Hazard Gard EVLL Series Explosionproof LED Luminaires

Transcription

1 Hazard Gard EVLL Series Class I, Division factory-sealed LED Cl. I, Div., Groups B, C, D Cl. I, Zone, Groups IIB + IEC / ATEX () The EVLL LED Family Hazard Gard EVLL Series LED Luminaires are designed to provide full-spectrum, crisp, white light. Five versions of the EVLL LED are available, providing ideal solutions for a wide range of applications. Equivalent HID Luminaire W-5W MH 5W-75W HPS/MH 75W-5W MH EVLLL 5W-W HPS/MH EVLLL W HPS/MH PS Typical Energy Savings Up to 6% Applications: Five lumen outputs for replacement of existing HID luminaires Locations requiring continuous and consistent light levels in extreme ambient temperatures Areas requiring frequent on-and-off of lights Where flammable vapors, gases, ignitable dusts, fibers or flyings are present; indoors or outdoors Where extremely corrosive, wet, dusty, hot and/or cold conditions exist NEMA 4X, marine, wet locations, and hose-down environments Manufacturing plants; heavy industrial, chemical, petrochemical or pharmaceutical facilities; platforms; loading docks; tunnels; outdoor wall and stanchion mounted general area lighting EVLL LED Benefits: Industry best for ease of installation Quick-connect design install and wire the mounting module, then simply screw in the luminaire Factory-sealed no external sealing fittings required in Groups B, C, and D Adapter available for connection to existing Hazard Gard EVI, EVLP, and EVM modules Reduce operation and maintenance costs Energy-efficient up to 6% reduction in energy used versus equivalent HID fixtures 6, hours rated life eliminates need for frequent lamp replacement Reliable performance in any environment Shock- and vibration-resistant solid-state luminaires have no filaments or glass components that could break greatly reduces the risk of premature failure temperature rating Operating ambient -5 C to C Certifications and Compliances: NEC and CEC Class I, Division, Groups B, C, D Class I, Zone, Groups IIB + Class II, Groups E, F, G Class III, UL Standards UL844 Electric Fixture Hangers for Hazardous Locations UL598 Luminaires UL598A Luminaire for Installation on Marine Vessels CSA Standard CSA C. No. 7 Environmental Ratings NEMA 4X IP66 Marine and Wet Locations IEC and ATEX Certifications and Protection () Ex II G Ex d IIC (Zone, ) () Ex II D Ex td A IP66 (Zone, ) () Standard Materials: Body and mounting modules copperfree aluminum with Corro-free epoxy powder coat Lens shatter-resistant, explosionproof glass Gaskets silicone Guard stainless steel External hardware stainless steel Factory-sealed* *Refer to Installation and Maintenance Sheet for external seal requirements. LED System: High brightness light emitting diode (LED) arrays Color temperature: K (CRI 8) and 56K (CRI ) options available Advanced heat sink design ensures LED does not exceed manufacturer s temperature ratings across all specified ambient conditions LM-79 and LM-8 reports available Electrical Ratings: Voltage Input Amps (Max.) Power Factor Input Power Lumen Output EVLLL EVLLL -77VAC, 5 / 6 Hz 8-5VDC -77VAC, 5 / 6 Hz 8-5VDC -77VAC, 5 / 6 Hz 8-5VDC -77VAC, 5 / 6 Hz 8-5VDC -77VAC, 5 / 6 Hz 8-5VDC W 5 W 675 W 9 5W 5 75W 5 94 US: CAN: Copyright Eaton s Crouse-Hinds Business

2 94-95.qxp /6/ 6:5 PM Page 95 Class I, Division factory-sealed LED Cl. I, Div., Groups B, C, D Cl. I, Zone, Groups IIB + IEC / ATEX () Installation and replacement made simple Modular design - This contractor-friendly design is ideal for both new construction applications and retrofit. These luminaires use the same mounting modules as existing Hazard Gard Series luminaires. The quickconnect design facilitates installation - install and wire the mounting module, then screw in your luminaire. Two start Acme threads ease and reduce installation time. High efficiency and lumen output Driver module assembly - High efficiency LED drivers are designed to provide reliable operation in even the harshest environments. Various AC and DC input voltage options are available to suit virtually any drive requirement. Safe, reliable heat transfer Heat sink - Enhanced heat sink design provides safe and effective heat transfer from the LED assembly to the outside environment, ensuring low LED junction temperature, reliability and sustained lumen performance. NEMA 4X rated LED housing assembly - The LED housing is constructed of durable die cast aluminum, providing an efficient thermal path to the heat sink assembly. The impact-resistant lens is sealed from the outside environment and provides ingress protection against water and dust. Multi-die LED arrays are used to provide energy-efficient, long-life white light. Optional color temperatures Warm (available on 5L through L models only) and cool white color temperatures available. US: CAN: Copyright Eaton s Crouse-Hinds Business 95

