Surge-Trap Pluggable Type 2-40 ka
|
|
|
- Polly Webster
- 7 years ago
- Views:
Transcription
1 Surge-Trap Pluggable Type 2-40 ka IEC SPD DIN RAIL IEC TYPE 2 / CLASS II FEATURES & BENEFITS Maximum discharge current (8/20μs): 40kA per phase Nominal discharge current (8/20μs): 20kA per phase TNS, TNC, TT and IT networks Un(/L-L): 48V, 60V, 120/208V, 230/400V, 277/480V, 400/690V & higher DIN-rail mountable, plug-in format Visual and remote end of life indicators STP T2 40 is the series of Type 2/Class II devices for discharging voltage surges, in accordance with EN/IEC Suitable for the second stage of protection in supply distribution panels in which Type 1 protection devices are installed upstream, or for the first stage of protection in commercial or other applications not exposed to direct strikes and with no external lightning protection system. TECHNICAL DATA OVERVIEW Class Type 2 / Class II U n 48V, 60V, 120/208V, 230/400V, 277/480V, 400/690V Imax I n (8/20) 40 ka 20 ka Body Material PA66 CT1; V-0 System type Number of Poles 1,2,3,4 Format Temperature range I cc IP Code 20 Back-up fuse Stranded wire Section Rigid wire Section Response Time TT, TNS, TNC, IT Pluggable C 25 ka 125 A gg mm² mm² 25 ns Reversible chassis to allow cable entry from above or below Mechanically coded cartridges to avoid cartridge replacement errors Back-up fuse: 125 A gg APPLICATIONS Industry and automation Commercial and residential installations Telecom & IT & Data Centers LED outdoor lighting Water treatment Smart grid & LV Metering Photovoltaic & wind STANDARDS IEC EN EP.MERSEN.COM 1
2 1 Pole STPT2-40K275V-1PM Un Uc Imax (8/20) In (8/20) Up at In Remote (1Ph) STPT2-40K150V-1P VAC 150 V 40 ka 20 ka 0.9 kv No SP2-40K150V - STPT2-40K150V-1PM VAC 150 V 40 ka 20 ka 0.9 kv Yes SP2-40K150V - STPT2-40K275V-1P VAC 275 V 40 ka 20 ka 1.3 kv No SP2-40K275V - STPT2-40K275V-1PM VAC 275 V 40 ka 20 ka 1.3 kv Yes SP2-40K275V - STPT2-40K320V-1P VAC 320 V 40 ka 20 ka 1.4 kv No SP2-40K320V - STPT2-40K320V-1PM VAC 320 V 40 ka 20 ka 1.4 kv Yes SP2-40K320V - STPT2-40K440V-1P VAC 440 V 40 ka 20 ka 2 kv No SP2-40K440V - STPT2-40K440V-1PM VAC 440 V 40 ka 20 ka 2 kv Yes SP2-40K440V - STPT2-30K750V-1P VAC 750 V 30 ka 15 ka 3 kv No SP2-30K750V - STPT2-30K750V-1PM VAC 750 V 30 ka 15 ka 3 kv Yes SP2-30K750V - (N) STPT2-40K-N Neutral 265 V 40 ka 20 ka 1.5 kv No - SP2-40K-N EP.MERSEN.COM 2
