ELECTRODE FOR ELEVATED TEMPERATURE APPLICATIONS

Size: px
Start display at page:

Download "ELECTRODE FOR ELEVATED TEMPERATURE APPLICATIONS"

Transcription

1 S4 ELECTRODE FOR ELEVATED TEMPERATURE HEAT RESISTANCE DISSIMILAR JOINT ELONGATION : 37% UTS : 680 N/sq mm YIELD: 480 N/sq mm IMPACT ENERGY: 90J AT 20 C EURO-TECH S4 is a specially formulated electrode for surfacing as well as joining of all grades of mild steels and alloy steels, heat and scale resistant steels. This can be efficiently used for dissimilar steel as well. The weld deposit is crack-free and fully austenitic which exhibits high strength and resistance to heat and corrosion. The scale resistance is effective even at 1000*C Repairing and fabrication of valves, roots, gears, hot dies, gas turbines. Parts subjected to impact, corrosion and heat. Cladding of stainless steels. Combustion chamber parts, hydrogenation plants furnace, parts. Amps Clean welding area. Bevel 90* for heavy sections. Use low amperages and maintain short arc. Use stringer beads. Preheat of 200* - 300*C recommended for hardenable materials. Use intermittent welding technique to prevent excessive heat build up. Peen the weld on crack- sensitive applications.

2 S6 ELECTRODE FOR CAVITATION & Mo EURO-TECH S6 is an austenitic electrode, with extra low carbon deposit, exhibiting chemical resistant properties and resistant to intercrystalline corrosion. CHEMICAL RESISTANCE CAVITATION RESISTANCE ELONGATION : 30% UTS : 510 N/sq mm In joining austenitic stainless steel grades 18/8, AISI 316 etc., In repairing of pumps, impellers, pipelines of acid handling systems. Chemical, fertilizer, paper and pulp Industries. Chemical vessels and Chemical plants. Breweries and food processing equipments. Amps Clean weld area. Bevel 60* for heavy sections square butt welding can be done for thickness up to 3mm. Use stringer beads with a short arc. Skip or step back technique to be employed for equal heat distribution. Tack weld for aligning long seams and use clamps to avoid warping.

3 ELECTRODE FOR REPAIRS IN MANGANESE STEEL S7 HD Mo EURO-TECH S7 HD is a stainless steel electrode which produces an excellent heat resistant weld even at 900 C and also exhibits resistance to corrosion in sea water, acids etc., ACID & SEA WATER HEAT C SUITABLE FOR STEEL ELONGATION : 40% UTS : 560 N/sq mm Suitable for welding austenitic manganese steels with 14%. For joining austenitic steels to mild steels, high alloy steels. Buffer layer for hard surfacing and repairing of cracks in austenitic manganese steels. Rails and manganese steel castings. Amps Clean weld area. On 14% steel ensure that the weldment temperature is kept below 150 C by employing proper welding technique. Use low amperage & short arc. Do not weave more than 2 times the electrode size. Peening of weld deposit ensures maximum crack resistivity

4 SL8 EXTRA LOW CARBON WELD METAL EURO-TECH SL8 is a suitably formulated special electrode which gives a weld, free from inter-crystalline corrosion with easy arc striking and shining finish. The weld metal possesses corrosion and scale resistant properties and it has a very low carbon content i.e. below 0.04% SCALE RESISTANCE ELC WELD METAL ELONGATION : 35% UTS : 550 N/Sq mm Electrode is suitable for joining 18/8 stainless steels in breweries. Dyeing units. Food industries and medical equipment. Sugar Plant Roller Journal etc., Amps Clean the weld area. Square butt welding can be done for sheets thickness up to 10 gauge. Bevel 60 C for greater thickness. Use stringer beads with low current and short arc. Use skip welding technique to avoid excessive heat build up.