3 96-97.qxp /6/ 6:54 PM Page 96 Class I, Division factory-sealed LED Cl. I, Div., Groups B, C, D Cl. I, Zone, Groups IIB + IEC / ATEX () Catalog Numbering System: SERIES LAMP OUTPUT LED COLOR MOUNTING MODULE HUB SIZE GUARD VOLTAGE EVLL 5L C A /UNV SERIES EVLL SUFFIXES Explosionproof Vaportight Low Profile LED Luminaire LAMP OUTPUT 5L 5, Lumen Output 7L 6,75 Lumen Output 9L 9, Lumen Output L,5 Lumen Output L,5 Lumen Output LED COLOR C Cool (56K nominal) W Warm (K nominal) (available on 5L through L models only) MOUNTING MODULE A Pendant EVSP BX Wall Bracket EVSW CX Ceiling Mount EVSC 96 J M Blank Stanchion EVSJ Mounting Module Adapter EVSA (See Note #) No Mounting Module Supplied HUB SIZE 5 5 Blank 4 NPT (Pendant, Ceiling, and Wall Only) NPT (Pendant, Ceiling, and Wall Only) NPT (Stanchion Only) 5 mm (Pendant, Ceiling, and Wall Only) mm (Pendant, Ceiling, and Wall Only) Leave Blank for Mounting Module Adapter and No Mounting Module GUARD No Guard Stainless Steel Notes: VOLTAGE (See Note #) /UNV VAC to 77VAC 5/6 Hz, 8VDC to 5VDC. EVSA Adapter for use with existing Eaton s Crouse-Hinds EVI, EVLP, and EVM mounting modules. SUFFIXES S8 Trunnion Mount. Accessory kit EVLL47/48 K (step down transformer in separate enclosure) is available for 47V and 48V 6 Hz applications. US: CAN: Copyright Eaton s Crouse-Hinds Business

4 96-97.qxp /6/ 6:54 PM Page 97 Cl. I, Div., Groups B, C, D Cl. I, Zone, Groups IIB + Class I, Division factory-sealed LED IEC / ATEX () Dimensions (In Inches): Ceiling Mount Pendant Mount Wall Mount Stanchion Mount [4.5] 9.5 [8.].6 [4] [9.] [66.] [9.6] [4.5].7 [4.4] [67.8] [5].9 [78.4] 4.9 [4.8] Ø 6 [44.4] Ø 6. [44.4] Ø 6. [45.].59 [4.9].46 [7.7] 6.5 [454.6] 7.9 [459.5] 8.9 [7.6] Ø 6.5 Ambient Temperature: Weights: Lbs. EVLLL EVLLL Add Mounting Modules: Pendant Ceiling Stanchion Wall Adapter Max. Ambient Temp. ºC Cl. I, Div. Cl. II, Div. & / Simu. Presence Cl. I, Zone EVLLL EVLLL Family Tree: EVMJ4 EV EV EVMP EVMP EVJ EV EV EV87 EVSJ5 EVSA EVSC EVSC5 EVSC EVSC EVSW EVSW EVSW5 EVSW US: CAN: EVSP EVSP EVSP5 EVSP Copyright Eaton s Crouse-Hinds Business 97

5 Hazard Gard EVLL Series Class I, Division factory-sealed LED Cl. I, Div., Groups B, C, D Cl. I, Zone, Groups IIB + IEC / ATEX () Photometric Data: POLAR PLOT CANDELA (EVLLLCA/UNV) DISTANCE TO MOUNTING HEIGHT Isofootcandle chart shows illuminance in footcandles at ground level (EVLLLCA/UNV) ISOFOOTCANDLE CHART Footcandle Values for Isofootcandle Lines A B C D E F ZONE (DEGREES) LUMENS % OF LUMINAIRE - 4.7% % % -9 5.% Mtg. Hgt. A B C D E F % -8 5.% LUMEN OUTPUT FOR OTHER EVLL LED LUMINAIRES Luminaire Series System Watts Lumens 8W 5 W 675 W 9 EVLLL 5W 5 EVLLL 75W 5 98 US: CAN: Copyright Eaton s Crouse-Hinds Business