Specifications. S&C Power Fuses Types SM- 4, SM-5, SMD-20, and SMD-40 d Outdoor Distribution (4.16 kv through 34.5 kv)

Transcription

1 S&C Power Fuses Types SM- 4, SM-5, SMD-0, and SMD-40 d Outdoor Distribution (4.16 kv through kv) For use with SM Refill Units or SMU Fuse Units Specifications Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet apply, except as modified under WARRANTY QUALIFICATIONS on page. SPECIAL TO THIS PRODUCT: INCLUSIONS: SMD-0 and SMD-40 Mountings Complete mountings include fuse-unit end fittings. Fuse-unit end fittings for SMD-40 Power Fuses include Silencer. A choice of connector arrangements is available with complete mountings as listed in the table on page 13. Specify the connector arrangement desired by adding the appropriate suffix letter to the catalog number of the selected mounting. Each overhead pole-top style SMD-0 Mounting includes mounting bracket and hardware. EXCLUSIONS: SMD-0 and SMD-40 Mountings Mountings do not include fuse units. SM-4 and SM-5 Mountings Complete mountings and live parts do not include holders or refill units. Complete mountings and live parts do not include con nectors. Various connectors are available as listed in the table on page 14. Specify quantity and catalog number of connectors desired. SPECIFICATION DEVIATIONS: SMD-0 and SMD-40 Mountings Live parts are not available separately for SMD-0 and SMD-40 Power Fuses. Station style SMD-0 and SMD-40 Mountings are offered with a choice of Cypoxy a or porcelain station post insulators. The standard insulator color is gray. When mountings are to be provided with special insulators, consult your nearest S&C Sales Office for availability. Station style mountings (except station right-angle style) can be supplied less insulators; add suffix -Z1 to the catalog number. Station style mountings (except station right-angle style) of a given voltage rating can be provided with insu lators of the next lower voltage rating add suffix -Z to the catalog number, or the next higher voltage rating add suffix -Z3 to the catalog number.f Station style mountings cannot be supplied less bases. Station style mountings (except station right-angle style) can be supplied with tin-plated terminal pads. To specify, add suffix -Z5 to the catalog number. Overhead pole-top style SMD-0 Mountings cannot be supplied less insulators. SM-4 and SM-5 Mountings SM-4 and SM-5 Mountings are offered with a choice of Cypoxy or porcelain station post insulators. The standard insulator color is gray. When mountings are to be provided with special insulators, consult your nearest S&C Sales Office for availability. Mountings can be supplied less insulators; add suffix Z1 to the catalog number. Mountings of a given voltage rating can be provided with insulators of the next lower voltage rating add suf fix -Z to the catalog number, or the next higher voltage rating add suffix -Z3 to the catalog number.f Mountings can be supplied less bases but including insulators, add suffix -Z4 to the catalog number. Mountings can be supplied with tin-plated terminal pads. To specify, add suffix -Z5 to the catalog number. Disconnect style parallel SM-5 Power Fuses are furnished with aluminum terminal pads as a standard feature. a Cypoxy is the S&C trademark for S&C s cycloaliphatic epoxy resin system. Cypoxy is nontracking, self-scouring, nonweathering... there s never a compromise of insulation integrity. S&C Cypoxy station post insu lators meet or exceed the electrical and mechanical-strength require ments established in ANSI Standard C9.9 (1983) for porcelain standard-strength station post insulators. f Mountings rated 4.8 kv or 7. kv cannot be provided with lower rated insulators. Fuse mountings rated kv provided with insulators of the next lower voltage rating will be furnished with porcelain station post insulators rated 7. kv, T.R. No. 0. Fuse mountings rated kv provided with insulators of the next higher voltage rating will be furnished with porcelain station post insulators rated 46 kv, T.R. No. 14. d S&C Power Fuses Types SM and SMD are manufactured in accordance with a quality system certified to ISO 9001:0, and they are Rural Utilities Service (RUS) accepted. October 4, 010 S&C Electric Company Specification Bulletin 4-31

2 Conditions of Sale Continued WARRANTY QUALIFICATIONS: SMD-0 and SMD-40 Mountings The standard warranty contained in seller s standard con ditions of sale (as set forth in Price Sheet ) does not apply to S&C SMD-0 or SMD-40 Mountings when installed in conjunction with fuse units or end fittings of other than S&C manufacture, nor does it apply to S&C fuse units or end fittings installed in mountings of other than S&C manufacture. SM-4 and SM-5 Mountings For the standard warranty contained in seller s standard conditions of sale (as set forth in Price Sheet ) to apply to live parts when ordered separately, the live parts must be assembled on mountings in accordance with S&C Instruction Sheet The standard warranty contained in seller s standard conditions of sale (as set forth in Price Sheet ) does not apply to S&C SM Mountings when installed in con junction with fuses of other than S&C manufacture. S&C Specification Bulletin 4-31

3 How to Order a Complete Power Fuse Types SMD-0 and SMD Obtain the catalog number of the desired mounting from the column entitled, Mounting on pages 4 and 5. Note: Live parts for SMD-0 or SMD-40 Power Fuses cannot be ordered separately.. Obtain the catalog number of the applicable SMU-0 or SMU-40 fuse unit from the tables on pages 7 through 9, taking care to match the voltage rating of the fuse unit to that of the mounting. 3. Select the desired connector arrangement from the table on page 13. Add the indicated suffix letter to the catalog number of the mounting selected in Step 1, above. 4. Obtain the catalog number of desired conversion kits, parts, and maintenance supplies from the tables listed on page 15. How to Order Handling Tools Obtain the catalog number(s) of recommended handling tool(s) from the table on page 15. Refer to Specification Bulletin Types SM-4 and SM-5 1. Obtain the catalog number of the desired mounting from the column entitled, Mounting on page 6. If only live parts are desired, refer to the LIVE PARTS table on page 16.. Obtain the catalog number of the applicable holder from the Holder column on page 6, reading from the same line in which the selected mounting is listed. 3. Obtain the catalog number of the applicable refill unit from the tables on pages 10 through 1, taking care to match the voltage rating of the refill unit to that of the mounting. Note: For each mounting rated 70E amperes, order two holders and two refill units. 4. Obtain the catalog number of the desired connector from the table on page 14. Order two connectors for each mounting or set of live parts. 5. Obtain the catalog number of desired parts from the table listed on page 16. How to Order Handling Tools Obtain the catalog number(s) of recommended handling tools(s) from the table on page 16. Refer to Specification Bulletin S&C Specification Bulletin

