JCB BACKHOE LOADER MINI CX
|
|
- Collin Andrews
- 7 years ago
- Views:
Transcription
1 STATIC DIMENSIONS Machine model Mini ft-in (mm) A Height to Canopy 7-0 (2125) B Transport Height 7-0 (2125) C Transport Length (4530) D Overall Width (over Tires) 4-10 (1470) Machine model Mini ft-in (mm) E Wheelbase 5-1 (1559) F King post pivot pin to center of rear axle 2-1 (630) G Distance to center of front tires 3-7 (1080) H Distance to center of rear tires 3-7 (1095)
2 A Approach angle 75.4 B Interface angle/ramp to ground plane 127 C Departure angle 19 o GROUND LINE ANGLES OPERATING WEIGHT AND MACHINE RATING lb (kg) Weight 3373 (1530) Loader rated operating capacity 1488 (675) ENGINE CONTROLS Loader: Single lever controls all loader functions, positioned to the right hand side of the operator s seat for ease of operation. Backhoe: Standard JCB Plus pattern control is logical as well as easy to both learn and operate. Optional ISO Plus pattern controls. Stabilizer levers are easy to operate and are positioned between the primary backhoe controls. LIGHTING AND ELECTRICS 12 volt direct electric starting with 40 amp alternator and standard thermostart aid. Heavy duty harness with secured sealed connectors for protection against both water and dust ingress. The connectors conform to IP69 standards. Standard battery 26 amp hour low maintenance. Ignition and working lights control switches mounted on the central control panel. Also incorporated in the central control panel are the hour meter and warning light cluster which includes a warning buzzer to draw operator s attention to malfunction. Located under the driver seat is a well protected fuse box designed to keep dirt and grime out. TRANSMISSION Hydrostatic transmission, giving zero to maximum travel speed, both forward and reverse at full power. Operated by a simple two pedal system the speed of the machine is governed by how far the pedal is pressed. The transmission also acts as the primary braking system. Travel speeds forward: 0-6.2mph Travel speed reverse: 0-3.7mph Three cylinder, indirect injection diesel. Naturally aspirated, water cooled. Tier II Compliant Model Engine Family 4H3XL V Engine Type KD20/2800 Displacement in 3 (cm 3 ) 58.2 (954) No. of cylinders 3 Power ratings SAE J rpm hp (kw) 20.5 (15.1) SAE J1349 and EEC 80/ rpm hp (kw) 20 (14.7) Torque Ratings SAE J rpm lbf ft (Nm) 43 (58) SAE J1349 and EEC 80/ rpm lbf ft (Nm) 41.5 (56.5) Engine conforms to 2004 US EPA and California regulations pertaining to off-road compression ignition engines. Full ROPS/FOPS canopy includes: Fully adjustable static seat Seat belt Exceptional all round visibility Ergonomically designed controls OPERATOR ENVIRONMENT
3
4 BACKHOE DIMENSIONS AND PERFORMANCE A SAE Maximum dig depth ft-in (mm) 8-4 (2540) SAE Maximum dig depth 2ft flat bottom ft-in (mm) 8-2 (2499) B SAE Reach ground level to rear wheel center ft-in (mm) 12-3 (3740) C SAE Reach ground level to center of king post pin ft-in (mm) 10-2 (3110) D SAE Reach at full height to swing center ft-in (mm) 6-8 (2025) E SAE maximum loadover height ft-in (mm) 7-4 (1918) F SAE maximum working height ft-in (mm) 9-6 (2894) Swing arc degrees 180 SAE Bucket breakout force lb (kg) 1308 (2884) SAE Dipper breakout force lb (kg) 1506 (3320) LOADER DIMENSIONS AND PERFORMANCE M Dump height ft-in (mm) 5-8 (1732) N Loadover height ft-in (mm) 6-7 (2017) O Pin height ft-in (mm) 7-1 (2150) P Reach at ground level ft-in (mm) 3-4 (1010) Q Maximum reach at full height ft-in (mm) 3-6 (1065) R Reach at full height - fully dumped ft-in (mm) 3-0 (920) S Dig Depth ft-in (mm) 0-3 (65) T Rollback at ground level degrees 36.5 U SAE dump angle degrees 30 SAE loader bucket breakout lb (kg) 3607 (1636) SAE maximum hydraulic lift capacity lb (kg) 3444 (1562) Bucket capacity yd 3 (m 3 ) 0.30 (0.25)
