SPEED-xWDM... Lightwaves ahead!

Transcription

1 SPEED-xWDM... Lightwaves ahead! OPTICAL HIGH-SPEED NETWORKS

2 SPEED-xWDM of Pan Dacom Direkt Fiber optic capacities can be elegantly and cost-efficiently multiplied by using WDM technology. Few years ago, expensive WDM optic and complex installations processes complicated a really commercial use of WDM systems for regional or even local fiber optic connections. The SPEED-xWDM series enables the profitable use of added value from WDM technology, even in economically marginal budgeted networks. The SPEED-xWDM series grows flexibly with the requirements of a network from simple n x E1 system up to redundant multi Gigabit nodes. Thus, Pan Dacom has especially considered regional and campus-like network infrastructures with varied interfaces for its product development in addition to the classic WDM applications. Capacity extension of optical networks in point-to-point applications Previously Afterwards Gigabit Location B Gigabit Location B 1310nm Fiber Optic Multiplexer Fiber Optic Multiplexer Singlemode Gigabit Gigabit n x Fibre Channel n x Fibre Channel Video production studio SDI / DVB ASI CWDM SDI / DVB ASI Recording studio u Exploitation of existing fiber optics u Plug & Play u Any applications from 100Mbps up to 2.7Gbps u Transparent data transmission Cost-efficient alternative to SDH upgrade with high scalability Previously Afterwards Gigabit Location C Location B u New, but scalable transmission capacities u Retention of an existing SDH ring u Uninterruptible migration Gigabit Gigabit u Parallel transmission of e.g. IP, SDH, or video Copyright 2008, Pan Dacom Direkt GmbH All rights reserved

3 and WDM will definitely pay off! backup fail-safe interconnection of data centers (Fibre Channel) Backup link switch-over time < 50 ms (Ficon) u Ideal for backups u Short time to switch-over (<50ms) for SDH applications Working link CWDM u Configurable characteristics to switch-over u Manual shifting of individual wavelengths for network maintenance Location B Optical network backhaul for competitive DSL networks Central office Core mit Location C 1 Gbps 1 Gbps IP-DSLAM Location B 1 Gbps 1570 nm 1550 nm 1530 nm 1510 nm CWDM Location D 1 Gbps IP-DSLAM IP-DSLAM IP-DSLAM u Entirely passive WDM solution without any additional source of error u Ideal for competitive network backhaul Quality Made in Germany In order to meet the high quality expectations of our customers, all SPEED-Carrier systems and their rack mount cards are exclusively developed and produced in Germany. u Protection through the use of intelligent network components u Wavelength adaptation directly in the SFP-based network units As an ISO 9001 certified company, we are proud of the superior product quality of our SPEED-products.

4 SPEED-xWDM... starting small High-speed 2.7Gbps SFP ports for up to two applications (e.g. 2 x STM16) Fail-safe Protection switching on 2.7Gbps SFP ports (optional) Low-speed 1Gbps SFP slots for up to two applications (e.g. 2 x GigE) Reliability Redundant 230 V or 48 V power supply Compact 1U enclosure only - for highest port density Flexible One module slot for passive multiplexer (4- or 5-channel CWDM) or additional transponder card for two additional active channels (up to 2.7 Gbps) Monitoring Relay contact for signaling major alarms in third-party systems Management u Integrated NMS aggregation switch with 4 x Fast for SNMP and Web-NMS u Remote in-band NMS using a CWDM uplink u NMS of third-party units can be connected via the residual Fast ports

