FEATURES DESCRIPTIO TYPICAL APPLICATIO. LM / LM /LM Micropower Voltage Reference APPLICATIO S
|
|
|
- Erick Scott
- 7 years ago
- Views:
Transcription
1 Micropower Voltage Reference FEATRES 1µA to 2mA Operating Range Guaranteed 1% Initial Voltage Tolerance Guaranteed 1Ω Dynamic Impedance Very Low Power Consumption APPLICATIO S Portable Meter References Portable Test Instruments Battery Operated Systems Current Loop Instrumentation DESCRIPTIO The LM is a two terminal band gap reference diode that has been designed for applications which require precision performance with micropower operation. The device provides guaranteed operating specifications at currents as low as 1µA. The nominal voltage is 1.235V with both 1% and 2% tolerances available. Some additional features are: maximum dynamic impedance of 1Ω, low noise and excellent stability over time and temperature. Advanced design, processing and testing techniques make Linear s LM a superior choice over previous designs. A micropower 5V reference application is shown below. For guaranteed TC, micropower references, see the LT134 data sheet., LTC and LT are registered trademarks of Linear Technology Corporation. TYPICAL APPLICATIO Micropower 5V Reference Reverse Voltage Change with Current V + LM334 V LM R 1M 1% 5.6k LT V IN 7V TO 15V 6 15pF 5V 3.1M 1% OTPT VOLTAGE CHANGE (mv) T A = 25 C 185/285/385 TA1a REVERSE CRRENT (ma) 185/285/385 TA1b 1
2 ABSOLTE AXI RATI GS W W W Operating Temperature Range LM (OBSOLETE) C to 125 C LM C to 85 C LM C to 7 C Storage Temperature Range C to 15 C Lead Temperature (Soldering, 1 sec)... 3 C Reverse Breakdown Current... 3mA Forward Current... 1mA PACKAGE/ORDER I FOR ATIO W BOTTOM VIEW 1 2 H PACKAGE 2-LEAD TO-46 METAL CAN T JMAX = 15 C, θ JA = 44 C/W, θ JC = 8 C/W (NOTE 3) OBSOLETE PACKAGE Consider the S8 or Z Packages for Alternate Source ORDER PART NMBER LM185H-1.2 LM285H-1.2 LM385H-1.2 LM385BH-1.2 NC 1 NC 2 NC 3 TOP VIEW NC 4 5 NC (DO S8 PACKAGE NOT SE) 8-LEAD PLASTIC SO T JMAX = 15 C, θ JA = 19 C/W BOTTOM VIEW Z PACKAGE 3-LEAD PLASTIC TO-92 T JMAX = 15 C, θ JA = 16 C/W (NOTE 3) ORDER PART NMBER LM285Z-1.2 LM385Z-1.2 LM385BZ-1.2 ORDER PART NMBER LM385BS8-1.2 LM385S8-1.2 S8 PART MARKING B Consult LTC Marketing for parts specified with wider operating temperature ranges. 2
3 ELECTRICAL CHARACTERISTICS Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Note 2: Selected devices with guaranteed maximum temperature coefficient are available upon request. LM / The denotes the specifications which apply over the full operating temperature range, otherwise specifications are at T A = 25 C. For the LM T MIN = 55 C and T MAX = 125 C. For LM T MIN = 4 C and T MAX = 85 C.For LM T MIN = C and T MAX = 7 C. For MIL-STD components, please refer to LTC883C data sheet for test listing and parameters. LM /LM LM /LM385B-1.2 SYMBOL PARAMETER CONDITIONS MIN TYP MAX MIN TYP MAX NITS V Z Reverse Breakdown Voltage T A = 25 C, I MIN I R 2mA LM V LM V LM385B-1.2 (Note 3) V V Z Average Temperature Coefficient I MIN I R 2mA (Notes 2, 3) 2 2 ppm/ C Temp I MIN Minimum Operating Current T MIN T A T MAX µa V Z Reverse Breakdown Voltage I MIN I R 1mA I R Change with Current T A = 25 C 1 1 mv T MIN T A T MAX mv 1mA I R 2mA T A = 25 C 1 1 mv T MIN T A T MAX 2 25 mv r Z Reverse Dynamic Impedance I R = 1µA T A =25 C Ω T MIN T A T MAX Ω e n Wideband Noise (RMS) I R = 1µA, 1Hz f 1kHz 6 6 µv V Z Long Term Stability I R = 1µA, T A = 25 C ±.1 C 2 2 ppm/khr Time Note 3: For applications requiring low initial tolerance guaranteed over temperature consult the LT14 data sheet. 3