5 BRAKES The JCB hydrostatic transmission provides the primary braking service, which is engaged simply by releasing either drive pedal. An independent rear axle mounted disk and calliper type parking brake, operated by an automotive style lever to the left of the operator seat, acts as secondary braking service. STEERING Full power hydrostatic system utilizing the fixed displacement pump via a steering priority valve. In the event of engine failure, emergency steering is maintained. Steering Axles front Steering turns lock to lock 3.25 Turning radius outside tires ft-in (mm) 19-2 (5842) Turning radius outside loader bucket ft-in (mm) 23-6 (7163) TIRES Standard Front: 23 x ply Standard Rear: 400/ ply traction tire Both standard tires have a general purpose tread pattern, which provides optimum traction with minimum ground disturbance. Optional Rear: 31 x ply turf tire Optional Front: 23 x ply turf tire STANDARD EQUIPMENT ROPS/FOPS canopy Hand throttle Seatbelt Turning static seat, 180 turn JCB Plus backhoe controls Warning light and buzzer to monitor key system functions Neutral start interlock system 12V Auxiliary power socket Horn Loader bucket float Work lights HYDRAULICS A fixed displacement pump is mounted on the main hydrostatic pump, which in turn is mounted directly to the engine. The fixed displacement pump supplies oil to steering, excavator and backhoe services and returns to tank through a full flow filter. Main Pump 2200 rpm gpm (l/min) 6.34 (24) Main Pump flight gpm (l/min) 8.45 (32) System working pressure Backhoe and Loader psi (bar) 2900 (200) OPTIONAL EQUIPMENT Auxiliary hydraulic supply to loader Auxiliary hydraulic supply to backhoe Pin-mounted 6-in-1 shovel Flashing beacon ISO backhoe controls SERVICE CAPACITIES gal (ltr) Hydraulic system incl. tank 14 (53) Fuel tank 7.7 (29) Cooling system 0.98 (3.7) Engine oil with filter 0.92 (3.5) Rear axle 0.37 (1.41)
6 A GLOBAL COMMITMENT TO QUALITY JCB s total commitment to its products and customers has helped it grow from a one-man business into the World s 5th largest manufacturer of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors. By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in the World. By leading the field in innovative research and design, extensive testing and stringent quality control, JCB machines have become renowned all over the world for performance, value and reliability. And with a global sales and service network of over 400 distributors and agents, the company exports over 70% of its production to all five continents. Through setting the standards by which others are judged, JCB has become one of Britain s most impressive success stories. HELPING YOU GET THE JOB DONE! JCB Headquarters Savannah, 2000 Bamford Blvd., Pooler, GA Tel: Fax: JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States and Canada. The JCB logo is a registered trademark of J C Bamford Excavators Ltd.
JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS
OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationKubota Tractor B50 Cab
Tractor B50 Cab Engine B2650HSDC 2520R 25 B3350HSDC 3320 3040 Engine gross power HP 26 24.2 27 33 32.8 40 36.2 PTO power HP 19.5 18.0 19.9 27 25 32 29.0 No. of cylinders 3 3 3 4 3 4 3 Mahindra 3616 Engine
More information4500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty
4500 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 ECONOMY - 4500 Series The
More informationSKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
More informationJCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
More informationS KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
More informationSKID STEER LOADER CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @
More information221E. w/45% transfer on front axles Front axle Differential ratio 3.66 Planetary ratio 6.00 Final axle ratio 22.00
221E ARTICULATED WHEEL LOADER TIER III CERTIFIED I SERIES 3 ENGINE Model Case 432T/M3 Type 4-stroke Cylinders 4 Bore/Stroke 3.89 in x 4.09 in (99 X 104 mm) Displacement 195 in 5 (3.2 L) Fuel injection
More informationSkid Steer Loader CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm
More information303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)
More informationJCB TELESCOPIC WHEELED LOADERS TM310, TM310S, TM220 AND TM180
JCB TELESCOPIC WHEELED LOADERS TM30, TM30S, TM220 AND TM80 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability
More information216B/226B/236B Series 3 242B/252B Series 3
216B/226B/236B 242B/252B Skid Steer Loaders 216B 226B 236B 242B 252B Engine Engine Model Cat C2.2 Cat C2.2 T Cat C3.4 DIT Cat C3.4 DIT Cat C3.4 DIT Net Power (SAE 1349/ISO 9249) 35 kw (47 hp) 42 kw (56
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More information303.5E CR, 304E CR, 305E CR, 305.5E CR
303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw
More information304.5. Mini Hydraulic Excavator
304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator
More information303.5C CR Mini Hydraulic Excavator
303.5C CR Mini Hydraulic Excavator Engine Model Mitsubishi S3Q2-T Rated net power 29 kw 39 hp (ISO 9249) Weights Operating weight 3790 kg 8,355 lb with canopy Operating weight 3910 kg 8,620 lb with cab
More informationTechnical Description LR 611 Crawler Loader
Technical Description LR 611 Crawler Loader Engine output 66 kw/90 HP Bucket capacity 1.0 1.2 m 3 /1.31 1.57 cu.yd. Hydrostatic travel drive The Better Machine. Diesel Engine Liebherr-Diesel Engine D 924
More informationJCB TRACKED EXCAVATOR JS130 L T.A.B.
MAX. OPERATING WEIGHT NETT ENGINE POWER 13900 kg 63 kw (85 hp) J D E K F C G L A B H I STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 2780 (9-1) B Undercarriage overall length
More informationPC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
More informationJCB WHEELED EXCAVATOR JS160W MONOBOOM & TAB
MAX. OPERATING WEIGHT NETT ENGINE POWER 17820 kg (39286 lb) 92 kw (123 hp) G E F I H D C J A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels 1330 (4-4) B External
More informationVOLVO WHEEL LOADERS BLOCK HANDLING
VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially
More information304C CR Mini Hydraulic Excavator
304C CR Mini Hydraulic Excavator Engine Model Mitsubishi S4Q2 Rated net power 31 kw 42 hp (ISO 9249) Weights Operating weight 4800 kg 10,582 lb with canopy Operating weight 4920 kg 10,844 lb with cab Weight
More informationE08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationWHEELED EXCAVATOR JS175W
WHEELED EXCAVATOR JS175W MAX. OPERATING WEIGHT: 18120 kg (39948 lb) ENGINE POWER: 128 kw (172 hp) G E F I H D C STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels
More informationHydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
More information308E CR SB. Mini Hydraulic Excavator with Swing Boom
308E CR SB Mini Hydraulic Excavator with Swing Boom Engine Weights Engine Model Cat C3.3B Operating Weight with Cab 8333 kg 18,371 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications Maximum
More informationx60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3)
x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3) ENGINE perkins TIER 3 1104D-44TA 1104D-44TA 1104D-44TA 1104D-44TA ELECTRONIC INJECTION MAX. ENGINE POWER (ISO RATING) HP/KW 92,5 / 68 102 / 75 110 / 81 112
More information307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights
307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800
More informationNEW! WORKMASTER Tractors WORKMASTER 45 WORKMASTER 55
NEW! WORKMASTER Tractors WORKMASTER 45 WORKMASTER 55 WORKMASTER Tractors Dependable power Available in 39 and 47 PTO horsepower, WORKMASTER tractors offer reliable power to handle a wide variety of chores.
