COSVR326 Prepare resources for hard and soft metal roofing and weathering
|
|
|
- Samuel Edwards
- 7 years ago
- Views:
Transcription
1 Prepare resources for hard and soft metal roofing and weathering Overview This standard is about 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components and equipment 4 preparing hard and soft metal roofing and weathering ready for installation COSVR326 1
2 Performance criteria You must be able to: P1 interpret the given information relating to the work and resources to confirm its relevance P2 comply with the given, relevant legislation and official guidance to carry out your work and maintain safe work practices P3 select the required quantity and quality of resources for the methods of work P4 comply with organisational procedures to minimise the risk of damage to the work and surrounding area P5 comply with the given contract information to carry out the work efficiently to the required specification P6 complete the work within the allocated time, in accordance with the programme of work COSVR326 2
3 Knowledge and understanding Performance Criteria 1 Interpretation of information K1 the organisational procedures developed to report and rectify inappropriate information and unsuitable resources, and how they are implemented K2 the types of information, their source and how they are interpreted K3 the organisational procedures to solve problems with the information and why it is important they are followed Performance Criteria 2 Safe work practices K4 the level of understanding operatives must have of information for relevant, current legislation and official guidance and how it is applied K5 how emergencies should be responded to and who should respond K6 the organisational security procedures for tools, equipment and personal belongings K7 what the accident reporting procedures are and who is responsible for making the report K8 why and when personal protective equipment (PPE) should be used Performance Criteria 3 Selection of resources K9 the characteristics, quality, uses, limitations and defects associated with the resources and how defects should be rectified K10 how the resources should be used and how any problems associated with the resources are reported K11 the organisational procedures to select resources, why they have been developed and how they are used K12 the hazards associated with the resources and methods of work and how they are overcome Performance Criteria 4 Minimise the risk of damage K13 how to protect work from damage and the purpose of protection K14 why disposal of waste should be carried out safely and how it is achieved COSVR326 3
4 Performance Criteria 5 Meet the contract specification K15 how methods of work, to meet the specification, are carried out and problems reported K16 how maintenance of tools and equipment is carried out Performance Criteria 6 Allocated time K17 what the programme is for the work to be carried out in the estimated, allocated time and why deadlines should be kept COSVR326 4
5 Additional Information Scope/range related to performance criteria Performance Criteria 1 1 interpretation of drawings, specifications, schedules and manufacturers information related to the work to be carries out Performance Criteria 2 2 safe use of personal protective equipment (PPE) and access equipment/working platforms to carry out the activity, in accordance with legislation and/or organisational requirements 3 safe use and storage of tools and equipment Performance Criteria 3 4 selection of resources associated with own work 4.1 materials, components and fixings 4.2 tools and equipment Performance Criteria 4 5 protection of the work and its surrounding area from damage 6 minimise damage and maintain a clean work space 7 disposal of waste in accordance with legislation Performance Criteria 5 8 demonstration of work skills to measure, mark out, cut and profile 9 use and maintain hand tools, portable power tools and ancillary equipment (appropriate to the metal) 10 preparation for metal roofing and weathering to given working instructions for hard metals or lead Performance Criteria 6 11 completion of own work within the estimated, allocated time to meet the needs of other occupations and/or client COSVR326 5