5 SPEED-xWDM... growing big Integrated data bus system Three independent bus systems at the backplane provide high-speed communication (2Mbps up to 1Gbps) among individual module slots Flexible power supply u Redundant and fail-safe: 230 V AC, 48 V DC or 24 V DC available in two power classes (70W or 150W) u Suitable for redundant mixed operation (230V/48V/24V) u Suitable for stand-by and load-sharing operation Structured cabling u Bended and special secured (option) power plugs for rugged power supply u Cable clip for optimized patch cable duct NMS aggregation u Integrated NMS aggregation switch with 4 x Fast for SNMP and Web-NMS u Remote in-band NMS using a CWDM uplink u NMS of third-party units can be connected via the residual Fast ports Web-NMS Unique packing density u Support of more than 90Gbps - in only 4.5U u No need for aeration space u 17 module slots for high- and lowspeed rack mount cards u Minimum space required due to 19" installation depth of 23.5cm Hot Swap & Front Access u Front access for easy installation and hot-pluggable hardware extension u All system cards are hot-swappable and suitable for local change without affecting data traffic Intelligent cooling system In stand-by mode, integrated temperature sensors locate heat sources and systematically cool them by using individually assessable and redundant fans. This feature extends the life time substantially and ensures a long-lasting and uninterruptible cooling..

6 SPEED-WDM 21 2-channel WDM, optimal for parallel transmission of two applications u Covers one slot in the u Wavelengths: 1310 nm / 1550 nm (wideband) 51 and or 9-channel CWDM, extremely compact for parallel transmission of up to nine applications u Covers 1 or 2 slots in the u 51: Wideband 1310 nm (1271 nm 1451 nm) and 1510, 1531, 1551 and 1571 nm u 91: Four additional channels 1471, 1491, 1591 and 1611 nm 41E and 81E 4- or 8-channel CWDM extension, optimal for capacity enhancement of 2-channel WDM or 5 / 9-channel CWDM installations by additional four or eight channels u Covers 1 or 2 slots in the u Wavelengths: 1311, 1331, 1351 and 1451 nm, (1271, 1291, 1371, 1431 nm for CWDM 81E only) SPEED-DWDM 81 8-channel DWDM aggregation, ideally used as a pre-concentration of up to 8 applications using a single CWDM wavelength u Covers 2 slots in the u Wavelengths: Available on request SPEED-ADWDM 18 1-channel add/drop CWDM, minimum attenuation loss through extraction of a single wavelength only u Covers 1 slot in the u Wavelengths: Available on request

7 SPEED-DUALLINE SFP 3R Extremely compact transponder card for up to two separate C/DWDM applications with optical protection and 3R repeater function u 4 SFP ports (30Mbps 2.7Gbps) u 3R signal processing up to 2.7Gbps u Protocol transparent (IP, SDH, storage, ATM, ) u Configurable <50ms protection switching (manual, automatic) SPEED-SINGLELINE SFP / SPEED-DUALLINE SFP Cost-effective transponder card, suitable for one or two C/DWDM applications or for a single optical conversion application u 2 or 4 SFP ports (30Mbps 2.7Gbps) u Protocol transparent (IP, SDH, storage, ATM, ) u Can also be used as a stand-alone converter (e.g. Multimode - Singlemode) SPEED-DUALMUX SFP 2.5 Intelligent aggregator card for wavelength saving transmission of two Gigabit or Gigabit Fibre Channel using a 2.5Gbps (STM-16) wavelength u Flexible 2.5Gbps SFP uplink u Two SFP client ports for Gigabit or Gigabit Fibre Channel u Suitable for Singlemode, Multimode, 1000BaseT or xwdm SFPs Q3/Q SPEED-SINGLELINE XFP 3R Exceptionally compact 10 Gigabit transponder card for wavelength conversion and 3R signal processing u 2 XFP ports (10Gbps) u 3R up to 10Gbps u Protocol transparent (IP, SDH, storage, ) u Multiplexer transponder card (8 x 1Gbps) is projeted Q Pluggables Electrical interface for SPEED transponder cards (MSA standard) Flexible line optic for Singlemode/Multimode/ Single fiber/xwdm Flexible and easy-to-replace optical modules for all SPEED transponder cards u Easy-to-remove - but still flexible for other network components u Diverse wavelengths for Single-/Multimode or C/DWDM systems u Electrical interfaces for Fast, Gigabit and STM-1

