LP Wizard (Land Pattern Wizard)
|
|
|
- Arnold Boone
- 7 years ago
- Views:
Transcription
1 LP Wizard (Land Pattern Wizard) June 2010 SH Lee SDD Application Engineer. Oct
2 What is a Land Pattern? The conductive pattern on a PC board used for the attachment and electrical connection of a compatible surfacemount or through-hole device Also known as a footprint, decal, cell, model, CAD library part, etc. Land Pattern is the IPC standards term Used for attaching electronic component assemblies More than 500,000 different component packages exist Every unique component package requires a unique land pattern 2
3 Creating Land Patterns: How Hard Could it Be? QFN Component Package Silkscreen Pin 1 Polarity Assembly Pin 1 Polarity Post Assembly Dot Located by Pin 1 Visible After Assembly 80% Paste Mask Reduction on all Lands 3D Model Outline Maximum Body Size Thermal Pad 0.25mm Silk to Land Gap Automatic DRC Checked 2mm Thermal to Land Gap DRC Checked 2mm Land to Land Gap DRC Checked Perfect IPC Land Sizes Center of Gravity Origin 75um Solder Mask Swell on all Lands 40% Paste Reduction on Thermal Pad Broken Into Squares IPC Placement Courtyard 0.25mm External Boundary 2 Ref Des Silkscreen and Assembly Drawing Silkscreen Outline Line Width 0.2mm Assembly Outline Nom or Max Body w/0.1mm Line Width 3
4 How Hard Could it Be? Very hard, if you re creating them by hand! Creating land patterns by hand is time-consuming and error-prone. It can take hours to create a single pattern! 4
5 LP Wizard: Perfect Land Patterns in 5 Minutes! PCB layout is not complete until CAD library parts are built Most PCB designers and EE engineers dread building CAD library parts With LP Wizard, building CAD library parts is as easy as 1, 2, 3 1 Enter Component Dimensions in Template and Auto-generate Land Pattern 2 Select LP Wizard Create Button 3 Import New Part Into CAD Tool 5
6 LP Wizard: Perfect Land Patterns in 5 Minutes! With LP Wizard, land patterns (footprints) are ready to use, with no post-creation clean up needed. With LP Wizard, you can build high-quality, perfect land patterns in a single day! 6
7 CAD Library Challenges: Compelling Reasons to Use LP Wizard Current process takes too long Use of current tools is labor intensive & prone to error New designs are delayed due to library-creation backlog Libraries can t keep up with industry standards IPC standards demand new land patterns for RoHS compliance Legacy libraries built in Imperial units need to be converted to Metric Fewer manufacturers provide recommended land patterns 7
8 CAD Library Challenges: Compelling Reasons to Use LP Wizard 8 Library creation is inefficient An old library needs an overhaul but is too big to handle A process change causes massive rework to re-generate the CAD library Component manufacturers continually create unique component packages, adding to the library-generation burden Duplicate work needed to support all design uses Components used in multiple environments (e.g., cell phone, computer, automotive) require unique land patterns for each use Duplicate effort needed to support multiple CAD systems
9 The Benefits of LP Wizard Saves time & is more accurate Template-based part creation is 89% faster than manual part creation Includes a starter library of 10,000+ components Output requires no clean up or additional data entry Builds the Part Library (PLB) database simultaneously Guarantees that land patterns meet industry standards LP Wizard is the only CAD librarygeneration tool approved by IPC Ensures conformance to all IPC rules, including RoHS 9
10 The Benefits of LP Wizard Improves efficiency Eliminates content duplication Powerful search by component dimensions or mfr part number Creates clean libraries & layout, with user-controlled results Land-pattern constraint rules provide exactly what users want Improves design aesthetics: better part placement, easier routing, higher-quality designs Aids assembly: CAD library includes post-processing data 10
11 If You Answer Yes to Any of These Questions, You Need LP Wizard! Are you tired of manually building CAD libraries? Are you in the process of switching CAD tools? Do you use multiple CAD tools? Is RoHS compliance a concern? Do you have multiple R&D locations that need to standardize on a single library format? Are you a service bureau that requires different CAD library rules? 11