6 Scope/range related to knowledge and understanding Disposal of waste 1 environmental responsibilities, organisational procedures, manufacturers information, statutory regulations and official guidance Emergencies 2 operative's response to situations in accordance with organisational authorisation and personal skills when involved with 2.1 fires, spillages, injuries Hazards 3 those identified by method of work, manufacturers technical information, statutory regulations and official guidance Information 4 drawings, specifications, schedules, manufacturers' information and regulations governing buildings Legislation and official guidance 5 this relates to the operative's responsibilities regarding potential accidents and health hazards whilst working in the workplace, at height, with tools and equipment, with materials and substances, with movement/storage of materials and by manual handling and mechanical lifting Maintenance 6 operative care of hand tools and/or power tools and ancillary equipment Methods of work 7 application of knowledge for safe work practices, procedures and skills, relating to the method/area of work and materials used, to 7.1 prepare hard metal (cutting to length and profiling edges) 7.2 prepare lead (cutting to length and shape) 7.3 use hand tools, power tools and equipment 7.4 work at height 7.5 use access equipment 8 team work and communication 9 needs of other occupations associated with metal roofing and weathering Personal protective equipment (PPE) 10 occupational use, types, purpose of each type and work situations Problems 11 those arising from information, resources and methods of work 11.1 own authority to rectify 11.2 organisational reporting procedures Programme 12 types of progress charts, timetables and estimated times 13 organisational procedures for reporting circumstances which will affect the work programme COSVR326 6
7 Protect work 14 protect work against damage from general workplace activities, other occupations and adverse weather conditions Resources 15 materials, components and equipment relating to types, quantity, quality and sizes of standard and/or specialist 15.1 hard metal, lead 15.2 hand and/or powered tools and equipment 16 methods of calculating quantity, length, area and wastage associated with the method/procedure to prepare resources for metal roofing and weathering Security procedures 17 site, workplace, company and operative COSVR326 7
8 Developed by ConstructionSkills Version number 1 Date approved March 2005 Indicative review date Validity Status Originating organisation Original URN Relevant occupations Suite Key words July 2015 Current Original ConstructionSkills VR326 Roofers, Roof Tilers and Slaters Roofing Occupations (Construction); Heritage Skills (Construction) Sheet-lead: Roofer; Profiling-edges COSVR326 8
COSVR404 Erect and dismantle plant (cranes and rigs)
Overview This standard is about interpreting information, adopting safe, healthy and environmentally responsible work practices, selecting materials, components, plant, tools and ancillary equipment, preparing
PROMG4 Install mining backup services
Overview This standard is about: 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components and equipment 4 preparing, installing, using and removing below
Unit Title: Unit purpose and aim
Unit Title: Preparing and Operating Telescopic Handlers to Lift and Transfer Loads in the Workplace Level: 2 Credit value: 25 Guided learning hours: 83 Unit expiry date: 31/10/2014 Unit purpose and aim
Unit Title: Unit purpose and aim
Unit Title: Preparing and Operating Sideloader Forklifts to Lift and Transfer Loads in the Workplace Level: 2 Credit value: 16 Guided learning hours: 53 Unit expiry date: 31/10/2014 Unit purpose and aim
Level 2 NVQ Diploma in Trowel Occupations (Construction) (6570-02) May 2014 Version 2.0
QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Trowel Occupations (Construction) (6570-02) May 2014 Version 2.0 Qualification at a glance Subject area City & Guilds number 6570 Age group approved 16-18,19+
ASTFFL6 - SQA Unit Code H54H 04 Prepare for flood damage emergencies
Overview 1 2 3 ASTFFL6 1 Performance criteria P1 P2 P3 confirm that you have the correct tools and equipment for the type of flood emergency you are likely to encounter confirm that you are authorised
SCDHSC0032 Promote health, safety and security in the work setting
Promote health, safety and security in the work setting Overview This standard identifies the requirements when you promote the health, safety and security of yourself and others for whom you are responsible
