Science Intensive Development (SID)

Size: px
Start display at page:

Download "Science Intensive Development (SID)"

Transcription

1 Science Intensive Development (SID) At, we develop custom software that requires specific scientific knowledge. We are experienced in realizing projects that had been considered impossible. The main guarantee of success is our company strategy: to keep in touch with reputed technical universities in Kharkiv that allows us to attract the best scientists for consultations. Moreover, our software development engineers received minimum Bachelor's degrees in computer science (most have Master's degrees) which insures a high threshold of technical competency. For now our expertise in solving various extraordinary and tricky problems concerns following areas of science intensive software development: CAD & CAE (Computer-Aided Design & Engineering) software development Applications of FEM in engineering Data processing and analysis Real-time physics simulation Solving such nontrivial scientific problems is based on strong technical background of each member at team, which faced such spheres as: Analytic & Numerical Analysis Computation Theories Computing Aided Design & Engineering Analytic Geometry, Nonlinear Computation, Statistics Though our competence isn't limited by these spheres.

2 Finite Element Solver Domain: FEM computations Summary: Modern engineering industry requires automation of thermal & structural analysis. For these purposes developed specific software that bases on Finite Element Method. Visualization of how a car deforms in an asymmetrical crash using finite element analysis. The Finite Element Method (FEM) (its practical application often known as finite element analysis (FEA)) is a numerical technique for finding approximate solutions of partial differential equations (PDE) as well as of integral equations. The solution approach is based either on eliminating the differential equation completely (steady state problems), or rendering the PDE into an approximating system of ordinary differential equations, which are then numerically integrated using standard techniques such as Euler's method, Runge-Kutta, etc. FES developed by is easily used package with thermal & structural solver and 2D post/preprocessor for finite-element analysis. Thermal & Structural 2D/3D FEM Solver allows to import AutoCAD drawings or prepared for use with FEMAP/ANSYS models, export results of solution to FEMAP for data processing. FES FES is an user-friendly software that is used in universities and in industries all over the world. Used technologies: C/C++ programming, OFELI

3 AGraphKernel Domain: FEM computations Summary: AGraphKernel is a graphical environment developed by that allows to prepare 3D models for thermal & structural FE-analysis. AGraphKernel supports import IGES models, automated tetra meshing of solid object generation, apply loads and constrains, setting of materials' properties, export finite-element models to FEMAP or ANSYS. Used technologies: C/C++ programming, MFC, OpenGL AGraphKernel

4 Domain: Computer-Aided Design 3D Geometrical Kernel Summary: 3D Geometrical Kernel is a cross platform library for 3D parametric modeling that allows to create models by such well known operations as extrusion, rotation, Boolean operations etc. 3D Geometrical Kernel Blade tip created with 3D Geometrical Kernel This package supports following features: Supporting of analytic and NURBS surfaces Exporting models to IGES format Direct modeling Solid BRep Lua scripting Event log Used technologies: C/C++ programming, Loki, QT, OpenGL, OpenNURBS

5 MeshReconstructor Domain: Reverse Engineering Summary: As Computer-Aided Design (CAD) has become more popular, reverse engineering has become a viable method to create a 3D virtual model of an existing physical part for use in 3D CAD, CAM, CAE or other software. The reverseengineering process involves measuring an object and then reconstructing it as a 3D model. The physical object can be measured using 3D scanning technologies like CMMs, laser scanners, structured light digitizers or computed tomography. The measured data alone, usually represented as a point cloud, lacks topological information and is therefore often processed and modeled into a more usable format such as a triangular-faced mesh, a set of NURBS surfaces or a CAD model. MeshReconstructor is an utility developed by that allows to reconstruct nonconvex mesh from point cloud for reverse engineering or rapid prototyping purposes. Used technologies: C/C++ programming, CGAL, OpenNURBS Reconstructed non-convex meshes

6 IGES to 3DM Converter Domain: Computer-Aided Design Summary: Initial Graphics Exchange Specification (IGES) defines a neutral data format that allows the digital exchange of information among Computer-Aided Design (CAD) systems. Using IGES, a CAD user can exchange product data models in the form of circuit diagrams, wireframe, free form surface or solid modeling representations. Applications supported by IGES include traditional engineering drawings, models for analysis, and other manufacturing functions. Rhinoceros (Rhino) is a stand-alone, commercial NURBSbased 3D Modeling tool, developed by Robert McNeel & Associates. The software is commonly used for industrial design, architecture, marine design, jewelry design, automative design, CAD / CAM, rapid prototyping, reverse engineering as well as the multimedia and graphic design industries. The Rhino file format (.3DM) is useful for the exchange of NURBS geometry. The Rhino developers started the opennurbsinitiative to provide computer graphics software developers the tools to accurately transfer 3-D geometry between applications. Team at developed an utility that allows to convert IGES file format to 3DM file format. Used technologies: C/C++ programming, OpenNURBS