12 If You Answer Yes to Any of These Questions, You Need LP Wizard! Do you have a CAD library that was built by multiple people using different construction techniques? Is your CAD library a mess? Are you an EE doing PCB layout? Are you transitioning from Imperial units to Metric units? Do you have a high volume of new PCB design layouts? Do you want to meet IPC Land Pattern standards? Are you a new Start-up? 12
13 What s Included in the LP Wizard? LP Viewer Provides access to a company s CAD library documentation LP Calculator Auto-generates accurate land patterns from component dimensions on manufacturers datasheets LP Librarian Creates CAD library documentation by saving component dimensions, design rules, & manufacturer attributes in a part library (PLB) file Saves user-definable attributes in the PLB, enabling users to search for parts using manufacturer datasheet text Single-Part CAD Export Wizard Outputs a calculated land pattern to virtually any CAD tool Each part is ready to use; no post-cleanup necessary OPTIONAL: Multi-Part CAD Export Wizard Mass-produce an entire library of unlimited parts in a PLB file Set custom rules and build entire library in minutes 13 Company Confidential
14 LP Viewer 14 Features Free download Complete library documentation tool Open PLB files created by LP Librarian Quick search-and-locate capabilities Find parts using component dimensions Find parts by Mfr. Package Description Find parts by Mfr. Case Code or Name Find LP names for schematic symbols Superimpose physical component with LP for visual accuracy and QC Turn layers on/off to see library details View dimensions & padstack information View design rules and statistical data Web link to manufacturers datasheets Print a datasheet in B&W or color Search Padstack View
15 LP Calculator Features Build IPC-7351B compliant CAD library parts Create customized parts from personal rule files Use inch, mil, mm, or micron units Pin controls: Relocate pin 1 to any pin Pin order clockwise or counter-clockwise Delete or hide pins Customize line widths & Ref Des sizes Unlimited solder & paste-mask controls Multiple pad shapes & rounded rectangle Toe, heel, & side solder-joint statistics Local fiducials for fine-pitch components Auto-generate LP & padstack names Min/Max or Nominal component dimensions 15
16 LP Librarian Features Saves component dimensions, design rules, and attributes in a library (PLB) file The Free LP Viewer provides access to PLB data Unlimited, user-definable attribute fields. Easily sort data for any attribute. Full spreadsheet editor with find/replace, undo/redo, add/delete rows & columns 16
17 Single-Part CAD Export Wizard Features Exports land patterns, one at a time, to all versions of the following CAD tools: Expedition PADS Layout Board Station Cadence Allegro & PCB Editor CADSTAR & CR-5000 Altium Designer (via PADS import) Pulsonix (via PADS import) P-CAD McCAD Pantheon NI Ultiboard Eagle OrCAD Layout Additional CAD exports coming! 17 Company Confidential
18 Multi-Part CAD Export Wizard Features LP Wizard includes 10,000 + component packages in multiple PLB files for SMT & PTH technology By adding the Multi-Part Wizard (MPW), you can: Define custom rules Create a library by mass-building all 10,000 parts Update rules files and regenerate new libraries as needed Switch CAD tools and regenerate a new library instantly, without translating 18 Company Confidential
19 Multi-Part CAD Export Wizard Create Libraries for Different Applications Mass-create libraries to meet different needs Flex circuits High density High shock Various solder techniques (wave solder, lead solder, lead-free) Change environment settings for different applications Least (cell phones) Nominal (desktop standard) Most (medical, mil/aero) User-customized Create unique rule sets for each application In minutes, translate a normal (standard) library to any rule set Service Bureaus can set up rules for each customer Easily maintain 100 land-pattern libraries using the same component dimensions 19 Company Confidential
20 Unique Print Capability Print Features Dimensions for: Land patterns Pin & padstack data Silkscreen data Assembly data Courtyard data Padstack names Environment setting used Land pattern name Solder joint goals Construction units used Advisories on rule violations No other tool can do this 20 Company Confidential