More informationKUBOTA DIESEL ZERO-TURN MOWER ZD21/ZD28. Turf Care Professionals can now enjoy the ultimate in zero-turn efficiency.
R KUBOTA DIESEL ZERO-TURN MOWER ZD ZD21/ZD28 Turf Care Professionals can now enjoy the ultimate in zero-turn efficiency. For you, cutting the grass is simply not a weekend chore. It s your business. The
More informationSITE DUMPERS PRODUCT RANGE
SITE DUMPERS PRODUCT RANGE MORE THAN JUST A DUMPER High performance and reliable water cooled diesel engines for smooth and economical operation Large opening service doors for best in class service access
More informationSPACIOUS CABIN TEMPERATURE TELESCOPIC
THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce
More informationENGINE POWERED 5-10t. ~ r"." - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100
HELl ENGINE POWERED 5-10t I; ~ r"." d- - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 STANDARD SPECIFICATION Manufacturer HUI HELl ca., LTD. Model CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 Load Capacity
More informationJCB TRACKED EXCAVATOR JS130 LC
MAX. OPERATING WEIGHT NETT ENGINE POWER 13428 kg 70 kw (94 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 2880 (9-5) B Undercarriage overall
More information7-SERIES PNEUMATIC 8,000 17,500 LBS
8,000 17,500 Truck Dimensions 11,000 17,500 Specifications 7FGAU/7FDAU50 L M N J I FS A H B C out 0.5 9.5 Capacity Center Capacity Center out 153.7 174. 100 100 2.4 15. 18.5 100 100 1.2 173.4 19 100 100
More informationL-1350 LOADER SPECIFICATIONS. 84,000 lbs (38,102 kgs) 28 yd 3 (21.41 m 3 ) Standard Operating Capacity. L-1350 Rev 9/04
L-1350 Rev 9/04 LOADER SPECIFICATIONS Note: Optional equipment shown in photo. L-1350 84,000 lbs (38,102 kgs) 28 yd 3 (21.41 m 3 ) Standard Operating Capacity POWER MODULE PROPULSION SYSTEM DIESEL POWER
More informationPC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³
PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product
More informationRH 12.5 RH 16.5. Crawler Excavator Specifications
Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic
More informationVOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910
More information906H2, 907H2, 908H2. Compact Wheel Loaders
906H2, 907H2, 908H2 Compact Wheel Loaders Engine 906H2 907H2 908H2 Engine Model Cat C3.3B DIT* Cat C3.3B DIT* Cat C3.3B DIT* Rated Net Power @ 2,500 rpm SAE J1349 51 kw (68 hp) 51 kw (68 hp) 51 kw (68
More informationRT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
More information910K, 914K. Compact Wheel Loaders
910K, 914K Compact Wheel Loaders 910K 914K Engine Model* Cat C3.8 Turbo Cat C3.8 Turbo Maximum Gross Power: ISO 14396 (DIN) 72 kw (98 hp) 72 kw (98 hp) SAE J1995 73 kw (97 hp) 73 kw (97 hp) Bucket Capacity
More informationL-2350 LOADER SPECIFICATIONS. 160,000 lbs (72,574 kgs) 53 yd 3 (40.52 m 3 ) Standard Operating Capacity. L-2350 Rev 9/04
L-2350 Rev 9/04 LOADER SPECIFICATIONS Note: Optional equipment shown in photo. L-2350 160,000 lbs (72,574 kgs) 53 yd 3 (40.52 m 3 ) Standard Operating Capacity POWER MODULE PROPULSION SYSTEM DIESEL POWER
More informationRT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features
USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ ft working radius Maximum boom length: 126 ft Maximum tip height: 1 ft CONTENTS Page: Key...3 Dimensions Crane
More informationCX (T3), great performance for unlimited versatility
CX90-100-110 (T3) The CX range is equipped with the new TIER-3 compliant Perkins 1104D series turbo engines. With powers of up to 102 hp, the new engines provide exceptional power and torque levels. The
More informationCOMPACT & UTILITY TRACTOR LOADERS 235TLA I 240TLA I 250TLA I 110TL I 250TL I 615TL I 625TL
