High Efficiency LED in Ø 3 mm Tinted Diffused Package
|
|
- Anissa Walters
- 7 years ago
- Views:
Transcription
1 TLHR44., TLHO44., TLHY44., TLHG44. High Efficiency LED in Ø 3 mm Tinted Diffused Package DESCRIPTION 922 The TLH.44.. series was developed for standard applications like general indicating and lighting purposes. It is housed in a 3 mm tinted diffused plastic package. The wide viewing angle of these devices provides a high on-off contrast. Several selection types with different luminous intensities are offered. All LEDs are categorized in luminous intensity groups. The green and yellow LEDs are categorized additionally in wavelength groups. That allows users to assemble LEDs with uniform appearance. FEATURES Standard Ø 3 mm (T-) package Small mechanical tolerances Suitable for DC and high peak current Wide viewing angle Luminous intensity categorized Yellow and green color categorized Material categorization: for definitions of compliance please see APPLICATIONS Status lights Off/ on indicator Background illumination Readout lights Maintenance lights Legend light PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 3 mm Product series: standard Angle of half intensity: ± 3 PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE (mcd) at I F (nm) at I F (V) at I F MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. TECHNOLOGY TLHR44 Red GaAsP on GaP TLHR44-AS2 Red GaAsP on GaP TLHR44-AS2 Red GaAsP on GaP TLHR44-AS2Z Red GaAsP on GaP TLHR44-AS2Z Red GaAsP on GaP TLHR44-MS2 Red GaAsP on GaP TLHR44-MS2Z Red GaAsP on GaP TLHR44 Red GaAsP on GaP TLHR44-AS2Z Red GaAsP on GaP TLHR445 Red GaAsP on GaP TLHR445-AS2 Red GaAsP on GaP TLHR447 Red GaAsP on GaP TLHR447-MS2Z Red GaAsP on GaP TLHO44 Soft orange GaAsP on GaP TLHO44-AS2Z Soft orange GaAsP on GaP TLHO44-MS2Z Soft orange GaAsP on GaP TLHY44 Yellow GaAsP on GaP TLHY44-AS2Z Yellow GaAsP on GaP TLHY44-MS2 Yellow GaAsP on GaP Rev. 3., 24-Mar-5 Document Number: 836 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
2 TLHR44., TLHO44., TLHY44., TLHG44. PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE (mcd) at I F (nm) at I F (V) at I F MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. TECHNOLOGY TLHY44 Yellow GaAsP on GaP TLHY44-AS2Z Yellow GaAsP on GaP TLHY445 Yellow GaAsP on GaP TLHY445-AS2 Yellow GaAsP on GaP TLHY445-BT2Z Yellow GaAsP on GaP TLHY445-MS2 Yellow GaAsP on GaP TLHY4438 Yellow GaAsP on GaP TLHG44 Green GaP on GaP TLHG44-MS2 Green GaP on GaP TLHG44 Green GaP on GaP TLHG445 Green GaP on GaP ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) TLHR44., TLHO44., TLHY44., TLHG44., TLHP44. PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage V R 6 V DC forward current I F 3 ma Surge forward current t p μs I FSM A Power dissipation T amb 6 C P V mw Junction temperature T j C Operating temperature range T amb -4 to + C Storage temperature range T stg -55 to + C Soldering temperature t 5 s, 2 mm from body T sd 26 C Thermal resistance junction/ambient R thja 4 K/W OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHR44., RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TLHR44 I V mcd Luminous intensity () I F = ma TLHR44 I V mcd TLHR445 I V mcd TLHR447 I V mcd Dominant wavelength I F = ma λ d nm Peak wavelength I F = ma λ p nm Angle of half intensity I F = ma ϕ - ± 3 - deg Forward voltage I F = 2 ma V F V Reverse voltage I R = μa V R V Junction capacitance V R = V, f = MHz C j pf () In one packing unit I Vmin. /I Vmax..5 Rev. 3., 24-Mar-5 2 Document Number: 836 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