21 Return On Investment Reduce the time needed to build CAD libraries by up to 91%! Standard CAD Tool vs. LP Suite* LP Wizard won the IEC DesignVision Award for Best New PCB Design Tool in 2007 Full-featured, 30-day evaluation copy available online (Evaluation does not include Multi-Part CAD Export) * Data source: Benchmark by a large computer company, comparing the library-creation times of their current Allegro process with those of LP Wizard. 21 Company Confidential
22 LP Viewer & LP Wizard by Mentor Graphics 22 Company Confidential
23 23 Company Confidential
PCB Design Perfection Starts in the Cad Library Part 1 The 1608 (Eia 0603) Chip Component
PCB Design Perfection Starts in the Cad Library Part 1 The 1608 (Eia 0603) Chip Component Tom Hausherr EDA Library Product Manager Mentor Graphics Corp. tom_hausherr@mentor.com ABSTRACT The CAD library
The Universal PCB Design Grid System
The Universal PCB Design Grid System Abstract: Mixing PCB Design Layout units will compromise perfection every time. PCB Design perfection starts with building CAD library parts and quickly moves to part
IIB. Complete PCB Design Using OrCAD Capture and PCB Editor. Kraig Mitzner. ~»* ' AMSTERDAM BOSTON HEIDELBERG LONDON ^ i H
Complete PCB Design Using OrCAD Capture and PCB Editor Kraig Mitzner IIB ~»* ' AMSTERDAM BOSTON HEIDELBERG LONDON ^ i H NEW YORK * OXFORD PARIS SAN DIEGO ШШЯтИ' ELSEVIER SAN FRANCISCO SINGAPORE SYDNEY
PCB Design. Gabe A. Cohn. May 2010. Using Altium Designer/DXP/Protel. Electrical Engineering University of Washington
PCB Design Using Altium Designer/DXP/Protel Gabe A. Cohn May 2010 Electrical Engineering University of Washington Printed Circuit Board Steps 1. Draw schematics 2. Attach footprints for all components
OrCad Layout Plus PCB Tutorial
OrCad Layout Plus PCB Tutorial R. B. Reese (9/2005), ECE, MSU. RBR/V 0.5 1 OrCad Layout Plus PCB Tutorial This is a simple tutorial of OrCAD PCB using a two-layer PCB with throughhole components. The design
Improve PCB Layout with Skill Utility Programs
Improve PC Layout with Skill Utility Programs rbel Nissan, COO, Nistec Design Published at PCD&F Magazine, May 2008 Faster time to market is crucial in the development and manufacturing of every new product.
DFA (Design For Assembly) This Application Note describes how to use the DFA functionality and the different settings.
Title: Product: Summary: DFA (Design For Assembly) Allegro PCB Designer This describes how to use the DFA functionality and the different settings. Author/Date: Marco Waller / 19.11.2011 Table of Contents
Be the best. PCBA Design Guidelines and DFM Requirements. Glenn Miner Engineering Manager March 6, 2014 DFM DFT. DFx DFC DFQ
and DFM Requirements DFM DFQ DFx DFT DFC Glenn Miner Engineering Manager Electronics, Inc. Not to be reproduced or used in any means without written permission by Benchmark. Guidelines and Requirements
PCB Artist Tutorial:
Derek Brower browerde@msu.edu Capstone Design Team 6 PCB Artist Tutorial: Printed Circuit Board Design Basics N o v e m b e r 1 4, 2 0 1 2 P C B B a s i c s P a g e 1 Abstract PCB Artist is a schematic
Improved Allegro to Pro/E Bidirectional Data Exchange
Improved Allegro to Pro/E Bidirectional Data Exchange CDN Live! Silicon Valley 2007 Session 7.2 Michael Wilson, Dell Inc. Andreas Kulik, PTC Agenda Introduction Data Representation Translation Process
PCB Board Design. PCB boards. What is a PCB board
PCB Board Design Babak Kia Adjunct Professor Boston University College of Engineering Email: bkia -at- bu.edu ENG SC757 - Advanced Microprocessor Design PCB boards What is a PCB board Printed Circuit Boards
Using CAD Data in Assembly - Advantages and Pitfalls
Using CAD Data in Assembly - Advantages and Pitfalls For years, electronic engineers and circuit board designers have shared information between their computer-aided-engineering (CAE) and computer-aided-design
Wurth Electronics Midcom Altium Library Training Module Altium Designer layout software and the Wurth Electronics Midcom Altium libraries
Wurth Electronics Midcom Altium Library Training Module Altium Designer layout software and the Wurth Electronics Midcom Altium libraries www.we-online.com/midcom Slide 1 Contents Overview of Altium Designer
A Program for PCB Estimation with Altium Designer
A Program for PCB Estimation with Altium Designer By: Steve Hageman AnalogHome.com One thing that I have had to do over and over on my new PCB jobs is to make an estimate of how long I think the layout
