Medium bore size cylinder Standard type with switch. CMA2 Series. Bore size: 20, 30, 40. Double acting cylinder single rod type

Size: px
Start display at page:

Download "Medium bore size cylinder Standard type with switch. CMA2 Series. Bore size: 20, 30, 40. Double acting cylinder single rod type"

Transcription

1 S*2 MK2 M2 SM SG S2 SS K2 /O2 SS M2 M SM2 MS* F* SK JS3 USS US L SG SS/L LS LG LM L LY SR2 U2 HM H SR 3 U R2 MF SH GL ning Specifications escriptions Bore size mm ctuation Working flui Max. working pressure Ma Min. working pressure Ma Withstaning pressure Ma mient temperature ort size Stroke tolerance mm Working piston spee mm/s ushion Lurication llowale energy asorption J Meium ore size cyliner Stanar type with switch M2 Series Bore size:,, JIS symol M Note: his prouct cannot asor large energy generate y external loa. We recommen to install an external uffer evice aitionally. Stroke length oule acting cyliner single ro type oule acting ompresse air to 0 (no freezing) Rc/ (up to 0), 0 (up to 000) 50 to 500 No Not require (when luricating, use turine oil lass ISO G32.) Note : ustom stroke length is availale per mm increment. Note 2: For single foot type (LS type), maximum stroke length is 50 mm. Note 3: For ellows "J" type, stroke length shoul e longer than 25 mm. onsult with K when stroke length is shorter than 25 mm. Note 4: If the maximum stroke is exceee, prouct specifications may not e satisfie epening on conitions. Refer to page 74 at the en of this manual Stanar stroke length (mm) Max. stroke length (mm) vailale stroke length (mm) Min. stroke length (mm) 25, 50, 75, , 0, Min. stroke length of type with switch Rough sketch escriptions Grommet ifferent surface installation erminal ox 5 (0) mm 5 (0) mm Note : When one switch is installe, refer to the value in ( ). Grommet mm Same surface installation erminal ox () (B) 32 mm (installation ) 80 mm (installation B) 94

2 M2 Series Specifications Switch specifications escriptions pplications Output metho ower voltage Loa voltage an current Light Leakage current escriptions pplications Loa voltage an current Light Leakage current Note : Refer to an ning page for other switch specifications. yliner weight R rogrammale controller, Relay, small solenoi valve 85 to 25 5 to 00 m L (ON lighting) m or less with 00 2 m or less with 0 roximity 2-wire escriptions/mounting style rouct weight when stroke length (S) = 0 mm Basic type (00) xial foot type (LB) Flange type (F) levis type () runnion type (/B) { When S = 0 mm, prouct weight is 0.4 kg itional weight at S = 50 mm is aitional weight at S = 0 mm 0.04 X (.g.) rouct weight of M2-F--50-RO- Weight of two switches is 0.08 kg rouct weight is 0.4 kg kg kg = 0.79 kg R2 R2Y (2-color inicator type) rogrammale controller eicate 0 to 5 to m Re/green L (ON lighting) rogrammale controller, relay, I circuit, solenoi valve 0 m or less 50 m or less L (ON lighting) NN output 4.5 to 28 or less m or less.2 m or less 0 or less Ree 2-wire R3 roximity 3-wire Switch weight Grommet erminal ox rouct stroke length (50) 0 R3Y (2-color inicator type) Re/green L (ON lighting) R0 R4 R5 R Relay, programmale High capacity relay, rogrammale controller, relay, rogrammale controller controller solenoi valve I circuit (w/o light), serial connection eicate (with self hol) 2/24, 5 to 50 m 0, to 0 m 5/2/24, 50 m or less 0, 7 to m 0, m or less 2, 7 to 0 m 2, 0 to 0 m 2, 0 m or less 24, 5 to 50 m L ON lighting 0 m Neon light OFF lighting m or less None 0 m L ON lighting 0. m or less (Unit: kg) per S = 0 mm = 0.07 kg S*2 MK2 M2 SM SG S2 SS K2 /O2 SS M2 M SM2 MS* F* SK JS3 USS US L SG SS/L LS LG LM L LY SR2 U2 HM H SR 3 U R2 MF SH GL ning Meium ore size cyliner Stanar type 95

