T inch TFT Flat Panel Monitor (9512) Overview

Transcription

1 T inch TFT Flat Panel Monitor (9512) Overview Applicable countries and regions Service parts Files Publications At a glance Features: 15.0-inch viewable image area Slim bezel Bright, flicker-free 1024 x 768 screen with low amount of reflection Smaller footprint than the equivalent CRT-based monitor Analog interface with 15-pin D-shell connector Tilt stand Available in pearl white and Business Black Video Electronics Standards Association (VESA) Display Data Channel (DDC) 2B Plug and Play capability for easy setup ** TCO99 Compliant ** System hardware and software dependent Warranty 3 year Limited - customer carry-in exchange (worldwide excluding Japan) 1 year Limited - customer carry-in exchange (Japan only) Packaging You will receive one box containing the following items: T541 color monitor Attached tilt stand Attached video signaling cable

2 Attached external power supply Power cord CD with User's guide and monitor installation files 3 -> 2 pin AC adapter (Japan only) Japanese warranty card (Japan only) Product dates United States, Canada, and Latin America Announce date: 9 Apr 2002 Planned availability date: Apr 2002 Withdrawal date: 15 Aug 2003 (United States) Japan (only) Announce date: 9 Apr 2002 Planned availability date: 13 Mar 2002 Withdrawal date: 15 Aug 2003 Europe, Middle East, and Africa Announce date: 9 Apr 2002 Planned availability date: 19 Mar 2002 Withdrawal date: 15 Aug 2003 Technical specifications The T541 color monitor operates with system units or video adapters that generate a video output signal that falls within the T541 specification below: Parameter T541 Maximum addressability (pixels) 1024 x 768 Maximum pixel rate (MHz) 80 Factory preset PC display modes: Addressability Incoming Video (H x V Pixels) Refresh Rate 640 x Hz NI* 640 x Hz NI 640 x Hz NI 640 x Hz NI 720 x Hz NI 800 x Hz NI 800 x Hz NI 800 x Hz NI 800 x Hz NI 832 x Hz NI 1024 x Hz NI 1024 x Hz NI 1024 x Hz NI * Non-interlaced Total factory presets: 13

3 Physical, environmental, and compatibility specifications as known at time of announcement 9512-AW0 and 9512-AB0 Parameter: Unpacked Packed Width: 14.4-in (365 mm) 17.7-in (449 mm) Depth: 8.0-in (202 mm) 16.3-in (413 mm) Height: 13.6-in (345 mm) 10.2-in (260 mm) Weight: 10.5 lb (4.8 kg) 11.9 lb (5.4 kg) 9512-AW1 and 9512-AB1 Parameter: Unpacked Packed Width: 14.4-in (365 mm) 17.9 in (455 mm) Depth: 8.0-in (202 mm) 16.5-in (419 mm) Height: 13.6-in (345 mm) 10.5-in (267 mm) Weight: 10.5 lb (4.8 kg) 13.6 lb (6.2 kg) Power requirements Input voltage: 90 to 264 V ac Frequency: 50/60 Hz Power consumption (Maximum): < 30 watts Power consumption (Normal Use): < 30 watts typical Power consumption (VESA Standby): < 2 watts maximum Power consumption (VESA Off): < 1 at 100 V ac < 2 W at 220 V ac Maximum earth leakage current: < 3.5 ma at 264 V Maximum earth leakage current: < 0.25 ma at 100 V NOTE: Actual power consumption depends on the screen mode used, the images displayed, and how user controls are set. Altitude Operating: 0 to 12,000 ft xipping: 0 to 40,000 ft Storage: 0 to 12,000 ft Operating Temperature: 10 to 35 degrees celsius Relative humidity: 10% to 80% Altitude: 0 to 12,000 ft Storage Temperature: -20 to 60 degrees celsius Relative humidity: 5% to 95% Altitude: 0 to 12,000 ft Shipping Temperature: -20 to 60 degrees celsius Relative humidity: 5% to 95% Altitude: 0 to 40,000 ft Regulatory agency approvals

4 Safety: UL (U.S.) CSA (Canada) IEC950 CB Report NEMKO (Norway) Korea* DEMKO (Denmark) FIMKO (Finland) CE (Europe) Australia* Dentory (Japan)* SEMKO TUV CCIB/CCE NOM SASO SIQ SISIR MEEI * Approval required for Power Adapter only EMC: FCC B (U.S.) IC (Canada) CE (Europe) EN B (Europe) EN (Europe) VCCI Class B (Japan) Australia New Zealand BSMI (Taiwan) Hardware compatibility Appropriate video adapter hardware and software must be installed in the attaching system unit. Monitors are compatible with popular PC system units. Software requirements The T541 color monitor features 2 factory-preset and user-settable display modes. The actual display modes used depend upon the attaching system unit, the operating system, and application software. Supported operating systems Microsoft Windows 3.1 Windows NT 3.5 Windows NT 4.0 Windows 95 Windows 98 Windows 2000 PC DOS 7.0 Compatibility This monitor has been tested and is compatible with systems and graphics adapters which comply with the relevant parts of VESA standard: "VESA and industry standards and guidelines for computer display monitor timing" Version 1.0 Revision 0.8 adopted September 17, 1998.

5 Not all supported display modes run at the high refresh rates necessary for flickerfree performance. Display modes at lower refresh rates are available for compatibility with older video adapters and system units and will not be ISOcompliant. Supported display modes are a function of the attaching system unit. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, and application software. The T541 color monitor is supplied with a detachable 1.8-meter video signal cable. This cable has the widely used 15-pin, D-Sub video connector for system unit connection. Limitations Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards, and application software. Horizontal and vertical synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- sync and V-sync timings for any display mode cannot be assumed. Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications. The number of colors shown in any display mode (up to a maximum of 16.7 million) is not limited by the monitor, but depends upon the capabilities of the video adapter in the system unit. The T541 provides FCC class B - residential installation - compliance in all display modes. Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter. Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug and Play to be effective. Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit. A 15.0-inch TFT monitor has nearly 2.4 million subpixel transistors laid over an area exceeding 81 square inches. Cost-effective manufacturing processes introduce a small number of defective subpixel transistors. The T541 monitor may have up to four defective sub-pixels, which includes a maximum of one adjacent pair of "off" sub-pixel and one adjacent pair of "on" sub-pixel defects. Use of 50% background is not recommended since some users may see undesireable FOS effects. The Auto-Setup "test pattern" is available for use with Windows 3.1, Windows NT 3.5, Windows NT 4.0, Windows 95, Windows 98, Windows 2000, and DOS 7.0 only. Emissions All models in this announcement meet emission category A requirements of Swedish Standard SS (MPR-3A) in addition to those of MPR-2. All models in this announcement meet the Swedish Board for Technical Accreditation (SWEDAC) emission guidelines contained in MPR 1990:10 when tested using the MPR 1990:08 test method. All models meet the TCO99 Environmental Label from the TCO, and the emission, power management, and electrical safety requirements of the TCO99 Environmental Label.

6 Ergonomics Compliance to the ISO standard ISO/DIS Part 2 ensures ergonomic requirements are met when the monitor forms part of an ISO-compliant system. Cable orders No additional cables are required. A 1.8-m power cord appropriate to the country will be supplied. Applicable countries and regions Worldwide Back to top Document id: MIGR Last modified: Copyright 2008 IBM Corporation Copyright Lenovo 2008, all rights reserved