Complete. PCB Design Using. NI Multisim, NI Ultiboard, LPKF CircuitCAM and BoardMaster. pg. 1. Wei Siang Pee
Complete Wei Siang Pee PCB Design Using NI Multisim, NI Ultiboard, LPKF CircuitCAM and BoardMaster pg. 1 Introduction Multisim equips educators, students, and professionals with the tools to analyze circuit
Graser User Conference Only
Miniaturization- Rigid-Flex Design with Allegro Jonathan Lee / Graser 31/Oct/2014 Rigid-Flex Design with Allegro Miniaturization Design Miniaturization through Rigid-Flex Rigid-Flex Design Flow Miniaturization
Detailed information about Gerber, NC Drill and NC Route.
Title: Product: Summary: Manufacturing Output OrCAD / Allegro PCB Editor Detailed information about Gerber, NC Drill and NC Route. Author/Date: Beate Wilke / 27.05.2009 Table of Contents 1 Gerber... 2
Importing and Exporting Design Files. Contents
Importing and Exporting Design Files Contents Supported Import File Formats Importing via the File»Open Command Importing into the active document using the File»Import command Importing via the Import
Altium Designer Guide
Electronics and Computer Systems Engineering Altium Designer Guide Tutorial part 2 PCB Design This is Part 2 of a beginner s guide to PCB design using Altium Designer and is geared towards the following
Introducing CAM350 a Complete PCB Fabrication Flow for Both PCB Designers and PCB Fabricators.
The challenge for today s electronic product manufacturers is clear send better products to market faster and more cost-effectively, before the competition. In order to meet that challenge, the entire
EECAD s MUST List MUST MUST MUST MUST MUST MUST MUST MUST MUST MUST
Customers are required to follow certain criteria for all designs whether they are ultimately done in EECAD or by the customers themselves. These criteria, approved by EES Management, are listed below:
CADENCE LAYOUT TUTORIAL
CADENCE LAYOUT TUTORIAL Creating Layout of an inverter from a Schematic: Open the existing Schematic Page 1 From the schematic editor window Tools >Design Synthesis >Layout XL A window for startup Options
Release Highlights for CAM350 Product Version 11.0
Release Highlights for CAM350 Product Version 11.0 Introduction CAM350 Version 11.0 is a major release that introduces new functionality, including Intelligent CAD Data DFM checks for Streams RC, IPC-2581
Executive Summary. Table of Contents
Executive Summary How to Create a Printed Circuit Board (PCB) Department of Electrical & Computer Engineering Michigan State University Prepared by: John Kelley Revision: 4/06/00 This application note
Guide to Designing and Fabricating Printed Circuit Boards
Guide to Designing and Fabricating Printed Circuit Boards Rev 1.0 University of Toronto January 2006 Contact for ECE496 students: Olivier Trescases trescas@vrg.utoronto.ca Outline Outline...2 Glossary...3
Orcad Layout. Autorouter User s Guide
Orcad Layout Autorouter User s Guide Copyright 1985-2000 Cadence Design Systems, Inc. All rights reserved. Trademarks Allegro, Ambit, BuildGates, Cadence, Cadence logo, Concept, Diva, Dracula, Gate Ensemble,
FlowCAD. FlowCAD Webinar. OrCAD / Allegro PCB Editor Tipps und Tricks. www.flowcad.de. www.flowcad.ch
FlowCAD Webinar OrCAD / Allegro PCB Editor Tipps und Tricks Print Screen from the Canvas Open Windows Explorer with the working folder Z-Copy: Copy a Shape to another Layer Z-Copy: Copy a Shape to more
Application Note: PCB Design By: Wei-Lung Ho
Application Note: PCB Design By: Wei-Lung Ho Introduction: A printed circuit board (PCB) electrically connects circuit components by routing conductive traces to conductive pads designed for specific components
Laboratory 2. Exercise 2. Exercise 2. PCB Design
Exercise 2. PCB Design Aim of the measurement Introducing to the PCB design Creating a schematic of an analog circuit, making simulations on it and designing a Printed circuit board for it. Keywords Printed
Aegis Software Required Data Forms. A Guide for Contract Assemblers in the Process of Obtaining BOM and CAD Data from their Customers
Aegis Software Required Data Forms A Guide for Contract Assemblers in the Process of Obtaining BOM and CAD Data from their Customers The following document has been developed and designed for import into
DFA ((Dynamic) Design For Assembly) This Application Note describes how to use the DFA functionality and the different settings.
