Hands On Exercise Using the SHA Detail Model (Bridge)

Size: px
Start display at page:

Download "Hands On Exercise Using the SHA Detail Model (Bridge)"

Transcription

1 Let s look at an example: Hands On Exercise Using the SHA Detail Model (Bridge) In this exercise, the standard shadetail2d.dgn has been used to create a new file (pbr- BD01_chapter2.dgn). Additional elements have been added to the file to assist in understanding this concept. For example, elements may be drawn anywhere in the design file, however labels have been placed at the locations that we are going to place the elements. This is so we can easily remember the scale of the elements placed. 1. Open the file C:\Training\Chapter2\pBR-BD01_final.dgn This file shows what we will be working toward in this exercise. Notice that although the blocks in the file are drawn in different scales, the dimension text is the same size. We will see how the block can be drawn in true size and the model concept will display the block at the scaled size and all the dimensions will be automatically scaled to display at the correct size on the final plotted sheet. Note: Keep in mind that due to time constraints, this is a very simple example, we will only be drawing squares to demonstrate this workflow. On a project detail sheet the workflow would be the same, although the details would be more involved. Adding Elements 2. Open the file C:\Training\Chapter2\pBR-BD01_chapter2.dgn This file was created using the File Naming Wizard and selecting the Bridge/Structure Details description. Notice that we are currently in the Default model which has an associated scale of 1 =1 : We are going to draw a simple MicroStation element. Before we draw the element we want to specify the scale of our individual detail by selecting the appropriate model. 3. Select the 1 =1-0 Architectural Scale from the IDS Main Menu. 2-30

2 We are going to draw a 3 x3 block near the area of the 1 Scale text in the file. 4. Select the MicroStation Place Block tool from the main tool frame. 5. Data point at the location of the lower left corner of our block. Notice the AccuDraw compass appears. 6. While moving the pointer to the right, type 3 on the keyboard. This locks the X value of our block at Move the pointer vertically and type 3 on the keyboard. This locks the Y value of our block at 3. Adding Text and Dimensions Next we will add titles and dimensions to our detail using text and dimension styles. We are not going to use Barmenu to place these elements because many of the detailing items for this particular workflow are not currently included in the available features from the IDS Main Menu. 8. From the MicroStation main toolbox, select the Place Text tool. 9. In the tool settings window, select the text style Leroy_ In the text editor window, type Scal e : 1 = Place the detail title below the detail drawn previously. 12. From the MicroStation main toolbox, select the Dimension Element tool. 13. Expand the tool settings window if necessary and toggle ON the Association option. Important: If the Association option is unavailable, turn on the Association lock. 2-31

3 14. Set the dimension style to Structural. 15. Follow the prompts in the MicroStation status bar to dimension the detail. Drawing the Additional Scaled Details 16. Set the drawing scale to ¾ = Repeat steps 5-16 to place the detail, title and dimensions on the 3/4 =1-0 detail. 18. Set the drawing scale to ½ = Repeat steps 5-16 to place the detail, title and dimensions on the 1/2 =1-0 detail. Associated Dimensions Because we chose to associate our dimensions when they were placed, if the element changes, the dimension will automatically update to reflect the element change. 20. Select the ½ =1-0 model. 21. Use the Modify Element tool to change element in the ½ =1-0 detail. 22. Review the result. 23. Close the file. In Chapter 4 we will add a border to these details. 3D and 2D Files MicroStation V8 eliminates the pitfalls many users faced with 2D vs. 3D files in V7. For example, grading files are often drawn in 3D; however, horizontal design files are often drawn in 2D. The grading file would have to be flattened in order to reference it into the horizontal design file. The 3D file would have to be exported to 2D, thereby creating a duplicate grading file. Any changes in the 3D file would have to be updated in the 2D copy. With V8, that 3D grading file can be referenced into the 2D horizontal design file with no problem. There is no longer the need for duplicate files in MicroStation V

4 Chapter 4: Reference Files Hands-on Exercise: Adding a Border to the Detail Model In this exercise we will add the border to the Detail model we created in Chapter Open the file C:\Training\Chapter2\pBR-BD01_chapter2.dgn The border we are going to use should be attached to the Default model since the Default model is nested into every other scaled model. By attaching it to the Default model, the border will be visible in any other model with no other input from the user. 2. Switch to the Default model if necessary by using the View Groups dialog. 3. Access the Attach Reference tool from the reference file dialog. 4. Browse to the border file (C:\Training\Chapter2\xBL-0000_chapter2.dgn). 5. Make sure the Save Relative Path is toggled ON and press the OK button. We need to specify the border we want to use on our plan sheet. We will do this by selecting the appropriate model to reference. 7. In the Model portion of the Reference Attachment Settings dialog, select Structures. 8. In the Orientation portion of the dialog, select the Top Standard View. 9. Set the Scale (Master:Ref) field to reflect our 1 =1 scale plan sheets type 1 in the first scale field and hit the TAB key on your keyboard. 10. Ensure the True Scale toggle is ON. 11. Set the Nested Attachments option to Copy Attachment and the Depth to 1. The dialog should look similar to the one shown below: 4-22

