ANSYS Environment for Multidisciplinary Simulation
|
|
|
- Shannon Copeland
- 7 years ago
- Views:
Transcription
1 ANSYS Environment for Multidisciplinary Simulation Phil Stopford ANSYS UK Duxford Air Museum 11th May ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
2 Range of Technologies ANSYS Software provides a comprehensive range of simulation technologies: Computational Fluid Dynamics (CFD) Finite Element Analysis (FEA) Implicit (low speed) Explicit (high speed impact/blast) Electromagnetics Low frequency (Motors / Transformers) High frequency (Microwave / Signal Integrity) 2011 ANSYS, Inc. All rights reserved. 2 ANSYS, Inc. Proprietary
3 Modelling Approach CFD and FEA models offer reliable, validated techniques for simulating how fluids and structures behave The underlying technology is very similar: A CAD model of the part is made, Control Volume This is decomposed into a large number of component grid cells, or elements The governing equations of fluid or structural mechanics are then solved at each of these grid locations (usually in an iterative manner). Combined, this provides a detailed 3D picture of how the part responds to the loads / flow conditions involved Finite Element 2011 ANSYS, Inc. All rights reserved. 3 ANSYS, Inc. Proprietary
4 Simulation Driven Product Development Our Vision & Strategy Structural Mechanics Comprehensive Multiphysics Workflow Management Knowledge Management Fluid Dynamics Thermal Analysis Electromagnetics Meshing Complete System Modeling Bi-Directional CAD Associativity Automated Tools High Performance Computing Access Management Data Management Design Exploration Process Management ANSYS, Inc. All rights reserved. 4 ANSYS, Inc. Proprietary
5 Meshing Emag Thermal Fluids Structural Structural Advanced Capabilities Nonlinear materials Large deformation 3D frictional contact Structural dynamics Explicit dynamics Large overall motion High Performance Computing Parallel processing Highly scalable Customizable User elements & materials Scripting 2011 ANSYS, Inc. All rights reserved. 5 ANSYS, Inc. Proprietary
6 Meshing Emag Thermal Fluids Structural Fluids Advanced Capabilities Multiphase Multispecies flows Reacting flows Multiple reference frames Latest turbulence models High Performance Computing Large models: >1 billion Large clusters: >1024 cores Integrated Unified meshing CFX & Fluent solvers Unified post-processing 2011 ANSYS, Inc. All rights reserved. 6 ANSYS, Inc. Proprietary
7 Meshing Emag Thermal Fluids Structural Thermal Advanced Capabilities Radiation Phase change Mass transport Steady-state Transient Conduction Convection Far field decay Time dependent boundary conditions Advanced Materials Temperature dependent 2011 ANSYS, Inc. All rights reserved. 7 ANSYS, Inc. Proprietary
8 Meshing Emag Thermal Fluids Structural Electromagnetics High Frequency Full wave solution S-parameters Radiated field outputs Low Frequency Magnetostatic Transient Eddy current Advanced Materials Nonlinear Isotropic & anisotropic Frequency dependent Automated Pre & Post-Processing Adaptive meshing 2011 ANSYS, Inc. All rights reserved. 8 ANSYS, Inc. Proprietary
9 Meshing Emag Thermal Fluids Structural Meshing CAD Associativity Bi-directional Persistent Parametric Flexible Geometry clean up Multiple mesh methods Advanced mesh controls Highly Automated Automatic contact Apply loads to features Physics aware Courtesy of Ford Motor Company 2011 ANSYS, Inc. All rights reserved. 9 ANSYS, Inc. Proprietary
10 In-Depth Technology Spanning Multiple Domains Technical Breadth Meshing Tet/Prism Hex/Hex Core Structured Unstructured Multi-zone Body-fitted Cartesian Patch Independent More Technical Depth Structural Large Displacements Finite Strain Contact Multibody Dynamics Random Vibration Implicit & Explicit Fluids Compressible Incompressible Laminar Flow Thermal Conduction Convection Radiation Phase Change Mass Transport Electromagnetics Quasi static (Low Freq) Full Wave (High Freq) More Turbulence Multiphase Flow Non-Newtonian Fluids More More Eddy current Transient with motion Circuit Coupling More Steady-State, Transient, Harmonic & Modal Linear & Nonlinear 2011 ANSYS, Inc. All rights reserved. 10 ANSYS, Inc. Proprietary
11 End-To-End Solutions In a Unified Environment 2011 ANSYS, Inc. All rights reserved. 11 ANSYS, Inc. Proprietary
12 Multiphysics Built on a Strong Foundation Reduce engineering assumptions by coupling multiple physics Meshing Fluids Workflow Increase productivity by including all physics in unified environment Structural Thermal CAD Import Emag Design Points Rely more on high fidelity virtual prototypes Postprocess Depend less on costly physical testing 2011 ANSYS, Inc. All rights reserved. 12 ANSYS, Inc. Proprietary
