Data sheet. Solenoid valves 3/2-way direct-operated Type EV310B. August 2001 DKACV.PD.200.J B1025
|
|
|
- Claud Owens
- 7 years ago
- Views:
Transcription
1 Data sheet Solenoid valves 3/2-way direct-operated Type EV310B August 2001 DKACV.PD.200.J B1025
2 De-energized closed Type EV310B NC DN B G 1 / 8 G 1 / 4 G 3 / 8 Features Very robust valves for industrial application, such as control For water, oil, compressed air and similar neutral media K v value up to 0.40 m³/h Differential pressure: Up to 20 bar Viscosity: Up to 50 cst Ambient temperature: Up to +40 C Coil enclosure: Up to IP 65 Connections: G 1 / 8 and G 3 / 8 and flanges Technical data Installation Pressure range Max. test pressure Time to open and to close Ambient temperature Medium temperature Optional, but vertical solenoid system is recommended 0 to 20 bar 50 bar ms (depending on the pressure) max. +40 C 10 to +100 C Viscosity max. 50 cst Materials Valve body: Brass, W.no Armature: Stainless steel, W.no / AISI 430FR Armature tube: Stainless steel, W.no / AISI 304L Armature stop: Stainless steel, W.no / AISI 430FR Springs: Stainless steel, W.no / AISI 301 Seal material: See specific valve data Coil options Type BD 15 W ac Type BA 9 W ac / 15 W dc Danfoss also offers EEx m II T4 coils for use in explosion risk areas - please see coil data sheet DKACV.PD.600.A See DKACV.PD.600.A Dimensions and weight Thread A B Weight without coil ISO 228/1 [mm] [mm] [kg] G 1 /8-1 /4-3 / DKACV.PD.200.J3.02
3 G 1 / 8 G 1 / 4 Type EV310B NC DN B De-energized closed Function 1. Coil 2. Armature 3. Closing spring 4: Valve plate P: Pressure port (1) A: Application port (2) R: Relief port (3) Coil voltage disconnected (closed): When the voltage to the coil (1) is disconnected, the armature (2) with the valve plates (4) is pressed down by the closing spring (3) and closes the connection between P and A. At the same time, the connection between ports A and R is opened. The connection between P and A will be closed for as long as the voltage to the coil is disconnected. On valves with manual override the connection between P and A can be opened using an opening screw in the valve body. Coil voltage connected (open): When voltage is applied, the armature (2) with the valve plates (4) is lifted and closes the connection between A and R. At the same time, the connection between P and A is opened. The connection between P and A will be open for as long as there is voltage to the coil. EV 310B, NC versions for AC (50 / 60 Hz) and DC Brass bodies Connec- Seal Kv DN Media temp Type designation * Code no. Permissible differential tions mate- Min. Max. Main type Specification without pressure (bar)/coil Type rial coil BA BD ** 9W 15W 15W m 3 /h mm C C a.c. d.c. a.c. G1/8 FKM , EV310B 1,5 B G 18 F NC U G1/8 FKM , EV310B 2,0 B G 18 F NC U G1/8 FKM , EV310B 3,0 B G 18 F NC U G1/4 FKM EV310B 1,5 B G 14 F NC U G1/4 FKM EV310B 2,0 B G 14 F NC U G1/4 FKM EV310B 3.0 B G 14 F NC U G1/4 FKM EV310B 3.5 B G 14 F NC U G 3/8 FKM EV310B 2,0 B G 38 F NC U G 3/8 FKM EV310B 3,0 B G 38 F NC U G 3/8 FKM EV310B 3.5 B G 38 F NC U Including manual override G1/8 FKM , EV310B 1,5 B G 18 F NC U G1/8 FKM , EV310B 2,0 B G 18 F NC U G1/8 FKM , EV310B 3,0 B G 18 F NC U G1/4 FKM EV310B 1,5 B G 14 F NC U G1/4 FKM EV310B 2,0 B G 14 F NC U G1/4 FKM EV310B 3.0 B G 14 F NC U G1/4 FKM EV310B 3.5 B G 14 F NC U * The EV310B NC is also available in stainless steel bodies, please contact Danfoss for further details. **EPDM and NBR available as option Ordering - coils See separate data sheet for coils DKACV.PD.600.A DKACV.PD.200.J3.02 3