5 Chapter 4: Reference Files 12. Press the OK button. 13. Place the border in the file and move if necessary. 14. Fit the MicroStation View. 4-23

How to create pop-up menus

How to create pop-up menus How to create pop-up menus Pop-up menus are menus that are displayed in a browser when a site visitor moves the pointer over or clicks a trigger image. Items in a pop-up menu can have URL links attached

More information

Appendix D - Workflows / Tips and Tricks

Appendix D - Workflows / Tips and Tricks Appendix D - Workflows / Tips and Tricks It is a well known fact that most users of software applications use only a small amount of the commands and tools available to them. CDOT has created a Tips and

More information

Microsoft Expression Web

Microsoft Expression Web Microsoft Expression Web Microsoft Expression Web is the new program from Microsoft to replace Frontpage as a website editing program. While the layout has changed, it still functions much the same as

More information

Intro to Excel spreadsheets

Intro to Excel spreadsheets Intro to Excel spreadsheets What are the objectives of this document? The objectives of document are: 1. Familiarize you with what a spreadsheet is, how it works, and what its capabilities are; 2. Using

More information

How to build text and objects in the Titler

How to build text and objects in the Titler How to build text and objects in the Titler You can use the Titler in Adobe Premiere Pro to create text and geometric objects. There are three methods for creating text, each capable of producing either

More information

How To Create A View Frame In 3D

How To Create A View Frame In 3D 12/4/2008-10:00 am - 11:30 am Room:Palazzo O-P (5th) The Secrets of Cutting Plan and Profile Sheets in AutoCAD Civil 3D Michelle Rasmussen - Application Engineer, IMAGINiT Technologies CV304-1P In this

More information

Microsoft Access 2010 Overview of Basics

Microsoft Access 2010 Overview of Basics Opening Screen Access 2010 launches with a window allowing you to: create a new database from a template; create a new template from scratch; or open an existing database. Open existing Templates Create

More information

Sample Table. Columns. Column 1 Column 2 Column 3 Row 1 Cell 1 Cell 2 Cell 3 Row 2 Cell 4 Cell 5 Cell 6 Row 3 Cell 7 Cell 8 Cell 9.

Sample Table. Columns. Column 1 Column 2 Column 3 Row 1 Cell 1 Cell 2 Cell 3 Row 2 Cell 4 Cell 5 Cell 6 Row 3 Cell 7 Cell 8 Cell 9. Working with Tables in Microsoft Word The purpose of this document is to lead you through the steps of creating, editing and deleting tables and parts of tables. This document follows a tutorial format

More information

How to create buttons and navigation bars

How to create buttons and navigation bars How to create buttons and navigation bars Adobe Fireworks CS3 enables you to design the look and functionality of buttons, including links and rollover features. After you export these buttons from Fireworks,

More information

Practice Workbook. QuickStart for Roadway Modeling Using OpenRoads

Practice Workbook. QuickStart for Roadway Modeling Using OpenRoads Practice Workbook This workbook is designed for use in Live instructor-led training and for OnDemand selfstudy. The explanations and demonstrations are provided by the instructor in the classroom, or in

More information

Workflow MP 1- MicroStation Printing

Workflow MP 1- MicroStation Printing Workflow MP 1- MicroStation Printing This document guides you through the basic functions of MicroStation printing. It is used for printing single sheets on a sheet by sheet basis. See workflow document

More information

PLAY VIDEO. Close- Closes the file you are working on and takes you back to MicroStation V8i Open File dialog.

PLAY VIDEO. Close- Closes the file you are working on and takes you back to MicroStation V8i Open File dialog. Chapter Five Menus PLAY VIDEO INTRODUCTION To be able to utilize the many different menus and tools MicroStation V8i offers throughout the program and this guide, you must first be able to locate and understand

More information

CDOT Monumentation Sheets

CDOT Monumentation Sheets CDOT Monumentation Sheets This document describes the process used to assemble a Right of Way Monumentation Sheet. An InRoads XML report is used to display the required data from the geometry project.

More information

Exporting emails from Outlook Version 1.00

Exporting emails from Outlook Version 1.00 Exporting emails from Outlook Version 1.00 The rapid growth in volume of emails means that there is a growing need to archive old emails to media such as external hard disks and DVD s. The document will

More information

Get-Snap. Once you have installed the DataCAD 9.03 update, you are ready to take advantage of this new feature.