5 SL7 LOW CARBON WELD METAL EURO-TECH SL7 is well designed low heat input welding electrode suitable for welding repair and erection of SS tanks, SS components where resistance to corrosion is a requirement. The electrode is suitable for welding and repairing of SS components of grade 301, 302, 304, 304L, 308, 321 & 347 and of similar composition SCALE RESISTANCE OXIDATION RESISTANCE HIGH TEMP. ELONGATION : 40% UTS : 560 N/Sq mm Wide use of welding of SS parts in oil refinery, storage tanks in chemical industries, paper, dairy & food industry Amps Clean the weld area, remove rust, oil, grease etc. Use short arc and low current. Use stringent bead technique Redry the electrodes before use Keep the electrodes dry

6 S9 ELECTRODE FOR OXIDATION RESISTANCE IN STEELS Mo SS TO DISSIMILAR STEELS OXIDATION RESISTANCE BUFFER LAYER ELONGATION : 30% HARDNESS :200 BHN UTS : N/sq mm YEILD : 420 N/sq mm IMPACT ENERGY: 40J EURO-TECH S9 is an easy to operate electrode with stable and steady arc. The electrode has an excellent slag lifting property with a shining bead. The surfacing job can be efficiently undertaken with much ease. The weldment exhibits good impact resistant property and is strong, ductile and tough. Suited for welding stainless steel to carbon steel low alloy steels. Cast steels and austenitic manganese steels. The electrode deposits tough weld on cast steels and austenitic manganese steels. Rebuilding of valve faces, turbine blades, impellers, shafts etc., Buffer layer acid resisting clad steel. Amps Clean welding area. Use proper welding technique. Stress relieving required after welding.

7 S10 SS ELECTRODE FOR HIGH TEMPERATURE Mo EURO-TECH S10 is a fully austenitic heat resistant alloy and it gives deposit which can withstand temperature of 1200*C in sulphur-free and oxide-free atmosphere. CREEP C AUSTENITIC WELD ELONGATION : 35% UTS : 560 N/sq mm IMPACT: 95J Suited for welding austenitic stainless steel. Heat resistant steels. For welding high carbon steel. Welding of furnace inner linings, burners, heat treatment equipments, cooler plants, hangers, butterfly dampers etc., Amps Clean weld area. Heavy section should be beveled 60*. Use stringer beads with a short arc. Avoid weaving.

8 S12 AUSTENO FERRITIC WELD EURO-TECH S12 is specially formulated for welding high strength steel and steels with unknown compositions. It gives very smooth arc and defect free austeno ferritic weld metal. The deposit is resistant to friction, heat and corrosion CREEP RESISTANCE AUSTENO FERRITIC WELD HARDNESS : 220 VPN ELONGATION : 20% UTS : 710 N/sq mm Earth moving equipment parts, automobile springs. Parts subjected to heat, corrosion and impact. Joining dissimilar steels. Repair of drop forge dies. For buffer layer prior to hard facing Size (mm) Amps Clean weld area free of oil, grease etc., Bevel 90º for heavy sections. Preheat the job to about 150 C. Use low amperage holding a short arc. Avoid weaving Clean thoroughly between passes. Allow the weld to cool slowly.

9 S12S AUSTENO FERRITIC WELD WITH RESISTANCE TO DUCTILITY & CRACK EURO-TECH S12S is specially formulated for depositing a weld metal which is Austeno ferrite, with high tensile strength and resistant to ductility & crack RESISTANT TO DUCTILE RESISTANT TO CRACKS & FISSURES HARDNESS : 220 VPN ELONGATION : 20% UTS : 710 N/sq mm Difficult to weld steels, springs, pinions, dies, armature shafts, rolls, gears buffer layers for hard facing Parts subjected to cracks & fissures. Joining dissimilar steels. Amps Clean the weld area. Remove rust, oil, grease etc., Use short arc and low current Preheat the job to about 150 C and cool slowly. Re-dry the electrodes before use. Keep the electrodes dry.

Stainless steel grade chart

Stainless steel grade chart Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon

More information

North American Stainless

North American Stainless Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,

More information

North American Stainless

North American Stainless North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.