4 De-energized open Type EV310B NO DN B G 1 / 8 G 1 / 4 G 3 / 8 Features Very robust valves for industrial application, such as control For water, oil, compressed air and similar neutral media K v value up to 0.40 m³/h Differential pressure: Up to 20 bar Viscosity: Up to 50 cst Ambient temperature: Up to +40 C Coil enclosure: Up to IP 65 Thread connections: G 1 / 8 and G 3 / 8 Technical data Installation Optional, but vertical solenoid system is recommended Pressure range Max. test pressure Time to open and to close Ambient temperature Medium temperature 0 to 20 bar 50 bar ms (depending on the pressure) max. +40 C 10 to +100 C Viscosity max. 50 cst Materials Valve body: Brass, W.no Armature: Stainless steel, W.no / AISI 430FR Armature tube: Stainless steel, W.no / AISI 304L Armature stop: Stainless steel, W.no / AISI 430FR Springs: Stainless steel, W.no / AISI 301 Seal material: See specific valve data Coil options Type BD Type BA 15 W ac 9 W ac / 15 W dc See DKACV.PD.600.A Danfoss also offers EEx m II T4 coils for use in explosion risk areas - please see coil data sheet DKACV.PD.600.A Dimensions and weight Thread A B Weight without coil ISO 228/1 [mm] [mm] [kg] G 1 /8-1 /4-3 / DKACV.PD.200.J3.02
5 G 1 / 8 G 1 / 4 Type EV310B NO DN B De-energized open Function 1. Coil 2. Armature 3. Opening spring 4. Valve plate R:Relief port (3) A:Application port (2) P:Pressure port (1) Coil voltage disconnected (open): When the voltage is disconnected, the armature (2) with the valve plates (4) is pressed down by the opening spring (3) and closes the connection between A and R. At the same time, the connection between ports P and A is open. The connection between P and A will be open for as long as the voltage to the coil is disconnected. On valves with manual override the connection between P and A can be closed using a closing screw in the valve body. Coil voltage connected (closed): When voltage is applied to the coil (1), the armature (2) with the valve plates (4) is lifted and closes the connection between P and A. At the same time, the connection between ports A and R is opened. The connection between P and A will be closed for as long as there is voltage to the coil. EV 310B NO versions for AC (50Hz) and DC Brass bodies Connections Seal Kv DN Media temp Type designation Code no. Permissible differential mate- Min. Max. Main type Specification without pressure (Bar)/Coil type rial coil BA BD ** 9W 15W 15W m 3 /h mm C C a.c. d.c. a.c. G1/8 FKM , EV310B 1,5 B G 18 F NO U G1/8 FKM , EV310B 2,0 B G 18 F NO U G1/8 FKM , EV310B 3,0 B G 18 F NO U G1/4 FKM EV310B 1,5 B G 14 F NO U G1/4 FKM EV310B 2,0 B G 14 F NO U G1/4 FKM EV310B 3.0 B G 14 F NO U G1/4 FKM EV310B 3.5 B G 14 F NO U G 3/8 FKM EV310B 2,0 B G 38 F NO U G 3/8 FKM EV310B 3,0 B G 38 F NO U G 3/8 FKM EV310B 3.5 B G 38 F NO U Including manual override G1/8 FKM , EV310B 1,5 B G 18 F NO U G1/8 FKM , EV310B 2,0 B G 18 F NO U G1/8 FKM , EV310B 3,0 B G 18 F NO U G1/4 FKM EV310B 1,5 B G 14 F NO U G1/4 FKM EV310B 2,0 B G 14 F NO U G1/4 FKM EV310B 3.0 B G 14 F NO U G1/4 FKM EV310B 3.5 B G 14 F NO U **EPDM and NBR available as option DKACV.PD.200.J3.02 5
6 De-energized closed Type EV310B NC FL DN B Flange mm Features Very robust valves for industrial application, such as control For water, oil, compressed air and similar neutral media K v value up to 0.30 m³/h Differential pressure: Up to 20 bar Viscosity: Up to 50 cst Ambient temperature: Up to +40 C Coil enclosure: Up to IP 65 Flange connection: mm Technical data Installation Optional, but vertical solenoid system is recommended Pressure range Max. test pressure Time to open and to close Ambient temperature Medium temperature 0 to 20 bar 50 bar ms (depending on the pressure) max. +40 C 10 to +100 C Viscosity max. 50 cst Materials Valve body: Brass, W.no Armature: Stainless steel, W.no / AISI 430FR Armature tube: Stainless steel, W.no / AISI 304L Armature stop: Stainless steel, W.no / AISI 430FR Springs: Stainless steel, W.no / AISI 301 Seal material: See specific valve data Coil options Danfoss also offers EEx m II T4 coils for use in explosion risk areas - please see coil data sheet DKACV.PD.600.A Type BD 15 W dc Type BA 9 W ac / 15 W dc See DKACV.PD.600.A Dimensions and weight Bottom view Weight: kg 6 DKACV.PD.200.J3.02