COMPACT & UTILITY TRACTOR LOADERS 235TLA I 240TLA I 250TLA I 110TL I 250TL I 615TL I 625TL COMPACT & UTILITY TRACTOR LOADERS LOADER COMPATIBILITY 235TLA 240TLA 250TLA BOOMER 20, BOOMER 25 BOOMER 30, BOOMER
More informationJCB TRACKED EXCAVATOR JS220 LONG REACH
MAX. OPERATING WEIGHT NETT ENGINE POWER 23742 kg (52342 lb) 128 kw (172 hp) E L D G F M H N C I K A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LC SC A Track length on ground 3660 (12-0) 3370
More informationM26 T/30 T M40 T/50 T
M26 T/30 T M40 T/50 T Rough terrain specialist Capacity from 2600 kg to kg Lifting height from 3 m to 6 m 2- or 4-wheel drive models Motorization Turbo Euro III M: true rough terrain trucks The M trucks,
More information584 / 584HD. Forwarders. Engine. Operating Weight 584 6WD 20 230 kg 44,600 lb 584 8WD 22 498 kg 49,600 lb 584HD 23 088 kg 50,900 lb
584 / 584HD Forwarders Engine Engine Model Cat C7 ACERT Gross Power 204 kw 274 hp Operating Specifications Load Capacity 584 18 000 kg 39,683 lb Load Capacity 584HD 20 000 kg 44,092 lb Operating Weight
More informationElectric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60
Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60 Safety To adapt to different operating conditions and customer requirements, all performance parameters are adjustable.
More informationnet flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000
More information160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ)
160 ATJ 180 ATJ 160 ATJ 180 ATJ MANITOU, the world leader in materials handling, has the ability to accompany you on all types of terrain. The 160 and 180ATJ models have been developed to respond to all
More information226D/232D/236D/ 242D/246D/262D
226D/232D/236D/ 242D/246D/262D Skid Steer Loaders Engine 226D 232D 236D 242D 246D 262D Gross Power (SAE J1995) 50.1 kw 67.1 hp 50.1 kw 67.1 hp 55.4 kw 74.3 hp 55.4 kw 74.3 hp 55.4 kw 74.3 hp 55.4 kw 74.3
More informationVOLVO BACKHOE LOADER BL0 BUILT FROM EXPERIENCE. For over 0 years, people have looked to Volvo Construction Equipment for productive, profitable machines. The tradition continues with the Volvo BL0 Backhoe
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
More information921F/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation
921F/XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Model FPT F4HFE6131 Tier 4 interim certified Fuel #2 Diesel (#1 & 2 mixture permitted for cold temperature) Does not require ultra-low sulfur fuel
More informationJCB WHEELED LOADING SHOVEL 456ZX
MAX. ENGINE POWER: MAX. OPERATING WEIGHT: 161kW (216hp) 21335kg (47036lb) MAX. LOADER CAPACITY: 3.5m 3 (4.6yd 3 ) STATIC DIMENSIONS Standard height arm STATIC DIMENSIONS High lift arm G G J F J F E E H1
More informationT-SERIES BACKHOE LOADER 570T THE DAWN OF A NEW ERA. www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842
T-SERIES BACKHOE LOADER 570T THE DAWN OF A NEW ERA www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842 1 T-SERIES BACKHOE LOADER The family gets wider: The 570T makes available all the well known CASE
More informationD6R Series III Track-Type Tractor
D6R Series III Track-Type Tractor Engine Engine Model Cat C9 ACERT Net Power ISO 9249 138 kw 185 hp Engine XL/XW/LGP Net Power ISO 9249 149 kw 200 hp Weights Operating Weight 18 669 kg 41,159 lb Shipping
More informationVOLVO WHEEL LOADERS L20F, L25F
VOLVO WHEEL LOADERS L20F, L25F ON TO YOUR NEXT PERFORMANCE. The Volvo L20F and L25F compact wheel loaders are built to give your productivity a needed lift. The right power. The right performance. It s
More informationLANDPOWER, TIER 3 ENGINES AND ELECTRONIC TRANSMISSION FOR IMPRESSIVE PERFORMANCE.
