Research and Teaching Assistant March 2011 August Visiting Scholar January 2010 October 2010 Texas A&M University, College Station, USA

Transcription

1 CURRICULUM VITAE Assoc.Prof.Dr. MEHMET SORGUN Izmir Katip Celebi University 35620, Cigli,Izmir, Turkey Phone:+90 (232) EDUCATION 2010 Ph.D. Petroleum Engineering (3.79/4.00), Middle East Technical University (METU), Ankara, Turkey M.S. Civil Engineering (92.75/100), Celal Bayar University, Manisa, Turkey B.S. Civil Engineering (75.97/100), Dokuz Eylul University, Izmir, Turkey. ACADEMIC POSITIONS Associate Professor Izmir Katip Celebi University, Izmir, Turkey Assistant Professor Izmir Katip Celebi University, Izmir, Turkey Assistant Professor Ataturk University, Erzurum, Turkey October 2014 August 2012 October 2014 August 2011 August 2012 Research and Teaching Assistant March 2011 August 2011 Ataturk University, Erzurum, Turkey Visiting Scholar January 2010 October 2010 Texas A&M University, College Station, USA Research and Teaching Assistant January 2004 March 2011 Department of Petroleum Engineering Middle East Technical University, Ankara, Turkey HONORS AND AWARDS Associate Professor degree from Higher Education Council of Turkey (YOK), Civil Engineering, October Honor Award, Izmir Katip Celebi University, Best PhD thesis award at METU, Distinguished Ph.D. Student Award, METU, Last update on March 03, 2016 Page 1

2 RESEARCH INTEREST Computational Fluid Dynamics Experimental Fluid Mechanics Multiphase Flow Cuttings Transport Modeling of Newtonian and non-newtonian Fluids Turbulence Models Fluid Rheological Characterization Well Hydraulics RESEARCH GRANTS BAP- Izmir Katip Celebi University, Determination of Heat Transfer Characteristics of Water and non- Newtonian Fluids in Annulus using ANN, Experimental and Theoretical Work, STATOIL ASA Middle East Technical University, "Hole Cleaning Performance of Water and Oil Based Muds", Experimental and Theoretical Work, 2006, No: (Project Assistant). TUBITAK - MAG 108M106 Determination of Cuttings Transport Properties of Gasified Drilling Fluids (Project Assistant). GRADUATE RESEARCH SUPERVISION Haşıroglu D.G., Analysis of Pipe Roughness Effects on Flow Characteristics of Newtonian Fluids in Concentric Annulus Using Finite Element Method (Turkish), MS Thesis, Ataturk University, Graduate School of Natural and Applied Sciences, Civil Engineering, Ulker E., Determination of Thermal and Flow Behaviours of Newtonian Fluids in Deep Wells, İzmir Katip Celebi University, Graduate School of Natural and Applied Sciences, Civil Engineering, Muftuoglu T.D, A Fuzzy Model To Estimate Cuttings Bed Thickness in Horizontal and Inclined Wellbores, İzmir Katip Celebi University, Graduate School of Natural and Applied Sciences, Civil Engineering, Last update on March 03, 2016 Page 2

3 CONTRIBUTION TO UNIVERSITY S ACADEMIC MANAGEMENT Members of Izmir Katip Celebi University Senate, November Associate Director- Graduate School of Natural and Applied Sciences, June Vice-Chairperson, Civil Engineering Department, JOURNAL PUBLICATIONS (SCI and SCI- Expanded) (number of citations Google Scholar: 157, h index:8) Sorgun M., Erman E.., Modeling and Experimental Study of Solid Liquid Two-Phase Pressure Drop in Horizontal Wellbores With Pipe Rotation, J. Energy Resour. Technol., 138(2): , Sorgun M., Ozbayoglu M.A., Ozbayoglu M.E., Support Vector Regression (SVR) and Computational Fluid Dynamics Modeling of Newtonian and non-newtonian Fluids in Annulus with Pipe Rotation, Journal of Energy Resource Technology, 137(3), (6 pages), Sorgun M., (2013), Simple Correlations and Analysis of Cuttings Transport With Newtonian and Non- Newtonian Fluidsin Horizontal and Deviated Wells, Journal of Energy Resource Technology, 135:3, (6 pages). Sorgun M., Osgouei R.E., Ozbayoglu M.E., Ozbayoglu M.A., Experimental and Numerical Study of Two- Phase Flow in Horizontal Eccentric Annuli, Energy Source Part A: Recovery, Utilization, and Environmental Effects, 35:10, , 2013.( DOI / ). Sorgun M., Helical Flow of Non-Newtonian Fluids in Concentric and Fully Eccentric Annulus,Energy Source Part A: Recovery, Utilization, and Environmental Effects, 34:5, , (DOI: / ) Sorgun M., Computational Fluid Dynamics Modeling of Pipe Eccentricity Effect on Flow Characteristics of Laminar Flow of Newtonian and Non-Newtonian Fluids, Energy Source Part A: Recovery, Utilization, and Environmental Effects, 33:12, , (DOI: / ) Sorgun M., Aydin I., Ozbayoglu M.E., Schubert J.J., Mathematical Modeling of Turbulent Flows of Newtonian Fluids in Concentric Annulus with Pipe Rotation, Energy Source Part A: Recovery, Utilization, and Environmental Effects, 34:6, , (DOI: / ) Sorgun M., Aydin I., Ozbayoglu M.E., Friction Factors for hydraulic calculations considering presence of cuttings and pipe rotation in horizontal /highly-inclined wellbores, Journal of Petroleum Science and Engineering, 78(2011), (DOI: /j.petrol ) Sorgun M., Ozbayoglu M.E., Aydin I., Modeling and Experimental Study of Newtonian Fluid Flow in Annulus, Journal of Energy Resource Technology, 132:3, (6 pages), (DOI: / ) Sorgun M., Ozbayoglu M.E., Predicting Frictional Pressure Loss During Horizontal Drilling for Non- Newtonian Fluids, Energy Sources Part A: Recovery, Utilization, and Environmental Effects, 33:7, , (DOI: / ) Last update on March 03, 2016 Page 3