7 3DM to ACIS/SAT Converter Domain: Computer-Aided Design Summary: The 3D ACIS Modeler (ACIS) is a 3D modelling kernel (or engine) owned by Spatial Corporation (formerly Spatial Technology). ACIS is used by many software developers industries such as Computer-Aided Design (CAD), Computer-Aided Manufacturing (CAM), Computer-Aided Engineering (CAE), Architecture Engineering and Construction (AEC), Coordinate-Measuring Machine(CMM), 3D animation, and shipbuilding. ACIS provides software developers and manufacturers the underlying 3D modeling functionality. ACIS saves modeling information to external files which have an open format allowing external applications, even those not based on ACIS, access to the ACIS geometric model. The basic information needed to understand the ACIS file format (focusing on the reading, or restore, operation), includes the structure of the save file format, how data is encapsulated, the types of data written, and subtypes and references. Rhinoceros (Rhino) is a stand-alone, commercial NURBS-based 3D Modeling tool, developed by Robert McNeel & Associates. The software is commonly used for industrial design, architecture, marine design, jewelry design, automative design, CAD / CAM, rapid prototyping, reverse engineering as well as the multimedia and graphic design industries. The Rhino file format (.3DM) is useful for the exchange of NURBS geometry. The Rhino developers started the opennurbsinitiative to provide computer graphics software developers the tools to accurately transfer 3-D geometry between applications. Team at developed an utility that allows to convert 3DM file format to ACIS/SAT file format. Used technologies: C/C++ programming, OpenNURBS

Our mission. The team at Jazzros has as its main object to provide such services which will be the basis for clients' successful business.

Our mission. The team at Jazzros has as its main object to provide such services which will be the basis for clients' successful business. is a software development and IT outsourcing company located in Kharkiv, Ukraine. We bring talented, skillful and creative developers and IT experts to optimize our clients systems to help them focus on

More information

Computer Graphics AACHEN AACHEN AACHEN AACHEN. Public Perception of CG. Computer Graphics Research. Methodological Approaches - - - - - - - - - -

Computer Graphics AACHEN AACHEN AACHEN AACHEN. Public Perception of CG. Computer Graphics Research. Methodological Approaches - - - - - - - - - - Public Perception of CG Games Computer Graphics Movies Computer Graphics Research algorithms & data structures fundamental continuous & discrete mathematics optimization schemes 3D reconstruction global

More information

Design & Drafting Services

Design & Drafting Services Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material

More information

ME 521 Computer Aided Design. 1. Introduction to CAD

ME 521 Computer Aided Design. 1. Introduction to CAD Computer Aided Design Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü Basic Definitions CAD: Computer Aided Design is the use of computer technology for

More information

FEAWEB ASP Issue: 1.0 Stakeholder Needs Issue Date: 03/29/2000. 04/07/2000 1.0 Initial Description Marco Bittencourt

FEAWEB ASP Issue: 1.0 Stakeholder Needs Issue Date: 03/29/2000. 04/07/2000 1.0 Initial Description Marco Bittencourt )($:(%$63 6WDNHKROGHU1HHGV,VVXH 5HYLVLRQ+LVWRU\ 'DWH,VVXH 'HVFULSWLRQ $XWKRU 04/07/2000 1.0 Initial Description Marco Bittencourt &RQILGHQWLDO DPM-FEM-UNICAMP, 2000 Page 2 7DEOHRI&RQWHQWV 1. Objectives

More information

CAD and Creativity. Contents

CAD and Creativity. Contents CAD and Creativity K C Hui Department of Automation and Computer- Aided Engineering Contents Various aspects of CAD CAD training in the university and the industry Conveying fundamental concepts in CAD

More information

Computer Aided Systems

Computer Aided Systems 5 Computer Aided Systems Ivan Kuric Prof. Ivan Kuric, University of Zilina, Faculty of Mechanical Engineering, Department of Machining and Automation, Slovak republic, ivan.kuric@fstroj.utc.sk 1.1 Introduction

More information

mechanical engineering design fem analysis prototypes

mechanical engineering design fem analysis prototypes mechanical engineering design fem analysis prototypes OUR BACKGROUND 50 For over a half century the Studio Tecnico Zocca has focused on the planning, analysis, calculation, design and construction of machines

More information

AutoCAD 3D. MicroStation. Courseware Issued (Optional) AutoCAD (30 Days Trial Version) Reference Guide Project Workbook

AutoCAD 3D. MicroStation. Courseware Issued (Optional) AutoCAD (30 Days Trial Version) Reference Guide Project Workbook 2D CAD Introduction Isometric drawings File management Perspective drawings Orthographic drawings Annotations and Dimensions View management Team work Display management Layout management Layer management

More information

Product and Service Catalog 2009 Direct Dimensions, Inc.

Product and Service Catalog 2009 Direct Dimensions, Inc. Product and Service Catalog 2009 LASER SCANNERS... 4 SURPHASER LASER SCANNER... 4 DIMENSIONAL IMAGING DI3D... 4 VIALUX Z-SNAPPER 3D CAMERA... 4 KONICA MINOLTA RANGE7 3D DIGITIZER... 4 KONICA MINOLTA VIVID

More information

Introduction to Computer Graphics

Introduction to Computer Graphics Introduction to Computer Graphics Torsten Möller TASC 8021 778-782-2215 torsten@sfu.ca www.cs.sfu.ca/~torsten Today What is computer graphics? Contents of this course Syllabus Overview of course topics

More information

Virtual Explorers: An Alternative Approach to Teaching Digital Rapid Visualization Dosun Shin, IDSA, Arizona State University

Virtual Explorers: An Alternative Approach to Teaching Digital Rapid Visualization Dosun Shin, IDSA, Arizona State University Virtual Explorers: An Alternative Approach to Teaching Digital Rapid Visualization Dosun Shin, IDSA, Arizona State University Introduction The significance of digital technology in industrial design has

More information

technical notes trimble realworks software

technical notes trimble realworks software technical notes trimble realworks software A POWERFUL 3D LASER SCANNING OFFICE SOFTWARE SUITE Designed for today s multifaceted scanning professional, Trimble RealWorks is a powerful office software that