4 TYPICAL PERFOR A CE CHARACTERISTICS W 1 Reverse Characteristics 55 C TO 125 C 1.2 Foward Characteristics T A = 25 C REVERSE CRRENT (µa) 1 1 FORWARD VOLTAGE (V) REVERSE VOLTAGE (V) 185/285/385 G FORWARD CRRENT (ma) 185/285/385 G2 REVERSE VOLTAGE (V) Temperature Drift Reverse Dynamic Impedance Reverse Dynamic Impedance DYNAMIC IMPEDANCE (Ω) C TO 125 C f = 25Hz DYNAMIC IMPEDANCE (Ω) 1k 1k T A = 25 C I R = 1µA TEMPERATRE ( C) 185/285/385 G REVERSE CRRENT (ma) 185/285/385 G k 1k 1k 1M FREQENCY (Hz) 185/285/385 G5 NOISE (nv/ Hz) Noise Voltage Filtered Output Noise Response Time 7 2. I R = 1µA I R = 1µA 6 RC LOW PASS 1.5 OTPT INTEGRATED NOISE (µvrms) 1µA 5 R 4 C VOLTAGE (V) V IN 36k INPT V OT 1 1 1k 1k 1k FREQENCY (Hz) 1 1k 1k 1k CTOFF FREQENCY (Hz) TIME (µs) 185/285/385 G6 185/285/385 G7 185/285/385 G8 4
5 SCHE ATIC DIAGRA W W + 7.5k Q13 Q3 Q4 Q7 Q12 2k Q1 2pF 2pF Q11 5k Q2 Q5 6k Q1 Q9 3k Q6 Q8 Q14 1k 5Ω 6k 185/285/385 SD 5
6 PACKAGE DESCRIPTIO H Package 2-Lead and 3-Lead TO-46 Metal Can (Reference LTC DWG # ) REFERENCE PLANE ( ) ( ).5 (12.7) MIN.16.21** ( ) DIA ( ) *.25 (.635) MAX.5 (1.27) TYP ( ) OBSOLETE PACKAGE.1 (2.54) TYP PIN (1.27) TYP FOR 3-LEAD PACKAGE ONLY ( ) H2/3(TO-46) 198 * LEAD DIAMETER IS NCONTROLLED BETWEEN THE REFERENCE PLANE AND.45" BELOW THE REFERENCE PLANE ** FOR SOLDER DIP LEAD FINISH, LEAD DIAMETER IS (.46.61).6 ±.5 (1.524±.127) DIA.18 ±.5 (4.572 ±.127) Z Package 3-Lead Plastic TO-92 (Similar to TO-226) (Reference LTC DWG # ).18 ±.5 (4.572 ±.127).9 (2.286) NOM.5 (12.7) MIN.5 NCONTROLLED (1.27) LEAD DIMENSION MAX 5 NOM.5 (1.27) BSC.16 ±.3 (.46 ±.76).6 ±.1 (1.524 ±.254).14 ±.1 (3.556 ±.127).15 ±.2 (.381 ±.51) Z3 (TO-92) /.4 ( /.1) 2 PLCS TO-92 TAPE AND REEL REFER TO TAPE AND REEL SECTION OF LTC DATA BOOK FOR ADDITIONAL INFORMATION 1 NOM 6
7 PACKAGE DESCRIPTIO S8 Package 8-Lead Plastic Small Outline (Narrow.15 Inch) (Reference LTC DWG # ) * ( ) ( ) ** ( ) SO ( ).1.2 ( ) 45 8 TYP ( ).4.1 ( ).16.5 ( ) * DIMENSION DOES NOT INCLDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED.6" (.152mm) PER SIDE ** DIMENSION DOES NOT INCLDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED.1" (.254mm) PER SIDE ( ) TYP.5 (1.27) BSC Information furnished by Linear Technology Corporation is believed to be accurate and reliable. However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights. 7
8 TYPICAL APPLICATIO S Micropower Reference for 9V Battery 1.2V Reference from 1.5V Battery 9V 51k 1.23V LM V 3k 1.23V LM /285/385 TA2 185/285/385 TA3 RELATED PARTS PART NMBER DESCRIPTION COMMENTS LT Micropower Shunt Reference.3% Initial Accuracy LT V Micropower Shunt Reference 4ppm/ C Max Temperature Coefficient fa LT/CP K REV A PRINTED IN SA Linear Technology Corporation 163 McCarthy Blvd., Milpitas, CA (48) FAX: (48) LINEAR TECHNOLOGY CORPORATION 1985
DESCRIPTIO FEATURES APPLICATIO S TYPICAL APPLICATIO. LT1180A/LT1181A Low Power 5V RS232 Dual Driver/Receiver with 0.1µF Capacitors
FEATRES APPLICATIO S ESD Protection over ±kv ses Small Capacitors: kbaud Operation for R L = k, C L = pf kbaud Operation for R L = k, C L = pf Outputs Withstand ±V Without Damage CMOS Comparable Low Power:
LTC1390 8-Channel Analog Multiplexer with Serial Interface U DESCRIPTIO
FEATRES -Wire Serial Digital Interface Data Retransmission Allows Series Connection with Serial A/D Converters Single V to ±V Supply Operation Analog Inputs May Extend to Supply Rails Low Charge Injection
DESCRIPTION FEATURES TYPICAL APPLICATION. LT1097 Low Cost, Low Power Precision Op Amp APPLICATIONS
LT97 Low Cost, Low Power Precision Op Amp FEATRES Offset Voltage µv Max Offset Voltage Drift µv/ C Max Bias Current pa Max Offset Current pa Max Bias and Offset Current Drift pa/ C Max Supply Current µa
APPLICATIO S TYPICAL APPLICATIO. LTC5507 100kHz to 1GHz RF Power Detector FEATURES DESCRIPTIO
00kHz to GHz RF Power Detector FEATRES Temperature Compensated Internal Schottky Diode RF Detector Wide Input Power Range: 34dBm to 4dBm ltra Wide Input Frequency Range: 00kHz to 000MHz Buffered Output
DESCRIPTIO. LT1226 Low Noise Very High Speed Operational Amplifier
FEATRES Gain of Stable GHz Gain Bandwidth V/µs Slew Rate.6nV/ Hz Input Noise Voltage V/mV Minimum DC Gain, R L = Ω mv Maximum Input Offset Voltage ±V Minimum Output Swing into Ω ide Supply Range ±.V to
FEATURES DESCRIPTIO APPLICATIO S. LTC1451 LTC1452/LTC1453 12-Bit Rail-to-Rail Micropower DACs in SO-8 TYPICAL APPLICATIO
12-Bit Rail-to-Rail Micropower DACs in SO-8 FEATRES 12-Bit Resolution Buffered True Rail-to-Rail Voltage Output 3V Operation (LTC1453), I CC : 250µA Typ 5V Operation (), I CC : 400µA Typ 3V to 5V Operation
How To Power A Power Generator With A Power Supply From A Powerstation
LT636 Over-The-Top Micropower Rail-to-Rail Input and Output Op Amp FEATRES Rail-to-Rail Input and Output Micropower: 5µA I Q, 44V Supply Operating Temperature Range: 4 C to 25 C Over-The-Top : Input Common
FEATURES APPLICATIO S. LTC1150 ±15V Zero-Drift Operational Amplifier with Internal Capacitors DESCRIPTIO TYPICAL APPLICATIO
FEATRES High Voltage Operation: ±1V No External Components Required Maximum Offset Voltage: 1µV Maximum Offset Voltage Drift:.5µV/ C Low Noise 1.8µV P-P (.1Hz to 1Hz) Minimum Voltage Gain: 15dB Minimum
DESCRIPTIO FEATURES FU CTIO AL BLOCK DIAGRA. LTC1655/LTC1655L 16-Bit Rail-to-Rail Micropower DACs in. SO-8 Package APPLICATIO S
FEATRES 16-Bit Monotonicity Over Temperature Deglitched Rail-to-Rail Voltage Output SO-8 Package I CC(TYP) : 6µA Internal Reference:.48V (LTC1655) 1.5V (LTC1655L) Maximum DNL Error: ±1LSB Settling Time:
APPLICATIO S TYPICAL APPLICATIO. LM134 Series Constant Current Source and Temperature Sensor FEATURES DESCRIPTIO
FEATES APPLICATIO S 1µA to 1mA Operation.2%/V egulation.8v to 4V Operating Voltage Can be sed as Linear Temperature Sensor Draws No everse Current Supplied in Standard Transistor Packages Current Mode
LTC1658 14-Bit Rail-to-Rail Micropower DAC in MSOP DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION
-Bit Rail-to-Rail Micropower DAC in MSOP FEATRES -Bit Resolution 8-Lead MSOP Package Buffered True Rail-to-Rail Voltage Output V or V Single Supply Operation Very Low Power: I CC(TYP) = 7µA Power-On Reset
LTC1443/LTC1444/LTC1445 Ultralow Power Quad Comparators with Reference. Features. Description. Applications. Typical Application
LTC/LTC/LTC Ultralow Power Quad Comparators with Reference Features n Ultralow Quiescent Current:.µA Max n Reference Output Drives.µF Capacitor n Adjustable Hysteresis (LTC/LTC) n Wide Supply Range Single:
FEATURES APPLICATIO S TYPICAL APPLICATIO. LTC1061 High Performance Triple Universal Filter Building Block DESCRIPTIO
FEATRES Three Filters in a Single Package p to th Order Filter Functions Center Frequency Range up to khz f O Q Product up to MHz Guaranteed Center Frequency and Q Accuracy Over Temperature Guaranteed
LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description
Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal
LT1109A Micropower DC/DC Converter Flash Memory VPP Generator Adjustable and Fixed 5V, 12V DESCRIPTIO
LT9A Micropower DC/DC Converter Flash Memory VPP Generator Adjustable and Fixed 5V, 2V FEATRE ses ff-the-helf Inductors Low Cost -Pin DIP or Package Fixed 5V or 2V utput or Adjustable Version nly Four
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator Description: The NTE923 and NTE923D are voltage regulators designed primarily for series regulator applications. By themselves, these devices
LTC1255 Dual 24V High-Side MOSFET Driver DESCRIPTIO
LTC1 Dual 24V High-Side MOSFET Driver FEATRES Fully Enhances N-Channel Power MOSFETs 12µA Standby Current Operates at Supply Voltages from 9V to 24V Short Circuit Protection Easily Protected Against Supply
LM185-2.5/LM285-2.5/LM385-2.5 Micropower Voltage Reference Diode
Micropower Voltage Reference Diode General Description The LM185-2.5/LM285-2.5/LM385-2.5 are micropower 2-terminal band-gap voltage regulator diodes. Operating over a 20 μa to 20 ma current range, they
APPLICATIO S BLOCK DIAGRA TYPICAL APPLICATIO. LT1025 Micropower Thermocouple Cold Junction Compensator FEATURES DESCRIPTIO
Micropower Thermocouple Cold Junction Compensator FEATRES 8µA Supply Current V to 36V Operation.5 C Initial Accuracy (A Version) Compatible with Standard Thermocouples (E, J, K, R, S, T) Auxiliary Output
DESCRIPTIO FEATURES. LT1787/LT1787HV Precision, High Side Current Sense Amplifiers APPLICATIO S TYPICAL APPLICATIO
Precision, High Side Current Sense Amplifiers FEATURES Input Offset oltage: µ (Max) upply Operation (LTH) -Bit Dynamic Range Operating Current: µa User-Selectable External Sense Resistor Bidirectional
FEATURES APPLICATIO S TYPICAL APPLICATIO. LTC1754-3.3/LTC1754-5 Micropower, Regulated 3.3V/5V Charge Pump with Shutdown in SOT-23 DESCRIPTIO
LTC74-./LTC74- Micropower, Regulated.V/V Charge Pump with Shutdown in SOT- FEATRES ltralow Power: I IN = µa Regulated Output Voltage:.V ±4%, V ±4% V Output Current: ma (.V).V Output Current: 4mA (.V) No
LT1129/LT1129-3.3/LT1129-5 Micropower Low Dropout Regulators with Shutdown DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION
FEATURES n 4m Dropout oltage n 7mA Output Current n 5μA Quiescent Current n No Protection Diodes Needed n Adjustable Output from 3.8 to 3 n 3.3 and 5 Fixed Output oltages n Controlled Quiescent Current
LM135-LM235-LM335. Precision temperature sensors. Features. Description
Precision temperature sensors Features Directly calibrated in K 1 C initial accuracy Operates from 450µA to 5mA Less than 1Ω dynamic impedance TO-92 (Plastic package) Description The LM135, LM235, LM335
Advanced Monolithic Systems
Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%
CA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA without External Pass Transistors. Features.
