Member of the JSC Tyazhmash Group
|
|
|
- Pierce Owen
- 7 years ago
- Views:
Transcription
1 Member of the JSC Tyazhmash Group
2 Technological and Production Facilities of ČKD Blansko Holding, a.s. We protect and develop traditions since 1698
3 1. Company Introduction 1.1) Hydro-Mechanical Equipment 1.2) Machining and Welding 2. Certificates 3. Production Capabilities 3.1) Machining 3.2) Welding 3.3) Heat treatment 3.4) Surface treatment 3.5) Hand grinding of shaped surfaces 4. Referential Machining Projects 5. Referential Welding Projects
4 1. Company Introduction Key areas of manufacturing expertise 1.1 Hydro equipment has been produced in CKD Blansko since During this period CKD Blansko has gained a strong position among suppliers of hydro electric power plant technologies throughout the world. The total installed capacity exceeds 17.5 GW. Due to our vast experience in the industry we can offer our customers well-proven quality and are able to meet the most demanding requirements, whether in the efficiency of the turbines or in environmental standards. With regard to new hydro equipment or new turbines CKD Blansko can provide custom-made projects from design through manufacturing, assembly, testing and staff training, using own team of experienced professionals.
5 1. Company Introduction 1.1. Hydro equipment Francis runner ZARNOWIEC
6 1. Company Introduction 1.1. Hydro equipment hollow jet AL WEHDAH
7 1. Company Introduction 1.1. Hydro equipment butterfly valves BOHUNICE
8 1. Company Introduction Key areas of manufacturing expertise 1.2 Machining and welding Machining and welding due to the above mentioned specialization of CKD Blansko our technological equipment and know-how allows manufacturing and machining of challenging large parts up to 240 tons. Machining and welding However, CKD Blansko production facilities are also equally well equipped for welding and machining of smaller parts. see below for detail
9 2. CERTIFICATES Company ČKD Blansko was certified: EN ISO 9001 : 2008 Certificate of Management System since 1994 EN ISO : 2004 Certificate of Enviromental Management System Welding Certificate according: DIN DIN DIN
10 3. Production Capabilities 3.1 Machining on lathes, horizontal milling/boring machines, grinding machines 3.2 Manual, semi-automatic/automatic welding 3.3 Heat treatment hardening, tempering and combination of both, annealing and stress relieving 3.4 Surface treatment blasting, metalizing, painting, high pressure spraying, lining with bearing metal 3.5 Hand grinding of shaped surfaces
11 3. Production Capabilities 3.1 Machining Vertical lathes diameter up to mm height up to mm weight up to 250 t Turning machines diameter up to mm length up to mm weight up to 40 t Maximum machining dimensions of non-rotary parts x x mm, weight up to 250 t
12 3. Production Capabilities 3.1 Machining Flat surface grinding and planning of parts up to x mm Spherical surface grinding of parts up to 630 mm in diameter and length up to mm 5 axis machining of surfaces on CNC horizontal milling machines (X = 8 000, Y = 4 150, Z = 1 600)
13 3. Production Capabilities 3.1 Machining 5 axis milling and drilling on CNC machining centre with turning table (X = , Y = 4 000, Z = 1 500) M-ARX TRT50 Operational Space Table Size mm x Machine Travel X-axis mm Y axis (Spindle vertical travel) mm Quill vertical travel (Z axis) mm Table maximum load kg Table longitudinal travel mm Size x width T-slot mm 28 x 225 Travel Axis range of travel mm/min Thrust DaN Spindle Number of revolutions ot/min Spindle Drive Output kw 68 Max.torque Nm 3 300
14 3. Production Capabilities 3.1 Machining 3 axle portal milling and drilling centre MMC 1500 POWER MMC 1500 POWER Operational space Processed piece maximum size mm 1500 x 1000 x 600 Dimension of the table clamping area mm 1500 x 1000 Slide travel in the X axis mm Table travel in the Y axis mm 1000 Ram travel in the Z axis mm 600 Maximum table loading kg 2500 T grooves (quantity x width x span) mm 7 x 18 x 125
15 3. Production Capabilities 3.1 Machining and welding capabilities machining on single column vertical lathe
16 3. Production Capabilities 3.1 Machining and welding capabilities stator frame NESTIL
17 3. Production Capabilities 3.1 Machining and welding capabilities lower bracket ERMENEK
