PB3010 family. Fanless Box PCs with Intel Ivy Bridge platform 3 rd generation of Core i processors and double digital video output

Transcription

1 PB3010 family Fanless Box PCs with Intel Ivy Bridge platform 3 rd generation of Core i processors and double digital video output

2 PB Highlights Fanless Box PC (0 50 C operating temperature) ASEM STANDARDS compliants Intel Ivy Bridge platform (3 rd generation Core i platform) Celeron 1047UE 1,4 GHz, 2 cores 2 threads - 2MB Smart Cache 17W Celeron 1020E 2,2 GHz, 2 cores 2 threads - 2MB Smart Cache 35W Core i3 3120ME 2,4 GHz, 2 cores 4 threads - 3 MB Smart Cache 35W Core i5 3610ME 2,7 GHz, 2 cores 4 threads - 3 MB Smart Cache 35W Core i7 3612QE 2,1 GHz, 4 cores 8 threads - 6 MB Smart Cache 35W RAM System memory expandable up to 16GB Doppia uscita video separata 1 x DVI-I e 1 x DVI-D PCI/PCIe x4 espansion slot (S1 version) Supports Win Xp, Win 7, Win 8 and Linux operating systems Fast mass storage devices msata SSD with SATA II and 2,5 HDD/SSD with SATA III interface 24V DC power supply with galvanic isolation and optionally UPS with external battery pack Kit for ATX mode power supply functionality 2

3 PB3010 PB3000 comparison Same configurations of PB3000 systems Added Double video output independent 1 x DVI-I (DVI-D or VGA with adapter) 1 x DVI-D Not available Direct VGA output Two MiniPCI slots PS/2 connector 3

4 PB Long term availability 4

5 PB ASEM Standards Isolated Power supply with galvanic isolation to prevent: Common mode noise at low/medium frequencies on the power supply line Ground loop noise Extra-voltage caused by lightning and to guarantee Power supply with grounded positive terminal (e.g. Japan) UPS integrated in the internal power pack With external battery pack - rear of the system mounting With external battery pack - standalone wall mounting 5

6 PB3010 Technical features vs PB3000 PB3010 PB3000 VIDEO CONTROLLER CHIPSET VIDEO CONTROLLER Intel Celeron 1047E, 1.40GHz, 2 cores / 2 threads, 2MB Smart cache, 17W, 22nm technology Intel Celeron 1020E, 2.20GHz, 2 cores / 2 threads, 2MB Smart cache, 35W, 22nm technology Intel Core i3-3120me, 2.40GHz, 2 cores / 4 threads, 3MB Smart cache, 35W, 22nm technology Intel Core i5-3610me, 2.70GHz (3.3GHz Turbo), 2 cores / 4 threads, 3MB Smart cache, 35W, 22nm technology Intel Core i7-3612qe, 2.1GHz (3.1GHz Turbo), 4 cores / 8 threads, 6MB Smart cache, 35W, 22nm technology Intel HM76 Express Chipset Intel HD Graphics, 650MHz integrated in Celeron microprocessor Intel HD Graphics 4000, 650MHz integrated in Core microprocessor VIDEO OUTPUT SYSTEM MEMORY RAM 1 x DVI-I (Single Link, DVI-D or VGA with adapter) 1 x DVI-D (Single Link) 2GB / 4GB / 8GB / 16GB 1 x DVI-I (Single Link) or 1 x VGA MASS STORAGE 1 bootable CFast SATA 2 3Gb/s embedded on board with external access 1 x SSD 2,5" or 1 x HDD 2,5" SATA 3 6Gb/s 1 x SSD msata SATA 2 3Gb/s PS/2-1 x PS/2 Keyboard & Mouse LAN 3 x LAN 10/100/1000Mbps (2 x Intel 82574L, 1 x Intel 82579) USB 2 x USB x USB 2.0 SERIAL ADD-ON INTERFACES (optional max 1) 1 x RS232 (DB9M) 2 x RS232 (DB9M) 2 x USB x RS232/422/485 (DB15M)+ 1 x USB x RS232/422/485 (DB15M) optoisolated + 1 x USB x LAN 10/100/1000Mbps, Intel 82574L Unmanaged Ethernet Switch 4 x 10/100/1000Mbps EXPANSION SLOTS S0-2 x MiniPCI dedicated to ASEM fieldbuses, I/O and NVRAM boards S1 1 x PCI or 1 x PCIe x4 (5 Gb/s) 2 x MiniPCI dedicated to ASEM fieldbuses, I/O and NVRAM boards 1 x PCI or 1 x PCIe x4 (5 Gb/s) POWER SUPPLY UNIT OPERATING TEMPERATURE 24VDC isolated UPS (optional) with external battery module ATX Mode push button (optional) 0-50 C; 0-45 C with HDD 24x7; 5-45 C with standard HDD 6