, TIER 3 ENGINES AND ELECTRONIC TRANSMISSION FOR IMPRESSIVE PERFORMANCE. The new LandPower tractor has been redesigned with the adoption of the new F.P.T. Tier 3 engines and of an electronically-controlled
More informationPneumatic Forklift Trucks D15G / D18G G15G / G18G. 1,500kg to 1,750kg Capacity
Pneumatic Forklift Trucks D15G / D18G G15G / G18G 1,500kg to 1,750kg Capacity Improve your Material Handling Performance with DOOSAN Forklifts! High Performance, Great Productivity, Energy Efficient, Superior
More informationRX 60 Technical data.
RX 60 Technical data. Electric forklift trucks RX 60-40 RX 60-45 RX 60-50 Achieve more. RX 60 Technical Data. This specification sheet to VDI Guidelines 2198 only gives the technical figures for the standard
More informationCONSTRUCTION EQUIPMENT SOLUTIONS GOVERNMENT
CONSTRUCTION EQUIPMENT SOLUTIONS GOVERNMENT nacasegovsales@casece.com Contract # GS-30F-0006U 1-888-614-3202 and # GS-07F-170CA www.casece.com 1 GOVERNMENT SOLUTIONS FOR HEAVY EQUIPMENT GSA CONTRACT TERMS
More informationWith an excellent weight-to-power ratio of 37 kg/hp, the C-L model is ideal for general field work, as well as for PTO and transport applications.
Specially designed for farming applications with state-of-the-art technical solutions, the new Perkins engines meet the Tier 3 emission standards, while providing high power and torque levels with low
More informationTRAILER MATE SPECIFICATIONS. TM50 2-Wheel Drive 3-Wheel Drive
TRAILER MATE SPECIFICATIONS TM50 2-Wheel Drive 3-Wheel Drive TABLE OF CONTENTS TM50 2-WD / 3-WD Specifications / Dimensions. 1 General Specifications.... 2 Weights / Travel Speed / Tilt Table Degrees /
More informationNew MITSUBISHI Compact Tractor range: Strong, versatile, reliable, valuable. Made in Japan
AGRICULTURE GARDENING New MITSUBISHI Compact Tractor range: Strong, versatile, reliable, valuable. Made in Japan ENGINE Engine Nº of Cylinders Displacement Rated RPM (25) Water Cooled Diesel 1,125 cc 2,500
More informationHydrostatic Drive Diesel/LPG Trucks 8,000-10,000 lbs. H40D/T H45D/T H50D/T
Hydrostatic Drive Diesel/LPG Trucks 8,000-10,000 lbs. H40D/T H45D/T H50D/T 394 Series Introduction The new generation of heavy duty H40, H45, and H50 forklifts, redefine the meaning of performance. Impressive
More informationJeep Renegade Technical specifications
Jeep Renegade Technical specifications Specifications are based on the latest product information available at the time of publication. All dimensions are in millimeters at curb weight and with standard
More informationCold milling machine W 1000 F. Technical specification
Cold milling machine W 1000 F Technical specification Technical specification 2 Cold milling machine W 1000 F on four wheels Cold milling machine W 1000 F on four crawler tracks Milling width max. mm 1,000
