Energy Efficiency Business Rebates Lighting Catalog

Transcription

1 Energy Efficiency Business Rebates Lighting Catalog LIGHTING PRODUCTS Solution Product Code Product Description Units $/Unit Page # New Fixture wattage from 193 to 244 $35.00 Compact Fluorescent Fixtures Exterior Compact Fluorescent Fixtures Interior Induction Fixtures Exterior Induction Fixtures Interior Linear Fluorescent Fixtures Interior High Bay LED Fixture New Fixture wattage from 245 to 360 $ New Fixture wattage from 129 to 192 $ New Fixture wattage from 71 to 128 $ New Fixture wattage less than or equal to 70 watt $ New Fixture less than or equal to 70 watt $ New Fixture wattage from 181 to 250 $ New Fixture wattage from 251 to 360 $ New Fixture wattage from 121 to 180 $ New Fixture wattage from 71 to 120 $ New Fixture wattage less than or equal to 70 watt $ New Fixture wattage from 181 to 250 $ New Fixture wattage from 121 to 180 $ New Fixture wattage from 101 to 120 $ New Fixture wattage from 71 to 100 $15.00 Fixture New Fixture wattage less than or equal to 70 watt $ New Fixture wattage from 361 to 600 $ New Fixture wattage from 193 to 244 $ New Fixture wattage from 245 to 360 $ New Fixture wattage from 129 to 192 $ New Fixture wattage from 65 to 128 $ New Fixture wattage less than or equal to 64 watt $ High Bay LED: 40 to 131 watts $ High Bay LED: >131 to 160 watts $ High Bay LED: >160 to 187 watts $ High Bay LED: >187 to 220 watts $ High Bay LED: >220 to 262 watts $ High Bay LED: >262 to 280 watts $ High Bay LED: >280 to 320 watts $ High Bay LED: >320 to 500 watts $ High Bay LED: > 500 to 750 watts $ San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 1

2 Solution Product Code LED: 22 to 39 watts Product Description Units $/Unit Page # $25.00 Interior LED Fixture Exterior LED Fixtures (Street and Area Lighting) LED: 40 to 131 watts $ LED: >131 to 160 watts $ LED: >160 to 220 watts $30.00 Fixture New Fixture wattage from 193 to 350 $ New Fixture wattage from 131 to 192 $ New Fixture wattage from 111 to 130 $ New Fixture wattage from 81 to 110 $ Accent or Directional Lighting New Fixture wattage less than or equal to 80 $ Downlight 5 watts Downlight 6 watts Downlight 7 watts Downlight 8 watts Downlight 9 watts Downlight 10 watts Downlight 11 watts Downlight 12 watts Downlight 13 watts Downlight 14 watts Downlight 15 watts Downlight 16 watts Downlight 17 watts Downlight 18 watts Downlight 19 watts Downlight 20 watts Downlight 21 watts Downlight 22 watts Downlight 23 watts Downlight 24 watts Fixture $ San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 2

3 Solution Accent or Directional Lighting LED Display Case Lighting (Non-Refrigerated) Product Code Product Description Units $/Unit Page # Downlight 25 watts New Linear LED Strip (T8 base case) New Linear LED Strip (T12 base case) New Linear LED Strip (Bi-pin Halogen base case) Fixture $ Linear Foot $ New Premium 5' Case Door $ LED Refrigerator or Freezer Case Lighting New Standard 5' Case Door $45.00 Door New Premium 6' Case Door $ New Standard 6' Case Door $ Foot T8 Linear Fluorescent Lamps with Electronic Ballasts New T8 Lamp and Electronic Ballast - 8 Foot Lamp $ Low or Reduced Wattage (T8) T8 32 watt to 4 Foot 25 watt Lamp $ T8 32 watt to 4 Foot 28 watt Lamp $ LED Integral MR 16 Lamp - 2 watt LED Integral MR 16 Lamp - 3 watt LED Integral MR 16 Lamp - 4 watt $5.00 LED Lamps MR LED Integral MR 16 Lamp - 5 watt LED Integral MR 16 Lamp - 6 watt LED Integral MR 16 Lamp - 7 watt LED Integral MR 16 Lamp - 8 watt Lamp LED Integral MR 16 Lamp - 9 watt LED Integral MR 16 Lamp - 10 watt $ LED Integral MR 16 Lamp - 11 watt LED Integral MR 16 Lamp - 12 watt LED Screw-in PAR20-7 watt LED Lamps Screw-in PAR20 LED Lamps Screw-in PAR LED Screw-in PAR20-8 watt LED Screw-in PAR20-9 watt LED Screw-in PAR20-10 watt LED Screw-in PAR20-11 watt LED Screw-in PAR20-12 watt LED Screw-in PAR20-13 watt LED Screw-in PAR20-14 watt LED Screw-in PAR30-11 watt LED Screw-in PAR30-12 watt LED Screw-in PAR30-13 watt Lamp $12.50 Lamp $ San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 3

