4 M.S & G.I Pipes as per IS JINDAL/TATA ½ to 6 C.S seamless Non IBR & IBR Pipes sch 40 & sch 80 MSL/JSW/Imported ½ to 20

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "4 M.S & G.I Pipes as per IS JINDAL/TATA ½ to 6 C.S seamless Non IBR & IBR Pipes sch 40 & sch 80 MSL/JSW/Imported ½ to 20"

Transcription

1 Index Page 1 of 3 Page No Description Make Size range 4 M.S & G.I Pipes as per IS JINDAL/TATA ½ to 6 C.S seamless Non IBR & IBR Pipes sch 40 & sch 80 MSL/JSW/Imported ½ to 20 5 M.S & G.I ERW Pipes s per IS 3589 BEST INDIAN MAKE 8 to 20 6 M.S Square Tubes BEST INDIAN MAKE 25mm to 150 mm 7 M.S Rectangular Tubes BEST INDIAN MAKE 50x 25 to 200 x 100 mm 8 S.S 304 Pipes as per Sch 10 & sch 40 Imported ½ to 12 N.B S.S 304 Flanges & Fittings Imported ½ to 8 N.B 9 S.S 316 Pipes as per Sch 10 & sch 40 Imported ½ to 12 N.B S.S 316 Flanges & Fittings Imported ½ to 8 N.B 10 IC fittings Screwed end SS 304 Imported / BEST INDIAN MAKE S.S 304 Buttweld Reducers ERW Sch 10 Imported / BEST INDIAN MAKE ¼ to 2 ¾ to M.S Slipon Flanges as per BS, ASA & IS stds TMI / Eq ½ to 5 12 M.S Slipon Flanges as per BS, ASA & IS stds TMI / Eq 6 to M.S Dummy(Blind) Flanges as per BS, ASA & IS stds TMI / Eq ½ to 5 14 M.S Dummy(Blind) Flanges as per BS, ASA & IS stds TMI / Eq 6 to M.S & G.I Screwed Flanges BEST INDIAN MAKE ½ to 8 16 M.S & G.I Buttweld Long Bends in ERW B, ERW C, Seamless Sch 40, ISS, U/Return Bends. Omega Expansion Bends 17 M.S & G.I Buttweld Elbows in ERW B, ERW C, Seamless Sch 40, Sch 80, 90 degree, 45 degree,,g.i electroplating & Hot dip galvanized. BEST INDIAN MAKE ½ to 16 BEST INDIAN MAKE ½ to M.S Reducers ERW in Concentric & Eccentric BEST INDIAN MAKE ¾ to M.S Reducers Seamless Sch 40 & Sch 80 in Concentric & Eccentric BEST INDIAN MAKE ¾ to M.S Tee in ERW & Seamless Equal & Reducing BIM/ Imported ½ to 24 e-store pricelist dated (Please call us for current best discounts) Page No 1

2 Index Page 2 of 3 TUBES & VALVES MANUFACTURING COMPANY S.No Description Make Size range C.S Buttweld Cap Seamless Sch 40 & Sch 80 BEST INDIAN MAKE 1 to 24 F.C.S A 105 Flanges as per ANSI SORF, SWRF, WNRF BEST INDIAN MAKE ½ to 20 M.S Forged Fittings S/E to BSP 1000 lbs Equal and Reducings VS / BEST INDIAN MAKE ¼ to 3 M.S Forged Fittings Socketweld Ends 3000 lbs Equal and Reducings VS / BEST INDIAN MAKE ½ to 2 Forged Fittings S/E 3000 lbs to NPT BEST INDIAN MAKE ½ to 3 CAST Steel Fittings S/E to BSP BEST INDIAN MAKE ½ to 4 CAST Steel Bush BEST INDIAN MAKE 1 ½ to 6 M.S Pipe Nipple In ERW B, ERW C, Seamless Sch 40 BEST INDIAN MAKE ¼ to 6 M.S Cal Steel Fittings S/E to BSP BEST INDIAN MAKE 1 ½ to 4 G.I Pipe Nipple ERW B & ERW A BEST INDIAN MAKE ½ to 4 G.I U Clamps 8 mm, 10 mm & 12 mm thk BEST INDIAN MAKE ½ to 12 G.I ISI Fittings S/E to BSP Equal & Reducing BEST INDIAN MAKE ½ to 6 G.I R Brand Fittings S/E to BSP Equal & Reducing R Brand ½ to 6 C.S Flanges & Fittings with I.B.R JR / Eq ½ to 12 F.C.S S/E Fittings with I.B.R JR / Eq ½ to 2 F.C.S S/W Fittings with I.B.R JR / Eq ½ to 2 29 C.S Reducer Sch 40 Conc & Eccn with I.B.R JR / Eq ¾ to 8 Ball Valves S/E to BSP in C.I, C.S, G.M, F.C.S in Single Pcs design & 3 Pcs design BAJPAI/FLOWJET/IMPORTED ¼ to G.M Gate Valve S/E ISI R BRAND ¼ to 6 Ball Valves F/E to Class 150 in C.I, C.S, G.M, F.C.S in Single Pcs design & 3 Pcs design FLOWJET ½ to 10 C.I Butterfly Valves BAJPAI /FLOWJET/AUDCO 1 to 14 CAST Steel Valves ( Gate / Globe / Check / Y Strainer ) in class 150 & class 300 ratings CREST/FLOWJET 1 to 12 e-store pricelist dated (Please call us for current best discounts) Page No 2

3 Index page 3 of 3 S.No Description Make Size range C.I Sluice Valves ISI & Non ISI DIVINE 1 to 12 C.I NRV ( Refleux ) Valve DIVINE 1 ½ to 12 C.I Y Strainer F/E CREST / VALSON ½ to 12 C.I T Pot Strainer F/E VALSON 1 ½ to 12 C.I Foot Valve Swing Type & Lift Type DIVINE/ V V 2 to 12 S.S Needle Valve Barstock ( 202 / 304 / 316 ) BAJPAI/ FLOWJET ¼ TO 2 CAST IRON DIAPHRAGM VALVE ( Unlined / Rubber Lined / Ebonite Lined & Spare Diaphragm) BSCO ¾ to 6 G.M Valves Steam Line ATAM ½ to 2 C.I Gland Cock / Taper Plug Valve DIVINE ½ to 6 FLOWJET Side Flow Indicator FLOWJET 1 to 4 FCS Non IBR ( Gate / Globe / Check ) Valves & I.B.R FLOWJET ½ to 2 SS 420 Steam Trap Thermodynamic FLOWJET ½ to 1 M.S Wafer Check Valve, C.I Dual plate check valve FLOWJET 1 ½ to 12 S.S Non Slam Check Valve FLOWJET ½ to 4 C.I Y Strainer S/E & F/E FLOWJET / VALSON ½ to 12 C.I Pulp Valve / Knife Edge Gate Valves BAJPAI/V V 2 to 16 Water Meter KRANTI / KUSHAL ½ to CAST Steel Valves I.B.R ( Gate / Globe / Check / Y strainer) FLOWJET 1 to 12 Bronze Valves I.B.R ATAM ½ to Cast Iron Valves I.B.R ATAM ½ to 12 Cast Steel Valves I.B.R ATAM ½ to 2 ½ e-store pricelist dated (Please call us for current best discounts) Page No 3