4 Sorgun M., Ozbayoglu M.E., A Mechanistic Model for Predicting Frictional Pressure Losses for Newtonian Fluids in Concentric Annulus, Petroleum Science and Technology, 28: 16, , (DOI: / ) Ozbayoglu M.E, Sorgun M., Frictional Pressure Loss Estimation of Non-Newtonian Fluids in Realistic Annulus with Pipe Rotation, Journal of Canadian Petroleum Technology, 49(12): 57-64, SPE PA, (DOI: / PA) Ozbayoglu M.E., Saasen A., Sorgun M., Svanes K., Critical Fluid Velocities for Removing Cuttings Bed Inside Horizontal and Deviated Wells, Petroleum Science and Technology, 28: 6, , (DOI: / ) Osgouei R.E., Sorgun M., A Critical Evaluation of Iranian Natural Gas Resources, Energy Sources, Part B: Economics, Planning, and Policy, 7:2, , (DOI: / ) Acar, C., Sorgun M., Geothermal Energy: Current Status in Turkey With EU Perspective, Energy Sources, Part B: Economics, Planning, and Policy, 4: , (DOI: / ) Ozbayoglu M.E., Sorgun M., Saasen A., Svanes K., Hole Cleaning Performance of Light-Weight Drilling Fluids During Horizontal Underbalanced Drilling, Journal of Canadian Petroleum Technology, 49, No.4, 21-26, 2010 (DOI: / PA) Sorgun M., Modelling of Liquid-Solid Flow in Horizontal and Deviated Wells, Powder Technology (under review). Sorgun M., Muftuoglu T., Ulker M., Fuzzy Logic Modeling of Liquid-Solid Two Phase Flow in Horizontal and Inclined Wellbores, International Journal of Oil Gas and Coal Technology (ijogct) (under review). Ulker M, Sorgun M., Comparison of Computational Intelligence Models For Cuttings Transport in Horizontal and Deviated Wells, Journal of Petroleum Science and Engineering (under review). INTERNATIONAL CONFERENCE PAPERS Ulker M., Sorgun M., Solmus I., Karadeniz Z.H., Pressure Losses Calculations Considering Temperature and Pipe Rotation in Annulus, International Congress on Advances in Civil Engineering (ACE 2016) (accepted). Muftuoğlu T.D.,Ulker E., Sorgun M., A Fuzzy Model To Estimate Cuttings Bed Thickness in Horizontal and Inclined Wellbores, Applied and Computational Mechanics, 5-7 August 2015, Izmir. Ulker E., Sorgun M, Predicting Pressure Loss for Liquid-Solid Flow in Annulus Using CFD, Applied and Computational Mechanics, 5-7 August 2015, Izmir. Sorgun M., Ozbayoglu A.M., Ozbayoglu M.E., Estimation of Frictional Pressure Losses in Annulus with Pipe Rotation Using Support Vector Machines and Computational Fluid Dynamics 10 th International Congress on Advances in Civil Engineering (ACE 2012), Metu, Ankara, October Last update on March 03, 2016 Page 4