Title: Product: Summary: DFA ((Dynamic) Design For Assembly) Allegro PCB Designer This describes how to use the DFA functionality and the different settings. Author/Date: Marco Waller / 19.11.2011 Update/Date:
Designing a Schematic and Layout in PCB Artist
Designing a Schematic and Layout in PCB Artist Application Note Max Cooper March 28 th, 2014 ECE 480 Abstract PCB Artist is a free software package that allows users to design and layout a printed circuit
PCB Design with Altium: Schematic Entry, Libraries, and Designing Components
PCB Design with Altium: Schematic Entry, Libraries, and Designing Components Alex Fosdick Capstone Senior Design Instructor: Tom Brown Edited: Jan 30th 2011 Description: This document is the first of two
Preface xiii Introduction xv 1 Planning for surface mount design General electronic products 3 Dedicated service electronic products 3 High-reliability electronic products 4 Defining the environmental
Steps to PCB design using Orcad.
Steps to PCB design using Orcad. 1. Design circuit using schematic entry package (Capture). 2. Generate netlist for PCB package. 3. Import netlist into PCB package (LayoutPlus). 4. Place components, route
Tutorials Drawing a 555 timer circuit
Step 1 of 10: Introduction This tutorial shows you how to make an electronic circuit using Livewire and PCB Wizard 3. You should follow this tutorial to learn the basic skills you will need to use Livewire
Net Ties and How to Use Them
Net Ties and How to Use Them Summary The Net Tie is a component type which allows for shorting together various nets in a design. The graphic for the symbol can be as simple as two component pins representing
FREE. www.designspark.com/pcb. Professional standard PCB design tool DesignSpark PCB. resources by
FREE DESIGNSPARK Professional standard PCB design tool DesignSpark PCB version 4 Unique resources by DesignSpark PCB is an award-winning professional software package for schematic capture and PCB layout,
Assembly of LPCC Packages AN-0001
Assembly of LPCC Packages AN-0001 Surface Mount Assembly and Handling of ANADIGICS LPCC Packages 1.0 Overview ANADIGICS power amplifiers are typically packaged in a Leadless Plastic Chip Carrier (LPCC)
Generating a Custom Bill of Materials
Summary Tutorial TU0104 (v2.3) May 16, 2008 This tutorial describes how to use the Report Manager to set up a Bill of Materials (BOM) report. The manipulation of data and columns and exporting to an Excel
What is surface mount?
A way of attaching electronic components to a printed circuit board The solder joint forms the mechanical and electrical connection What is surface mount? Bonding of the solder joint is to the surface
How to avoid Layout and Assembly got chas with advanced packages
How to avoid Layout and Assembly got chas with advanced packages Parts and pitch get smaller. Pin counts get larger. Design cycles get shorter. BGA, MicroBGA, QFN, DQFN, CSP packages are taking the design
PCB Project (*.PrjPcb)
Project Essentials Summary The basis of every design captured in Altium Designer is the project. This application note outlines the different kinds of projects, techniques for working on projects and how
Glass coloured glass may pick up on scan. Top right of screen tabs: these tabs will relocate lost windows.