4 PIPES M.S B Class M.S C Class G.I B Class G.I C Class C.S NON IBR C.S IBR Jindal Tata Jindal Tata Jindal Tata Jindal Tata Sch.40 Sch.80 Sch.40 Sch.80 ½ ¾ ¼ ½ ½ e-store pricelist dated (Please call us for current best discounts) Page No 4

5 M.S ERW PIPES LARGE DIA AS PER IS 3589 Size / Thickness 3.2mm 4.0mm 4.5mm 5.0mm 5.4mm 6.0mm 6.35mm 8.0mm Size / Thickness G.I ERW PIPES LARGE DIA AS PER IS mm 4.0mm 4.5mm 5.0mm 5.4mm 6.0mm 6.35mm 8.0mm e-store pricelist dated (Please call us for current best discounts) Page No 5

6 M.S Square Tube ERW Rate M.S Square Tube ERW Rate 025 mm x 25 mm 1.6 mm thk mm x 50 mm 1.6 mm thk mm x 25 mm 1.8 mm thk mm x 50 mm 1.8 mm thk mm x 25 mm 2.0 mm thk mm x 50 mm 2.0 mm thk mm x 25 mm 2.3 mm thk mm x 50 mm 2.6 mm thk mm x 25 mm 3.0 mm thk mm x 50 mm 2.9 mm thk mm x 30 mm 1.6 mm thk mm x 50 mm 4.0 mm thk mm x 30 mm 1.8mm thk mm x 72 mm 2.0 mm thk mm x 30 mm 2.0 mm thk mm x 72 mm 2.6 mm thk mm x 30 mm 2.3 mm thk mm x 72 mm 2.9 mm thk mm x 40 mm 1.6 mm thk mm x 80 mm 2.6 mm thk mm x 40 mm 1.8 mm thk mm x 80 mm 3.5 mm thk mm x 40 mm 2.0 mm thk mm x 80 mm 4.0 mm thk mm x 40 mm 2.3 mm thk mm x 100 mm 3.0 mm thk mm x 40 mm 2.6 mm thk mm x 100 mm 4.0 mm thk mm x 40 mm 2.9 mm thk mm x 150 mm 4.0 mm thk mm x 40 mm 4.0 mm thk e-store pricelist dated (Please call us for current best discounts) Page No 6

7 M.S Rectangular Tube ERW Rate M.S Rectangular Tube ERW Rate 050 mm x 25 mm 1.6 mm thk mm x 50 mm 1.8 mm thk mm x 25 mm 1.8 mm thk mm x 50 mm 2.0 mm thk mm x 25 mm 2.0 mm thk mm x 50 mm 2.6 mm thk mm x 25 mm 2.3 mm thk mm x 50 mm 3.5 mm thk mm x 40 mm 1.6 mm thk mm x 61 mm 2.6 mm thk mm x 40 mm 1.8 mm thk mm x 61 mm 3.2 mm thk mm x 40 mm 2.0 mm thk mm x 61 mm 3.5 mm thk mm x 40 mm 2.3 mm thk mm x 61 mm 4.0 mm thk mm x 40 mm 1.6 mm thk mm x 82 mm 3.2 mm thk mm x 40 mm 1.8 mm thk mm x 82 mm 4.0 mm thk mm x 40 mm 2.0 mm thk mm x 92 mm 3.2mm thk mm x 40 mm 2.3 mm thk mm x 92 mm 4.0 mm thk mm x 40 mm 2.6 mm thk mm x 100 mm 4.0 mm thk mm x 40 mm 4.0 mm thk mm x 100 mm 5.0 mm thk mm x 48 mm 3.2 mm thk mm x 48 mm 4.0 mm thk e-store pricelist dated (Please call us for current best discounts) Page No 7

8 S.S FITTINGS ERW #304 Size / Pipe Flanges Long Bend Short Stub End Long Stub End Elbow Cap Std Sch 10 sch 40 asa table D table E sch 10 sch 40 sch10# sch 40# sch 10# sch 40# Sch 10# Sch 40# sch 10 sch 40 ½ ¾ ¼ ½ ½ S.S 304 FLANGES AND FITTINGS Size / Std Tee ASA Flange 304 Dummy 304 Dummy Thick BLRF 304 BLRF ASA CQ SORF 304 T/D T/E sch 10 sch 40 ½ mm ¾ mm mm ¼ mm ½ mm mm ½ mm mm mm mm mm mm e-store pricelist dated (Please call us for current best discounts) Page No 8

9 S.S FITTINGS ERW #316 Size / Pipe Flanges Long Bend Short Stub End Long Stub End Elbow Cap Std Sch 10 sch 40 asa table D table E sch 10 sch 40 sch10# sch 40# sch 10# sch 40# Sch 10# Sch 40# sch 10 sch 40 ½ ¾ ¼ ½ ½ S.S ERW 316 FLANGES AND FITTINGS Size / Std TEE # 316 sch # 316 sch sch 10 sch ½ ¾ ¼ ½ ½ e-store pricelist dated (Please call us for current best discounts) Page No 9

10 IC FITTINGS SS 304 Size / type ¼ 3/8 ½ ¾ 1 1 ¼ 1 ½ 2 Elbow Tee Hex nipple Coupling Union Hose nipple Plug S.S REDUCER SS 304 sch 10 Size Conc Eccn Size Conc Eccn Size Conc Eccn ¾ x ½ x 1 ½ X x ¾ x 1 ¼ x x ½ x x ¼ x x x ¼ x ¾ x 2 ½ x 2 ½ ¼ x ½ x x ½ x 1¼ x 1 ½ x ½ x x 1¼ x ½ x ¾ x x ½ x ½ x x x 1 ½ x x x 1¼ x 2 ½ x x x x x ¾ x x x ½ x ½ x x ½ x1 ½ x 2 ½ ½ x1 ¼ x ½ x x 2 ½ x e-store pricelist dated (Please call us for current best discounts) Page No 10

11 Size In mm M.S SLIPON FLANGE ( MARKET QUALITY) BS- 10(1962) ANSI B 16.5 IS 6392 T/D T/E T/F T/H ASA 150 ASA 300 PN-10 PN-16 PN-40 ISS T/E mm (10mm) mm mm (11mm) mm (14mm) 82.50(12mm) mm (16mm) (14mm) (14mm) (12mm) (16mm) (14mm) (12mm) (13mm) (14mm) (16mm) mm (25mm) (20mm) (16mm) (14mm) (20mm) (16mm) (14mm) (20mm) (16mm) (20mm) (25mm) (28mm) (25mm) (12mm) (12mm) (13mm) mm (25mm) (20mm) (16mm) (13mm) NOTE : (1) MACHINED ALL OVER AS PER BOOK WITHOUT ANY NEGATIVE ALSO AVAILABLE AGAINST ENQUIRY. (2) THICK MENTIONED ABOVE WITHOUT MACHINING TOLERANCE. (3) ENQUIRY FOR HIGHER SIZES SOLICITED. e-store pricelist dated (Please call us for current best discounts) Page No 11