13 Multiphysics For High Fidelity Virtual Prototyping Reduce engineering assumptions by including all physics in one unified environment. Fluid-Structure Fluid-Thermal Thermal-Electric Structural Piezoelectricity/ Piezoresistivity Electromagnetic- Thermal Thermal- Structural Thermal-Electric Magnetic- Structural 2011 ANSYS, Inc. All rights reserved. 13 ANSYS, Inc. Proprietary
14 Scalable Performance Desktop to Cluster Moderately Complex Geometry Multiple Physics Moderately Complex Assemblies Cluster Desktop Work Station Long Transient Analyses Complex Geometry Large Assemblies DOE Problem Size/Solution Speed 2011 ANSYS, Inc. All rights reserved. 14 ANSYS, Inc. Proprietary
15 Scalable Deployment Expands with Maturing Processes An Interface Which Reduces Technical Barriers Model & Data Sharing Enterprise Single User Work Group Automated Workflow Knowledge Capture Data Mgmt Protect Intellectual Property Organization/Process Maturity 2011 ANSYS, Inc. All rights reserved. 15 ANSYS, Inc. Proprietary
16 Scalable Flexibility Balancing Automation & Control Rapid Modeling Transparent Meshing Automated Simulation Best Practice Settings CAE Specialist Designer Application Engineer Flexible Controls Full Solution Control Advanced Meshing Customization Simulation Control 2011 ANSYS, Inc. All rights reserved. 16 ANSYS, Inc. Proprietary
17 Underlying Technology : CFD ANSYS has 2 CFD codes in its portfolio, CFX and FLUENT 2011 ANSYS, Inc. All rights reserved. 17 ANSYS, Inc. Proprietary
18 Underlying Technology : CFD ANSYS has 2 CFD codes in its portfolio, CFX and FLUENT These codes enable the simulation of flows that are: Single-Phase Steady pump and valve flows 2011 ANSYS, Inc. All rights reserved. 18 ANSYS, Inc. Proprietary
19 Underlying Technology : CFD ANSYS has 2 CFD codes in its portfolio, CFX and FLUENT These codes enable the simulation of flows that are: Single-Phase Multiple Species Smoke dispersion in atrium of large building Courtesy of RWDI, Inc., Guelph, Canada 2011 ANSYS, Inc. All rights reserved. 19 ANSYS, Inc. Proprietary
20 Underlying Technology : CFD ANSYS has 2 CFD codes in its portfolio, CFX and FLUENT These codes enable the simulation of flows that are: Single-Phase Multiple Species Multiphase Ice Build-Up on Leading Edge Inducer flow with thermal cavitation 2011 ANSYS, Inc. All rights reserved. 20 ANSYS, Inc. Proprietary
21 Underlying Technology : CFD ANSYS has 2 CFD codes in its portfolio, CFX and FLUENT These codes enable the simulation of flows that are: Single-Phase Multiple Species Multiphase Turbulent Flows 2011 ANSYS, Inc. All rights reserved. 21 ANSYS, Inc. Proprietary
22 Underlying Technology : CFD ANSYS has 2 CFD codes in its portfolio, CFX and FLUENT These codes enable the simulation of flows that are: Single-Phase Multiple Species Multiphase Turbulent Flows Particle-laden flows Droplet Flow in a Scrubber 2011 ANSYS, Inc. All rights reserved. 22 ANSYS, Inc. Proprietary
23 Underlying Technology : CFD ANSYS has 2 CFD codes in its portfolio, CFX and FLUENT These codes enable the simulation of flows that are: Single-Phase Multiple Species Multiphase Turbulent Flows Particle-laden flows Heat transfer can be included from: Thermal Conduction in a solid Heat Transfer in a Manifold 2011 ANSYS, Inc. All rights reserved. 23 ANSYS, Inc. Proprietary
24 Underlying Technology : CFD ANSYS has 2 CFD codes in its portfolio, CFX and FLUENT These codes enable the simulation of flows that are: Single-Phase Multiple Species Multiphase Turbulent Flows Particle-laden flows Heat transfer can be included from: Thermal Conduction in a solid Thermal Radiation Thermal Radiation in an Automotive Headlight 2011 ANSYS, Inc. All rights reserved. 24 ANSYS, Inc. Proprietary
25 Underlying Technology : CFD ANSYS has 2 CFD codes in its portfolio, CFX and FLUENT These codes enable the simulation of flows that are: Single-Phase Multiple Species Multiphase Turbulent Flows Particle-laden flows Heat transfer can be included from: Thermal Conduction in a solid Thermal Radiation Internal Heat Generation Temperatures in a Fuel Transport Cask 2011 ANSYS, Inc. All rights reserved. 25 ANSYS, Inc. Proprietary
26 Underlying Technology : FEA ANSYS has 4 codes that include FEA technology in its portfolio: ANSYS Mechanical, ANSYS AUTODYN, ANSYS Explicit STR ANSYS LS-DYNA 2011 ANSYS, Inc. All rights reserved. 26 ANSYS, Inc. Proprietary