Artec 3D scanner Instructions for Medium Handheld (MH) Scanner Scanning Conditions: Objects/surfaces that don t scan well: Black or shiny objects and objects with sharp edges or points, hair, glass, transparent
TINA. PCB Design Manual. DesignSoft. www.designsoftware.com
TINA PCB Design Manual DesignSoft www.designsoftware.com 7 2 CREATING A PRINTED CIRCUIT BOARD (PCB) Using TINA 7, you ve captured the schematic of your circuit and refined the design. It s time to make
Converting third-party designs to Allegro. Existing and not existing CAD Translators and/or methods of translation.
Title: Product: Summary: Converting third-party designs to Allegro OrCAD / Allegro PCB Editor Existing and not existing CAD Translators and/or methods of translation. Author/Date: Sylvia Holste / 30.Sep.2010
OrCAD Capture with CIS Option and Allegro DE CIS. It explains the whole Capture CIS environment.
Title: Product: Summary: Capture CIS Environment OrCAD Capture with CIS Option and Allegro DE CIS It explains the whole Capture CIS environment. Author/Date: Beate Wilke / 11.11.2009 Table of Contents
AOI Systems Limited Automated Optical Inspection
AOI Systems Limited Automated Optical Inspection First Article Inspection SS15000FA AOI Systems - First Article Inspection First Article Inspection The FA-Inspector is a scanner-based optical inspection
POWER FORUM, BOLOGNA 20-09-2012
POWER FORUM, BOLOGNA 20-09-2012 Convertitori DC/DC ad alta densità di potenza e bassa impedenza termica. Massimo GAVIOLI. Senior Field Application Engineer. Intersil SIMPLY SMARTER Challenges when Designing
Best Practices in PCB Design: Exporting Gerber Files
Page 1 of 5 Improve your ni.com experience. Login or Create Document Type: Tutorial NI Supported: Yes Publish Date: Mar 4, 2009 Best Practices in PCB Design: Exporting Gerber Files Overview This document
Customer Service Note Lead Frame Package User Guidelines
Customer Service Note Lead Frame Package User Guidelines CSN30: Lead Frame Package User Guidelines Introduction Introduction When size constraints allow, the larger-pitched lead-frame-based package design
Accelerometer and Gyroscope Design Guidelines
Application Note Accelerometer and Gyroscope Design Guidelines PURPOSE AND SCOPE This document provides high-level placement and layout guidelines for InvenSense MotionTracking devices. Every sensor has
EXPRESS PCB TUTORIAL Author: Lee Morey Revised: JE Feb 2015
EXPRESS PCB TUTORIAL Author: Lee Morey Revised: JE Feb 2015 Getting Started There are several resources for learning how to layout schematics and PCBs. And there are several popular commercial packages.