Get-Snap. Once you have installed the DataCAD 9.03 update, you are ready to take advantage of this new feature. DATACAD LLC TECHNICAL BULLETIN Software for Architecture Get-Snap (For DataCAD 9.03 and later) The new Get-Snap feature allows you to input distances relative to other objects in the drawing. This allows

More information

Intellect Platform - Tables and Templates Basic Document Management System - A101

Intellect Platform - Tables and Templates Basic Document Management System - A101 Intellect Platform - Tables and Templates Basic Document Management System - A101 Interneer, Inc. 4/12/2010 Created by Erika Keresztyen 2 Tables and Templates - A101 - Basic Document Management System

More information

Transitioning from TurningPoint 5 to TurningPoint Cloud - LMS 1

Transitioning from TurningPoint 5 to TurningPoint Cloud - LMS 1 Transitioning from TurningPoint 5 to TurningPoint Cloud - LMS 1 A Turning Account is a unique identifier that is used to tie together all software accounts and response devices. A Turning Account is required

More information

Click on various options: Publications by Wizard Publications by Design Blank Publication

Click on various options: Publications by Wizard Publications by Design Blank Publication Click on various options: Publications by Wizard Publications by Design Blank Publication Select the Blank Publications Tab: Choose a blank full page Click on Create New Page Insert > Page Select the number

More information

What s New V 11. Preferences: Parameters: Layout/ Modifications: Reverse mouse scroll wheel zoom direction

What s New V 11. Preferences: Parameters: Layout/ Modifications: Reverse mouse scroll wheel zoom direction What s New V 11 Preferences: Reverse mouse scroll wheel zoom direction Assign mouse scroll wheel Middle Button as Fine tune Pricing Method (Manufacturing/Design) Display- Display Long Name Parameters:

More information

How to use MS Excel to regenerate a report from the Report Editor

How to use MS Excel to regenerate a report from the Report Editor How to use MS Excel to regenerate a report from the Report Editor Summary This article describes how to create COMPASS reports with Microsoft Excel. When completed, Excel worksheets and/or charts are available

More information

Microsoft Excel 2010 Tutorial

Microsoft Excel 2010 Tutorial 1 Microsoft Excel 2010 Tutorial Excel is a spreadsheet program in the Microsoft Office system. You can use Excel to create and format workbooks (a collection of spreadsheets) in order to analyze data and

More information

Email Account Create for Outlook Express

Email Account Create for Outlook Express Email Account Create for Outlook Express Click Start Menu Choose Outlook Express Click Tools menu from Menu Bar and then click Accounts In Internet Account Wizard, Click Add Button and Click Mail. 1 In

More information

Module SYSTEM INTRODUCTION & BASIC NAVIGATION. Astra Schedule Training Guide

Module SYSTEM INTRODUCTION & BASIC NAVIGATION. Astra Schedule Training Guide Module A SYSTEM INTRODUCTION & BASIC NAVIGATION Astra Schedule Training Guide Table of Contents Introduction... 1 Lesson Audience... 1 Lesson Objectives... 1 Configuration Requirements... 1 Common Practices...

More information

4 Manipulating Elements

4 Manipulating Elements 4 Manipulating Elements In the context of this course, Manipulation of elements means moving, copying, rotating, scaling and some other similar operations. We will find that manipulations are always a

More information

6. If you want to enter specific formats, click the Format Tab to auto format the information that is entered into the field.

6. If you want to enter specific formats, click the Format Tab to auto format the information that is entered into the field. Adobe Acrobat Professional X Part 3 - Creating Fillable Forms Preparing the Form Create the form in Word, including underlines, images and any other text you would like showing on the form. Convert the

More information

Choose a topic from the left to get help for CmapTools.

Choose a topic from the left to get help for CmapTools. Using CmapTools Create a Cmap Add a Concept Create a Proposition from One Concept Create a Proposition from Existing Concepts Save a Cmap Open a Cmap Create a Folder Drag in Resources Import Resources

More information

Importing Contacts to Outlook

Importing Contacts to Outlook Importing Contacts to Outlook 1. The first step is to create a file of your contacts from the National Chapter Database. 2. You create this file under Reporting, Multiple. You will follow steps 1 and 2

More information

Creating tables in Microsoft Access 2007

Creating tables in Microsoft Access 2007 Platform: Windows PC Ref no: USER 164 Date: 25 th October 2007 Version: 1 Authors: D.R.Sheward, C.L.Napier Creating tables in Microsoft Access 2007 The aim of this guide is to provide information on using

More information

Microsoft Access 2010 Part 1: Introduction to Access

Microsoft Access 2010 Part 1: Introduction to Access CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Microsoft Access 2010 Part 1: Introduction to Access Fall 2014, Version 1.2 Table of Contents Introduction...3 Starting Access...3

More information

Envisioneer Technical Note

Envisioneer Technical Note Title Blocks By default there are four pre-defined Worksheet view windows available (Floor Plan, Elevations, Details, and Site Plan). Each one contains a generic border and title block supplied by Cadsoft.

