section 11 GENERAL HARDWARE

Size: px
Start display at page:

Download "section 11 GENERAL HARDWARE"

Transcription

1 section 11 GENERAL HARDWARE

2

3 11 GENERAL HARDWARE Worktop fittings 188 Wall brackets 191 Door stops 193 SHELF STUDS 193 LOCKS 196 CATCHES 198 BOLTS 201 castors 202 cable tidy 204

4 Worktop fittings Postform end classic profile Used for covering the raw ends on worktops Available in 3 colours Length: 630mm Easily cut to required length Suitable for classic formica worktop Postform end aluminum 30mm Postform end bronze 30mm Postform end black 30mm Postform end aluminum 40mm Postform end bronze 40mm Postform end black 40mm 10 Postform tee and tail classic profile Used to seal a joint between two lengths of worktop Straight joiners Suitable for use with 30mm and 40mm worktops, to cosmetically finish a joint Available in 3 colours Length: 630mm Easily cut to required length Suitable for classic formica worktop Postform tee with tail aluminum 30mm Postform tee with tail bronze 30mm Postform tee with tail black 30mm Postform tee with tail aluminum 40mm Postform tee with tail bronze 40mm Postform tee with tail black 40mm 10 Postform joiner classic profile Used for inserting in the gap where the edge of one worktop meets end of an adjacent worktop in a corner situation Available in 3 colours Length: 630mm Can be easily cut Suitable for classic formica worktop Postform joiner aluminum 30mm Postform joiner bronze 30mm Postform joiner black 30mm Postform joiner aluminum 40mm Postform joiner bronze 40mm Postform joiner black 40mm

5 11 GENERAL HARDWARE Postform end duropal profile Used for covering the raw ends on worktops Available in 3 colours Length: 630mm Easily cut to required length Suitable for duropal profile worktop Duropal postform end aluminium Duropal postform end bronze Duropal postform end black 10 Postform tee and tail duropal profile Used to seal a joint between two lengths of worktop Straight joiners Suitable for use with 30mm and 40mm worktops, to cosmetically finish a joint Available in 3 colours Length: 630mm Easily cut to required length Suitable for duropal profile worktop Duropal tee & tail aluminium Duropal tee & tail bronze Duropal tee & tail black 10 Postform joiner duropal profile Used for inserting in the gap where the edge of one worktop meets end of an adjacent worktop in a corner situation Available in 3 colours Length: 630mm Can be easily cut Suitable for duropal profile worktop Duropal postform joiner aluminium Duropal postform joiner bronze Duropal postform joiner black 10 Postform end square profile Used for covering the raw ends on worktops Available in 3 colours Length: 630mm Easily cut to required length Suitable for square profile worktop Square postform end aluminium 40mm Square postform end bronze 40mm Square postform end black 40mm

6 Postform tee and tail square profile Used to seal a joint between two lengths of worktop Straight joiners Suitable for use with 30mm and 40mm worktops, to cosmetically finish a joint Available in 3 colours Length: 630mm Easily cut to required length Suitable for square profile worktop Square postform tee & tail aluminium 40mm Square postform tee & tail bronze 40mm Square postform tee & tail black 40mm 10 Postform joiner square profile Used for inserting in the gap where the edge of one worktop meets end of an adjacent worktop in a corner situation Available in 3 colours Length: 630mm Can be easily cut Suitable for square profile worktop Square postform joiner aluminium 40mm Square postform joiner bronze 40mm Square postform joiner black 40mm 10 Gutter section For use in corner unit when two doors are meeting to avoid seeing a gap Available in 3 colours Length: 630mm Easy screw fixing on the back of door Gutter section aluminium Gutter section bronze Gutter section black 5 Worktop clamp Steel clamp for joining two lengths of worktop together Two 35mm diameter holes must be drilled at each worktop edge and a slot cut between the two holes The nut is then tightened to draw the two worktops together Finish: zinc plated Worktop clamps ZP 65mm Worktop clamps ZP 150mm

7 11 GENERAL HARDWARE Wall brackets Shelf bracket Adjustable shelf pelican bracket For glass or wood shelves 3mm to 40mm thick For shelves up to 250mm deep Typical applications include kitchen, bedroom and bathroom shelves Shelf clamp small size 50mm deep Shelf clamp medium size 75mm deep Shelf clamp large size 115mm deep 1 angle bracket No.225 Finish: zinc plated Dimensions: 19 x 25 x 25mm Angle bracket No mm 1000 angle bracket No.420 Finish: zinc plated Dimensions: 19 x 40 x 40mm or 19 x 50 x 50mm Angle bracket No mm Angle bracket No mm 100 Shrinking bracket Finish: zinc plated Dimensions: 29 x 25 x 25mm Shrinking bracket 250 Two way shrinking bracket Finish: zinc plated Dimensions: 37 x 32 x 19mm Shrinking bracket two way

8 Camar wall hanging bracket Horizontal adjustment up to 25mm Vertical adjustment up to 28mm Fixing system: screw fix Colour: cream Load capacity: up to 70kg Camar wall hanging bracket LH Camar wall hanging bracket RH Camar wall bracket LH Cover Cap Camar wall bracket RH Cover Cap 100 Wall hanging bracket universal Unhanded Cabinet hanger concealed behind rear panel, only cover cap visible inside the cabinet Slots into side cabinet by making 4 face boring and secured in position by rotating 180 the locking pin with ridges Vertical adjustments through front gear cross socket interconnected to vertical bolt, which reduces the cabinet adjustment effort Load carrying capacity: 130kg per pair Wall hanging bracket universal Wall hanging bracket mounting plate Wall hanging bracket cover cap 100 Wall unit bracket Finish: zinc plated, white or cream Dimensions: 64 x 64 x 1.2mm Wall unit bracket zinc plated Wall unit bracket cream Wall unit bracket white 50 Spacemaker Bracket A fold away shelf bracket for worktop or tables The small lever under the front edge allows the bracket to fold down Lightweight but strong Spacemaker bracket white 1 pair 192

9 11 GENERAL HARDWARE Handrail bracket Support for a handrail on a stairs One side fixes to the wall the other supports the hand rail Finish: brass or polished chrome Handrail bracket brass Handrail bracket polished chrome 10 Door stops Flexible door stop Finish: brass plate Easy one screw fixing Door stop flexible 50 PVC door wedge Made from rubber A simple wedge used to keep a door open Colour: white Door wedge PVC white 50 Door buffer Finish: transparent Dimensions: 3 x 10mm Self adhesive buffer to absorb the closing action of sprung hinges Door buffer clear 1000 SHELF STUDS nail in Shelf support Material: plastic and steel Finish: white, brown or cream Dimensions: 14mm diameter with a 19mm nail Shelf studs brown Shelf studs white Shelf studs light cream