3 TLHR44., TLHO44., TLHY44., TLHG44. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHO44., SOFT ORANGE PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () I F = ma TLHO44 I V mcd Dominant wavelength I F = ma λ d nm Peak wavelength I F = ma λ p nm Angle of half intensity I F = ma ϕ - ± 3 - deg Forward voltage I F = 2 ma V F V Reverse voltage I R = μa V R V Junction capacitance V R = V, f = MHz C j pf (2) In one packing unit I Vmin. /I Vmax..5 OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHY44., YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () () In one packing unit I Vmin. /I Vmax..5 I F = ma TLHY44 I V.6 - mcd TLHY44 I V mcd TLHY445 I V mcd TLHY4438 I V mcd TLHY44 λ d nm Dominant wavelength I F = ma TLHY44 λ d nm TLHY445 λ d nm TLHY4438 λ d nm Peak wavelength I F = ma λ p nm Angle of half intensity I F = ma ϕ - ± 3 - deg Forward voltage I F = 2 ma V F V Reverse voltage I R = μa V R V Junction capacitance V R = V, f = MHz C j pf OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLHG44., GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TLHG44 I V mcd Luminous intensity () I F = ma TLHG44 I V mcd TLHG445 I V mcd Dominant wavelength I F = ma λ d nm Peak wavelength I F = ma λ p nm Angle of half intensity I F = ma ϕ - ± 3 - deg Forward voltage I F = 2 ma V F V Reverse voltage I R = μa V R V Junction capacitance V R = V, f = MHz C j pf () In one packing unit I Vmin. /I Vmax..5 Rev. 3., 24-Mar-5 3 Document Number: 836 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
4 TLHR44., TLHO44., TLHY44., TLHG44. LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. MAX. L 2 M N P 4 8 Q R 2 S 6 32 T 25 5 U 4 8 Luminous intensity is tested at a current pulse duration of 25 ms. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one bag. In order to ensure availability, single wavelength groups will not be orderable. COLOR CLASSIFICATION DOM. WAVELENGTH (nm) GROUP YELLOW GREEN MIN. MAX. MIN. MAX Wavelengths are tested at a current pulse duration of 25 ms. TYPICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) 6 I F - Forward Current t p /T=..5.2 T amb 65 C T amb - Ambient Temperature ( C) t p - Pulse Length (ms) Fig. - Forward Current vs. Ambient Temperature Fig. 2 - Forward Current vs. Pulse Length Rev. 3., 24-Mar-5 4 Document Number: 836 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
5 TLHR44., TLHO44., TLHY44., TLHG red I F t p /T Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Fig. 6 - Relative Luminous Intensity vs. Forward Current/Duty Cycle red t p /T =. t p = µs V F - Forward Voltage (V) red Fig. 4 - Forward Current vs. Forward Voltage Fig. 7 - Relative Luminous Intensity vs. Forward Current red I F = ma T amb - Ambient Temperature ( C) red λ - Wavelength (nm) 69 Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature Fig. 8 - Relative Intensity vs. Wavelength Rev. 3., 24-Mar-5 5 Document Number: 836 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
6 TLHR44., TLHO44., TLHY44., TLHG44. soft orange I v rel - Relative Luminous Intensity. soft orange V F - Forward Voltage (V) Fig. 9 - Forward Current vs. Forward Voltage Fig. 2 - Relative Luminous Intensity vs. Forward Current I V rel - Relative Luminous Intensity soft orange I rel - Relative Intensity soft orange T amb - Ambient Temperature ( C) λ - Wavelength (nm) 67 Fig. - Relative Luminous Intensity vs. Ambient Temperature Fig. 3 - Relative Intensity vs. Wavelength I spec - Specific Luminous Intensity soft orange yellow t p /T =. t p = µs I F t p /T 95 3 V F - Forward Voltage (V) Fig. - Relative Luminous Intensity vs. Forward Current/Duty Cycle Fig. 4 - Forward Current vs. Forward Voltage Rev. 3., 24-Mar-5 6 Document Number: 836 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