More information

Appendix A How to create a data-sharing lab

Appendix A How to create a data-sharing lab Appendix A How to create a data-sharing lab Creating a lab involves completing five major steps: creating lists, then graphs, then the page for lab instructions, then adding forms to the lab instructions,

More information

CDOT Linking Excel Documents to MicroStation

CDOT Linking Excel Documents to MicroStation CDOT Linking Excel Documents to MicroStation This document guides you through linking Excel spreadsheets to MicroStation. This workflow uses the example of linking a standard CDOT tab sheet but the concepts

More information

WSDOT ProjectWise V8i Training 101

WSDOT ProjectWise V8i Training 101 WSDOT PROJECTWISE V8I TRAINING 101 ABOUT THIS TRAINING This training is intended to give a user the ability to open ProjectWise and access working files. Once you become comfortable working within the

More information

Presents. AccuDraw. Instructor Pam Roberts pamroberts@cadassist.com www.cadassist.com

Presents. AccuDraw. Instructor Pam Roberts pamroberts@cadassist.com www.cadassist.com Presents AccuDraw Instructor Pam Roberts pamroberts@cadassist.com www.cadassist.com ACCUDRAW AccuDraw gives user an easy way to input accurate points. By default with MicroStation V8 AccuDraw will automatically

More information

Internet Explorer 7. Getting Started The Internet Explorer Window. Tabs NEW! Working with the Tab Row. Microsoft QUICK Source

Internet Explorer 7. Getting Started The Internet Explorer Window. Tabs NEW! Working with the Tab Row. Microsoft QUICK Source Microsoft QUICK Source Internet Explorer 7 Getting Started The Internet Explorer Window u v w x y { Using the Command Bar The Command Bar contains shortcut buttons for Internet Explorer tools. To expand

More information

Getting Started with Excel 2008. Table of Contents

Getting Started with Excel 2008. Table of Contents Table of Contents Elements of An Excel Document... 2 Resizing and Hiding Columns and Rows... 3 Using Panes to Create Spreadsheet Headers... 3 Using the AutoFill Command... 4 Using AutoFill for Sequences...

More information

DIRECTIONS FOR SETTING UP LABELS FOR MARCO S INSERT STOCK IN WORD PERFECT, MS WORD AND ACCESS

DIRECTIONS FOR SETTING UP LABELS FOR MARCO S INSERT STOCK IN WORD PERFECT, MS WORD AND ACCESS DIRECTIONS FOR SETTING UP LABELS FOR MARCO S INSERT STOCK IN WORD PERFECT, MS WORD AND ACCESS WORD PERFECT FORMAT MARCO ITEM #A-3LI - 2.25 H x 3W Inserts First create a new document. From the main page

More information

Generative Drafting. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes

Generative Drafting. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes Generative Drafting Page 1 Tutorial Objectives Description This Tutorial is an introduction to Generative Drafting. Message To show how CATIA V5 allows the user to automatically generate associative drafting

More information

PTC Integrity Eclipse and IBM Rational Development Platform Guide

PTC Integrity Eclipse and IBM Rational Development Platform Guide PTC Integrity Eclipse and IBM Rational Development Platform Guide The PTC Integrity integration with Eclipse Platform and the IBM Rational Software Development Platform series allows you to access Integrity

More information

Unified Monitoring Portal Online Help Topology

Unified Monitoring Portal Online Help Topology Unified Monitoring Portal Online Help Topology This PDF file contains content from the Unified Monitoring Portal (UMP) Online Help system. It is intended only to provide a printable version of the topics.

More information

Creating Drawings in Pro/ENGINEER

Creating Drawings in Pro/ENGINEER 6 Creating Drawings in Pro/ENGINEER This chapter shows you how to bring the cell phone models and the assembly you ve created into the Pro/ENGINEER Drawing mode to create a drawing. A mechanical drawing

More information

Utilizing Microsoft Access Forms and Reports

Utilizing Microsoft Access Forms and Reports Utilizing Microsoft Access Forms and Reports The 2014 SAIR Conference Workshop #3 October 4 th, 2014 Presented by: Nathan Pitts (Sr. Research Analyst The University of North Alabama) Molly Vaughn (Associate