CA73, CA73C Data Sheet April 1999 File Number 788. Voltage Regulators Adjustable from V to 37V at Output Currents Up to 1mA without External Pass Transistors The CA73 and CA73C are silicon monolithic integrated
FEATURES DESCRIPTIO APPLICATIO S. LTC3490 Single Cell 350mA LED Driver TYPICAL APPLICATIO
Single Cell 350mA Driver FEATRES 350mA Constant Current Output 2.8V to 4V Output Compliance 1- or 2-Cell NiMH or Alkaline Input Synchronous Rectification: p to 90% Efficiency Fixed Frequency Operation:
LM78XX Series Voltage Regulators
LM78XX Series Voltage Regulators General Description Connection Diagrams The LM78XX series of three terminal regulators is available with several fixed output voltages making them useful in a wide range
APPLICATIO S TYPICAL APPLICATIO. LT6000/LT6001/LT6002 Single, Dual and Quad, 1.8V, 13µA Precision Rail-to-Rail Op Amps FEATURES DESCRIPTIO
FEATRES Ideal for Battery-Powered Applications Low Voltage:.V to V Operation Low Current: µa/amplifier Max Small Packages: DFN, MSOP, SSOP Shutdown to.µa Max (LT, LTDD) Low Offset Voltage: µv Max Rail-to-Rail
FEATURES DESCRIPTIO APPLICATIO S TYPICAL APPLICATIO. LT1170/LT1171/LT1172 100kHz, 5A, 2.5A and 1.25A High Efficiency Switching Regulators
FEATRES Wide Input Voltage Range: 3V to 6V Low Quiescent Current: 6mA Internal 5A Switch (2.5A for LT1171, 1.25A for LT1172) Shutdown Mode Draws Only 5µA Supply Current Very Few External Parts Required
www.jameco.com 1-800-831-4242
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LF411 Low Offset, Low Drift JFET Input Operational Amplifier General Description
INTEGRATED CIRCUITS DATA SHEET. TDA7052 1 W BTL mono audio amplifier. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET TDA7052 1 W BTL mono audio amplifier File under Integrated Circuits, IC01 July 1994 GENERAL DESCRIPTION The TDA7052 is a mono output amplifier in a 8-lead dual-in-line (DIL)
APPLICATIO S TYPICAL APPLICATIO. LT1001 Precision Operational Amplifier DESCRIPTIO FEATURES
FEATRES Guaranteed Low Offset Voltage AM 5µV max C µv max Guaranteed Low Drift AM.µV/ C max C.µV/ C max Guaranteed Low Bias Current AM na max C na max Guaranteed CMRR AM db min C db min Guaranteed PSRR
Description. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP
1.2 V to 37 V adjustable voltage regulators Description Datasheet - production data TO-220 TO-220FP The LM217, LM317 are monolithic integrated circuits in TO-220, TO-220FP and D²PAK packages intended for
High Common-Mode Rejection. Differential Line Receiver SSM2141. Fax: 781/461-3113 FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection
a FEATURES High Common-Mode Rejection DC: 00 db typ 60 Hz: 00 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.00% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements
AS2815. 1.5A Low Dropout Voltage Regulator Adjustable & Fixed Output, Fast Response
1.5A Low Dropout oltage Regulator Adjustable & Fixed Output, Fast Response FEATURES Adjustable Output Down To 1.2 Fixed Output oltages 1.5, 2.5, 3.3, 5.0 Output Current of 1.5A Low Dropout oltage 1.1 Typ.
Precision, Unity-Gain Differential Amplifier AMP03
a FEATURES High CMRR: db Typ Low Nonlinearity:.% Max Low Distortion:.% Typ Wide Bandwidth: MHz Typ Fast Slew Rate: 9.5 V/ s Typ Fast Settling (.%): s Typ Low Cost APPLICATIONS Summing Amplifiers Instrumentation
1.5A Very L.D.O Voltage Regulator LM29150/29151/29152
FEATURES High Current Capability 1.5A Low Dropout Voltage 350mV Low Ground Current Accurate 1% Guaranteed Initial Tolerance Extremely Fast Transient Response Reverse-Battery and "Load Dump" Protection
High Voltage Current Shunt Monitor AD8212
High Voltage Current Shunt Monitor AD822 FEATURES Adjustable gain High common-mode voltage range 7 V to 65 V typical 7 V to >500 V with external pass transistor Current output Integrated 5 V series regulator
Application Note 142 August 2013. New Linear Regulators Solve Old Problems AN142-1
August 2013 New Linear Regulators Solve Old Problems Bob Dobkin, Vice President, Engineering and CTO, Linear Technology Corp. Regulators regulate but are capable of doing much more. The architecture of
DESCRIPTIO FEATURES APPLICATIO S. LT1615/LT1615-1 Micropower Step-Up DC/DC Converters in ThinSOT TYPICAL APPLICATIO
LT6/LT6- Micropower Step-p DC/DC Converters in ThinSOT FEATRES Low Quiescent Current: 0µA in Active Mode
LM134-LM234 LM334 THREE TERMINAL ADJUSTABLE CURRENT SOURCES. OPERATES from 1V to 40V
LM134-LM234 LM334 THREE TERMINAL USTABLE CURRENT SOURCES OPERATES from 1 to 40. 0.02% CURRENT REGULATION PROGRAMMABLE from 1µA to 10mA ±3% INITIAL ACCURACY DESCRIPTION The LM134/LM234/LM334 are 3-terminal
TYPICAL APPLICATIO LT1086