10 Push In Shelf Support Material: plastic Finish: white, cream or brown Suitable for 5mm line boring Shelf studs 5mm white Shelf studs 5mm cream Shelf studs 5mm brown 1000 Retaining shelf stud Plastic shelf retaining clip To suit 18/19mm shelf thicknesses Fits a 5mm diameter hole Secures the shelf firmly in place which allows the unit to be moved with out the shelf dislodging Available colours: white or cream Retaining shelf stud white Retaining shelf studs cream 1000 Push in steel shelf stud Suitable for a 5mm hole Length of pin 8.5mm Shelf stud nickel 5mm 1000 Shelf stud with serrated pin Material steel Suitable for a 5mm hole Length of pin 8mm Serrated teeth on the pin prevents movement Shelf stud with serrated pin 5mm 1000 plastic Push in shelf stud Material plastic with metal pin Suitable for a 5mm hole Length of pin 8mm Push in shelf stud 5mm transparent

11 11 GENERAL HARDWARE Bookcase stud & socket Finish: electro brass plated Socket dimensions: 10mm Stud dimensions: 30 x 19 x 6mm Bookcase stud brass Bookcase socket brass 1000 Bookcase strip Finish: brass or nickel Usage: light duty adjustable shelving Dimensions: 1750 x 16 x 6mm Can be used as resessed or surface mounted Bookcase strip 1750mm brass Bookcase strip 1750mm nickel 10 Bookcase stud for 12mm strip Metal shelf clip for use with bookcase strip Looks very well in solid timber kitchens as an alternative to shelf supports Bookcase stud brass Bookcase stud nickel 100 Heavy Duty Shelving Bracket Material steel, powder coated Suitable for school projects, hospital projects or shop fitting The brackets are used in conjunction with the uprights 5 popular sizes available Heavy duty white shelving U bracket 220mm Heavy duty white shelving U bracket 270mm Heavy duty white shelving U bracket 320mm Heavy duty white shelving U bracket 365mm Heavy duty white shelving U bracket 470mm

12 Heavy Duty Shelving Upright Material steel, powder coated Suitable for school projects, hospital projects or shop fitting The uprights are used in conjunction with the brackets 6 popular lengths available Heavy duty white shelving upright 960mm Heavy duty white shelving upright 1280mm Heavy duty white shelving upright 1600mm Heavy duty white shelving upright 1920mm Heavy duty white shelving upright 2250mm Heavy duty white shelving upright 2400mm 1 LOCKS Coin lock A simple solution for swimming pools, leisure centres and golf clubs The key can not be removed until a euro coin is inserted The coin is then returned when the key is inserted Coin lock 1 cam lock Cam locks are one of the simplest of lock fastenings. A metal plate, the cam, is fixed to the lock s core and is rotated as the key rotates. This movement, typically through 90 or 180, is used to secure a door or flap Cam lock 12 Rim Lock with Master Key Finish: nickel plated Applications: drawers, wardrobes and cabinets Each lock comes complete with a rosette and two keys Cylinder diameter: 19mm Rim lock under master key

13 11 GENERAL HARDWARE Pedestal Lock Cylinder diameter: 19mm Used in conjunction with a locking bar for a pedestal unit When the key is turned the bar rises and locks the three drawers Eliminates the need multiple locks and keys drawer pedistal lock with fitting 12 Flap Lock Suitable for flap doors Key removable in locked and unlocked position Zamak lock boy and cylinder Steel rosette, striker and keys Finish: bronze plated Flap lock bronze 12 Cupboard lock Finish: electro brass plated Dimensions: 51 x 25mm or 63 x 32mm Cupboard lock brass 51mm Cupboard lock brass 63mm 25 Bow key A simple key for use with a cupboard lock Bow key brass No Keyed alike drawer lock Finish: nickel or brass Each lock comes in a box with two keys, a rosette, and a striking plate All the keys are the same combination Can be used for a wide variety of function including drawers, wardrobes and cabinets Drawer lock keyed alike brass Drawer lock keyed alike nickel

14 Keyed to differ drawer lock Finish: nickel or brass Each lock comes in a box with two keys, a rosette, and a striking plate All the keys have different combinations Can be used for a wide variety of function including drawers, wardrobes and cabinets Drawer lock keyed to differ brass Drawer lock keyed to differ nickel 12 Lock striking plate Finish: nickel plated Screw fixing Dimensions: 40 x 20mm Lock striking plates 100 master key for pedestal lock For use with pedestal lock Master key for pedestal lock 1 CATCHES Round magnetic screw catch with striking plate Finish: brown Suitable for framed door Catch dimensions: 23 x 20 x 20mm Plate dimensions: 10mm Pull: 1.6kg Round magnetic screw catch with striking plate

15 11 GENERAL HARDWARE Magnetic catch Simple magnetic catch screw fixing Pull: 4kg Comes complete with striking plate Available colours: white or brown Magnetic catches white 4kg Magnetic catches brown 4kg 50 Large magnetic catch Large magnetic catch screw fixing Pull: 6-8kg Comes complete with striking plate Available colours: white or brown Magnetic catch large white 6-8kg Magnetic catch large brown 6-8kg 50 Magnetic catch for framed doors Finish: chrome Catch dimensions: 45 x 16 x 16mm Striking plate dimensions: 40 x 10mm Pull: 6kg Super strength Magnetic catch chrome for framed doors 50 Child safety catch Fits to the inside of a cabinet or drawer front Helps prevent the cabinet or drawer being opened by a child To open, press lever and release catch White plastic Child safety catch 1 199

16 Roller catch Catch dimensions: 32 x 28 x 14mm Stop dimensions: 31 x 8 x 15mm Finish: bronze or zinc Pull: 1.4kg Roller catch bronze Roller catch zinc 100 Bales catch Finish: self coloured brass Commonly selected for high quality furniture manufacture where surface mounted catches would look obtrusive Size: 19mm Bales catch 19mm brass 50 Double ball catch Finish: self colour brass Size: 42mm or 50mm Catch dimensions: 50 x 10 x 9mm Stop dimensions: 37 x 8 x 10mm Pull: 2.2kg Double ball catch 42mm Double ball catch 50mm 50 Magnetic autolatch Finish: black Spring loaded magnetic catch with striking plate Catch dimensions: 45 x 28 x 16mm Plate dimensions: 35 x 13mm Pull: 2kg Autolatch magnetic black