4 SMD-0 AND SMD-40 MOUNTINGS Less Connectors1 Style Overhead Pole-Top67 Type SMD-0 Rating, RMS, kv Sym.3 Inter- Nom. Max BIL Max4 rupting d Leakage Distance to Ground, Minimum, Inches (mm) 11 (9) 17 (43) 17 (43) Mounting (including Live Parts and End Fittings, less Connectors5) Polymer Catalog Number 914R3-Pa Catalog Number 91R3a 914R3a 913R3a Page Reference for Dimensional Information d (660)k 913R3-Pa 9143R3ah 17 Overhead Pole-Top67 SMD Z\x (648) 944R3a 18 1 For available connector arrangements, refer to the table on page 13. SMD-0 and SMD-40 Live Parts are not available separately. 3 Symmetrical ratings assigned are based on available short-circuit cur rent at locations where the X/R ratio is 15. The interrupting ratings expressed in amperes, RMS asymmetrical are 1.6 times the symmetrical ratings listed. Higher symmetrical ratings have been determined for SMD 0 Power Fuses where X/R = 10 and X/R = 5. These higher ratings as well as asymmetrical ratings are given in S&C Descriptive Bulletin SMU-0 Fuse Units for use in SMD-0 Mountings are available in ratings through K amperes, as well as amperes, and 0 DR. 5 Specify connectors, if desired, by adding the appropriate suffix letter to catalog number. For example, SMD-0 Outdoor Distribution Power Fuse Mounting, Station Vertical-Offset Style, 19R-L. (See table, page 13.) 6 All SMD-0 Mountings are equipped with attachment hook to accommodate Loadbuster. 7 Connectors must be specified for Overhead Pole-Top Style and Right-Angle Style SMD-0 Mountings, refer to the table on page 13. d Also suitable for protection of single-phase-to-neutral circuits (lines or transformers) on 0/ GrY-kV systems. k Leakage distance to ground is 6 inches (660 mm) for Catalog Number 9143R3, 30 inches (76 mm) for 913R3-P. a For provisions only for NEMA pad-terminal connectors or two-hole compression connectors, add suffix -G to catalog number. h Meets 170 kv BIL rating requirement of IEC Publication S&C Specification Bulletin 4-31

5 SMD-0 AND SMD-40 MOUNTINGS Less Connectors1 Style Station Vertical-Offset6 Type kv Rating Nom. Max BIL Max4, RMS, Sym.3 Interrupting Leakage Distance to Ground, Minimum, Inches (mm) of Mounting (Including Live Parts and End Fittings, less Connectors5) Cypoxy Station Post Station Post Page Reference for Dimensional Information Z\x (394) 19R-E 19R 19 SMD (610) 193R-E 193R (940) 1904-E Station Inverted Z\x (394) 199-E SMD (610) 1993-E (940) 1994-E Station Right-Angle67 SMD Z\x (394) 4 (610) 37 (940) 193R3-Ea 1933R3-Ea 1934R3-Ea 193R3a 1933R3a 1934R3a Station Vertical E Z\x (394)f SP SMD E Z\x (394) SP 9 400E (610) SP 1 For available connector arrangements, refer to the table on page 13. SMD-0 and SMD-40 Live Parts are not available separately. 3 Symmetrical ratings assigned are based on available short-circuit cur rent at locations where the X/R ratio is 15. The interrupting ratings expressed in amperes, RMS asymmetrical are 1.6 times the symmetrical ratings listed. Higher symmetrical ratings have been determined for SMD 0 Power Fuses where X/R = 10 and X/R = 5. These higher ratings as well as asymmetrical ratings are given in S&C Descriptive Bulletin SMU-0 Fuse Units for use in SMD-0 Mountings are available in ratings through K amperes, as well as amperes, and 0 DR. 5 Specify connectors, if desired, by adding the appropriate suffix letter to catalog number. For example, SMD-0 Outdoor Distribution Power Fuse Mounting, Station Vertical-Offset Style, 19R-L. (See table, page 13.) 6 All SMD-0 Mountings are equipped with attachment hook to accommodate Loadbuster. 7 Connectors must be specified for Overhead Pole-Top Style and Right-Angle Style SMD-0 Mountings, refer to page SMD-40 Mountings can be equipped with an optional attachment hook to accommodate Loadbuster. Specify by adding suffix -LB to the catalog number of the SMD-40 Mounting. a For provisions only for NEMA pad-terminal connectors or two-hole compression connectors, add suffix -G to catalog number. f Mounting includes -kv -kv BIL Cypoxy station post insulators. Leakage distance to ground is 10Z\x inches (67 mm) for mountings with 95-kV BIL porcelain station post insulators; i.e., 1930-SP. S&C Specification Bulletin