3 M2 Series S*2 MK2 M2 SM SG S2 SS K2 /O2 SS M2 M SM2 MS* F* SK JS3 USS US L SG SS/L LS LG LM L LY SR2 U2 HM H SR 3 U R2 MF SH GL ning How to orer Without switch M2 F 50 I With switch M2 F 50 R0 R Mounting style Note <xample of moel numer> M2-F--50-R0-R-I B Bore size Note on moel no. selection Stroke length Note : he maximum stroke of the single-en foot type (LS type) is 50 mm. Note 2: Refer to page 94 for min. stroke length with switch. Note 3: For ellows "J" type, stroke length shoul e longer than 25 mm. onsult with K when stroke length is shorter than 25 mm. Note 4: With the type, the port alignment is ajuste with spacers so stroke irection imensions (X, LL, X imensions) have a tolerance of 0 to.5 mm. Note 5: Instantaneous maximum temperature is the temperature when spark an spatter etc. instantaneously contacts to ellows. Note : When using the same port position type (), the port alignment is ajuste with spacers, so X, LL, an X imensions have a tolerance of 0 to.5 mm. Note 7: "I" "Y" can not e selecte at the same time. Switch moel no. Moel: Meium ore size cyliner, oule acting, stanar type Mounting style : Ro sie flange type B Bore size : mm Stroke length : 50 mm Switch moel no. : Ree R0 switch, lea wire m Switch quantity : One on ro en F Option : Same port position G ccessory : Ro eye I Switch quantity F Option Note 3, Note 4, Note 5, Note G ccessory Note 7 escriptions Mounting style 00 Basic type LB xial foot type (oth sies) LS xial foot type (single) F Ro sie flange type FB Hea sie flange type ye racket type B levis racket type (pin an washer attache) Ro sie trunnion type B Hea sie trunnion type B Stroke length (mm) ue Stroke length vailale ustom Inner iameter Note 2 Stroke length Stroke length Switch moel no. Grommet erminal ox type ype Stanar type R* RB R2* R2B R2Y* R2YB R3* R3B R3Y* R3YB R0* R0B R4* R4B R5* R5B R* RB * Lea wire length Blank 3 5 Switch quantity R One on ro en H One on hea en wo hree F Option J L M to 700 to 700 to 700 m (stanar) 3 m (option) 5 m (option) Bellows Bellows Splash-proof R R2 R2Y R3 R3Y R0 R4 R5 R ontact roximity Ree Lea Inicator wire color inicator type 2-wire 2 color inicator type color inicator type 3-wire 2 color inicator type color inicator type 2-wire Without inicator light color inicator type Max. amient 00 By mm increment Max. instanteneous iston ro material (stainless steel) Same port position opper an F free G ccessory I Ro eye Y Ro clevis (pin an washer attache) B2 levis racket (pin an snap ring attache) 9

4 How to orer switch Switch oy + mounting racket M2 R0 Only terminal ox For R* B SW RB For R* SW R How to orer mounting racket Mounting racket xial foot type (LB/LS) Flange type (F/FB) ye racket type () levis racket type (B) runnion type (/B) Switch moel no. (Item on previous page) M-LB- M-F- M-- M-B- M-- Switch moel no. (Item on previous page) Note : he aove mounting racket moel no. inclues nut, toothe washer an parallel pin etc. Note 2: wo sets of "M-LB-*" in the aove tale are require for the axial irection foot (oule-sie). SW Bore size (Item B on previous page) Only switch oy R0 M-LB- M-F- M-- M-B- M-- Mounting racket M2 R M2 Series How to orer Bore size (Item B on previous page) Bracket M-LB- M-F- M-- M-B- M-- S*2 MK2 M2 SM SG S2 SS K2 /O2 SS M2 M SM2 MS* F* SK JS3 USS US L SG SS/L LS LG LM L LY SR2 U2 HM H SR 3 U R2 MF SH GL ning Meium ore size cyliner Stanar type 97

5 imensions R type asic type with switch (00) + (with ellows) R type switch terminal ox asic type (00) + (with ellows) H H 29, H With across Note : ort nipple is attache to ro cover for. Note 2: For imensions, roun up ecimal point or less. Note 3: Refer to page 22 for imensions of accessories. Basic type (00) asic imensions B H H LL MN MO M8 x M8 x M0 x M2 x M2 x.5 74 M2 x.5 2 With switch With ellows H I R (stroke length/3) (stroke length/3.25) (stroke length/3.25) + 7 H, With across 5 5 XF XF MO 5 R 8 2-Rc/8 5 R 8 2-Rc/8 MN (2 with) R R R: Ro sie max. sensitive position H: Hea sie max. sensitive position 5 7 M2 Series oule acting with switch 4 24 H H 45 X X H H XF S*2 MK2 M2 SM SG S2 SS K2 /O2 SS M2 M SM2 MS* F* SK JS3 USS US L SG SS/L LS LG LM L LY SR2 U2 HM H SR 3 U R2 MF SH GL ning Meium ore size cyliner Stanar type

6 M2 Series S*2 MK2 M2 SM SG S2 SS K2 /O2 SS M2 M SM2 MS* F* SK JS3 USS US L SG SS/L LS LG LM L LY SR2 U2 HM H SR 3 U R2 MF SH GL ning 0 imensions xial foot type (LB) Single axial foot type (LS) + (with ellows) + (with ellows) Note : Refer to asic type (00) aout imensions of ro with across flat. Note 2: ort nipple is attache to ro cover for. Note 3: For imensions, roun up ecimal point or less. Note 4: Refer to page 22 for imensions of accessories. xial foot type LB asic imensions Installation imensions B H LL L LB L L LG LH LI LR LS L M8 x M0 x M2 x With switch With ellows H R (stroke length/3) (stroke length/3.25) (stroke length/3.25) + 7 Single axial foot type (LS) asic imensions B M8 x M0 x.25 M2 x M8 x.5 M2 x.5 M2 x With switch With ellows LH LI LR LS L H R H 5 R 8 2-Rc/8 LR With across LB L L LB LS 4- L LG + stroke length LR LS L LI LH H L 2- L LI LH With across LF Note : Up to 50 mm stroke. Note 2: Refer to asic type (00) aout imensions of ro with across flat. Note 3: ort nipple is attache to ro cover for. Note 4: For imensions, roun up ecimal point or less. Note 5: Refer to page 22 for imensions of accessories. H LL X LB L L LF LG 4 L + stroke length 5 R 8 2-Rc/8 L LB Installation imensions (stroke length/3) + (stroke length/3.25) + 7 (stroke length/3.25) LG + stroke length 7 7 H H