17 11 GENERAL HARDWARE Touch latch Screw fixing Bright galvanized steel catch and counterpiece Opened by simply applying pressure to the door which activates the release spring in the catch Light finger pressure on the door is sufficient to close it again Suitable for inset, rebated and butt closing doors Touch latch silver 50 Samet Push To Open Catch Can be used with standard or reverse sprung hinges Can be countersunk or surface mounted with an adapter code Used for handless applications Samet push to open catch reciever (knock in) Samet push to open catch reciever (adhesive) Samet push to open catch 50 Suitcase catch Finish: nickel Dimensions: approx 81 x 45mm Suitcase catch nickel 50 BOLTS Barrel Bolt Finish: polished brass Straight barrel bolt with receiver Surface mounted Available in 4 sizes Barrel bolt brass 50mm Barrel bolt brass 63mm Barrel bolt brass 75mm Barrel bolt brass 100mm

18 Cabinet bolt Finish: electro brass plated Bolt dimensions: 70 x 22mm Catch dimensions: 20 x 12.5mm Cabinet bolt brass with stop 10 Necked bolt Material: brass Necked barrell bolt with stop Dimensions: 76 x 26mm Necked bolt brass 76mm 10 CASTORS Castor cup Used underneath castors to protect carpets and flooring Available in two sizes Castor cups brown small Castor cups brown large 50 Twin wheel plate castor Material: black plastic wheel with steel plate Dimensions: 40 x 40mm plate with 50mm wheel Max load: 30kg Twin wheel plate castor 50mm 100 Twin wheel plate castor with brake Material: black plastic wheel with steel plate Available with brake Dimensions: 40 x 40mm plate with 50mm wheel Max load: 30kg Twin wheel plate castor 50mm with brake

19 11 GENERAL HARDWARE Heavy Duty Castor Very durable castor perfect where extra strength is needed plate and stern on ball bearings with rubber wheel Wheel size: 50, 75 or 100mm Heavy duty castor 50mm Heavy duty castor 75mm Heavy duty castor 100mm 4 Heavy Duty Castor with brake Very durable castor perfect where extra strength is needed plate and stern on ball bearings with rubber wheel Available with brake Wheel size: 50, 75 or 100mm Heavy duty castor 50mm with brake Heavy duty castor 75mm with brake Heavy duty castor 100mm with brake 4 Corner castor Material: black plastic wheel with steel frame Suitable for furniture production Wheel size: 28mm Needs to be fixed using scews Corner castor steel type 100 plastic Corner castor A popular castor used in furniture production The plastic housing can be stapled on to the furniture for speed The castor then clicks in to the housing Once inserted the castor can not be removed Wheel size: 28mm Plastic corner castor

20 cable tidy Plastic cable tidy Size: 80mm Two part fitting with spring closing top Suitable for office furniture Used to keep computer leads and wires neat Available colours: grey, brown or black Cable tidy grey Cable tidy black Cable tidy brown 100 Metal cable tidy Size 80mm Two Part Fitting with rubber opening Suitable for office furniture Used to keep computer leads or wires neat Two finishes available Cable tidy brushed nickle Cable tidy brushed chrome

Glass & Glazing. Showcase & Display

Glass & Glazing. Showcase & Display Glass & Glazing Showcase & Display Shelf Brackets... Shelf Supports... 4 Shelf Rail... 7 Shelf Stripping... 8 Bracket Accessories... 9 Sliding Showcase System... 10 Sliding Glass Tracks... 11 LS Series

More information

Locking Systems, Locks, Catches and Safes Electronic Lokcs

Locking Systems, Locks, Catches and Safes Electronic Lokcs Electronic Lokcs Electronic keypunch lock Area of application: For doors opening right Material: Plastic housing Wood thickness: 12 16 mm Bolt length: 15 mm Order information Please order batteries, striking

More information

Every tape you want with the quality you need

Every tape you want with the quality you need Every tape you want with the quality you need EUROCEL is a well regarded and recognised manufacturer of high quality masking, protection, filament and packaging tapes. They suit a wide variety of industries

More information

Echelon - the ultimate modular bottle storage system

Echelon - the ultimate modular bottle storage system Echelon - the ultimate modular bottle storage system Why build standard wine bottle storage when you can create a central feature that will become a talking point? The Echelon modular bottle storage system

More information

SHELF & GLASS FITTINGS

SHELF & GLASS FITTINGS SHELF & GLASS FITTINGS -1 Glass Door Hinges P. 134-140 -2 Showcase Connectors P. 141-144 -3 Glass Shelf Supports & Fittings P. 145-153 -4 Shelf Supports & Fittings P. 154-159 -1 Glass Door Hinges 21825

More information

Brass Padlocks. Designed to fully complement other architectural products. Extensive range in a variety of sizes and finishes.

Brass Padlocks. Designed to fully complement other architectural products. Extensive range in a variety of sizes and finishes. Padlocks Auxiliary Hardware Brass Padlocks Designed to fully complement other architectural products. Extensive range in a variety of sizes and finishes. 400 Series Brass Padlocks Keying Information Standard

More information

Organisational Kitchen Fittings Kitchen Cabinet Fittings

Organisational Kitchen Fittings Kitchen Cabinet Fittings Pull-out wire storage basket Finish: Chrome plated Load capacity: 30 kg Installation depth: 400 mm Version: Runners and baskets separated, designed for wardrobe interiors without doors Type of pull out:

More information

Sliding and Folding Door Fittings Sliding Door Accessories

Sliding and Folding Door Fittings Sliding Door Accessories Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:

More information

Please refer to hard catalogue for details on hold open, delayed action types and finishes available.

Please refer to hard catalogue for details on hold open, delayed action types and finishes available. FIRE-RATED Applicable to Fire Latching Bolt only; not applicable to Brass Padlocks or Hinges. Fire Latching Bolt 4500/DL00SCF Deadlatching 70mm latchbolt for use with a pair of fire doors where door is

More information

overhead cabinet solutions flap fittings Brought to you by Häfele

overhead cabinet solutions flap fittings Brought to you by Häfele www.hafele.com.au overhead cabinet solutions flap fittings Brought to you by Häfele lift + turn - flap fittings / 732.98.682-04.14 The art of movement Overhead Flap Fittings engineered by Häfele All fittings

More information

Cabinet & Drawer Hardware

Cabinet & Drawer Hardware www.crh.com.au SOLUTIONS FOR TRDE Cabinet & Drawer Hardware www.crh.com.au SOLUTIONS FOR TRDE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19 Page 20 CRH Series

More information

HARDWARE. Drawer and Cabinet. The following pages offer a comprehensive selection of: Drawer and Cabinet Hardware R2-1 R-7125