4 Solution Product Code LED Screw-in PAR30-14 watt LED Screw-in PAR30-15 watt Product Description Units $/Unit Page # $ LED Screw-in PAR30-16 watt LED Lamps Screw-in PAR LED Screw-in PAR30-17 watt LED Screw-in PAR30-18 watt LED Screw-in PAR30-19 watt Lamp $ LED Screw-in PAR30-20 watt LED Screw-in PAR30-21 watt LED Screw-in PAR38-13 watt LED Screw-in PAR38-14 watt LED Screw-in PAR38-15 watt $ LED Screw-in PAR38-16 watt LED Screw-in PAR38-17 watt LED Lamps Screw-in PAR LED Screw-in PAR38-18 watt LED Screw-in PAR38-19 watt LED Screw-in PAR38-20 watt Lamp LED Screw-in PAR38-21 watt $ LED Screw-in PAR38-22 watt LED Screw-in PAR38-23 watt 18 LED Lamps Screw-in Globe LED Lamps Candelabra LED Screw-in PAR38-24 watt LED Screw-in PAR38-25 watt LED Screw-in Globe - 1 watt LED Screw-in Globe - 2 watt LED Screw-in Globe - 3 watt LED Screw-in Globe - 4 watt LED Screw-in Globe - 5 watt LED Screw-in Globe - 6 watt LED Screw-in Globe - 7 watt LED Screw-in Globe - 8 watt LED Screw-in Globe - 9 watt LED Screw-in Globe - 10 watt LED Screw-in Globe - 11 watt LED Screw-in Globe - 12 watt LED Candelabra - 2 watt LED Candelabra - 3 watt LED Candelabra - 4 watt LED Candelabra - 5 watt Lamp $5.00 Lamp $ San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 4

5 Solution LED Lamps Candelabra Product Code LED Candelabra - 6 watt LED Candelabra - 7 watt Product Description Units $/Unit Page # Lamp $ LED Screw-in A-lamp - 6 watt LED Screw-in A-lamp - 7 watt LED Screw-in A-lamp - 8 watt $ LED Screw-in A-lamp - 9 watt LED Screw-in A-lamp - 10 watt LED Screw-in A-lamp - 11 watt LED Screw-in A-lamp - 12 watt LED Screw-in A-lamp - 13 watt LED Screw-in A-lamp - 14 watt LED Screw-in A-lamp - 15 watt LED Screw-in A-lamp - 16 watt LED Lamps Screw-in A-lamp LED Screw-in A-lamp - 17 watt LED Screw-in A-lamp - 18 watt LED Screw-in A-lamp - 19 watt Lamp LED Screw-in A-lamp - 20 watt LED Screw-in A-lamp - 21 watt $ LED Screw-in A-lamp - 22 watt LED Screw-in A-lamp - 23 watt LED Screw-in A-lamp - 24 watt LED Screw-in A-lamp - 25 watt LED Screw-in A-lamp - 26 watt LED Screw-in A-lamp - 27 watt LED Screw-in A-lamp - 28 watt LED Screw-in A-lamp - 29 watt LED Screw-in A-lamp - 30 watt LED Sport Lighting Exterior LED Sports & Athletic Field Lighting Fixtures Watt $ San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 5