More information

Chapter 5 - Aircraft Welding

Chapter 5 - Aircraft Welding Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced

More information

Duplex Stainless Steel Fabrication. Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association

Duplex Stainless Steel Fabrication. Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association Duplex Stainless Steel Fabrication Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association 1 Promoting molybdenum - as a material with superior properties and performance in a

More information

Weld Cracking. An Excerpt from The Fabricators' and Erectors' Guide to Welded Steel Construction. The James F. Lincoln Arc Welding Foundation

Weld Cracking. An Excerpt from The Fabricators' and Erectors' Guide to Welded Steel Construction. The James F. Lincoln Arc Welding Foundation Weld Cracking An Excerpt from The Fabricators' and Erectors' Guide to Welded Steel Construction The James F. Lincoln Arc Welding Foundation Weld Cracking Several types of discontinuities may occur in welds

More information

ALLOY 2205 DATA SHEET

ALLOY 2205 DATA SHEET ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,

More information

North American Stainless

North American Stainless North American Stainless Long Products Stainless Steel Grade Sheet AISI 316 UNS S31600 EN 1.4401 AISI 316L UNS S31630 EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic

More information

Technical Data BLUE SHEET. Martensitic. stainless steels. Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES APPLICATIONS PRODUCT FORM

Technical Data BLUE SHEET. Martensitic. stainless steels. Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES APPLICATIONS PRODUCT FORM Technical Data BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA Martensitic Stainless Steels Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES Allegheny Ludlum Types 410, 420, 425 Modified, and

More information

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :- Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and

More information

Section 4: NiResist Iron

Section 4: NiResist Iron Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar

More information

DX2202 Duplex stainless steel

DX2202 Duplex stainless steel Stainless Europe Grade DX22 Duplex stainless steel Chemical Composition Elements C Mn Cr Ni Mo N %.25.3 23. 2.5

More information

North American Stainless

North American Stainless North American Stainless Flat Product Stainless Steel Grade Sheet 316 (S31600)/EN 1.4401 316L (S31603)/ EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic stainless

More information

GENERAL PROPERTIES //////////////////////////////////////////////////////

GENERAL PROPERTIES ////////////////////////////////////////////////////// ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation

More information

www.klmtechgroup.com TABLE OF CONTENT

www.klmtechgroup.com TABLE OF CONTENT Page : 1 of 45 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT 1.0 SCOPE 2 2.0 CONFLICTS

More information

WJM Technologies excellence in material joining

WJM Technologies excellence in material joining Girish P. Kelkar, Ph.D. (562) 743-7576 girish@welding-consultant.com www.welding-consultant.com Weld Cracks An Engineer s Worst Nightmare There are a variety of physical defects such as undercut, insufficient

More information

INDIAN STANDARDS (BIS) ON WELDING

INDIAN STANDARDS (BIS) ON WELDING ** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding

More information

AUSTENITIC STAINLESS DAMASCENE STEEL

AUSTENITIC STAINLESS DAMASCENE STEEL AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel

More information

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat

More information

The mechanical properties of metal affected by heat treatment are:

The mechanical properties of metal affected by heat treatment are: Training Objective After watching this video and reviewing the printed material, the student/trainee will learn the basic concepts of the heat treating processes as they pertain to carbon and alloy steels.

More information

ALLOY C276 DATA SHEET

ALLOY C276 DATA SHEET ALLOY C276 DATA SHEET //// Alloy C276 (UNS designation N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy known for its corrosion resistance in a wide range of aggressive media. It is one of the

More information

ATI 2205 ATI 2205. Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)

ATI 2205 ATI 2205. Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205) ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly

More information

Valve Steel. Valve Steel

Valve Steel. Valve Steel Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique

More information

Copper Alloys COPPER ALLOYS. Weld Tech News VOL 1. NO. 8

Copper Alloys COPPER ALLOYS. Weld Tech News VOL 1. NO. 8 Copper Alloys Weld Tech News VOL 1. NO. 8 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,

More information

Welding of Boilers, Pressure Vessels and Pressure Piping

Welding of Boilers, Pressure Vessels and Pressure Piping WELDING OF BOILERS, PRESSURE VESSELS 1 Welding of Boilers, Pressure Vessels and Pressure Piping Repealed by Chapter B-5.1 Reg 1 (effective January 1, 2007) Formerly Saskatchewan Regulation 61/78 (effective

More information

Drill Pipe Hard-facing

Drill Pipe Hard-facing Drill Pipe Hard-facing GLOBAL PROTECTION AGAINST WEAR AND TEAR Oxyacetylene Rods Flux- and Metal Cored Wires Electrodes PTA - Welding Oxyacetylene Welding and Spray Powders Flame Spraying FLSP Arc Spraying