6 SM MOUNTINGS AND HOLDERS Less Refill Units Style Disconnect 180 Opening Vertical5 Type SM-4 kv Rating Nom. Max BIL Max , RMS, Sym.1 Interrupting Mounting (Including Live Parts, less Connectors3 less Holder) Cypoxy Station Post R1-Ef 19050R1-E R1-E R1-E Station Post R R R R1 Holder Page Reference for Dimensional Information SM E 70E 400E 70E d 000k R-Ef R3-Ef 19060R-E 19056R3-E R-E R-E R R R 19056R R R 86151R 86151Rl 8615R 8615Rl 86153R 86154R 86154R Disconnect 90 Opening Inverted SM E 400E d R-Ef 19080R-E R-E R-E R 19080R R R 86191R 8619R 86193R 86194R 86194R Non-Disconnect Vertical SM R1-Efh 19030R1-Eh R1-Eh R1-Eh R1h 19030R1h R1h h R1h SM E 400E d R-Efh 19040R-Eh R-Eh R-Eh Rh 19040Rh Rh h Rh 86141R 8614R 86143R 86144R 86144R Non-Disconnect Upright SM R1-Efh 19030R1-Eh R1-Eh R1-Eh R1h 19030R1h R1h h R1h 8681h h 8684h SM E 400E d R-Efh 19040R-Eh R-Eh R-Eh Rh 19040Rh Rh h Rh 861R 86R 863R 864R 864R 1 Symmetrical ratings assigned are based on available short-circuit cur rent at locations where the X/R ratio is 15. The interrupting ratings expressed in amperes, RMS asymmetrical are 1.6 times the symmetrical ratings listed. Higher symmetrical ratings have been determined for these fuses applied at lower system voltages and in locations where X/R = 10 and X/R = 5. These higher ratings as well as asymmetrical ratings are given in S&C Descriptive Bulletin For live parts furnished separately, refer to the table on page For available connectors, refer to the table on page Holder does not carry Snuffler or Silencer. 5 All SM-4 Mountings in the Disconnect 180 Opening Vertical Style can be equipped with attachment hook to accommodate Loadbuster. Specify by adding suffix -LB to catalog number of the mounting. d 60-hertz rating. For systems rated above 15.5 kv through kv, interrupting rating is,000 amperes, RMS symmetrical, 50/60 hertz. k 60-hertz rating. f Mounting includes -kv -kv BIL Cypoxy station post insulators. h Product discontinued. l Two holders required with each mounting. 6 S&C Specification Bulletin 4-31

7 SWITCH BLADES Rating Item Nom. kv Max, Cont. Catalog Number Switch Blades, for use instead of SM-4 Holders in Disconnect 180 Opening Vertical Style SM-4 Mountings Switch Blades, for use instead of SM-5 Holders in Disconnect 180 Opening Vertical Style SM-5 Mountings Switch Blades, for use instead of SMU-0 Fuse Units in all styles except Station Inverted SMD-0 Mountings SMU-0 FUSE UNITS (For use in SMD-0 Mountings) kv Nominal, kv Max K Ratings E Ratings DR Ratings Catalog Number Catalog Number S&C K TCC 165- TCC 115- S&C DR TCC TCC 153- TCC 119- S&C Very Slow TCC 176-3K 6K 8K 10K 1K 15K 0K K 30K 40K 50K 65K 80K 100K 140K K E 7E 10E 13E 15E 0E E 30E 40E 50E 65E 80E 100E 1E E 175E DR 4DR 5DR 7DR 10DR 15DR 0DR S&C Specification Bulletin

8 SMU-0 FUSE UNITS (For use in SMD-0 Mountings) Continued kv Nominal, kv Max1 K Ratings E Ratings DR Ratings Catalog Number Catalog Number S&C K TCC 165- TCC 115- S&C DR TCC TCC 153- TCC 119- S&C Very Slow TCC 176-3K 6K 8K 10K 1K 15K 0K K 30K 40K 50K 65K 80K 100K 140K K E 7E 10E 13E 15E 0E E 30E 40E 50E 65E 80E 100E 1E E 175E DR 4DR 5DR 7DR 10DR 15DR 0DR kv Nominal, kv Max K Ratings E Ratings DR Ratings Catalog Number Catalog Number S&C K TCC 165- TCC 115- S&C DR TCC TCC 153- TCC 119- S&C Very Slow TCC 176-3K 6K 8K 10K 1K 15K 0K K 30K 40K 50K 65K 80K 100K 140K K E 7E 10E 13E 15E 0E E 30E 40E 50E 65E 80E 100E 1E E 175E DR 4DR 5DR 7DR 10DR 15DR 0DR Also suitable for protection of single-phase-to-neutral circuits (lines or transformers) on 0/ GrY-kV systems. 8 S&C Specification Bulletin 4-31

9 SMU-40 FUSE UNITS (For use in SMD-40 Mountings) 4.8 kv Nominal, 5.5 kv Max kv Nominal, kv Max kv Nominal, 9 kv Max TCC 115- TCC 115- TCC E 5E 7E 10E 13E 15E 0E E 30E 40E 50E 65E 80E 100E 1E E 175E 0E 400E TCC TCC TCC TCC TCC TCC S&C Specification Bulletin

10 SM-4 REFILL UNITS (For use in SM-4 Holders) 7. kv Nominal, 8.3 kv Max1 kv Nominal, kv Max 1 3E 5E 7E 10E 13E 15E 0E E 30E 40E 50E 65E 80E 100E 1E E 175E 10 TCC R4 1100R4 TCC R R R R4 1100R4 110R R R R R R4 10R4 111R4 11R4 11R4 110R4 115R R4 TCC R4 1030R4 1040R4 1050R4 1060R4 1075R4 0R4 11R4 1R4 1R4 10R4 15R4 1300R4 TCC R4 1R4 TCC R4 1R4 1010R4 1015R4 100R4 10R4 1030R4 1040R4 1050R4 1060R4 1075R4 1100R4 11R4 1R4 1R4 10R4 15R4 1300R4 TCC R4 030R4 040R4 050R4 060R4 075R4 100R4 1R4 R4 R4 0R4 5R4 300R4 S&C Coord. TCC R4f 1 3E 5E 7E 10E 13E 15E 0E E 30E 40E 50E 65E 80E 100E 1E E 175E kv Nominal, kv Max kv Nominal, kv Max TCC R4 1300R4 TCC R R R R4 1300R4 130R R R R R R R4 131R4 13R4 13R4 130R4 135R R4 TCC R4 3030R4 3040R4 3050R4 3060R4 3075R4 3100R4 31R4 3R4 3R4 30R4 35R4 3300R4 1 Rated 7. kv nominal for use in SM-4 Holders rated 7. kv. f This S&C Coordinating refill unit should be applied where the maximum continuous load current does not exceed amperes and where all fault currents below 1000 amperes will be cleared by another fuse. TCC R4 1400R4 TCC R R R R4 1400R4 140R R R R R R R4 141R4 14R4 14R4 140R4 145R R4 TCC R4 4030R4 4040R4 4050R4 4060R4 4075R4 4100R4 41R4 4R4 4R4 40R4 45R4 4300R4 10 S&C Specification Bulletin 4-31