6 GENERAL REQUIREMENTS Customer must have a San Diego Gas & Electric (SDG&E ) commercial electric account Carefully read the specifications and definitions to determine whether you are installing a qualifying product(s) All equipment must be installed and operational before a rebate application is submitted All new lighting fixture(s), retrofit kits, and components must carry the appropriate, designated Underwriters Laboratory (UL) or Intertek s Electrical Testing Labs (ETL) Listed Mark, and must be Restriction of Hazardous Substances Directive (RoHS) compliant In all cases, the wattage of the replacement lighting equipment must be less than the wattage of the existing lighting equipment All installations must be new replacements or retrofits and are based on a one-for-one replacement; except where otherwise noted It is the responsibility of the customer to ensure the equipment to be installed adheres to all state, local and national building codes and ordinances, as well as the manufacturer s requirements Customers are responsible for determining whether retrofit will maintain adequate light levels All fixtures must be hardwired Rebates are paid on lowest wattage installed Include ballast and lamp model number on invoice when ballast and lamp specification requirements are listed in terms and conditions Must submit the manufacturer s specification sheet to each application documenting the characteristics of lamps, ballasts, and fixtures CFL is now an allowable baseline equipment type for LED surface, pendant, track, and recessed downlights Adapters that convert LED lamp sockets from one base type to another are not allowed (e.g. GU24 pin base to E26 screw base) Several products offered through the Energy Efficiency Business Rebates program are provided at no cost or at a discount for qualified customers through SDG&E s Business Energy Solutions program. Customers with a monthly electrical demand less than 200 kw may participate and should visit sdge.com/bes or call our Energy Savings Center at for details San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 6

7 DEFINITIONS Building Space** Is 1) A complete single story building 2) A complete floor of a multifloor building 3) The entire space in a building of a single tenant under a single lease or 4) All of the common, not leasable space in single building. Candelabra Base A smaller screw-in base for light bulbs with a 12 millimeter diameter, referred also as an E12 base. Edison Base The most common screw-in base for light bulbs with a 26 millimeter diameter, referred also as an E26 (or medium) base. Enclosed Space** Space that is substantially surrounded by solid surfaces, including walls, ceilings or roofs, doors, fenestration areas, and floors or ground. ETL Listed Mark A product bearing the ETL Listed Mark has been tested to be in compliance with applicable electric, gas and other safety standards. For more information, visit Garage A parking garage is a covered building or structure for the purpose of parking vehicles, which consists of at least a roof over the parking area enclosed with walls on all sides. Parking garages may have fences, rails, partial walls (pony wall), or other barriers in place of one or more walls. The structure has an entrance(s) and exit(s). If the roof of the parking structure is also used for parking, the section without an overhead roof is considered a parking lot instead of a parking garage. Hardscape Area** Hardscape Area of a site shall include parking lot(s), roadway(s), driveway(s), sidewalk(s), walkway(s), bikeway(s), plaza(s), and other improved area(s) that are illuminated. Incandescent Incandescent includes quartz Tungsten Halogen Lamps. Luminaire** Complete lighting unit consisting of lamp(s) and the parts that distribute the light, position and protect the lamp(s), and connect the lamp(s) to the power supply. NEMA Premium Ballasts The most efficient fluorescent fixed-output and dimmable electronics for T8 ballasts recognized by the National Electronic Manufacturers Association (NEMA). Underwriters Laboratory (UL) An independent product safety certification organization. For more information, visit UL.com. **Defined per 2013 Building Energy Efficiency Standards for Residential and Non Residential Buildings Title 24, Part San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 7

8 Compact Fluorescent Fixture New Fixture -Refers to new equipment being installed based on system (lamp and ballast) wattage Existing Lamp Wattage Refers to the nominal lamp wattage used in the fixture Only complete, new Compact Fluorescent fixtures qualify New fixture must replace an existing fixture that is an Incandescent, Mercury Vapor, Standard Metal Halide, High Pressure Sodium, or Low Pressure Sodium Ballast power Factor (PF) must be greater than or equal to 0.9 Ballast must have a Total Harmonic Distortion (THD) of less than or equal to 20% Additional: For interior fixtures, 2013 Title 24 is triggered, under the Luminaire Alteration rule, if 10% or more of the luminaires in an Enclosed space are affected. For exterior fixtures, 2013 Title 24 is triggered, under the Luminaire Alteration rule, if 10% or more of the luminaires in a Hardscape area are affected. Compact Fluorescent Fixture Table Product Code Existing Fixture Wattage New Fixture Wattage Rebate/Unit Interior 400 watt Fixture Fixture wattage from 193 to 244 $35.00/Fixture Interior 400 watt Fixture Fixture wattage from 245 to 360 $20.00/Fixture Interior 176 to 399 watt Fixture Fixture wattage from 129 to 192 $20.00/Fixture Interior 101 to 175 watt Fixture Fixture wattage from 71 to 128 $20.00/Fixture Interior less than or equal to 100 watt Fixture Fixture wattage less than or equal to 70 $10.00/Fixture Exterior less than or equal to 100 watt Fixture Fixture wattage less than or equal to 70 $10.00/Fixture 2016 San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 8