More information

MATERIALIZING VISIONS. Bohler-Uddeholm P20 Modified

MATERIALIZING VISIONS. Bohler-Uddeholm P20 Modified MATERIALIZING VISIONS Bohler-Uddeholm P20 Modified General Bohler-Uddeholm P20 Modified is a Cr-Mo-alloyed steel which is supplied in the hardened and tempered condition. P20 Modified offers the following

More information

MATERIAL SPECIFICATIONS CATALOGUE

MATERIAL SPECIFICATIONS CATALOGUE MATERIAL SPECIFICATIONS CATALOGUE Manganese Steel High Chrome White Iron Alloy Steel Carbon Steel Stainless Steel SG Iron Cast Iron E X C E L L E N C E T H R O U G H E X P E R I E N C E Foundries has the

More information

FIELD ACCEPTANCE OF FIELD WELDING GUIDE

FIELD ACCEPTANCE OF FIELD WELDING GUIDE Page 1 of 17 Oklahoma DOT Materials & Testing January 14, 2004 Publication: GFA-FW (Updated to reference current Structural Materials Branch of the ODOT Materials Division URL 07/06/2016) FIELD ACCEPTANCE

More information

HEAT TREATMENT OF STEEL

HEAT TREATMENT OF STEEL HEAT TREATMENT OF STEEL Heat Treatment of Steel Most heat treating operations begin with heating the alloy into the austenitic phase field to dissolve the carbide in the iron. Steel heat treating practice

More information

Rely on Our Material Competence for Your Demanding Industrial Processes

Rely on Our Material Competence for Your Demanding Industrial Processes Cast Materials Rely on Our Material Competence for Your Demanding Industrial Processes Our customer-focused R&D and continuous research on new material options enable us to develop equipment with a strong

More information

TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe

TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333

More information

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 304 (S30400)/ EN 1.4301 304L (S30403) / EN 1.4307 304H (S30409) Introduction: Types 304, 304L and 304H are the most versatile and widely

More information

Durcomet 100 CD4MCuN. Bulletin A/7l

Durcomet 100 CD4MCuN. Bulletin A/7l Durcomet 100 CD4MCuN Bulletin A/7l Durcomet 100 Introduction Durcomet 100 is a duplex stainless steel produced to ASTM specification A995 or A890, Grade CD4MCuN (1B). It is indicated by the Flowserve casting

More information

AISI O1 Cold work tool steel

AISI O1 Cold work tool steel T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their

More information

Welding. Module 19.2.1

Welding. Module 19.2.1 Welding Module 19.2.1 Hard Soldering Hard soldering is a general term for silver soldering and brazing. These are very similar thermal joining processes to soft soldering in as much that the parent metal

More information

BUMAX. REYHER your partner for the BUMAX range

BUMAX. REYHER your partner for the BUMAX range BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX

More information

SPECIFICATIONS FOR STEEL PIPE

SPECIFICATIONS FOR STEEL PIPE SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical

More information

FLAME CuTTIng te la P is utting B c

FLAME CuTTIng te la P is utting B c FLAME CUTTING Both Oxy-LPG and Oxy-acetylene processes are acceptable for sectioning all thicknesses of BISPLATE. With these processes, the following techniques are recommended: Gas pressure to be the

More information

How To Write A Recipe Card

How To Write A Recipe Card Forging stock standards guideline Issue n 10 FORGING STOCK 30 Microstructure 34 Grain size Air melted (except if δ ferrite or problem 1 per batch) 50 Cleanness/ Inclusion See EN 2157-2. 51 Macrostructure

More information

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

SAND CAST CHILL CAST LM4 - TF

SAND CAST CHILL CAST LM4 - TF 1 This alloy conforms with British Standards 1490 and is similar to the obsolete specifications BS.L79 and D.T.D 424A. Castings may be in the cast (M) of fully heat treated (TF) conditions. CHEMICAL COMPOSITION

More information

Pressure vessel basics for all engineers

Pressure vessel basics for all engineers Pressure vessel basics for all engineers by Sharjeel Aslam Faiz 1. Contents 2. Preliminary Design... 3 3. Loads... 3 4. Detailed design... 3 5. Information in-flow to a fabrication drawing... 4 6. Information

