RAID-M 100. Innovation with Integrity. Hand-held Chemical Agent Monitor. Defence CBRNE

Transcription

1 RAID-M 100 Hand-held Chemical Agent Monitor Innovation with Integrity Defence CBRNE

2 RAID-M 100 used in the Field The RAID-M 100 provides very low detection limits and short response times. Due to the state of the art measuring cell and highly sophisticated software nerve agents can be detected at lowest levels. Short recovery times are achieved by an automatic purge mode. Data logging system The RAID-M 100 is a hand held Chemical Agent Detector based on the well established principle of Ion Mobility Spectrometry. It is designed to detect, search for and locate Chemical Warfare Agents (CWA) on personnel, equipment, vehicles and on the ground. Applications within collective protection facilities are also possible. The RAID-M 100 is equipped with a data logging system that is capable of continuous data monitoring. The two integrated data loggers are able to record independently from each other individual spectra (Spectrum-Logger) as well as the results of a measurement campaign (Event-Logger). Both can be configured independently. The capacity of the event logger is about 3000 events that can be stored, whereas the spectrum logger keeps 30 full spectra for subsequent inspection e.g. of unknown compounds. Access to such data is possible via the standard software RAID EventReader, no additional software is necessary. General specification The RAID-M 100 is able to detect, classify and identify, quantify and continuously monitor concentration levels of the CWA s specified. The identity of substances detected is displayed by its standard code (GA, VX, etc.) or its appropriate abbreviation (e.g. GSI for the G-mode simulant). For each class (G, H and T) a separate bar line is provided, thus all the classes may be monitored independently. Hazard levels are indicated by an incremental bar level display with eight increments. Moreover the RAID-M 100 gives an audible and an optical alarm when identifying an agent. Display Key operation field Identification and bar display Visual alarm

3 Reliable Mobile Detector Basic set Confidence tester for both modes Transport and storage container Protective bag 1 Li-Ion rechargeable battery pack Battery charger Li-lon/ EU with battery adapter RAID-M 100 Carrying sling Manual Data and power cable with power supply 12 VDC / RS232 Portable and one handed to operate The RAID-M 100 is portable with a carrying sling. Likewise it can be installed on a vehicle and ship mounting. In addition the equipment is capable of operation within collective protection facilities. Vehicle and shipboard integration Remote control unit and vehicle mounting are offered as optional components to support the vehicle or shipboard installations of RAID-M 100 instruments. By means of an EMC unit the RAID-M 100 can be powered with V. Protected from any hazardous chemicals the soldier, fireman or any other user easily operates the RAID-M 100 from inside the vehicle or ship. RAID-M 100 with vehicle mounting Remote Control Unit

4 Fields of Application RAID-series product line RAID-AFM (NC version) Stationary detector for critical infrastructure protection Anti-terrorism Homeland defense First responder market Non-proliferation measures Real time monitoring of toxic and hazardous industrial chemicals in the environment Fire fighting control Chemical disaster management RAID-XP Innovative mobile NC Detector RAID-S2 RAID-M 100 available for homeland defence market Mounted gas trace detector for long term operation

5 XIMS-NT IMS Spectra evaluation software Control and Data System XIMS-NT Features of Bruker XIMS NT IMS instrument control and data acquisition of the detector IMS spectra processing and analysis of two- and three-dimensional IMS spectra on the PC Substance identification and quantification Library Editor for ion mobility spectra libraries Network operation with the NC monitoring software IMS spectra acquisition and substance identification with Bruker XIMS NT. NC Monitoring software Application of several RAID (Rapid Alarm Identification Device) gas trace detectors and Bruker SVG2 radiation meters in one networking system for remote monitoring of hazardous compounds and remote instrument control. The system can be integrated into other control and alarm systems. Monitoring System consisting of one SVG2, three RAID with different views and one Remote Alarm Unit. Our product line for chemical, biological, radiological and nuclear detection Nuclear & Radiation Detection Biological Agent Detection Chemical Warfare Agent Detection Personal Chemical Agent Detector Chemical Emergencies & Demilitarisation RAID-XP, RAID-AFM (NC version) Innovative and flexible instruments for NC detection ptd Automated on-site detection of toxins MALDI Biotyper Software tool for reliable identification of unknown microorganisms (BWA) MM 2 Mobile Mass Spectrometer for reconnaissance vehicles RAID series Rapid Alarm and Identification Devices based on proven IMS technology RAPID FT-IR Stand-off detector for atmospheric pollutants µraid The compact, flexible and reliable personal detector E 2 M Enhanced Environmental Mass Spectrometer for mobile on-site analysis

6 Bruker Daltonics is continually improving its products and reserves the right to change specifications without notice. BDAL CBRN # Technical Specifications Length x Width x Height 400 x 115 x 165 mm Weight 2,9 kg Power requirement V DC (detector module) V AC / Hz (data and power cable with power supply) Temperature range C Radiation active source 63 Ni of 100 MBq activity (below the European exemption limit) (370 MBq on request) Environmental testing According to MIL STD 810F (US) and DEF STAN (UK) Detection range low ppb up to several ppm (substance specific) Battery Length x Width x Height: 130 x 70 x 36 mm Weight 560 g RAID-M 100 is powered from an integral, rechargeable lithium ion battery pack Spare parts No requirement to change consumable when RAID-M100 detects a challenge, any consumables used are kept to a minimum. Dust, purge and drying filters can be exchanged by the operator. Substances detectable (List not exhaustive) CWA s: GA, GB, GD, GF, VX, HD, HN, L, AC Test substances: DPM (GSI), MSAL (HSI) Toxic Industrial Chemicals: CL2, Chloride (CLX), Cyanide (CY), SO2, Toluene diisocyanate (TDI) Bruker Detection Division of Bruker Daltonik GmbH Zweigniederlassung Leipzig Leipzig Germany Phone +49 (341) Fax +49 (341) detection@bruker.com Bruker Detection Division of Bruker Daltonics Ltd. Coventry United Kingdom Phone +44 (2476) Fax +44 (2476) detection@bruker.com Bruker Detection Corp. Billerica, MA USA Phone +1 (978) Fax +1 (978) detection@bruker.com