12 M.S SLIPON FLANGE (MARKET QUALITY) Size In mm BS 10 (1962) ANSI B 16.5 IS 6392 T/D T/E T/F T/H ASA 150# ASA 300# PN10 PN 16 PN - 40 ISS T/E (12mm) (10mm) (16mm) (12mm) (20mm) (16mm) (12mm) (20mm) (16mm) (12mm) (20mm) (16mm) (12mm) (20mm) (16mm) (12mm) (20mm) (16mm) (12mm) (20mm) (16mm) (12mm) (16mm) (14mm) (16mm) (20mm) (16mm) (25mm) (20mm) (25mm) (20mm) (20mm) (20mm) (25mm) (20mm) (25mm) (25mm) (28mm) (30mm) (30mm) (25mm) (25mm) (25mm) (25mm) (20mm) (16mm) (25mm) (22mm) (20mm) (25mm) (22mm) (30mm) (25mm) (20mm) (32mm) (25mm) (20mm) (30mm) (25mm) (20mm) (30mm) (25mm) (20mm) (30mm) (25mm) (20mm) (30mm) (25mm) (25mm) (36mm) (25mm) (25mm) PRICES OF PN-16 & PN -40 ON REQUEST (20mm) (20mm) (25mm) (30mm) (26mm) (30mm) (16mm) (20mm) (16mm) (20mm) (16mm) PRICES HIGHER SIZES UPTO 1800 NB ON REQUEST THICKNESS & O.D OF FLANGES AS PER BOOK STD WITH UPTO APPROX -1 MM TOLERANCE e-store pricelist dated (Please call us for current best discounts) Page No 12

13 Size in N.B M.S DUMMY FLANGE ( MARKET QUALITY) BS- 10(1962) ANSI B 16.5 IS 6392 T/D T/E T/F T/H ASA 150 ASA 300 PN10 PN 16 PN - 40 ISS T/E mm thick mm thick mm thick (14mm) (12 mm) (14 mm) (14 mm) (16 mm) (20 mm) (12 mm) (12 mm) (13mm) (16mm) (16mm) (20mm) mm thick ( 25mm) mm mm mm mm mm mm mm mm mm mm mm mm mm mm (20 mm) (25 mm) (28mm (25 mm) (30mm e-store pricelist dated (Please call us for current best discounts) Page No 13

14 Size In mm M.S DUMMY FLANGE (MARKET QUALITY) B.S 10 (1962) ANSI B 16.5 IS T/D T/E T/F T/H ASA 150# ASA 300# PN -10 PN - 16 PN-40 T/E mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm (16 mm) (16 mm) (20mm mm mm - 20 mm mm -20 mm mm thick mm thick mm thick mm thick mm mm mm mm mm mm mm mm mm mm thick mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm PRICES OF PN 16 & PN 10 ON REQUEST PRICES HIGHER SIZES UPTO 1800 NB ON REQUEST mm mm mm mm mm mm mm mm mm mm mm mm mm mm THICKNESS & O.D OF FLANGES AS PER BOOK STD WITH UPTO APPROX -1 MM TOLERANCE e-store pricelist dated (Please call us for current best discounts) Page No 14

15 M.S THREADED FLANGE 1 1 ½ 2 2 ½ Table D Table E Table D Table E G.I THREADED FLANGE ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ e-store pricelist dated (Please call us for current best discounts) Page No 15

16 Size M.S LONG BEND ERW P/E SEAMLESS U BEND ISS ERW ISS Seamless B C Ord sch 40# Sch.40 L/R Sch.40 S/R C SCH 40 SCH 80 Expansion Bend SCH 40 ISS ERW B G.I LONG BEND 15 ½ ¾ ¼ ½ ½ R=3D R=3D R=3D R=3d e-store pricelist dated (Please call us for current best discounts) Page No 16

17 BUTT-WELD ELBOWS ERW SEAMLESS ISS ERW C TVM PREMIUM 45 DEG G.I. ERW Size MM/Inch B C #40 ERW C SCH-40 SCH 80 ERW C SCH-40 B (elect) C (Elect) B (Hot Dip) C (Hot Dip) 15- ½ ¾ ¼ ½ ½ (4mm) (4mm) (4mm) e-store pricelist dated (Please call us for current best discounts) Page No 17

18 M.S REDUCER ERW Size ERW Size ERW Size ERW Conc. Ecc. Conc. Ecc. Conc. Ecc. ¾ x ½ x x x ¾ x 2½ x x ½ x x ¼ x x 1 ½ x ¼ x ¾ x 1 ¼ x ¼ x ½ x x ½ x 1¼ x x ½ x x x ½ x ¾ x 2 ½ x ½ x ½ x x x 1 ½ x x x 1¼ x x x x x x ¾ x 2 ½ X x ½ x X ½ x X X ½ x1 ½ x X ½ x1 ¼ x X ½ x x X x 2 ½ x 2 ½ X x x x x 1 ½ x x 1 ¼ x x x e-store pricelist dated (Please call us for current best discounts) Page No 18

19 BUTT WELD REDUCERS CONCENTRIC & ECCENTRIC Seamless FCS SCH-40 FCS SCH-80 FCS SCH-40 FCS SCH-80 FCS SCH-40 FCS SCH-80 Size Size Conc. Ecc. Conc. Ecc. Conc. Ecc. Conc. Ecc. Conc. Ecc. Conc. Ecc. ¾ x ½ x 1 ½ x x ¾ x 1 ¼ x x ½ x x ¼ x x x ¼ x ¾ x 2 ½ x ¼ x½ x x ½ x1¼ x 1 ½ x ½ x x 1¼ x ½ x ¾ x x ½ x ½ x x x 1½ x 2 ½ x x 1 ¼ x X x x X x ¾ x X x ½ x ½ x x 2 ½ ½ x1½ x ½ x1¼ x ½ x x x 2 ½ x x x e-store pricelist dated (Please call us for current best discounts) Page No 19

20 Size ERW B TUBES & VALVES MANUFACTURING COMPANY ERW C Seamless Sch.40 Seamless Sch.80 BUTTWELD TEE Size ERW R/ Tee Seamless Sch.40 R/Tee Size ERW R/ Tee Seamless Sch.40 R/Tee ½ x ¾ x ¾ x ½ x /4 x x 2 ½ ¼ ¼ x ¾ x ½ ¼ x ½ x ½ x 1 ¼ x ½ ½ x x ½ x ¾ x 2 ½ ½ x ½ x x 1 ½ x x 1 ¼ x x x x ¾ x x ½ x 2 ½ ½ x x ½ x 1 ½ x ½ 1 ¼ x ½ x x x 2 ½ x x x x 1 ½ x x 11 / x x x x x 2 ½ x x 1 ½ x 1 ¼ x e-store pricelist dated (Please call us for current best discounts) Page No 20

21 SEAMLESS SCH 40 CARBON STEEL B/W FITTINGS AS PER ASTM, - A 234-GR WPB DIM ANSI A FCS ASTM A 105 flanges as per ANSI STD Size SCH 40 SCH 80 Size SORF SORF SORF WNRF WNRF SWRF SWRF In mm Cap Cap #150 # 300 # 600 #150 #300 #150 # NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB e-store pricelist dated (Please call us for current best discounts) Page No 21

22 M.S FORGED FITTINGS BSP SCREWED VS / EQUIVALENT ¼ 3/8 ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ 3 Elbow Tee Union Coupling Hex Nipple Cross Cap Hose Collar Plug M/F Elbow FORGED STEEL FITTINGS SCREWED FITTINGS BSP (REDUCING) R / Elbow R / Tee R / Coupling R/ Hex Nipple R / Bush 3/8 x ¼ ½ x 3/ ½ x ¼ ¾ x ½ ¾ x 3/ ¾ x ¼ x ¼ x 3/ x ½ x ¾ ¼ x ½ ¼ x ¾ ¼ x ½ x ½ ½ x ¾ ½ x ½ x 1 ¼ x ½ x ¾ x x 1¼ x 1½ e-store pricelist dated (Please call us for current best discounts) Page No 22