More information

The next generation of permanent cathode and lead anode technology

The next generation of permanent cathode and lead anode technology MARSDEN, T. and JICKLING, J The next generation of permanent cathode and lead anode technology. Hydrometallurgy Conference 2009, The Southern African Institute of Mining and Metallurgy, 2009. The next

More information

Application of Welding Standards in Hong Kong. S. K. Babu Laboratory Manager - Foundation Techniques Ltd

Application of Welding Standards in Hong Kong. S. K. Babu Laboratory Manager - Foundation Techniques Ltd Application of Welding Standards in Hong Kong S. K. Babu Laboratory Manager - Foundation Techniques Ltd Introduction: This paper summarizes the current welding standards practiced in Hong Kong & also outlines

More information

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel

More information

Secondary Containment Comparison ATI Ultra COAT vs HDPE

Secondary Containment Comparison ATI Ultra COAT vs HDPE When choosing a secondary containment system it must be chosen based on its ability to withstand long term contact with the natural elements (weather), whatever the tanks hold (unrefined oil, fuels, acids,

More information

ALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST

ALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST SUPPLYING THE WORLD S BEST DESCRIPTION 6022 is a heat treatable low copper, Al-Si-Mg sheet alloy developed by Alcoa to satisfy the needs of automotive manufacturers for closure panels, such as a hood,

More information

CABINET. A Clean Burn Heat Exchanger provides approximately 200% more surface area for capturing combustion heat. You get more heat from less oil.

CABINET. A Clean Burn Heat Exchanger provides approximately 200% more surface area for capturing combustion heat. You get more heat from less oil. Lanair Clean Burn CABINET Lanair's lightweight heat exchanger provides very little travel for the heat to be picked-up and ultimately be transferred to your shop. It uses a 2-pass design made up of 12

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 2205 (S32205)/ EN 1.4462 (S31803) Introduction: SS2205 is a duplex stainless steel with a microstructure, when heat treated properly,

More information

Wearpipe. Induction Hardened Chromium Carbide Overlay Ceramic Lined

Wearpipe. Induction Hardened Chromium Carbide Overlay Ceramic Lined Wearpipe Induction Hardened Chromium Carbide Overlay Ceramic Lined WEAR PIPE OPTIONS St. Lawrence Steel is a provider of wear resistant solutions serving heavy industry since 1955. We are a leader in supplying

More information

SS-EN ISO 9001 SS-EN ISO 14001

SS-EN ISO 9001 SS-EN ISO 14001 This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties

More information

WELDING OF STAINLESS STEELS AND OTHER JOINING METHODS

WELDING OF STAINLESS STEELS AND OTHER JOINING METHODS A DESIGNERS HANDBOOK SERIES N O 9 002 WELDING OF STAINLESS STEELS AND OTHER JOINING METHODS Distributed by NICKEL DEVELOPMENT INSTITUTE Produced by AMERICAN IRON AND STEEL INSTITUTE TABLE OF CONTENTS FOR

More information

RAMAX S Prehardened stainless holder steel

RAMAX S Prehardened stainless holder steel T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide

More information

Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014. Juha Kela / 316plus

Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014. Juha Kela / 316plus Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014 8 July 2014 1 Lower cost 8 July 2014 2 Lower cost 316 plus is available at lower,

More information

Oil and Gas Pipeline Design, Maintenance and Repair

Oil and Gas Pipeline Design, Maintenance and Repair Oil and Gas Pipeline Design, Maintenance and Repair Dr. Abdel-Alim Hashem Professor of Petroleum Engineering Mining, Petroleum & Metallurgical Eng. Dept. Faculty of Engineering Cairo University aelsayed@mail.eng.cu.edu.eg

More information

CONTENTS. ZVU Engineering a.s., Member of ZVU Group, WASTE HEAT BOILERS Page 2

CONTENTS. ZVU Engineering a.s., Member of ZVU Group, WASTE HEAT BOILERS Page 2 WASTE HEAT BOILERS CONTENTS 1 INTRODUCTION... 3 2 CONCEPTION OF WASTE HEAT BOILERS... 4 2.1 Complex Solution...4 2.2 Kind of Heat Exchange...5 2.3 Heat Recovery Units and Their Usage...5 2.4 Materials

More information

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to

More information

Goulds AF. Axial Flow Pump

Goulds AF. Axial Flow Pump Goulds AF Axial Flow Pump Goulds AF The Industry Leader in Circulating Pump Technologies Fabricated design 42-66 (1050-1600 mm) (shown with optional spring mounted base) Cast design 6-36 (150-900 mm) Goulds

More information

PRELIMINARY BROCHURE. Uddeholm Corrax

PRELIMINARY BROCHURE. Uddeholm Corrax PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.