7 imensions Ro sie flange type (F) Hea sie flange type (FB) + (with ellows) + (with ellows) F 4- F M2 Series oule acting with switch Note : Refer to asic type (00) aout imensions of ro with across flat. Note 2: ort nipple is attache to ro cover for. Note 3: For imensions, roun up ecimal point or less. Note 4: Refer to page 22 for imensions of accessories. Ro sie flange type (F) asic imensions Installation imensions B H LL X F F FF FG FH M8 x M8 x M0 x M2 x M2 x.5 74 M2 x With switch With ellows FL FM F F H R (stroke length/3) (stroke length/3.25) (stroke length/3.25) + 7 With across FL FM H F FH 5 R 8 2-Rc/8 With across FJ + stroke length Note : Refer to asic type (00) aout imensions of ro with across flat. Note 2: ort nipple is attache to ro cover for. Note 3: For imensions, roun up ecimal point or less. Note 4: Refer to page 22 for imensions of accessories. Hea sie flange type (FB) asic imensions Installation imensions B H LL X F F FH FJ FL M8 x M8 x M0 x M2 x M2 x.5 74 M2 x With switch With ellows FM F F H R (stroke length/3) (stroke length/3.25) (stroke length/3.25) + 7 F FF 5 R 8 2-Rc/8 H F FH FG + stroke length F 4- F F FL FM H H S*2 MK2 M2 SM SG S2 SS K2 /O2 SS M2 M SM2 MS* F* SK JS3 USS US L SG SS/L LS LG LM L LY SR2 U2 HM H SR 3 U R2 MF SH GL ning Meium ore size cyliner Stanar type

8 M2 Series S*2 MK2 M2 SM SG S2 SS K2 /O2 SS M2 M SM2 MS* F* SK JS3 USS US L SG SS/L LS LG LM L LY SR2 U2 HM H SR 3 U R2 MF SH GL ning 2 imensions Ro sie trunnion type () Note : Refer to asic type (00) aout imensions of ro with across flat. Note 2: ort nipple is attache to ro cover for. Note 3: For imensions, roun up ecimal point or less. Note 4: Refer to page 22 for imensions of accessories. Ro sie trunnion type () asic imensions Installation imensions B H LL X B F G M8 x.0 M8 x M0 x M2 x M2 x.5 74 M2 x With switch With ellows H L M N H R (stroke length/3) (stroke length/3.25) (stroke length/3.25) + 7 Ro sie trunnion type () with racket (option symol B2) + (with ellows) + (with ellows) M N N M R S L H H With across L H H 0 0 With across 7.5 F 5 R B 8 2-Rc/8 Note : Refer to asic type (00) aout imensions of ro with across flat. Note 2: ort nipple is attache to ro cover for. Note 3: For imensions, roun up ecimal point or less. Note 4: Refer to page 22 for imensions of accessories. Ro sie trunnion type () with racket (option symol B2) asic imensions Installation imensions B H K LL X B F G H M8 x.0 M8 x M0 x M2 x M2 x.5 74 M2 x With switch With ellows L M N R S X H R (stroke length/3) (stroke length/3.25) (stroke length/3.25) + 7 B F X 5 R 8 2-Rc/8 3.2 G + stroke length 4-oval hole 7 x G H H K

9 imensions M2 Series oule acting with switch S*2 Hea sie trunnion type (B) MK2 M2 SM SG S2 SS R H 5 B + K2 8 2-Rc/8 /O2 SS M2 M SM2 With across L M MS* (with ellows) J + stroke length K N F* SK Note : Refer to asic type (00) aout imensions of ro with across flat. Note 2: ort nipple is attache to ro cover for. Note 3: For imensions, roun up ecimal point or less. JS3 Note 4: Refer to page 22 for imensions of accessories. USS Hea sie trunnion type (B) asic imensions Installation imensions US B H LL X B H J M8 x.0 M8 x L M0 x M2 x SG M2 x.5 74 M2 x SS/L With switch With ellows LS K L M N H R LG (stroke length/3) + (stroke length/3.25) + 7 (stroke length/3.25) + 7 LM L LY Hea sie trunnion type (B) with racket (option symol B2) SR2 U2 HM H + 5 R H B N 2-Rc/8 L M 8 SR With across J + stroke length 3 (with ellows) U 4-oval hole 7 x 0 0 R R S MF SH GL Note : Refer to asic type (00) aout imensions of ro with across flat. Note 2: ort nipple is attache to ro cover for. ning Note 3: For imensions, roun up ecimal point or less. Note 4: Refer to page 22 for imensions of accessories. Hea sie trunnion type (B) with racket (option symol B2) asic imensions Installation imensions B H LL X B H J L M M8 x.0 M8 x M0 x M2 x M2 x.5 74 M2 x With switch With ellows N R S H R (stroke length/3) (stroke length/3.25) (stroke length/3.25) + 7 H H H H Meium ore size cyliner Stanar type 3