More informationSTATE OF MINNESOTA PRICE PAGE (Typed Response Required)
SPEC #422-1214 T-628(5) Tractors, Sub Compact Utility STATE OF MINNESOTA PRICE PAGE (Typed Response Required) December 19, 2014 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone
More informationHYDRAULIC EXCAVATOR. ZAXIS-2 series
ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable
More informationR 994 B. Technical Description Hydraulic Excavator
Technical Description ydraulic Excavator R 994 B litronic` Operating weight with backhoe attachment 296,00 t/652,570 lb Operating weight with shovel attachment 300,50 t/662,490 lb Engine output 1500 P
More informationERIES 9 Z-FAHR S DEUT
DEUTZ-FAHR SERIES 9 The new era of productivity. 2 Unparalleled performance, efficiency and productivity. Deutz Fahr answers once again to the evolving requirements of modern agriculture, which calls
More informationZAXIS series HYDRAULIC EXCAVATOR
ZAXIS series HYDRAULIC EXCAVATOR Model Code: ZX30 / ZX35 / ZX40 / ZX50 Engine Rated Power: 19.9 kw (26.7 HP) / 19.9 kw (26.7 HP) / 26.5 kw (35.5HP) / 26.5 kw (35.5HP) Operating Weight: 2 880-3 030 kg /
More informationACCUMULATOR INSTALLATION
7001-7 ACCUMULATOR INSTALLATION BRAKE ACCUMULATORS I 308L93 Rae 7-59710 Issued 6-93 Printed in U.S.A 7001-8 Removal ACCUMULATOR VALVE 1. Park the machine on a level surface and lower the. loader bucket
More informationFTheBetterMachine. Technical Description R 992. Hydraulic Excavator
Technical Description R 992 litronic` Hydraulic Excavator Operating weight with backhoe attachment 138,8 143,0 t Operating weight with shovel attachment 141,2 146,3t Engine output 575 kw/782 HP Bucket
More information11,000 kg, 13,000 kg, 16,000 kg Diesel, Pneumatic Tire
R Pneumatic Diesel Forklift Trucks D110/130/160S-5 11,000kg to 16,000kg Capacity D110 / 130 / 160S-5 11,000 kg, 13,000 kg, 16,000 kg Diesel, Pneumatic Tire Printed in Repubic of Korea PSC2604D0(Feb.2007)
More informationNew criteria of forklift trucks
Dimension Specification Identification 1.1 Manufacturer 1.2 Manufacturer s type designation 35D7E 40D7E 45D7E 50D7AE 1.3 Drive: electric (battery or mains),diesel,petrol,fuel gas,manual 1.4 Type of operation:hand,pedestrian,standing,,orderpicker
More informationBACKHOE / INDUSTRIAL LOADERS
Price quote for: BACKHOE / INDUSTRIAL LOADERS Vendor Name: Trueman Welters Contact Person: Jon Ferris Street Address: 1600 Hwy 55East P.O. Box: City, State, Zip Buffalo MN 55313 Phone #: 763-682-2200 Toll
More information17,500-33,000 lb Capacity Diesel Pneumatic Tire Lift Trucks
17,500-33,000 lb Capacity Diesel Pneumatic Tire Lift Trucks Relentless Performance Make short work of big jobs with durable, heavy-duty Cat lift trucks. Built to last, they feature a rugged 131-horsepower
More information821F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.