27 Underlying Technology : FEA ANSYS has 4 codes that include FEA technology in its portfolio: ANSYS Mechanical, ANSYS AUTODYN, ANSYS Explicit STR ANSYS LS-DYNA These codes enable the simulation of structures with: Beam Elements 2011 ANSYS, Inc. All rights reserved. 27 ANSYS, Inc. Proprietary
28 Underlying Technology : FEA ANSYS has 4 codes that include FEA technology in its portfolio: ANSYS Mechanical, ANSYS AUTODYN, ANSYS Explicit STR ANSYS LS-DYNA These codes enable the simulation of structures with: Beam-Elements Full 3D Stress Analysis Stress distribution in a valve, during a transient analysis of a shutdown event Courtesy Structural Integrity Associates 2011 ANSYS, Inc. All rights reserved. 28 ANSYS, Inc. Proprietary
29 Underlying Technology : FEA ANSYS has 4 codes that include FEA technology in its portfolio: ANSYS Mechanical, ANSYS AUTODYN, ANSYS Explicit STR ANSYS LS-DYNA These codes enable the simulation of structures with: Beam-Elements Full 3D Stress Analysis Multibody Dynamics 2011 ANSYS, Inc. All rights reserved. 29 ANSYS, Inc. Proprietary
30 Underlying Technology : FEA ANSYS has 4 codes that include FEA technology in its portfolio: ANSYS Mechanical, ANSYS AUTODYN, ANSYS Explicit STR ANSYS LS-DYNA These codes enable the simulation of structures with: Beam-Elements Full 3D Stress Analysis Multibody Dynamics Multiphysics Image courtesy of CADFEM GmbH / Elektromoterenwerk Grunhain GmbH & Co KG 2011 ANSYS, Inc. All rights reserved. 30 ANSYS, Inc. Proprietary
31 Underlying Technology : FEA ANSYS has 4 codes that include FEA technology in its portfolio: ANSYS Mechanical, ANSYS AUTODYN, ANSYS Explicit STR ANSYS LS-DYNA These codes enable the simulation of structures with: Beam-Elements Full 3D Stress Analysis Multibody Dynamics Multiphysics Modal Analysis (inc new Supernode Solver ) Impeller four-nodal diameter mode associated with its first natural frequency; this value, 141 Hz, is close to other vibrational frequencies of the global system. Courtesy Riello SPA 2011 ANSYS, Inc. All rights reserved. 31 ANSYS, Inc. Proprietary
32 Underlying Technology : FEA ANSYS has 4 codes that include FEA technology in its portfolio: ANSYS Mechanical, ANSYS AUTODYN, ANSYS Explicit STR ANSYS LS-DYNA These codes enable the simulation of structures with: Beam-Elements Full 3D Stress Analysis Multibody Dynamics Multiphysics Seismic Analysis Composites A liquid-hauling tank and associated structures of the truck were analysed. The truck's tank was made of filamentwound composites and sandwich structures. Courtesy Componeering Inc ANSYS, Inc. All rights reserved. 32 ANSYS, Inc. Proprietary
33 Underlying Technology : FEA ANSYS has 4 codes that include FEA technology in its portfolio: ANSYS Mechanical, ANSYS AUTODYN, ANSYS Explicit STR ANSYS LS-DYNA These codes enable the simulation of structures with: Beam-Elements Full 3D Stress Analysis Multibody Dynamics Multiphysics Seismic Analysis Composites High Speed Impact 2011 ANSYS, Inc. All rights reserved. 33 ANSYS, Inc. Proprietary
34 Inter-Connectivity of these Codes The ANSYS products are integrated into ANSYS Workbench, and are readily able to pass data (geometry / mesh / results) between the different products ANSYS, Inc. All rights reserved. 34 ANSYS, Inc. Proprietary
35 Summary ANSYS tools offer both an unequalled breadth of application areas (Fluid Dynamics, FEA, etc)... And an unparalled depth, enabling the most complex of underlying physics to be incorporated These tools are all integrated in the Workbench environment 2011 ANSYS, Inc. All rights reserved. 35 ANSYS, Inc. Proprietary
Overview. also give you an idea of ANSYS capabilities. In this chapter, we will define Finite Element Analysis and. Topics covered: B.
2. FEA and ANSYS FEA and ANSYS Overview In this chapter, we will define Finite Element Analysis and also give you an idea of ANSYS capabilities. Topics covered: A. What is FEA? B. About ANSYS FEA and ANSYS
Titelmasterformat durch Klicken bearbeiten
Titelmasterformat durch Klicken bearbeiten ANSYS AIM Product simulation for every engineer Erke Wang CADFEM GmbH Georg Scheuerer ANSYS Germany GmbH Christof Gebhardt CADFEM GmbH All products involve multiple
ME6130 An introduction to CFD 1-1
ME6130 An introduction to CFD 1-1 What is CFD? Computational fluid dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
CastNet: Modelling platform for open source solver technology
CastNet: Modelling platform for open source solver technology. DHCAE Tools GmbH Address: Friedrich-Ebert-Str. 368, 47800 Krefeld, Germany / Company site: Alte Rather Str. 207 / 47802 Krefeld Phone +49
Customer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved.