9 Interior Induction Fixture New Fixture Refers to new equipment being installed based on system (lamp and driver) wattage New fixtures must replace an existing lamp that is either an Incandescent, T12 High Output Fluorescent, T12 Very High Output Fluorescent, Standard Metal Halide, Mercury Vapor, Low Pressure Sodium, or High Pressure Sodium Retrofit kits and replacement of Pulse-Start Metal Halide do NOT qualify Additional: 2013 Title 24 is triggered, under the Luminaire Alteration rule, if 10% or more of the luminaires in an Enclosed Space are affected. Interior Induction Fixture Table Product Code Existing Fixture Wattage New Fixture Wattage Rebate/Unit Interior 400 watt Fixture Fixture wattage from 181 to 250 $45.00/Fixture Interior 400 watt Fixture Fixture wattage from 251 to 360 $25.00/Fixture Interior 176 to 399 watt Fixture Fixture wattage from 121 to 180 $30.00/Fixture Interior 101 to 175 watt Fixture Fixture wattage from 71 to 120 $25.00/Fixture Interior less than or equal to 100 watt Fixture Fixture wattage less than or equal to 70 $12.50/Fixture Exterior Induction Fixture New Fixture Refers to new equipment being installed based on system (lamp and driver) wattage New fixtures must replace an existing lamp that is either an Incandescent, T12 High Output Fluorescent, T12 Very High Output Fluorescent, Standard Metal Halide, Mercury Vapor, Low Pressure Sodium, or High Pressure Sodium Retrofit kits and replacement of Probe-Start Metal Halide do not qualify Additional: 2013 Title 24 is triggered, under the Luminaire Alteration rule, if 10% or more of the luminaires in a Hardscape Area are affected. Exterior Induction Fixture Table Product Code Existing Fixture Wattage New Fixture Wattage Rebate/Unit Exterior 400 watt Fixture Fixture wattage from 181 to 250 $40.00/Fixture Exterior 201 to 399 watt Fixture Fixture wattage from 121 to 180 $25.00/Fixture Exterior 176 to 200 watt Fixture Fixture wattage from 101 to 120 $20.00/Fixture Exterior 101 to 175 watt Fixture Fixture wattage from 71 to 100 $15.00/Fixture Exterior less than or equal to 100 watt Fixture Fixture wattage less than or equal to 70 $15.00/Fixture 2016 San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 9