18 3. Production Capabilities 3.2 Welding Welding procedures and operations performed in accordance to requirements of EN ISO , certified by TUV NORD and audited on annual basis since 2001 Production of welded parts is performed in accordance to various product certificates standards with regard to customer s requirements Welding certificate for steel and hydraulic fabrications according to DIN18800 and DIN awarded by SLV Berlin Supervision carried out in accordance to EN ISO standards, supervisors are qualified for adapting welding technology at the level of EWE/IWE, EWT, EWS and EWP Technicians are qualified to compile welding specifications and procedures including WPS documentation
19 3. Production Capabilities 3.2 Welding Welders and operators are qualified and audited on annual basis in accordance to standards EN 287-1, EN 1418 and according to ASME Code Section IX Applied welding technologies for individual welding methods are based on qualified welding specifications compiled with regard to standards EN 288 and EN 156xx (WPAR and WPQR documents) and PQR documents (ASME Code Section IX) Welding is performed on various materials and includes low- and high-alloyed steels, bronze alloys and grey cast-iron Welds are tested in accordance to standards of EN 473, Regulation STD 301/E/95, ASME Code Section V, CCH 70-3, EN standards or other customer s requirements Performance of inner and outer surface weld deposits made by stainless steels or bronze alloys of various properties with various methods
20 3. Production Capabilities 3.2 Welding Welding methods used in CKD Blansko:
21 3. Production capabilities 3.2 Machining and welding capabilities stator frame RPM
22 3. Production capabilities 3.2 Machining and welding capabilities end shield ANDRITZ
23 3. Production capabilities 3.2 Machining and welding capabilities sheaves WORKSYSTEM
24 3. Production capabilities 3.2 Machining and welding capabilities bypass pipe TROLLHEIM
25 3. Production Capabilities 3.3 Heat treatment Hardening and tempering of Carbon, structural and stainless steel parts up to 2 tons in weight and dimensions up to x x mm Annealing of welded structures and castings up to 100 tons in weight and dimensions up to x x mm
26 3. Production capabilities 3.4 Surface finishing and lining with bearing metal Blasting of pieces up to 100 tons in weight and maximum dimensions x4 000 x mm Metallization Surface coating High pressure spraying Lining with bearing metal
27 4. Referential Machining Projects MACHINING Description Country Year of Parametres Delivery 1 Weight (t) Diameter (mm) H x W x L (mm) Bearing housing SHIWA Austria outer and inner wicket barrel NEW NAGGA HAMMADI Germany francis runner blades Slovenia x3300x800 Pelton runners Austria Driving shields Germany Sheaves Russia Spiral pumps Germany Stator frame MELK Austria Stator frame LARONA Austria Driving shields Germany
28 5. Referential Welding Projects STEEL FABRICATIONS Description Country Year of Delivery 1 Parametres Weight (t) Diameter (mm) H x W x L (mm) Ventilator Germany Rotor Spider (4 pcs) Germany Rotor Spider (4 pcs) Germany Parts of the furnaces Germany Gall s chain Czech Republic ,1 - - Gall s chain Czech Republic End shields (2-3 per month) Austria 2003, Stator frame (12 pcs.) Austria 2003, x x Rotor Spider (incl. covers) Austria V = Upper bracket Czech Republic 2004 x x x 4-segment stator frame (for gold mill) Germany segment stator frame (for gold mill) Germany Winding covers, slipring, sealing ring Germany 2005 x x x Stator frame Sweden , V = Suction piping for water turbine Karahnjukar Germany Supports and stands France Turbine case Hart Austria Parts of Kaplan bulb turbine GITANI Germany
29 5. Referential Welding Projects STEEL FABRICATIONS Description Country Year of Delivery 1 Parametres Weight (t) Diameter (mm) H x W x L (mm) Parts of Kaplan compact turbine ÖRJE Germany Inlet casing of Pelton turbine SCHWARZACH Austria Frames of warm press STORD, 7 pcs Czech Republic Stands of rolling line ERSTEMOD, 2 pcs Czech Republic Spiral casing of Francis turbine, QORLORTORSAQ, 2 pcs Austria Turbine casing of Pelton turbine KERASOVO Austria Turbine casing of Pelton turbine LOUMNITSA, 2 pcs Austria Stator frame HORNITOS Austria Stator frame RODUND Austria Stator frame NESTIL Austria segment stator frame SIEMENS Germany Press for iron - parts AKROS Slovakia End shields (one piece per month) Austria End shields (one piece per month) Austria Stator frames, 11 pcs Czech Republic x 2900 x 2900 Stator frame SONICO Austria Thrust bearing brackets France [1] Selected from the year In this table stated most significant deliveries.
