Page 32939/6. Guard switch type XCS LF (metal) XCS LE (plastic)
|
|
- Clarence Underwood
- 7 years ago
- Views:
Transcription
1 Presentation Safety detection solutions 3 Safety switches with solenoid interlocking of the actuator With mushroom head pushbutton for escape release Page / Page / Plastic, type Safety switches with solenoid interlocking of the actuator 0 Page / Environment characteristics Guard switch type XCS LF (metal) (plastic) Conformity to standards Products EN/IEC 0--, EN/ISO 3-, EN/IEC 0, UL 0, CSA C- n Machine assemblies EN/IEC 00-, EN/ISO, PrEN/ISO 00 Product certifications UL (), CSA, TÜV (in process) Maximum safety level () PL=e, category conforming to EN/ISO 3- and SIL 3 conforming to EN/IEC 0 Reliability data (3) PFH d =.0 E - ; MTTF d =. years; SFF =.3% Protective treatment Standard version: TC Ambient air temperature For operation C For storage C Vibration resistance gn (0 00 Hz) conforming to EN/IEC 00-- Shock resistance 0 gn (duration ms) conforming to EN/IEC 00-- Electric shock protection Class I conforming to EN/IEC 03 Class II conforming to EN/IEC 03 Degree of protection IP and IP (IP for XCS LFpppppp and XCS LFpppppp) conforming to EN/IEC 0 and EN/IEC 0-- () Cable entry 3 cable entries tapped M0 x. for cable gland ISO. Tightening capacity from to 3 mm or entries tapped for /" NPT (USAS B-) conduit Materials Zamak case Polyamide case Actuators (all types): steel XC0, surface treated () The safety function of this mechanism has not been assessed by the UL. () With a suitable and properly connected control system. (3) With operations/year, 0 days/year, hours/day and 30 seconds/cycle. () Live parts of these switches are protected against the penetration of dust and water. However, when installing take all necessary precautions to prevent the penetration of solid bodies, or liquids with a high dust content, into the actuator aperture. Not recommended for use in saline atmospheres. version:. -EN.indd
2 -EN.indd version:. 3 Characteristics Safety detection solutions 3 Contact block characteristics Rated operational characteristics a AC-, C300: Ue = 0 V, Ie = 0. A c DC-3, R300: Ue = 0 V, Ie = 0. A conforming to EN/IEC 0-- Conventional thermal current in enclosure Ithe = A (max. total thermal current = < A) Rated insulation voltage Ui = 0 V degree of pollution 3 conforming to EN/IEC 0- Ui = 300 V conforming to UL 0, CSA C- n Rated impulse withstand voltage Uimp = kv conforming to EN/IEC 0-- Positive operation NC contact(s) with positive opening operation conforming to EN/IEC 0--, Section 3C Minimum switching current 0 ma at 0 V Minimum switching voltage V Short-circuit protection A cartridge fuse type gg (gl) or A fast acting Connection Spring terminals, capacity: x 0. mm² flexible cables with 3 mm bared ends x. mm² flexible or solid cable Complementary characteristics Actuation speed Resistance to forcible withdrawal of actuator Fzh 300 N according to the verifi cation principle GS-ET (Fzh=Fmax/.3) Maximum: 0. m/s, minimum: 0.0 m/s XCS LF: Fzh 300 N with F max = 3000N : Fzh,00 N with F max = 00N Resilience :. J max or. J conforming to installation (see page 30/) XCS LF:. J max or. J (see page 30/) Mechanical durability XCS LF and : > million operating cycles Mushroom head pushbutton for escape release on XCS LF: operating cycles Maximum operating rate For maximum durability: 00 operating cycles per hour Minimum force for extraction of actuator (not locked) u 0 N Electrical durability conforming to EN/IEC 0-- appendix C Rated category AC- and DC-3 Maximum operating rate: 300 operating cycles/hour Load factor: 0. Alternating Current a 0/0 Hz o inductive circuit Direct Current c Millions of operating cycles Current in A Power cut for million of operating cycles Voltage V 0 o W 3 Ithe V 30 V 0 V Power of switching conforming to EN/IEC 0-- appendix C Rated category AC- and DC-3 V Power of switching : C300 0 V 0. A R300 0 V 0. A Power of switching : C300 0 V. A R300 V 0. A ma ma 3 ma ma 0 ma 0, A 0, A A, A A I (Ith) 3 A