More information

CFturbo Modern turbomachinery design software

CFturbo Modern turbomachinery design software COMPRESSOR Tech Magazine CFturbo Modern turbomachinery design software Designing new compressors from scratch and compressor redesign By Ralph-Peter Mueller & Gero Kreuzfeld Ralph-Peter Mueller and Gero

More information

Modern CAD/CAE/CAM Tools and Their Applications

Modern CAD/CAE/CAM Tools and Their Applications MECH 410 and MECH520 Computer-Aided Design Introduction Modern CAD/CAE/CAM Tools and Their Applications CAD (Mechanical Design Automation) State of the Art An Essential Tool for Mech. Design and Drafting

More information

PRODUCT BROCHURE SPATIAL ANALYZER. Powerful, traceable and easy-to-use metrology and analysis software

PRODUCT BROCHURE SPATIAL ANALYZER. Powerful, traceable and easy-to-use metrology and analysis software PRODUCT BROCHURE SPATIAL ANALYZER Powerful, traceable and easy-to-use metrology and analysis software SPATIAL ANALYZER SpatialAnalyzer (SA) is a powerful, traceable and easy to use metrology and analysis

More information

Trimble Realworks Software

Trimble Realworks Software TECHNICAL NOTES Trimble Realworks Software A Powerful 3D Laser Scanning Office Software Suite DESIGNED FOR TODAY S MULTIFACETED SCANNING PROFESSIONAL, TRIMBLE REALWORKS IS A POWERFUL OFFICE SOFTWARE THAT

More information

ARLO L. AMES Distinguished Member of Technical Staff Sandia National Laboratories, Albuquerque, NM 87185 Office: (505) 844-3210 alames@sandia.

ARLO L. AMES Distinguished Member of Technical Staff Sandia National Laboratories, Albuquerque, NM 87185 Office: (505) 844-3210 alames@sandia. ARLO L. AMES Distinguished Member of Technical Staff Sandia National Laboratories, Albuquerque, NM 87185 Office: (505) 844-3210 alames@sandia.gov Arlo Ames holds bachelor s and master s degrees in mechanical

More information

Course in ANSYS. Import + meshing issues. ANSYS Part 2 Computational Mechanics, AAU, Esbjerg

Course in ANSYS. Import + meshing issues. ANSYS Part 2 Computational Mechanics, AAU, Esbjerg Course in ANSYS Import + meshing issues Course Outline Introduction Lesson 1. Modeling reviewed Boolean s Lesson 2. Boolean s + meshing issues Lesson 3. Operate + meshing issues Lesson 4. Import + meshing

More information

AML710 CAD LECTURE 1. Introduction to CAD. Motivation Principles of CAD / CAM. AML710 Computer Aided Design

AML710 CAD LECTURE 1. Introduction to CAD. Motivation Principles of CAD / CAM. AML710 Computer Aided Design AML710 CAD LECTURE 1 Introduction to CAD Motivation Principles of CAD / CAM AML710 Computer Aided Design L-T-P 3-0-2 : 4 Credits Prerequisites and background Course Coordinator Course Webpage http://web.iitd.ac.in/~hegde/cad

More information

Optical Digitizing by ATOS for Press Parts and Tools

Optical Digitizing by ATOS for Press Parts and Tools Optical Digitizing by ATOS for Press Parts and Tools Konstantin Galanulis, Carsten Reich, Jan Thesing, Detlef Winter GOM Gesellschaft für Optische Messtechnik mbh, Mittelweg 7, 38106 Braunschweig, Germany

More information

Computer Aided Design and Drafting (CAD)

Computer Aided Design and Drafting (CAD) Oakland Community College 2015-2016 Catalog 1 Computer Aided Design and Drafting (CAD) CAD 1050 Geometric Dimensioning and Tolerancing (GD&T) This course is designed to cover the fundamentals as well as

More information

CAD/CAM and the Exchange of Product Data

CAD/CAM and the Exchange of Product Data CAD/CAM and the Exchange of Product Data N.-J. Høimyr CERN, Geneva, Switzerland Abstract A 3D model defined in a CAD-system is used as a basis for design and product development. The concept of Computer

More information

CHAPTER 1. Introduction to CAD/CAM/CAE Systems

CHAPTER 1. Introduction to CAD/CAM/CAE Systems CHAPTER 1 1.1 OVERVIEW Introduction to CAD/CAM/CAE Systems Today s industries cannot survive worldwide competition unless they introduce new products with better quality (quality, Q), at lower cost (cost,

More information

SOFTWARE FOR 3D IMAGE VISUALISATION, ANALYSIS AND MODEL GENERATION

SOFTWARE FOR 3D IMAGE VISUALISATION, ANALYSIS AND MODEL GENERATION SOFTWARE FOR 3D IMAGE VISUALISATION, ANALYSIS AND MODEL GENERATION Solutions for Life Sciences SIMPLEWARE SOFTWARE Simpleware provides easy-to-use software solutions for the processing of 3D image data

More information

Computer Animation and Visualisation. Lecture 1. Introduction

Computer Animation and Visualisation. Lecture 1. Introduction Computer Animation and Visualisation Lecture 1 Introduction 1 Today s topics Overview of the lecture Introduction to Computer Animation Introduction to Visualisation 2 Introduction (PhD in Tokyo, 2000,

More information

Avizo AvizoFire - The 3D visualization Software for NDT & Materials Science

Avizo AvizoFire - The 3D visualization Software for NDT & Materials Science Avizo AvizoFire - The 3D visualization Software for NDT & Materials Science Peter Westenberger Application Enginieer May 7, 2010 Avizo Visualize to Understand Avizo software is a powerful, multifaceted