10 Interior Linear Fluorescent Fixture New Fixture Refers to new equipment being installed based on system (lamp and ballast) wattage Product Catalog Lighting All 4 foot 32 watt T8 lamps must be High Performance T8 or Super T8 lamps All 4 foot T8 ballasts must be NEMA premium or designated high performance electronic ballasts All 4 foot T8 lamps and ballast must be listed on one of the Commercial Lighting Qualifying Product lists at: o Additional: Only complete, new T8, T5 or T5 High Output (HO) Interior Linear Fluorescent fixtures qualify (Excludes retrofit kits) Must replace an existing lamp that is an Incandescent, T12 High Output Fluorescent, T12 Very High Output Fluorescent, Standard Metal Halide, Mercury Vapor, Low Pressure Sodium, or High Pressure Sodium. Replacement of Pulse-Start Metal Halide does not qualify Not eligible for additional rebates under the Compact Fluorescent Fixtures and T8/T5 Linear Fluorescent Lamps with Electronic Ballasts category 2013 Title 24 is triggered, under the Luminaire Alteration rule, if 10% or more of the luminaires in an Enclosed Space are affected. Lamp & Ballast Requirement Table Lamp Type & Size Ballast Type CRI Minimum Rated Lamp Life T8 2ft., 3ft. 4 ft. Programmed Start or Programmed Rapid Start Greater than or equal to 80 24,000 hours T8 All sizes Instant Start Greater than or equal to 80 18,000 hours T5 All sizes Programmed Start or Programmed Rapid Start Greater than or equal to 82 20,000 hours Interior Linear Fluorescent Fixture Table Product Code Existing Fixture Wattage New Fixture Wattage Rebate/Unit Greater than 400 watt Fixture Fixture wattage from 361 to 600 $100.00/Fixture watt Fixture Fixture wattage from 193 to 244 $80.00/Fixture watt Fixture Fixture wattage from 245 to 360 $45.00/Fixture to 399 watt Fixture Fixture wattage from 129 to 192 $50.00/Fixture to 175 watt Fixture Fixture wattage from 65 to 128 $30.00/Fixture Less than or equal to 100 watt Fixture Fixture wattage less than or equal to 64 $15.00/Fixture 2016 San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 10

11 Interior High Bay LED Fixture New Fixture Refers to new equipment being installed based on system (lamp and ballast) wattage Qualifying fixtures must be listed on one of the following lists: Only complete, new LED fixtures or retrofit kits qualify New fixture wattage must be less than existing fixture wattage Must replace an existing Standard Metal Halide, High or Low Pressure Sodium, Mercury Vapor, Incandescent, Fluorescent or Pulse-Start Metal Halide installed in the following applications: o High Bay Luminaires (Fixtures & Retrofit Kits) o Low Bay Luminaires (Fixtures & Retrofit Kits) o High Bay Aisle Luminaries (Fixtures) Additional: 2013 Title 24 is triggered, under the Luminaire Alteration rule, if 10% or more of the luminaires in an Enclosed Space are affected. Product Code o Energy Star: o DLC: o Appendix E: Table of Approved LED Lighting & Utility Approval Process (xls) Recommended Baseline Fixture Wattage Interior High Bay LED Fixture Table Replacement Fixture Wattage Rebate/Unit watts 40 to 131 watts $47.00/Fixture watts >131 to 160 watts $51.00/fixture watts >160 to 187 watts $58.00/fixture watts >187 to 220 watts $68.00/fixture watts >220 to 262 watts $75.00/fixture watts >262 to 280 watts $89.00/fixture watts >280 to 320 watts $105.00/fixture watts >320 to 500 watts $117.00/fixture watts > 500 to 750 watts $141.00/fixture Interior LED Fixture New Fixture Refers to new equipment being installed based on system (lamp and ballast) wattage Qualifying fixtures must be listed on one of the following lists: o Energy Star: o DLC: o Appendix E: Table of Approved LED Lighting & Utility Approval Process (xls) 2016 San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 11

12 Only complete, new LED fixtures and retrofit kits qualify o Retrofit kits must be for troffers or direct/indirect fixtures and need to be hardwired kits with an integrated lens o This measure is intended for the replacement of general interior area lighting, which typically includes 2 x2, 1 x4, and 2 x4 linear fluorescent fixtures. LED replacements for accent, decorative, surface, wall-mounted, pendant, and recessed downlight fixture types are not eligible to receive rebates through this category. LED tubes, LED light bars, and LED strip lights are NOT eligible New fixture wattage must be less than existing fixture wattage Ceiling can fixtures and track lighting do not qualify Replacement of CFLs does not qualify Additional: 2013 Title 24 is triggered, under the Luminaire Alteration rule, if 10% or more of the luminaires in an Enclosed Space are affected. Interior LED Fixture Table Product Code Baseline Fixture Technology Replacement Fixture Wattage Rebate/Unit to 39 watts $25.00/fixture Linear Fluorescent, Metal Halide or 40 to 131 watts $25.00/fixture Halogen 132 to 160 watts $30.00/fixture to 220 watts $30.00/fixture Exterior LED Fixture (Street and Area Lighting) New Fixture Refers to new equipment being installed based on system (lamp and driver) wattage Qualifying fixtures must be listed on one of the following lists and rated for exterior use o Energy Star: o DLC: o Appendix E: Table of Approved LED Lighting & Utility Approval Process (xls) Only complete, new LED fixtures or retrofit kits qualify Must replace an existing Standard Metal Halide, High or Low Pressure Sodium, Mercury Vapor, T12 High Output, T12 Very High Output, or Incandescent lamp Additional: 2013 Title 24 is triggered, under the Luminaire Alteration rule, if 10% or more of the luminaires in a Hardscape Area are affected. Exterior LED Fixture (Street and Area Lighting) Table Product Code New Fixture Wattage Rebate/Unit Fixture wattage from 193 to 350 $125.00/Fixture Fixture wattage from 131 to 192 $125.00/Fixture Fixture wattage from 111 to 130 $80.00/Fixture Fixture wattage from 81 to 110 $80.00/Fixture Fixture less than or equal to 80 $50.00/Fixture 2016 San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 12