23 F.C.S FITTINGS CONFORM ASTM 105 ANSI B SOCKETWELD 3000 LBS ¼ 3/8 ½ ¾ 1 1 ¼ 1 ½ Elbow Equal Tee Union Cap Full Coupling Half Coupling FORGED STEEL FITTINGS / SOCKET WELD FITTINGS (REDUCING) Reducing Elbow S/W Reducing Tee S/W Reducing Coupling S/W 1 x ¾ x ½ ¼ x ¼ x ¾ ¼ x ½ ½ x 1¼ ½ x ½ x ¾ ½ x ½ x 1 ½ x 1 ¼ x x ¾ x ½ e-store pricelist dated (Please call us for current best discounts) Page No 23

24 F.C.S A 105 FITTING NPT THREADED 3000 LBS PARTICULARS ¼ 3/8 ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ 3 Elbow S/E EQ. & UnequalTee FullCoupling HalfCoupling Union Hex Plug Hex Nipple Cap Sockolet/weldolet/ Size MM/ Inch CAST STEEL SCREWED FITTINGS Elbow Tee Union Plug Hex Nipple Cross 15 ½ ¾ ¼ ½ ½ CAST STEEL BUSH S/E 1 ½ x1 ¼ - 2 ½ x1 ½ x 1 ½ x 1 ½: - 1 ½ x 1, ¾ - 2 ½ x 1 ¼ - 3 x 1 ¼ - 4 x 1-2 x 1 ½ - 2 ½ x 1-4 x x 4,3-2 x 1 ¼,1-3 x 2 ½ x 2 ½ x 5,4,3-2 ½ x x x e-store pricelist dated (Please call us for current best discounts) Page No 24

25 MS Pipe Nipple (Medium) MS PIPE NIPPLE C CLASS HEAVY SEAMLESS PIPE NIPPLE SCH 40# Size Size Size ¼ ¼ ¼ / / / ½ ½ ½ ¾ ¾ ¾ ¼ ¼ ¼ ½ ½ ½ ½ ½ ½ M.S STEEL SCREWED FITTINGS Coupling Elbow Tees Hex Nipple Cap 40-1½ ½ O.R OR O.R OR O.R OR - O.R Size MM/ Inch M.S STEEL BUSH S/E 1 ½ x1 ¼ - 2 ½ x1 ½ x 1 ½ ½ x 1, ¾ - 2 ½ x 1 ¼ - 3 x 1 ¼ - 2 x 1 ½ - 2 ½ x x x 1 ¼,1-3 x 2 ½ x 2 ½ ½ x x x e-store pricelist dated (Please call us for current best discounts) Page No 25

26 G.I PIPE NIPPLES(NEW PIPES) B CLASS Size ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ A 3 A 4 A 3 Long Long Long Long Long G.I U Clamp Size 8 mm 10 mm 12 mm 16 mm M.S BOLT NUTS ½ Size / length 1 ½ 2 long 2 ½: 3 long 3 ½ 4 long 5 6 long ¾ ½ / ¼ ¾ ½ / G.I BOLT NUTS 2 ½ Size / length 1 ½ 2 long 2 ½: 3 long 3 ½ 4 long 5 6 long ½ / ¾ / e-store pricelist dated (Please call us for current best discounts) Page No 26

27 G.I ISI FITTINGS ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ Elbow Tee Coupling Union Hex Nipple ¾ x ½ 1 x ¾ 1 x ½ 1¼ x 1 1¼ x ¾ 1¼ x ½ 1½ x 1¼ 1½ x 1 1½ x ¾ 1½ x ½ 2 x 1½ R / Elbow R / Tee R/Coupling x 1¼ 2 x 1 2 x ¾ 2 x ½ R / Elbow R / Tee R/Coupling G.I R Brand Fittings ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ Elbow Tee Coupling Union Hex Nipple ¾ x ½ 1 x ¾ 1 x ½ 1¼ x 1 1¼ x ¾ 1¼ x ½ 1½ x 1¼ 1½ x 1 1½ x ¾ 1½ x ½ 2 x 1½ R / Elbow R / Tee R/Coupling x 1¼ 2 x 1 2 x ¾ 2 x ½ R / Elbow R / Tee R/Coupling e-store pricelist dated (Please call us for current best discounts) Page No 27

28 Size in mm TUBES & VALVES MANUFACTURING COMPANY C.S. FITTINGS FLANGE BEND WITH IBR TEST CERTIFICATE IN FORM III C FLANGES Blind Flange LONG BENG ELBOW EXPANSION T/H ND 40 ASA 150 ASA-300 Table H ASA-150 SCH-40 SCH-80 SCH-40 SCH-80 SCH-40 BW TEE SCH MM MM MM MM MM MM MM MM MM MM MM MM MM MM CAP SCH-40 Particular SE FITTINGS WITH IBR TC SW FITTINGS IN IBR TC Particular 15 MM 20MM 25MM 32MM 40MM 50MM 15 MM 20MM 25MM 32MM 40MM 50MM Elbow Elbow Tee Tee Coupling Coupling Union Union H / Nipple Plug e-store pricelist dated (Please call us for current best discounts) Page No 28

29 C.S REDUCERS WITH IBR IN FORM III C Size Sch40 Conc Sch 40 Eccn Size Sch40 Conc Sch 40 Eccn Size Sch40 Conc Sch 40 Eccn ¾ x ½ ½ x x x ¾ ½ x1½ x x ½ ½ x1¼ x 2 ½ ¼ x ½ x x ¼ x ¾ x 2 ½ x ¼ x½ x x ½ x1¼ x 1 ½ x ½ x x 1 ¼ x 2 ½ ½ x ¾ x x ½ x ½ x x x 1½ x 2 ½ x x 1 ¼ x x x x 1 ½ x x ¾ x 1¼, x ½ e-store pricelist dated (Please call us for current best discounts) Page No 29

30 Ball Valves Particulars Make ¼ & 3/8 ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ 3 4 C.I Ball Valve S/E Bajpai C.I Ball Valve F/E S.pcs Bajpai C.I Ball Valve F/E 3.pcs Bajpai SS.202 Ball Valve B/S S/E Bajpai S.S 304 Ball Valve(I/C)304 S/E Local G.M Ball valve Imported S/E Matrix /Piero G.M Gate Valve ISI S/E R brand G.M. Ball Valves S/E R brand BALL VALVES (FLOWJET) ¼ 3/8 ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ 3 4 CAST IRON FULL BORE SCREWED END SINGLE PIECE DESIGN 3 PCS DESIGN S.S 304 CF8 (I/C) FULL BORE S.S 316 CF8M (I/C) FULL BORE S.S 3043 WAY S\E S.S 304 CF8 (I/C) S/E OR S/W S.S 316CF8 (I/C) S/E OR S/W F.C.S A 105 S/E OR S/W e-store pricelist dated (Please call us for current best discounts) Page No 30

31 BALL VALVE FLANGED END FLOWJET MAKE ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ CAST IRON F/E TO ASA PCS DESIGN CAST STEEL (I/C) S.S 304 CF8 (I/C) S.S 316 CF8M (I/C) Note :- class 300 lbs, 600 lbs, Fire safe, Jacketted Valves, Higher Sizes, Actuator operated are on request. C.I Butterfly Valve Particulars Make 1 1 ¼ 1 ½ 2 2 ½ Bajpai Nitrile Moulded Sleeve S.G Iron Disc/SS 410 spindle(black) -DO- EPDM lining 304 working parts Flowjet Flowjet AUDCO e-store pricelist dated (Please call us for current best discounts) Page No 31