7 TLHR44., TLHO44., TLHY44., TLHG yellow I F = ma T amb - Ambient Temperature ( C) I rel - Relative Intensity yellow λ - Wavelength (nm) 65 Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature Fig. 8 - Relative Intensity vs. Wavelength I spec - Specific Luminous Intensity yellow I F t p /T. green t p /T =. t p = µs V F - Forward Voltage (V) 8 Fig. 6 - Relative Luminous Intensity vs. Forward Current/Duty Cycle Fig. 9 - Forward Current vs. Forward Voltage yellow green I F = ma T amb - Ambient Temperature ( C) Fig. 7 - Relative Luminous Intensity vs. Forward Current Fig. 2 - Relative Luminous Intensity vs. Ambient Temperature Rev. 3., 24-Mar-5 7 Document Number: 836 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
8 TLHR44., TLHO44., TLHY44., TLHG44. I spec - Specific Luminous Intensity green I F t p /T Fig. 2 - Specific Luminous Intensity vs. Forward Current. green Fig Relative Luminous Intensity vs. Forward Current.2. green I rel - Relative Intensity λ - Wavelength (nm) 62 Fig Relative Intensity vs. Wavelength Rev. 3., 24-Mar-5 8 Document Number: 836 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
9 TLHR44., TLHO44., TLHY44., TLHG44. PACKAGE DIMENSIONS in millimeters A C Ø 3.2 ±.5 R.4 (sphere) 34.4 ± ±.3 < ± ±.5 (2.5) AREA NOT PLANE Ø 2.9 ± nom..5 ± technical drawings according to DIN specifications Drawing-No.: Issue: 9; REEL DIMENSIONS in millimeters TAPE max. 9 Adhesive tape Identification label Reel Diodes: anode before cathode Phototransistors: emitter before collector Code 2 3 Paper Diodes: cathode before anode Phototransistors: collector before emitter Code 2 Identification label: Vishay/type/group/tape code/production code/quantity Tape Fig Reel Fig LED in Tape Rev. 3., 24-Mar-5 9 Document Number: 836 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
10 TLHR44., TLHO44., TLHY44., TLHG44. AMMOPACK (ending: Z) Tape feed direction Diodes: cathode before anode Transistors: collector before emitter Label Tape feed direction Diodes: anode before cathode Transistors: emitter before collector Fig Tape Direction The new nomenclature for ammopack is e.g. ASZ only, without suffix for the LED orientation. The carton box has to be turned to the desired position: + for anode first, or - for cathode first. AS2Z and AS2Z are still valid for already existing types, BUT NOT FOR NEW DESIGN. TAPE DIMENSIONS in millimeters ± 2.7 ± ± ±.3 9 ±.5.3 ±.2 X H Ø 4 ± ± max. 5.8 ± ± ±.7 Measure limit over 2 index-holes: ± 2885 Quantity per: Reel (Mat.-no. 764) 2 OPTION DIMENSION H ±.5 mm DIMENSION X ±.5 mm AS MS CS BT Rev. 3., 24-Mar-5 Document Number: 836 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
11 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 3-Jun-6 Document Number: 9
High Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Power Infrared Emitting Diode, 94 nm, GaAlAs, MQW DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed molded
More informationAmbient Light Sensor
TEPT56 Ambient Light Sensor DESCRIPTION 94 839 TEPT56 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a T-1¾ package. It is sensitive to visible light much like the human eye
More informationUltrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor DESCRIPTION 7 is a silicon NPN phototransistor with high radiant sensitivity in black, T-1¾ plastic package with base terminal and daylight blocking filter. Filter bandwidth
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.