13 Accent/Directional Lighting, LED Surface, Pendant and Recessed Down Lighting Qualifying fixtures must be listed on one of the following lists o Energy Star: o DLC: o Appendix E: Table of Approved LED Lighting & Utility Approval Process (xls) Exterior installations must be qualified for exterior use Only complete, new hardwire LED fixtures or retrofit kits qualify Must replace an existing Incandescent, Halogen, or CFL lamp Additional: 2013 Title 24 is triggered, under the Luminaire Alteration rule, if 10% or more of the luminaires in an Enclosed Space are affected. Down Lighting Table Product Code Existing Fixture Wattage New Fixture Wattage Rebate/Unit Downlight 5 watts Downlight 6 watts Downlight 7 watts Downlight 8 watts Downlight 9 watts Downlight 10 watts Downlight 11 watts Downlight 12 watts Downlight 13 watts Downlight 14 watts Fixture less than 100 watt Downlight 15 watts $10.00/Fixture Downlight 16 watts Downlight 17 watts Downlight 18 watts Downlight 19 watts Downlight 20 watts Downlight 21 watts Downlight 22 watts Downlight 23 watts Downlight 24 watts Downlight 25 watts 2016 San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 13

14 LED Display Case Lighting (Non-Refrigerated) Only complete, new Linear LED strips qualify Must replace an existing bi-pin halogen or linear fluorescent lamps A written warranty must be issued to the customer guaranteeing repair or replacement of defective electrical parts (including light source and power supplies) for a minimum of three (3) years from the date of purchase LED tubes do not qualify Power Supply An electronic power supply must be used in the new system Must have a power factor of greater than 0.9 Must experience no more than 20% of total harmonic distortion LED Display Case Lighting (Non-Refrigerated) Table Product Code Existing Lamp New Fixture Rebate/Unit T8 Linear LED Strip $12.00/Linear Foot T12 Linear LED Strip $12.00/Linear Foot Bi-pin Halogen Linear LED Strip $12.00/Linear Foot LED Refrigerator or Freezer Display Case Lighting Qualifying fixtures must be listed on one of the following lists o Energy Star: o DLC: o Appendix E: Table of Approved LED Lighting & Utility Approval Process (xls) Only complete, new Linear LED strips or fixtures qualify LED tubes do not qualify Must replace existing fluorescent lighting LED Refrigerator or Freezer Display Case Lighting Table Product Code Measure Description Light Location End + Light Location Center + Rebate/Unit Premium Tier 5 foot Case Door 19 watt 38 watt $90.00/Door Standard Tier 5 foot Case Door 25 watt 50 watt $45.00/Door Premium Tier 6 foot Case Door 23 watt 46 watt $125.00/Door Standard Tier 6 foot Case Door 30 watt 59 watt $75.00/Door + Maximum power consumption 2016 San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 14