HARDWARE. Drawer and Cabinet. The following pages offer a comprehensive selection of: Drawer and Cabinet Hardware R2-1 R-7125 R-7125 CCR-7125 The following pages offer a comprehensive selection of: Drawer and Cabinet HARDWARE R-7133 22- Track Length 1-3/16" R-7126 R-7125 CCR-7125 (30 per display box) Rolled Edge Drawer Track

More information

Hinges & Catches. Catches. Cushions & Liners

Hinges & Catches. Catches. Cushions & Liners Hinges & Catches Concealed Hinges Face Frame Hinges Non-Formed Hinges Single-Formed Hinges Two-Formed Hinges Three Formed Hinges Five-Formed Hinges Cylinder Hinges Drop Front Hinges Butt Hinges Cylinder

More information

Locks and Strike boxes

Locks and Strike boxes 49 Perfect function and modern design provides reassuring and reliable security for today s constructions in glass. CONTENTS Technical details - 55 Materials and surface finishes 56 Product information

More information

Interior Equipment/Shop Fittings Shop Fittings

Interior Equipment/Shop Fittings Shop Fittings Interior Equipment/ SHOPTEC Shopfitting system SHOPTEC is a highly flexible and universal shopfitting system. Various basic elements can be combined with each other, allowing the best possible use to be

More information

Connector Technology, Shelf Supports Shelf Supports

Connector Technology, Shelf Supports Shelf Supports Shelf supports made of steel For drilled hole Ø 3, load carrying capacity 60 kg Nickel plated 8.06.706 Brass plated 8.06.500 Packing: 500 or,000 pcs. Nickel plated 8.04.70 Brass plated 8.04.54 Packing:

More information

Hardware & Accessories

Hardware & Accessories Hardware & Accessories Assure that your installations and designs are completed in professional fashion by utilizing Stylmark s Hardware and Accessories. This catalog represents a collection of these items,

More information

Technical data for. Lock 4 Lever: Product code : 2333

Technical data for. Lock 4 Lever: Product code : 2333 Universal Furniture Lock 4 Lever Product Features:! 4 lever locking mechanism! A versatile and inexpensive lock that fits unobtrusively on drawers, boxes, cupboards and other wooden furniture! ABS plastic

More information

Wire Rope Grips. D shackles. Lynch pins

Wire Rope Grips. D shackles. Lynch pins Turnbuckles Size Wire Rope Grips Size 000000060 165mm (M8x110) 1 5391193193910 370003000 1/8 100 5391193197888 000000159 159mm (M6x110) 1 5391193193927 370005000 3/16 100 5391193197895 000010125 190mm

More information

section 2: HINGES section 1: HANDLES

section 2: HINGES section 1: HANDLES section 2: HINGES section 1: HANDLES 1 1 section 1: HANDLES bar handles................................................................ 2-2 traditional handles.................................................

More information

Hardware & Accessories

Hardware & Accessories Hardware & Accessories Innovation in aluminum and steel design For over five decades, Stylmark has been a leading manufacturer of aluminum and steel products for retail, hospitality, entertainment and

More information

BRIDGE HARDWARE (WHOLESALE SUPPLIES) Tel: Fax: PRODUCT GUIDE

BRIDGE HARDWARE (WHOLESALE SUPPLIES) Tel: Fax: PRODUCT GUIDE BRIDGE HARDWARE (WHOLESALE SUPPLIES) Tel: 01406 351249 Fax: 01406 351658 PRODUCT GUIDE IRONMONGERY, HASPS, BOLTS, HINGES, BRACKETS AND HOOKS CONTENTS PAGE 5 IRONMONGERY PAGE 1 PAGE 6 IRONMONGERY PAGE 2

More information

BATHROOM ACCESSORIES

BATHROOM ACCESSORIES B-672 SURFACE MOUNTED DOUBLE ROBE HOOK Contoured 102mm (4 in) wide bar forms hook at each end. Flange is 50 x 50mm (2 x 2 in). Bright-polished stainless steel. Projects 60mm (2 5 16 in) from wall. B-6727

More information

section 10 SCREWS, FIXINGS & KDs

section 10 SCREWS, FIXINGS & KDs section 10 SCREWS, FIXINGS & KDs 10 SCREWS, FIXINGS & KDs Screws 172 Screw accessories 175 Wall plugs 175 Hammer in fixings 176 KDs 177 Caps 179 Dowels 181 Drill bits 182 Fittings.......................................................................182

More information

See online for our FULL range

See online for our FULL range 01483 237621 GUILDFord sales@unico.uk.com Quality furniture fittings Espagnolette Mortice and Rim 3-4 5 Strikers, Coin & Code 6 Drawer & Cupboard 7-8 Cam 9 Pedestal Lock SysteMS 10 Glass Door 11-12 - Low

More information

1036 Parkway Ct. Phone: 770-932-0202 Buford, GA 30518 Fax: 770-945-0041

1036 Parkway Ct. Phone: 770-932-0202 Buford, GA 30518 Fax: 770-945-0041 CONSTRUCTION 1. A. GENERAL 1.A.1. The intent of this specification is to set forth construction and design standards that will result in an installation of modular cabinetry requiring FLUSH OVERLAY CONSTRUCTION.

More information

straight sliding bottom rolling door and gate hardware

straight sliding bottom rolling door and gate hardware straight sliding rolling door and gate hardware section index and general guide Select system for your application. max. door Product data sheet Channel and profiles - actual size - and accessories APPLICATION

More information

Magnetic Catch IPS INDUSTRIAL PROFILE SYSTEMS. Catalog 1816 Hardware

Magnetic Catch IPS INDUSTRIAL PROFILE SYSTEMS. Catalog 1816 Hardware Magnetic Catch 800--9-06 1 Holding Force X 0 N (. lb) Y 10 N (. lb) -01 1 Mounting on 0 series profile Mounting on 8 series profile Assembly of the Double Bracket 0 on 0 series profile Holding force of

More information

Finish with Style with the Finista range

Finish with Style with the Finista range Finish with Style with the Finista range Finish your next project with style by integrating the new Finista range of products from Lincoln Sentry. Finista is a range of stylish solutions for the kitchen,

More information

Sliding Door Gear. Double 60 Wardrobe sliding door gear. Finger Pull FOR TOP HUNG DOORS OPERATING ON A ONE-PIECE DOUBLE TRACK. DOORSTOP Nylon.

