The definition of a new standard for conventional lathes had to be perfect - therefore, we complemented the Servoturn with the following features::

Transcription

1 The definition of a new standard for conventional lathes had to be perfect - therefore, we complemented the Servoturn with the following features:: Mineral-Casting Machine Frame mineral-casting reduces vibration 6 times faster than castiron (GG25) and up to 10 times faster than steel- this ensures excellent surface quality that could not be achieved with conventional machines excellent thermal stability modern manufacturing process with excellent energy footprint intuitive operation Linear Profile Guide Rails maximum reliability and performance excellent rigidity, strength and accuracy is achieved by optimum load distribution, designed for accepting high loads and torques no stick-slip effect long life and minimum maintenance replaceable parts Recirculating Ball Screw considerably less errors due to loseness (backlash), resulting in significantly higher precision significantly reduced friction no stick-slip effect reduced heat development less wear for even less maintenance requirements Servo drive technology including "Teach-in" buttons that allow setting a limit stop at the current position Options 3-jaw chuck, Ø 8 in, Camlock 1-6, 4000 rpm jaw chuck, Ø 8 in, Camlock 1-6, 4000 rpm quick-change tool holder set WB plus assembly oscillating elements LT 33 (per piece) accessory set, MT 4 (8 pieces) For additional options for this machine, visit our website and search for Servoturn 410 (product search) Standard Equipment: 3-axis position indicator, quick-action tool changer with 1 cartridge, coolant system, splatter guard, support shield, work lamp, operator manual Specifications Servoturn 410 Working area center width mm 1100 turning diameter - over bed (max) mm over support (max) mm 250 X axis travel mm 225 Z axis travel mm 960 bed width mm 300 Headstock spindle speed min spindle speed (forward) min spindle speed (reverse) min spindle bore mm 52 spindle mount D1-6 spindle taper MK 6 Feed X / Z axis feed mm/u 0, For the latest specials, visit Thread Cutting thread cutting, metric mm (24) 0,2-14 thread cutting, Whitworth GPZ (24) 4-48 tailstock tailstock quill diam. mm 50 tailstock taper MK 4 tailstock quill stroke mm 120 Drive Capacities headstock motor rating kw 5,5 motor rating X axis kw 1 motor rating Z axis kw 1,5 power supply V 400 Dimensions/Weight overall dimensions (LxWxH) mm 2250 x 1260 x 1250 weight kg 2500 with position indicator

2 Lathe Servoturn 410 Conventional Precision Lathe with servo drive - easy to operate, more reliable, more precise, for higher loads and reduced maintenance mineral-casting preloaded ball screws electronic hand-wheels axes are driven by servomotor linear guide V const D Turning Intuitive operation as we know it from conventional machines - only much better: feed and thread leads can be selected via rotary switch - what a brilliant concept stops can be set electronically with the press of a button feeds are infinitely variable between 50 and 100% via override potentiometer - finally available on a conventional lathe micro-control via electronic hand-wheels - but handling and postioning just as with a conventional machine axes are powered by high-quality servo drives that translate your hand movements with the precision and dynamics of modern CNC machines infinitely variable speed adjustment and constant cutting speed of headstock linear profi le rail guides on Z and X For more information and options, visit 9

3 servo-motor and preloaded ball screw cutter head swivels ± 90 - manual quill feed for angular bores control panel with integrated X.pos Plus Position Indicator Proven Milling Machine with innovative operating concept and new feed technology Your Advantages: Easy to use: intuitive operation - practical layout of control elements and streamlined function automatic feed on all axes and infinitely variable rapid feed with speeds up to 5000 mm/min set limit stops on any axis with the push of a button - 3 stop positions per axis can be stored More precise: operated via electronic hand-wheels - axes are powered by high-quality servo drives that translate your hand movements with the precision and dynamics of modern CNC machines More reliable: drives, spindles, and measuring systems are totally enclosed or mounted in protective enclosures and virtually maintenance-free Electronics - made in Germany More capacity: this machine only uses premium drive components that are designed for continuous operation Maintenance-free: no regular maintenance needed for the entire feed drive Standard Equipment: 3-axis position indicator, electronic hand-wheels, pneumatic workpiece clamping, chip collector tray, LED work lamp, coolant system, central lubrication (manually operated), horizontal guideway cover, operating tools, operator manual Options oscillation element LK 55 (per unit) hydraulic vise HS divider ST milling chuck set ISO clamping tools, assorted De Luxe 16 / M Specifications Servomill Working area X axis travel mm 680 Y axis travel mm 365 Z axis travel mm 370 table setup area mm 1370 x 300 table load capacity (max.) kg 350 Feed feed speed (infinitely variable) mm/min feed per spindle revolution mm/u rapid feed X axis mm/min 5000 rapid feed Y axis mm/min 3000 rapid feed Z axis mm/min 2000 Vertical Cutter Head speed range (infinitely variable, rpm back gear ranges) spindle mount ISO 40 quill stroke mm 125 Drive Capacities main motor rating kw 3.7 power supply V 400 Dimensions / Weight dimensions mm 2540 x 2156 x 2235 weight kg For more information and options, visit