More information

FLUX / GOT-It Finite Element Analysis of electromagnetic devices Maccon GmbH

FLUX / GOT-It Finite Element Analysis of electromagnetic devices Maccon GmbH FLUX / GOT-It Finite Element Analysis of electromagnetic devices Maccon GmbH Entwurfswerkzeuge für elektrische Maschinen MACCON GmbH 09/04/2013 1 Flux software Modeling electromagnetic and thermal phenomena

More information

High-end FEA pre/postprocessor

High-end FEA pre/postprocessor Advanced FEM: High-end FEA pre/postprocessor NX CAE Benefits Speed analysis modeling processes by up to 70 percent Increase product quality by rapidly simulating design trade-off studies Lower overall

More information

Multiphysics Software Applications in Reverse Engineering

Multiphysics Software Applications in Reverse Engineering Multiphysics Software Applications in Reverse Engineering *W. Wang 1, K. Genc 2 1 University of Massachusetts Lowell, Lowell, MA, USA 2 Simpleware, Exeter, United Kingdom *Corresponding author: University

More information

11/11/2014. Sharif University of Technology. Session # 9. Computer-Aided Design (CAD) Department of Industrial Engineering. Geometric modeling

11/11/2014. Sharif University of Technology. Session # 9. Computer-Aided Design (CAD) Department of Industrial Engineering. Geometric modeling Advanced Manufacturing Laboratory Department of Industrial Engineering Sharif University of Technology Session # 9 Computer-Aided Design (CAD) Geometric modeling Geometric modeling techniques 2 1 Features

More information

CCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future

CCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future . CCTech TM Simulation is The Future ICEM-CFD & FLUENT Software Training Course Brochure About. CCTech Established in 2006 by alumni of IIT Bombay. Our motive is to establish a knowledge centric organization

More information

Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology

Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry

More information

EasySTONE Info Sheet

EasySTONE Info Sheet EasySTONE Info Sheet EasySTONE, Info Sheet Page 1 of 9 EasySTONE is the ideal CAD/CAM for marble and similar materials working industry by numerically controlled machining centres. EasySTONE is complete

More information

MEng, BSc Computer Science with Artificial Intelligence

MEng, BSc Computer Science with Artificial Intelligence School of Computing FACULTY OF ENGINEERING MEng, BSc Computer Science with Artificial Intelligence Year 1 COMP1212 Computer Processor Effective programming depends on understanding not only how to give

More information

Manufacturing Process and Cost Estimation through Process Detection by Applying Image Processing Technique

Manufacturing Process and Cost Estimation through Process Detection by Applying Image Processing Technique Manufacturing Process and Cost Estimation through Process Detection by Applying Image Processing Technique Chalakorn Chitsaart, Suchada Rianmora, Noppawat Vongpiyasatit Abstract In order to reduce the

More information

T-FLEX Parametric CAD is a full-function software system providing mechanical design professionals with the tools they need for today's complex

T-FLEX Parametric CAD is a full-function software system providing mechanical design professionals with the tools they need for today's complex T-FLEX Parametric CAD is a full-function software system providing mechanical design professionals with the tools they need for today's complex design challenges. It unites powerful parametric 3D modeling

More information

3D REVERSE ENGINEERING SOFTWARE

3D REVERSE ENGINEERING SOFTWARE 3D REVERSE ENGINEERING SOFTWARE PRODUCT WORKFLOWS GEOMAGIC STUDIO WORKFLOW SCAN AND PROBE Collect 3D point cloud and probe data from physical objects to form the basis of the new 3D model. PROCESS Use

More information

INTERFACES FOR EMBEDDING CFD OPTIMISATION WORKFLOWS INTO THE PRODUCT DEVELOPMENT PROCESS

INTERFACES FOR EMBEDDING CFD OPTIMISATION WORKFLOWS INTO THE PRODUCT DEVELOPMENT PROCESS ADVANCED ENGINEERING 4(2010)2, ISSN 1846-5900 INTERFACES FOR EMBEDDING CFD OPTIMISATION WORKFLOWS INTO THE PRODUCT DEVELOPMENT PROCESS Todorov, G.; Ovcharova, J.; Romanov, B. & Kamberov, K. Abstract: The

More information

Computer Applications in Textile Engineering. Computer Applications in Textile Engineering

Computer Applications in Textile Engineering. Computer Applications in Textile Engineering 3. Computer Graphics Sungmin Kim http://latam.jnu.ac.kr Computer Graphics Definition Introduction Research field related to the activities that includes graphics as input and output Importance Interactive

More information

Simulation Techniques for Tablet and Mobile Phone Design Bill McGinn; Ansys Senior Application Engineer

Simulation Techniques for Tablet and Mobile Phone Design Bill McGinn; Ansys Senior Application Engineer Simulation Techniques for Tablet and Mobile Phone Design Bill McGinn; Ansys Senior Application Engineer 1 Tablets in our daily lives Tablets are very entertaining, stylish and powerful Shopping, reading,

More information

ME6130 An introduction to CFD 1-1

ME6130 An introduction to CFD 1-1 ME6130 An introduction to CFD 1-1 What is CFD? Computational fluid dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically

More information

BIOE 447 DIGITAL DESIGN AND VISUALIZATION Syllabus Spring 2014

BIOE 447 DIGITAL DESIGN AND VISUALIZATION Syllabus Spring 2014 BIOE 447 DIGITAL DESIGN AND VISUALIZATION Syllabus Spring 2014 INSTRUCTOR Dr. Matthew Wettergreen OEDK B03 713-348-2043 mwettergreen@rice.edu office hours: By appointment COURSE ADMINISTRATION Course Objectives