Release Highlights for CAM350 Product Version 10.2
Release Highlights for CAM350 Product Version 10.2 Introduction CAM350 Version 10.2.2 is a support release for CAM350. CAM350 10.2.2 includes support for Microsoft Windows 7 and Mentor PADS Layout version
Designing with High-Density BGA Packages for Altera Devices
2014.12.15 Designing with High-Density BGA Packages for Altera Devices AN-114 Subscribe As programmable logic devices (PLDs) increase in density and I/O pins, the demand for small packages and diverse
Trace Layer Import for Printed Circuit Boards Under Icepak
Tutorial 13. Trace Layer Import for Printed Circuit Boards Under Icepak Introduction: A printed circuit board (PCB) is generally a multi-layered board made of dielectric material and several layers of
SIMATIC IT Unicam Test Expert
NPI solutions for electronics Test engineering solutions for PCB Assembly: accelerated test and inspection SIMATIC IT Unicam Test Expert Answers for industry. Simatic IT for the electronics industry Simatic
10 ma LED driver in SOT457
SOT457 in SOT457 Rev. 1 20 February 2014 Product data sheet 1. Product profile 1.1 General description LED driver consisting of resistor-equipped PNP transistor with two diodes on one chip in an SOT457
Tanner EDA L-edit (Layout Editor)
Tanner EDA L-edit (Layout Editor) Tanner Tools Speeding Concept to Silicon EDA= Electronic Design and Automation NOTE: This tutorial was constructed in L-edit version 1.15 (c. October 2007) http://www.tanner.com/eda/
www.eurocircuits.com Page 1
CONTENT INTRODUCTION 2 INPUT DATA FORMATS 3 INPUT DATA REQUIREMENTS 4 CLASSIFICATION 6 HOLES 8 COPPER LAYERS 10 BGAS 12 MECHANICAL LAYER 13 SOLDERMASK 15 LEGEND PRINT 17 CARBON 18 PEEL-OFF MASK 19 VIAFILL
PCB Artist. Library Creation Tutorial
PCB Artist Library Creation Tutorial 2 PCB Artist Library Creation Tutorial Copyright Notice Copyright WestDev Ltd. 1997-2008 PCB Artist is a Trademark of Advanced Circuits. All rights reserved. E&OE Copyright
MicroStrategy Desktop
MicroStrategy Desktop Quick Start Guide MicroStrategy Desktop is designed to enable business professionals like you to explore data, simply and without needing direct support from IT. 1 Import data from
KiCad Step by Step Tutorial
KiCad Step by Step Tutorial Copyright 2006 David Jahshan: kicad at iridec.com.au 2011 Update Copyright 2011 Phil Hutchinson Copyright: Please freely copy and distribute (sell or give away) this document
Acceptability of Printed Circuit Board Assemblies
Section No.: 12I.2.3, Sheet 1 of 9 Rev Level: 16 Additional Distribution: PCB Assembly Subcontractors 1.0 Purpose 2.0 Scope Acceptability of Printed Circuit Board Assemblies 1.1 The purpose of this standard
PIN IN PASTE APPLICATION NOTE. www.littelfuse.com
PIN IN PASTE APPLICATION NOTE 042106 technical expertise and application leadership, we proudly introduce the INTRODUCTION The Pin in Paste method, also called through-hole reflow technology, has become
Webinar HDI Microvia Technology Cost Aspects
Webinar HDI Microvia Technology Cost Aspects www.we-online.com HDI - Cost Aspects Seite 1 1 July, 2014 Agenda - Webinar HDI Microvia Technology Cost Aspects Reasons for the use of HDI technology Printed
PCB Fabrication Services and Preparation
PCB Fabrication Services and Preparation RSGC ACES PCB Fabrication Service Providers Bittele Electronics Inc. Preparing Eagle Files For Production What is a Gerber RS-274X File? Short Wikipedia Spiel Creating
Copyrights. Software, documentation and related materials: Copyright 2002 Altium Limited
Library Executive Copyrights Software, documentation and related materials: Copyright 2002 Altium Limited This software product is copyrighted and all rights are reserved. The distribution and sale of
Creating tables in Microsoft Access 2007
Platform: Windows PC Ref no: USER 164 Date: 25 th October 2007 Version: 1 Authors: D.R.Sheward, C.L.Napier Creating tables in Microsoft Access 2007 The aim of this guide is to provide information on using
Using Stencils to Simplify the Printed Circuit Board Assembly Process
Using Stencils to Simplify the Printed Circuit Board Assembly Process Author: Nolan Johnson CAD/EDA Manager njohnson@sunstone.com The process of creating a prototype circuit board requires multiple phases
Quadcept Tutorial. Product Version 7.0.0 August 2014