11 SM-5 REFILL UNITS (For use in SM-5 Holders) 1 3E 5E 7E 10E 13E 15E 0E E 30E 40E 50E 65E 80E 100E 1E E 175E 0E 400E E 5E 7E 10E 13E 15E 0E E 30E 40E 50E 65E 80E 100E 1E E 175E 0E 400E TCC R R4 TCC R R R R R4 1300R R R R R R R4 1301R4 130R4 130R4 1300R4 1305R R R R R4 TCC R4 13R4 TCC R4 137R R R4 1300R4 130R R R R R R R4 131R4 13R4 13R4 130R4 135R R R4 1300R R kv Nominal, 4.76 kv Max1 7. kv Nominal, 8.3 kv Max TCC R R R R R R R4 601R4 60R4 60R4 600R4 605R R R R R4 S&C Coord. TCC R4df 140R4df TCC R R4 TCC R R R R R4 1310R R R R R R4 130R4 1311R4 131R4 131R4 1310R4 1315R R R4 130R R4 TCC R4 60R R4 kv Nominal, kv Max kv Nominal, kv Max TCC R4 6030R4 6040R4 6050R4 6060R4 6075R4 6100R4 61R4 6R4 6R4 60R4 65R4 6300R4 6400R4 600R4 6600R4 1 Rated 4.16 kv nominal, for use in SM-5 Holders rated 7. kv when applied in listed mountings rated 7. kv for system voltages through 4.16 kv. Rated 7. kv nominal, for use in SM-5 Holders rated 7. kv when applied in listed mountings rated 7. kv for system voltages through 4.8 kv through 7. kv. d Catalog numbers are in italics because these are 7.-kV refill units. S&C Coord. TCC R4f 40R4f TCC R R4 TCC R R R R R4 1330R R R R R R R4 1331R4 133R4 133R4 1330R4 1335R R R R4 TCC R R R R R R R4 631R4 63R4 63R4 630R4 635R R R R4 S&C Coord. TCC R4f 140R4f Interrupting ratings are those listed in S&C Descriptive Bulletin 4-30 for 7.-kV SM-5 Power Fuses applied to systems rated.4/4.16 Y kv. f These S&C Coordinating refill units should be applied where the maximum continuous load current does not exceed 400 amperes and where all fault currents below 3000 amperes for s 1410R4 and 410R4 and 4000 amperes for s 140R4 and 40R4 will be cleared by another fuse. S&C Specification Bulletin

12 SM-5 REFILL UNITS (For use in SM-5 Holders) 1 kv Nominal, kv Max TCC R R4 TCC TCC E 5E 7E 10E 13E 15E 0E E 30E 40E 50E 65E 80E 100E 1E E 175E 0E R R R R R4 1340R R R R R R R4 1341R4 134R4 134R4 1340R4 1345R R R R4 640R R R R R R R4 641R4 64R4 64R4 640R4 645R R R R4 1 S&C Specification Bulletin 4-31

13 CONNECTORS Two Provided per Mounting For use with SMD-0 and SMD-40 Mountings Illustration Description Parallel-Groove Connectors To Specify Connector Arrangement Accommodating Conductors Size and Material Two No. 6 solid (13.3 mm ) through No. stranded (44.4 mm ) copper or aluminum in one groove, No. solid (33.6 mm ) through 0 kc mil (168 mm ) stranded copper or aluminum, or 4/0 ACSR (161 mm ) in the other groove Add Catalog Number Suffix -Dd Bronze Body, Tin Plated, Single Z\x 13 3 Z\x Galvanized Steel Bolt. Same as 4740R1 Aluminum-Alloy Body, Tin Plated, Two Z\x 13 3 Z\x Galvanized Steel Bolts. Same as 4744 Provision only for NEMA pad-terminal connectors or two-hole compression connectors. Includes tin plated terminal adapters but does not include hardware No. solid (33.6 mm ) through 500 kc mil (335 mm ) stranded copper or aluminum, or kc mil ACSR (39 mm ) No. solid (33.6 mm ) through 500 kc mil (335 mm ) stranded copper or aluminum, or kc mil ACSR (39 mm ) -K -L -Gd Eye-Bolt Connectors No. 8 solid (8.4 mm ) through 0 kc mil (168 mm ) stranded copper or aluminum, or 4/0 ACSR (161 mm ) -Md d Applies only to station right-angle and overhead pole-top style SMD-0 Mountings. S&C Specification Bulletin