8 Did you know that in addition to the 4.5U, further system platforms are available? 1U u 4 module slots for SPEED transponder cards u 230 V AC or 48 V DC power supply (optional redundant) u Mixed operation (230V/48V) u Front access u Everything available in - only 1U SPEED-SINGLESLOT HOUSING u Suitable for single stand-alone applications u 1 module slot for SPEED transponder cards u 230 V AC using an external power supply that a versatile CWDM solution is available for the installation in splice and cable sleeves using the SPEED-KAMUMU? SPEED-KAMUMU (cable muffle multiplexer) u Purely passive even suitable for environments where the installation of active multiplexer technology is not permitted u Extended temperature range for outdoor applications u Compact and flexible DIN-rail mounting kit for splice cassette u Strain-relieved fiber optic protection that the SPEED-NMS management card with the integrated SFP-based switch can also be used to aggregate in-band remote management of third-party systems? Central office Remote location 10/100 BaseTX IP-DSLAM 10/100 BaseTX NOC 10/100 BaseTX IP-router CWDM 4.5U U 51

9 References Customer: Bayerischer Rundfunk, broadcasting station headquartered in Munich Project: Redundant ring connection of the production studios Feimann and Unterhöfing and the broadcasting studios. Broadcasting-specific applications such as audio and video transmissions and low-speed command lines have been integrated, in addition to such company-wide PBX and IT services as Gigabit, ATM and Fibre Channel. The Bayerischer Rundfunk uses all 16 CWDM wavelengths in order to efficiently utilize the network capacity with the aggregated payload of 16 x 2Gbps. An extension of additional channels is possible at any time with the C-/DWDM hybrid concept, by installating DWDM and 10Gigabit components. Video Broadcasting studios ATM Kupferdop Eine Glasf Glasfaserp IP 4.5U Studio Freimann 20 km dark fiber (Fiber optic link) 25 km dark fiber (Fiber optic link) Studio Unterföhring Location C ATM IP Video 4.5U 8 km dark fiber (Fiber optic link) 4.5U ATM Video IP Customer: UniCredit Banka of Slovenija d.d., an internationally operating bank with its headquarter in Ljubljana. Project: Redundant connection of two data centers with multipurpose applications (Gigabit, 2G Fibre Channel and E1) using an existing fiber optic link. Customer statement: The aim was to use a cost-effective and easy-to-manage solution in order to connect both data centers by reducing link costs. We decided to install the Pan Dacom Direkt solution, due to its compact design, easy-to use platform and low cost structure. Gigabit Gigabit Gigabit 2 Gigabit Fibre Channel Backup link (6 km) 2 Gigabit Fibre Channel Gigabit n x E1 Working link (5 km) n x E1 Data center A CWDM Data center B

10 Pan Dacom Direkt GmbH Dreieich Plaza 1 B Dreieich Tel. : +49 (0) 1805/ * Fax. : +49 (0) 1805/ * *0,14 EUR/Min info@pandacomdirekt.de As a versatile, internationally active telecommunication supplier and manufacturer, Pan Dacom Direkt provides longterm know-how to cater for complex demands in the IT field. Considerable expertise is required, not only to plan network infrastructures, but also to facilitate an understanding of how relevant systems and access components interact with one another. These are the challenges currently confronting telecommunication companies. For many years, Pan Dacom Direkt has delivered and installed self-developed system solutions, consisting of optical and electrical multiplexers, repeaters and converters. In addition, we provide network management platforms for operation in the major communication infrastructures of national and international key accounts. As an ISO 9001 certified company, the development and production of our active SPEED systems take place exclusively in Germany. We are one of only a few companies to so do, and as a result, our products meet the highest quality standards associated with Made in Germany. Pan Dacom Direkt has also focused successfully on the customized development of niche solutions and adaptation of existing systems. In addition to our self-developed SPEED product series, Pan Dacom Direkt offers a multitude of complementary systems from innovative manufacturers. Our customers can focus on their core business activities according to our slogan one stop one source. As your technology partner, we take care of technical solutions and complex product integration. Just test us!