SKACH11 Hair colour correction services
Overview This standard is about the advanced skills necessary to determine and correct more complex colouring problems. To achieve this standard, you must be able to remove artificial colour, remove bands
SEMFWE232 SQA Unit Code H2BN 04 Cutting plate and sections using shearing machines
Overview This standard identifies the competencies you need for cutting and shaping metal plate and sections (3 mm thickness and above) for fabrications using guillotines and section cropping machines,
ASTFFL1 - SQA Unit Code H54C 04 Respond to requests for fire damage limitation work
Overview This standard is about responding to requests for fire damage limitation work. It includes confirming the details of fire damage limitation jobs, agreeing an initial plan of action and making
Health & Safety Course Descriptions. Health & Safety
Course Descriptions A range of high quality intranet and web deliverable Health and Safety courses, concentrates on making the workplace safer more healthy. The courseware is aimed at all levels of staff
CFAMLE6 Ensure health and safety requirements are met in your area of responsibility
Ensure health and safety requirements are met in your area of Overview This unit is concerned with managing the overall health and safety process in your area of. It is intended to go beyond meeting health
EUSNCO309 (SQA Unit Code - FA9F 04) Monitor the installation process for Network Construction Operations
Monitor the installation process for Network Construction Operations Overview This unit is designed for the candidate to demonstrate the effectiveness of the installation and construction process by monitoring
SEMPEO1-35 - SQA Unit Code H034 04 Applying heat treatment to engineering materials
Overview This standard covers a range of basic competences that you need, to apply specified heat treatment processes to engineering materials/components. It will prepare you for entry into the engineering
ASTCCR2 - SQA Unit Code H548 04 Carry out and complete clean-room cleaning operations
Carry out and complete clean-room cleaning Overview 1 Carry out clean-room 2 Remove and store equipment, tools and materials after clean-room 3 Remove and dispose of contaminated material after clean-room
Safety Systems Review Facilities Management Guidance and specification Version 1 2014
Safety Systems Review Facilities Management Guidance and specification Version 1 2014 Membership Training Qualifications Audit and Consultancy Policy and Opinion Awards Contents Page Safety Systems Review
OCCUPATIONAL HEALTH AND SAFETY Global Policy
OCCUPATIONAL HEALTH AND SAFETY Global Policy Each of us should behave in a manner that promotes a positive safety culture Our commitment Diageo is firmly committed to ensuring the occupational health,
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 2 and 3 NVQ Certificate in Rail Engineering Traction and Rolling Stock (7597-05/10) September 2011 Version 1.1 (September 2011) Qualification at a glance Subject area Rail
Health and Safety Policy and Guidance for Personal Protective Equipment
Health and Safety Policy and Guidance for Personal Protective Equipment Document Reference: H&S No.5/03 This document includes a statement of Policy of Glasgow Caledonian University together with summary
SFJCCAD2 Promote business continuity management
Overview This unit is about providing advice and assistance on business continuity management, including general advice for the business and voluntary sectors, and specific advice and assistance to individual
Risk Management Guidelines
Reporting Bodily Injury Claims Introduction Despite all your best efforts incidents resulting in injury and disease may occur to people due to your business activities. Prompt investigation and reporting
Level 2 NVQ Diploma in Maintenance Operations (Construction) (6562-02) July 2013 Version 2.0
QUALIFICATION LOGBOOK Level 2 NVQ Diploma in Maintenance Operations (Construction) (6562-02) July 2013 Version 2.0 Candidate Logbook/Work-Based Evidence Record Mandatory Units About City & Guilds As the
SEMPEO2-54 - SQA Unit Code FP47 04 Carrying out heat treatment of engineering materials
Overview This standard covers a broad range of basic competences that you need, to apply specified heat treatment processes to engineering materials/components. It will prepare you for entry into the engineering
32 PROMOTE, MONITOR AND MAINTAIN HEALTH, SAFETY AND SECURITY IN THE WORKING ENVIRONMENT