Lecture 2 Introduction to CFD Methodology Introduction to ANSYS FLUENT L2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions,
Graduate Courses in Mechanical Engineering
Graduate Courses in Mechanical Engineering MEEG 501 ADVANCED MECHANICAL ENGINEERING ANALYSIS An advanced, unified approach to the solution of mechanical engineering problems, with emphasis on the formulation
Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology
Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry
CCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future
. CCTech TM Simulation is The Future ICEM-CFD & FLUENT Software Training Course Brochure About. CCTech Established in 2006 by alumni of IIT Bombay. Our motive is to establish a knowledge centric organization
O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM. Darmstadt, 27.06.2012
O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM Darmstadt, 27.06.2012 Michael Ehlen IB Fischer CFD+engineering GmbH Lipowskystr. 12 81373 München Tel. 089/74118743 Fax 089/74118749
HPC Deployment of OpenFOAM in an Industrial Setting
HPC Deployment of OpenFOAM in an Industrial Setting Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom PRACE Seminar: Industrial Usage of HPC Stockholm, Sweden, 28-29 March 2011 HPC Deployment
Open Source CFD Solver - OpenFOAM
Open Source CFD Solver - OpenFOAM Wang Junhong (HPC, Computer Centre) 1. INTRODUCTION The OpenFOAM (Open Field Operation and Manipulation) Computational Fluid Dynamics (CFD) Toolbox is a free, open source
CFD Applications using CFD++ Paul Batten & Vedat Akdag
CFD Applications using CFD++ Paul Batten & Vedat Akdag Metacomp Products available under Altair Partner Program CFD++ Introduction Accurate multi dimensional polynomial framework Robust on wide variety
Rapid Design of an optimized Radial Compressor using CFturbo and ANSYS
Rapid Design of an optimized Radial Compressor using CFturbo and ANSYS Enrique Correa, Marius Korfanty, Sebastian Stübing CFturbo Software & Engineering GmbH, Dresden (Germany) PRESENTATION TOPICS 1. Company
TwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations
TwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations 05.06.2014 Dipl.-Ing. Jan Hesse, Dr. Andreas Spille-Kohoff CFX Berlin Software GmbH Karl-Marx-Allee 90 A 10243
Simulation of Fluid-Structure Interactions in Aeronautical Applications
Simulation of Fluid-Structure Interactions in Aeronautical Applications Martin Kuntz Jorge Carregal Ferreira ANSYS Germany D-83624 Otterfing Martin.Kuntz@ansys.com December 2003 3 rd FENET Annual Industry
Simulation Analysis Optimisation. Computer Aided Engineering
Simulation Analysis Optimisation Computer Aided Engineering Computer Aided Engineering Simulation Analysis Optimisation Simulation Analysis Optimisation Increasing demands on new products in terms of functionality,
Thermo-Mechanical Coupled Simulation with LS-DYNA
DYNAmore GmbH Industriestraße 2, D-70565 Stuttgart andrea.erhart@dynamore.de www.dynamore.de Ingenieurbüro Tobias Loose Herdweg 13, D-75045 Wössingen Lkr. Karlsruhe loose@tl-ing.de www.loose.at Thermo-Mechanical
Aerospace Systems. Industry Spotlight
4 Aerospace Systems Engineering simulation is an integral part of the development process for critical components and major subsystems on today s aircraft from nose to tail. By Simon Pereira Senior Application
FloEFD TM. Concurrent CFD for Creo Parametric. www.mentor.com
FloEFD TM Concurrent CFD for Creo Parametric M e c h a n i c a l a n a l y s i s Overview FloEFD for Creo Parametric is the only fully embedded Computational Fluid Dynamics (CFD) tool for Creo Parametric.
Simulation im Bereich der Windenergie ein Überblick. Dipl.-Ing. (FH) Nathalie Mattwich, CADFEM GmbH Dipl.-Phys. oec Stephan Hecht, ANSYS Germany GmbH
Simulation im Bereich der Windenergie ein Überblick Dipl.-Ing. (FH) Nathalie Mattwich, CADFEM GmbH Dipl.-Phys. oec Stephan Hecht, ANSYS Germany GmbH Agenda Uhrzeit Thema Referent 16:00 16:30 Simulation
SOLIDWORKS SIMULATION GET DESIGN INSIGHTS TO DRIVE MARKET WINNING INNOVATION
SOLIDWORKS SIMULATION GET DESIGN INSIGHTS TO DRIVE MARKET WINNING INNOVATION SOPHISTICATED SIMULATION IS NO LONGER JUST FOR SPECIALISTS What if? It s the inspiration that fuels innovation and with SolidWorks
Aerodynamic Department Institute of Aviation. Adam Dziubiński CFD group FLUENT
Adam Dziubiński CFD group IoA FLUENT Content Fluent CFD software 1. Short description of main features of Fluent 2. Examples of usage in CESAR Analysis of flow around an airfoil with a flap: VZLU + ILL4xx
Computational Fluid Dynamics in Automotive Applications