More information

Field Welding Inspection Guide

Field Welding Inspection Guide Field Welding Inspection Guide Assistance in interpretation of any specification or questions concerning field welding issues can be obtained from the Office of Materials Management, Structural Welding

More information

Urea and Nitric Acid Plants: Improvement of Shut-Down, Revamping, Debottlenecking and Refurbishment

Urea and Nitric Acid Plants: Improvement of Shut-Down, Revamping, Debottlenecking and Refurbishment pp Urea and Nitric Acid Plants: Improvement of Shut-Down, Revamping, Debottlenecking and Refurbishment J. M. SLUYTERS GEMACO SA Herstal, Belgium A presentation on special corrosion-resistant steels for

More information

Progress on High Efficiency Coal Power Plants

Progress on High Efficiency Coal Power Plants CoalFleet for Tomorrow Progress on High Efficiency Coal Power Plants Dr. Jeff Phillips Sr. Program Manager, Generation McIlvaine Webcast March 1, 2012 CoalFleet for Tomorrow is a registered service mark

More information

EN 13445-4:2002 (E) Issue 1 (2002-05)

EN 13445-4:2002 (E) Issue 1 (2002-05) Issue 1 (2002-05) 8.4.4 Impact test...26 8.4.5 Bend test...26 8.4.6 Macro examination...27 8.4.7 Micro examination...27 8.4.8 Hardness test...27 8.4.9 Retests...27 8.4.10 Test report...28 9 Forming of

More information

Rev. 00 S-7016.H. COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.

Rev. 00 S-7016.H. COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD. Rev. 00 COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD. Specification AWS JIS EN ISO Z3211 A5.1 2560-A E7016 E4916 E42 E4916 E42 3 B 1 2 Applications Structures

More information

North American Stainless

North American Stainless North American Stainless Long Products Stainless Steel Grade Sheet AISI 304 UNS S30400 EN 1.4301 AISI 304L UNS S30430 EN 1.4307 INTRODUCTION: Types 304 and 304L are the most versatile and widely used of

More information

CHAIN CARE & TROUBLE SHOOTING

CHAIN CARE & TROUBLE SHOOTING Fatigue Failure Bushing Fatigue Stress Corrosion Stress Corrosion and Hydrogen Embrittlement These closely related failures are similar in appearance and nature. They appear as cracks which initiate at

More information

OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610)

OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) The Heart of Your Process OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) OHV OHVL OHV/OHVL Sales Presentation slide

More information

Originators of the Flexible Water Tube design

Originators of the Flexible Water Tube design BRYAN FLEXIBLE WATER TUBE AB SERIES STEAM AND WATER BOILER 900,000 TO 3,000,000 BTUH FORCED DRAFT GAS, OIL OR DUAL FUEL FIRED Water Boiler AB120-W-FDGO Steam Boiler AB250-S-150-FDG Originators of the Flexible

More information

PRELIMINARY BROCHURE. Uddeholm Ramax HH

PRELIMINARY BROCHURE. Uddeholm Ramax HH PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.

More information

COMPAX SUPREME Mold Quality Tool Steel

COMPAX SUPREME Mold Quality Tool Steel T OOL STEEL FACTS COMPAX Mold Quality Tool Steel Great Tooling Starts Here! 2 This information is based on our present state of knowledge and is intended to provide general notes on our products and their

More information

STAVAX SUPREME. Stainless tool steel

STAVAX SUPREME. Stainless tool steel STAVAX SUPREME Stainless tool steel General Demands placed on plastic mould tooling are increasing. Such conditions require mould steels that possess a unique combination of toughness, corrosion resistance

More information

Submerged Arc Wires & Fluxes

Submerged Arc Wires & Fluxes Submerged Arc Wires & Fluxes Unsurpassed solutions for ambitious tasks www.airliquide.ca www.blueshield.ca 1 of 6 For decades, Air Liquide and Oerlikon have contributed significantly to the development

More information

High-strength and ultrahigh-strength. Cut sheet from hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine.