Unit overview Elements of competence 32a 32b 32c Monitor and maintain the safety and security of the working environment Promote health and safety in the working environment Minimise risks arising from
COGMWT2 - SQA Unit Code D7SD 04 Perform post-job (mechanical wireline) operations
Overview This unit is about performing post-job operations. You will be involved in activities such as: 1 rigging down mechanical wireline equipment 2 demobilising and storing mechanical wireline equipment
Contractor s Safe Working Agreement
Contractor s Safe Working Agreement This statement provides details on how I/we, the Trade Contractor will manage the health and safety hazards associated with my/our work. ASSESSING WORKPLACE HEALTH AND
ASTRAZENECA GLOBAL POLICY SAFETY, HEALTH AND ENVIRONMENT (SHE)
ASTRAZENECA GLOBAL POLICY SAFETY, HEALTH AND ENVIRONMENT (SHE) THIS POLICY SETS OUT HOW WE WILL MEET OUR COMMITMENT TO OPERATING OUR BUSINESS IN A WAY THAT PROTECTS PERSONAL HEALTH, WELLBEING AND SAFETY
SKAC222 (SQA Unit Code - DD38 04) Carry out basic glazing and carpentry repairs
Overview This unit is about carrying out basic repairs to windows, doors and carrying out other carpentry repairs. Manual and power operated tools are used. The purpose of the repair could be to: 1. repair
1. 2. Health, safety and. Unit 1: Principles of personal responsibilities and how to develop and evaluate own performance at work
1. 2 security Health, safety and procedures All employers and employees have a responsibility to adhere to the legislation that affects them, such as: health and safety legislation, which may relate to
Slips, Trips and Falls Policy. Documentation Control
Documentation Control Reference HS/SP/015 Date approved 23 Approving body Directors Group Implementation date 23 Supersedes Version 2 (March 2010) Consultation undertaken Trust Health and Safety Committee
SFJPE1.3 Evaluate the effectiveness of the operational delivery business process
Evaluate the effectiveness of the operational delivery business process Overview This standard concerns evaluating the effectiveness of new and adapted business processes. The scope of work needs to address
Lifting Equipment - Work equipment for lifting or lowering loads and includes its attachments used for anchoring, fixing or supporting it.
LIFTING EQUIPMENT POLICY Background and Legislation The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) apply in all premises and work situations subject to the Health and Safety at Work,
SFJFRSFF2 SQA Unit Code (FA6J 04) Take responsibility for effective performance in fire and rescue
Overview The standard is recommended for firefighters, control room staff, and others with a remit for community safety within fire and. This standard is about making a positive contribution to the work
Health & Safety Policy For Locations Hosting Film Production Companies
Health & Safety Policy For Locations Hosting Film Production Companies Throughout this document, the location will be referred to as The Venue and the film production company as The Contractor. The following
SKAGH23 (SQA Unit Code F7AP 04) Provide creative hair extension services
Overview This unit is about the skills required to provide a full hair extension service to clients. It includes preparing and creatively selecting, blending and placing hair extensions to add length,
CPCPMS3017A Install and test split system air conditioning
CPCPMS3017A Install and test split system air conditioning Release: 1 CPCPMS3017A Install and test split system air conditioning Modification History Not Applicable Unit Descriptor Unit descriptor This
Health and Safety Policy
Health and Safety Policy Status: Final Next Review Date: Apr 2014 Page 1 of 16 NHS England Health and Safety: Policy & Corporate Procedures Health and Safety Policy Policy & Corporate Procedures Issue
Pollution Incident Response Plan
Pollution Incident Response Plan Introduction Schmidt Quarries is committed to ensuring all aspects of our quarrying activities comply with the environmental legislative requirements in NSW. This Pollution
AURV471482A Plan and manage compliance with environmental regulations in the body repair industry
AURV471482A Plan and manage compliance with environmental regulations in the body repair industry Release: 1 AURV471482A Plan and manage compliance with environmental regulations in the body repair industry