Computational Fluid Dynamics in Automotive Applications Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom FSB, University of Zagreb, Croatia 1/15 Outline Objective Review the adoption of Computational
Introduction to CFD Analysis
Introduction to CFD Analysis Introductory FLUENT Training 2006 ANSYS, Inc. All rights reserved. 2006 ANSYS, Inc. All rights reserved. 2-2 What is CFD? Computational fluid dynamics (CFD) is the science
CFD modelling of floating body response to regular waves
CFD modelling of floating body response to regular waves Dr Yann Delauré School of Mechanical and Manufacturing Engineering Dublin City University Ocean Energy Workshop NUI Maynooth, October 21, 2010 Table
Fully Automatic In-cylinder Workflow Using HEEDS / es-ice / STAR-CD
Fully Automatic In-cylinder Workflow Using HEEDS / es-ice / STAR-CD Simon Fischer Senior ICE Application Support Engineer CD-adapco Nuremberg Office Gerald Schmidt Director/Powertrain - CD-adapco New York
Workshop plan. From zero to results
Lecture-0 ANSYS in how to start From zero to results 2014 W0-1 Schedule WEiP Workshop plan Week 1 - Quick start in ANSYS Week 2 Geometry DesignModeler (DM) Week 3 Mesh Meshing Week 4 Solver FLUENT/CFX
Turbulence Modeling in CFD Simulation of Intake Manifold for a 4 Cylinder Engine
HEFAT2012 9 th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 16 18 July 2012 Malta Turbulence Modeling in CFD Simulation of Intake Manifold for a 4 Cylinder Engine Dr MK
NUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES
Vol. XX 2012 No. 4 28 34 J. ŠIMIČEK O. HUBOVÁ NUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES Jozef ŠIMIČEK email: jozef.simicek@stuba.sk Research field: Statics and Dynamics Fluids mechanics
Introduction to CFD Analysis
Introduction to CFD Analysis 2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
GT2011 46090 ANALYSIS OF A MICROGASTURBINE FED BY NATURAL GAS AND SYNTHESIS GAS: MGT TEST BENCH AND COMBUSTOR CFD ANALYSIS
ASME Turbo Expo 2011 June 6 10, 2011 Vancouver, Canada GT 2011 46090 ANALYSIS OF A MICROGASTURBINE FED BY NATURAL GAS AND SYNTHESIS GAS: MGT TEST BENCH AND COMBUSTOR CFD ANALYSIS M. Cadorin 1,M. Pinelli
FLUID FLOW ANALYSIS OF CENTRIFUGAL FAN BY USING FEM
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 2, March-April 2016, pp. 45 51, Article ID: IJMET_07_02_007 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=2
imaginit.com/autodeskcfd Scalable, robust fluid flow and thermal simulation solution
Scalable, robust fluid flow and thermal simulation solution Fast, accurate, and flexible solution to test the fluid flow and thermal performance of your design Accurately predict behavior, optimize designs,
Distance Learning Program
Distance Learning Program Leading To Master of Engineering or Master of Science In Mechanical Engineering Typical Course Presentation Format Program Description Clarkson University currently offers a Distance
Lecture 6 - Boundary Conditions. Applied Computational Fluid Dynamics
Lecture 6 - Boundary Conditions Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (2002-2006) Fluent Inc. (2002) 1 Outline Overview. Inlet and outlet boundaries.
Finite Element Method (ENGC 6321) Syllabus. Second Semester 2013-2014
Finite Element Method Finite Element Method (ENGC 6321) Syllabus Second Semester 2013-2014 Objectives Understand the basic theory of the FEM Know the behaviour and usage of each type of elements covered
DISTANCE DEGREE PROGRAM CURRICULUM NOTE:
Bachelor of Science in Electrical Engineering DISTANCE DEGREE PROGRAM CURRICULUM NOTE: Some Courses May Not Be Offered At A Distance Every Semester. Chem 121C General Chemistry I 3 Credits Online Fall
OpenFOAM Optimization Tools
OpenFOAM Optimization Tools Henrik Rusche and Aleks Jemcov h.rusche@wikki-gmbh.de and a.jemcov@wikki.co.uk Wikki, Germany and United Kingdom OpenFOAM Optimization Tools p. 1 Agenda Objective Review optimisation
CFD: What is it good for?
CFD: What is it good for? Tom O Mahoney TNO Fluid Dynamics Introduction to CFD CFD - Computational Fluid Dynamics Computational the using of computers to simulate the physics of fluids Fluid Either gas
TWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW
TWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW Rajesh Khatri 1, 1 M.Tech Scholar, Department of Mechanical Engineering, S.A.T.I., vidisha
Computational Fluid Dynamics (CFD) and Multiphase Flow Modelling. Associate Professor Britt M. Halvorsen (Dr. Ing) Amaranath S.
Computational Fluid Dynamics (CFD) and Multiphase Flow Modelling Associate Professor Britt M. Halvorsen (Dr. Ing) Amaranath S. Kumara (PhD Student), PO. Box 203, N-3901, N Porsgrunn, Norway What is CFD?