15 8 Foot T8 Linear Fluorescent Lamp with Electronic Ballast A Title 24 permit is required, under the Luminaire Modifications-in-Place rule, if 40 or more luminaires in a Building Space are affected. Lamp Must replace an existing T12 lamp Must meet the Color Rendering Index (CRI) and Minimum Rated Lamp Life standards listed in the table below Lamp and Ballast Requirement Table Ballast Type CRI Minimum Rated Lamp Life (3 Hour/Start) Instant Start Greater than or equal to 80 18,000 Hours Ballast Must be warranted against mechanical or electrical defects for five (5) years Must have a Power Factor (PF) of greater than or equal to 0.9 Must have a Total Harmonic Distortion (THD) of less than or equal to 20% at full light output Replacement lamps and ballasts rebated in this category are not eligible for rebates through the Interior Linear Fluorescent Fixtures category Linear Fluorescent Lamp with Electronic Ballast Table Product Code Description Rebate/Unit foot Lamp $12.00/Lamp 2016 San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 15

16 Low or Reduced-Wattage T8 Lamp (28 & 25 Watt) Rebates are for the installation of 4-ft Low wattage T8 lamps Qualifying lamps must be listed on one of the following lists: Replacement lamps rebated in this category are not eligible for additional rebates through the Interior Linear Fluorescent Fixtures category Low or Reduced-Wattage T8 Lamp (28 and 25 Watt) Table Product Code Description Rebate/Unit T8 32 watt to 4 foot 25 watt Lamp $1.50/Lamp T8 32 watt to 4 foot 28 watt Lamp $1.00/Lamp LED Integral Lamps New LED lamps must not be detachable Qualifying fixtures must be listed on one of the following lists o Energy Star: o DLC: o Appendix E: Table of Approved LED Lighting & Utility Approval Process (xls) LED A-lamps and LED Reflector-lamps must replace existing incandescent, halogen, or compact fluorescent lamps LED MR-16 lamps must replace existing incandescent or halogen lamps New LED lamp wattage must be less than the wattage of the replaced qualifying lamp Adapters that convert lamp sockets from one base type to another are not allowed (e.g. GU24 to E26) New LED lamps must be compatible with existing lighting controls and/or fixture components Replacement of Compact Fluorescent Lamps (CFL) with LED MR-16 s do not qualify Exterior installations must be qualified for exterior use Additional Details: Rebate based on lamp wattage, not total fixture wattage 2016 San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 16

17 Product Code Lamp Style Allowable Existing Lamp Types LED Integral Lamps Table New Lamp Wattage LED Integral MR 16 Lamp - 2 watt LED Integral MR 16 Lamp - 3 watt LED Integral MR 16 Lamp - 4 watt LED Integral MR 16 Lamp - 5 watt LED Integral MR 16 Lamp - 6 watt MR16 Incandescent or Halogen Only LED Integral MR 16 Lamp - 7 watt LED Integral MR 16 Lamp - 8 watt LED Integral MR 16 Lamp - 9 watt LED Integral MR 16 Lamp - 10 watt LED Integral MR 16 Lamp - 11 watt LED Integral MR 16 Lamp - 12 watt LED Screw-in PAR20-7 watt LED Screw-in PAR20-8 watt LED Screw-in PAR20-9 watt Incandescent, LED Screw-in PAR20-10 watt PAR Halogen, or CFL LED Screw-in PAR20-11 watt LED Screw-in PAR20-12 watt LED Screw-in PAR20-13 watt LED Screw-in PAR20-14 watt LED Screw-in PAR30-11 watt LED Screw-in PAR30-12 watt LED Screw-in PAR30-13 watt LED Screw-in PAR30-14 watt LED Screw-in PAR30-15 watt PAR30 Incandescent, Halogen, or CFL LED Screw-in PAR30-16 watt LED Screw-in PAR30-17 watt LED Screw-in PAR30-18 watt LED Screw-in PAR30-19 watt LED Screw-in PAR30-20 watt LED Screw-in PAR30-21 watt LED Screw-in PAR38-13 watt LED Screw-in PAR38-14 watt LED Screw-in PAR38-15 watt LED Screw-in PAR38-16 watt LED Screw-in PAR38-17 watt LED Screw-in PAR38-18 watt PAR38 Incandescent, Halogen, or CFL LED Screw-in PAR38-19 watt LED Screw-in PAR38-20 watt LED Screw-in PAR38-21 watt LED Screw-in PAR38-22 watt LED Screw-in PAR38-23 watt LED Screw-in PAR38-24 watt LED Screw-in PAR38-25 watt Rebate/Unit $5.00/Lamp $12.50/Lamp $12.50/Lamp $7.50/Lamp $17.50/Lamp $10.00/Lamp $20.00/Lamp 2016 San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 17