SEMME3012 Installing marine lighting, alarm, detection and monitoring equipment and systems
Installing marine lighting, alarm, detection and monitoring equipment and Overview This standard identifies the competences you need to install marine lighting, alarm, detection and monitoring, in accordance
OH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable)
OH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable) 4.1 General Requirements 4.2 OHS policy Has the organisation an established and maintained
BRO Roles & Responsibilities Form Page 1 of 9
BRO Roles & Responsibilities Form Page 1 of 9 This document must identify the (s) and/or the person delegated to undertake the duties listed below. These duties are required by legislation and/or Council
Release: 1. CPCCWP3004A Apply waterproofing remedial processes
Release: 1 CPCCWP3004A Apply waterproofing remedial processes CPCCWP3004A Apply waterproofing remedial processes Modification History Not Applicable Unit Descriptor Unit descriptor This unit of competency
SFS SYS 13 (SQA Unit Code - H4GR 04) Maintain the performance of electronic security systems
Maintain the performance of electronic security systems Overview This NOS sets out the skills, knowledge and understanding for you to maintain the operational performance of electronic security systems,
Hazard Identification, Risk Assessment And Control Procedure
Hazard Identification, Risk Assessment And Control Procedure 1. Purpose 1.1 To ensure that there is a formal process for hazard identification, risk assessment and control to effectively manage hazards
THE UNIVERSITY OF SHEFFIELD WORK AT HEIGHT POLICY
THE UNIVERSITY OF SHEFFIELD WORK AT HEIGHT POLICY CONTENTS Page No 1 INTRODUCTION 2 2 LEGISLATION 2 3 HIERARCHY OF CONTROL 2 4 WORK AT HEIGHT POLICY 3 5 ROLES AND RESPONSIBILITIES 3 6 RISK ASSESSMENTS
FPICOT2221A Trim and cross cut felled trees
FPICOT2221A Trim and cross cut felled trees Release: 1 FPICOT2221A Trim and cross cut felled trees Modification History Not applicable. Unit Descriptor This unit specifies the outcomes required to trim
Cleaning and Support Services / Cleaning Services Supervision National Occupational Standards
Cleaning and Support Services / Cleaning Services Supervision National Occupational Standards Contents C1 02 Maintain Personal Hygiene Standards when Cleaning... 3 C1 03 Do your job in a customer friendly
Health and safety policy
1. General statement of intent The Company recognises and accepts its responsibilities as an employer to ensure, so far as is reasonably practicable, the health, safety and welfare of its employees and
Excavation & Trenching Procedure
Excavation & Trenching 1. Overview The will ensure, as far as is reasonably practicable, that the conduct of work relating to excavation and trenching will not be harmful to the health and safety of employees
Health and Safety Policy Part 1 Policy and organisation
Health and Safety Policy Part 1 Policy and organisation ICO H&S Policy Policy and organisation, June 2014 Page 1 of 6 1. Scope 1.1 The Health and Safety policy applies to all employees of the Information
Level 2 NVQ in Refrigeration and Air Conditioning
Level 2 NVQ in Refrigeration and Air Conditioning Small Commercial Refrigeration and Air Conditioning Systems (6087-02) National occupational standards units (Assessment and evidence requirements) www.cityandguilds.com
Risk management a practical approach
Risk management a practical approach Introduction Preventing work related accidents and injuries is the primary concern for all those involved in health and safety. Work related accidents and injuries
School or service safety advisor (SSA) role
School or service safety advisor (SSA) role Document control information Published document name: ssa-role-gn Date issued: January 2012 Version: 1.0 School or service safety advisor (SSA) role Previous
SFJ ZI02 Monitor and review the performance of technical support systems and equipment
Monitor and review the performance of technical support systems and Overview This unit covers monitoring and reviewing the performance of systems and i.e. common and complex audio, video and communication
1.1 Make sure the client s clothing is protected throughout the service. 1.3 Keep the work area clean and tidy throughout the service
Unit 4040 Colour Hair using a Variety of Techniques Learning Outcome Assessment Criteria 1. Be able to maintain safe and effective 1 methods of working when colouring and lightening hair 1.1 Make sure