7 PB Motherboard 1152, top Intel processor Back-up battery msata SATA II Power supply module RAM SODIMM DDR module sockets CFast SATA III for 2,5 SSD/HDD Add-on I/Fs connector PCI/PCIe riser card connector 1 x DVI-I 2 x USB x LAN 10/100/ x USB 3.0 DVI-D 1 x RS232 DB9M 7

8 PB Interfaces & rear connectors S0 S1 8

9 PB Processors Intel Ivy Bridge platform (3 rd generation Core i processors) Ultra low voltage processors Celeron 1047UE 1,4 GHz, dual core - two threads - 2MB Smart Cache - 17W Celeron 1020E 2,2 GHz, dual core - two threads - 2MB Smart Cache - 35W Core i3 3120ME 2,4 GHz, dual core - four threads - 3 MB Smart Cache - 35W Core i3 3610ME 2,7 GHz, dual core - four threads - 3 MB Smart Cache - 35W Core i7 3612QE 2,10 GHz, quad core - four threads - 6 MB Smart Cache - 35W 22nm process technology L2 Cache 2/3/6 MB Fast memory support - DDR3 1333MHz RAM Low power consumption - 17W/35W TDP HM76 Companion Chip Intel Rapid Storage Technology With one or multiple hard drives 9

10 PB Integrated UPS (option) UPS integrated in the internal power supply unit With external battery pack - rear of the system mounting With external battery pack - standalone wall mounting UPS features 12V DC UPS battery backup system Input voltage intervention threshold 18V DC 5' nominal duration time at 25 C, full charge, 10A load (estimated value) 15W max consumption during battery charge* External battery pack 2500mAh 12V/6A max lead battery (Pb) Full charge in 5 hours Lifetime 10y at 25 C, full charge Software Management Tools Smart battery management to extend lifetime Battery estimated duration for individual system configuration *Consumption [W] during battery charge 15 W Hour

11 PB Mass Storage CFast 1 x bootable CFast SATA II embedded on board with external access CFast card Internal SSD msata 1 x msata SATA II internal connector for direct insertion of msata SSD msata SSD Internal 2,5" SSD/HDD 1 x SATA III connector for: SSD 2,5" with installation kit HDD 2,5" with installation kit (also 24x7) SSD/HDD 2,5" With installation kit ASEM recommends SSD memory due to its industrial reliability and high thermal and vibration shock resistance 11

12 PB3010 Board type and combinations Add-on Configurations/ Slot S0 1 board among: 1 x RS232/422/ x USB 1 x RS232/422/485 opto + 1 x USB 2 x RS232 2 x USB x LAN Gigabit 1 x 4 ports LAN SWITCH PCI / PCIe No slot 1 board among: NETcore X APCI CAN RAW PCI Customer PCI/PCIe x4* S1 * max 3W consumption 12

13 PB ASEM add-on Interfaces (optional) 1 x RS232/422/485 (DB15M) + 1 x USB x USB 2.0 (Type A) 1 x RS232/422/485 optoisolated (DB15M) + 1 x USB x 10/100/1000 Mbps Ethernet (RJ45) 2 x RS232 (DB9M) 4 ports unmanaged Gigabit Ethernet Switch 13

14 PB Fieldbus APCI Boards (optional) NETcore X cards enable the system to interface all popular fieldbus Master or Slave function Available in APCI format Supported Fieldbuses 14

15 ASEM S.p.A. Via Buia Artegna (UD) Italy Tel. +39/ industrialautomation@asem.it