32 Cast Steel Valves Non IBR CREST Make Particulars ½ ¾ 1 1 ½ 2 2 ½ Globe Valve ND 40# /ASA 150 lbs Gate Valve N.R.V Lift type Swing check valve Y Stainer CAST STEEL VALVES NON I.B.R FLOWJET MAKE 1 1 ½ 2 2 ½ Gate Valves Globe Valves Swing Check Valves Y Strainer Class 150# Class 300# Class 150# Class 300# Class 150# Class 300# Class 150# e-store pricelist dated (Please call us for current best discounts) Page No 32

33 C.I SLUICE VALVES PARTICULARS 1 1 ½ 2 2 ½ F/E TO T/D POPULAR /PILOT F/E TO ISS DEEPAK/AARKO ISI F/E TO ISS KOLEY/DIVINE C.I NRV (REFLEUX VALVE) PARTICULARS 1 ½ 2 2 ½ F/E TO ISS POPULAR / DIVINE F/E TO #150 DEEPAK /AARKO C.I Y STAINER PARTICULARS ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ CREST / VALSON / EQUIP F/E FLOWJET C.I T POT STAINER PARTICULARS 1 ½ 2 2 ½ F/E TO T/D AARKO / VALSON C.I FOOT VALVES PARTICULARS 2 2 ½ LIFT TYPE F/E DIVINE Swing Type F/E V V Make e-store pricelist dated (Please call us for current best discounts) Page No 33

34 S.S NEEDLE VALVES S/E PARTICULARS ¼ 3/8 ½ ¾ 1 1 ¼ 1 ½ 2 BARSTOCK BAJPAI 202 barstock BARSTOCK Flowjet BARSTOCK Flowjet C.I DIAPHRAGM VALVE Particulars ¾ 1 1 ¼ 1 ½ 2 2 ½ F/E Unlined BSCO F/E Rubber Lined BSCO Spare Diaphragm Natural F/E Ebonite lined BSCO G.M VALVES (STEAM LINE) ATAM MAKE ½ ¾ 1 1¼ 1½ 2 GLOBE VALVES NO 9 S/E ATAM GLOBE VALVE TO T/F F/E ATAM NONRETURN VALVE S/E (AV 27 ) ATAM SAFETY VALVES STRAIGHT S/E ATAM SAFETY VALVE ANGLE S/E ATAM STEAM TRAP S/E ATAM Y STAINER S/E ATAM GLAND PACKED GUAGE GLASS COCK SET S/E ATAM GLAND PACKED GUAGE GLASS COCK SET F/E ATAM SIGHT GLASS S/E ATAM NON RETURN VALVE FOOT VALVE e-store pricelist dated (Please call us for current best discounts) Page No 34

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY CONSTRUCTION B 16.34 API 6A - API 6D BS 5351 EN 17292 SIZE FROM 1/2 TO 60 REDUCED AND FULL BORE CLASS

More information

B.R.ENTERPRISE. One piece Two piece Three piece Four piece Cryogenic Trunnion Mounted

B.R.ENTERPRISE. One piece Two piece Three piece Four piece Cryogenic Trunnion Mounted Web Site : www.brvalves.in ABOUT US Established in 1 st August, 2014, B.R.Enterprise has been involved in Trading and Supplying of various industrial products like Industrial Valves, Actuated Valves, Pipes

More information

SEAMLESS WELDED FITTINGS

SEAMLESS WELDED FITTINGS SEAMLESS WELDED FITTINGS WALL THICKNESS NPS Pipe 2 A B K D V E F G O.D. Light SCH SCH STD SCH SCH X-SIG SCH SCH SCH SCH SCH XX NPS Wall 20 0 40 60 80 00 20 40 60 Stg ASA MSS /2.840.08 --- ---.09.09 ---.4.4

More information

WELDED AND SEAMLESS PIPE

WELDED AND SEAMLESS PIPE WELDED AND SEAMLESS PIPE MATERIAL SPECIFICATIONS Antec offers a stock range of seamless and longitudinally welded pipe to American standards, with other specifications (eg: spirally welded) available to

More information

Stainless Steel Pipe and Flanges

Stainless Steel Pipe and Flanges Stainless Steel Pipe and Flanges Stainless Steel 4 Pipe and Flanges Photography courtesy of Outokumpu, Arcelor, Atlas Steels and New Zealand Tube Mills. Stainless steel pipe and fittings A stainless steel

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 1 Materials 1 Body Ductile Iron GGG40 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE

More information

Forged High Pressure Pipe Fittings

Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Type 1. Elbow, Tee, Cross, Coupling, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage nipple, Bull Plug, Street

More information

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1 Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers)

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) Spectifications ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) ANSI / ASME B1.20.1 ASME B16.10 ASME B16.11 ASME B16.25 ANSI / ASME B16.28 ANSI / ASME B16.34

More information

Stainless steel tube & pipe fittings

Stainless steel tube & pipe fittings ASD metal services klöckner & co multi metal distribution Stainless steel tube & pipe fittings ENTRUSTED TO DELIVER METAL SOLUTIONS FPAL UVDB Verify Registered Verified BRO 1604-2 07/13 Introduction ASD

More information

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved

More information

PWGSC Ontario STEAM AND CONDENSATE Section Region Project HEATING PIPING Page 1 Number R

PWGSC Ontario STEAM AND CONDENSATE Section Region Project HEATING PIPING Page 1 Number R Region Project HEATING PIPING Page 1 PART 1 - GENERAL 1.1 SECTION.1 Materials and installation of steel piping INCLUDES valves, fittings for steam and condensate building services piping. 1.2 RELATED.1

More information

WEIGHT OF PIPING MATERIALS

WEIGHT OF PIPING MATERIALS WEIGHT OF PIPING MATERIALS WEIGHTS OF PIPING MATERIALS INTRODUCTION The tabulation of weights of standard piping materials presented on the following pages has been arranged for convenience of selection

More information

STANDARD SPECIFICATION FOR IMPULSE PIPING & TUBING DOCUMENT NO : 44-LK /J.02/0015-A4

STANDARD SPECIFICATION FOR IMPULSE PIPING & TUBING DOCUMENT NO : 44-LK /J.02/0015-A4 Page 1 of 5 STANDARD SPECIFICATION FOR IMPULSE PIPING & TUBING DOCUMENT NO : 44-LK-5100-00/J.02/0015-A4 Rev No. Issue Date Pages Rev Description Prepared A 12.08.08 5 Issued for Comments / Approval Checked

More information

Hose Clamps & Fittings

Hose Clamps & Fittings All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw

More information

CONSULTANT PROCEDURES & DESIGN GUIDELINES Steam and Condensate Piping and Pump Systems

CONSULTANT PROCEDURES & DESIGN GUIDELINES Steam and Condensate Piping and Pump Systems GENERAL: Steam and condensate piping and pump systems included in this document are for building systems starting at the pressure reducing station (PRV). DESIGN GUIDELINES: A. Design General 1. Definitions:

More information

January 29, 2015 L-1 STEEL PIPE

January 29, 2015 L-1 STEEL PIPE January 29, 2015 L-1 STEEL PIPE STANDARD GALVANIZED PIPE THREADED & COUPLED Lbs Pieces Average External Internal Per Per Feet Per SSC No. Size Lgth Diameter Diameter Foot Bundle Bundle Price Each Price

More information

PRIMARY VALVE STANDARDS

PRIMARY VALVE STANDARDS PRIMARY VALVE STANDARDS MAJOR VALVE STANDARDS PETROCHEMICAL AND REFINING INDUSTRY API 600 Steel Valves Flanged & Buttwelding Ends API 600 is the main steel gate valve specification. Valve design and construction

More information

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for

More information

ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.

ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16. ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe

More information

PE100 pressure fittings

PE100 pressure fittings Table of contents Table of contents...1 pressure fittings Short fittings for butt-welding Stub flanges...2 Tees...8 Bends...15 Reducers...17 End caps...26 Unions...28 Adaptors...34 Long fittings Stub flanges...36

More information

PRODUCT CATALOGUE. Cryogenic Valves

PRODUCT CATALOGUE. Cryogenic Valves PRODUCT CATALOGUE Cryogenic Valves A FEW FACTS ABOUT MACK S. Since its establishment in 1939, Mack Valves have grown to become a leading provider of unique flow control, pressure reducing and safety relief

More information

Stainless Steel Threaded Pipe Nipples

Stainless Steel Threaded Pipe Nipples TYPE 304/ Schedule 40 Welded DIAM LENGTH PRICE LENGTH IN INCHES Stainless Steel Threaded Pipe Nipples INCHES OF CLOSE EACH 1-1/2 2 2-1/2 3 3-1/2 4 4-1/2 5 5-1/2 6 7 8 9 10 11 12 1/8 3/4 13.60 17.79 21.24

More information

Page Series Type Material Pressure

Page Series Type Material Pressure Table of Contents Page Series Type Material Pressure DIN Gates 3 1001 NRS Cast Iron PN10 4 1011-1012 NRS Cast Steel PN16 5 1022 NRS Bronze PN16 6 1032 NRS Ductile Iron PN16 7 1202 NRS Cast Iron PN16 8

More information

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below: Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees

More information

PRODUCT LIST. BALON Ball Valves, Cast Iron, Cast Steel, SS AMERICAN AMETEK APOLLO VALVES AUTOMAX ATOMAC BURKERT BONNY FORGE CANVIL CENTRON CENTERLINE

PRODUCT LIST. BALON Ball Valves, Cast Iron, Cast Steel, SS AMERICAN AMETEK APOLLO VALVES AUTOMAX ATOMAC BURKERT BONNY FORGE CANVIL CENTRON CENTERLINE PRODUCT LIST AMERICAN AMETEK APOLLO VALVES AUTOMAX ATOMAC Ball Valves, Cast Iron, Cast Steel, Stainless Steel, Teflon Fused Ball Pressure Gauges, Diaphragm Seals Bronze, Steel & Stainless Steel, Ball Valves,

More information

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from

More information

Oil & Gas Products. Stock Program

Oil & Gas Products. Stock Program Oil & Gas Products Stock Program Table of contents Introduction /Index Chapter 1 Introduction Page 2 Table of contents 3 About Brdrene Dahl 4 Logistics and central warehouse at Langhus Stainless steel,

More information

Stainless Steel Piping Products

Stainless Steel Piping Products Stainless Steel Piping Products Stainless Steel and Other Corrosion Resistant Metal Pipe, Tubing, Flanges and Fittings ALASKAN COPPER WORKS A laskan stainless steel pipe and fittings are found throughout

More information

WORLD WIDE METRIC OFFERS:

WORLD WIDE METRIC OFFERS: V A L V E S F I T T I N G S T U B I N G F L A N G E S C O U P L I N G S E X P A N S I O N J O I N T S M E T A L S World Wide Metric First choice for quality, service & knowledge Established in 1970, World

More information

CODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts.

CODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts. CODES AND STANDARDS T. N. GOPINATH For scientific design of Piping Systems, selection of proper material of construction and to detail out the material specifications, knowledge of Codes and Standards

More information

B. Provide low pressure steam via a two-parallel full capacity pressure reducing stations with 33/67% pressure reducing valves (PRV s).

B. Provide low pressure steam via a two-parallel full capacity pressure reducing stations with 33/67% pressure reducing valves (PRV s). SECTION 23 22 00 STEAM AND CONDENSATE PIPING AND PUMPS PART 1 - GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated

More information

Industrial Thermoplastic Process Piping System Products & Services

Industrial Thermoplastic Process Piping System Products & Services Industrial Products & Services Industrial Thermoplastic Process Piping System Products & Services Thermoplastic Products Pipe PVC, CPVC, PVDF, PP, PTFE Fittings PVC, CPVC, PVDF, PP, PTFE Manual Valves

More information

General Purpose Pipe Product Shortname: GPIP - Galvanised Pipe BPIP - Primed Pipe/Black Pipe

General Purpose Pipe Product Shortname: GPIP - Galvanised Pipe BPIP - Primed Pipe/Black Pipe Pipe 34 Pipe General Purpose Pipe Product Shortname: GPIP - Galvanised Pipe BPIP - Primed Pipe/Black Pipe Specifications: AS 1074-1989 AS 1163-2009 Grade C350 (SL and LT w/t) AS 1163-2009 Grade C250 (MD

More information

Bestobell Valves. Product Catalogue

Bestobell Valves. Product Catalogue Bestobell Valves Product Catalogue 2015-2016 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Company Background Bestobell

More information

Stainless Steel Tubular Products

Stainless Steel Tubular Products Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary

More information

Stainless Steel Tube and Fittings

Stainless Steel Tube and Fittings Stainless Steel Tube and Fittings Stainless Steel 5 Tube and Fittings Photography courtesy of Outokumpu, Arcelor and New Zealand Tube Mills. Stainless steel tube and fittings As-welded (AW) tube Stainless

More information

Transport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.

Transport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com. Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index

More information

MALLEABLE IRON FITTINGS 150lb Malleable Iron Pipe Fitting List Prices (I-0513) 300lb Malleable Iron Pipe Fitting List Prices (XHI-0513)

MALLEABLE IRON FITTINGS 150lb Malleable Iron Pipe Fitting List Prices (I-0513) 300lb Malleable Iron Pipe Fitting List Prices (XHI-0513) MALLEABLE IRON FITTINGS 150lb Malleable Iron Pipe Fitting s (I-0513) 300lb Malleable Iron Pipe Fitting s (XHI-0513) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested

More information

Caps STANDARD WEIGHT Inches / Pounds

Caps STANDARD WEIGHT Inches / Pounds Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe

More information

MARCH Polyethylene Piping Systems.