30 THANK YOU FOR YOUR ATTENTION ČKD Blansko Holding, a.s. Gellhornova 1, Blansko Czech Republic Tel.:
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
HCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA
HCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA INTRODUCTION HCW 1000 ŠKODA MACHINE TOOL a.s. continues its more than 100 years old tradition of high-precision machine tool manufacturing. Based on market
CNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines
The World Wide partnership for ultimate turning technologies CNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines a brief outline of vertical machines
DET SIGMA PUMPY HRANICE PUMP TURBINES 426 2.98 81.01
SIGMA PUMPY HRANICE PUMP TURBINES DET SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz 426 2.98 81.01 Applications
Machine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
IBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#03 OCT 2014 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET
IBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#0 OCT 04 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET HTL 5 kw, 500 rpm 800 Nm 000 kg High production system Fixed
[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
Metalworking to go. Discover direct on-site mobile machining!
Metalworking to go Discover direct on-site mobile machining! Benefit from intelligent machining methods right on site With Miba s mobile CNC machining units Wherever and whatever you want to machine directly
PARTNERS and RESPONSABILITIES
Location Key Facts Core Business Design and manufacture management of heavy machined steel structures and components for steel mill industry. Sales up to 40 MLN Staff 190 person Area of shops 35.000 m²
Skoda Supercritical Steam Turbine 660 MW
Skoda Supercritical Steam Turbine 660 MW Jiri Fiala Head of Engineering Dept. Skoda Power s.r.o. 27th of October 2010 Vrnjacka Banja - Serbia ŠKODA History Establishment of the company in 1859 Mr. Emil
FRIULFORGIA Srl COMPANY PRESENTATION. We shape your world
FRIULFORGIA Srl We shape your world COMPANY PRESENTATION E-mail: info@friulforgia.it - Web: www.friulforgia.it 1 FRIULFORGIA Foundation and facts Friulforgiaisa privatelyheldcompany, whichstarteditsactivitiesin
Piping Systems for Nuclear Power Industry. Prague, October 2011
Piping Systems for Nuclear Power Industry Prague, October 2011 Introduction of the company Leading Czech supplier of piping systems for power engineering 60 years of experience in the field of power industry
Generators TEM. for small hydroelectric power stations. Electric Machines
Generators for small hydroelectric power stations TEM Electric Machines Advanced solutions for the cleanest energy Reputable manufacturer of generators for small hydroelectric power stations TED Electric
Atling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
A World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction
TA-A BED TYPE MILLING CENTRE
TA-A BED TYPE MILLING CENTRE TA-A BED TYPE MILLING CENTRE MILLING CENTRE HIGH CAPACITY IN A COMPACT MACHINE High stock removal capacity TA-A BED TYPE MILLING CENTRE 2 TA-A The TA-A milling centre is a
That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
![That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance](/thumbs/30/13966838.jpg "That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance")
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
Pressure vessel basics for all engineers
Pressure vessel basics for all engineers by Sharjeel Aslam Faiz 1. Contents 2. Preliminary Design... 3 3. Loads... 3 4. Detailed design... 3 5. Information in-flow to a fabrication drawing... 4 6. Information
Design and manufacturing of Crossflow, Pelton, Kaplan and Francis turbines
Design and manufacturing of Crossflow, Pelton, Kaplan and Francis turbines Founded in 1990 as a manufacturer of hydro power plant equipment In 2005, the company underwent complete modernization and extended
SJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
Zakład Metalowy ALEM. Kołobrzeska 19, 72-320 Trzebiatów, Poland www.alem.pl
Zakład Metalowy ALEM Kołobrzeska 19, 72-320 Trzebiatów, Poland www.alem.pl We as ALEM have many years of experience in processing metals. We offer you a high variety of services in machining, electrical
Pump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford
Pump Skid Fabrication for Magnetic Coupling Rick Soltis Chief Mechanic City of Bedford Contents Magnetic Couplings What They Are, How They Work, Where They re Used Fabrication and Manufacturing of Pump
HOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
DESIGN OF ADAPTIVE MULTI TOOL ARBOR ATTACHMENT
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 6340(Print), ISSN 0976 6340 (Print) ISSN 0976 6359
DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
Wound Rotor Induction Motors 4-12 poles, up to 8000 kw, 11500 HP
Wound Rotor Induction Motors 4-12 poles, up to 8000 kw, 11500 HP ABB The Preferred Partner Egypt Cement Corporation, a major cement manufacturer, has chosen ABB wound rotor motors for all key applications
Engineered Solutions
Engineered Solutions Long established partnerships bring together the world s leading instrumentation companies within BKW. Our manufacturing facility enables us to quickly adapt standard instruments to
YOUR LOCAL SOURCE IN A GLOBAL WORLD YOUR SUPPLIER OF METAL COMPONENTS
YOUR LOCAL SOURCE IN A GLOBAL WORLD YOUR SUPPLIER OF METAL COMPONENTS CASTINGS WELDING FORGINGS CNC PLATE MACHINING CASTINGS WELDING There are many obvious benefits for you by choosing to use castings.