High-end FEA pre/postprocessor
Advanced FEM: High-end FEA pre/postprocessor NX CAE Benefits Speed analysis modeling processes by up to 70 percent Increase product quality by rapidly simulating design trade-off studies Lower overall
Application of ANSYS in the Simulation of IEC Type Tests Applied to Low and Medium Voltage Switchboards
Application of ANSYS in the Simulation of IEC Type Tests Applied to Low and Medium Voltage Switchboards MSO INDUSTRIAL Soluciones Avanzadas de Ingeniería MSO Industrial offers Specialized technical advice
OpenFOAM Opensource and CFD
OpenFOAM Opensource and CFD Andrew King Department of Mechanical Engineering Curtin University Outline What is Opensource Software OpenFOAM Overview Utilities, Libraries and Solvers Data Formats The CFD
Simulation Techniques for Tablet and Mobile Phone Design Bill McGinn; Ansys Senior Application Engineer
Simulation Techniques for Tablet and Mobile Phone Design Bill McGinn; Ansys Senior Application Engineer 1 Tablets in our daily lives Tablets are very entertaining, stylish and powerful Shopping, reading,
Introductory FLUENT Training
Chapter 10 Transient Flow Modeling Introductory FLUENT Training www.ptecgroup.ir 10-1 Motivation Nearly all flows in nature are transient! Steady-state assumption is possible if we: Ignore transient fluctuations
Multiphase Flow - Appendices
Discovery Laboratory Multiphase Flow - Appendices 1. Creating a Mesh 1.1. What is a geometry? The geometry used in a CFD simulation defines the problem domain and boundaries; it is the area (2D) or volume
Motor-CAD Software for Thermal Analysis of Electrical Motors - Links to Electromagnetic and Drive Simulation Models
Motor-CAD Software for Thermal Analysis of Electrical Motors - Links to Electromagnetic and Drive Simulation Models Dave Staton, Douglas Hawkins and Mircea Popescu Motor Design Ltd., Ellesmere, Shropshire,
THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA
THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA Adam Kosík Evektor s.r.o., Czech Republic KEYWORDS CFD simulation, mesh generation, OpenFOAM, ANSA ABSTRACT In this paper we describe
Dynamic Process Modeling. Process Dynamics and Control
Dynamic Process Modeling Process Dynamics and Control 1 Description of process dynamics Classes of models What do we need for control? Modeling for control Mechanical Systems Modeling Electrical circuits
CONVERGE Features, Capabilities and Applications
CONVERGE Features, Capabilities and Applications CONVERGE CONVERGE The industry leading CFD code for complex geometries with moving boundaries. Start using CONVERGE and never make a CFD mesh again. CONVERGE
Ryan F. Schkoda, Ph.D. Postdoctoral Fellow Wind Turbine Drivetrain Testing Facility Charleston, SC
Systems Engineering Activities at Clemson University s International Center for Automotive Research (CU-ICAR) and Wind Turbine Drivetrain Testing Facility Ryan F. Schkoda, Ph.D. Postdoctoral Fellow Wind
Siemens PLM Software FEMAP. Powering today s most advanced engineering analysis environment. siemens.com/plm/femap
Siemens PLM Software FEMAP Powering today s most advanced engineering analysis environment siemens.com/plm/femap Best-in-class digital simulation Why digital simulation? Industry pressure to reduce costs
Computational Fluid Dynamics Research Projects at Cenaero (2011)
Computational Fluid Dynamics Research Projects at Cenaero (2011) Cenaero (www.cenaero.be) is an applied research center focused on the development of advanced simulation technologies for aeronautics. Located
Consulting, Engineering & Managed Service Provider
Consulting, Engineering & Managed Service Provider A Joint Venture Company Together Making a difference Introduction Genesis of AeroEuro: A Joint Venture between Punj Lloyd Group, India and GECI, France
Titelmasterformat durch Klicken bearbeiten
Titelmasterformat durch Klicken bearbeiten Stefan Trometer, CADFEM GmbH Exploring Urban Simulation Semantic 3D City Models 3D city model of Frankfurt Generated and hosted by virtualcitysystems CityGML
Technology Update: Workbench, Geometry, Meshing, Workflow. ANSYS Users Group Meeting Prague, 2011
Technology Update: Workbench, Geometry, Meshing, Workflow ANSYS Users Group Meeting Prague, 2011 1 Andreas Kolms Hannover 2 Agenda Workbench Geometry Meshing Workflow 3 The Path to Robust Design Optimization
How To Model With Cfd Using Phoenics
The Use and Application of CFD in the Air Conditioning and Fire Protection Industry AIRAH NSW February 2008 The Use and Application of CFD in the Air Conditioning and Fire Protection Industry An Introduction
Application of FEM-Tools in the Engine Development Process
Application of FEM-Tools in the Engine Development Process H. Petrin, B. Wiesler e-mail: helmut.petrin@avl.com, bruno.wiesler@avl.com AVL List GmbH Graz, Austria Abstract The requirements for the development
Fluid structure interaction of a vibrating circular plate in a bounded fluid volume: simulation and experiment
Fluid Structure Interaction VI 3 Fluid structure interaction of a vibrating circular plate in a bounded fluid volume: simulation and experiment J. Hengstler & J. Dual Department of Mechanical and Process
2.1 CFD PROJECT PLANNING. 2006 ANSYS, Inc. All rights reserved. ANSYS, Inc. Proprietary
2.1 CFD PROJECT PLANNING 2006 ANSYS, Inc. All rights reserved. 2008 ANSYS, Inc. All rights reserved. 6-2 CFD PROJECT PLANNING Task definition Resources Timing and deliverables Design review Assumed part
Introduction to ANSYS
Lecture 3 Introduction to ANSYS Meshing 14. 5 Release Introduction to ANSYS Meshing 2012 ANSYS, Inc. March 27, 2014 1 Release 14.5 Introduction to ANSYS Meshing What you will learn from this presentation
CAE -Finite Element Method
16.810 Engineering Design and Rapid Prototyping Lecture 3b CAE -Finite Element Method Instructor(s) Prof. Olivier de Weck January 16, 2007 Numerical Methods Finite Element Method Boundary Element Method
CastNet: GUI environment for OpenFOAM
CastNet: GUI environment for OpenFOAM CastNet is a preprocessing system and job-control system for OpenFOAM. CastNet works with the standard OpenFOAM releases provided by ESI Group as well as ports for
CFD Based Air Flow and Contamination Modeling of Subway Stations
CFD Based Air Flow and Contamination Modeling of Subway Stations Greg Byrne Center for Nonlinear Science, Georgia Institute of Technology Fernando Camelli Center for Computational Fluid Dynamics, George
Course Outline for the Masters Programme in Computational Engineering
Course Outline for the Masters Programme in Computational Engineering Compulsory Courses CP-501 Mathematical Methods for Computational 3 Engineering-I CP-502 Mathematical Methods for Computational 3 Engineering-II
HydrOcean, your numerical hydrodynamic partner
HydrOcean, your numerical hydrodynamic partner Contact: Luke Berry, Account Manager Luke.berry@hydrocean.fr Tel: +33 (0)2 40 20 60 94 Who We Are Overview Founded in 2007 by E. Jacquin Spinoff from Ecole
2014.10.10. Measurement and Prediction Technology of Cooling Capability for Hybrid Drivetrain Components. Tadashi Yamada TOYOTA MOTOR CORPORATION
2014.10.10 Measurement and Prediction Technology of Cooling Capability for Hybrid Drivetrain Components Tadashi Yamada TOYOTA MOTOR CORPORATION Contents 1, Introduction 2, Cooling mechanism of the Hybrid
Enterprise HPC & Cloud Computing for Engineering Simulation. Barbara Hutchings Director, Strategic Partnerships ANSYS, Inc.