14 CONNECTORS For use with SM-4 and SM-5 Mountings Illustration and Description Accommodating Conductor Upper Terminal Pad Lower Terminal Pad Aluminum Alloy Body, Tin Plated, Two Z\x 13 3 C\v Galvanized Steel Bolts No. solid (33.6 mm ) through 500 kc mil (335 mm ) stranded copper or aluminum 4741R Aluminum Alloy Body, Tin Plated, Two Z\x 13 3 Z\v Galvanized Steel Bolts Standard Bronze-Pad Terminal, Tin Plated, Four-Bolt. Includes Z\x-inch galvanized steel hardware for attachment to terminal pads of fuses No. solid (33.6 mm ) through 500 kc mil (335 mm ) stranded copper or aluminum No. 6 solid (13.3 mm ) through 0 kc mil (168 mm ) copper or aluminum 1/0 solid (53.5 mm ) through 500 kc mil (335 mm ) copper or aluminum /0 stranded (89 mm ) through 800 kc mil (539 mm ) copper or aluminum R1-A 4564R1-B 4565R1-A 4565R1-B 4567R1-A 4567R1-B 14 S&C Specification Bulletin 4-31

15 CONVERSION KITS For use with SMD-0 Power Fuses Item Conversion Kit, adapts superseded -kv station vertical-offset style mountings1 to accept shorter, 8Z\x-inch (74 mm) -kv SMU-0 Fuse Units listed on page 8 [superseded length was 34Z\v inches (870 mm)] 56 1 Identified by the following catalog numbers: 94R 94R1 194R 194R1 194R-HF 194R1-HF HF PARTS For use with SMD-0 and SMD-40 Power Fuses Item Spare Fuse-Unit End Fittings for use in SMD-0 Mountings, all styles except Station Inverted For Fuse Unit Rated, kv, Nominal From To Spare Fuse-Unit End Fittings for use in SMD-0 Mountings, Station Inverted Style 3096 Spare Fuse-Unit End Fittings for use in SMD-40 Mountings, Station Vertical Style d Replacement Silencers for use in SMD-40 Mountings, Station Vertical Style 4.8 FDA-1064 d Includes Silencer. MAINTENANCE SUPPLIES For use with SMD-0 and SMD-40 Power Fuses Item For Fuse Unit Fuse-Unit Recoating Kit one-half pint Light Gray Epoxy Polyester Gloss Enamel 13-E-1 and one-half pint Catalyst 13-C-0 (two coats for ten fuse units).1 Requires thinner listed below All Thinner for above one pint All FA Shelf life is one year from date of manufacture. RECOMMENDED HANDLING TOOLS For use with SMD-0 and SMD-40 Power Fuses Item Large Clampf Station Prong 4410R3 440R Distribution Prong 4416 Talon 4440 Universal Pole l f For installing and removing fuse units in SMD-40 Power Fuse Mountings. l Select to match height of installation. Refer to Specification Bulletin S&C Specification Bulletin

16 LIVE PARTS For SM-4 and SM-5 Power Fuses Item For Fuse Type SM Disconnect, 180 Opening Vertical SM-5 SM-5 (Parallel) 87519R 87169R3 Disconnect, 90 Opening Inverted SM R PARTS For use with SM-4 and SM-5 Power Fuses Item Rated (kv, Nominal) For Holder Type Spare Spring-and-Cable Assembly or 3 or SM-4 SM-5 SM-4 SM-5 SM-4 SM-5 SM-4 SM-5 FA-97 FA-341d FA-973 FA-34d FA-974 FA-343d FA-975 FA-344d Pull-Ring Assembly for Holder, Disconnect, 180 Opening Vertical 7. through 7. through SM-4 SM-5 FDA-10 FDA-10 Pivot/Rain Shield Assembly for Holder, Disconnect, 180 Opening Vertical 7. through 7. through SM-4 SM-5 FDA-108 FDA-109 d For use only in holders carrying an arrow-shaped nameplate. Springand-cable assemblies for holders which do not carry an arrow-shaped nameplate are no longer available so a new holder with the appropriate voltage rating must be ordered. RECOMMENDED HANDLING TOOLS For use with SM-4 and SM-5 Power Fuses Item Style For Fuse Mounting Type Locking Prong Disconnect 90 Opening Inverted SM Station Prong Disconnect 180 Opening Vertical and Disconnect 90 Opening Inverted SM-4 or SM-5 440R Universal Pole l l Select to match height of installation. Refer to Specification Bulletin S&C Specification Bulletin 4-31

17 SMD-0 Power Fuse Overhead Pole-Top Style Dimensions in inches (mm) kv Rating Nom. Max BIL Amps, Max Leakage Distance to Ground Minimum, Inches (mm) 1 (Complete Mounting Incl. Live Parts and End Fittings, less Connectors) Polymer Dimensions in Inches (mm) A 1 A M 1 M P R 1 R S3 Polymer Net Wt., Lbs. (Kg.) 1 11 (9) 91R3d 1M\, (3) 6B\, (168) 8B\, (7) 30 (76) 5Z\x (140) 1Z\x (546) 14 (356) 6M\, (175) 3 (10) 17 (43) 914R3-Pd 914R3d 1M\, (3) 6B\, (168) 8B\, (7) 30 (76) 5Z\x (140) 1Z\x (546) 14 (356) 6M\, (175) 17 (8) (1) a 17 (43) 913R3d 13C\, (340) 5C\, (137) 31Z\x (800) 35Z\, (89) 4M\, (14) Z\zn (560) 15B\, (397) 8Z\v (10) (11) a 6j (660) 913R3-Pd 9143R3d 13C\, (340) 5C\, (137) 31Z\x (800) 35Z\, (89) 4M\, (14) Z\zn (560) 15B\, (397) 8Z\v (10) 19 (9) 30 (14) 1 All SMD-0 Mountings are equipped with attachment hook to accommodate Loadbuster. Connectors must be specified, refer to the table on page Dimension applies to mounting furnished with optional parallel-groove connectors (mounting catalog number suffix -D ). Dimension varies for mountings furnished with other connector arrangements. a Also suitable for protection of single-phase-to-neutral circuits (lines or transformers) on 0/ GrY-kV systems. d For provisions only for NEMA pad-terminal connectors or two-hole compression connectors, add suffix -G to catalog number. j Leakage distance to ground is 6 inches for 9143R3, 30 inches for 913R3-P. S&C Specification Bulletin