Sliding Door Gear. Double 60 Wardrobe sliding door gear. Finger Pull FOR TOP HUNG DOORS OPERATING ON A ONE-PIECE DOUBLE TRACK. DOORSTOP Nylon. Double 60 Wardrobe sliding door gear FOR TOP HUNG DOORS OPERATING ON A ONE-PIECE DOUBLE TRACK APPLICATION For wardrobes, cupboards and similar doors. Light domestic use, normal handling. Maximum door weight

More information

Sliding Door Hardware

Sliding Door Hardware Sliding Door Hardware Hager Companies offers a full line of high quality, durable sliding door hardware that is the perfect choice for any by-pass, bi-fold, or pocket door application your project requires.

More information

Quality accessories to match quality handles

Quality accessories to match quality handles 69 Door Accessories 70 Door Stops 71 Door Holders 73 Hinges 74 Reverse Barrel Bolts Dust Socket Security Door Bolt Barrel Bolts 75 Flush Bolts Panic Bolts 77 Wardrobe Accessories 78 Escutcheons, Knockers

More information

Shower Door Hardware A (2 per card) (4 per card) Roller (Oval edge) 1901-B (2 per card) (4 per card) Roller (Flat edge)

Shower Door Hardware A (2 per card) (4 per card) Roller (Oval edge) 1901-B (2 per card) (4 per card) Roller (Flat edge) 1901-A 192065 1901-A (2 per card) 192065 (4 per card) 7/16" Roller (Oval edge) Contents: Rollers with no. 8-32 x Phillips binder head machine screws. Description: Nylon ball bearing roller with threaded

More information

TOPRAIL SYSTEMS LIMITED NATIONAL BUILDING SPECIFICATION DOCUMENT (N B S)

TOPRAIL SYSTEMS LIMITED NATIONAL BUILDING SPECIFICATION DOCUMENT (N B S) TOPRAIL SYSTEMS LIMITED NATIONAL BUILDING SPECIFICATION DOCUMENT (N B S) TOPRAIL SHELVING / PROPRIETARY STORAGE SYSTEM DESCRIPTION: Rail hung storage system. All items are hung from the rail/uprights -

More information

Actual Peg Diameter. The following pages include a comprehensive selection of shelf peg styles, colors, finishes and peg diameters. Builder's Hardware

Actual Peg Diameter. The following pages include a comprehensive selection of shelf peg styles, colors, finishes and peg diameters. Builder's Hardware The following pages include a comprehensive selection of shelf peg styles, colors, finishes and peg diameters. Actual Peg 3 mm (1/8" approx) 4 mm (5/32" approx) 5 mm (3/16" approx) 7 mm (9/32" approx)

More information

Sliding and Folding Door Fittings Folding Door Fittings

Sliding and Folding Door Fittings Folding Door Fittings Bifold door fitting Silent 0/A Features For large wall units or cabinets as well as for dividing panels Simple installation with no routering or grooving necessary Maximum running performance due to running

More information

Premium Dry Freight - Universal Style - Door Installation REFERENCE FIGURE 1

Premium Dry Freight - Universal Style - Door Installation REFERENCE FIGURE 1 Premium Dry Freight - Universal Style - Door Installation A Premium door can be identified as usually having a two-spring balancer, 2 diameter (nominal) rollers, and end hinges with removable covers. If

More information

Shopfitting - Shelf Supports, Small Hinges, Locks & Showcase Fittings

Shopfitting - Shelf Supports, Small Hinges, Locks & Showcase Fittings Shopfitting - Shelf Supports, Small Hinges, Locks & Showcase Fittings PAGE 1 Clips with Tipped Screws - 6 - B- -G- d a -A- b c e -C- -D- -E- ø8 8 1 11 -F- -H- -J- -K- -L- -M- -N- -O- -I- - P - - Q - -

More information

Call Call

Call Call Check out Closet & Shelving Check out Storage & Convenience Hinges & Pivots Template Butt Hinge Non-Ball Bearing For medium weight doors of average frequency. All hinges have template screw hole location

More information

Offset Entrance Door Pulls

Offset Entrance Door Pulls Push Plate PUSH & PULL PLATES BHMA J301.050" thick Size TRM 1001 1 605 ------3 12 TRM 1001 1 613 ------3 12 TRM 1001 1 628 ------3 12 TRM 1001 1 630 ------3 12 TRM 1001 3 605 ------4 16 TRM 1001 3 609

More information

Office, Shop & Bed Fittings

Office, Shop & Bed Fittings Office, Shop & Bed Fittings Office & Shop Fitting Hardware Keyboard Mechanisms... 2 Drawer Label Holder... 2 Shelf Stripping...3 Bracket Accessories... 4 Shelf Rail... 5 Swivel... 6 Plug Cable Outlets...

More information

Exclusive Glass Door Hardware by Izerwaren.Com

Exclusive Glass Door Hardware by Izerwaren.Com Exclusive Glass Door Hardware by Izerwaren.Com CHROME PLATED BRASS GLASS DOOR LATCHES for 3/8 to 1/2 inch thick glass 316 STAINLESS STEEL GLASS DOOR HINGES for 3/8 to 1/2 inch thick glass Glass Door /

More information

New Contract Range AFFORDABLE ACCESSIBLE RELIABLE SAFE FUNCTIONAL

New Contract Range AFFORDABLE ACCESSIBLE RELIABLE SAFE FUNCTIONAL New Contract Range AFFORDABLE ACCESSIBLE RELIABLE SAFE FUNCTIONAL High Technology Low Maintenance User Friendly Value for Money Door Hardware Door Closer - Surface Mounted 1 Door Closer - Concealed 2 Floor

More information

Shelf Brackets and Supports

Shelf Brackets and Supports Shelf Brackets and Supports PAGE 01 J CSL/8805/11/10 Shelf Brackets & Supports 2047 2050 Finishes available: PC - Polished Chrome MNC - Matt Nickel Coated 1053 Finishes available: PC - Polished Chrome

More information

RV and Mobile Home Hardware

RV and Mobile Home Hardware Length 223242 223243 221790 221787 RV and Mobile Home Hardware 223242 (13/16" stem length) 223243 (1-3/4" stem length) 221790 (2-1/8" stem length) 221787 (3-1/8" stem length) Contents: 2 handles; 2 installation

More information

Concealed Hinges For wooden doors

Concealed Hinges For wooden doors Concealed Hinges For wooden doors METALLAMAT A Concealed hinge Opening angle 110 Full overlay mounting with mounting plate Minimum gap Door thickness mm 3 4 5 6 7 15 0,6 0,6 0,6 0,6 0,6 16 0,8 0,8 0,8

More information

Bi-Fold Closet Door Pin Assemblies. In Order by Pin Diameter & Height. Assembly # Pin w/cap Cap Tinnerman Clip

Bi-Fold Closet Door Pin Assemblies. In Order by Pin Diameter & Height. Assembly # Pin w/cap Cap Tinnerman Clip Bi-Fold Closet Door Pin Assemblies In Order by Pin Diameter & Height Closet Door Hardware 1/4" DIAMETER Assembly # 900-9421 Assembly # 1-250 Pin w/cap 1-243 Cap 4-119 Spring 5-51 Push Nut 6-122 Assembly

More information

SHELF BRACKETS AND SUPPORTS Adjustable Pilaster Standards and Clips

SHELF BRACKETS AND SUPPORTS Adjustable Pilaster Standards and Clips SHELF BRACKETS AND SUPPORTS Adjustable Pilaster Standards and Clips Adjustable Pilaster Standards and Clips 255/256 Adjustable Pilaster Shelving 255 Steel Standards Holds up to 500lbs. per shelf. Surface

More information

BZP Tensile Class 8 Stainless Steel A2 Height (m) in mm A/F (sw) in mm Art. No.