3 2 Poles STPT2-40K275V- 2PM Un Uc Imax (8/20) In (8/20) Up at In Remote TT (1Ph+N) STPT2-40K150V-2PG VAC 150 V 40 ka 20 ka STPT2-40K150V-2PGM VAC 150 V 40 ka 20 ka STPT2-40K275V-2PG VAC 275 V 40 ka 20 ka STPT2-40K275V-2PGM VAC 275 V 40 ka 20 ka STPT2-40K320V-2PG VAC 320 V 40 ka 20 ka STPT2-40K320V-2PGM VAC 320 V 40 ka 20 ka 0.9 kv () 0.9 kv () 1.3 kv () 1.3 kv () 1.4 kv () 1.4 kv () No SP2-40K150V SP2-40K-N Yes SP2-40K150V SP2-40K-N No SP2-40K275V SP2-40K-N Yes SP2-40K275V SP2-40K-N No SP2-40K320V SP2-40K-N Yes SP2-40K320V SP2-40K-N TNS (1Ph+N) STPT2-40K60V-2P VAC 60 V 40 ka 20 ka 0.7 kv No SP2-40K60V - STPT2-40K60V-2PM VAC 60 V 40 ka 20 ka 0.7 kv Yes SP2-40K60V - STPT2-40K75V-2P VAC 75 V 40 ka 20 ka 0.8 kv No SP2-40K75V - STPT2-40K75V-2PM VAC 75 V 40 ka 20 ka 0.8 kv Yes SP2-40K75V - STPT2-40K150V-2P VAC 150 V 40 ka 20 ka 0.9 kv No SP2-40K150V - STPT2-40K150V-2PM VAC 150 V 40 ka 20 ka 0.9 kv Yes SP2-40K150V - STPT2-40K275V-2P VAC 275 V 40 ka 20 ka 1.3 kv No SP2-40K275V - STPT2-40K275V-2PM VAC 275 V 40 ka 20 ka 1.3 kv Yes SP2-40K275V - STPT2-40K320V-2P VAC 320 V 40 ka 20 ka 1.4 kv No SP2-40K320V - STPT2-40K320V-2PM VAC 320 V 40 ka 20 ka 1.4 kv Yes SP2-40K320V - IT (Ph+N) TNS (1Ph+N) STPT2-40K440V-2P STPT2-40K440V-2PM VAC (IT) 400 VAC (TNS) 230 VAC (IT) 400 VAC (TNS) 440 V 40 ka 20 ka 2 kv No SP2-40K440V V 40 ka 20 ka 2 kv Yes SP2-40K440V - EP.MERSEN.COM 3
4 STPT2-40K275V- 3 Poles 3PM Un Uc Imax (8/20) In (8/20) Up at In Remote TNC (3Ph) STPT2-40K150V-3P VAC 150 V 40 ka 20 ka 0.9 kv No SP2-40K150V STPT2-40K150V-3PM VAC 150 V 40 ka 20 ka 0.9 kv Yes SP2-40K150V STPT2-40K275V-3P VAC 275 V 40 ka 20 ka 1.3 kv No SP2-40K275V STPT2-40K275V-3PM VAC 275 V 40 ka 20 ka 1.3 kv Yes SP2-40K275V STPT2-40K320V-3P VAC 320 V 40 ka 20 ka 1.4 kv No SP2-40K320V STPT2-40K320V-3PM VAC 320 V 40 ka 20 ka 1.4 kv Yes SP2-40K320V STPT2-30K750V-3P VAC 1000 VAC 750 V 30 ka 15 ka 3 kv No SP2-30K750V STPT2-30K750V-3PM VAC 1000 VAC 750 V 30 ka 15 ka 3 kv Yes SP2-30K750V IT (3Ph) TNC (3Ph) STPT2-40K440V-3P STPT2-40K440V-3PM VAC (IT) 690 VAC (TNC) 400 VAC (IT) 690 VAC (TNC) 440 V 40 ka 20 ka 2 kv No SP2-40K440V 440 V 40 ka 20 ka 2 kv Yes SP2-40K440V EP.MERSEN.COM 4
5 4 Poles STPT2-40K275V- 4PM Un Uc Imax (8/20) In (8/20) Up at In Remote TT (3Ph+N) STPT2-40K150V-4PG /208 VAC 150 V 40 ka 20 ka STPT2-40K150V-4PGM /208 VAC 150 V 40 ka 20 ka STPT2-40K275V-4PG /400 VAC 275 V 40 ka 20 ka STPT2-40K275V-4PGM /400 VAC 275 V 40 ka 20 ka STPT2-40K320V-4PG /480 VAC 320 V 40 ka 20 ka STPT2-40K320V-4PGM /480 VAC 320 V 40 ka 20 ka 0.9 kv () 0.9 kv () 1.3 kv () 1.3 kv () 1.4 kv () 1.4 kv () No SP2-40K150V SP2-40K-N Yes SP2-40K150V SP2-40K-N No SP2-40K275V SP2-40K-N Yes SP2-40K275V SP2-40K-N No SP2-40K320V SP2-40K-N Yes SP2-40K320V SP2-40K-N TNS (3Ph+N) STPT2-40K150V-4P /208 VAC 150 V 40 ka 20 ka 0.9 kv No SP2-40K150V - STPT2-40K150V-4PM /208 VAC 150 V 40 ka 20 ka 0.9 kv Yes SP2-40K150V - STPT2-40K275V-4P /400 VAC 275 V 40 ka 20 ka 1.3 kv No SP2-40K275V - STPT2-40K275V-4PM /400 VAC 275 V 40 ka 20 ka 1.3 kv Yes SP2-40K275V - STPT2-40K320V-4P /480 VAC 320 V 40 ka 20 ka 1.4 kv No SP2-40K320V - STPT2-40K320V-4PM /480 VAC 320 V 40 ka 20 ka 1.4 kv Yes SP2-40K320V - IT (3Ph+N) TNS (3Ph+N) STPT2-40K440V-4P STPT2-40K440V-4PM /400 VAC (IT) 400/690 VAC (TNS) 230/400 VAC (IT) 400/690 VAC (TNS) 440 V 40 ka 20 ka 2 kv No SP2-40K440V V 40 ka 20 ka 2 kv Yes SP2-40K440V - EP.MERSEN.COM 5
6 Replacement cartridges SP2-40K275V Un Uc Imax (8/20) In (8/20) Up at In SP2-40K60V VAC 60 V 40 ka 20 ka 0.7 kv SP2-40K75V VAC 75 V 40 ka 20 ka 0.8 kv SP2-40K150V VAC 150 V 40 ka 20 ka 0.9 kv SP2-40K275V VAC 275 V 40 ka 20 ka 1.3 kv SP2-40K320V VAC 320 V 40 ka 20 ka 1.4 kv SP2-40K440V VAC 440 V 40 ka 20 ka 2 kv SP2-30K750V VAC 750 V 30 ka 20 ka 3 kv SP2-40K-N Neutral 265 V 40 ka 20 ka 1.5 kv ELECTRICAL DIAGRAMS (1Ph) (N) TT (1Ph+N) - 2PG TNS (1Ph+N) - 2P IT (1Ph+N) - 2P TNC (3Ph) - 3P IT (3Ph) - 3P TT (3Ph+N) - 4PG EP.MERSEN.COM 6
7 ELECTRICAL DIAGRAMS TNS (3Ph+N) - 4P DIMENSIONS 1 Pole 2 Poles 3 Poles 4 Poles EP.MERSEN.COM 7
SURGE PROTECTIVE DEVICES
SURGE PROTECTIVE DEVICES 1. INTRODUCTION In order to ensure safety of people, protection of equipment and, to a certain extent, continuity of supply, insulation co-ordination aims at reducing the likelihood
wietap wietap Overvoltage Protection Tensions running high
wietap wietap Overvoltage Protection Tensions running high 2 wietap wietap Overvoltage protection Important information on overvoltage The necessity of overvoltage protection on machines and systems as
Surge Protection for Photovoltaic Systems
Surge Protection for Photovoltaic Systems 2 photovoltaic generator disconnection boxes Index Introduction 4 Protection of PV systems 5 Surge Protection Range for PV system 6 Surge Protection Panels for
CATALOGUE SURGE PROTECTION LOW VOLTAGE
CATALOGUE SURGE PROTECTION LOW VOLTAGE SALTEK, s.r.o. (limited liability company), is a Czech company specialising in the development and manufacture of surge protection devices (SPD). SALTEK offer a wide
R.C.C.B. s two-pole LEXIC
87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...
The power of nature, the control of technology From ABB's experience, OVR PV: surge protection in photovoltaic plants
The power of nature, the control of technology From ABB's experience, OVR PV: surge protection in photovoltaic plants Made for the sun, threatened by atmospheric discharges The importance of surge protective
Renewable energy. Inverters - Socomec G-1. Load break switches (Isolators) - Socomec G-2. Fuses - df G-3. Fuse bases.