CONSTRUCTION HEALTH AND SAFETY, AND INJURY PREVENTION Research and develop accident and incident investigation procedures on construction sites
1 of 7 level: 4 credit: 4 planned review date: December 2003 sub-field: purpose: Construction People credited with this unit standard are able to: research accident and/or incident investigation and reporting
DEMOLITION Develop hazard management plans for the demolition of complex structures
1 of 6 level: 4 credit: 8 planned review date: November 2005 sub-field: purpose: entry information: accreditation option: moderation option: Civil Works and Services People credited with this unit standard
Contact Centre. National Occupational Standards May 2011
Contact Centre National Occupational Standards May 2011 Skills CFA 6 Graphite Square, Vauxhall Walk, London SE11 5EE T: 0207 0919620 F: 0207 0917340 Info@skillscfa.org www.skillscfa.org 2012 Skills CFA
WORKPLACE HEALTH AND SAFETY AUDITING GUIDELINES
WHS UNIT WORKPLACE HEALTH AND SAFETY AUDITING GUIDELINES Contents 1 Purpose... 1 2 Scope... 1 3 Definitions... 1 4 Responsibilities... 1 4.1 WHS Unit... 1 4.2 Auditor(s)... 1 4.3 Managers of Faculties
Guidance to Prevent Slips, Trips & Falls
Guidance to Prevent Slips, Trips & Falls Published June 2005 CONTENTS 1. Scope of this guidance 2. New plant/ installations 3. Maintenance 4. Housekeeping 1. Scope of this guidance Slips, trips and falls
A Safe and Healthy Workplace
Section 1 A Safe and Healthy Workplace Why is Health and Safety Important? Health and Safety is the subject of many laws and regulations, failure to comply with the law renders companies and individuals
University of Wisconsin-Stout. Occupational Safety & Health Plan. Overview
University of Wisconsin-Stout Occupational Safety & Health Plan Overview Wisconsin Statutes 101.055 and Wisconsin Administrative Code (Comm 32.11) require all public employers to develop and implement
Approved Contractor Application (SAFE Form B)
Approved Contractor Application (SAFE Form B) 1. Business Information Company Name: Postal Address: Physical Address: (If differs from Postal) Phone: Mobile: Email Address: Number of Employees: 2. Key
CPCPFS4005A Commission fire alarm and detection systems
CPCPFS4005A Commission fire alarm and detection systems Release: 1 CPCPFS4005A Commission fire alarm and detection systems Modification History Not Applicable Unit Descriptor Unit descriptor This unit
POLICY Contents. 1.0 Introduction Statement
POLICY Contents 1.0 Introduction Statement 2.0 Legal Responsibility 2.1 Asbestos Management Hierarchy 2.2 Duty Holders Responsibility 2.3 Employees Responsibility 3.0 Asbestos Management Procedure 4.0
OSHA Compliance Checklist ASC
OSHA Compliance Checklist ASC Date Inspectors Facility OSHA is the agency responsible for establishing and enforcing standards that will make the workplace safe and healthful for the employees. The way
Tremline Pty Ltd trading as The Hills Bark Blower
JSA No: Rev: 10011 Date: 10010 ABN 1 07 880 6 Website: wwwbarkblowercomau Job Number Start Time: Vehicle : Max Length Hose Date: Company Name: Product: Quantities Depth Job site address: Description of
Kettlewell House Residential Home
McDonald Taylor Limited T/as SJH Consulting Residential Home Kettlewell Hill Cobham Woking Surrey GU21 4HX Kate Patterson Residential Care Home Kettlewell Hill Cobham Woking Surrey GU21 4HX 11 th May 2015
POLICY ON OCCUPATIONAL HEALTH AND SAFETY RISK MANAGEMENT
THE NORTHCOTT SOCIETY POLICY ON OCCUPATIONAL HEALTH AND SAFETY RISK MANAGEMENT VOLUME: 2 Policy on Management and Organisational Issues SECTION: B Occupational Health & Safety & Workers Compensation SUB-SECTION:
Elements of Occupational Safety. Introduction. Policy Development
Introduction If you are a factory owner or manager, you cannot simply look at safety and health problems on an ad hoc basis and hope that the conditions in your workplace comply with national and international
POLICY ON HEALTH AND SAFETY (GENERAL)
POLICY ON HEALTH AND SAFETY (GENERAL) General Statement It is the policy of Serenity Homecare Limited to ensure, so far as is reasonably practicable, the health, safety and welfare of its employees and
The Management of Asbestos containing Materials
The Management of Asbestos containing Materials Status Owner Approval by University Court Draft Head of Estates and Building 1 Purpose... 1 2 Scope... 3 3 Principles... 4 4 Procedure... 5 5 Accountabilities...