BZP Tensile Class 8 Stainless Steel A2 Height (m) in mm A/F (sw) in mm Art. No. Hexagon Nuts Full nut with metric coarse thread. Available in the following materials: Steel, Bright Zinc Plated. Din 934-8 Steel, Self Colour. Din 934-10. Stainless Steel; A2-70. Din 934. Also available

More information

Catalogue: TEK_0102. Door Holders and Door Stops

Catalogue: TEK_0102. Door Holders and Door Stops Catalogue: TEK_0102 Door Holders and Door Stops and Door Stops Contents Information Introduction Page 3 KWS Door Holders General Information Page 4 Product Overview Page 6 KWS Door Holders Page 10 KWS

More information

General Hardware & Tools

General Hardware & Tools General Hardware & Tools General Hardware & Tools x.1 General Hardware and Tools Product guide Cabinet Hardware Page Bed Fittings 5.3 Joiners and Connectors 5.4 Brackets 5.5 Cable Entry Grommets 5.6 Castors

More information

Signature. ILLUSTRATED Construction Details. Kewaunee. Series Quality Wood Laboratory Casework

Signature. ILLUSTRATED Construction Details. Kewaunee. Series Quality Wood Laboratory Casework ILLUSTRATED Scientific Corporation PO Box 1842 Statesville, NC 28687-1842 Phone: 704-873-7202 Fax: 800-932-3296 Email: marketing@kewaunee.com Web Page: www.kewaunee.com Drawer Slides Epoxy Coated Runners

More information

Lift-up systems Product guide

Lift-up systems Product guide Lift-up systems Lift-up systems Product guide Huwilift 2 nd Generation Page Huwilift-Senso for bifold doors touch control soft closing with hinges pinch guard finger protection feature shallow depth required

More information

QUATURIS CORNER CABINET SYSTEMS AND CABINET SUSPENSION FITTINGS.

QUATURIS CORNER CABINET SYSTEMS AND CABINET SUSPENSION FITTINGS. QUATURIS CORNER CABINET SYSTEMS AND CABINET SUSPENSION FITTINGS Intelligent solutions for more storage space. Ergonomic, versatile and functional. www.grass.eu Each corner is a curve. With the Quaturis

More information

WINDOWS AND PATIO DOORS

WINDOWS AND PATIO DOORS WINDOWS AND PATIO DOORS This section presents a selection of the Fix range of fittings, such as multi-point locks and door guards. Even lockable handles, code handles, window locks and other security locks

More information

Office / Furniture. Cable Covers & Keyboard Tray 16.2. Table Legs 16.3. Desk Locks 16.4. Casters & File Accessories 16.7. CD/DVD Holders 16.

Office / Furniture. Cable Covers & Keyboard Tray 16.2. Table Legs 16.3. Desk Locks 16.4. Casters & File Accessories 16.7. CD/DVD Holders 16. Cable Covers & Keyboard Tray 16.2 Table egs 16. Desk ocks 16.4 Casters & File Accessories 16.7 CD/DVD Holders 16.8 Furniture Feet 16.9 NOVER PRODUCT CATAOGUE 16.1 OFFICE/FURNITURE CABE COVERS & KEYBOARD

More information

Drawer Runners Information

Drawer Runners Information Information Runner type options Concealed runners Plastic rollers in running gears or steel balls in ball cages are the running elements, depening on the version. Installing the runner to the underside

More information

Bathroom Locks and Latches

Bathroom Locks and Latches 3 Lever Horizontal Bathroom Lock 2026 For timber doors hinged on the left or right and requiring turn and emergency release functions locked or unlocked by separate turn from inside, or by separate emergency

More information

Plastic and Aluminium Extrusions combined with the necessary fittings to enable their use for many diverse applications.

Plastic and Aluminium Extrusions combined with the necessary fittings to enable their use for many diverse applications. Plastic and Aluminium Extrusions combined with the necessary fittings to enable their use for many diverse applications. See also the range of spacers, suspensions, Drawer Slides, Handles, Knobs, Screw

More information

KNAP KAP OPTION INDEX

KNAP KAP OPTION INDEX INDEX Option Option Description Page No. Cabinet Hooks 9 Drawer Cabinet Combination Stationary/Swivel 7 7 Ladder Racks Ladder Rack, Top Mount 8 Ladder Rack Rollers 8 Ladder Rack Rails 9 Ladder Clamp 9

More information

Door Hinges Contents. Butt hinges. Drill-in hinges. Lift-off hinge Butt hinge rising Standard hinge Parliament hinge...3.

Door Hinges Contents. Butt hinges. Drill-in hinges. Lift-off hinge Butt hinge rising Standard hinge Parliament hinge...3. Door Hinges Contents Butt hinges Lift-off hinge...10 Butt hinge rising...11 Standard hinge...12 Parliament hinge...19 Heavy duty hinge...20,.24 Accessories for hinges...21 Butt hinge with receiver...22

More information

Counter Height Storage Cabinets 9000 Series Assembly Instructions

Counter Height Storage Cabinets 9000 Series Assembly Instructions Counter Height Storage Cabinets 9000 Series Assembly Instructions Thank you for selecting Salsbury s counter height storage cabinet. We are confident that the quality and construction of the cabinet will

More information

G-2. Space Management. Above the Desk Space Management. Tool Bars

G-2. Space Management. Above the Desk Space Management. Tool Bars Space Management Above the Desk Space Management Custom Accents Space Management is designed to create added workspace for the office environment. By placing often used desk items in easy to access storage

More information

Tiles Installation Manual

Tiles Installation Manual Complete instructions to install the Friant Tiles panel system Table of Contents Introduction... 3 Tile Assembly, Frames, Connectors, and Change of Height Wedge Installation... 4 Tiles Assembly, Frames,