G Product page Inverters - Socomec G-1 Load break switches (Isolators) - Socomec G-2 Fuses - df G-3 Fuse bases Surge protection - df G-3 - Wohner G-5 - CPT G-4 - Dehn G-5 Connectors - Wieland G-6 Cable
Main catalog. System pro M compact Surge and lightning protection solutions with QuickSafe technology
Main catalog System pro M compact Surge and lightning protection solutions with QuickSafe technology System pro M compact Surge and lightning protection solutions with QuickSafe technology Presentation
A project to optimise quality and energy efficiency must include metering
EMDX 3 : Energy Metering A project to optimise quality and energy efficiency must include metering Metering upstream identifies the critical points and ensures optimum targeting of the actions to be taken,
ISL Insulation monitoring devices Continuous monitoring of IT systems from photovoltaic to industrial applications.
ISL Insulation monitoring devices Continuous monitoring of IT systems from photovoltaic to industrial applications. Ensuring operational continuity To ensure the operational continuity of an electrical
Class I surge protection with sparkover gaps
for low-voltage supplies surge protection with sparkover gaps Lightning conductors with sparkover gap for lightning protection or equipotential bonding providing class I According to the requirements of
Electrical safety and protection devices
Electrical safety and protection devices RCD PROTECTION The easy, economical way to safeguard yourself when working with electricity. RCDs are specifically designed to minimise the risk of a fatal electric
DECLARATION OF PERFORMANCE NO. HU-DOP_TN-212-25_001
NO. HU-DOP_TN-212-25_001 Product type 212 (TN) 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-35_001 Product type 212 (TN) 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-45_001 Product type 212 (TN)
White paper. ABB solutions for switching and protection of low speed wind turbines
White paper ABB solutions for switching and protection of low speed wind turbines ABB solutions for switching and protection of low speed wind turbines Index 1 Introduction...2 2 Full converter configuration...4
Brochure. Solar energy Lightning and surge protective devices
rochure Solar energy Lightning and surge protective devices s surge protection solution for solar energy has always been very active in creating products and solutions with low environmental impact and
Intersection Preassembled 19-inch Rack
Intersection Preassembled 19-inch Rack The intersection preassembled 19-inch rack comes fully assembled, wired and ready to be installed in a server rack. The rack provides communications, power conversion
DRM75A 230V 20/100A DIN rail single phase two wire energy meter
DRM75A 230V 20/100A DIN rail single phase two wire energy meter 1.1 Safety instruction 1.2 Foreword 1.3 Performance criteria 1.4 Specifications 1.5 Basic errors 1.6 Description 1.7 Dimensions 1.8 Installation
ADM1TE 5/30A DIN rail single phase two wire energy meter
ADMTE 5/30A DIN rail single phase two wire energy meter. Safety instruction.2 Foreword.3 Performance criteria.4 Specifications.5 Basic errors.6 Description.7 Dimensions.8 Installation.9 Operating.0 Troubleshooting.
Single-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window
Surge protection for emergency alarm systems
Surge protection for emergency alarm systems White Paper Contents Lightning and surge protection for a burglar alarm system with pulse polling technology Lightning and surge protection for a fire alarm
RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
Energy Management Energy Meter Type EM23 DIN
Energy Management Energy Meter Type EM23 DIN Class 1 (kwh) according to EN62053-21 Class B (kwh) according to EN50470-3 Class 2 (kvarh) according to EN62053-23 Accuracy ±0.5 RDG (current/voltage) Energy
ABB - Pôle Foudre Soulé & Hélita OVR PLUS N1 40
Presentation ABB - OVR PLUS N1 40 ABB France Lightning Protection Group All in one product SPDs with integrated back up protection are a solution that allow to have a complete surge protection design into
DC Combiner box and AC solutions. Leadership in circuit protection
DC Combiner box and AC solutions Leadership in circuit protection Eaton and Cooper united. Energizing a world that demands more. We deliver: Electrical solutions that use less energy, improve power reliability