4 Multipurpose Milling Machine Servomill preloaded ball screw electronic hand-wheels D Milling Conventional Multipurpose Milling Machine for workshop applications, single parts production and training purposes Preloaded ball screws on all axes: - less errors due to backlash - increased precision - reduced heat accumulation - less wear Rigid machine base: - doveteail guide on X axis - all guides are hardened and ground - wide square guides on Y and Z Universal cutter head: - pneumatic tool clamping - powerful 3.7 kw motor - LED speed indicator - manual coarse feed for quill For more information and options, visit - quill with micrometer depth stop - infinitely variable spindle speed including back gear - spindle brake 11

5 HydroJet Eco 2040 is shown Standard Equipment: CNC control GPlus 450 Cut, TFT monitor, electronic hand-wheel, control panel, GPlus 450 Cut Software, grid nesting, high-pressure pump Ecotron 40.37, proportional valve, check valve, high-pressure filter at cutter head, abrasive cutter head, abrasives container 1000 kg, abrasives conveyor system, operating manual and programming instructions Options oil / air cooler for Ecotron pump enclosure for Ecotron and laser pointer collision guard for Z axis software option for contour nesting starter kit light curtains on 2 sides light curtains on 3 sides light curtains on 4 sides vacuum system for abrasive-mud removal 4 m 2 (Eco 1313) vacuum system for abrasive-mud removal 6 m (Eco ) vacuum system for abrasive-mud removal 8 m 2 (Eco 2040) ECOTRON High-Pressure Pump standard pumps for Hydro-Jet Eco maximum power and reliability for pure-water and abrasive cutting operations superior operation safety and ease of maintenance hydraulic drive with axial-piston pump oil/water heat-exchanger for oil cooling system pressure booster, complete with high-pressure tubing pulsation damper with pressure accumulator relief valve integrated in the high-pressure circuit Shown with optional pump housing Specifications for High-Pressure System Ecotron main motor rating kw 37 fl ow rate (max.) l/min 3.8 max. operating overpressure bar 4000 continuous operating pressure (max.) bar 3800 stroke speed rpm 35 gear ratio 1:21,78 oil tank capacity Liter 130 ambient temperature for oil/air cooler required air pressure kg/sec For the latest specials, visit ambient temperature for oil/water cooler water infeed 0.5 water pressure, with booster pump bar 1-3 waste water connection 3/8 high pressure connection, 3/8" & 9/16" HP pipe M30x2 air supply bar compressed air connection for tube (OD) mm 6 required power connection A 125 width x depth x height mm 1800x 850x955 weight kg 950

6 Water-Jet Cutting Systems Hydro-Jet Eco Rigid Water-Jet Cutting System with small footprint and maximum operator comfort high-pressure system up to 3800 bar completely equipped for Abrasive & Pure-Water Cutting axes are driven via preloaded ball screws Flying Bridge design work area is open on three sides for comfortable loading mechanical feed on Z axis separately set up abrasives container with 1000 kg fill capacity B Cutting Eroding HydroJet Eco 1525 is shown Specifications Hydro-Jet Eco 1313 Eco 1525 Eco 1530 Eco 2040 cutting capacity mm 1300 x x x x 2000 Z axis travel mm operating pressure bar flow rate l/min 3,8 3,8 3,8 3,8 max. table load capacity kg/m rapid feed mm/min positioning accuracy mm ± 0,1 ± 0,1 ± 0,1 ± 0,1 repeatability mm ± 0,05 ± 0,05 ± 0,05 ± 0,05 overall dimensions (L x W x H) mm 2900 x 2800 x x 3700 x x 4200 x x 5200 x 2000 weight (without water) kg weight with water kg fill capacity of sand container (max) kg max. sand feed gram/min For more information, please visit 27