More information

Glass Door Hinges Selection Chart

Glass Door Hinges Selection Chart Glass Door Hinges Selection Chart The Wixroyd range of glass door hinges are intended for the mounting of smaller doors and panels on cabinets and enclosures, typically their maximum load capacity is 4

More information

Rack Cabinet (REFK Series)

Rack Cabinet (REFK Series) Includes two pair of heavy duty, 10-gauge steel, zinc plated rails, drilled & tapped for 10-32 screws Infinitely adjustable panel rails (front to back) on welded amhal struts Strong by design, using interlocking

More information

Folding and sliding door systems

Folding and sliding door systems Folding and sliding door systems Folding door systems Information Folding doors combining the advantages of classical revolving doors with the practical functioning and elegance of sliding doors. They

More information

LOCKS. Slam Locks Cab Door Locks Rod Locks Panel & Door Locks Compartment Locks Fasteners 35-37

LOCKS. Slam Locks Cab Door Locks Rod Locks Panel & Door Locks Compartment Locks Fasteners 35-37 www.carlylebusandcoach.co.uk LOCKS Sub Section Page(s) Slam Locks 1-11 Cab Door Locks 12-17 Rod Locks 17-19 Panel & Door Locks 20-25 Compartment Locks 26-5 Fasteners 5-7 Access Panel Locks 8-40 Budget

More information

COMBINATION ATD full SIDE locker COLOR OPTIONS

COMBINATION ATD full SIDE locker COLOR OPTIONS 42 STORAGE COMBINATION ATD-7090 10-drawer chest Overall: 40-1/2 W x 18-3/16 H x 18-1/8 D Left Bank Drawers: (3) Drawers: 22-15/16 W x 1-7/8 H x 16-1/4 D (2) Drawers: 22-15/16 W x 3 H x 16-1/4 D Right Bank

More information

Living Room and Bedroom Fittings and Accessories

Living Room and Bedroom Fittings and Accessories Living Room and Bedroom Fittings and Accessories Duoletto Built-in foldaway bed, side mounted, with slatted frame Variable and freely selectable mounting height when used as single bed The same fitting

More information

Round top weld-on steel hinges - brass washer material finish part number pin material weight

Round top weld-on steel hinges - brass washer material finish part number pin material weight Fixed pin Round top weld-on steel hinges - brass washer material finish part number pin material weight 40 10 8 5 steel raw 14-7-3585 steel 16g 60 12 10 6 steel raw 14-7-3573 steel 36g 80 16 13 8 steel

More information

Showcard frame system

Showcard frame system Showcard frames for laminated posters, standard, special sizes Advertising on shopping trolleys Price displays Beverages price marking Accessories showcard frames 39 SHOWCARD FRAMES FOR LAMINATED POSTERS

More information

DESIGN INFORMATION. Table of Contents. Commercial Cabinetry and Millwork DESIGN INFORMATION LITERATURE. ADVANTAGE furnishings. Model Number System...

DESIGN INFORMATION. Table of Contents. Commercial Cabinetry and Millwork DESIGN INFORMATION LITERATURE. ADVANTAGE furnishings. Model Number System... Commercial Cabinetry and Millwork Table of Contents DESIGN INFORMATION Model Number System...3 Cabinet Dimensions and Details...4-5 / Assemblies...6-7 Locations...8-14 Top Sections...15-17 Slope Top Details...18

More information

Exclusive Glass Door Hardware by Izerwaren.Com

Exclusive Glass Door Hardware by Izerwaren.Com Exclusive Glass Door Hardware by Izerwaren.Com BRASS PLATED GLASS DOOR LATCHES for 3/8 to 1/2 inch thick glass 316 STAINLESS STEEL GLASS DOOR HINGES for 3/8 to 1/2 inch thick glass Wall to glass hinge

More information

SPECIAL HINGES / ACCESSORIES

SPECIAL HINGES / ACCESSORIES SPECIAL HINGES / ACCESSORIES The DORMA stainless steel hinge for internal glass doors stands out for its optical features determined by function. Various special hinges also for door situations independent

More information

SPILKA TANGO Profile design and fitting instructions Updated

SPILKA TANGO Profile design and fitting instructions Updated Profile design and fitting instructions Updated 28.04.2014 Item Description Item Description 1 SILL PROFILE ALUM.L=4,5 M 8 ESPAGNOLETTE 2 STEEL PROTECTION L=4,5 M 9 HANDLE BARRIER 3 END WEDGE RAIL 10 ADJUSTABLE

More information

Office, Shop & Bed Fittings

Office, Shop & Bed Fittings Office, Shop & Bed Fittings Wardrobe Hardware FEG Wardrobe System... 4 VIBO Elite Wardrobe Range... 14 Tube Rail and Fittings... 24 Wardrobe Suspension Rail & Fittings... 26 Wardrobe Accessories... 26

More information

GT patch system. Notes:

GT patch system. Notes: GT patch system The patch fittings are extremely neat in design (generally 164 x 52mm) and are engineered to the highest standards. They have specially formulated aluminum alloy base bodies and polymer

More information

section 5 WIREWORK & KITCHEN ACCESSORIES

section 5 WIREWORK & KITCHEN ACCESSORIES section 5 WIREWORK & KITCHEN ACCESSORIES 5 WIREWORK & KITCHEN ACCESSORIES WIREWORK 98 BASKETS 102 ACCESSORIES 104 WIREWORK soft close Chrome base unit Finish: chrome Sizes: 300, 400 and 500mm Side mounted

More information

I N S T A L L A T I O N G U I D E

I N S T A L L A T I O N G U I D E Tel 800 668 9318 Tel 416 298 5700 Fax 416 298 9535 mail@nienkamper.com www.nienkamper.com FLIPTOP TABLE I N S T A L L A T I O N G U I D E HARDWARE PARTS LIST FLAT HEAD HEX SOCKET BOLT 1 / 4-20 x 1" Joins

More information

Direct Pull. M6 x 20 (4) (8.32) Panel Preparation ±0.3 (6 ±.01) 12X R4 (.16) 86 ±0.3 (3.39 ±.012) 23.1 (.91)

Direct Pull. M6 x 20 (4) (8.32) Panel Preparation ±0.3 (6 ±.01) 12X R4 (.16) 86 ±0.3 (3.39 ±.012) 23.1 (.91) AC-10 Actuator 6 18 (8.6) 65 (.5) Large handle Flush mount Rear mount installation Flush mounting style Single, multi-point or direct pull actuation capability Multiple key code options Non-Locking option