More information

Appointment Scheduler

Appointment Scheduler EZClaim Appointment Scheduler User Guide Last Update: 11/19/2008 Copyright 2008 EZClaim This page intentionally left blank Contents Contents... iii Getting Started... 5 System Requirements... 5 Installing

More information

Creating Forms with Acrobat 10

Creating Forms with Acrobat 10 Creating Forms with Acrobat 10 Copyright 2013, Software Application Training, West Chester University. A member of the Pennsylvania State Systems of Higher Education. No portion of this document may be

More information

Hands-On Practice. Using Notebook Software in the Office

Hands-On Practice. Using Notebook Software in the Office Using Notebook Software in the Office Before You Start Before you begin your meeting, ensure that your computer is turned on and the SMART Board interactive whiteboard is connected and oriented. The SMART

More information

USING ADOBE PhotoShop TO MEASURE EarthKAM IMAGES

USING ADOBE PhotoShop TO MEASURE EarthKAM IMAGES USING ADOBE PhotoShop TO MEASURE EarthKAM IMAGES By James H. Nicholson and Ellen Vaughan Charleston County School District CAN DO Project for the EarthKAM Teacher Training Institute Introduction EarthKAM

More information

Writer Guide. Chapter 15 Using Forms in Writer

Writer Guide. Chapter 15 Using Forms in Writer Writer Guide Chapter 15 Using Forms in Writer Copyright This document is Copyright 2005 2008 by its contributors as listed in the section titled Authors. You may distribute it and/or modify it under the

More information

AARP Tax-Aide Helpful Hints for Using the Volunteer Excel Expense Form and Other Excel Documents

AARP Tax-Aide Helpful Hints for Using the Volunteer Excel Expense Form and Other Excel Documents AARP Tax-Aide Helpful Hints for Using the Volunteer Excel Expense Form and Other Excel Documents This document is designed to give you information to help you perform Excel file functions associated with

More information

Maximizing the Use of Slide Masters to Make Global Changes in PowerPoint

Maximizing the Use of Slide Masters to Make Global Changes in PowerPoint Maximizing the Use of Slide Masters to Make Global Changes in PowerPoint This document provides instructions for using slide masters in Microsoft PowerPoint. Slide masters allow you to make a change just

More information

Snap 9 Professional s Scanning Module

Snap 9 Professional s Scanning Module Miami s Quick Start Guide for Using Snap 9 Professional s Scanning Module to Create a Scannable Paper Survey Miami s Survey Solutions Snap 9 Professional Scanning Module Overview The Snap Scanning Module

More information

Dreamweaver and Fireworks MX Integration Brian Hogan

Dreamweaver and Fireworks MX Integration Brian Hogan Dreamweaver and Fireworks MX Integration Brian Hogan This tutorial will take you through the necessary steps to create a template-based web site using Macromedia Dreamweaver and Macromedia Fireworks. The

More information

Data Visualization. Prepared by Francisco Olivera, Ph.D., Srikanth Koka Department of Civil Engineering Texas A&M University February 2004

Data Visualization. Prepared by Francisco Olivera, Ph.D., Srikanth Koka Department of Civil Engineering Texas A&M University February 2004 Data Visualization Prepared by Francisco Olivera, Ph.D., Srikanth Koka Department of Civil Engineering Texas A&M University February 2004 Contents Brief Overview of ArcMap Goals of the Exercise Computer

More information

Microsoft PowerPoint 2008

Microsoft PowerPoint 2008 Microsoft PowerPoint 2008 Starting PowerPoint... 2 Creating Slides in Your Presentation... 3 Beginning with the Title Slide... 3 Inserting a New Slide... 3 Slide Layouts... 3 Adding an Image to a Slide...

More information

2. Building Cross-Tabs in Your Reports Create a Cross-Tab Create a Specified Group Order Filter Cross-Tab by Group Keep Groups Together

2. Building Cross-Tabs in Your Reports Create a Cross-Tab Create a Specified Group Order Filter Cross-Tab by Group Keep Groups Together Crystal Reports Level 2 Computer Training Solutions Course Outline 1. Creating Running Totals Create a Running Total Field Modify a Running Total Field Create a Manual Running Total on Either Detail Data

More information

Sweet Home 3D user's guide

Sweet Home 3D user's guide 1 de 14 08/01/2013 13:08 Features Download Online Gallery Blog Documentation FAQ User's guide Video tutorial Developer's guides History Reviews Support 3D models Textures Translations Forum Report a bug

More information

Basic Microsoft Excel 2007

Basic Microsoft Excel 2007 Basic Microsoft Excel 2007 The biggest difference between Excel 2007 and its predecessors is the new layout. All of the old functions are still there (with some new additions), but they are now located