18 SMD-0 Power Fuse Overhead Pole-Top Style Dimensions in inches (mm) 14C\v (375) 3Z\, (587) 37 (940) 10Z\v (60) 19 (483) 3B\, (9) 45Z\, (1146) kv Rating Nom. Max BIL Amps, Max Leakage Distance to Ground Minimum, Inches (mm) 1 (Complete Mounting Incl. Live Parts and End Fittings, less Connectors) Net Wt., Lbs. (Kg.) Z\x (648) 944R3d 33 (15) 1 All SMD-0 Mountings are equipped with attachment hook to accommodate Loadbuster. Connectors must be specified, refer to the table on page 13. d For provisions only for NEMA pad-terminal connectors or two-hole compression connectors, add suffix -G to catalog number. 18 S&C Specification Bulletin 4-31

19 SMD-0 Power Fuse Station Vertical-Offset Style Dimensions in inches (mm) 1Z\x () 8M\, () 7 (178) >\zn (14) DIA. HOLES ON 10 () CENTERS (18 per side) Z\, (3) >\zn (14) DIA. HOLES ON 1C\v0 (44) CENTERS SEE NOTE B\zn (8) (51) >\zn 3 1>\zn ( ) SLOTS ON 0 (51) CENTERS NOTE: Terminal pads provided on both sides of fuse mounting. kv Rating Nom. Max BIL Amps, Max Leakage Distance to Ground Minimum, Inches (mm) (Complete Mounting Incl. Live Parts and End Fittings, less Connectors)1 Cypoxy Station Post Station Post Dimensions in Inches (mm) A 1 A B C F L M 1 M N R Number of slots per side Net Wt., Lbs. (Kg.) Cypoxy Station Post Station Post 15Z\x (394) 4 (610) 37 (940) 19R-E 193R-E 19R 193R 1904-E M\, (505) 4C\v (69) 30C\, (77) 14Z\x (368) 18Z\x (470) Z\x (57) 1 All SMD-0 Mountings are equipped with attachment hook to accommodate Loadbuster. 10 (4) 14 (356) 18 (457) (686) 18ZC\zn (478) 31 (787) 39 (991) Z\v (565) 8 (711) (635) 9 (737) 37 (940) 36C\, (94) 18C\, (467) 43M\, (1114) (556) 1M\, 53M\, (1368) (708) M\, 4Z\zn (103) 4C\, (111) 5Z\x (140) B\, (70) 3B\, (89) Z\, (968) () 77 (35) 98 (44) 74 (34) 104 (47) 136 (6) For available connector arrangements, refer to the table on page 13. S&C Specification Bulletin

20 SMD-0 Power Fuse Station Inverted Style Dimensions in inches (mm) 1Z\x () 8M\, () 7 (178) >\zn (14) DIA. HOLES ON 10 () CENTERS (51) 3Z\x (89) C\v (19) >\zn (14) DIA. HOLES ON 1C\v0 (44) CENTERS >\zn 3 1>\zn SLOTS ( ) kv Rating Nom. Max BIL Amps, Max Leakage Distance to Ground Minimum, Inches (mm) 15Z\x (394) 4 (610) 37 (940) (Complete Mounting Incl. Live Parts and End Fittings, less Connectors)1 Cypoxy Station Post Station Post 199-E E E 1994 Dimensions in Inches (mm) A 1 A B C D F L M 1 M N R 14C\, (365) 18C\, (467) C\, (568) 14Z\, (359) 18Z\, (460) Z\, (56) 1 All SMD-0 Mountings are equipped with attachment hook to accommodate Loadbuster. 10 (4) 14 (356) 18 (457) Net Wt., Lbs. (Kg.) Cypoxy Station Post Station Post 17M\, 17Z\v 35B\, 18C\, 4 Z\, (635) (454) (4) (559) (905) (467) (10) (56) (4) (30) 9 1M\, 0C\v 6 43Z\, 1M\, 4Z\v 6Z\, (737) (556) (5) (660) (1095) (556) (108) (664) (3) (44) 35 M\, 6C\v 3 53Z\, M\, 4Z\v 30Z\, (889) (657) (679) (813) (1349) (708) (108) (765) (41) (58) For available connector arrangements, refer to the table on page S&C Specification Bulletin 4-31

21 SMD-0 Power Fuse Station Right-Angle Style Z\x (64) 5 (1) Dimensions in inches (mm) 1 () ZZ\zn (17) DIA. HOLES 3 (76) 1Z\x () 3 (76) 1 () Z\x (64) 3 (76) 1 () 3 (76) 1 () 3Z\x (89) ZZ\zn (17) DIA. HOLES (4) kv Rating Nom. Max BIL Amps, Max Leakage Distance to Ground Minimum, Inches (mm) 15Z\x (394) 4 (610) 37 (940) (Complete Mounting Incl. Live Parts and End Fittings, less Connectors)1 Cypoxy Station Post Station Post 193R3-Ed 193R3d 1933R3-Ed 1933R3d 1934R3-Ed 1934R3d 1 All SMD-0 Mountings are equipped with attachment hook to accommodate Loadbuster. Connectors must be specified, refer to the table on page 13. Dimensions in Inches (mm) A 1 A B M 1 M R 1 R Station Post Cypoxy 1B\, (549) C\v (654) 9Z\, (740) 17 (43) 0C\, (518) Z\, (56) 10 (4) 14 (356) 18 (457) 39Z\x (1003) 46C\, (1178) 54Z\, (1375) 35Z\v (895) 41Z\x (1054) 51Z\, (199) 30B\, (778) 34C\v (883) Z\, (968) 17B\, (448) 0C\, (518) 4 (610) Net Wt., Lbs. (Kg.) 50 (3) 60 () 7 (33) Station Post 64 (9) 87 (39) (50) d For provisions only for NEMA pad-terminal connectors or two-hole compression connectors, add suffix -G to catalog number. S&C Specification Bulletin