3 References, characteristics Safety detection solutions 3 () 3 cable entries Type of switch Locking on de-energisation and unlocking on energisation of solenoid () LED indication Orange LED: guard open signalling Green LED: guard closed and locked signalling Supply voltage of solenoid and LED indicators a or c V (0/0 Hz on a) Type of contact on solenoid NC + NO NC simultaneous NC + NO NC + NO 3 NC simultaneous 3 References of switches without actuator ( NC contact with positive opening operation) with 3 cable entries tapped ISO M0 x. -pole NC + NO, slow break (3) XCS LF pole NC simultaneous, slow break (3) XCS LF3 XCS LF3 NC + NO, slow break (3) 3 3 XCS LF3 NC + NO, slow break (3) XCS LF3 0 3 NC simultaneous, slow break (3) 3 3 XCS LF3 Weight (kg) Solenoid and LED indicator characteristics Load factor 00% Rated operational voltage () a or c V or a 0 V or a 30 V Voltage limits Conforming to - %, + 0% of the rated operational voltage (including ripple on c) EN/IEC 0- Consumption <. W at 0 C and maximum voltage References of complete switches with 0 V or 30 V solenoid supply voltage To order a guard switch with an a 0/0 V solenoid supply voltage, replace the th number () by 3 in the selected reference. Example: XCS LF3 becomes XCS LF. To order a guard switch with an a 0/0 V solenoid supply voltage, replace the th number () by in the selected reference. Example: XCS LF3 becomes XCS LF3. References of switches with locking on energisation and unlocking on de-energisation To order a guard switch with locking on energisation and unlocking on de-energisation of the solenoid, replace the th number (3) by in the selected reference. Example: XCS LF3 becomes XCS LF. References of complete switches with 3 cable entries tapped for /" NPT conduit To order a guard switch with 3 cable entries for /" NPT conduit, replace the last number () by 3 in the selected reference. Example: XCS LF3 becomes XCS LF. References of actuators and separate components See page /. () Head adjustable in 0 steps throughout 30. Blanking plug for operating head slot included with switch. () A key operated lock (delivered with keys) enables forced opening of the interlocking mechanism, by authorised personnel, allowing withdrawal of the actuator and subsequent opening of the NC safety contacts. (3) Schematic diagrams shown represent the contact states whilst the actuator is inserted in the head of the switch. () Common supply for solenoid and LED indicators. Other versions: please consult our Customer Care Centre. Presentation: page / Characteristics: page /3 Dimensions: page / Schemes: page /0 version:. -EN.indd
4 -EN.indd version:. References, characteristics (continued) Safety detection solutions 3 () 3 cable entries Type of switch Locking on de-energisation and unlocking on energisation of solenoid () or by mushroom head pushbutton for escape release (3) LED indication Orange LED: guard open signalling Green LED: guard closed and locked signalling Supply voltage of solenoid and LED indicators a or c V (0/0 Hz on a) Type of contact on solenoid NC + NO, NC + NO, References of switches without actuator ( NC contact with positive opening operation) with 0 mm diameter, trigger action, latching mushroom head pushbutton (turn to release resetting) with 3 cable entries tapped ISO M0 x. NC + NO, slow break () NC + NO, slow break () XCS LF r XCS LF r Weight (kg).0.0 Solenoid and LED indicator characteristics Load factor 00% Rated operational voltage () a or c V or a 0 V or a 30 V Voltage limits Conforming to - %, + 0% of the rated operational voltage (including ripple on c) EN/IEC 0- Consumption <. W at 0 C and maximum voltage References of switches with 0 mm diameter, trigger action, latching mushroom head pushbutton with key release resetting (key n ) To order a guard switch with a 0 mm diameter, trigger action, latching mushroom head pushbutton with key release resetting (key n ), replace the th number () by in the selected reference. Example: XCS LF becomes XCS LF. References of complete switches with 0 V or 30 V solenoid supply voltage To order a guard switch with an a 0/0 V solenoid supply voltage, replace the th number by 3 in the selected reference. To order a guard switch with an a 0/0 V solenoid supply voltage, replace the th number by in the selected reference. References of complete switches with 3 cable entries tapped for /" NPT conduit To order a guard switch with 3 cable entries for /" NPT conduit, replace the last number () by 3 in the selected reference. Example: XCS LF becomes XCS LF3. References of actuators and separate components See page /. () Head adjustable in 0 steps throughout 30. Blanking plug for operating head slot included with switch. () A key operated lock (delivered with keys) enables forced opening of the interlocking mechanism, by authorised personnel, allowing withdrawal of the actuator and subsequent opening of the NC safety contacts. (3) 0 mm diameter, trigger action, latching mushroom head pushbutton with either turn to release or key release (key n ) resetting. () Schematic diagrams shown represent the contact states whilst the actuator is inserted in the head of the switch. () Common supply for solenoid and LED indicators. Other versions: please consult our Customer Care Centre. r: Available nd quarter 0. Presentation: page / Characteristics: page /3 Dimensions: page / Schemes: page /0
5 References, characteristics Safety detection solutions 3 () 3 cable entries Type of switch Locking on de-energisation and unlocking on energisation of solenoid () LED indication Orange LED: guard open signalling Green LED: guard closed and locked signalling Supply voltage of solenoid and LED indicators a or c V (0/0 Hz on a) Type of contact on solenoid NO + NC NC simultaneous NC + NO NC + NO 3 NC simultaneous 0 References of switches without actuator ( NC contact with positive opening operation) with 3 cable entries tapped ISO M0 x. -pole NO + NC, slow break (3) 3 -pole NC simultaneous, slow break (3) NC + NO, slow break (3) NC + NO, slow break (3) r 3 r 3 r 3 3 NC simultaneous, slow break (3) 3 r Weight (kg) Solenoid and LED indicator characteristics Load factor 00% Rated operational voltage () a or c V or a 0 V or a 30 V Voltage limits Conforming to - %, + 0% of the rated operational voltage (including ripple on c) EN/IEC 0- Consumption <. W at 0 C and maximum voltage References of complete switches with 0 V or 30 V solenoid supply voltage To order a guard switch with an a 0/0 V solenoid supply voltage, replace the th number () by 3 in the selected reference. Example: 3 becomes. To order a guard switch with an a 0/0 V solenoid supply voltage, replace the th number () by in the selected reference. Example: 3 becomes 3. References of switches with locking on energisation and unlocking on de-energisation To order a guard switch with locking on energisation and unlocking on de-energisation of the solenoid, replace the th number (3) by in the selected reference. Example: 3 becomes. References of complete switches with 3 cable entries tapped for /" NPT conduit To order a guard switch with cable entries for /" NPT conduit, replace the last number () by 3 in the selected reference. Example: 3 becomes. References of actuators and separate components See page /. () Head adjustable in 0 steps throughout 30. Blanking plug for operating head slot included with switch. () A tool delivered with the guard switch enables forced opening of the interlocking mechanism, by authorised personnel, allowing withdrawal of the actuator and subsequent opening of the NC safety contacts. (3) Schematic diagrams shown represent the contact states whilst the actuator is inserted in the head of the switch. () Common supply for solenoid and LED indicators. Other versions: please consult our Customer Care Centre. r: Available st quarter 0. Presentation: page / Characteristics: page /3 3 Dimensions: page / Schemes: page /0 3 r version:. -EN.indd 3
6 -EN.indd version:. References (continued) Safety detection solutions 3 References of actuators Description For use with Unit reference Weight kg Straight actuator XCS Z XCS Z0 XCS Z0 Actuator with wide fixing XCS Z Pivoting actuator XCS Z XCS Z03 Latch for sliding doors (Padlockable in open position) XCS Z XCS Z0 XCS Z0 Separate components Description For use with Unit reference Weight kg Blanking plug for operating head slot (Sold in lots of 0) Keys for interlock forced opening device (Sold in lots of 0) Padlocking device to prevent insertion of actuator, for up to 3 padlocks (padlocks not included) Tool for forced opening of interlocking device (Sold in lots of 0) XCS Z XCS LF XCS Z 0.00 XCS Z0 0.0 XCS Z Dimensions: page /
7 Dimensions Safety detection solutions 0 Dimensions Metal key operated switches XCS LFppppppp XCS LFppppppp, with mushroom head pushbutton for escape release 3, 3,3 3, 3,3 3 () 0 3,3,, xø, 0 3 () Ø3, Ø0 0, 3,3,, xø, 0 0 (),3, = 30 = 3, (),3,3, = 30 = 3, () 3 tapped entries for cable gland Ø: elongated holes Ø x. () 3 tapped entries for cable gland Ø: elongated holes Ø x. Plastic key operated switches ppppppp 3, 3, ,3,, xø, () 0 0 (),3, = 30 = 3, () 3 tapped entries for cable gland Ø: elongated holes Ø. x. Presentation: page / Characteristics: page /3 References: page / Schemes: page /0 version:. -EN.indd
8 -EN.indd version:. Dimensions (continued) Safety detection solutions 0 Dimensions (continued) XCS Z0,, Adaptor shank () 3 3 XCS Z0,, () Adaptor (included with actuator XCS Z0) for replacing, without drilling additional fixing hole, a guard switch XCK J or XCS L with actuator ZCK Y0 by a guard switch XCS LF with actuator XCS Z0. Ø: elongated holes Ø.3 x 0 Ø: elongated holes Ø.3 x 0 XCS Z03 XCS Z0, == = = = = 3 = 0 0, =, ,, 30, Fixing axis % related to actuator. Operating radius required for actuator XCS Z0 0 () 0 mm deep Ø: elongated holes Ø. x XCS Z0 xm () 00 0 Ø0, R = 000 R = 000 R = 000 R = 000 XCS Z03 R =0, R = 00 R = minimum radius
9 Setting-up, schemes Safety detection solutions 0 Setting-up Functional diagrams XCS LF/LEppp XCS LF/LEppp XCS LF/LE3ppp XCS LF/LE3ppp XCS LF/LE3ppp 3,,, 3,,, 3,,, 3,,, 3,,,,, ,, ,, Contact operation G Contact closed H Contact open G Unstable Schemes Wiring to PL=b, category conforming to EN/ISO 3- Example with -pole NC + NO contact and protection fuse to prevent shunting of the NC contact, either by cable damage or by tampering. Wiring to PL=d, category 3 conforming to EN/ISO 3- Example with NC + NO contact with redundancy of the contacts and the associated control relays. To activate K, it is necessary to remove and re-insert the actuator when the supply is switched on. F O I X 3 X X E E F X X E E O K K I KM F KM KM X K K KM M M Wiring to PL=e, category conforming to EN/ISO 3- and SIL 3 conforming to EN/IEC 0. Connection principle with Preventa safety module (the guard switch should be used in conjunction with a safety limit switch to give electrical/mechanical redundancy). Method for machines with long rundown time (high inertia) XPS VNE XPS 0 Interlocking device for actuator fi tted on guard and zero speed detection. Presentation: page / Characteristics: page /3 References: page / Dimensions: page / 0 version:. -EN.indd
10 -EN.indd version:. Schemes Safety detection solutions 0 Wiring to PL=b, category conforming to EN/ISO 3- Wiring examples with protection fuse to prevent shunting of the NC contact, either by cable damage or by tampering. Locking on de-energisation NC + NO Locking on energisation NC + NO and NC + NO auxiliary contacts and NC + NO auxiliary contacts XCS LF/LE3pp XCS LF/LEpp F F X 3 S 3 KM X X S X E E X E E O I KM O I KM KM M E-E: Solenoid supply E-E: Solenoid supply 3-: Safety contact, available for redundancy 3-: Safety contact, available for redundancy 3-X/E: LED (orange): actuator withdrawn 3-X/E: LED (orange): actuator withdrawn -X/E: LED (green): actuator inserted and locked -X/E: LED (green): actuator inserted and locked -: Safety pre-wiring obligatory -: Safety pre-wiring obligatory S: Manual unlocking button S: Locking signal () X: Unlocking signal Wiring to PL=d, category 3 conforming to EN/ISO 3- Wiring examples with redundancy for the guard switch contacts, without monitoring or redundancy in the power circuit Locking on de-energisation NC + NO and NC + NO auxiliary contacts Locking on energisation NC + NO and NC + NO auxiliary contacts XCS LF/LE3pp XCS LF/LEpp KM M F F X KM KM S X X E E S X X E E E-E: Solenoid supply E-E: Solenoid supply - and 3-3: Safety contacts, available for redundancy - and 3-3: Safety contacts, available for redundancy 3-X/E: LED (orange): actuator withdrawn 3-X/E: LED (orange): actuator withdrawn -X/E: LED (green): actuator inserted and locked -X/E: LED (green): actuator inserted and locked - and 3-: Safety pre-wiring obligatory - and 3-: Safety pre-wiring obligatory S: Manual unlocking button S: Locking signal () X: Unlocking signal () The locking signal could be lost at any instant (power failure, cable breakage, etc.). Do not use guard switches with locking on energisation for applications where the safety of the operator could be jeopardised in the event of the guard opening. For these applications, use guard switches with locking on de-energisation.
Safety detection solutions
Presentation, actuator operated etal, types CS A, CS B, CS C and CS E Plastic, double insulated, turret head, types CS P or CS PA or CS TA and CS TE etal, types CS A, CS B, CS C, CS E with or without locking
More informationSafety automation solutions
Operating principle, characteristics Preventa safety s types XPS AV,, For and switch monitoring Operating principle Safety s XPS AV, and are used for monitoring circuits conforming to standards EN/ISO
More informationPendant control stations 6
Characteristics 6 Environment Conformity to standards EN/IEC 6097-5-1 EN/IEC 600-, UL 508, CSA C- n EN/IEC 6097-5-5 and EN/ISO 850 for versions with trigger action Emergency stop Product certifications
More informationSafety dialogue solutions
General Presentation Emergency stop trip wire switches Emergency stop trip wire switches are designed to: b avert hazards (dangerous phenomena) at the earliest possible moment, or to reduce risks which
More informationRM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
More informationLC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - 220 V AC coil
Product data sheet Characteristics LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationHS5D. Miniature Interlock Switches First in. Head Removal Detection Function for Safer Performance. First in. the Industry.
y HS5D First in the Industry Miniature Interlock Switches First in the Industry Head Removal Detection Function for Safer Performance (*based on IDEC research, July 09) New Generation Miniature Interlock
More informationPreventa Machine Safety Products
Preventa Machine Safety Products Catalog 2009 200 Supplement Safety Relay Modules 2 Contents Preventa safety relay modules Selection guide 2 Electrical Ratings 6 Types XPSAC and XPSAXE For Emergency stop
More informationYour Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
More informationGeneral 1-2-Opto-electronics Safety Switches 4-Emergency
General 1-2-Opto-electronics Safety Switches 4-Emergency Logic Power The Lifeline 4 cable/push button operated system can be installed along or around awkward machinery such as conveyors and provide a
More informationRM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
More informationSeries 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
More informationRM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters
Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main
More informationR.C.C.B. s two-pole LEXIC
87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...
More informationPlug and Socket Devices CES 63 A Series 8579
www.stahl.de > Switch socket / plug 63 A > Large switch handle with clear switch position indication padlockable in 0- and I-position > Low insertion and withdrawal forces through individually encapsulated
More informationE-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
More informationNF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101433D0201 28/03/11 NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits.
More informationElectronic overload relay EF19 and EF45
Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More informationSafety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
More informationSKR - industry relay
SKR - industry relay the universal relay SKR the time module STM the socket The strengths of the SKR industry relay lie in the mature and thoughtout construction. Over-average contact safety and life time,
More informationAF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits
More informationElectronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.
More informationTM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector
Product datasheet Characteristics TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus
More informationD4JL. Guard Lock Safety-door Switch. World's Top * Holding Force of 3,000 N. Features
Guard Lock Safety-door Switch D4JL CSM_D4JL_DS_E_4_1 World's Top * Holding Force of 3,000 N *For plastic models, as of May 2008 Two safety circuits and two monitor contacts provide an array of monitoring
More informationPreventa Machine Safety Products
Preventa Machine Safety Products Catalog 20 Chapter Safety Interlock and Limit Switches Contents chapter Selection guide: Preventa XCS safety switches............ /6 Overview.../ Safety limit switches
More informationMachine Safety Switches
Machine Switches SI-LS31H Series 31 mm Limit-Switch-Style with Hinged Lever Actuators Features Limit switch design (EN 50047) For use on doors or flaps Positive opening safety contacts (IEC 60947-5-1)
More informationDRM75A 230V 20/100A DIN rail single phase two wire energy meter
DRM75A 230V 20/100A DIN rail single phase two wire energy meter 1.1 Safety instruction 1.2 Foreword 1.3 Performance criteria 1.4 Specifications 1.5 Basic errors 1.6 Description 1.7 Dimensions 1.8 Installation
More information48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
More informationXUSL4E4BB091NS2 XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm
Characteristics XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm Complementary Detection system Kit composition [EAA] effective aperture angle Emission Main Range of product Product or
More informationTechnicaldata General
Currenttransformer-operatedoverloadrelay,60-90A,1N/O+1N/C Partno. ZW7-90 Articleno. 002618 CatalogNo. XTOT090C3S Deliveryprogramme Product range ZW7 current transformer-operated overload relays Description
More informationThermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
More informationHERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
More informationMachine Safety Switch: SI-LM40 Series Limit Switch Style
Machine Switch: SI-LM40 Series Limit Switch Style SI-LM40 Series Limit Switch Style with Flexible In-Line Actuator Positive-opening safety contacts (IEC 60947-5-1) (not dependent upon springs) Standard
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More informationManual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationManual Motor Starter MS 116 up to 16 A Technical Data
Manual Motor Starter MS 116 up to 16 A Technical Data Type MS 116 Standards: Major International IEC 60 947-4-1 / IEC 60 947-2 and European Standards EN 60 947-4-1 / EN 60 947-2 Approvals, Certificates
More informationExplosion proof enclosures
1 of 7 Explosion proof enclosures DE8 C 2 of 7 The Ex d enclosures are rugged and designed for harsh environment like: Oil and gas industry Chemical industry Pharmaceutical industry Agribusiness Without
More informationElectronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
More informationE-STOP relays, safety gate monitors
Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Unit features Gertemerkmale Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection
More informationContact expansion modules
Gertebild ][Bildunterschrift Kontakterweiterungen Contact for increasing the number of available contacts Approvals Zulassungen Unit features Gertemerkmale Positive-guided relay outputs: 4 safety contacts
More informationFIREDEX 2200. Conventional Fire Panels
68 Flexible, high specification system Choice of 1, 2, 4 or 8 zones Simple one-shot auto-reset user test facility Approved to EN54 Maintenance free poly switch circuit protection, with auto reset Class
More information8146/5 Series Breaker Panelboards
8146/5 Series Breaker Panelboards DISTRIBUTION BREAKER PANELBOARDS FOR HAZARDOUS & CORROSIVE ENVIRONMENTS Breaker Panels Features: Wide variety of Flameproof branch circuit breakers for Zone 1 & Division
More informationType: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
More informationBimetallic Overload Relay Specifications
Technical Data Bimetallic Overload Relay Specifications Bulletin Number 193K, 193T1 Topic Page Product Overview 2 Standards compliance and Certifications 2 General Specifications 193K 3 Approximate Dimensions
More informationE-STOP relays, safety gate monitors
Unit features Safety features gang engertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
More informationPNOZsigma - Base units
PNOZsigma - Base units Register Login Sensors Control and Communication Electronic monitoring relays Safety Relays PNOZ X PNOZsigma PNOZelog PNOZmulti PNOZpower Configurable control systems Programmable
More informationSICONT Limit Switches Type 3SE3 upto 500 VAC, 600 VDC, 10A
s SICONT Limit Switches Type 3SE3 upto 500 VAC, 600 VDC, 10A Introduction The technical and descriptive information on the function, construction and selection of the new types of 3SE3 limit switches is
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More informationPlug and Socket Devices SolConeX 16 A Series 8570
www.stahl.de > Switch socket / plug 16 A > Minimal force required to insert and remove > Can be optionally equipped with an auxiliary contact for control and signalling purposes > arge switching handle
More informationCAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a
More information48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
More informationADM1TE 5/30A DIN rail single phase two wire energy meter
ADMTE 5/30A DIN rail single phase two wire energy meter. Safety instruction.2 Foreword.3 Performance criteria.4 Specifications.5 Basic errors.6 Description.7 Dimensions.8 Installation.9 Operating.0 Troubleshooting.
More informationmecotron Safety relay ESTOP-2 For emergency stop monitoring
E0006 000824 Safety relay E-2 For emergency stop monitoring Description The safety module E-2 for emergency stop monitoring is used for safety breaking one or more circuits and is designed to be incorporated
More informationSMS 4 / SMS 5 safety mat Product information
SMS 4 / SMS 5 safety mat Product information SMS 4 / SMS 5 safety mats Safety mats are used for the protection of man on machinery and plants with hazardous movements. Typical fields of application are,
More informationCircuit Breakers. NRC Series. NRC Series. 900 www.idec.com
Switches & Pilot Lights Display Lights NRC series circuit breakers offer circuit protection which is far superior to using fuses in applications containing relay circuits, motor circuits, heater circuits,
More informationContactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
More informationHeavy Duty Solenoid Controlled Access Lock. User Manual - Original Language Version
OLYM-S24D-C24D The Olympus 4HD is a heavy duty solenoid controlled access lock available with either a stainless steel tongue actuator or a heavy duty handle. The Olympus 4HD is capable of supporting Category
More informationSafe switching and monitoring Solenoid Interlocks
Safe switching and monitoring Solenoid Interlocks Solenoid locking switches are used on sliding, hinged and removable guard doors that must be closed and locked for operator safety. It is a two part system
More informationACS-30-EU-EMDR-10-MOD
Multi-application heat tracing Control and Monitoring in commercial and residential buildings Roof & Gutter de-icing sensor module Technical Information Approvals Module IP rating Ambient operating temperature
More informationE-STOP relays, safety gate monitors
Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Gertemerkmale Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous
More informationI E D C E R T. Net MA N A G E ME N T S Y S T E M ISO 9001: 2000 9105.RAVI. Pendant Stations LADY Series
C E R T I F MA N A G E ME N T I E D Net ISO 9001: 2000 9105.RAVI I S Y S T E M Pendant Stations LADY Series 4.1 Pendant Stations LADY Series - LA type single-row Main Features The new LADY series single-row
More informationHS5E. Safety Door Lock Switches. Four-contact safety switch with solenoid interlock. Ideal for use on small doors within limited space.
HS5E Safety Door Lock Switches Four-contact safety switch with solenoid interlock. Ideal for use on small doors within limited space. Solenoid type safety switch with four contacts. Compact Body. Ideal
More informationOutdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
More informationCatalog. Arc Guard System TM TVOC-2
Catalog Arc Guard System TM TVOC-2 Introduction An even better Arc Guard System TVOC-2, ABB s latest Arc Monitor, builds on the well known TVOC design. Its new functions and features improve an already
More information49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
More informationCQM1-SF200/CS1W-SF200
Safety Relay Unit ( I/O Unit Type) CQM1-SF200/CS1W-SF200 CSM_CQM1-SF200_CS1W-SF200_DS_E_2_1 A Safety Relay Unit That Functions as a I/O Unit. Less Installation Space and Wiring Required. Safety Relay Unit
More informationE-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Gertemerkmale Positive-guided relay outputs: 3 safety contacts (N/O),
More informationBulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller
Overview/Modes of Operation Bulletin 150 Smart Motor Controller The SMC-3 is a compact, simple to use, solid-state motor controller designed to operate 3-phase motors. It features a built-in overload relay
More informationType: DILM32 10(24V50HZ) Article No.: 277247
Type: DILM32 10(24V50HZ) Article No.: 277247 Ordering information Rated operational current AC 3 400 V I e A 32 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,
More information33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
More informationMILLENIUM INSTALLATION MANUAL NTR 735 A. Simple Automation Control Module (MAS)
MILLENIUM Table of contents 1. INTRODUCTION 1 2. HARDWARE DESCRIPTION 2 3. INSTALLATION 5 4. CONNECTION 6 5. USER SAFETY AND PROTECTION OF EQUIPMENT 8 1. Introduction The MILLENIUM series has been designed
More informationSELECTION, APPLICATION AND MAINTENANCE
DIESEL PROTECTION SYSTEMS Automatic Diesel Engine Shut Down System for Safe Area Applications SELECTION, APPLICATION AND MAINTENANCE Series 300 Series 310 SYSTEM DESCRIPTION Suitable for attended engine
More informationETC TWO STAGE ELECTRONIC TEMPERATURE CONTROL
RANCO INSTALLATION INSTRUCTIONS ETC TWO STAGE ELECTRONIC TEMPERATURE CONTROL Relay Electrical Ratings PRODUCT DESCRIPTION The Ranco ETC is a microprocessor-based family of electronic temperature controls,
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationHow To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
More informationInductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
More informationELECTROMAGNETIC DISC BRAKES
ELECTROMAGNETIC DISC BRAKES TYPE 66E 15/30 52.121 Hand release Lining wear adjustment Torque adjustment 4 holes ø13 DISC SIZE Ø A Braking torque Nm Regulated from (40-100%) Reaction on the shaft N Control
More informationSafety Manual BT50(T) Safety relay / Expansion relay
Safety Manual BT50(T) Safety relay / Expansion relay ABB Jokab Safety Varlabergsvägen 11, SE-434 39, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this document
More informationTechnical catalogue. Modular DIN rail components Installation contactors
Technical catalogue Modular DIN rail components Installation contactors Installation Contactors Overview... ESB Installation Contactors 0 A / AC-/AC-7a ESB0...4 4 A / AC-/AC-7a ESB4...5 40 A / AC-/AC-7a
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationDigital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More informationType: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description
Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
More informationRY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
More informationType: DILM9 10(24VDC) Article No.: 276705
Type: DILM9 10(24VDC) Article No.: 276705 Ordering information Rated operational current AC 3 400 V I e A 9 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors, 50
More informationMini Motor Contactor J7KNA Main contactor Accessories Approved Standards Standard Guide No (US,C) Ordering Information tage Model Number Legend gear
Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC
More information9 Control Equipment. Control Button Series 8082
9 Control Equipment Control Button 01706E00 contact elements enable contact blocks to be combined easily; using an actuator in the 8602 series, regardless of the type of actuator, up to 4 contact elements
More informationWaterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
More information4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More informationCross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationSUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original
SUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original A motor starter is a combination of devices to allow an induction motor to start, run and stop according
More informationMotor circuit-breakers
Thermal-magnetic motor circuit-breakers type GV2-M GV2-M Thermal-magnetic motor circuit-breakers GV2-M Pushbutton control Standard power ratings Setting Magnetic Thermal Reference Weight of 3-phase motors
More informationSafety Switches 3-1. General. 3-Interlock. Switches. Operator. Interface. Logic. Power. Safety Switches Table of Contents. 2-Opto-electronics
Safety Table of Contents Selection Criteria Selection Flowchart... 3-2 Selection Tips... 3-3 Technology Overview... 3-4 Interlock Overview Versatility... 3-6 Accessories for Tongue and Guard Locking...
More informationTechnical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.
Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic
More informationFP2 Relay. The Best Relaytion
The Best Relaytion 2 pole telecom / signal relay Through Hole Type (THT) Polarized. Relay types: non-latching with1 coil latching with 1 coil latching with 2 coils Features Telecom / signal relay (dry
More informationTHE ADVANTAGES ARE YOURS
THE ADVANTAGES ARE YOURS The new switches/discrepancy switches "R0-DR0" have special characteristics that make them very different from the normal switches on the market. Listed below are some of the many
More informationA good connection. International approvals.
E X - P L U G S A N D R E C E P T A C L E S A to A Plastic version for Zone and Zone A good connection Providing electrical energy there, where it is most needed even in hazardous areas for the Zones,,
More informationNDQ5 Series. Automatic Transfer Switch. Shanghai Liangxin Electrical CO.,LTD
Shanghai Liangxin Electrical CO.,LTD Address: No. 668 Heng An Road, Pu Dong New District, Shanghai Zip: 200137 Tel: 86-21-5012789 Fax: 86-21-58675966 E-mail: client@sh-liangxin.com LINE 1 LINE 3 LINE 5
More information