System Specifications

Transcription

1 System s Environmental s, page 1 Switch Dimensions, page 1 Switch and Module Weights and Quantities, page 2 Transceiver and Cable s, page 2 Switch Power Input Requirements, page 2 Power s, page 3 Power Cord s, page 5 Environmental s Environment Temperature Ambient operating temperature 32 to 104 F (0 to 40 C) Ambient nonoperating 40 to 158 F ( 40 to 70 C) Relative humidity Ambient (noncondensing) 5 to 95% Altitude Operating 0 to 13,123 feet (0 to 4,000 meters) Switch Dimensions Switch Width Depth Height Cisco Nexus 93128TX 17.5 inches (44.5 cm) 22.5 inches (57.1 cm) 5.3 inches (13.3 cm) (3 RU) 1

2 Switch and Module Weights and Quantities System s Switch and Module Weights and Quantities Component Cisco Nexus 93128TX Chassis (N9K-C93128TX) Uplink Module M4PC-CFP2 M6PQ and M6PQ-E M12PQ Fan Modules Port-side intake (burgundy) (N9K-C9300-FAN2) Port-side exhaust (blue) (N9K-C9300-FAN2-B) Power Supply Module 1200-W HVAC/HVDC dual-direction (white) (N9K-PUV-1200W) 930-W DC port-side intake (green) (UCSC-PSU-930WDC) 930-W DC port-side exhaust (gray) (UCS-PSU-6332-DC) Weight per Unit lb (14.8 kg) 3.4 lb (1.5 kg) 2.0 lb (0.9 kg) 3.12 lb (1.4 kg) 1.14 lb (0.5 kg) 1.14 lb (0.5 kg) 2.42 lb (1.1 kg) 2.42 lb (1.1 kg) 2.42 lb (1.1 kg) Quantity (2 for operations and 1 for redundancy) 2 (1 for operations and one for redundancy) Transceiver and Cable s To determine which transceivers, adapters, and cables are supported by this switch, see c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html. To see the transceiver specifications and installation information, see Switch Power Input Requirements The following table lists the typical amount of power consumed by the switch, and it lists the maximum amount of power that you must provision from the power source as input to the power supply and switch for peak conditions. Note Some power supplies might have UL listed capabilities that are greater than the maximum power requirements for a switch. To determine the power consumption characteristics for the switch, use the typical and maximum requirements listed in the following table. 2

3 System s Power s Switch Cisco Nexus 93128TX Typical Power Consumption (AC or DC) 582 W Maximum Power Consumption (AC or DC) 853 W Power s Power specifications include the specifications for each type of power supply module W HVAC/HVDC Power Supply s These specifications apply to the 1200-W HVAC/HVDC (N9K-PUV-1200W) power supplies. Input voltage AC (for 830 W output) AC (for 1230 W output) DC (for 1230 W output) Nominal (Range) 115 VAC ( VAC) 230 or 277 VAC ( VAC) 240 or 380 VDC ( VDC) AC input frequency Maximum inrush current Maximum output Watts For VAC For VAC For VDC Nominal: 50 to 60 Hz (Range: Hz) 35 A (cold turn on); 70 A (hot turn on) Per power supply 830 W 1230 W 1230 W Power supply output voltage For VAC For VAC For VDC Per power supply 12 VAC at 67 A 12 VAC at 100 A at 100 A Power supply standby voltage Efficiency rating Form factor 12 V at 2.5 A Climate Savers Platinum Efficiency (80Plus Platinum certified) RSP1 3

4 930-W DC Power Supply (Port-Side Intake) s System s 930-W DC Power Supply (Port-Side Intake) s These specifications apply to the 930-W DC (UCSC-PSU-930WDC) port-side intake power supplies. DC input voltage range Maximum DC input current Maximum input W Maximum output power per power supply Maximum inrush current Maximum hold-up time Power supply output voltage Power supply standby voltage Efficiency rating Form factor Nominal range: -48 to -60 VDC nominal (Range: -40 to -60 VDC 23 A at -48 VDC 1104 W 930 W 35 A (sub-cycle duration) 8 ms at 930 W Greater than 92% at 50% load RSP1 930-W DC Power Supply (Port-Side Exhaust) s These specifications apply to the 930-W DC (UCS-PSU-6332-DC) power supplies. Maximum DC input current Maximum input W Maximum output power per power supply Maximum inrush current Maximum hold-up time Power supply output voltage 23 A at -48 VDC 1104 W 930 W 35 A at +35 Celcius 8 ms at 50 % load 4

5 System s Power Cord s Power supply standby voltage Efficiency rating Form factor Climate Savers Platinum Efficiency (80Plus Platinum certified) 1U Power Cord s The following tables specify the power cables that you should order and use with HVAC/HVDC and DC power supplies. Table 1: Power Cable s for HVAC/HVDC Power Supplies Power Type HVAC HVAC HVAC HVDC Power Cord Part Number CAB-HVAC-SD-0.6M CAB-HVAC-C14-2M CAB-HVAC-RT-0.6M CAB-HVDC-3T-2M Cord Set Description 2-foot (0.6 m) cable with Saf-D-Grid and SD connectors 6.6-foot (2.0 m) cable with Saf-D-Grid and C14 connector (use for up to 240 V) 2-foot (0.6 m) cable with Saf-D-Grid and RT connector 6.6-foot (2.0 m) cable with Saf-D-Grid and three terminal connectors Table 2: Power Cable s for DC Power Supplies Power Supply UCSC-PSU-930WDC (port-side intake airflow) UCS-PSU-6332-DC (port-side exhaust airflow) Power Cord (customer supplied) CAB-48DC-40A-8AWG Cord Set Description 8 AWG insulated cable (10 AWG minimum) for each power supply 8-AWG cable with 3-pin keyed power supply connector and three wires (power source connection) 5

6 Power Cord s System s 6