7 Flange mm Type EV310B NC FL DN B De-energized closed Function 1. Coil 2. Armature 3. Closing spring 4: Valve plate P: Pressure port (1) A: Application port (2) R: Relief port (3) Coil voltage disconnected (closed): When the voltage to the coil (1) is disconnected, the armature (2) with the valve plates (4) is pressed down by the closing spring (3) and closes the connection between P and A. At the same time, the connection between ports A and R is opened. The connection between P and A will be closed for as long as the voltage to the coil is disconnected. On valves with manual override the connection between P and A can be opened using an opening screw in the valve body. Coil voltage connected (open): When voltage is applied, the armature (2) with the valve plates (4) is lifted and closes the connection between A and R. At the same time, the connection between P and A is opened. The connection between P and A will be open for as long as there is voltage to the coil. Connec- Seal Kv DN Media temp Type designation Code no. Permissible differential tions mate- Min. Max. Main type Specification without pressure (Bar)/Coil Type rial coil BA BD ** 9W 15W 15W m 3 /h mm C C a.c. d.c. a.c. Flange 32x32 FKM EV310B 1,5 B FL32 F NC U Flange 32x32 FKM EV310B 2,0 B FL32 F NC U Flange 32x32 FKM EV310B 3,0 B FL32 F NC U Including manual override Flange 32x32 FKM EV310B 1,5 B FL32 F NC U Flange 32x32 FKM EV310B 2,0 B FL32 F NC U ** Suitable for oil, water and air. Ordering - coils See separate data sheet for coils DKACV.PD.600.A Base plate See page 10 DKACV.PD.200.J3.02 7
8 De-energized open Type EV310B NO FL DN B Flange mm Features Very robust valves for industrial application, such as control For water, oil, compressed air and similar neutral media K v value up to 0.30 m³/h Differential pressure: Up to 20 bar Viscosity: Up to 50 cst Ambient temperature: Up to +40 C Coil enclosure: Up to IP 65 Flange connection: mm and base plate on reques - please contact Danfoss Technical data Installation Optional, but vertical solenoid system is recommended Pressure range Max. test pressure Time to open and to close Ambient temperature Medium temperature 0 to 10 bar 50 bar ms (depending on the pressure) max. +40 C 10 to +100 C Viscosity max. 50 cst Materials Valve body: Brass, W.no Armature: Stainless steel, W.no / AISI 430FR Armature tube: Stainless steel, W.no / AISI 304L Armature stop: Stainless steel, W.no / AISI 430FR Springs: Stainless steel, W.no / AISI 301 O-rings/valve plate: NBR Coil options Type BD 15 W dc Type BA 9 W ac / 15 W dc Danfoss also offers EEx m II T4 coils for use in explosion risk areas - please see coil data sheet DKACV.PD.600.A See DKACV.PD.600.A Dimensions and weight Bottom view Weight: kg 8 DKACV.PD.200.J3.02
9 Flange mm Type EV310B NO FL DN B De-energized open Function 1. Coil 2. Armature 3. Opening spring 4. Valve plate R: Relief port (3) A: Application port (2) P: Pressure port (1) Coil voltage disconnected (open): When the voltage is disconnected, the armature (2) with the valve plates (4) is pressed down by the opening spring (3) and closes the connection between A and R. At the same time, the connection between ports P and A is open. The connection between P and A will be open for as long as the voltage to the coil is disconnected. On valves with manual override the connection between P and A can be closed using a closing screw in the valve body. Coil voltage connected (closed): When voltage is applied to the coil (1), the armature (2) with the valve plates (4) is lifted and closes the connection between P and A. At the same time, the connection between ports A and R is opened. The connection between P and A will be closed for as long as there is voltage to the coil. Connec- Seal Kv DN Media temp Type designation Code no. Permissible differential tions mate- Min. Max. Main type Specification without pressure (Bar)/Coil Type rial coil BA BD ** 9W 15W 15W m 3 /h mm C C a.c. d.c. a.c. Flange 32x32 FKM EV310B 1,5 B FL32 F NO U Flange 32x32 FKM EV310B 2,0 B FL32 F NO U Flange 32x32 FKM EV310B 3,0 B FL32 F NO U Including manual override Flange 32x32 FKM EV310B 1,5 B FL32 F NO U Flange 32x32 FKM EV310B 2,0 B FL32 F NO U Ordering - coils See separate data sheet for coils DKACV.PD.600.A Base plate See page 11 DKACV.PD.200.J3.02 9