User Manual V1.0 2014 SDM220MODBUS. Single-Phase Two Module DIN rail Meters
SDM220MODBUS Single-Phase Two Module DIN rail Meters Measures kwh, Kvarh, KW, Kvar, KVA, PF, Hz, dmd, V, A, etc. Di-directional measurement IMP & EXP Two pulse outputs RS485 Modbus Din rail mounting 36mm
Redline. Comfort functions. Surge Arresters. SurgeGuard. Functions. Applications. Standards. Features. Marking. plug-in
Surge rresters Surgeuard omfort functions unctions Protection of an electrical installation and all electrical and electronic devices connected to this installation against destructive surges. Such voltage
Recommended Tools and Supplies: Small Flat Blade Screwdriver, 35mm x 7.5mm DIN Rail. Qwik Install
TPDIN-Monitor-WEB Web Based Monitor and Control Remote Power Stations Backup Power Systems Solar Systems Wind Powered Systems Industrial Sense & Control Process Automation Congratulations! on your purchase
Photovoltaic System Overcurrent Protection
Photovoltaic System Overcurrent Protection Photovoltaic System Overcurrent Protection Introduction Solar Photovoltaic (PV) systems have, over the last fifty years, evolved into a mature, sustainable and
PHOENIX CONTACT - 01/2007
Uninterruptible power supply INTERFACE Data Sheet 103123_00_en PHOENIX CONTACT - 01/2007 Description Especially compact and easy-to-use, the new MINI-DC-UPS/ 24 DC/2 is a combination of the power supply
STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase
Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff
Features. Display. Measurements. Intelligent. Accuracy. Models. Installation DEIF A/S. Multi-instrument 4921210109D
7000/7000C/7020 Multi-instrument 4921210109D Features Measurements All 3-phase AC measurements True RMS Replaces analogue meters Demand on each phase current Accuracy U, I and F class 0.5 Other values
Surge Protection and Power Supply Units 2013 / 2014
Surge Protection and Power Supply Units 2013 / 2014 6 PCB connection technology and electronics housing PCB terminal blocks and plug-in connectors Electronics housing Connection technology for field devices
Fuses for Semiconductor Protection - Cylindrical Fuses. Class: Voltage ratings: Current ratings: Standards: Approvals: Features and Benefits
Fuses for Semiconductor Protection - Cylindrical Fuses SIBA cylindrical Ultra-Rapid fuses are available in six different sizes They can be ordered with an integral striker for blown fuse indication or
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
SANS 10142-1 : 2008 CODE OF PRACTICE THE WIRING OF PREMISES Part 1 : Low Voltage Installation
SANS 10142-1 : 2008 CODE OF PRACTICE THE WIRING OF PREMISES Part 1 : Low Voltage Installation 4 Compliance Proof of Compliance (Sub clause 4.1.1) The SABS safety mark The SABS approved performance mark
RISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features:
Application : RISH Master 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network & replaces the multiple analog
HARTING Ethernet Cabling 4-poles Overview
Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] HARTING PushPull Connectors [on page 22] System cables [on page 24] Panel feed-throughs [on
Stand Alone POTS Fiber Optic System. P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit. Description & Installation
Stand Alone POTS Fiber Optic System P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit Description & Installation Printed in USA 09/11 TO466 Rev. A Table of Contents Page 1.0 SCOPE 2 2.0 PRODUCT
Control Devices Catalogue. Control Devices. Preferred and Standard Products
Control Devices Catalogue Control Devices Preferred and Standard Products KOP.J Timer Electronic 22.5 mm Characteristics Mounting KOP.J 22.5 mm mono or multifunction high immunity to interference surface
15 Series - Electronic step relay and dimmer. Features 15.91 15.51 15.81 SERIE
Series - Electronic step relay and dimmer SERIE Features.91.51.81 Electronic step relay and dimmer for control of lighting levels Suitable for incandescent and halogen lighting loads (with or without transformer
Universal control module for motorized devices
Ref: MOD-0105-N The MOD-0105-N is a universal module for motorized devices, blinds, awnings, curtains, doors, etc.. Allows, with vivimat BUS, the local or remote control of a motorized devices, ensuring
EVlink Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility
EVlink Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility Catalog 2800CT1001 2014 Class 2800 CONTENTS Description............................................ Page 2 Outdoor
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
Relés e Contatores de Estado Sólido SIRIUS
Relés e Contatores de Estado Sólido SIRIUS Coletânea de dados técnicos ( product data sheet ) Agosto/212 SSR - 3RF21 22,5 mm Ponto Zero SSR - 3RF2 45 mm Ponto Zero SSR - 3RF22 45 mm Ponto Zero Trifásico
SWITCH! DESCRIPTION. ENVIRONMENTAL SPECIFICATIONS Operating Temperature: 0 C to +40 C SPECIFICATION SHEET:
SWITCH The Budderfly lighting switch is a Decora style, plug-and-play replacement for your existing building switches. Installing a Budderfly adapter transforms your building s existing wiring into the
DEHNshield Application-optimised multipole combined lightning current and surge arrester
DEHshield Application-optimised multipole Application-optimised prewired combined lightning current based on spark gap technology simply equipped electrical installations with reduced technical requirements
PCS0100en 02.2008. Persy Control Services B.V. Netherlands
P-Bus Gateway PBGW2.128 Universal gateway between the P-bus protocol and open standard protocols. The variety of available electrical interfaces on the gateway offers a wide range of possibilities for
ELEMKO reserves the right to modify, add or remove any information included in this catalogue, if necessary. Every updated version of the catalogue
' EEMKO reserves the right to modify add or remove any information included in this catalogue if necessary Every updated version of the catalogue automatically cancels all the previous ones Photographs
Redundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
How To Understand The Electrical Power Supply Of A Power Supply System
17 Circuit diagram symbols E 18 CIRCUIT DIAGRAM SYMBOLS electrical network elements three-phase line or cable single-phase line or cable short circuit earth electrode outgoing feeder supply incoming feeder
TECHNICAL DESCRIPTION OF THE DISTRIBUTION SUBSTATION REMOTE MONITORING SYSTEM
HELLENIC ELECTRICITY DISTRIBUTION NETWORK OPERATOR S.A. NOTICE OF CALL FOR TENDERS No ND-xxx PROJECT: Pilot Telemetering and Management System for the Electric Power Supply Demand by Residential and Small
Product and functional description
Product and functional description The KNX / DALI gateway N 141/02 is a 4 MU wide, DINrail mounted KNX device with one DALI interface to which up to 64 DALI actuators (e.g. DALI ballasts) can be connected
Features. Picture. Specifications
Type: for level measurement Order No.: see Table 1 / Page 4 Features Picture Two wire system Piezoresistive measuring element Output signal 4-20 ma Conformity error ±0.5 % FS or Standard DIN measuring
EVlink Electric Car Charging Stations Powering the Future of Sustainable Mobility
EVlink Electric Car Charging Stations Powering the Future of Sustainable Mobility Catalog 2800CT1001 R09/15 2015 Class 2800 CONTENTS Description............................................ Page 2 Home
3-phase, bidirectional energy meter
Data sheet www.sbc-support.com 3-phase, bidirectional energy meter with S0 pulse output Bidirectional energy meter with S0-interface. The S0 interface is a hardware interface for the transmission of measured
ABB solutions for photovoltaics Protection and other modular devices
ABB solutions for photovoltaics Protection and other modular devices 2 ABB Component supplier for residential and power plant application ABB has been working for many years, as both a manufacturer and
RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters
Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main
Electric Vehicle Charging Solutions
GE Energy Industrial Solutions Electric Vehicle Charging Solutions GE imagination at work The Electric Vehicle Picks up Speed Moving Power from the Grid to the Road Over the next five years, virtually
Polyphase kwh Electricity Meter
Polyphase kwh Electricity Meter Model Type: 5192B USER MANUAL Issue 1.0 E & O E AMPY Automation Ltd. July 2003 doc. ref. CSD 093 Contents 1 Introduction 2 1.1 Purpose 2 2 Definitions 2 2.1 References 2
Waveguide Access Point WGA631. Product Guide
Waveguide Access Point Product Guide Waveguide Access Point Contents 1. Description............................ 3 2. Application............................ 3 3. Technical data... 4 4. Physical interfaces......................