22 SMD-40 Power Fuse Station Vertical Style Dimensions in inches (mm) 8M\, () 7 (178) 1Z\x () (51) 7C\zn (183) Optional attachment hook for use with Loadbuster (catalog number suffix -LB ) 3Z\, (79) >\zn (14) DIA. HOLES ON 10 () CENTERS (18 per side) >\zn (14) 3 1>\zn (40) SLOTS ON 0 (51) CENTERS 1M\, (48) 6Z\x (165) (51) Z\x (13) 5Z\v (133) >\zn (14) DIA. HOLES 1C\v (44) 4C\, (111) BASE DETAIL TERMINAL PAD DETAIL (TOP AND BOTTOM) HINGE DETAIL kv Nom. Max Rating BIL Amps, Max E 400E 9 400E Leakage Distance to Ground, Minimum, Inches (mm) 15Z\x (394) 15Z\x (394) 4 (610) (Complete Mounting incl. Live Parts and End Fittings, less Connectors)13 Cypoxy Station Post 1930d Station Post 1930-SP 1B\,f (31) 13B\,f (346) SP 1B\, (31) SP 16B\, (4) Dimensions in Inches (mm) A 1 A B C F L M R 13B\, (346) 17B\, (448) 10f (4) 10 (4) 14 (356) (686) 9 (737) 33 (8) 19Z\v (489) C\v (578) 6Z\v (667) (635) 36C\,f (94) 1C\,f (543) (686) 31 (787) C\v (984) 45Z\, (1146) 1C\, (543) C\, (645) Number of Slots per Side Net Weight, Lbs. (Kg.) Cypoxy Station Post 65 (9) 70 (3) 85 (39) Station Post 73 (33) 85 (39) (50) 1 For available connector arrangements, refer to the table on page 13. SMD-40 Live Parts are not available separately. 3 To specify optional Loadbuster Tool attachment hook, add suffix LB to catalog number; e.g., 1930-LB. d Mounting includes -kv -kv BIL Cypoxy station post insulators. f These dimensions are for mountings with -kv BIL Cypoxy station post insulators. Deduct Z\x inches (64 mm) for mountings furnished with 95-kV BIL porcelain station post insulators; i.e., 1930-SP. Leakage distance to ground is 10Z\x inches (67 mm) for mounting with porcelain station post insulators. S&C Specification Bulletin 4-31

23 SM-4h Power Fuse Disconnect, 180 Opening, Vertical Style Dimensions in inches (mm) 1Z\x () 8M\, () 7 (178) (51) >\zn (14) (51) >\zn (14) DIA. HOLES >\zn (14) DIA. HOLES ON 10 () CENTERS 1C\v (44) 5Z\, (130) >\zn (14) 3 1>\zn (40) SLOTS 1C\v (44) 3Z\x (89) 1Z\x () 1Z\v (3) DIA. Z\x (13) 13 TAPPED HOLES (TWO EACH SIDE) 3M\, (98) BASE DETAIL TO END OF HOLDER IN 180 OPEN POSITION h SM-4 Mountings in the Disconnect 180 Opening Vertical Style can be equipped with attachment hook to accommodate Loadbuster. Specify by add ing suffix -LB to catalog number of mounting. Rating Dimensions in Inches (mm) Net Weight, Lbs. (Kg.) kv Mounting1 Cypoxy Amps, Cypoxy Station Station Max Station Holder3 A 1 A B C F M 1 M R X Holder Nom. Max BIL Station Post Post Post Post R1-Ej R R1-E 19050R R1-E R R1-E R C\, (314) 1C\, (314) 16C\, (416) 16C\, (416) 0C\, (518) 13Z\x (343) 13Z\x (343) 17Z\x (445) 17Z\x (445) 1Z\x (546) 1 Mounting includes live parts, less holder. For live parts furnished separately, refer to the table on page 16. For available connectors, refer to the table on page Holder does not carry snuffler or silencer. f Mounting includes -kv, -kv BIL Cypoxy station post insulators. 10 (4) 10 (4) 14 (356) 4 (610) 8 (711) 3 (813) 1Z\x (318) 16Z\x (419) 0C\v (5) 30C\, (77) 34C\, (873) 15Z\x (394) 0C\v (5) 19Z\x (495) 0C\v (5) 4B\, (1083) (603) 3C\v 4C\v (69) 5C\v (146) 5C\v (146) 5B\, (143) 50 (3) 56 () 7 (33) 57 (6) 70 (3) 99 (45) 105 (48) 18 (58) M\, 31 (356) (1016) (711) (167) (787) 4C\v (69) 6 (15) M\, 31 (458) (1016) (711) (1368) (787) 8C\v (730) 6 (15) 90 (41) Mounting includes -kv BIL Cypoxy station post insulators. 8.0 (3.6) 9.0 (4.1) 10.3 (4.6) 14.3 (6.5) 14.3 (6.5) Deduct inches (51 mm) from dimension of mountings equipped with porcelain station post insulators. Add Z\x inch (13 mm) to dimension of mountings equipped with porcelain station post insulators. S&C Specification Bulletin