10 M2 Series S*2 MK2 M2 SM SG S2 SS K2 /O2 SS M2 M SM2 MS* F* SK JS3 USS US L SG SS/L LS LG LM L LY SR2 U2 HM H SR 3 U R2 MF SH GL ning 4 imensions ye racket type () Note : Refer to asic type (00) aout imensions of ro with across flat. Note 2: ort nipple is attache to ro cover for. Note 3: For imensions, roun up ecimal point or less. Note 4: Refer to page 22 for imensions of accessories. ye racket type () asic imensions Installation imensions B F LL B J L M8 x.0 M8 x M0 x M2 x M2 x.5 74 M2 x With switch With ellows M N O Q H R (stroke length/3) (stroke length/3.25) (stroke length/3.25) + 7 ye racket type () with racket (option symol B2) + (with ellows) + (with ellows) With across With across 5 R 8 2-Rc/8 5 R 8 2-Rc/8 + stroke length J + stroke length + stroke length J + stroke length Note : Refer to asic type (00) aout imensions of ro with across flat. Note 2: ort nipple is attache to ro cover for. Note 3: For imensions, roun up ecimal point or less. Note 4: Refer to page 22 for imensions of accessories. ye racket type () with racket (option symol B2) asic imensions Installation imensions B F LL J L M N O Q M8 x.0 M8 x M0 x M2 x M2 x.5 74 M2 x With switch With ellows R S H R (stroke length/3) (stroke length/3.25) (stroke length/3.25) + 7 H H L N L N B M M 4-oval hole 7 x H0 3.2 F O R S 0-0. Q -0.2 O 0 Q -0.2 F

11 imensions levis racket type (B) + (with ellows) Note : Refer to asic type (00) aout imensions of ro with across flat. Note 2: ort nipple is attache to ro cover for. Note 3: For imensions, roun up ecimal point or less. Note 4: Refer to page 22 for imensions of accessories. levis racket type (B) asic imensions. Installation imensions B LL B H J L M8 x.0 M8 x M0 x M2 x M2 x.5 74 M2 x With switch With ellows M N O W H R (stroke length/3) (stroke length/3.25) (stroke length/3.25) + 7 Same port position type () + (with ellows) With across H H 29 5 R 8 2-Rc/8, H + stroke length J + stroke length With across With across H M2 Series oule acting with switch Note : ort nipple is attache to ro cover for. Note 4: he port alignment is ajuste with spacers, so X, LL, Note 2: Refer to asic type (00) aout imensions of ro with across flat. an X imensions have a tolerance of 0 to.5 mm. R: Ro sie max. sensitive position Note 3: For imensions, roun up ecimal point or less. Note 5: Refer to page 22 for imensions of accessories. H: Hea sie max. sensitive position Basic type (00) asic imensions B H H LL Note 4 X Note 4 X Note 4 XF M8 x.0 7 to 77.5 M8 x to to M0 x to 83.5 M2 x to to M2 x.5 84 to 85.5 M2 x to to With switch With ellows H R (stroke length/3) (stroke length/3.25) (stroke length/3.25) + 7 XF XF H L N 5 R 8 2-Rc/8 B M H0 5 R 8 2-Rc/8 H 8 H W +0. O H 5 S*2 MK2 M2 SM SG S2 SS K2 /O2 SS M2 M SM2 MS* F* SK JS3 USS US L SG SS/L LS LG LM L LY SR2 U2 HM H SR 3 U R2 MF SH GL ning Meium ore size cyliner Stanar type

12 M2 Series S*2 MK2 M2 SM SG S2 SS K2 /O2 SS M2 M SM2 MS* F* SK JS3 USS US L SG SS/L LS LG LM L LY SR2 U2 HM H SR 3 U R2 MF SH GL ning Internal structure an parts list M , No. arts name Material Remarks No. arts name Ro nut Steel 2 iston B 2 iston ro, stainless steel Inustrial-use chrome plating 3 Spring washer caron steel 4 Hexagon nut 3 Ro packing seal Nitrile ruer 5 Hea cover 4 Bush ry earing Note Nut 5 Ro cover Steel 7 he toothe washer yliner gasket Nitrile ruer 8 ort nipple 7 yliner tue luminum alloy Har alumite With switch 8 iston luminum alloy 9 Switch oy 9 iston packing seal Nitrile ruer Ban 0 Magnet lastic 2 an hea machine screw Wear ring olyacetal resin Bracket Note : Oil impregnate resin earing is use for copper an F free specifications. Note 2: For copper an F free specifications, port nipple material of rass is nickel plate. Repair parts list Kit No. M2-K M2-K M2-K Repair parts numer 3 9 Material luminum alloy Steel Steel Steel Steel Steel Brass Stainless steel Steel Stainless steel Remarks Note 2 Mounting racket material Mounting style Material Note: Mounting racket is attache to the prouct when shippe. LB/LS F/FB /B /B S S S50 SS0 98

Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8

Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8 * U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned

More information

TIEROD CYLINDER. Ecological cylinder with compact switch SCG SERIES. Variations added CC-780A 4