821F Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Type Cylinders Bore/Stroke FPT F4HFE613 Tier 4 Final 4-stroke, turbocharged and air-to-air cooled 6-cylinder
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationSKID STEER SPEC GUIDE
SKID STEER SPEC GUIDE ASV Inc. RC-50 $29,000 Caterpillar, 50 1,500 3,000 16.3 100 60 77 115 4,750 R-50 $28,000 Perkins, 50 1,500 3,000 16.3 100 60 77 115 4,750 RC-30 $22,000 Caterpillar, 31.5 800 1,600
More informationC18 ACERT Fire Pump Tier 3 448 bkw/600 bhp @ 1750 rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More informationLaden Container Handler Gantry Truck Capacity 36000 40000 kg C 360 C 400 SERIES 356
Laden Container Handler Gantry Truck Capacity 36000 40000 kg C 360 C 400 SERIES 356 Safety Interlocks in the spreader twistlocks prevent un-intentioned container release; sensors in the lift system prevent
More informationIn today s fast moving world, there is a. low cost and on time, to satisfy the needs. Simple to Use, Easy to Maintain and
Range Overview 1.3-2.0t Three Wheel Electric Forklift Trucks www.utilev.com Utility you can trust TM In today s fast moving world, there is a constant drive to have goods transported from one location
More informationCat Electronic Technician 2015C v1.0 Product Status Report 2/16/2016 9:19 AM
Cat Electronic Technician 2015C v1.0 Product Report 2/16/2016 9:19 AM Product Report Product ID Comments Unavailable H2A00626 3054 M313C (CRX13565) H2A00626 Engine Serial Number CRX13565 ECM Serial Number
More informationHR46 HARVESTER. Thinning Specialist
HR46 HARVESTER Thinning Specialist The history of Sampo Rosenlew forest machines Sampo Rosenlew today The founder of Sampo Rosenlew, mr Timo Prihti was born and raised on a farm. In Finland this means
More informationGeneral Dimensions and Weights - Non Loader
Home > Equipment > Tub Grinders > TG5000 TG5000 Specs General Dimensions and Weights - Non Loader Maximum Length - Transport 39.2' 12 m Maximum Length - Conveyor Unfolded 61.1' 18.6 m Maximum Width (Transport)
More informationCushion Tyre Forklift Range 1.5 to 7.0 ton
1.5 to 7.0 ton Availability and specifications are determined regionally and are subject to change without notice. Please consult your authorised Toyota distributor for details. - Dentsu Brussels - 1/720/010/10077
More informationMINING & OFF-HIGHWAY TRUCKS
MINING & OFF-HIGHWAY TRUCKS PART A Caterpillar Performance Handbook Edition 44 800.437.4228 www.hawthornecat.com 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective
More informationC20/25/30. IC-PNEUMATIC LPG/DIESEL 4000 / 5000 / 6000 lbs. (2000 / 2500 / 3000 kg)
CQ C20/25/30 IC-PNEUMATIC LPG/DIESEL 4000 / 5000 / 6000 lbs. (2000 / 2500 / 3000 kg) With four turns lock-to-lock the hydrostatic power steering provides the operator with excellent maneuverability and
More informationNEW 8029 CTS Compact Excavator
NEW 8029 CTS Compact Excavator Operating Weight: 6321Ib (2867kg) Net Engine Power: 22.1hp (16.5kW) Mini but mighty No one knows better than JCB how to build a robust excavator. The 8029 CTS is the product
More information8.70 m. Loading and cleaning machine. Technical innovation
Class Leaders Loading and cleaning machine Technical innovation Effective cleaning Careful handling of beets Tremendous load-carrying capacity Very high user-safety The euro MAUS has been greatly improved
More informationB20S / B25S / B30S / B32S-5 BC20S / BC25S / BC25SE / BC30S-5 2,000kg to 3,200kg Capacity
R 4 Wheels Electric Forklift Trucks B20S / B25S / B30S / B32S-5 BC20S / BC25S / BC25SE / BC30S-5 2,000kg to 3,200kg Capacity B20S / B25S / B30S / B32S-5 2,000kg to 3,200kg Capacity Pneumatic Tire BC20S
More informationVolvo low emission directinjected,
A406X6 VOLVO ARTICULATED HAULER Engine output SAE J1349: Net 295 kw (395 hp) Gross 297 kw (398 hp) Body volume: 22 m3 (28.7 yd3) Load capacity: 36 t (40 sh tn) Volvo low emission directinjected, turbocharged,
More informationThe folding ROPS, available on the platform version, allows the operators to manoeuvre with ease when space is at a premium.
Available in the V (T3) series for vineyards and the F-N (T3) series for narrow orchards, this ultra-compact tractor range has been redesigned to offer improved gearbox controls, a new steering wheel with
More information