Unit FFL 1 Respond to requests for fire damage limitation work
Unit FFL 1 Respond to requests for fire damage limitation work FFL 1.1 FFL 1.2 FFL 1.3 FFL 1.4 Get and confirm details and specific information related to fire damage limitation jobs Agree initial plan
ANNEX 2 Emergency / Pollution Incident Response Plan
ANNEX 2 Emergency / Pollution Incident Response Plan Volume 5 of 5 Appendix 21.1 Annex 2 EPIRP Page 1 of 9 1 WIND FARM CONSTRUCTION ENVIRONMENTAL EMERGENCY / POLLUTION RESPONSE PLAN... 3 1.1 Policy...
QUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 2 Certificate and Diploma in Light Vehicle Maintenance & Repair Principles (4290-12/17) March 2011 Version 2.3 (September 2011) Qualification at a glance Subject area City
SFJ EFSM14 Manage the performance of teams and individuals to achieve objectives
Manage the performance of teams and individuals to achieve objectives Overview This standard is about making the best use of your team and its members so that they can achieve your organisation's objectives.
Level 3 Diploma in Hospitality Supervision and Leadership (NVQ) (7250) Logbook
Level 3 Diploma in Hospitality Supervision and Leadership (NVQ) (7250) Logbook www.cityandguilds.com December 2009 Version 1.6 2 About the qualification 2.2 The structure of the Level 3 Diploma in Hospitality
The Royal Environmental Health Institute of Scotland
The Royal Environmental Health Institute of Scotland Introduction to Health and Safety Course Syllabus Minimum teaching time 3 hours The Royal Environmental Health Institute of Scotland is a registered
1. GENERAL STATEMENT OF COMPANY HEALTH, SAFETY AND ENVIRONMENTAL POLICY
1. GENERAL STATEMENT OF COMPANY HEALTH, SAFETY AND ENVIRONMENTAL POLICY Dumfries Timber Co. Ltd. is committed to comply with our legal duties in order to provide a safe and healthy working environment
WORKPLACE REHABILITATION & RETURN TO WORK QUEENSLAND
WORKPLACE REHABILITATION & RETURN TO WORK QUEENSLAND POLICY STATEMENT Kelly Services is committed to the prevention of work-related injuries and illnesses by providing a safe working environment through
DORSET & WILTSHIRE FIRE AND RESCUE AUTHORITY Performance, Risk and Business Continuity Management Policy
Part Two Part One Not Protectively Marked DORSET & WILTSHIRE FIRE AND RESCUE AUTHORITY Performance, Risk and Business Continuity Management Policy. The Dorset & Wiltshire Fire and Rescue Authority (DWFRA)
workplace management
workplace management protecting your business SAFETY. is our number one priority Our number one focus is to protect your staff and premises by providing the very best Health & Safety solutions and the
Occupational Health & Safety Policy Injury & Incident Reporting
Occupational Health & Safety Policy Injury & Incident Reporting Policy number 46 Version 1 Approved by board on 6 June 2014 Responsible person President Review date June 2016 Introduction Living Positive
The main outcomes of this standard are:
Overview This standard is about individuals working on a freelance basis or in a context where they are expected to generate business within the active leisure industry, therefore requiring more than just
WASTE MANAGEMENT POLICY
WASTE MANAGEMENT POLICY Policy and Management Procedures for the disposal of clinical/healthcare and household/domestic waste Co-ordinator: Property & Environment Manager Reviewer: Healthcare Waste Committee
HEALTH & SAFETY POLICY
HEALTH & SAFETY POLICY Last Updated: November 2014 Finance & General Purposes Committee: November 2014 Corporation Approval: December 2014 Review Date: November 2016 HEALTH AND SAFETY POLICY 1. Policy
COSCSMO10 - SQA Unit Code FM1W 04 Implement strategic sourcing partnerships
Overview This Unit is about identifying and agreeing with the stakeholders what systems are most effective for managing the project. The systems identified will need to be prioritised and formalised if
University of Leicester Sports and Recreation Service. Statement on Safety in University Sports Facilities
University of Leicester Sports and Recreation Service Statement on Safety in University Sports Facilities Introduction The Sport and Recreation Service is an independent service within the University.