TIEROD CYLINDER. Ecological cylinder with compact switch SCG SERIES. Variations added CC-780A 4 IEROD YLIDER S SERIES Ecological cylinder with compact switch Variations added 7 ew ecofriendly cylinder onventional switch ompact switch ew easytouse S Series (ø to ø) air cylinders Remove toxic substances

More information

Products no longer available

Products no longer available Technical ata sheet R6..R haracterize control valves, 2-way, with flange PN 6 for open an close col an warm water systems for moulating control on the water sie of air-hanling an heating systems air bubble-tight

More information

your reliable partner EAS -Compact Backlash-free Torque Limiting Clutches K.490.V14.EN

your reliable partner EAS -Compact Backlash-free Torque Limiting Clutches K.490.V14.EN ES -Compact Backlash-free Torque Limiting Clutches K.490.V4.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one

More information

Super G3 FAX Board-AE1 PARTS CATALOG SEPTEMBER 12, 2009 REV. 0. CANON Super G3 FAX Board-AE1 REV. 0 PRINTED IN U.S.A.

Super G3 FAX Board-AE1 PARTS CATALOG SEPTEMBER 12, 2009 REV. 0. CANON Super G3 FAX Board-AE1 REV. 0 PRINTED IN U.S.A. Super G FAX Boar-AE1 PARTS CATAOG SEPTEMBER 12, 2009 REV. 0 COPYRIGHT 2009 CANON INC. CANON Super G FAX Boar-AE1 REV. 0 PRINTED IN U.S.A. PREFACE This Parts Catalog contains listings of parts use Diagrams

More information

3 Port Solenoid Valve

3 Port Solenoid Valve ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.

More information

iglidur PRT Slewing Ring Bearing

iglidur PRT Slewing Ring Bearing igliur igliur Slewing Ring Bearing Stanar range Completely maintenance-free Easy installation, intercangeable sliing pas ig wear resistance For ig loa capacity, ig stiffness Available as stainless steel

More information

QLM and QLD Series Three-port Control Valves

QLM and QLD Series Three-port Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Guide rail bracket (for adjustable heads)

Guide rail bracket (for adjustable heads) (for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,

More information

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports

More information

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,

More information

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431) Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,

More information

BLS 100 Orifice Plate DIN 19206

BLS 100 Orifice Plate DIN 19206 E91 2006 1Orifice Plate, Orifice Flange, Meterrun, Restriction Orifice Application Flow rate measurement of aggressive an nonaggressive meia particularly for large pipelines. Construction Orifice plate

More information

Rack & Pinion Lubrication Systems

Rack & Pinion Lubrication Systems Page Lubricator 125 cm 3 ZE-2 Lubricator 475 cm 3 ZE-3 Selection of the Lubrication for Rack Drives ZE-4 Lubrication System ZE-5 6 Felt Gear ZE-7 8 Lubrication Equipment, Accessories ZE 9 Lubricating Systems

More information

Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62

Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,

More information

KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting

KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56

More information

Illustrated Parts List

Illustrated Parts List Spicer Tandem Axles Illustrated Parts List AXIP0085a January 1994 Single Reduction, Dual Range, & Double Reduction Addendum 461, 462, 463, 521, 581 46,000-65,000 lbs Introduction Single Reduction w/wheel

More information

Now Available in Black Zinc Nickel

Now Available in Black Zinc Nickel 847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances

More information

Process Valve. 2 Port Valve For Compressed Air and Air-hydro Circuit Control

Process Valve. 2 Port Valve For Compressed Air and Air-hydro Circuit Control Process Valve Series VN Port Valve For Compressed ir and ir-hydro Circuit Control Exclusively for air pressure system and air-hydro circuit control Universal Port Valve [Option] Cylinder actuation by external

More information

VG2000 Series Cast Iron Flanged Globe Valves

VG2000 Series Cast Iron Flanged Globe Valves VG2000 Series ast Iron Flanged Globe Valves Installation Instructions Part No. 14-1161-106, Rev. Issued November 15, 2013 Supersedes June 15, 2007 pplications VG2000 Series ast Iron Flanged Globe Valves

More information

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines 40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3

More information

3/2-way Mini Solenoid Valve

3/2-way Mini Solenoid Valve 3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug

More information

Directional Control Valves

Directional Control Valves echnical Information General he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available in 2 or 3-position

More information

3/2-way Solenoid Valve, direct-acting, NC or NO

3/2-way Solenoid Valve, direct-acting, NC or NO 3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined

More information

Air Cylinder. Series NCA1 NFPA Interchangeable

Air Cylinder. Series NCA1 NFPA Interchangeable N4- ir ylinder Series N N Interchangeable Medium uty.5 to 4 ore ifferent N Mounting Options Non-otating Option Tandem ylinder Option uto Switch apable ir ylinder N Interchangable Series N Improved cushion

More information

Piston rod cylinder Tie rod cylinder Series 167. Brochure

Piston rod cylinder Tie rod cylinder Series 167. Brochure Brochure 2 Tie rod cylinder ISO 6431, Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 5 Tie rod cylinder ISO 6431, -53 double-acting

More information

3. Geberit Pluvia Roof Drainage Systems

3. Geberit Pluvia Roof Drainage Systems 3. Geberit Pluvia Roof Drainage Systems Assortment overview: Pluvia Outlets...52 3.1 Roof outlets... 53 3.1.1 Roof outlets up to 25 l/s...53 3.1.2 Roof outlets up to 100 l/s...55 3.2 Roof outlets for gutters...