More information

Goal Seeking in Solid Edge

Goal Seeking in Solid Edge Goal Seeking in Solid Edge White Paper Goal Seeking in Solid Edge software offers a fast built-in method for solving complex engineering problems. By drawing and dimensioning 2D free-body diagrams, Goal

More information

MEng, BSc Applied Computer Science

MEng, BSc Applied Computer Science School of Computing FACULTY OF ENGINEERING MEng, BSc Applied Computer Science Year 1 COMP1212 Computer Processor Effective programming depends on understanding not only how to give a machine instructions

More information

LSCFD: Meshing Tools for Open Source CFD A Practical Point of View

LSCFD: Meshing Tools for Open Source CFD A Practical Point of View LSCFD: Meshing Tools for Open Source CFD A Practical Point of View Juha Kortelainen Report: Meshing Tools for Open Source CFD A Practical Point of View LSCFD Tools for Large Scale

More information

Parametric Modeling: The New CAD Paradigm for Mechanical Designs Randy Shih

Parametric Modeling: The New CAD Paradigm for Mechanical Designs Randy Shih Parametric Modeling: The New CAD Paradigm for Mechanical Designs Randy Shih There is a new kid on the block in the arena of mechanical CAD technology, and that new kid has already formed a new paradigm

More information

Plastics made perfect

Plastics made perfect Plastics made perfect Validation and optimization of plastic parts Innovative plastic resins and functional plastic part designs are on the rise in almost every industry. Plastics and fiber-filled composites

More information

Fig. 1. Before and after CIA treatment

Fig. 1. Before and after CIA treatment PROCEEDINGS OF THE INSTITUTE OF VEHICLES 3(89)/2012 (12pt) (12pt) Grzegorz Służałek 1, Marek Kubica 2, Mateusz Służałek 3 (12pt) COMPUTER METHODS IN STUDY OF HISTORICAL ASSYRIANS CHARIOT (12pt) 1. Introduction

More information

Advanced bolt assessment through process automation

Advanced bolt assessment through process automation Titelmasterformat Bolt Assessment inside durch ANSYS Klicken bearbeiten Advanced bolt assessment through process automation Contents Short presentation of VDI 2230 Workflow with Bolt Assessment inside

More information

Revit MEP. Autodesk Navisworks

Revit MEP. Autodesk Navisworks What is BIM? Autodesk BIM is an intelligent model-based process that helps owners and service providers achieve business results by enabling more accurate, accessible, and actionable insight throughout

More information

CAE DATA & PROCESS MANAGEMENT WITH ANSA

CAE DATA & PROCESS MANAGEMENT WITH ANSA CAE DATA & PROCESS MANAGEMENT WITH ANSA Srikanth RAGHOTHAM Volvo India Private Limited Volvo Group Bangalore INDIA KEYWORDS Enovia-2-Ansa, Ansa Data Management (Ansa-DM) TECHNICAL PAPER CAE Data & Process

More information

Developing a Feature-based System for Automated Machining Feature Recognition (ISO 10303 AP 224) of Prismatic Components

Developing a Feature-based System for Automated Machining Feature Recognition (ISO 10303 AP 224) of Prismatic Components Developing a Feature-based System for Automated Machining Feature Recognition (ISO 10303 AP 224) of Prismatic Components Chen Wong Keong 1, a, Yusri Yusof 2,b 1 Department of Mechanical Engineering, Polytechnic

More information

Course Description. Spring 2004 1

Course Description. Spring 2004 1 Spring 2004 1 Course Description AE4375: advanced treatment for undergrads; focus on learning and aplying CAD to engineering; CAD modeling projects. AE6380: graduate course on CAD focusing on how tools

More information

Kankakee Community College

Kankakee Community College Kankakee Community College Course prefix and number: DRFT 2134 Course title: AutoCAD III Semester: Fall 2014 Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Catalog description: Prerequisite: DRFT 2114,

More information

Rapid Design of an optimized Radial Compressor using CFturbo and ANSYS

Rapid Design of an optimized Radial Compressor using CFturbo and ANSYS Rapid Design of an optimized Radial Compressor using CFturbo and ANSYS Enrique Correa, Marius Korfanty, Sebastian Stübing CFturbo Software & Engineering GmbH, Dresden (Germany) PRESENTATION TOPICS 1. Company

More information

Models of surfaces by 3D printing

Models of surfaces by 3D printing Models of surfaces by 3D printing 17/10/2007 Gregorio Franzoni Università di Cagliari Dip. di Matematica e Informatica 1 Models of mathematical objects Why producing visual and physical models? Fields

More information

Glass coloured glass may pick up on scan. Top right of screen tabs: these tabs will relocate lost windows.