MARCH Polyethylene Piping Systems. MARCH 2016 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional

More information

WALKWAYS LADDER RUNGS

WALKWAYS LADDER RUNGS BACK FORWARD STEEL PLATES/ LAMINAS/ PLANCHAS SAFETY PRODUCTS STEEL PLATES LAMINAS PLANCHAS ASTM A 36 A 36 ABS CERTIFIED AR 400 AR 500 ASTM 514 ASTM A 515 GR 50/60/70 ASTM A 516 GR 50/60/70 CORTEN OR ASTM

More information

OUR STAFF We are well equipped to service and support

OUR STAFF We are well equipped to service and support www.allvalve.com.au COMPANY PROFILE All Valve Industries is an importer and distributor of valves and associated products in Australia. Our company has a long standing reputation for supplying quality

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

PRODUCTS & SERVICES CATALOGUE

PRODUCTS & SERVICES CATALOGUE PRODUCTS & SERVICES CATAOGUE 10 TH EDITION SEAMESS & WEDED PIPE 29 SPECIFICATIONS: ENGTHS: ASTM A312M-08 6.1 METRE/RANDOMS FINISH: WEDED ANNEAED & PICKED SEAMESS COD FINISH/HOT FINISH NB PIPE SIZE SIZE

More information

Product Catalogue Australian Plumbing Fittings

Product Catalogue Australian Plumbing Fittings Capillary Sizes ELBOWS - 90 Degree J08123 15mm x 15mm 90Deg LE Cu SR ELB F+F (No. 12) J08131 18mm x 18mm 90Deg LE Cu ELB F+F (No. 12) J08145 20mm x 20mm 90Deg LE Cu SR ELB F+F (No. 12) J08147 20mm x 15mm

More information

3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide

3, 4, 6 & 8 Model H Series Alarm Check Valve Installation and Maintenance Guide ", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,

More information

5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:

5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose: PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

Delhi Urban Shelter Improvement Board Govt. of NCT of Delhi Office of Executive Engineer C-1

Delhi Urban Shelter Improvement Board Govt. of NCT of Delhi Office of Executive Engineer C-1 To DSRItem Delhi Urban Shelter Improvement Board Govt of NCT of Delhi Office of Executive Engineer C- Name of Work : C/O 980 (G+4) five storeyed EWS low cost Housing for slum Dwellers (under JNNURM) at

More information

Orifice Plates. Specifications

Orifice Plates. Specifications Orifice Plates Orifice plates are most commonly used primary elements for flow measurement in pipelines based on the principle of measurement of differential pressure created when an obstruction is placed

More information

F250/F251 HYGIENIC BUTTERFLY VALVES PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) WELD/CLAMP/THREAD END CONNECTIONS

F250/F251 HYGIENIC BUTTERFLY VALVES PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) WELD/CLAMP/THREAD END CONNECTIONS PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) F0/F HYGIENIC BUTTERFLY VALVES WELD/CLAMP/THREAD END CONNECTIONS FOOD & BEVERAGE PROCESS SOLUTIONS PROCESS VALVE TECHNOLOGY PENTAIR HYGIENIC PROCESS

More information

WADE SPECIFICATION DRAINAGE PRODUCTS

WADE SPECIFICATION DRAINAGE PRODUCTS 310 CLOSET CARRIERS WATER CLOSET CARRIER ASSEMBLIES Consists of carrier fitting and faceplate assembly with neoprene gasket, 11-in. plastic coupling/test cap and hardware 350/370 CLOSET CARRIERS VERTICAL

More information

Stainless steel hygienic butterfly valves. F250 for imperial tubing F251 for metric tubing

Stainless steel hygienic butterfly valves. F250 for imperial tubing F251 for metric tubing Stainless steel hygienic butterfly valves. F0 for imperial tubing F for metric tubing Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.

More information

CARBON STEEL PIPE - BUTTWELD

CARBON STEEL PIPE - BUTTWELD 010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 15.52 10.86 1/4" 0.42 17.01 15.72 23.88 20.40 3/8" 0.57 22.68 20.96 31.84 27.21 1/2" 0.85

More information

HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company.

HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company. HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company. Based on superb and fair business relationships to long-standing

More information

Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345

Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:

More information

Aeon is a leading designer, manufacturer and worldwide supplier of superior, advanced design valves for the Water, Gas and Fire Protection markets.

Aeon is a leading designer, manufacturer and worldwide supplier of superior, advanced design valves for the Water, Gas and Fire Protection markets. Product Profile Aeon is a leading designer, manufacturer and worldwide supplier of superior, advanced design valves for the Water, Gas and Fire Protection markets. Aeon s unique valve technology offers

More information

MALLEABLE IRON THREADED FITTINGS

MALLEABLE IRON THREADED FITTINGS MALLEABLE IRON THREADED FITTINGS /METRIC INDEX MALLEABLE IRON THREADED FITTINGS PAGE 90 ELBOWS CLASS 150 M.I. 4 CLASS 300 M.I. 12 PAGE 90 STREET ELBOWS CLASS 150 M.I. 8 90 REDUCING ELBOWS CLASS 150 M.I.

More information

SERIES C CRYOGENIC BALL VALVES

SERIES C CRYOGENIC BALL VALVES SERIES C CRYOGENIC BALL VALVES SHARPE HIGH PERFORMANCE CRYOGENIC BALL VALVES Sharpe Cryogenic Series Ball Valves offer as standard features advantages that other valve manufacturers offer only as costly

More information

Integral Block & Bleed Valves. High Technology Valve & Fitting Series

Integral Block & Bleed Valves. High Technology Valve & Fitting Series Integral Block & Bleed Valves High Technology Valve & Fitting Series SUPERLOK instrumentation products has the ultimate solutions for a compact range of one-piece forged body integral block & bleed valves,

More information

RING JOINT SYSTEMS 207

RING JOINT SYSTEMS 207 RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI

More information

Flanged and Butt-= Weld Type

Flanged and Butt-= Weld Type Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design

More information

MACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)

MACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04) MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer

More information

KEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing

KEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing KEYSTONE Stainless steel hygienic butterfly valves F0 for imperial tubing F for metric tubing Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.

More information

ON-OFF FLOAT CONTROL VALVE

ON-OFF FLOAT CONTROL VALVE ON-OFF FLOAT CONTROL VALVE (4 and Smaller) /08 Schematics Opens when float reaches low level stop Closes when float reaches high level stop Low and High Level stop collars are adjustable P/L X Standard

More information

Stainless Steel 150# Fittings Threaded & Socket Weld

Stainless Steel 150# Fittings Threaded & Socket Weld CORPORTE OFFICE TEL (800) 766-0076 LOCL (323) 890-4455 FX (323) 890-4456 WWW.SMITHCOOPER.COM Stainless Steel 150# Fittings Threaded & Socket Weld 150# Stainless Fittings Specifications Stainless Castings

More information

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve.

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve. INOX-VAL SERIES 70000 STAINLESS STEEL BALL VALVE pc stainless steel ASTM A35 - CF8M ball valve. psi TUV T.A.Luft approved. COMPLIES WITH NACE MR 075, NACE MR 003 AND ISO 55 AVAILABLE FIRE SAFE APPROVED

More information

www.klmtechgroup.com TABLE OF CONTENTS

www.klmtechgroup.com TABLE OF CONTENTS Page : 1 of 216 TABLE OF CONTENTS 1 GENERAL 2 1.1 Scope 2 1.2 Code and s 2 1.3 Pressure-Temperature Design 6 1.4 Pipe Wall Thickness Allowance 7 1.5 Ends 8 1.6 Units 8 1.7 Language 9 2 MATERIAL 9 2.1 General

More information

Pipe Fittings & Steel Nipples

Pipe Fittings & Steel Nipples Pipe Fittings & Steel Nipples NOVEMER 20 For the most current product/pricing information on nvil products, please visit our website at uilding Connections That Last For over 60 years, nvil has worked

