White Colour Temperature Pure White K, Warm White K Lamp Lens Lamp Cup Radiator Acrylic Aluminium Alloy Lamp Base GU 5.3 E27, E14, GU 10 E27 Certification CE, RoHs CE, RoHs, UL CE, RoHs

8 LED Flood Lights Applications Factories Gymnasiums Security lighting Billboard illumination Etc Features: Natural colour Tough And Durable Toughened Glass Cover Life span > 50,000 Hours Single High Powerful LED Light Source Die-cast aluminium housing for strength Vacuum Metallic-Membrane Plating Reflector Specifications Light source: Single Ceramic LED Array Input voltage: 12 VDC or VAC Material: Aluminium alloy body with glass cover Insulation Grade: Class 1 Protection Grade: IP65 Working Environment: -40~55 degrees Colour Temperature: 5500 Kelvin Colour Renden of Index : >80 Ra Beam Angle: 50 Degrees Light Efficiency: >90% Models and specifications Product Code FL10 FL20 FL50 Power consumption 10 Watt 20 Watt 50 Watt Size L x W x H (mm) 115 x 86 x x 190 x Weight (kg) Lumens 850 lm 1700 lm lm

9 LED panel lights Applications Replacement for traditional fluorescent lights. Offices Classrooms Museums Airports Art galleries Specifications Colour: Warm White/Cool White Colour Temperature: 2800K-6500K Voltage: AC 90~264V LED Source: Taiwan Lumenmax,SMD3014 Beam Angle: 120 degree Models and specifications Product Code PL300x300 PL300x300B PL300x600 PL600x600 Power consumption 15 Watt 15 Watt 40 Watt 80 Watt Size L x W x H (mm) 300 x 300 x x 300 x x 600 x x 600 x12 Lumens 900 lm 900 lm 2700 lm 4700lm Battery backup No Yes No No

10 LED Lights Information Fitting Types All lights is available in various different fitting types. (On request and in large quantities) Colour Preference Warm White (same colour as traditional light bulbs) Pure White (same colour as traditional fluorescent lights) Voltage Most lights are available in either 12 V DC or 240 V AC Warranty Statement Carima Products warrants all newly purchased products to be completely free from any defects or faults. This warranty will be valid for a period of two years from date of purchasing from Carima Products or any of its approved distributors. This warranty includes all repair work on the products and replacement of components as Carima Products may find to be necessary after thorough inspection of faulty due to improper installation. Any faulty product will be covered and repaired under warranty, which is delivered at Carima Products workshop in Derdepoort, Pretoria or to any of their designated agent/distributor countrywide. The warranty does not cover any shipping costs or labour charges by any other company, for removal and installation of the products. Carima Products will only take responsibility for installations done by their own qualified technicians or approved contractors. No responsibility will be taken for faults arising from either any other installation done by the client itself or any unauthorized agent. Proper proof of purchase must be provided with any warranty claim submitted to this company. This is the only valid warranty agreement and will Carima Products not take any responsibility for damages or losses that might arise from any defects or faults on products. For any enquiries contact us: Sales: Technical: Address: Web: Tel: , Cell: , sales@carima.co.za Tel: , Cell: , info@carima.co.za 212 Sysie road, Derdepoort, Pretoria