18 LED Screw-in Globe - 1 watt LED Screw-in Globe - 2 watt LED Screw-in Globe - 3 watt LED Screw-in Globe - 4 watt LED Screw-in Globe - 5 watt Screw-In Globe Incandescent, Halogen, or CFL LED Screw-in Globe - 6 watt LED Screw-in Globe - 7 watt LED Screw-in Globe - 8 watt LED Screw-in Globe - 9 watt LED Screw-in Globe - 10 watt LED Screw-in Globe - 11 watt LED Screw-in Globe - 12 watt LED Candelabra - 2 watt LED Candelabra - 3 watt Incandescent, LED Candelabra - 4 watt Candelabra Halogen, or CFL LED Candelabra - 5 watt LED Candelabra - 6 watt LED Candelabra - 7 watt LED Screw-in A-lamp - 6 watt LED Screw-in A-lamp - 7 watt LED Screw-in A-lamp - 8 watt LED Screw-in A-lamp - 9 watt LED Screw-in A-lamp - 10 watt LED Screw-in A-lamp - 11 watt LED Screw-in A-lamp - 12 watt LED Screw-in A-lamp - 13 watt LED Screw-in A-lamp - 14 watt LED Screw-in A-lamp - 15 watt LED Screw-in A-lamp - 16 watt LED Screw-in A-lamp - 17 watt Screw-in Incandescent, A-lamp Halogen, or CFL LED Screw-in A-lamp - 18 watt LED Screw-in A-lamp - 19 watt LED Screw-in A-lamp - 20 watt LED Screw-in A-lamp - 21 watt LED Screw-in A-lamp - 22 watt LED Screw-in A-lamp - 23 watt LED Screw-in A-lamp - 24 watt LED Screw-in A-lamp - 25 watt LED Screw-in A-lamp - 26 watt LED Screw-in A-lamp - 27 watt LED Screw-in A-lamp - 28 watt LED Screw-in A-lamp - 29 watt LED Screw-in A-lamp - 30 watt $5.00/Lamp $5.00/Lamp $5.00/Lamp $15.00/Lamp 2016 San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 18

19 LED Sports & Athletic Field Lighting Fixtures The total system wattage of the replacement lighting system must be less than the total wattage of the existing lighting system New fixture refers to new equipment being installed based on fixture (lamp and driver) wattage Qaulifying fixtures must be listed on one of the following lists: o DLC: o Statewide Customized Retrofit Offering Procedures manual for Business Apendix E: Table of Approved LED Lighting & Utility Approval Process(xls) Lumen Maintenance - IES TM shall be used for projecting lumen maintenance o The TM life shall be 30,000 hours minimum New fixtures must replace existing Metal Halide Exterior Sports & Athletic Field Lighting Fixtures greater than 400 watts (including ballast) Exterior installations must be qualified for exterior use Product Code Description Rebate/Unit Exterior LED Fixture (Outdoor Sports and Athletic Field Lighting) $0.20/Watt The selection, purchase, and ownership of goods and services are the sole responsibility of the customer. SDG&E makes no representations as to the safety, reliability, and/or efficiency of goods and services selected. SDG&E makes no warranty, whether express or implied, including warranty of merchantability or fitness for any particular purpose, use or application of selected goods and services. The program is funded by California utility customers and administered by SDG&E under the auspices of the California Public Utilities Commission (CPUC). Program funds will be made on a first- come, first-served basis until program funds are no longer available. This program may be modified or terminated without prior notice. The selection, purchase and ownership of goods and services are the sole responsibility of the customer. The web site links contained herein are provided for information purposes only. SDG&E does not endorse these web sites, or any goods or services of- offered thereon. Particularly, SDG&E has not verified the privacy policies applicable to these web sites, or determined what actions will be taken by third parties regarding the privacy of visitors. In no event shall SDG&E be responsible for any third party web site policies or actions San Diego Gas & Electric Company. All copyright and trademark rights reserved. Trademarks are property of their respective owners Page 19