More information

Excel -- Creating Charts

Excel -- Creating Charts Excel -- Creating Charts The saying goes, A picture is worth a thousand words, and so true. Professional looking charts give visual enhancement to your statistics, fiscal reports or presentation. Excel

More information

Eclipse installation, configuration and operation

Eclipse installation, configuration and operation Eclipse installation, configuration and operation This document aims to walk through the procedures to setup eclipse on different platforms for java programming and to load in the course libraries for

More information

Adobe Dreamweaver CC 14 Tutorial

Adobe Dreamweaver CC 14 Tutorial Adobe Dreamweaver CC 14 Tutorial GETTING STARTED This tutorial focuses on the basic steps involved in creating an attractive, functional website. In using this tutorial you will learn to design a site

More information

Creating Fill-able Forms using Acrobat 8.0: Part 1

Creating Fill-able Forms using Acrobat 8.0: Part 1 Creating Fill-able Forms using Acrobat 8.0: Part 1 The first step in creating a fill-able form in Adobe Acrobat is to generate the form with all its formatting in a program such as Microsoft Word. Then

More information

FDOT Plans Production Tools

FDOT Plans Production Tools FDOT State Kit for AutoCAD Civil 3D Mike Racca CADD APPLICATIONS SUPPORT Florida Department of Transportation (ECSO) Email: Mike.Racca@dot.state.fl.us Phone: 850-245-1631 GENERAL Civil 3D Plan Production

More information

KaleidaGraph Quick Start Guide

KaleidaGraph Quick Start Guide KaleidaGraph Quick Start Guide This document is a hands-on guide that walks you through the use of KaleidaGraph. You will probably want to print this guide and then start your exploration of the product.

More information

CATIA Basic Concepts TABLE OF CONTENTS

CATIA Basic Concepts TABLE OF CONTENTS TABLE OF CONTENTS Introduction...1 Manual Format...2 Log on/off procedures for Windows...3 To log on...3 To logoff...7 Assembly Design Screen...8 Part Design Screen...9 Pull-down Menus...10 Start...10

More information

Communicate: In Print

Communicate: In Print Communicate: In Print A simple guide Work areas Communicate: In Print has two different modes in which to edit your documents: Create and Adjust modes. These are easily interchangeable and the toolbars

More information

SMART Board Training Outline Trainer: Basel Badran

SMART Board Training Outline Trainer: Basel Badran Sharjah Higher Colleges of Technology SMART Board Training Outline Trainer: Basel Badran What is a SMART Board? o Concept & Technology SMART Board Components: o Smart Tools Start Center Recorder Keyboard

More information

ProjectWise Explorer V8i User Manual for Subconsultants & Team Members

ProjectWise Explorer V8i User Manual for Subconsultants & Team Members ProjectWise Explorer V8i User Manual for Subconsultants & Team Members submitted to Michael Baker International Subconsultants & Team Members submitted by Michael Baker International ProjectWise Support

More information

TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE...

TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... 7 ADVANCE CONCRETE USER INTERFACE... 7 Other important

More information

How To Send An Encrypted Email In Outlook 2000 (For A Password Protected Email) On A Pc Or Macintosh (For An Ipo) On Pc Or Ipo (For Pc Or For A Password Safemail) On An Iphone Or

How To Send An Encrypted Email In Outlook 2000 (For A Password Protected Email) On A Pc Or Macintosh (For An Ipo) On Pc Or Ipo (For Pc Or For A Password Safemail) On An Iphone Or Outlook 2000 1. Open Outlook 2000 and select the Tools > Options > Security. 2. Click Change Settings. 3. Under the Certificates and Algorithms, there are two Choose buttons. The first allows you to select

More information

Microsoft Excel 2013: Charts June 2014

Microsoft Excel 2013: Charts June 2014 Microsoft Excel 2013: Charts June 2014 Description We will focus on Excel features for graphs and charts. We will discuss multiple axes, formatting data, choosing chart type, adding notes and images, and

More information

Roadway Plan Production

Roadway Plan Production AutoCAD Civil 3D 2010 Education Curriculum Instructor Guide Unit 5: Transportation Design Lesson 5 Roadway Plan Production Overview This lesson describes how to automate the generation of plan and profile

More information

Instructions for Creating a Poster for Arts and Humanities Research Day Using PowerPoint

Instructions for Creating a Poster for Arts and Humanities Research Day Using PowerPoint Instructions for Creating a Poster for Arts and Humanities Research Day Using PowerPoint While it is, of course, possible to create a Research Day poster using a graphics editing programme such as Adobe

More information

Add an E-Commerce Catalog to your Website

Add an E-Commerce Catalog to your Website Page 1 of 20 Add an E-Commerce Catalog to your Website Creating an E-Commerce Catalog In this tutorial, you build an e-commerce catalog that includes products which will assist hikers on expeditions. Using