Enterprise HPC & Cloud Computing for Engineering Simulation Barbara Hutchings Director, Strategic Partnerships ANSYS, Inc. Historical Perspective Evolution of Computing for Simulation Pendulum swing: Centralized
Safakcan Tuncdemir 1, William M. Bradley *2. 1. Introduction
Modeling and Experimental Verification of the Power Transfer and Thermal Characteristics of Piezoelectric Transformers Subjected to Combined Mechanical and Electrical Loading Safakcan Tuncdemir 1, William
ADVANCED TOOL FOR FLUID DYNAMICS- CFD AND ITS APPLICATIONS IN AUTOMOTIVE, AERODYNAMICS AND MACHINE INDUSTRY
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 2, March-April 2016, pp. 177 186, Article ID: IJMET_07_02_019 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=2
CFD Application on Food Industry; Energy Saving on the Bread Oven
Middle-East Journal of Scientific Research 13 (8): 1095-1100, 2013 ISSN 1990-9233 IDOSI Publications, 2013 DOI: 10.5829/idosi.mejsr.2013.13.8.548 CFD Application on Food Industry; Energy Saving on the
CAE - CFD & FEA Manufacturing Support Value Engineering
Mechanical Design Services Reverse Engineering & Rapid Prototyping CAE - CFD & FEA Manufacturing Support Value Engineering Automotive Engineering Services ISO 9001 ISO 22301 ISO/IEC 27001 Product Life-Cycle
3. Prescribe boundary conditions at all boundary Zones:
CFD ANALYSIS OF CHANGE IN SHAPE OF SUCTION MANIFOLD TO IMPROVE PERFORMANCE OF THE CENTRIFUGAL PUMP ABSTRACT Mr. Suraj K. Patil PG Student, Department of Mechanical Engineering /BIGCE, Solapur University,
Modeling of Earth Surface Dynamics and Related Problems Using OpenFOAM
CSDMS 2013 Meeting Modeling of Earth Surface Dynamics and Related Problems Using OpenFOAM Xiaofeng Liu, Ph.D., P.E. Assistant Professor Department of Civil and Environmental Engineering University of Texas
Virtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim
Virtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim Joel Tollefson Imagine Inc. Aerospace Business Development Hans Van den Wijngaert LMS Product Manager Motion
FINE TM /Marine. CFD Suite for Marine Applications. Advanced Development for Better Products. www.numeca.com
FINE TM /Marine CFD Suite for Marine Applications Advanced Development for Better Products www.numeca.com FINE TM /Marine FINE /Marine is a unique integrated CFD software environment for the simulation
COMPUTATIONAL FLUID DYNAMICS USING COMMERCIAL CFD CODES
ME469B - Spring 2007 COMPUTATIONAL FLUID DYNAMICS USING COMMERCIAL CFD CODES Gianluca Iaccarino Dept. Mechanical Engineering Bldg. 500 RM 204 (RM500-I) Ph. 650-723-9599 Email: jops@stanford.edu ME469B/1/GI
Finite Element Method
16.810 (16.682) Engineering Design and Rapid Prototyping Finite Element Method Instructor(s) Prof. Olivier de Weck deweck@mit.edu Dr. Il Yong Kim kiy@mit.edu January 12, 2004 Plan for Today FEM Lecture
INTERACTION OF LIQUID MOTION ON MOBILE TANK STRUCTURE
Journal of KONES Powertrain and Transport, Vol. 18, No. 3 2011 INTERACTION OF LIQUID MOTION ON MOBILE TANK STRUCTURE Mariusz Domaga a, Edward Lisowski Cracow University of Technology, Department of Mechanical
CAE -Finite Element Method
16.810 Engineering Design and Rapid Prototyping CAE -Finite Element Method Instructor(s) Prof. Olivier de Weck January 11, 2005 Plan for Today Hand Calculations Aero Æ Structures FEM Lecture (ca. 45 min)
Advanced discretisation techniques (a collection of first and second order schemes); Innovative algorithms and robust solvers for fast convergence.