COIL PAC. Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se
COIL PAC Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se Description of the machine Coil Pac 240 und Coil Pac 400 are two types of
SVA SIGMA PUMPY HRANICE SELF PRIMING PUMPS 426 2.98 16.05
SIGMA PUMPY HRANICE SELF PRIMING PUMPS SVA SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +40 581 661 111, fax: +40 581 60 587 Email: sigmahra@sigmahra.cz 46.98 16.05 Applications
Technical Services & Capabilities
Technical Services & Capabilities Machining Welding MIG TIG Robotic TIG Friction Stir Welding Solution Heat Treat & Artificial Aging Assemblies & Fabrication Bike Frame Specialists Technical Services Product
Milling & Machining Centers
Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
INTRODUCTION. Dear Business Partners,
INTRODUCTION Dear Business Partners, We are proud to issue the new catalogue of STROJFERR s.r.o. which was established in 1997 as a genuinely Czech company. In its activities and production programme,
AWS ACHSLAGERWERK Staßfurt GmbH
AWS ACHSLAGERWERK Staßfurt GmbH Contents The Company 2 Products 5 Our own Products 6 Fixed Machinery 11 Certifications 12 Quality Assurance 15 Services 16 History 19 References 20 THE COMPANY AWS Achslagerwerk
BED TYPE MILLING CENTRE
TR BED TYPE MILLING CENTRE TR BED TYPE MILLING CENTRE BED TYPE MILLING CENTRE HIGH PERFORMANCE IN A COMPACT MACHINE PROVIDING ACCURATE COMPLEX MILLING TR BED TYPE MILLING CENTRE The TR milling centre is
Systems and services for small hydro power plants
Systems and services for small hydro power plants Two become one providing more services for you The demand to generate electricity from renewable sources is a global focus. Hydro power has tremendous
Product catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
CNC Portal Milling Machine FZ 50. CNC Power Milling Technology
CNC Portal Milling Machine FZ 5 CNC Power Milling Technology FZ 5 Portal Milling Machine for Heavy Cutting The newly developed portal milling machine FZ 5 is based on a flexible machine design which can
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
Makina ve Teknik Mlz. San. Ve Tic. Ltd. Sti.
SECTION AND PIPE BENDING MACHINES MODEL UPB 10 - - Two Rolls powered - Special cast frame - Shafts are hardened with special steel material - Roll are special steel material - hardened and ground - and
Erich Lacher Präzisionsteile
Nexxus Industriewerbung 2893 12.13 Printed in Germany Erich Lacher Präzisionsteile GmbH & Co. KG Certified by Im Altgefäll 22 D 75181 Pforzheim Phone: +49 (0)7231/6097-0 Fax: +49 (0)7231/6097-60 E-Mail:
M.B.P. due to its extensive experience.is present in many field of activity. OUR SPECIALITY : MACHINING OF MECHANICAL PARTS
M.B.P. due to its extensive experience.is present in many field of activity. To fulfill your projects, our performance concerns are applied at all levels. Our organization, along with the quality of our
Independence Flexibility
Czech Precision Forge, a.s. Tylova 57, 316 00 Plzeň Tel.: +420 378 132 467 Fax: +420 378 132 516 inquiry@cpforge.com www.cpforge.com Independence Flexibility Three characteristics that differentiate Czech
producer of zinc, aluminium, magnesium die casting and plastic moulding
producer of zinc, aluminium, magnesium die casting and plastic moulding FAM Technika Odlewnicza is a modern producer of zinc, aluminium, magnesium die casting and plastic moulding. The Company is one of
Precision components from start to finish. Excellence. in performance-critical machining & fabrications
Precision components from start to finish Excellence in performance-critical machining & fabrications Leading precision machining technology... Fully integrated solutions Facilities and capabilities The
BAUER Manufacturing Inc.