More information

RoHS. Shock / vibration resistant. Magnetic field proof. Many variants

RoHS. Shock / vibration resistant. Magnetic field proof. Many variants Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.

More information

K&T Saw Shop 606-678-9623 or 606-561-4983. 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories

K&T Saw Shop 606-678-9623 or 606-561-4983. 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 2 of 11 Accessories 68899 Piston Assy - 0.005 in. oversize 66790 Ring Set - Piston 0.005

More information

MDT5N25 & MTD5N40 SERVICE PARTS

MDT5N25 & MTD5N40 SERVICE PARTS MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts

More information

RA 23 178/08.99. Functional description 1/10. 4/3-, 4/2- and 3/2 Directional Control Valves Model WE 6.. /E, Series 6X with wet pin AC or DC solenoids

RA 23 178/08.99. Functional description 1/10. 4/3-, 4/2- and 3/2 Directional Control Valves Model WE 6.. /E, Series 6X with wet pin AC or DC solenoids 4/3-, 4/- and 3/ Directional Control Valves Model WE 6.. /E, Series 6X with wet pin C or DC solenoids Size 6 (D 03) up to 5100 SI (350 ar) up to 1 GM (80 L/min) R 3 178/06.98 R 3 178/08.99 Replaces: 06.98

More information

RM/55401/M, Roundline cylinder Magnetic piston, double acting

RM/55401/M, Roundline cylinder Magnetic piston, double acting RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed

More information

Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.

Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00. Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the

More information

Cylinders DIN ISO 6431 and VDMA 24 562

Cylinders DIN ISO 6431 and VDMA 24 562 Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets

More information

Pneumatic actuators The Original! Technics of the top class.

Pneumatic actuators The Original! Technics of the top class. Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page

More information

Dual Pressure Controls for Refrigeration, Air-conditioning and Heatpump Applications

Dual Pressure Controls for Refrigeration, Air-conditioning and Heatpump Applications Series P78 ual Pressure Controls for Refrigeration, Air-conditioning and Heatpump Applications Product Bulletin These dual pressure controls are designed for use in a variety of applications involving

More information

Air Cylinder. ø20, ø25, ø32, ø40. Rubber. Air. Rubber. Air. Rubber. Rubber. Air. Rubber Air. Rubber. Rubber. Air. Rubber

Air Cylinder. ø20, ø25, ø32, ø40. Rubber. Air. Rubber. Air. Rubber. Rubber. Air. Rubber Air. Rubber. Rubber. Air. Rubber ir Cylinder Series ø, ø, ø, ø Series Variations Standard Series Standard variations ore Series ction Rod Cushion asic size uilt-in With Clean Copper/ age One-touch fitting ir-hydro rod boot series luorine-free

More information

125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN

125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN SPARE PARTS MANUAL: CHASSIS ART.NO.: 3CF8003K4EN ENGLISH INDEX FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS FRAME SIDE / CENTER STAND 3x 4x 5x 6x SHOCK ABSORBER SWING ARM EXHAUST SYSTEM AIR FILTER 7x

More information

Tyco PremiAir Pneumatic Actuators

Tyco PremiAir Pneumatic Actuators A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either

More information

CYLINDER SERIES ISO 15552 (EX ISO 6431), Ø 32-63 mm TWO-FLAT

CYLINDER SERIES ISO 15552 (EX ISO 6431), Ø 32-63 mm TWO-FLAT YIR SRIS ISO 2 (X ISO 3), - mm TWO-T This version of cylinder is used to keep the parts fixed to the piston rod at an angle and to apply torques within the specified limits. The piston rod of the Two lat

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

RM/8000/M, ISO cylinder Magnetic piston, double acting

RM/8000/M, ISO cylinder Magnetic piston, double acting > > Ø 0... 5 mm > > Magnetic piston as standard > > Conforming to ISO 6 > > Corrosion resistant- With buffer or adjustable cushioning > > Nose mounting nut and piston rod supplied locknut as standard Technical

More information

T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com

T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition

More information

GROENEVELD AUTOMATIC GREASING SYSTEMS

GROENEVELD AUTOMATIC GREASING SYSTEMS GROENEVELD AUTOMATIC GREASING SYSTEMS TWIN Parts & Accessories Book Pumps, Fittings, Injectors, Lining, etc. www.groeneveld-group.com 1 TWIN ELECTRICAL Item Part # Description 1 F113966 Switch 24V 2 F122991

More information

PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS

PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS AC AND DC GENERATOR SCHEMATIC ENGINE GENERATOR ASSEMBLY REF Description QTY PSS10 PSS12 1 Engine, Honda GX620K1VXC2 Code 637220 1 99779-000 GX670VXC2 Code 637220

More information

Lead Screws with Plastic Nuts. Resin Lead Screws. Combination of Shaft nominal dia. & Lead