High-strength and ultrahigh-strength. Cut sheet from hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine. High-strength and ultrahigh-strength TM steels Cut sheet from hot-rolled steel strip and heavy plate Josef Elmer, Key account manager voestalpine Steel Division www.voestalpine.com/steel Weight savings

More information

STANDARD SPECIFICATION SECTION 15257 STEEL PIPE, FUSION-BONDED EPOXY LINED AND COATED

STANDARD SPECIFICATION SECTION 15257 STEEL PIPE, FUSION-BONDED EPOXY LINED AND COATED STANDARD SPECIFICATION SECTION 15257 STEEL PIPE, FUSION-BONDED EPOXY LINED AND COATED PART 1 - GENERAL 1.01 DESCRIPTION This section includes materials, fabrication, installation, and testing of fusion-bonded

More information

ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE

ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended

More information

LASER CUTTING OF STAINLESS STEEL

LASER CUTTING OF STAINLESS STEEL LASER CUTTING OF STAINLESS STEEL Laser inert gas cutting is the most applicable process type used for cutting of stainless steel. Laser oxygen cutting is also applied in cases where the cut face oxidation

More information

Avoiding Burning Through: Control the Inside Surface Temperature, Not the Pressure

Avoiding Burning Through: Control the Inside Surface Temperature, Not the Pressure Originally published in the Canadian Welding Association Journal, Spring 2013, pp 30 39 Welding on In service Pipelines: Dispelling Popular Myths and Misconceptions Bill Amend Sr. Principal Engineer, Welding

More information

Best Practice in Boiler Water Treatment

Best Practice in Boiler Water Treatment Best Practice in Boiler Water Treatment Boiler Water Treatment Part 2 Internal Treatment Objectives of Internal Water Treatment 1 To control the level of total dissolved solids (TDS) within the boiler

More information

Estimating Welding Preheat Requirements for Unknown Grades of Carbon and Low-Alloy Steels

Estimating Welding Preheat Requirements for Unknown Grades of Carbon and Low-Alloy Steels SUPPLEMENT TO THE WELDING JOURNAL, NOVEMBER 2008 Sponsored by the American Welding Society and the Welding Research Council Estimating Welding Preheat Requirements for Unknown Grades of Carbon and Low-Alloy

More information

Part B Repair Quality Standard for Existing Ships

Part B Repair Quality Standard for Existing Ships Part B Repair Quality Standard for Existing Ships PART B SHIPBUILDING AND REPAIR QUALITY STANDARD FOR EXISTING SHIPS CONTENTS: 1. Scope 2. General requirements to repairs and repairers 3. Qualification

More information

GENERAL PROPERTIES //////////////////////////////////////////////////////

GENERAL PROPERTIES ////////////////////////////////////////////////////// ALLOY 825 DATA SHEET //// Alloy 825 (UNS designation N08825) is a nickel-chromium alloy with additions of molybdenum and copper. It has excellent resistance to both reducing and oxidizing acids, to stress

More information

Sandvik SAF 2707 HD (UNS S32707) a hyper-duplex stainless steel for severe chloride containing environments

Sandvik SAF 2707 HD (UNS S32707) a hyper-duplex stainless steel for severe chloride containing environments (UNS S32707) a hyper-duplex stainless steel for severe chloride containing environments lec ture no. s -51-63. 11/ 20 06 sandvik r ese arch and de velopment centr e Kenneth Göransson, Marie-Louise Nyman,

More information

TECHNICAL DATA SHEET DURO HARD CHROME PLATING PROCESS

TECHNICAL DATA SHEET DURO HARD CHROME PLATING PROCESS TECHNICAL DATA SHEET Duro hard chrome plating process is a high-speed bath which employs a special mixed soluble catalyst and has been developed to meet the modern hard chrome plating requirements. Its

More information