New generation CFD Software APUS-CFD APUS-CFD is a fully interactive Arbitrary Polyhedral Unstructured Solver. APUS-CFD is a new generation of CFD software for modelling fluid flow and heat transfer in
CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER
International Journal of Advancements in Research & Technology, Volume 1, Issue2, July-2012 1 CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER ABSTRACT (1) Mr. Mainak Bhaumik M.E. (Thermal Engg.)
Heat Transfer and Thermal-Stress Analysis with Abaqus
Heat Transfer and Thermal-Stress Analysis with Abaqus 2016 About this Course Course objectives Upon completion of this course you will be able to: Perform steady-state and transient heat transfer simulations
Computational Fluid Dynamic Modeling Applications
Computational Fluid Dynamic Modeling Applications Canadian Heavy Oil Conference Dr. Marvin Weiss What is CFD Computational Fluid Dynamics Colorful Fluid Dynamics Colors For Directors Carefully Fitted Data
The simulation of machine tools can be divided into two stages. In the first stage the mechanical behavior of a machine tool is simulated with FEM
1 The simulation of machine tools can be divided into two stages. In the first stage the mechanical behavior of a machine tool is simulated with FEM tools. The approach to this simulation is different
Aeroelastic Investigation of the Sandia 100m Blade Using Computational Fluid Dynamics
Aeroelastic Investigation of the Sandia 100m Blade Using Computational Fluid Dynamics David Corson Altair Engineering, Inc. Todd Griffith Sandia National Laboratories Tom Ashwill (Retired) Sandia National
Overset Grids Technology in STAR-CCM+: Methodology and Applications
Overset Grids Technology in STAR-CCM+: Methodology and Applications Eberhard Schreck, Milovan Perić and Deryl Snyder eberhard.schreck@cd-adapco.com milovan.peric@cd-adapco.com deryl.snyder@cd-adapco.com
Dr.A.K.Shaik Dawood. N.V.Kamalesh. Department of Mechanical Engineering, Associate Professor, Karpagam University, Coimbatore 641202, India.
CFD Analysis of cooling channels in built-in motorized high speed spindle K.MadhanMuthuGanesh Department of Mechanical Engineering, Research scholar, PSG College of Technology, Coimbatore 641107, India.
COMPUTATIONAL ENGINEERING OF FINITE ELEMENT MODELLING FOR AUTOMOTIVE APPLICATION USING ABAQUS
International Journal of Advanced Research in Engineering and Technology (IJARET) Volume 7, Issue 2, March-April 2016, pp. 30 52, Article ID: IJARET_07_02_004 Available online at http://www.iaeme.com/ijaret/issues.asp?jtype=ijaret&vtype=7&itype=2
SGI HPC Systems Help Fuel Manufacturing Rebirth
SGI HPC Systems Help Fuel Manufacturing Rebirth Created by T A B L E O F C O N T E N T S 1.0 Introduction 1 2.0 Ongoing Challenges 1 3.0 Meeting the Challenge 2 4.0 SGI Solution Environment and CAE Applications
CFD software overview comparison, limitations and user interfaces
CFD software overview comparison, limitations and user interfaces Daniel Legendre Introduction to CFD Turku, 05.05.2015 Åbo Akademi University Thermal and Flow Engineering Laboratory 05.05.2015 1 Some
(Seattle is home of Boeing Jets)
Dr. Faeq M. Shaikh Seattle, Washington, USA (Seattle is home of Boeing Jets) 1 Pre Requisites for Today s Seminar Basic understanding of Finite Element Analysis Working Knowledge of Laminate Plate Theory
Multiphysics Software Applications in Reverse Engineering
Multiphysics Software Applications in Reverse Engineering *W. Wang 1, K. Genc 2 1 University of Massachusetts Lowell, Lowell, MA, USA 2 Simpleware, Exeter, United Kingdom *Corresponding author: University
Fire Simulations in Civil Engineering
Contact: Lukas Arnold l.arnold@fz- juelich.de Nb: I had to remove slides containing input from our industrial partners. Sorry. Fire Simulations in Civil Engineering 07.05.2013 Lukas Arnold Fire Simulations
CFD Simulation of Subcooled Flow Boiling using OpenFOAM
Research Article International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347-5161 2014 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet CFD
Computational Modeling of Wind Turbines in OpenFOAM
Computational Modeling of Wind Turbines in OpenFOAM Hamid Rahimi hamid.rahimi@uni-oldenburg.de ForWind - Center for Wind Energy Research Institute of Physics, University of Oldenburg, Germany Outline Computational
SOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS
SOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS SOLIDWORKS CAD Software Course Index Course Number Course Title Course Length 100 SOLIDWORKS
Part IV. Conclusions
Part IV Conclusions 189 Chapter 9 Conclusions and Future Work CFD studies of premixed laminar and turbulent combustion dynamics have been conducted. These studies were aimed at explaining physical phenomena
CFD Grows Up! Martin W. Liddament Ventilation, Energy and Environmental Technology (VEETECH Ltd) What is Computational Fluid Dynamics?
CIBSE/ASHRAE Meeting CFD Grows Up! Martin W. Liddament Ventilation, Energy and Environmental Technology (VEETECH Ltd) 10 th December 2003 What is Computational Fluid Dynamics? CFD is a numerical means