10 A ports: G 1 / 8 P port: G 1 / 4 Features Base plates and spare parts for solenoid valves 3/2-way direct-operated type EV310B Single base or manifold The base plates are an ideal solution to build up compact EV310B FL valve groups with a common supply. The brass base plates have a full-length P-drilling to supply up to 6 valves. Likewise, the base plates have up to 6 A ports. The connection from the common P-drilling to each A port is controlled by an EV310B valve mounted on the base plate s mm flange counterpart above the A port. The common P port has a G 1 / 4 thread. The A ports have G 1 / 8 threads. Dimensions Possible no. of P port: A ports: L L1 valves ISO 228/1 ISO 228/1 [mm] [mm] 1 G 1 /4 G 1 / G 1 /4 G 1 / G 1 /4 G 1 / G 1 /4 G 1 / G 1 /4 G 1 / G 1 /4 G 1 / Ordering, base plate Possible no. of EV310B FL valves Code no. 032H H H H H H8245 Cover plate Cover plate for 32 x 32 flange connection including O-rings and mounting screws. Spare parts kit The spare parts kit comprises an armature with mounted spring. Code no. 032H8251 Type Code no. Seal Material Thread conn. Fl. version NC 032U U2034 FKM NO 032U U2036 FKM 10 DKACV.PD.200.J3.02
11 DKACV.PD.200.J3.02 AC-VM/hat 11
12 12 DKACV.PD.200.J3.02
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
.55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard
Solenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
type V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
3/2-way pneumatic cartridge solenoid valve
3/2-way pneumatic cartridge solenoid valve Compact design with 11 mm width per station Orifices from 0.5 mm (9 bar) to 1.2 mm (1.5 bar) High durability and reliability Low power consumption, as well as
STC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting
STC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting Female NPT Thread 3/8 OD Tube 3/8 Push-In Fitting 2P050 Series Solenoid Valve Specifications Valve Model 2P050-1/4 2P050-3/8
SOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
STC 3S012-020-A Series Solenoid Valves
STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
Thermostatic element RAVV for 2-way valves
Description / Application RAVV is a self-acting thermostatic element which can be combined with 2-way valve bodies RAV-/8, VMT-/8 or VMA 15. RAVV is used to control temperatures in small hot water cylinders
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
Data sheet ECC 12 and 22
Application ECC is an electronic room temperature controller for water-based systems. ECC can control - fan-coil units - inductions units - air conditioning systems - small ventilating systems - 2-pipe
MAKING MODERN LIVING POSSIBLE. Thermostatic valve AVTA. Technical brochure
MAKING MODERN LIVING POSSIBLE Thermostatic valve AVTA Technical brochure 2 IC.PD.500.A3.02-520B3728 Danfoss A/S 07-2009/ RA-MC/mr Contents Page Features............................................................................................4
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250
MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Valve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
Series 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
Valves. Sub-Base Mounted Valves to ISO 5599/2
Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great
Thermostatic actuator RAVI - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVI is self-acting thermostatic actuator primarily for use for temperature control
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
TA-FUS1ON. Fully adjustable Kvs control and balancing valves. That s just two good.