Lead Screws with Plastic Nuts. Resin Lead Screws. Combination of Shaft nominal dia. & Lead Screws with Plastic Nuts SUS3SUS33 MRH MRH eatures he Shaft is manufacture from SUS3 or SUS33, which gives excellent corrosion resistance. Wie range of combination of Shaft ia. an are available. MRH incorporates

More information

API Flanged Safety Relief Valves Series 526 CATALOG

API Flanged Safety Relief Valves Series 526 CATALOG API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes

More information

Standard Bills of Materials Commonly Ordered Models Only

Standard Bills of Materials Commonly Ordered Models Only Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter

More information

2S-Series Sub-Miniature Toggle Switches

2S-Series Sub-Miniature Toggle Switches Carling Technologies S-Series Sub-Miniature Toggle Switch SS-Series Sealed Sub-Miniature Toggle Switch SM-Series Sealed Surface Mount Sub-Miniature Toggle Switch S-Series Ordering Scheme Specifications

More information

Oil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data

Oil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data amping Engineering Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps, lids, lever arms. They are fixed at

More information

MACHINE SCREW ACTUATORS 2 to 100 Tons

MACHINE SCREW ACTUATORS 2 to 100 Tons 2 to 100 Tons Top Plate 316 S.S. Must be bolted to lifting member to prevent rotation except when screw is keyed. Lifting Screw 316 S.S. Also available as threaded end or clevis end. Shell Cap 316 S.S.

More information

Piston rod cylinders Standard cylinders ISO 15552, series PRA. Brochure

Piston rod cylinders Standard cylinders ISO 15552, series PRA. Brochure ISO 15552, series PRA Brochure 2 ISO 15552, series PRA Profile cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston Cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional

More information

Geberit Pluvia. Syphonic roof drainage system. Overview Page 42. Geberit Pluvia outlets 6 l. Geberit Pluvia outlets 14 l

Geberit Pluvia. Syphonic roof drainage system. Overview Page 42. Geberit Pluvia outlets 6 l. Geberit Pluvia outlets 14 l Geberit Pluvia Syphonic roof rainage system Description Overview Page 42 Geberit Pluvia outlets 6 l Outlets Page 43 Contact foil Page 43 Outlets Page 44 Geberit Pluvia outlets 14 l eating element Page

More information

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier

More information

AIR-AIR PRESSURE MULTIPLIER (BOOSTER)

AIR-AIR PRESSURE MULTIPLIER (BOOSTER) AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally

More information

Piston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure

Piston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure ISO 15552, series TRB Brochure 2 ISO 15552, series TRB Tie rod cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional

More information

Valve systems Base plates, according to standard ISO 5599-1. Brochure

Valve systems Base plates, according to standard ISO 5599-1. Brochure ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure

More information

Operating Instructions Parts List Manual Scissor Lift Pallet Truck

Operating Instructions Parts List Manual Scissor Lift Pallet Truck Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors

More information

10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring

10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

ISO/VDMA Actuators. Engineering GREAT Solutions

ISO/VDMA Actuators. Engineering GREAT Solutions ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to

More information

Marine Catalogue 2013

Marine Catalogue 2013 Marine Catalogue 2013 escription Moel Packaging Hep 2 O Barrier Pipe Re Conuit 15 L = 50 mtr WBCL010305A orer pipe by unit (coil) not by meter 22 L = 50 mtr WBCL010306A straight connector 15 10 pieces

More information

PRODUCT MANUAL - M090

PRODUCT MANUAL - M090 PRODUCT MANUAL - M090 MODEL 203/266 ELECTRIC CAN OPENER 1 SAFETY CAUTION: SEVERED CAN LIDS HAVE CUTTING EDGES. USE OF A PROTECTIVE GLOVE OR TONGS IS ADVISED WHEN HANDLING LIDS. WARNING To avoid risk of

More information

4/2-Way Pneumatic Solenoid Valve

4/2-Way Pneumatic Solenoid Valve 4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug

More information

UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves

UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking

More information

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24 Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical

More information

PARTS LIST DOMESTIC. Eclipse Ergonomic Tilting Braising Pans. BPP-30E, BPP-40E Braising Pans Circa 2003 to Present

PARTS LIST DOMESTIC. Eclipse Ergonomic Tilting Braising Pans. BPP-30E, BPP-40E Braising Pans Circa 2003 to Present IMPORTANT INFORMATION KEEP FOR OPERATOR IMPORTANT INFORMATION PARTS LIST DOMESTIC This manual provides s for: Eclipse Ergonomic Tilting Braising Pans MODELS: BPM-30E, BPM-40E BPP-30E, BPP-40E Braising

More information

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective

More information

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge! Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm

More information

Pressure monitoring equipment for oil-sf 6. bushings, type GOEK

Pressure monitoring equipment for oil-sf 6. bushings, type GOEK Pressure monitoring equipment for oil-sf 6 bushings, type GOEK Installation and maintenance guide 5693 827-6 en, Rev. 3, 2002-01-30 This document must not be copied without our written permission, and

More information

DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information

DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2... Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast

More information

Edge 28B. Simple. Clean. PARTS LIST KENT model: 908 4703 010 146 3087 000(1)2007-01