Glass coloured glass may pick up on scan. Top right of screen tabs: these tabs will relocate lost windows. Artec 3D scanner Instructions for Medium Handheld (MH) Scanner Scanning Conditions: Objects/surfaces that don t scan well: Black or shiny objects and objects with sharp edges or points, hair, glass, transparent

More information

Arm2. Arm Arm22. Articulated Arm. machines MEASURING. tridimensional measuring FRATELLI ROTONDI

Arm2. Arm Arm22. Articulated Arm. machines MEASURING. tridimensional measuring FRATELLI ROTONDI Arm Arm22 2 Arm2 tridimensional measuring Articulated Arm MEASURING machines FRATELLI ROTONDI Arm2 MEASURING Arm2Arm2 SOFTWARE Software in WINDOWS environment: sura tridimesio - elements with definite

More information

REVERSE ENGINEERING OF PHYSICAL OBJECTS TEACHING MANUAL. March 2014. Version 1.0

REVERSE ENGINEERING OF PHYSICAL OBJECTS TEACHING MANUAL. March 2014. Version 1.0 REVERSE ENGINEERING OF PHYSICAL OBJECTS TEACHING MANUAL March 2014 Version 1.0 TABLE OF CONTENTS INTRODUCTION... 7 1. REVERSE ENGINEERING: THE THEORY... 8 1.1. What Is Reverse Engineering?... 8 1.2. What

More information

MODERN VOXEL BASED DATA AND GEOMETRY ANALYSIS SOFTWARE TOOLS FOR INDUSTRIAL CT

MODERN VOXEL BASED DATA AND GEOMETRY ANALYSIS SOFTWARE TOOLS FOR INDUSTRIAL CT MODERN VOXEL BASED DATA AND GEOMETRY ANALYSIS SOFTWARE TOOLS FOR INDUSTRIAL CT C. Reinhart, C. Poliwoda, T. Guenther, W. Roemer, S. Maass, C. Gosch all Volume Graphics GmbH, Heidelberg, Germany Abstract:

More information

SGI HPC Systems Help Fuel Manufacturing Rebirth

SGI HPC Systems Help Fuel Manufacturing Rebirth SGI HPC Systems Help Fuel Manufacturing Rebirth Created by T A B L E O F C O N T E N T S 1.0 Introduction 1 2.0 Ongoing Challenges 1 3.0 Meeting the Challenge 2 4.0 SGI Solution Environment and CAE Applications

More information

Introduction to Computer Graphics. Jürgen P. Schulze, Ph.D. University of California, San Diego Fall Quarter 2012

Introduction to Computer Graphics. Jürgen P. Schulze, Ph.D. University of California, San Diego Fall Quarter 2012 CSE 167: Introduction to Computer Graphics Jürgen P. Schulze, Ph.D. University of California, San Diego Fall Quarter 2012 Today Course organization Course overview 2 Course Staff Instructor Jürgen Schulze,

More information

Introduction to the Siemens PLM End to End Solution for Composites

Introduction to the Siemens PLM End to End Solution for Composites Introduction to the Siemens PLM End to End Solution for Composites Restricted Siemens AG 2014 2013 All rights reserved. Page 1 Siemens PLM is Dedicated to the Future of Lightweight Engineering Bringing

More information

COURSE CATALOGUE 2013-2014

COURSE CATALOGUE 2013-2014 COURSE CATALOGUE 201-201 Field: COMPUTER SCIENCE Programme: Bachelor s Degree Programme in Computer Science (Informatics) Length of studies: years (6 semesters) Number of ECTS Credits: 180 +0 for the B.Sc.

More information

On One Approach to Scientific CAD/CAE Software Developing Process

On One Approach to Scientific CAD/CAE Software Developing Process ISSN (Online): 1694-0784 ISSN (Print): 1694-0814 9 On One Approach to Scientific CAD/CAE Software Developing Process George Sergia 1, Alexander Demurov 2, George Petrosyan 3, Roman Jobava 4 1 Exact and

More information

GiPSi: An Open Source/Open Architecture Software Development Framework for Surgical Simulation

GiPSi: An Open Source/Open Architecture Software Development Framework for Surgical Simulation GiPSi: An Open Source/Open Architecture Software Development Framework for Surgical Simulation Tolga Gokce Goktekin 2, Murat Cenk Çavuşoğlu 1, Frank Tendick 3, and Shankar Sastry 2 1 Dept. of Electrical

More information

Creation of an Unlimited Database of Virtual Bone. Validation and Exploitation for Orthopedic Devices

Creation of an Unlimited Database of Virtual Bone. Validation and Exploitation for Orthopedic Devices Creation of an Unlimited Database of Virtual Bone Population using Mesh Morphing: Validation and Exploitation for Orthopedic Devices Najah Hraiech 1, Christelle Boichon 1, Michel Rochette 1, 2 Thierry

More information

Getting Started with ANSYS ANSYS Workbench Environment

Getting Started with ANSYS ANSYS Workbench Environment Getting Started with ANSYS ANSYS Workbench Environment Overview The purpose of this tutorial is to get you started with the ANSYS Workbench environment. We will use a simple, static analysis of a single

More information

Civil Engineering Informatics Specialist

Civil Engineering Informatics Specialist Ministry of Communications and Information Technology Information Technology Institute Civil Engineering Informatics Specialist Engineering Informatics Intake 35 Historical Background! The Engineering

More information

Digital 3D Animation

Digital 3D Animation Elizabethtown Area School District Digital 3D Animation Course Number: 753 Length of Course: 1 semester 18 weeks Grade Level: 11-12 Elective Total Clock Hours: 120 hours Length of Period: 80 minutes Date

More information

CAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering

CAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering CAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering So what we will do in today s lecture is basically take

More information

Bericht über FEMAG 3D

Bericht über FEMAG 3D Bericht über FEMAG 3D Dr.-Ing. Bogdan Funieru Würzburg, 21 October 2008 Dr.-Ing. B. Funieru 1 Contents Motivation and Concept LUA Script Extrusion Control Periodic Boundary Condition FEMAG 2D 3D Results