TA-FUS1ON Fully adjustable Kvs control and balancing valves. That s just two good. Supported by the Reece hvac-r network. Through our 36 stores around Australia, Reece hvac-r is committed to supporting
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
Thermostatic valve Type AVTA
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending on the setting and the sensor temperature. The
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
Solenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4
SPOO & SV VAVS monostable / bistable function threaded ports -G 1/ 5/-5/3 Series 1 FATURS Reliability: steel spool & sleeve technology with long service life Robust valve design, particularly recommended
Directional seated valves type VP 1
Directional seated valves type VP 1 zero leakage, intended for general hydraulic applications and grease lubing systems Flow Q max Operation pressure p max = 15 lpm = 400 bar Individual valve Individual
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
Miniature Pneumatic Solenoid Valve. Power Options: 0.5 Watt (6 psig model) 1.0 Watt (30, 100 psig model) Voltage Options: 3, 5, 12 or 24 VDC
8mm Solenoid Valve Typical Applications Portable Equipment Blood Pressure Monitoring Wound Therapy Air and Oxygen Delivery Sensor Zeroing Product Specifications Mechanical Valve Type: 3-Way, Solenoid-actuated
UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm
VSO MAX HP High Flow Proportional Valve
VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties
Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
Automatic Bypass Control AVDO
Application AVDO is a self-acting constant flow control primarily used either to maintain minimum flow rates through e.g. a low-capacity gas boiler or to control the differential pressure in a central
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
2.12. page 223 2.12. Products for Explosion hazardous Environment
2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available
Hydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications. The
HENRY TECHNOLOGIES - OIL LEVEL REGULATORS (CONVENTIONAL)
HENRY TECHNOLOGIES - OIL LEVEL REGULATORS (CONVENTIONAL) The oil level regulator controls the oil level in the compressor crankcase with a float operated valve. Oil level regulators are designed to attach
3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
Plastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
Thermostatic Sensor RAS-C² with RA-FN Radiator Valve (Fixed Capacity)
Data Sheet Thermostatic Sensor RAS-C² with RA-FN Radiator Valve (Fixed Capacity) Application RAS-C² thermostatic sensor RA-FN angle valve The RAS-C² thermostatic sensor is a selfactuating proportional
Control- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow
MANTA Piston Distributor for Oil and Fluid Grease
MANTA Piston Distributor for Oil and Fluid Grease Function Piston distributors meter out and distribute the oil delivered by an intermittently actuated pump. The quantities of oil for the individual lube
STAUFF. Pressure Switches. Local Solutions for Individual Customers Worldwide
STAUFF Pressure Switches Local Solutions for Individual Customers Worldwide Stauff Pressure Switches Stauff pressure switches are versatile, economically priced units with good hysteresis characteristics.
UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
G1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
ORLANDO srl. M P R 50 025 OPTIMA Radial pressure gauges for swimming-pools 0-2,5 Bar
Chiavari (Ge) - Italia Tel.: Italia + 0185 + 38.50.10 Fax: Italia + 0185 + 38.50.11 e-mail: orlando@orlando.it Http://www.orlando.it M R 50...: Radial pressure gauge ø 50 ( available scale in bar: 4, 6,10,12,16
Eco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
Eco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV
Temperature sensor with integrated transmitter for industrial applications, MBT 3560
Temperature sensor with integrated transmitter for industrial applications, MBT 3560 Technical brochure Features Designed for use in harsh industrial enviroments where reliable, robust and accurate equipment
Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
Solenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
SITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
2/2 & 3/2 Solenoid operated valves
2/2 & 3/2 Solenoid operated valves Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Grey cast iron Plastic resin PVDF Solenoids IP Protection class IP65 (with connector) Buschjost
2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications
Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Compact pressure switch Flameproof enclosure Ex d Model PCA
Mechatronic pressure measurement Compact pressure switch Flameproof enclosure Ex d Model PCA WIKA data sheet PV 33.31 for further approvals see page 4 Process Compact Series Applications Pressure monitoring
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
XE70 SERIES VC SERIES BALANCED HYDRONIC VALVES 2-WAY AND 3-WAY
XE70 SERIES VC SERIES BALANCED HYDRONIC VALVES 2-WAY AND 3-WAY PRODUCT SPECIFICATION SHEET switched off. This results in energy savings during mild weather. Normal control will resume when T3 fails to
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () NBR aluminium AA series/u1-u,5
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50