Cree PLCC4 1 in 1 SMD LED CLA1A-WKW/MKW

Transcription

1 Cree PLCC4 1 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT PRODUCT DESCRIPTION SMD LEDs is packaged in the industr standard package. These LEDs have high reliabilit performance and are designed to work under a wide range of environmental conditions. This high reliabilit feature makes them ideall suited to be used under illumination application conditions. Its wide viewing angle makes these LEDs ideall suited for channel letter, or general backlighting and illumination applications. The flat top emitting surface makes it eas for these LEDs to mate with light pipes. FEATURES Size (mm): Color Temperatures(K): Cool White : Min. (4600) / Tpical (5500) Warm White : Min. (2500) / Tpical (3200) Luminous Intensit (mcd) CLA1A-WKW:( ) CLA1A-MKW:( ) CRI Tpical CRI for Cool White is 72 Tpical CRI for Warm White is 80 Lead-Free RoHS Compliant APPLICATIONS Light Strip Channel Letter Copright 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc Silicon Drive Durham, NC USA Tel:

2 ABSOLUTE MAXIMUM RATINGS (T A = 25 C) Items Smbol Absolute Maimum Rating Unit Forward Current I F 35 ma Peak Forward Current Note I FP 100 ma Reverse Voltage V R 5 V Power Dissipation P D 147 mw Operation Temperature T opr -40 ~ +100 C Storage Temperature T stg -40 ~ +100 C Junction Temperature T J 110 C Junction/Ambient R THJA 350 C/W Junction/Solder Point R THJS 200 C/W Note: Pulse width 0.1 msec, dut 1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25 C) Characteristics Color Smbol Condition Unit Minimum Tpical Maimum Forward Voltage Cool/Warm V F I F = 30 ma V Reverse Current Cool/Warm I R V R = 5 V μa 10 Luminous Flu Cool Φ V I F = 30 ma mlm 7000 Warm Φ V I F = 30 ma mlm 6000 Luminous Intensit Cool I V I F = 30 ma mcd Chromaticit Coordinates Warm I V I F = 30 ma mcd Cool Warm I F = 30 ma I F = 30 ma I F = 30 ma I F = 30 ma

3 INTENSITY BIN LIMIT (I F = 30 ma) Cool White(CLA1A-WKW) Min.(mcd) Ma.(mcd) Xa Xb Ya Yb Warm White (CLA1A-MKW) Min.(mcd) Ma.(mcd) Wb Xa Xb Ya Tolerance of measurement of luminous intensit is ±10%. VF BIN LIMIT (I F = 30 ma) Cool White (CLA1A-WKW) Min.(V) Ma.(V) a b c d Warm White (CLA1A-MKW) Min.(V) Ma.(V) a b c d Tolerance of measurement of VF is ±0.05V. 3

4 COLOR BIN LIMIT (I F = 30 ma) Cool White Wa Wj Wt Wb Wk Wu W W W Wc Wm Wv Wd Wn Ww We Wp Wf Wq W W Wg Wr Wh Ws Tolerance of measurement of the color coordinates is ±

5 COLOR BIN LIMIT (I F = 30 ma) Warm White Ma Me Mj Mb Mf Mk M M M Mc Mg Mm Md Mh Mn Tolerance of measurement of the color coordinates is ±

6 CIE CHROMATICITY DIAGRAM M3 M2 Mm Mj Mg K M1 Mc Me Mk Mn K Wp Ws Wq Wm Wn Wj Ww Wt Wr Wu W3 W4 W5 9000K 8000K 7000K 6000K Wv Ma Md Mb 3500K 4000K Mf Mh 3000K 2700K 2500K W2 Wg Wk Wh We W1 Wf Wc Wd Wa Wb

7 ORDER CODE TABLE* Luminous Intensit (mcd) Color Kit Number Color Min. Ma. Cool White CLA1A-WKW-CXaYb W1,W2,W3,W4,W5 Cool White CLA1A-WKW-CXaYb W4,W5 Cool White CLA1A-WKW-CXbYb W4,W5 Luminous Intensit (mcd) Color Kit Number Color Min. Ma. Warm White CLA1A-MKW-CWbYa M1,M2,M3 Warm White CLA1A-MKW-CWbYa W5,M1 Warm White CLA1A-MKW-CWbYa M2,M3 Warm White CLA1A-MKW-CXaYa M2,M3 Warm White CLA1A-MKW-CXaYa W5,M1 Notes: 1. The above kit numbers represent order codes that include multiple intensit-bin and color-bin codes. Onl one intensit-bin code and one color-bin code will be shipped on each bulk. Single intensit-bin code and single color-bin codes will not be orderable. 2. Please refer to the Cree LED Lamp Reliabilit Test Standards document for reliabilit test conditions. 3. Please refer to the Cree LED Lamp Soldering & Handling document for information about how to use this LED product safel. 7

8 GRAPHS If (ma) Vf(V) FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. -50 Vr(V) (RELATIVE LUMINOUS INTENSITY) IF(mA) FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT (RELATIVE LUMINOUS INTENSITY) 100% 80% 60% 40% 20% 5000K K CCT 3700K K CCT 2600K K CCT FIG.3 REVERSE CURRENT VS. REVERSE VOLTAGE. -50 Ir(uA) 0% FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. WL(nm) IF(mA) 1.0 (RELATIVE LUMINOUS INTENSITY) 40 Rth j-s=200 C/W Rth j-a=350 C/W Ta( C) FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjma=110 C) FIG.6 FAR FIELD PATTERN Angle The above data are collected from statistical figures that do not necessaril correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. 8

9 MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentall sensitive, persistent biologicall toic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maimum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an eempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, Vision Advisor Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the ee. 9

10 KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified b ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the Cree LED Lamp Packaging Standard document for more information about shipping and packaging options. Cree LEDs are sold b order codes in combinations of bins called kits. Order codes are configured in the following manner: 10

11 PACKAGING The boes are not water resistant and the must be kept awa from water and moisture. The LEDs are packed in cardboard boes after packaging in normal or anti-electrostatic bags. Cardboard boes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Ma 2000 pcs per reel. H UMIC HECK w ww.vit apac.c om 11