More information

CAE - CFD & FEA Manufacturing Support Value Engineering

CAE - CFD & FEA Manufacturing Support Value Engineering Mechanical Design Services Reverse Engineering & Rapid Prototyping CAE - CFD & FEA Manufacturing Support Value Engineering Automotive Engineering Services ISO 9001 ISO 22301 ISO/IEC 27001 Product Life-Cycle

More information

MSC Aerospace Solutions: Optimizing the Design-to-Certification Process

MSC Aerospace Solutions: Optimizing the Design-to-Certification Process MSC Aerospace Solutions: Optimizing the Design-to-Certification Process Aerospace Business Unit The MacNeal-Schwendler Corporation Los Angeles, California USA Abstract This paper describes MSC's solutions

More information

Master of Science in Computer Science

Master of Science in Computer Science Master of Science in Computer Science Background/Rationale The MSCS program aims to provide both breadth and depth of knowledge in the concepts and techniques related to the theory, design, implementation,

More information

Geometric Modelling & Curves

Geometric Modelling & Curves Geometric Modelling & Curves Geometric Modeling Creating symbolic models of the physical world has long been a goal of mathematicians, scientists, engineers, etc. Recently technology has advanced sufficiently

More information

Titelmasterformat durch Klicken bearbeiten

Titelmasterformat durch Klicken bearbeiten Titelmasterformat durch Klicken bearbeiten ANSYS AIM Product simulation for every engineer Erke Wang CADFEM GmbH Georg Scheuerer ANSYS Germany GmbH Christof Gebhardt CADFEM GmbH All products involve multiple

More information

List of Problems Solved Introduction p. 1 Concept p. 1 Nodes p. 3 Elements p. 4 Direct Approach p. 5 Linear Spring p. 5 Heat Flow p.

List of Problems Solved Introduction p. 1 Concept p. 1 Nodes p. 3 Elements p. 4 Direct Approach p. 5 Linear Spring p. 5 Heat Flow p. Preface p. v List of Problems Solved p. xiii Introduction p. 1 Concept p. 1 Nodes p. 3 Elements p. 4 Direct Approach p. 5 Linear Spring p. 5 Heat Flow p. 6 Assembly of the Global System of Equations p.

More information

Computational Fluid Dynamics in Automotive Applications

Computational Fluid Dynamics in Automotive Applications Computational Fluid Dynamics in Automotive Applications Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom FSB, University of Zagreb, Croatia 1/15 Outline Objective Review the adoption of Computational

More information

AFM Image Deconvolution Software User s Manual

AFM Image Deconvolution Software User s Manual M. C. Goh Research Group Version 2.0 AFM Image Deconvolution Software User s Manual Table of Content Introduction Contact M. C. Goh Research Group... 3 Zod Information... 3 Installing Zod Downloading files...

More information

XT B-Rep; Making it Real

XT B-Rep; Making it Real XT B-Rep; Making it Real John Juckes Siemens PL SEPTEMBER 12-14 What is XT? Based on research from the Cambridge University Computer lab under Ian Braid The world s leading high precision, production-proven,

More information

LASER SCANNER APPLICATION ON COMPLEX SHAPES OF ARCHITECTURE. PROFILES EXTRACTION PROCESSING AND 3D MODELLING.

LASER SCANNER APPLICATION ON COMPLEX SHAPES OF ARCHITECTURE. PROFILES EXTRACTION PROCESSING AND 3D MODELLING. LASER SCANNER APPLICATION ON COMPLEX SHAPES OF ARCHITECTURE. PROFILES EXTRACTION PROCESSING AND 3D MODELLING. Carlo MONTI Full Professor E-mail: carlo.monti@polimi.it Luigi FREGONESE Research Assegnist

More information

Efficient Storage, Compression and Transmission

Efficient Storage, Compression and Transmission Efficient Storage, Compression and Transmission of Complex 3D Models context & problem definition general framework & classification our new algorithm applications for digital documents Mesh Decimation

More information

WORLD CLASS COMPOSITE ENGINEERING THROUGH COMPETENCE, EXPERIENCE AND INNOVATION

WORLD CLASS COMPOSITE ENGINEERING THROUGH COMPETENCE, EXPERIENCE AND INNOVATION WORLD CLASS COMPOSITE ENGINEERING THROUGH COMPETENCE, EXPERIENCE AND INNOVATION THROUGH COMPETENCE, EXPERIENCE AND INNOVATION Unlimited Possibilities Composites Consulting Group (CCG), an independent division

More information

SAN DIEGO COMMUNITY COLLEGE DISTRICT MESA COLLEGE ASSOCIATE DEGREE COURSE OUTLINE

SAN DIEGO COMMUNITY COLLEGE DISTRICT MESA COLLEGE ASSOCIATE DEGREE COURSE OUTLINE MULT 130 CIC Approval: 03/12/2015 BOT APPROVAL: 04/16/2015 STATE APPROVAL: EFFECTIVE TERM: Fall 2015 SECTION I SAN DIEGO COMMUNITY COLLEGE DISTRICT MESA COLLEGE ASSOCIATE DEGREE COURSE OUTLINE SUBJECT

More information

Proper Implementation of Industrial CT Scanning to Reduce Inspection Costs & Get to Production Faster. Jesse Garant, JG&A Metrology Center

Proper Implementation of Industrial CT Scanning to Reduce Inspection Costs & Get to Production Faster. Jesse Garant, JG&A Metrology Center Proper Implementation of Industrial CT Scanning to Reduce Inspection Costs & Get to Production Faster Jesse Garant, JG&A Metrology Center Traditional Metrology and Inspection Tactile Devices (Touch Probe)