More information

Scatter Plots with Error Bars

Scatter Plots with Error Bars Chapter 165 Scatter Plots with Error Bars Introduction The procedure extends the capability of the basic scatter plot by allowing you to plot the variability in Y and X corresponding to each point. Each

More information

User Guide. DYMO Label TM v.8

User Guide. DYMO Label TM v.8 User Guide DYMO Label TM v.8 Copyright 2009 Sanford, L.P. All rights reserved. Revised 6/12/09. No part of this document or the software may be reproduced or transmitted in any form or by any means or

More information

Scan2CRM for ACT! User Guide

Scan2CRM for ACT! User Guide Scan2CRM for ACT! User Guide APPENDIX Warranty... I Notice to user...ii Publication...III Trademarks...IV Version 9.50 - Supports ACT! by Sage for windows, ACT! 2007 (Version 9) and above. This publication

More information

Layout Tutorial. Getting Started

Layout Tutorial. Getting Started Getting Started Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating

More information

Getting Started with WebEx Access Anywhere

Getting Started with WebEx Access Anywhere Getting Started with WebEx Access Anywhere This guide provides basic instructions to help you start using WebEx Access Anywhere quickly. This guide assumes that you have a user account on your meeting

More information

ECDL. European Computer Driving Licence. Database Software BCS ITQ Level 1. Syllabus Version 1.0

ECDL. European Computer Driving Licence. Database Software BCS ITQ Level 1. Syllabus Version 1.0 ECDL European Computer Driving Licence Database Software BCS ITQ Level 1 Using Microsoft Access 2013 Syllabus Version 1.0 This training, which has been approved by BCS, includes exercise items intended

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When we are finished, we will have created

More information

MICROSOFT ACCESS 2007 BOOK 2

MICROSOFT ACCESS 2007 BOOK 2 MICROSOFT ACCESS 2007 BOOK 2 4.1 INTRODUCTION TO ACCESS FIRST ENCOUNTER WITH ACCESS 2007 P 205 Access is activated by means of Start, Programs, Microsoft Access or clicking on the icon. The window opened

More information

Making Visio Diagrams Come Alive with Data

Making Visio Diagrams Come Alive with Data Making Visio Diagrams Come Alive with Data An Information Commons Workshop Making Visio Diagrams Come Alive with Data Page Workshop Why Add Data to A Diagram? Here are comparisons of a flow chart with

More information

How To Write A Cq5 Authoring Manual On An Ubuntu Cq 5.2.2 (Windows) (Windows 5) (Mac) (Apple) (Amd) (Powerbook) (Html) (Web) (Font

How To Write A Cq5 Authoring Manual On An Ubuntu Cq 5.2.2 (Windows) (Windows 5) (Mac) (Apple) (Amd) (Powerbook) (Html) (Web) (Font Adobe CQ5 Authoring Basics Print Manual SFU s Content Management System SFU IT Services CMS Team ABSTRACT A summary of CQ5 Authoring Basics including: Setup and Login, CQ Interface Tour, Versioning, Uploading

More information

Petrel TIPS&TRICKS from SCM

Petrel TIPS&TRICKS from SCM Petrel TIPS&TRICKS from SCM Maps: Knowledge Worth Sharing Map Annotation A map is a graphic representation of some part of the earth. In our industry, it may represent either the surface or sub surface;

More information

Data Visualization. Brief Overview of ArcMap

Data Visualization. Brief Overview of ArcMap Data Visualization Prepared by Francisco Olivera, Ph.D., P.E., Srikanth Koka and Lauren Walker Department of Civil Engineering September 13, 2006 Contents: Brief Overview of ArcMap Goals of the Exercise

More information

How To Create A Powerpoint Intelligence Report In A Pivot Table In A Powerpoints.Com

How To Create A Powerpoint Intelligence Report In A Pivot Table In A Powerpoints.Com Sage 500 ERP Intelligence Reporting Getting Started Guide 27.11.2012 Table of Contents 1.0 Getting started 3 2.0 Managing your reports 10 3.0 Defining report properties 18 4.0 Creating a simple PivotTable

More information

In this example, Mrs. Smith is looking to create graphs that represent the ethnic diversity of the 24 students in her 4 th grade class.