More information

ITB Ref Item Description QTY

ITB Ref Item Description QTY ITB Ref QTY F-01 Ordinary office desk 102 F-02 Round meeting table 2 F-03 Rectangular meeting table 1 F-04 Executive low cabinet 11 F-05 Executive desk with return 3 F-06 Square table 64 F-07 Closet 41

More information

Black Sand Bronze We are a creative team based in New Zealand, we have been designing and making things for over 20 years, from the small scale of gold smithing to large civic projects, our passion is

More information

VCE VET FURNISHING (CABINET MAKING)

VCE VET FURNISHING (CABINET MAKING) Victorian CertiÞcate of Education 2005 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET FURNISHING (CABINET MAKING) Written examination Section Friday 28 October 2005

More information

Pull Handles. Door Furniture DF3:010

Pull Handles. Door Furniture DF3:010 Pull Handles A classic yet contemporary styled offset design offered either plain ended or with a choice of three finial designs, available rear bolt fix, in pairs for back-to-back installation, or adapted

More information

Welcome to CompX Timberline

Welcome to CompX Timberline Welcome to CompX Timberline What are we all about? Locks for Wood Furniture and Cabinets We can lock desks, credenzas, files, store fixtures, lockers, and cabinets of all types. Wide Selection We make

More information

Contents Full Mortise Hinges Heavy Weight Standard Weight Concealed Hinges Startec Tectus Concealed Mortise Mounted Concealed Jamb Door Closer

Contents Full Mortise Hinges Heavy Weight Standard Weight Concealed Hinges Startec Tectus Concealed Mortise Mounted Concealed Jamb Door Closer DOOR HINGES Contents Full Mortise Hinges Heavy Weight For Interior Doors....3 For Exterior Doors.... Standard Weight For Interior Doors....,.7 For Exterior Doors....6 Electrified....8 Spring Hinge....9

More information

The Hardware Collection

The Hardware Collection The Hardware Collection Hardware Collection About Us Howdens Joinery offers a range of hardware products designed to complement our range of joinery doors and meet the needs of both the modern home and

More information

1 Door Tall Unit ASSEMBLY GUIDE. WARNING: Contains small parts, keep out of reach of children.

1 Door Tall Unit ASSEMBLY GUIDE. WARNING: Contains small parts, keep out of reach of children. ASSEMBLY GUIDE 1 Door Tall Unit IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present If any parts are missing from Parts List 1, please contact 1800

More information

ARB NISSAN GU PATROL REAR STEP TOW BAR

ARB NISSAN GU PATROL REAR STEP TOW BAR ARB NISSAN GU PATROL REAR STEP TOW BAR Product number: 5617210/20 Optional Jerry Can Carrier Optional Wheel Carrier Left Hand Side of vehicle (LHS) Rear Step Tow Bar Right Hand Side of vehicle (RHS) READ

More information

side belt nest (ZBN) page 0 INSTALLATION MANUAL SIDE BELT NEST

side belt nest (ZBN) page 0 INSTALLATION MANUAL SIDE BELT NEST side belt nest (ZBN) page 0 INSTALLATION MANUAL SIDE BELT NEST There are 4 types of sidebelt nests. ezbn (single Side Belt Nest) ZBN (Side Belt Nest (standard)) 2eZBN (single 2tier Side Belt Nest) 2ZBN

More information

2 Door Tall Unit ASSEMBLY GUIDE. Page 1 of 9. WARNING: Contains small parts, keep out of reach of children.

2 Door Tall Unit ASSEMBLY GUIDE. Page 1 of 9. WARNING: Contains small parts, keep out of reach of children. ASSEMBLY GUIDE 2 Door Tall Unit IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present If any parts are missing from Parts List 1, please contact 1800

More information

MAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION

MAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION ORNAMENTAL GATE HARDWARE JUST ASK FOR THE MAXIMA TRADITIONAL QUICK & EASY TO INSTALL Patent No. 4,871,203 No. 4,690,440 j j j j j PRE-ASSEMBLED You do not have to put it together EASIEST INSTALLATION Two

More information

Turn Button Turning of the button locks or releases the outside knob Handing

Turn Button Turning of the button locks or releases the outside knob Handing Introduction - UNION knobsets are ideal for use on timber doors. The outside rose and backplate are adjustable to allow for various door thicknesses, between 33mm and 51mm. UNION knobsets can be fitted

More information

Fax Visit us on the web at McKINNEY McKINNEY McKINNEY McKINNEY McKINN

Fax Visit us on the web at  McKINNEY McKINNEY McKINNEY McKINNEY McKINN 1-800-321-9602 Fax 1-800-328-6070 McKINN 2 Knuckle Hinges Oil Impregnated Bearing (TA) Ball Bearing (TB) Plain Bearing McKinney Products Company provides the non-residential construction industry with

More information

SHELVING SHELVING ACCESSORIES TROLLEYS HARDWARE BARWARE KITCHEN EQUIPMENT HOSPITALITY FURNITURE.

SHELVING SHELVING ACCESSORIES TROLLEYS HARDWARE BARWARE KITCHEN EQUIPMENT HOSPITALITY FURNITURE. SHELVING SHELVING ACCESSORIES TROLLEYS HARDWARE BARWARE KITCHEN EQUIPMENT HOSPITALITY FURNITURE Legs and Mounting Plates Mantova s Adjustable Legs and Leg Plates are designed for easy installation to

More information

Folding Concepta 25. Flush when closed, completely open. Hardware for bi-folding cabinet pocket doors up to 25 kg (55 lbs.) per door.

Folding Concepta 25. Flush when closed, completely open. Hardware for bi-folding cabinet pocket doors up to 25 kg (55 lbs.) per door. Flush when closed, completely open. Hardware for bi-folding cabinet pocket doors up to 25 kg (55 lbs.) per door. Description Flush cabinet fronts open fully end to end with HAWA-Folding Concepta 25. Two

More information

SkyTruss BOX SECTION ASSEMBLY. 1. Lay section flat on floor. 2. Lift top half to unfold. 3. Snap brace locks into the locked position.

SkyTruss BOX SECTION ASSEMBLY. 1. Lay section flat on floor. 2. Lift top half to unfold. 3. Snap brace locks into the locked position. SkyTruss 1 BOX SECTION ASSEMBLY 1. Lay section flat on floor.. Lift top half to unfold.. Snap brace locks into the locked position. UNLOCKED Reverse procedure to collapse section. LOCKED CONNECTING SECTIONS:

More information

Door & Drawer Components > Runners

Door & Drawer Components > Runners Door & Drawer Components > Runners Sylent Drawer Runners - Full extension soft close drawer runners with silver grey finish - no. set per box (boxes can not be split) - Requires 6mm base and back: Base

More information