LT86 Series.5A Low Dropout Positive Regulators Adjustable and Fixed.85V, 3.3V, 3.6V, 5V, V FEATRES 3-Terminal Adjustable or Fixed.85V, 3.3V, 3.6V, 5V, V Output Current of.5a (.5A for LT86H) Operates Down
A I DM. W/ C V GS Gate-to-Source Voltage ± 12. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ±2 V * PD - 973A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 2. m R DSon) max @V GS = 2.V) 27. m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
LM833 LOW NOISE DUAL OPERATIONAL AMPLIFIER
LOW NOISE DUAL OPERATIONAL AMPLIFIER LOW VOLTAGE NOISE: 4.5nV/ Hz HIGH GAIN BANDWIDTH PRODUCT: 15MHz HIGH SLEW RATE: 7V/µs LOW DISTORTION:.2% EXCELLENT FREQUENCY STABILITY ESD PROTECTION 2kV DESCRIPTION
LM108 LM208 LM308 Operational Amplifiers
LM108 LM208 LM308 Operational Amplifiers General Description The LM108 series are precision operational amplifiers having specifications a factor of ten better than FET amplifiers over a b55 C toa125 C
A I DM. W/ C V GS Gate-to-Source Voltage ± 20. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ± 2 V R DSon) max @V GS = V) 24 m * PD - 9787A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 4 m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
Application Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
LM1084 5A Low Dropout Positive Regulators
5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as
L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description
L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition
LM118/LM218/LM318 Operational Amplifiers
LM118/LM218/LM318 Operational Amplifiers General Description The LM118 series are precision high speed operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They
DSC1001. Low-Power Precision CMOS Oscillator 1.8~3.3V. Features. General Description. Benefits. Block Diagram
DSC.8~.V LowPower Precision CMOS Oscillator General Description The DSC is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages
LM138 LM338 5-Amp Adjustable Regulators
LM138 LM338 5-Amp Adjustable Regulators General Description The LM138 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5A over a 1 2V to 32V output range
MMBZ52xxBLT1G Series, SZMMBZ52xxBLT3G. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
MMBZ5xxBLTG Series, SZMMBZ5xxBLTG Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed
LTC3026 1.5A Low Input Voltage VLDO Linear Regulator. Description. Features. Applications. Typical Application
Features n Input Voltage Range: 1.14V to 3.5V (with Boost Enabled) 1.14V to 5.5V (with External 5V Boost) n Low Dropout Voltage: 1mV at I = 1.5A n Adjustable Output Range:.4V to 2.6V n Output Current:
NCT65. Remote Trip Point Temperature Sensor with Overtemperature Shutdown
Remote Trip Point Temperature Sensor with Overtemperature Shutdown Description The is a low power temperature monitor housed in an MSOP8 package. It monitors the temperature of a remote thermal diode.
TL074 TL074A - TL074B
A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION
ICS650-01 SYSTEM PERIPHERAL CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-01 Description The ICS650-01 is a low-cost, low-jitter, high-performance clock synthesizer for system peripheral applications. Using analog/digital Phase-Locked Loop (PLL) techniques,
Last Time Buy. Deadline for receipt of LAST TIME BUY orders: April 30, 2011
Last Time Buy This part is in production but has been determined to be LAST TIME BUY. This classification indicates that the product is obsolete and notice has been given. Sale of this device is currently
MIC2940A/2941A. Features. General Description. Applications. Pin Configuration. 1.2A Low-Dropout Voltage Regulator
MIC294A/2941A 1.2A Low-Dropout oltage Regulator General Description The MIC294A and MIC2941A are bulletproof efficient voltage regulators with very low dropout voltage (typically 4 at light loads and 35
Symbol Parameter Value Unit V i-o Input-output Differential Voltage 40 V I O Output Current Intenrally Limited Top
LM117/217 LM317 1.2V TO 37V VOLTAGE REGULATOR OUTPUT VOLTAGE RANGE : 1.2 TO 37V OUTPUT CURRENT IN EXCESS OF 1.5A 0.1% LINE AND LOAD REGULATION FLOATING OPERATION FOR HIGH VOLTAGES COMPLETE SERIES OF PROTECTIONS
ISL6700. 80V/1.25A Peak, Medium Frequency, Low Cost, Half-Bridge Driver. Features. Ordering Information. Applications. Pinouts
ISL6700 Data Sheet FN9077.6 80V/1.25A Peak, Medium Frequency, Low Cost, Half-Bridge Driver The ISL6700 is an 80V/1.25A peak, medium frequency, low cost, half-bridge driver IC available in 8-lead SOIC and
LM1036 Dual DC Operated Tone/Volume/Balance Circuit
LM1036 Dual DC Operated Tone/Volume/Balance Circuit General Description The LM1036 is a DC controlled tone (bass/treble), volume and balance circuit for stereo applications in car radio, TV and audio systems.
TRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER. Features
DATASHEET ICS280 Description The ICS280 field programmable spread spectrum clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency
TL084 TL084A - TL084B
A B GENERAL PURPOSE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT IMPEDANCE
LT3482 90V Boost DC/DC Converter with APD Current Monitor U DESCRIPTIO FEATURES APPLICATIO S TYPICAL APPLICATIO
FEATRES High Output Voltage: p to 9V Integrated Schottky Diodes 48V, 8mA Internal Switch High Side Current Monitor Adjustable Switching Frequency: 65kHz or.mhz Wide Range:.5V to 6V Surface Mount Components
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
CA3420. Features. 0.5MHz, Low Supply Voltage, Low Input Current BiMOS Operational Amplifier. Applications. Functional Diagram. Ordering Information
CA Data Sheet October, FN.9.MHz, Low Supply Voltage, Low Input Current BiMOS Operational Amplifier The CA is an integrated circuit operational amplifier that combines PMOS transistors and bipolar transistors
CS8481. 3.3 V/250 ma, 5.0 V/100 ma Micropower Low Dropout Regulator with ENABLE
3.3 /250 ma, 5.0 /100 ma Micropower Low Dropout Regulator with The CS8481 is a precision, dual Micropower linear voltage regulator. The switched 3.3 primary output ( OUT1 ) supplies up to 250 ma while
LM2704 Micropower Step-up DC/DC Converter with 550mA Peak Current Limit
Micropower Step-up DC/DC Converter with 550mA Peak Current Limit General Description The LM2704 is a micropower step-up DC/DC in a small 5-lead SOT-23 package. A current limited, fixed off-time control
AAT4280 Slew Rate Controlled Load Switch
General Description Features SmartSwitch The AAT4280 SmartSwitch is a P-channel MOSFET power switch designed for high-side load switching applications. The P-channel MOSFET device has a typical R DS(ON)
NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features
NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices
STLM20. Ultra-low current 2.4 V precision analog temperature sensor. Features. Applications
Ultra-low current 2.4 V precision analog temperature sensor Features Precision analog voltage output temperature sensor ±1.5 C maximum temperature accuracy at 25 C (±0.5 C typical) Ultra-low quiescent
CAT4101TV. 1 A Constant-Current LED Driver with PWM Dimming
A Constant-Current LED Driver with PWM Dimming Description The CAT4 is a constant current sink driving a string of high brightness LEDs up to A with very low dropout of.5 V at full load. It requires no
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
CMOS Switched-Capacitor Voltage Converters ADM660/ADM8660
CMOS Switched-Capacitor Voltage Converters ADM66/ADM866 FEATURES ADM66: Inverts or Doubles Input Supply Voltage ADM866: Inverts Input Supply Voltage ma Output Current Shutdown Function (ADM866) 2.2 F or
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. LT5 ltralow Noise, Low Distortion, Audio Op Amp FEATRES Voltage Noise:.nV/
FEATURES DESCRIPTIO APPLICATIO S. LT1618 Constant-Current/ Constant-Voltage 1.4MHz Step-Up DC/DC Converter TYPICAL APPLICATIO
LT68 Constant-Current/ Constant-Voltage.MHz Step-p DC/DC Converter FEATRES Accurate Input/Output Current Control: ±5% Over Temperature Accurate Output Voltage Control: ±% Wide Range:.6V to 8V.MHz Switching
C1 LT1611 APPLICATIO S TYPICAL APPLICATIO. Inverting 1.4MHz Switching Regulator in SOT-23 DESCRIPTIO
Inverting 1.4MHz Switching Regulator in SOT-23 FEATRES Very Low Noise: 1mV P P Output Ripple 5V at 150mA from a 5V Input Better Regulation Than a Charge Pump Effective Output Impedance: 0.14Ω ses Tiny
Kit 27. 1W TDA7052 POWER AMPLIFIER
Kit 27. 1W TDA7052 POWER AMPLIFIER This is a 1 watt mono amplifier Kit module using the TDA7052 from Philips. (Note, no suffix.) It is designed to be used as a building block in other projects where a
ICS514 LOCO PLL CLOCK GENERATOR. Description. Features. Block Diagram DATASHEET
DATASHEET ICS514 Description The ICS514 LOCO TM is the most cost effective way to generate a high-quality, high-frequency clock output from a 14.31818 MHz crystal or clock input. The name LOCO stands for
LT3092 200mA 2-Terminal Programmable Current Source FEATURES DESCRIPTION
FEATURES n Programmable 2-Terminal Current Source n Maximum Output Current: 2mA n Wide Input Voltage Range: 1.2V to 4V n Input/Output Capacitors Not Required n Resistor Ratio Sets Output Current n Initial
FEATURES APPLICATIO S. LTC1060 Universal Dual Filter Building Block DESCRIPTIO TYPICAL APPLICATIO