More information

SSI Equipment Inc. Strainers Valves Connectors

SSI Equipment Inc. Strainers Valves Connectors Cast Cast Threaded, Socket Weld And Sweat Y- Size Range: 1/4 to 3 (8 mm to 80 mm) Cast Iron (A126-B), Bronze (B62), Carbon Steel (WCB, LCB, LCC), Chrome-Molly (WC6, WC9), Stainless Steel (CF8M) and Alloy

More information

STAINLESS STEEL PIPE ASTM A312 WELDED

STAINLESS STEEL PIPE ASTM A312 WELDED 020-1 STAINLESS STEEL PIPE ASTM A312 WELDED SCHEDULE 40 SCHEDULE 10 WEIGHT WEIGHT SIZE LBS/FT T-304/L T-316/L SIZE LBS/FT T-304/L T-316/L 1/2" 0.85 10.72 14.79 1/2" 0.67 8.28 11.11 3/4" 1.13 13.28 17.89

More information

SECTION STEAM AND CONDENSATE HEATING PIPING

SECTION STEAM AND CONDENSATE HEATING PIPING SECTION 23 22 13 STEAM AND CONDENSATE HEATING PIPING PART 1 - GENERAL 1.1 DESCRIPTION A. Steam, condensate and vent piping inside buildings. Boiler plant and outside steam distribution piping is covered

More information

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves. Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire

More information

Corporate Office: Regd.Office & Works. Website: JPL CAT-01, Issue No. 03, Rev. No.2; Date

Corporate Office: Regd.Office & Works. Website:  JPL CAT-01, Issue No. 03, Rev. No.2; Date Corporate Office: Website: www.jindal.com Regd.Office & Works Mumbai Kolkata JPL CAT01, Issue No. 03, Rev. No.2; Date 03.10.2012 Chennai About us: MANUFACTURING AND TESTING FLOW DIAGRAM ELECTRIC RESISTANCE

More information

PVC Pipes & Fittings PVC PIPES. AW / AE PVC Pipes. PVC Pipes & Fittings

PVC Pipes & Fittings PVC PIPES. AW / AE PVC Pipes. PVC Pipes & Fittings PVC PIPES 284 AW / AE PVC Pipes ALP 0001 Nominal Size CL Mean OD Thickness (t) Length (L) Weight ALP 0001-1 15 (1/2 ) E 21.35 1.7 5.8 0.95 ALP 0001-2 20 (3/4 ) E 26.75 1.9 5.8 1.37 ALP 0001-3 20 (1 ) E

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves 1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY

BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY CATALOGUE 2012 - PART 4 CHEMICAL BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY PLUG VALVES SLEEVED PLUG VALVES FULLY LINED

More information

ProPress 304 Stainless. ProPress 304 Stainless

ProPress 304 Stainless. ProPress 304 Stainless ProPress 304 Stainless ProPress 304 Stainless ProPress Stainless 304 ProPress Stainless is the total system solution where optimum corrosion protection or chemical resistance is required. All fittings

More information

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04 BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and

More information

MECHANICAL CONTRACTORS ASSOCIATION OF AMERICA, INC. BASIC ASSUMPTIONS

MECHANICAL CONTRACTORS ASSOCIATION OF AMERICA, INC. BASIC ASSUMPTIONS A labor unit for purposes of this website, is expressed in terms of manhours to install a unit of material (such as a foot of pipe), an individual item (such as a fitting or valve), or perform a specific

More information

HYDRONIC PIPING SPECIALTIES AND PIPING GUIDELINES

HYDRONIC PIPING SPECIALTIES AND PIPING GUIDELINES HYDRONIC PIPING SPECIALTIES AND PIPING GUIDELINES GENERAL INFORMATION 1.1 This section applies to piping systems specialties for hot water heating, chilled water cooling, condenser water, make-up water

More information

DESIGN STANDARDS SECTION

DESIGN STANDARDS SECTION PART 1 - GENERAL 1.01 Provide floor cleanouts on main waste piping installed above finished spaces at all levels to facilitate maintenance. This requirement is in addition to code required cleanouts. 1.02

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,

More information

Stainless Steel Pipe & Tubing

Stainless Steel Pipe & Tubing CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 FAX (323) 890-4456 WWW.SMITHCOOPER.COM Stainless Steel Pipe & Tubing Stainless Pipe 304/304L & 316/316L Stainless Steel Pipe Wall Thickness and

More information

PLASTIC PIPE, FITTINGS, VALVES & SOLVENT CEMENTS

PLASTIC PIPE, FITTINGS, VALVES & SOLVENT CEMENTS PLASTIC PIPE, FITTINGS, VALVES & SOLVENT CEMENTS 1 Valves for All Applications Ball Valves & 3-Way Ball Valves - PVC & CPVC True Union 2000-1/2" - 8" Compact 1/2" - 6" (PVC & CPVC) Single Entry 1/2" -

More information

FLANGED FITTINGS OUR KNOWLEDGE SETS US APART

FLANGED FITTINGS OUR KNOWLEDGE SETS US APART OUR KNOWLEDGE SETS US APART Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts & Bolts TABLE OF CONTENTS Flange Details - Class 125............................................2 Designation

More information

THIS PAGE INTENTIONALLY LEFT BLANK

THIS PAGE INTENTIONALLY LEFT BLANK (713) 690-0040 THIS PAGE INTENTIONALLY LEFT BLANK ORIFICE FLANGES In Carbon, Alloy and Stainless 300lb. through 2500 lb. or Ring Joint ORIFICE FLANGES are widely used in conjunction with orifice meters

More information

Standard Bills of Materials Commonly Ordered Models Only

Standard Bills of Materials Commonly Ordered Models Only Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter

More information

Item No. Name of Part Item No. Name of Part Item No. Name of Part

Item No. Name of Part Item No. Name of Part Item No. Name of Part www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover

More information

Galvanized Pipe. Standard pipe is 16 gauge galvanized construction. Standard lengths are five feet and 20 feet. Heavier gauges are also available.

Galvanized Pipe. Standard pipe is 16 gauge galvanized construction. Standard lengths are five feet and 20 feet. Heavier gauges are also available. Galvanized Pipe Standard pipe is 16 gauge galvanized construction. Standard lengths are five feet and 20 feet. Heavier gauges are also available. Angle rings are needed to secure connections. See pages

More information

5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector galvznized steel bolt w/ washers and nut. Anchor 3" sq. 7 Ga.

5/16 Flange nut. Bolt Keeper Plate (8 Sq. SYS.) (3) 1/2 x 3 Hex head connector galvznized steel bolt w/ washers and nut. Anchor 3 sq. 7 Ga. 2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector galvznized

More information

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS 8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263

More information

Worldwide Contacts.

Worldwide Contacts. Worldwide Contacts www.tyco-fire.com Worldwide Contacts www.tyco-fire.com Model AV--00 Alarm Valve (DN to DN00) With and Without Model RC- Retard Chamber European Conformity Valve Trim General Description

More information

1.3.3 When pipe is required for close coiling, this should b specified on the order.

1.3.3 When pipe is required for close coiling, this should b specified on the order. SA 36* SA 53* Covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded contrsuction of bidges and buildings, and for general structural purposes. When the

More information

Technical Manual. Register 18 Contents - T4E

Technical Manual. Register 18 Contents - T4E Page: 1 Contents Register 18 Contents - T4E Page Technical Data T4E-1, DN½ to DN6...2 Technical Data T4E-1, DN8 to DN12...3 Technical Data T4E-2, DN15 to DN150...4 Technical Data T4E-2, DN200 to DN300...5

More information