More informationHigh Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL51 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 96 1155 TSAL51 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power, molded in a blue-gray plastic
More informationSilicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
More informationStandard 0603 SMD LED
TLMS, TLMO, TLMY, TLMG, TLMP, TLMB Standard 63 SMD LED DESCRIPTION 8562 The new 63 LED series have been designed in the smallest SMD package. This innovative 63 LED technology opens the way to smaller
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationHigh Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero
TSFF55 High Speed Infrared Emitting Diode, 87 nm, GaAlAs Double Hetero 26 DESCRIPTION TSFF55 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More informationReflective Optical Sensor with Transistor Output
www.vishay.com TCRT, TCRT Reflective Optical Sensor with Transistor Output 2836 TCRT A C E C TCRT 955_ FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 7 x 4 x
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
More informationReflective Optical Sensor with Transistor Output
TCRT5000, TCRT5000L Reflective Optical Sensor with Transistor Output FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 10.2 x 5.8 x 7 Peak operating distance: 2.5
More informationIR Receiver Module for Light Barrier Systems
Not for New Design - Alternative Available: New TSSP4038 (#82458) www.vishay.com IR Receiver Module for Light Barrier Systems TSOP4038 2 3 MECHANICAL DATA Pinning: = OUT, 2 = GND., 3 = V S 6672 FEATURES
More informationUV SMD LED PLCC-2 FEATURES APPLICATIONS. at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
UV SMD LED PLCC-2 VLMU31 19225 DESCRIPTION The package of the VLMU31-series is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled
More informationOptocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationOptocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
More informationOptocoupler, Phototransistor Output, AC Input
Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have
More informationStandard SMD LED PLCC-2
Standard SMD LED PLCC-2 DESCRIPTION 948553 This device has been designed for applications requiring narrow brightness and color selection. The package of this device is the PLCC-2. It consists of a lead
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ040-M3 Cathode Anode PRODUCT SUMMARY Package SMB I F(AV) 1.0 A V R 40 V V F at I F 0.38 V I RM 9 ma at 125 C T J max. 150 C Diode variation Single die E AS 3.0 mj FEATURES
More informationHigh Performance Schottky Rectifier, 1.0 A
High Performance Schottky Rectifier, 1. A VS-BQ3-M3 Cathode Anode SMB PRODUCT SUMMARY Package SMB I F(AV) 1. A V R 3 V V F at I F.42 V I RM max. 15 ma at 125 C T J max. 15 C Diode variation Single die
More informationPower SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
More informationHigh Performance Schottky Rectifier, 3.0 A
High Performance Schottky Rectifier, 3. A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3. A V R 4 V V F at I F.46 V I RM 3 ma at 25 C T J max. 5 C Diode variation Single die E AS 6. mj FEATURES
More informationHigh Intensity SMD LED High Intensity SMD LED
High Intensity SMD LED High Intensity SMD LED TLME31 Color Type Technology Angle of Half Intensity ± Yellow TLME31 AlInGaP on GaAs 6 Description This device has been designed to meet the increasing demand
More informationIR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications
IR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications MECHANICAL DATA Pinning: = OUT, 2 = GND, 3 = V S 2 3 6672 APPLICATIONS Reflective sensors for hand dryers, towel or
More informationOptocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
More informationOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
More informationHigh Performance Schottky Rectifier, 1 A
High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ060PbF Vishay High Power Products FEATURES Small foot print, surface mountable Low forward voltage drop SMB Cathode Anode High frequency operation Guard ring for enhanced
More informationReflective Optical Sensor with Transistor Output
Reflective Optical Sensor with Transistor Output CNY7 Description The CNY7 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package which blocks visible light. E
More informationDome Lens SMD LED FEATURES APPLICATIONS. WAVELENGTH (nm)
Dome Lens SMD LED VLD.1235R... DESCRIPTION VLD.1235G... The dome lens SMD LED series has been designed in a small untinted and clear molded package with lens for surface mounting as gullwing or reverse
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation
More information1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
More informationPhotovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay
Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay i7966_6 Turn Off FEATURES Open circuit voltage at I F = ma, 8. V typical Short circuit current at I F = ma, 5 μa typical Isolation
More informationAluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
More informationOptocoupler, Phototransistor Output, with Base Connection
4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationSchottky Rectifier, 100 A
Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES
More informationStandard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A
Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single
More information1 Form A Solid State Relay
1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays
More informationAluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
More informationAluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
More informationAluminum Electrolytic Capacitors Power Eurodin Printed Wiring
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to
More informationStandard SMD LED PLCC-2
Standard SMD LED PLCC-2 19225 DESCRIPTION This device has been designed to meet the increasing demand for white SMD LED. The package of the VLMW41.. is the PLCC-2. It consists of a lead frame which is
More information1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.
TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationMedium power Schottky barrier single diode
Rev. 03 17 October 2008 Product data sheet 1. Product profile 1.1 General description Planar medium power Schottky barrier single diode with an integrated guard ring for stress protection, encapsulated
More informationSchottky Rectifier, 1 A
Schottky Rectifier, 1 A BQPbF FEATURES SMB Cathode Anode Small foot print, surface mountable Low forward voltage drop High frequency operation Available RoHS* COMPLIANT Guard ring for enhanced ruggedness
More informationPreamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control 22906 FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal AC coupled response from 20 khz to 60 khz; all
More informationGaAs/GaAlAs IR Emitting Diodes in ø 5 mm Package
GaAs/GaAlAs IR Emitting Diodes in ø 5 mm Package Description TSIL64 is a high efficiency infrared emitting diode in GaAlAs on GaAs technology, molded in clear, bluegrey tinted plastic packages. In comparison
More informationOptocoupler, Phototransistor Output, with Base Connection
CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance
More informationIR Receiver Modules for Remote Control Systems
IR Receiver Modules for Remote Control Systems FEATURES Very low supply current Photo detector and preamplifier in one package Internal filter for PCM frequency Supply voltage: 2.5 V to 5.5 V Improved
More informationSchottky barrier quadruple diode
Rev. 3 8 October 2012 Product data sheet 1. Product profile 1.1 General description with an integrated guard ring for stress protection. Two electrically isolated dual Schottky barrier diodes series, encapsulated
More informationSMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
More informationOptocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package
Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon
More informationPMEG1020EA. 1. Product profile. 2 A ultra low V F MEGA Schottky barrier rectifier. 1.1 General description. 1.2 Features. 1.
Rev. 04 30 December 2008 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifier with an integrated guard ring for
More informationPMEG3005EB; PMEG3005EL
Rev. 0 29 November 2006 Product data sheet. Product profile. General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated guard ring for stress
More informationHigh-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC
Rev. 8 18 November 2010 Product data sheet 1. Product profile 1.1 General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table 1. Product overview Type number Package
More informationMetal Film Resistors, Pulse Withstanding Protective
End of Life - August 213 www.vishay.com Metal Film Resistors, Pulse Withstanding Protective STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL POWER RATING P 7 C W FEATURES Special design provides lightning
More informationElectrical Double Layer Energy Storage Capacitors Power and Energy Versions
Electrical Double Layer Energy Storage Capacitors Power and Energy Versions FEATURES Polarized energy storage capacitor with high capacity and energy density Energy version with high stability available
More informationAluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More informationStandard Recovery Diodes, (Stud Version), 40 A
Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-203AB (DO-5) PRODUCT SUMMARY I F(A) 40 A Package
More informationPMEG2020EH; PMEG2020EJ
Rev. 04 15 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated guard ring for
More informationPMEG3015EH; PMEG3015EJ
Rev. 03 13 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated guard ring for
More informationPower MOSFET. IRF510PbF SiHF510-E3 IRF510 SiHF510. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) () = 0.54 Q g max. (nc) 8.3 Q gs (nc) 2.3 Q gd (nc) 3.8 Configuration Single D TO220AB G FEATURES Dynamic dv/dt rating Available Repetitive avalanche rated
More informationMetal Film Resistors, Industrial, Flameproof
End of Life - August 13 Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS FEATURES Small physical size Low cost resistors have the ability to withstand overloads up to times
More informationPower MOSFET FEATURES. IRFZ44PbF SiHFZ44-E3 IRFZ44 SiHFZ44 T C = 25 C
Power MOSFET PRODUCT SUMMARY (V) 60 R DS(on) (Ω) V GS = 10 V 0.028 Q g (Max.) (nc) 67 Q gs (nc) 18 Q gd (nc) 25 Configuration Single FEATURES Dynamic dv/dt Rating 175 C Operating Temperature Fast Switching
More informationIR Receiver Modules for Remote Control Systems
IR Receiver Modules for Remote Control Systems 1 2 MECHNICAL DATA Pinning for TSOP44.., TSOP48..: 1 = OUT, 2 = GND, 3 = V S Pinning for TSOP22.., TSOP24..: 1 = OUT, 2 = V S, 3 = GND 3 16672 FEATURES Improved
More informationPower MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 00 R DS(on) ( ) = 1.5 Q g (Max.) (nc) 8. Q gs (nc) 1.8 Q gd (nc) 4.5 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of
More information2.5 A Output Current IGBT and MOSFET Driver
VO. A Output Current IGBT and MOSFET Driver 9 DESCRIPTION NC A C NC _ The VO consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for
More informationBAT54 series SOT23 Schottky barrier diodes Rev. 5 5 October 2012 Product data sheet 1. Product profile 1.1 General description
SOT2 Rev. 5 5 October 2012 Product data sheet 1. Product profile 1.1 General description Planar with an integrated guard ring for stress protection, encapsulated in a small SOT2 (TO-26AB) Surface-Mounted
More information45 V, 100 ma NPN/PNP general-purpose transistor
Rev. 4 18 February 29 Product data sheet 1. Product profile 1.1 General description NPN/PNP general-purpose transistor pair in a very small SOT363 (SC-88) Surface-Mounted Device (SMD) plastic package.
More informationSURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
More informationPower MOSFET FEATURES. IRL540PbF SiHL540-E3 IRL540 SiHL540
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) (Ω) = 5.0 V 0.077 Q g (Max.) (nc) 64 Q gs (nc) 9.4 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC
4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC
More information65 V, 100 ma PNP/PNP general-purpose transistor
Rev. 02 19 February 2009 Product data sheet 1. Product profile 1.1 General description PNP/PNP general-purpose transistor pair in a very small SOT363 (SC-88) Surface-Mounted Device (SMD) plastic package.
More informationBZW50. Transil, transient voltage surge suppressor (TVS) Features. Description
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types
More informationPower MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of
More informationAC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
More informationIR Receiver Modules for Remote Control Systems
IR Receiver Modules for Remote Control Systems FEATURES Very low supply current Photo detector and preamplifier in one package Internal filter for PCM frequency Supply voltage: 2.5 V to 5.5 V Improved
More informationLow forward voltage High breakdown voltage Guard-ring protected Hermetically sealed glass SMD package
Rev. 6 10 September 2010 Product data sheet 1. Product profile 1.1 General description Planar with an integrated guard ring for stress protection, encapsulated in a small hermetically sealed glass SOD80C
More informationSMD PTC - Nickel Thin Film Linear Thermistors
SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage
More informationStandard Recovery Diodes (Hockey PUK), 2100 A
Standard Recovery Diodes (Hockey PUK), 2 A VS-SD10C..K Series DO-200AC (K-PUK) PRODUCT SUMMARY I F(AV) 2 A Package DO-200AC (K-PUK) Circuit configuration Single diode FEATURES Wide current range High voltage
More informationOptocoupler, Phototransistor Output, with Base Connection
HA/HA2/HA3/HA4/HA5 FEATURES Interfaces with common logic families Input-output coupling capacitance < pf Industry standard dual-in line 6-pin package A C NC 2 3 6 5 4 B C E Isolation test voltage: 5300
More informationTransmissive Optical Sensor with Phototransistor Output
TCST11. up to TCST23. Transmissive Optical Sensor with Phototransistor Output Description This device has a compact construction where the emitting-light sources and the detectors are located face-to-face
More informationP-Channel 1.25-W, 1.8-V (G-S) MOSFET
Si5DS P-Channel.5-W,.-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).5 at V GS = -.5 V ±.5 -.7 at V GS = -.5 V ±. at V GS = -. V ± FEATURES Halogen-free According to IEC 9-- Available TrenchFET
More informationBPW34. Silicon PIN Photodiode VISHAY. Vishay Semiconductors
Silicon PIN Photodiode Description The is a high speed and high sensitive PIN photodiode in a miniature flat plastic package. Its top view construction makes it ideal as a low cost replacement of TO-5
More informationP-Channel 20 V (D-S) MOSFET
Si30CDS P-Channel 0 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 0 0. at V GS = - 4.5 V - 3. 0.4 at V GS = -.5 V -.7 3.3 nc TO-36 (SOT-3) FEATURES Halogen-free According
More informationKnob Potentiometer FEATURES. P16NP P16NM Panel Cutout. Thickness nut 2 mm washer 1.5 mm. Panel sealing ring 12 wrench Thread M10 x 0.75 10.2 9.
Knob Potentiometer P6, PA6 FEATURES Test according to CECC 4000 or IEC 60393- P6 - Version for professional and industrial applications (cermet) W at 40 C PA6 - Version for professional audio applications
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760
More information40 V, 200 ma NPN switching transistor
Rev. 01 21 July 2009 Product data sheet BOTTOM VIEW 1. Product profile 1.1 General description NPN single switching transistor in a SOT883 (SC-101) leadless ultra small Surface-Mounted Device (SMD) plastic
More informationULN2801A, ULN2802A, ULN2803A, ULN2804A
ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral
More informationDDSL01. Secondary protection for DSL lines. Features. Description
Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description
More information