APC. DIN Rail Control Panel Mounting Uninterruptible Power Supply. Catalog
APC DIN Rail Control Panel Mounting Uninterruptible Power Supply Catalog 2014 Contents Introduction, description... 4 Specifications...5 References....6 Dimensions...7 Wiring diagrams....8 Product reference
Transient and Lightning Protection for the Water Industries
Transient and Lightning Protection for the Water Industries Mike Nager Phoenix Contact mnager@phoenixcon.com 5 th ISA Water/Wastewater Automatic Controls Division Symposium (WWAC) August 3-5, Orlando,
Energy Depot GmbH PRODUCT AND APPLICATION GUIDE. Total Monitoring Solution for PV. Delivering Solutions for Energy Management
Energy Depot GmbH Delivering Solutions for Energy Management PRODUCT AND APPLICATION GUIDE Total Monitoring Solution for PV SOLAR LOGGER & ANALYSIS DC STRING MONITORING Residential Comprehensive Solar
Surge Protection. Electrical Installations. Photovoltaic. Telecom. Data. Radiocommunication
9 th e d i t i o n Surge Protection Electrical Installations Photovoltaic Telecom Data Radiocommunication General atalog 9 th edition p. 6 DIN RAIL A POWER SURGE PROTETORS p. 60 P HOTOVOLTAI SURGE PROTETORS
TECHNICAL SPECIFICATIONS
1. Standards BOS Item / System I ii iii TECHNICAL SPECIFICATIONS Applicable BIS /Equivalent IEC Standards / Applicable MNRE Specifications Standard Description Standard Number Crystalline Silicon Terrestrial
HARTING mcon 3000 Introduction and features
Introduction and features HARTING mcon 3000 es, managed, for mounting onto top-hat mounting rail in control cabinets General Description Features The fully managed es of the product family HARTING mcon
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a
Power Meter Series 700
PowerLogic power-monitoring units Power Meter Series 700 Technical data sheet 2007 Functions and characteristics E90463 The PowerLogic Power Meter Series 700 offers all the measurement capabilities required
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
AMIS. Automated Metering and Information System. Integration of meters from other manufacturers
AMIS Automated Metering and Information System TD-3530/TACU30 Third-Party Device Gateway Integration of meters from other manufacturers Connection and integration of max. 3 meters from third party manufactureres
Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
3RT1015-1BB41 CONTACTOR, AC-3 3 KW/400 V,
Automation Technology > Industrial Controls > Switching Devices > Contactors and Contactor Assemblies > Power Contactors for Switching Motors > Contactors SIRIUS 3RT10, 3-pole, 3... 250 kw 3RT1015-1BB41
Thermistor motor protection relays CM-MSS.22 and CM-MSS.23
Data sheet Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 The thermistor motor protection relays CM-MSS.22 and CM-MSS.23 monitor the winding temperature of motors and protect them from overheating,
W DATA SHEET: RESIDUAL CURRENT CIRCUIT BREAKER 25-100A, SERIES BCF0 AND BCF6
W DATA SHEET: RESIDUAL CURRENT CIRCUIT BREAKER 25-100A, SERIES BCF0 AND BCF6 W SCHRACK-INFO Any mains connection If using 4-pole. switches with 3 or 2-poles, ensure connection acc. to assembly instructions
AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits
Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility
Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility Catalog 2800CT1001R02/13 2013 Class 2800 CONTENTS Description............................................ Page 2 Indoor Charging
Feed-through terminal block - SSK 110 KER-EX - 0502058
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101433D0201 28/03/11 NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits.