The New Zealand Human Services Quality Framework - ISO9002:2008 to 2012
HUMAN SERVICES QUALITY FRAMEWORK STANDARDS - POLICIES DOCUMENT Q:/1 DATE REVEIWED: REFERENCE: GOVERNANCE AND August 2014 MANAGEMENT POLICY AUTHORISATION: STANDARD REFERENCE: NEXT REVIEW DATE: Management
Occupational Health and Safety in the Laboratory (Undergraduate Students)
Occupational Health and Safety in the Laboratory (Undergraduate Students) Introduction and scope of the Guidelines These guidelines have been written for all laboratory practical classes at the University
Construction and Civil Work Management
STANDARD LME-12:001901 Uen Rev A Contents 1 Introduction... 3 2 Definitions... 3 3 Requirements... 4 3.1 General... 4 3.2 Responsibilities... 4 3.3 OHS Safety Plan... 5 3.4 Start of Construction Phase...
Benchmark OHS Consulting Pty Ltd Self Assessment WHS Audit Tool
Benchmark OHS Consulting Pty Ltd Self Assessment WHS Audit Tool This WHS Auditing System Tool is to be used as a self-assessment of YOUR COMPANY compliance with AS 4801 and the Work Health and Safety Act
Corporate Health and Safety Policy
Corporate Health, Safety & Wellbeing Service Corporate Health and Safety Policy Contents 1. Introduction... 2 2. Policy Statement... 2 3. Scope... 3 4. Definition of Manager... 4 5. Responsibilities...
AFTRS Health and Safety Risk Management Policy
AFTRS Health and Safety Risk Management Policy Responsible Officer Contact Officer Authorisation Director, Corporate and Student Services Head of Human Resources Chief Executive Officer Effective Date
Emergency Planning and Business Continuity Policy
Nottingham University Academy of Science and Technology Emergency Planning and Business Continuity Policy Responsible officer: Vice Principal Curriculum & Quality Date approved: 15/07/2014 Review date:
PRSSM419A Install networked security system
PRSSM419A Unit descriptor Employability skills Application of the unit Unit sector ELEMENT Elements describe the essential outcomes of a unit of competency. 1 Prepare for installation. Install networked
Department of Education and Lifelong Learning / Education Establishments
Department of Education and Lifelong Learning / Education Establishments Policy and Procedures for the Reporting of Incidents of Violence, Injuries, Diseases and Dangerous Occurrences November 2002 FOREWORD
OCCUPATIONAL HEALTH AND SAFETY POLICY: INCIDENT AND INJURY REPORTING ERJ 6.28.1
OCCUPATIONAL HEALTH AND SAFETY POLICY: INCIDENT AND INJURY REPORTING ERJ 6281 INTRODUCTION The Edmund Rice Justice Aotearoa New Zealand Trust recognises that the health and safety of its employees is a
COGSCIM3_04 - SQA Unit Code F7WL 04 Analysing and inputting biomanufacturing data in a Manufacturing Information Management System
Analysing and inputting biomanufacturing data in a Manufacturing Overview This unit covers the competences you need to access, register and input batch/product data in a Manufacturing (MIMS), in accordance