More information

Image Based-Mesh Generation for realistic Simulation of thetranscranial Current Stimulation

Image Based-Mesh Generation for realistic Simulation of thetranscranial Current Stimulation Presented at the COMSOL Conference 2008 Hannover Image Based-Mesh Generation for realistic Simulation of thetranscranial Current Stimulation Ash Harkara Business Manager Presentation overview Company overview

More information

GEOMETRIC, THERMODYNAMIC AND CFD ANALYSES OF A REAL SCROLL EXPANDER FOR MICRO ORC APPLICATIONS

GEOMETRIC, THERMODYNAMIC AND CFD ANALYSES OF A REAL SCROLL EXPANDER FOR MICRO ORC APPLICATIONS 2 nd International Seminar on ORC Power Systems October 7 th & 8 th, 213 De Doelen, Rotterdam, NL GEOMETRIC, THERMODYNAMIC AND CFD ANALYSES OF A REAL SCROLL EXPANDER FOR MICRO ORC APPLICATIONS M. Morini,

More information

Questions and Answers

Questions and Answers Autodesk Factory Design Suite 2013 Questions and Answers Autodesk Factory Design Suite enhances the power of AutoCAD with the benefits of Digital Prototyping, so you spend less time drafting and more time

More information

AN APPROACH FOR SECURE CLOUD COMPUTING FOR FEM SIMULATION

AN APPROACH FOR SECURE CLOUD COMPUTING FOR FEM SIMULATION AN APPROACH FOR SECURE CLOUD COMPUTING FOR FEM SIMULATION Jörg Frochte *, Christof Kaufmann, Patrick Bouillon Dept. of Electrical Engineering and Computer Science Bochum University of Applied Science 42579

More information

Siemens PLM Software FEMAP. Powering today s most advanced engineering analysis environment. siemens.com/plm/femap

Siemens PLM Software FEMAP. Powering today s most advanced engineering analysis environment. siemens.com/plm/femap Siemens PLM Software FEMAP Powering today s most advanced engineering analysis environment siemens.com/plm/femap Best-in-class digital simulation Why digital simulation? Industry pressure to reduce costs

More information

AC 2011-151: TEACHING SURFACE MODELING TO CAD/CAM TECH- NOLOGISTS

AC 2011-151: TEACHING SURFACE MODELING TO CAD/CAM TECH- NOLOGISTS AC 2011-151: TEACHING SURFACE MODELING TO CAD/CAM TECH- NOLOGISTS Derek M. Yip-Hoi, Western Washington University Derek Yip-Hoi has a Ph.D. in Mechanical Engineering from the University of Michigan. He

More information

Job scheduling of parametric computational mechanics studies on Cloud Computing infrastructures

Job scheduling of parametric computational mechanics studies on Cloud Computing infrastructures HPC-Cetraro 2012 1/29 Job scheduling of parametric computational mechanics studies on Cloud Computing infrastructures Carlos García Garino Cristian Mateos Elina Pacini HPC 2012 High Perfomance Computing,

More information

IronCAD s Hyper-Operability. IRONCAD TRANS Translators & Data Sharing

IronCAD s Hyper-Operability. IRONCAD TRANS Translators & Data Sharing With IronCAD s Design Collaboration Suite, engineers communicate more freely. Dual ACIS and Parasolid kernels allow precise, error-free import and export of native SAT and _T files as well as common file

More information

Modern CAD/CAE/CAM Tools and Their Applications

Modern CAD/CAE/CAM Tools and Their Applications MECH 410 and MECH520 Introduction Modern CAD/CAE/CAM Tools and Their Applications Zuomin Dong, Professor Department of Mechanical Engineering CAD (Mechanical Design Automation) State of the Art An Essential

More information

Robust NURBS Surface Fitting from Unorganized 3D Point Clouds for Infrastructure As-Built Modeling

Robust NURBS Surface Fitting from Unorganized 3D Point Clouds for Infrastructure As-Built Modeling 81 Robust NURBS Surface Fitting from Unorganized 3D Point Clouds for Infrastructure As-Built Modeling Andrey Dimitrov 1 and Mani Golparvar-Fard 2 1 Graduate Student, Depts of Civil Eng and Engineering

More information

Leeds the Automation Degree in the Processing of Laser Scan Data to Better Final Products?

Leeds the Automation Degree in the Processing of Laser Scan Data to Better Final Products? Leeds the Automation Degree in the Processing of Laser Scan Data to Better Final Products? Ivo MILEV, Germany Key words: Terrestrial Laser scanning for engineering survey, site surveying, data processing

More information

salome-platform.org SALOME7 THE OPEN SOURCE INTEGRATION PLATFORM FOR NUMERICAL SIMULATION

salome-platform.org SALOME7 THE OPEN SOURCE INTEGRATION PLATFORM FOR NUMERICAL SIMULATION salome-platform.org SALOME7 THE OPEN SOURCE INTEGRATION PLATFORM FOR NUMERICAL SIMULATION SALOME7 PLATFORM The SALOME software platform is an open framework that can integrate scientific solvers for modelling

More information

Overset Grids Technology in STAR-CCM+: Methodology and Applications

Overset Grids Technology in STAR-CCM+: Methodology and Applications Overset Grids Technology in STAR-CCM+: Methodology and Applications Eberhard Schreck, Milovan Perić and Deryl Snyder eberhard.schreck@cd-adapco.com milovan.peric@cd-adapco.com deryl.snyder@cd-adapco.com

More information