24 SM-5 Power Fuse Disconnect, 180 Opening, Vertical Style Dimensions in inches (mm) 1Z\x () 8M\, () 7 (178) (51) >\zn (14) (51) >\zn (14) DIA. HOLES >\zn (14) DIA. HOLES ON 10 () CENTERS 1C\v (44) 5Z\x (140) >\zn (14) 3 1>\zn (40) SLOTS 1C\v (44) 5ZC\zn (148) 1Z\x () 1Z\v (3) DIA. Z\x (13) 13 TAPPED HOLES (TWO EACH SIDE) 4M\, (14) BASE DETAIL TO END OF HOLDER IN 180 OPEN POSITION Rating Dimensions in Inches (mm) Net Weight, Lbs. (Kg.) kv Mounting1 Cypoxy Amps, Cypoxy Station Station Max Station Holder3 A 1 A B C F M 1 M R X Holder Nom. Max BIL Station Post Post Post Post 13Z\x (343) E R-Ej R 86151R 1C\, (314) 400E 19060R-E 19060R 8615R (314) 1C\, R-E R 86153R (416) 16C\, R (416) 16C\, R-E R 86154R (518) 0C\, 1 Mounting includes live parts, less holder. For live parts furnished separately, refer to the table on page 16. For available connectors, refer to the table on page Holder does not carry snuffler or silencer. 13Z\x (343) 17Z\x (445) 17Z\x (445) 1Z\x (546) 10 (4) 10 (4) 14 (356) 4 (610) 8 (711) 3 (813) (356) (1016) (458) (1016) 1Z\x (318) 16Z\x (419) 0C\v (5) 8 (711) 8 (711) 33B\, (854) 37B\, (956) 19B\, (498) 1C\v (55) 3B\, (600) 45M\, (1165) (708) M\, 53Z\, (1349) (89) 35Z\, 57Z\, (1451) (89) 35Z\, 1C\v (55) C\v (654) C\v (654) 9C\v (756) 5C\v (146) 5C\v (146) 5B\, (143) 6 (15) 6 (15) 54 (4) 60 () 76 (34) 94 (43) 61 (8) 74 (34) 103 (47) 109 (49) 13 (60) 1.0 (9.5) 3.3 (10.5).8 (11.7) 31.8 () 31.8 () f Mounting includes -kv, -kv BIL Cypoxy station post insulators. Deduct inches (51 mm) from dimension of mountings equipped with porcelain station post insulators. 4 S&C Specification Bulletin 4-31

25 SM-5 Power Fuse Disconnect, 180 Opening Vertical Style Dimensions in inches (mm) 1Z\x () 8M\, () 7 (178) >\zn (14) DIA. HOLES ON 10 () CENTERS 5C\v (146) >\zn (14) DIA. HOLES B\, (16) 6 (15) (51) 3 (76) 1C\v (44) >\zn (14) 3 1>\zn (40) SLOTS 1Z\x () 1Z\v (3) DIA. 10 (4) 10 (4) >\zn (14) DIA. HOLES 11Z\, (83) 3 (76) B\, (16) Rating Dimensions in Inches (mm) Net Weight, Lbs. (Kg.) kv Mounting1 Cypoxy Amps, Cypoxy Station Station Max Station Holder3 A B C F M 1 M R Holder Nom. Max BIL Station Post Post Post Post E 70E R3-Ef R Ra 19056R3-E 19056R3 8615Ra 1Z\x (318) 1Z\x (318) 1 Mounting includes live parts, less holder. For live parts furnished separately, refer to the table on page 16. For available connectors, refer to the table on page Holder does not carry snuffler or silencer. 10 (4) 10 (4) 4 (610) 8 (711) 1Z\x (318) 16Z\x (419) 34 (864) (965) 0Z\v (514) 4Z\v (616) C\, (568) C\, (568) 84 () 90 (41) 91 (41) 104 (47) 1.0 (9.5) 3.3 (10.5) f Mounting includes -kv, -kv BIL Cypoxy station post insulators. a Two holders required with each mounting. Deduct Z\x inches (64 mm) from dimension of mountings equipped with porcelain station post insulators. S&C Specification Bulletin 4-31

26 SM-5 Power Fuse Disconnect, 90 Opening, Inverted Style Dimensions in inches (mm) 1Z\x () 1Z\x () 7 8M\, () (178) 1Z\v (3) DIA. >\zn (14) 3 1>\zn (40) SLOTS >\zn (14) DIA. HOLES ON 10 () CENTERS 1C\v (44) 1C\v (44) >\zn (14) (51) 3C\v (95) Z\x (13) 13 TAPPED HOLES (TWO EACH SIDE) 3Z\v (83) 5Z\, (130) >\zn (14) DIA. HOLES Rating Dimensions in Inches (mm) Net Weight, Lbs. (Kg.) kv Mounting1 Cypoxy Amps, Cypoxy Station Station Holder3 A Max Station 1 A B C F M R X Holder Nom. Max BIL Station Post Post Post Post E R-Ef R 86191R 1C\, (314) 400E 19080R-E 19080R 8619R 1C\, (314) R-E R 86193R 16C\, (416) R 16C\, (416) R-E R 86194R 0C\, (518) 1 Mounting includes live parts, less holder. For live parts furnished separately, refer to the table on page 16. For available connectors, refer to the table on page Holder does not carry snuffler or silencer. 13Z\x (343) 13Z\x (343) 17Z\x (445) 17Z\x (445) 1Z\x (546) 10 (4) 10 (4) 14 (356) 14 (356) 18 (458) 4 (610) 8 (711) 3 (813) 40 (1016) 40 (1016) 1Z\x (318) 16Z\x (419) 0C\v (5) 8 (711) 8 (711) 39C\, (1000) 0M\, (530) 43C\, () 51B\, (1311) 6M\, (1597) 6M\, (1597) 0M\, (530) 4M\, (63) 4M\, (63) 8M\, (733) 5C\v (146) 5C\v (146) 5B\, (143) 6 (15) 6 (15) 53 (4) 59 () 75 (34) 93 (4) 60 () 73 (33) 10 (46) 108 (49) 131 (59) 3.5 (10.7).8 (11.7) 8.3 (1.8) 34.3 (15.5) 34.3 (15.5) f Mounting includes -kv, -kv BIL Cypoxy station post insulators. Deduct inches (51 mm) from dimension of mountings equipped with porcelain station post insulators. 6 S&C Specification Bulletin 4-31

27

28 Printed in U.S.A.