AC3200 INTELLIGENT BROADBAND AMPLIFIER
Kari Mäki 9.4.2013 1(7) AC3200 INTELLIGENT BROADBAND AMPLIFIER AC3200 is the latest leading-edge addition to AC family with extended frequency and gain ranges and integrated electrical controls in both
Installation and operating instructions
English Installation and operating instructions Energy meter 3-phase CETS-A via up to 1500A Description The CETS-A is a compact electronic active power energy meter for application in 3-phase power lines
Quick Connect. quick - simple - efficient. www.g-mw.de
Quick Connect quick - simple - efficient www.g-mw.de Phone: +49 9103 7129-0 Fax: +49 9103 7129-207 Innovative connection technology to plug three single-phase current transformers to multifunctional power
Manual Motor Starter MS 116 up to 16 A Technical Data
Manual Motor Starter MS 116 up to 16 A Technical Data Type MS 116 Standards: Major International IEC 60 947-4-1 / IEC 60 947-2 and European Standards EN 60 947-4-1 / EN 60 947-2 Approvals, Certificates
3-Phase Energy meter with serial S-Bus interface
Data sheet www.sbc-support.com 3-Phase Energy meter with serial S-Bus interface Energy meters with an integrated S-Bus interface allow direct reading of all relevant data, such as energy (Total and partial),
LevelOne IFE-0500 4-Port PoE + 1-Port TP Industrial Fast Ethernet Switch User Manual
LevelOne IFE-0500 4-Port PoE + 1-Port TP Industrial Fast Ethernet Switch User Manual Ver. 1.0.0-0711 1 FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital
LV MCC LOW VOLTAGE SWITCHGEAR MOTOR CONTROL CENTRE PRODUCT GUIDE
LV MCC LOW VOLTAGE SWITCHGEAR MOTOR CONTROL CENTRE PRODUCT GUIDE 380/415/690 Volt AC 50/65/80/100 ka 1. Product Guide Low Voltage Motor Control Centre CONTSTRUCTION Continuous "poured in place" gasket
Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1
Power Supply Unit, Primary Switched, Narrow Design MINI POWER provides: Extra narrow design with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide-range input
93.68/93.69. Time scale: from 0.1s to 6h Multi-function For use with 34.51 (EMR) and 34.81 (SSR) relays. Screw terminal and push-in terminal
Series - Timed socket for 34 series Features.68/.69 Slim timed sockets for 34 series, 6.2 mm wide Timer adjustment via top mounted rotary knob accessible after assembly Control signal terminal DIP-switch
/ The personal storage solution for 24H Sun. / Dynamic Peak Manager. / Smart Grid Ready THREE-PHASE
Perfect Welding Solar Energy Perfect Charging FRONIUS ENERGY PACKAGE The personal storage solution for 24H Sun. PC board replacement process SnapINverter technology Integrated data communication Dynamic
TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector
Product datasheet Characteristics TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus
HARAX circular connector
Show navigation HARAX circular connector Technical characteristics Specifications IEC 60 352-4 IEC 60 9475-2 Approvals HARAX M8-S/M12-S Rated voltage Rated current Diameter of individual strands Conductor
Low voltage Direct Current Network. Compact NSX DC PV. Circuit breakers and switch disconnectors for solar application.
Low voltage Direct Current Network Compact NSX DC PV Circuit breakers and switch disconnectors for solar application Catalogue 2012 Compact NSX DC PV A complete DC offer for solar application from 80
Dead Tank Circuit Breaker 72PM40-C Proven reliability through common platforms
Dead Tank Circuit Breaker 72PM40-C Proven reliability through common platforms ABB innovations for changing demands ABB (www.abb.com) is a leader in power and automation technologies that enables utility
5SV Residual Current Protective Devices
s Siemens AG 2013 SENTRON 5SV Residual Current Protective Devices New portfolio for reliable personnel, material and fire protection Safe protection against residual currents Residual current protective
ICON Server box installation manual Rev. 1.1
ICON Server box installation manual Rev. 1.1 Contents 1.0 About this manual... 3 2.0 Intended use... 3 2.1 European WEEE directive... 3 3.0 Installation and service instructions... 4 Server box overview...
PANEL CUT-OUT DIMENSIONS
POWER, Mains, IEC A comprehensive range of 3 pin IEC connectors with extensive international approval status designed for 'cold condition' applications (65 C). Rated 10A, 2Vac and to IEC320, EN60320 and
ABB PV + Storage REACT-3.6/4.6-TL 3.6 to 4.6 kw
Solar inverters ABB PV + Storage REACT-3.6/4.6-TL 3.6 to 4.6 kw PV energy, combined with energy storage systems, can help increase self-consumption and energy selfsufficiency*. One of the biggest challenges
How can a charging station for electric vehicles be set up simply and safely?
SB18 Building > Electromobility > Charging Station Design How can a charging station for electric vehicles be set up simply and safely? Requirement In order to supply electric vehicles with electric power,
48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according