Edge 28B. Simple. Clean. PARTS LIST KENT model: 908 4703 010 146 3087 000(1)2007-01 PARTS LIST KENT model: 908 4703 010 Simple. Clean. 2007-01 2 2007-01 TABLE OF CONTENTS 1 DESCRIPTION PLAN GENERAL VIEW 2-3 CHASSIS SYSTEM 4-5 SIDE BROOM ASSEMBLY 6-7 HOPPER SYSTEM 8-9 TRANSMISSION SYSTEM

More information

Cable Plug acc. to DIN EN 175301-803, Form A

Cable Plug acc. to DIN EN 175301-803, Form A Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with

More information

1ZSE 2750-105 en, Rev. 8. Transformer bushings, type GOE and GOE(2) Technical guide

1ZSE 2750-105 en, Rev. 8. Transformer bushings, type GOE and GOE(2) Technical guide 1ZSE 2750-105 en, Rev. 8 Transformer bushings, type GOE and GOE(2) Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible

More information

LSB Series. Valve Position Monitor. www.powergenex.com. All innovation on driving your valve automation

LSB Series. Valve Position Monitor. www.powergenex.com. All innovation on driving your valve automation LS Series Valve Position Monitor ll innovation on driving your valve automation www.powergenex.com LS-1000 Series Valve Position Monitor Robust valve position monitor with a good recognizable beacon, various

More information

TOOL SCHEMATIC AND PARTS MODEL 3150/38 W16R STAPLER

TOOL SCHEMATIC AND PARTS MODEL 3150/38 W16R STAPLER P MODEL 3150/38 W16R STAPLER IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #403606 for detailed information on this tool. It is the customer's responsibility to have all operators

More information

Cable & Wire Management

Cable & Wire Management able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...

More information

Meritor Trailer Products

Meritor Trailer Products Meritor Trailer Products Contents LM & LC...5 TA & TC...37 TE...63 TM...77 Steering Axles...105 Flexair & Flexlite...119 Indair...171 SMT...181 AXL...193 3 4 Meritor Trailer Products Axle & Brake Parts

More information

UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted

UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils

More information

11mm Size Metal Shaft Type

11mm Size Metal Shaft Type ncoder 11mm Size Metal Shaft 1 Series Compact and highly reliable type available in many varieties. NW Features Compact and highly accurate sliding contact type encoder. 1.mm-travel push switch with compliance

More information

Solenoid valves 2/2-way direct-operated Type EV210A

Solenoid valves 2/2-way direct-operated Type EV210A Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral

More information

FDH Series Compact Finger Slides

FDH Series Compact Finger Slides FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for

More information

System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8

System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8 System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures

More information

This instruction is valid for all ACD pump models shown on page 2

This instruction is valid for all ACD pump models shown on page 2 Screw pumps ACD Maintenance and Service Instruction This instruction is valid for all ACD pump models shown on page 2 Contents Page List of components 2 Exploded view/ordering code 3 Service intervals

More information

Check Valves & Actuated Valves

Check Valves & Actuated Valves heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric

More information

Section G TEL-E-FOUL

Section G TEL-E-FOUL Section G TEL-E-FOUL December 2009 1G Index 1. 53-860155-001 Cover w/lens ( 2000 Brown) 2. 53-400241-000 Cover Only (Dark Gray) 53-860995-012 Covers - Pkg. of 2 (Dark Gray) 3. *53-600077-000 Lens (Red)

More information

Single sub-base valve

Single sub-base valve solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

DOUBLE ACTING CYLINDERS, Ø 32 to 125 mm

DOUBLE ACTING CYLINDERS, Ø 32 to 125 mm DOUBLE ACTING CYLINDERS, 3 to 15 mm conforming to ISO 6431 - VDMA 456 STANDARDS SERIES 450 - TYPE : PES (with profiled barrel) P30-GB.R8 DOUBLE ACTING PNEUMATIC CYLINDERS - TYPE PES WITH PROFILED BARREL

More information

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves 1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire

More information

Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS

Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature

More information

TECHNICAL CHARACTERISTICS. Series K---- Codification key SERIES

TECHNICAL CHARACTERISTICS. Series K---- Codification key SERIES Pneumatic cylinders mm according to ISO 643 and VDMA 56 with adjustable cushioning UNIVER pneumatic cylinders which comply with ISO 643 and VDMA 56 standards, take advantage of the improvements arising

More information

Control Stations Made of Polyester Resin Series 8146

Control Stations Made of Polyester Resin Series 8146 ontrol Stations Made of Polyester Resin www.stahl.de > s made of glass-fibre reinforced polyester resin > 8 basic enclosure sizes with various enclosure heights > an be combined to larger units > Equipped

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

7.1. Part Lists. Hardware Insertion Machine. Instructions. Instructions

7.1. Part Lists. Hardware Insertion Machine. Instructions. Instructions Instructions Instructions The Parts in this section of the manual are listed by Item Number, Part Number, Description and Quantity. The Item Numbers are in a circle with an arrow pointing to the specific

More information

Pneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US

Pneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series

More information

Stainless Steel Single and Dual Circulation Kits

Stainless Steel Single and Dual Circulation Kits Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information