FEATURES Guaranteed Filter Speciication or ±.7V and ±5V Supply Operates Up to khz Low Power and 88dB Dynamic Range at ±.5V Supply Center Frequency Q Product Up to.mhz Guaranteed Oset Voltages Guaranteed
FEATURES DESCRIPTIO. LT1073 Micropower DC/DC Converter Adjustable and Fixed 5V, 12V APPLICATIO S TYPICAL APPLICATION
FEATRES No Design Required Operates at Supply Voltages from 1V to 30V Consumes Only 95µA Supply Current Works in Step-p or Step-Down Mode Only Three External Off-the-Shelf Components Required Low-Battery
LM56 Dual Output Low Power Thermostat
Dual Output Low Power Thermostat General Description The LM56 is a precision low power thermostat. Two stable temperature trip points (V T1 and V T2 ) are generated by dividing down the LM56 1.250V bandgap
INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 May 1992 GENERAL DESCRIPTION The is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components
High Precision TCXO / VCTCXO Oscillators
Available at Digi-Key** www.digikey.com High Precision TCXO / VCTCXO Oscillators 2111 Comprehensive Drive Phone: 60-81- 722 Fax: 60-81- 00 US Headquarters: 60-81-722 European Headquarters: +-61-72221 Description:
1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
LM117 LM317A LM317 3-Terminal Adjustable Regulator
LM117 LM317A LM317 3-Terminal Adjustable Regulator General Description The LM117 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1 5A over a 1 2V to 37V
LF412 Low Offset Low Drift Dual JFET Input Operational Amplifier
LF412 Low Offset Low Drift Dual JFET Input Operational Amplifier General Description These devices are low cost high speed JFET input operational amplifiers with very low input offset voltage and guaranteed
How To Control A Power Supply On A Powerline With A.F.F Amplifier
INTEGRATED CIRCUITS DATA SHEET Sound I.F. amplifier/demodulator for TV File under Integrated Circuits, IC02 March 1986 GENERAL DESCRIPTION The is an i.f. amplifier with a symmetrical FM demodulator and
TDA2040. 20W Hi-Fi AUDIO POWER AMPLIFIER
20W Hi-Fi AUDIO POWER AMPLIFIER DESCRIPTION The TDA2040 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. Typically it provides 22W output power
DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION. LT1161 Quad Protected High-Side MOSFET Driver
Quad Protected High-Side MOSFET Driver FEATRES Fully Enhances N-Channel MOSFET Switches V to V Power Supply Range Protected from 5V to V Supply Transients Individual Short-Circuit Protection Individual
High-Bandwidth, Low Voltage, Dual SPDT Analog Switches
DG, DG High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG/DG are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage,
1.5A Ultra Low Dropout Linear Regulator TJ3965
FEATURES Ultra Low Dropout Voltage Low Ground Pin Current Excellent Line and Load Regulation Guaranteed Output Current of 1.5A Available in MSOP8, SOP8, SOP8PP, SOT223, TO252, TO263, TO220, and SOT89 Packages
Low Noise, Precision, High Speed Operational Amplifier (A VCL > 5) OP37
a FEATURES Low Noise, 80 nv p-p (0.1 Hz to 10 Hz) 3 nv/ Hz @ 1 khz Low Drift, 0.2 V/ C High Speed, 17 V/ s Slew Rate 63 MHz Gain Bandwidth Low Input Offset Voltage, 10 V Excellent CMRR, 126 db (Common-Voltage
Low Cost Instrumentation Amplifier AD622
Data Sheet FEATURES Easy to use Low cost solution Higher performance than two or three op amp design Unity gain with no external resistor Optional gains with one external resistor (Gain range: 2 to 000)
STGW40NC60V N-CHANNEL 50A - 600V - TO-247 Very Fast PowerMESH IGBT
N-CHANNEL 50A - 600V - TO-247 Very Fast PowerMESH IGBT Table 1: General Features STGW40NC60V 600 V < 2.5 V 50 A HIGH CURRENT CAPABILITY HIGH FREQUENCY OPERATION UP TO 50 KHz LOSSES INCLUDE DIODE RECOVERY
PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages
DESCRIPTION The µa71 is a high performance operational amplifier with high open-loop gain, internal compensation, high common mode range and exceptional temperature stability. The µa71 is short-circuit-protected
iw1697 Product Brief Low-Power Off-Line Digital Green-Mode PWM Controller Description Applications
.0 Features Primary-side feedback eliminates opto-isolators and simplifi es design No-load power consumption < 0 mw at 0 V with ac typical application circuit ( star rating) Active start-up scheme enables
STLQ015. 150 ma, ultra low quiescent current linear voltage regulator. Description. Features. Application
150 ma, ultra low quiescent current linear voltage regulator Description Datasheet - production data Features SOT23-5L Input voltage from 1.5 to 5.5 V Very low quiescent current: 1.0 µa (typ.) at no load