BAUER Manufacturing Inc. Conroe, Texas Supplying Equipment and Services to Industry 2/2013 BAUER Manufacturing Inc. BAUER Manufacturing Inc. (BMC) is located in the City of Conroe, Texas, approximately
SERVICE CONTRACT EXECUTION REVAMP & REBUILD
:: :: :: :: SALES SERVICE CONTRACT EXECUTION REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
indexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD
:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
Commissioning of 87,000-kW Kaplan Turbine and Generator for Otori Power Station
Commissioning of 87,000-kW Kaplan Turbine and Generator for Otori Power Station 126 Commissioning of 87,000-kW Kaplan Turbine and Generator for Otori Power Station Asami Sato Keiichi Goto OVERVIEW: The
O-I DUBI PLANT FANS Quotation Spec Data & Specifications
TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement
V-Series. 4-Way Precision Lathe with Automated Cycles. www.weiler.de. Precision in Every Dimension. New product: the first 4-way precision
Precision in Every Dimension Service New product: the first 4-way precision lathe with automated cycles V-Series 4-Way Precision Lathe with Automated Cycles www.weiler.de Manual/Engine Lathes Cycle-Controlled
Tsurumi BER. Submersible Ejectors
Tsurumi BER 400V 50Hz Submersible Ejectors This submersible ejector is composed of a B type pump and a venturi with diffusor trumpet. The large flow from the pump, first, at high speed, draws and mixes
COMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
with engineered reliability
Pelton turbines Cover picture Machined bucket backside, Workshop, St. Pölten, Austria Model test set up for dynamic measurements Akköy, Turkey Harnessing the power of water Pelton nozzle with engineered
ThyssenKrupp Companhia Siderúrgica do Atlântico, Brazil. Outsourced workshop and maintenance services for integrated steel plant. Metals Technologies
ThyssenKrupp Companhia Siderúrgica do Atlântico, Brazil Outsourced workshop and maintenance services for integrated steel plant Metals Technologies 1 Professional maintenance services for entire steel
Milling and Machining Center Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
CNC Portal Milling Machine FZ 32. High Performance Milling Technology
CNC Portal Milling Machine FZ 32 High Performance Milling Technology FZ 32 HSC Portal Milling Machine with Overhead Gantry with upper moving portal high axial accelerations and perfect surface finishes
Foundry Factory Ltd.
Foundry Factory Ltd. Foundry Factory Ltd. Cast-iron castings Ductile iron castings Non-magnetic cast iron castings Wear resistant cast iron castings Conveyor casting from 10 kg Permanent mold casting up
ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION
ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION SC ELECTROPUTERE SA SC ELECTROPUTERE SA 1. Vision, Mission, Values SC ELECTROPUTERE SA 2. LOCATION Craiova: Located in the South West of the country,
Vegyesipari Kereskedelmi és Szolgáltató kft
Vegyesipari Kereskedelmi és Szolgáltató kft www.kovacskft.hu About Us 1 Introduction Kovacs Ltd. short prezentation Quality Management System 2 Activities Forging plant Turning plant Machining plant 3
Flygt 3068, 50Hz. Technical Specification
Flygt 3068, 50Hz Technical Specification Table of Contents Table of Contents B-pump...2 Product description...2 Motor rating and performance curves...4 C-pump...6 Product description...6 Motor rating
dp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
DMU 75 / 95 monoblock
www.dmgmori.com Five-axis universal milling machines DMU 75 / 95 monoblock High tech as standard Five-axis simultaneous machining at the best price. DMU 75 / 95 monoblock Top features for five-axis simultaneous
ADDA FERreport JANUARY 2015
ADDA FERreport JANUARY 2015 REPORT 2015 PREVIEW COMPLETE TUBE MILL TM8 FOR VIETNAM FABTECH & METAL EXPO 2014 JANUARY 2015 2015 PREVIEW The year 2014 has closed in a positive way for Adda Fer Meccanica,
Cooking at the Speed of light!
Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide
CNC Vertical Machining Center V-Mill CNC Large box-way and linear guide way machines
CNC Vertical Machining Center Large box-way and linear guide way machines Technical Datasheet CNC Vertical Machining Center Large box-way and linear guide way machines Spindle gear drive (50-taper) for
KEYWORDS Micro hydro turbine, Turbine testing, Cross flow turbine
DEVELOPMENT OF COST EFFECTIVE TURBINE FOR HILLY AREAS [Blank line 11 pt] A. Tamil Chandran, Senior Research Engineer Fluid Control Research Institute, Kanjikode west, Plalakkad, Kerala, India tamilchandran@fcriindia.com
Metal Pressfitting Pipe Systems
VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing
Permanent Magnetic Generator Construction Manual
Permanent Magnetic Generator Construction Manual http://hojomotor.com Our Team Doing an On-site Assembly in Peru http://hojomotor.com Section 1) Introduction This manual describes how to build a 'permanent
FRICTION MATERIALS & BONDING SERVICES
FRICTION MATERIALS & BONDING SERVICES World Class Friction Materials & Bonding Services The Industry Leader Midwest Brake has been a leading supplier of non asbestos industrial friction material and bonding
14. Mechanisation. and Welding Fixture
14. Mechanisation and Welding Fixture 14. Mechanisation and Welding Fixtures 197 As the production costs of the metal-working industry are nowadays mainly determined by the costs of labour, many factories
V&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
HYDROMATRIX Jebel Aulia - Sudan
HYDROMATRIX Jebel Aulia - Sudan www.andritz.com HYDROMATRIX - Concept Jebel Aulia - Sudan HYDROMATRIX is a new concept of hydraulic energy generation, which has been developed by an American engineer in
Eurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
The Boxford range of 3-axis CNC Machining Centres are
The Boxford range of 3-axis CNC Machining Centres are requirements. Featuring a high-end machine controller, utilising the latest motion control technology, they can satisfy all your 2½ and 3D milling
Markets, where ZMM BULGARIA HOLDING is well known!
Markets, where ZMM BULGARIA HOLDING is well known! 1-3 INDUSTRIAL HOLDING BULGARIA 4-19 UNIVERSAL LATHES 20-35 UNIVERSAL LATHES WITH VARIABLE SPINDLE SPEED CONTROL 36-37 OIL COUNTRY LATHES 38-47 CNC LATHES
DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE FABRICATION, MACHINING, METAL CASTING, LOAD TESTING, SAND BLASTING & PAINTING,
Pierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013
Pierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013 Agenda Dubuc works: location and overview MMC fabrication process at Rio Tinto Alcan Boralcan product caracteristics
Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
Highly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
Impact Testing Systems
The more intelligent solution... Impact Testing Systems The more intelligent solution... Tronjestraße 8, 44219 Dortmund Tel.: +49 231 912980 0 Fax.: +49 231 179855 www.coesfeld.com mail@coesfeld.com Introduction
Precise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
ANDANTEX USA INC. 2 Speed Spindle Gearboxes MSD RAM-MSD
NDNTEX US INC. 2 Speed Spindle Gearboxes SD R-SD CHINE TOOL Spindle Drive Gearboxes SD & R-SD Overview - Principle IPROVING THE PRODUCTI- VITY WHILE KEEPING THE HIGHEST PRECISION REDEX-NDNTEX s two speed
ZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04
SIGMA UMY HRANICE GEAR UMS SIGMA UMY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz, 426 1.99 21.04 Application In
Backflush filter R8-30W
Backflush filter R8-30W With internal pressure segment cleaning, rated pressure to 40 bar (580 psi) Connection sizes: DN 200 to DN 500, welded design 1. Features Powerful, fully automatic filtration _
METALWORKING PRODUCTS. Deep hole drilling Product catalogue and application guide
METALWORKING PRODUCTS Deep hole drilling Product catalogue and application guide AB Sandvik Coromant Not only a tool supplier Sandvik Coromant is the No.1 supplier of cutting tools for the metalworking
Technical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels