Fast Ethernet and PoE+ over Coax Cable with 2,000 ft (609 m) Reach

Transcription

1 IP MIGRATION MADE SIMPLE Fast and PoE+ over Coax Cable with 2,000 ft (609 m) Reach AWARD WINNING CLEER The award winning CLEER (Coax Leveraged Extended Reach) switch is the world s first 24 port over coax managed switch. This powerful enterprise grade switch delivers fast and PoE+ over coax cable with 2,000 ft (609 m) reach. CLEER was designed to make the migration to IP quick, easy and cost effective by leveraging an existing coax infrastructure. Benefits include: Accelerating your return on investment by reducing infrastructure costs. Collapsing planning and deployment time. Eliminating infrastructure barriers, risks, disruption and costs. Creating a robust IP platform that is easy to configure, deploy and manage. Unlike other over Coax technologies, the CLEER switch offers: Speed, Reach and CLEER delivers 100 Mbs (symmetrical, full duplex) and PoE+ over coax cable with 2,000 ft (609 m) reach. It is designed to support the most demanding IP Cameras with plenty of bandwidth to spare. No speed degradation with longer distance. Industry Leading WISE Technology sharing for redundancy, load balancing, AC/DC options, hot swappable power supply and auto-sensing VAC delivering 500 to 1,000 Watts of power. CLEER is one of the most energy efficient switches on the market, consuming less than 17 Watts of power to operate. Managed Switch with Plug-and-Play Option CLEER can either operate in a transparent mode functioning as a bridge, allowing for plugand-play deployment, or as a fully managed switch with high value features specifically designed for the security industry, including: management by port for easy reset of ports. Port MAC locking for higher security and peace of mind. Simple Network Manager, an intuitive Web GUI that makes managing the switch a breeze. CLEER Switch At-a-Glance The CLEER is a high-performing enterprise grade 24 port over Coax managed switch that helps maximize your return on investment and reduce your total cost of ownership. CLEER transforms the existing coax infrastructure into a robust IP platform with power ideal for IP cameras and other IEEE compliant IP devices. Advantages Quick, easy and cost effective IP migration Robust enterprise grade switch features ensuring uptime Simple GUI interface making configuring, managing and troubleshooting the network a 20 breeze OVER YEARS 1994 ~ 2015

2 TECHNICAL FEATURES CLEER Switch Technical Specifications Processor Memory Interface: Uplink (Trunk IP) NV-CLR inches x 1U without rack ears: 4.45cm x 43.5cm x 25.2cm (HxWxD), 1.75 x x 9.92 (HxWxD) 3.6 kg (7.94 lb) Standalone, rack or shelf-mountable; 2 brackets included for installation Broadcom BCM56018 switch processor, 266MHz 32MB FLASH, 64MB DDR SDRAM Maximum 2 uplinks, each 1Gb/s (full duplex), either: 2 mini-gbic ports: 1000 Base-TX/SX/LX/EX/ZX/LHX (determined by SFP, transceiver module installed), IEEE 802.3z, fiber optic cable; or 2 RJ45 ports: 10/100/1000 Base-T autosensing, independent speed selection, IEEE 802.3, CAT5e/6 copper cable A media converter (EC-Link or EC4) is required at the device end. Please refer to Media Converter data sheet. Interface: Downlink (PoE and IP to Adapter) Management Supply Consumption 16.5W WISE Sharing 24 x BNC Jacks Speed: 100Mb/s (full duplex) PoE : 30 Watts Maximum (See Appendix) Maximum Distance: 1500 (457M) over RG59 COAX Cable 2000 (609M) over RG6 COAX Cable 24 x Status LEDs: Configruation Options: Link Activity / Link / Off 1 LAN port (MGMT): RJ45, 10/100 Base-T autosensing, IEEE UART console port: RJ45 to DB9 cable Hot-Swappable Supply Unit Autosensing VAC, 50/60 Hz Output: 500W max at 100VAC, 1000W max at 240VAC DC voltage: 48VDC to 56VDC Endpoint devices must be compliant with IEEE 802.3af/at 2 male connectors (rear) DC IN and DC OUT: 48VDC to 56VDC -10 C to 50 C

3 APPENDIX A: POWER VS REACH Appendix A: vs Reach

4 IP MIGRATION MADE SIMPLE COAX MEDIA CONVERTERS MEDIA CONVERTER TO EXTENDER The EC-Link and EC4 media converters support the IP end points leveraging the CLEER or EC10 switches. In addition, the EC-Link can be easily converted to become an extender, with an EC-Link at the base unit and an additional media converter - either another EC-Link or EC4 - at the other end. If required, the media converters can be locally powered to deliver additional power to the IEEE compliant IP end point. EC-Link and EC4 Connected to the EC10 Switch COVER Media Converters At-a-Glance The EC-Link and EC4 are energy-efficient media converters for the CLEER and EC10 switches. In addition, the EC-Link can be easily converted to become an extender. Advantages Quick, easy and cost effective IP migration Energy efficient, consuming less than one watt of power per EC-Link EC-Link can become an extender and paired with another media converter (EC-Link or EC4) to create a single run solution EC-Link as an Extender Locally ed or Connected To an Always On POE Injector COVER 20 YEARS OVER 1994 ~ 2015

5 COAX MEDIA CONVERTERS TECHNICAL FEATURES EC4 Media Converter Technical Specifications Coax Interface NV-EC cm x 7cm x 11cm (HxWxD) 0.98 x 2.75 x 4.3 (HxWxD) 96 g (3.3 oz) Inline between the CAT5e/6 cable (to IP endpoints) and the COAX cable (to CLEER/EC Switch) Inline between the CAT5e/6 cable (to IP endpoints) and the COAX cable (to a second EC-Link when used as an Extender) 1 BNC port: COAX cable RG59, RG6, RG11 Interface DC IN 4 x RJ45 port: 10/100 Base-T autosensing, IEEE 802.3af/at, 100 Mb connection to IP end device Optional: 48VDC 56VDC via an external AC/DC Adapter (IEC Class II isolated only) Consumption 1.65W DC voltage on RJ45 port (37-56V); Endpoint devices must be compliant with IEEE 802.3af/at 0 C to 70 C EC-Link Media Converter Technical Specifications Coax Interface NV-LNK cm x 3.2cm x 8.8cm (HxWxD) 0.83 x 1.23 x 3.46 (HxWxD) 42 g (1.48 oz) Inline between the CAT5e/6 cable (to IP endpoint) and the COAX cable (to CLEER/EC Switch) Inline between the CAT5e/6 cable (to IP endpoint) and the COAX cable (to a second EC-Link when used as an Extender) 1 BNC port: COAX cable RG59, RG6, RG11 Interface DC IN (Screw Terminal) Consumption 0.9W 1 x RJ45 port: 10/100 Base-T autosensing, IEEE 802.3af/at, 100 Mb connection to IP end device Optional: 48VDC 56VDC via an external AC/DC Adapter (IEC Class II isolated only) DC voltage on RJ45 port (37-56V); Endpoint devices must be compliant with IEEE 802.3af/at -50 C to 70 C Optional DC Adapters NV-EC-48-PWR NV-EC-100-PWR 44mm x 30mm x 105mm (WxHxD) 1.73 x 1.81 x 4.13 (WxHxD) 60mm x 36mm x 154mm (WxHxD) 2.36 x 1.42 x 6.06 (WxHxD) 510 g (17.99 oz) 510 g (17.99 oz) Input VAC 50/60 Hz 100VA; IEC380-C14 power inlet Input VAC 50/60 Hz 150VA; IEC380-C14 power inlet Output 48VDC 1A Output 48VDC 2A -29 C to 45 C -29 C to 45 C Storage Teperature -40 C to 75 C Storage Teperature -40 C to 75 C