In this example, Mrs. Smith is looking to create graphs that represent the ethnic diversity of the 24 students in her 4 th grade class. Creating a Pie Graph Step-by-step directions In this example, Mrs. Smith is looking to create graphs that represent the ethnic diversity of the 24 students in her 4 th grade class. 1. Enter Data A. Open

More information

Creating Interactive PDF Forms

Creating Interactive PDF Forms Creating Interactive PDF Forms Using Adobe Acrobat X Pro Information Technology Services Outreach and Distance Learning Technologies Copyright 2012 KSU Department of Information Technology Services This

More information

Creating PDF Forms in Adobe Acrobat

Creating PDF Forms in Adobe Acrobat Creating PDF Forms in Adobe Acrobat Flinders University Centre for Educational ICT Contents What are PDF forms?... 1 Viewing a PDF form... 1 Types of PDF forms... 1 Printing and saving PDF forms... 1 Forms

More information

FastTrack Schedule 10. Tutorials Manual. Copyright 2010, AEC Software, Inc. All rights reserved.

FastTrack Schedule 10. Tutorials Manual. Copyright 2010, AEC Software, Inc. All rights reserved. FastTrack Schedule 10 Tutorials Manual FastTrack Schedule Documentation Version 10.0.0 by Carol S. Williamson AEC Software, Inc. With FastTrack Schedule 10, the new version of the award-winning project

More information

Tutorial JavaScript: Switching panels using a radio button

Tutorial JavaScript: Switching panels using a radio button Tutorial JavaScript: Switching panels using a radio button www.nintex.com support@nintex.com Contents About this tutorial... 3 Upload the JavaScript File... 4 Using JavaScript to hide or show a control

More information

CREATING A 3D VISUALISATION OF YOUR PLANS IN PLANSXPRESS AND CORTONA VRML CLIENT

CREATING A 3D VISUALISATION OF YOUR PLANS IN PLANSXPRESS AND CORTONA VRML CLIENT CREATING A 3D VISUALISATION OF YOUR PLANS IN PLANSXPRESS AND CORTONA VRML CLIENT 20-25 Minutes This topic is for users of PlansXpress Total Toolkit Edition. To upgrade to PlansXpress Total Toolkit, call

More information

Excel Unit 4. Data files needed to complete these exercises will be found on the S: drive>410>student>computer Technology>Excel>Unit 4

Excel Unit 4. Data files needed to complete these exercises will be found on the S: drive>410>student>computer Technology>Excel>Unit 4 Excel Unit 4 Data files needed to complete these exercises will be found on the S: drive>410>student>computer Technology>Excel>Unit 4 Step by Step 4.1 Creating and Positioning Charts GET READY. Before

More information

Chapter 15 Using Forms in Writer

Chapter 15 Using Forms in Writer Writer Guide Chapter 15 Using Forms in Writer OpenOffice.org Copyright This document is Copyright 2005 2006 by its contributors as listed in the section titled Authors. You can distribute it and/or modify

More information

Digital Signature Certification Workflow

Digital Signature Certification Workflow Digital Signature Certification Workflow This document goes through a workflow of how to create a set of plans that contain an Adobe CDS digital signature using Adobe Acrobat X Pro. There are several variances

More information

WebFOCUS BI Portal: S.I.M.P.L.E. as can be

WebFOCUS BI Portal: S.I.M.P.L.E. as can be WebFOCUS BI Portal: S.I.M.P.L.E. as can be Author: Matthew Lerner Company: Information Builders Presentation Abstract: This hands-on session will introduce attendees to the new WebFOCUS BI Portal. We will

More information

Introduction to Autodesk Inventor for F1 in Schools

Introduction to Autodesk Inventor for F1 in Schools Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy

More information

AUSTRALIAN CUSTOMS AND BORDER PROTECTION SERVICE TYPE 3 CERTIFICATE 2014 INSTALLATION GUIDE

AUSTRALIAN CUSTOMS AND BORDER PROTECTION SERVICE TYPE 3 CERTIFICATE 2014 INSTALLATION GUIDE AUSTRALIAN CUSTOMS AND BORDER PROTECTION SERVICE TYPE 3 CERTIFICATE 2014 INSTALLATION GUIDE The Type 3 digital certificate used by the Australian Customs and Border Protection Service (AC&BPS) is due for

More information

Microsoft Access 2010- Introduction

Microsoft Access 2010- Introduction Microsoft Access 2010- Introduction Access is the database management system in Microsoft Office. A database is an organized collection of facts about a particular subject. Examples of databases are an

More information

How to build Dashboard - Step by Step tutorial/recipe

How to build Dashboard - Step by Step tutorial/recipe How to build Dashboard - Step by Step tutorial/recipe Contents How to build Dashboard - Step by Step tutorial/recipe...1 How to create Excel Dashboard [ as direct connection ]...2 Purpose of this Dashboard

More information

Welcome to Bridgit @ CSU The Software Used To Data Conference.

Welcome to Bridgit @ CSU The Software Used To Data Conference. Welcome to Bridgit @ CSU The Software Used To Data Conference. Overview SMART Bridgit software is a client/server application that lets you share programs and information with anyone, anywhere in the world.

More information