5 Sorgun M., Osgouei R.E., Ozbayoglu M.E., Ozbayoglu M.A., Gas-Liquid Flow through Horizontal Eccentric Annuli: CFD and Experiments compared, ASME-ISME-KSME Joint Fluids Engineering Conference, Hamamatsu, Japan, July Sorgun M., Schubert J.J., Aydin I., Ozbayoglu M.E., Modeling of Newtonian Fluids in Annular Geometries with Pipe Rotation, ASME RD Joint US-European Fluids Engineering Meeting, Montreal, Canada, 1-5 August, Ozbayoglu M.E, Sorgun M., Frictional Pressure Loss Estimation of Water-Based Drilling Fluids at Horizontal and Inclined Drilling with Pipe Rotation and Presence of Cuttings, SPE , Oil& Gas India Conference and Exhibition (OGIC) Mumbai, India, January Ozbayoglu M.E, Sorgun M., Frictional Pressure Loss Estimation of Non-Newtonian Fluids in Realistic Annulus with Pipe Rotation, Canadian International Petroleum Conference (CIPC) (60th Annual Technical Meeting), Calgary, Alberta, Canada, June, Ozbayoglu M.E., Saasen A., Sorgun M., Svanes K., " Effect of Pipe Rotation on Hole Cleaning for Water- Based Drilling Fluids in Horizontal and Deviated Wells", IADC/SPE , IADC/SPE Asia Pacific Drilling Technology Conference & Exhibition, Jakarta,Indonisia, August Ozbayoglu M.E., Saasen A., Sorgun M., Svanes K.,"Hole Cleaning Performance of Light-Weight Drilling Fluids During Horizontal Underbalanced Drilling", 8th Canadian International Petroleum Conference (58th Annual Technical Meeting), Calgary, Alberta, Canada, June, Ozbayoglu M.E., Saasen A., Sorgun M., Svanes K., Estimating Critical Velocity to Prevent Bed Development for Horizontal-Inclined Wellbores, SPE/IADC , SPE/IADC Middle East Drilling Technology Conference & Exhibition, Cairo, Egypt, October, NATIONAL CONFERENCE PAPERS Ulker E., Sorgun M, Yatay Kuyulardaki Sıvı-Katı Çift Fazlı Akışın Modellenmesi, XIX. Ulusal Mekanik Kongresi Ağustos 2015, Trabzon. Sorgun M., Aydin I., Ozbayoglu M.E., Schubert J.J., İçteki Dönen Eşmerkezli Borular Arasındaki Newtonian Akımın Modellenmesi, İnşaat Mühendisliği nde 100. Yıl Teknik Kongresi, Kasım 2012,Yıldız Teknik Üniversitesi, İstanbul. Sorgun M., Modeling of Cuttings Transport in Horizontal Wellbores Using Computational Fluid Dynamics, Ipetgas 2009, 17 th International Petroleum And Natural Gas Congress and Exhibition Of Turkey, May, 2011, Ankara. Sorgun M., Ozbayoglu M.E, Experimental and Numerical Study of Predicting Frictional Pressure Losses in Concentric Annulus, Ipetgas 2009, 17th International Petroleum And Natural Gas Congress and Exhibition Of Turkey, May, 2009, Ankara. Last update on March 03, 2016 Page 5

6 Ozbayoglu M.E., Saasen A., Sorgun M., Svanes K., "Yüksek Açılı Kuyularda Kesinti Yatağı Oluşumunu Engellemek için Gereken Kritik Akışkan Hızının Tahmini", 16. Petrol ve Doğal Gaz Kongresi, Mayıs 29-31, 2007, Ankara. COURSES TAUGHT CE 101 Introduction to Civil Engineering CE 250 Fluid Mechanics CE 351 Hydraulics CE 380 Hydrology and Water Resources Engineering CE 451 Dimensional Analysis and Modeling CE 551 Advanced Fluid Mechanics JOURNAL REVIEWER Engineering Applications of Computational Fluid Dynamics (SCI) Progress in Computational Fluid Dynamics, An International Journal (SCI) International Journal of Heat and Mass Transfer (SCI) Journal of Energy Resource Technology (ASME) (SCI) International Journal of Thermal Science (SCI) SPE Drilling&Completion (SCI) Energy Source Part A (SCI) Chemical Engineering Communications (SCI) International Journal of Oil, Gas and Coal Technology (SCI) Heat Transfer-Asian Research (SCI) Canadian Geothenical Journal (SCI) CONFERENCE ORGANIZATION Vice Chair The Second International Conference on Water, Energy, and the Environment, Kusadası, September, 21-24, PhD THESIS DEFENSE COMMITTEE MEMBER Gharehbaghi A., 2D Modelling of Sediment Transport in Unsteady Flows, Civil Engineering Department, Dokuz Eylul University, Izmir, Last update on March 03, 2016 Page 6

7 MASTER of SCIENCE THESIS DEFENSE COMMITTEE MEMBER Ergin I., Dynamic Analysis of Lattice Type Offshore Structures, Civil Engineering Department, Celal Bayar University, Manisa, Suk R., Structural Cost Comparission Of Steel Stadium Roof, Civil Engineering Department, Celal Bayar University, Manisa, CITATIONS [as of March 03, 2016] Last update on March 03, 2016 Page 7