Quadcept Tutorial Product Version 7.0.0 August 2014 About this tutorial This tutorial is designed to provide the user with an understanding of the basic operation of Quadcept, fundamentals of electronic
CadSoft EAGLE Version 7
CadSoft EAGLE Version 7 System Requirements EAGLE is a powerful graphics editor for designing PC-board layouts and schematics. In order to run EAGLE the following is required: Windows 7, or newer Linux
PCB Prototyping Machine. Auto Lab. Tutorial MITS Electronics
PCB Prototyping Machine Auto Lab Tutorial MITS Electronics REVISION: October 1, 2011 1st edition CONTENTS: Design Pro Applications Import Gerber Files Import Drill File Auto Drill Generate Outline Generate
CADSTAR Training Centre >>>
TrainingServices CADSTAR Training Centre >>> People. Knowledge. Innovation. Our role is driven by demand and vindicated by success. Commercially orientated training courses provided by Quadra Solutions
PRODUCTION-PROVEN PCB SCHEMATIC DESIGN ENTRY AND POWERFUL COMPONENT INFORMATION SYSTEM
TECH BRIEF CADENCE ORCAD CAPTURE CIS PRODUCTION-PROVEN PCB SCHEMATIC DESIGN ENTRY AND POWERFUL COMPONENT INFORMATION SYSTEM Cadence Capture CIS integrates robust schematic design capabilities with the
Notes for OrCAD PCB Designer
Notes for OrCAD PCB Designer Contents OrCad Capture Schematic Editor... 4 OrCad Directories... 4 Quick start and place components... 4 Adding Net Aliases... 4 Changing the size of a worksheet... 5 Label
Component, Model and Library Concepts. Components - the Basic Building Blocks. Modified by on 2-Jul-2014
Component, Model and Library Concepts Modified by on 2-Jul-2014 This article explains Altium Designer components, models and libraries, and their relationships. Approaches for identifying and managing
Automating Inter-Layer In-Design Checks in Rigid-Flex PCBs
Automating Inter-Layer In-Design Checks in Rigid-Flex PCBs By Ed Hickey, Product Engineering Director, Cadence Flexible PCBs (flex/rigid-flex) make it possible to create a variety of products that require
Component, Model and Library Concepts
Component, Model and Library Concepts Summary Article AR0104 (v2.0) June 07, 2006 This article defines components, models and libraries, and their relationships. The search sequence for locating models
Advanced LED Controller (LED Chaser)
Advanced LED Controller (LED Chaser) Introduction. Advanced LED controller (also known as LED Chaser) is microcontroller based circuit designed to produce various visual LED light effects by controlling
How To Make A Pb Design Guide For A Pcr (Dcfm) And Pb (Dfm) On A Pcb (Plb) On An Iphone Or Ipb (Pb) For A Powerbook
Your PCB layout First time right Smart menus & PCB visualizer DRC/DFM free online tools s Hertogenbosch 29 October 2014 Slide 1 PCB visualisation - Goals Help busy designers get boards on time accurate
P-Channel 20 V (D-S) MOSFET
Si30CDS P-Channel 0 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 0 0. at V GS = - 4.5 V - 3. 0.4 at V GS = -.5 V -.7 3.3 nc TO-36 (SOT-3) FEATURES Halogen-free According
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
Getting Started with PCB Design Studio (Concept HDL Version) Product Version 14.2 January 2002
(Concept HDL Version) Product Version 14.2 January 2002 1999-2002 Cadence Design Systems, Inc. All rights reserved. Printed in the United States of America. Cadence Design Systems, Inc., 555 River Oaks
Development of a Design & Manufacturing Environment for Reliable and Cost-Effective PCB Embedding Technology
Development of a Design & Manufacturing Environment for Reliable and Cost-Effective PCB Embedding Technology Outline Introduction CAD design tools for embedded components Thermo mechanical design rules
Allegro PCB Designer Manufacturing Option Powerful DFM checker, efficient documentation process, and intelligent panel design
Powerful DFM checker, efficient documentation process, and intelligent panel design Cadence Allegro PCB Designer Manufacturing Option is a comprehensive, powerful, easyto-use suite of tools that makes
23-26GHz Reflective SP4T Switch. GaAs Monolithic Microwave IC in SMD leadless package
CHS2411-QDG Description GaAs Monolithic Microwave IC in SMD leadless package The CHS2411-QDG (CHS2412-QDG, see Note) is a monolithic reflective SP4T switch in K-Band. Positive supply voltage only is required.
MID, Flexible Circuits or Printed Circuit Boards? Technology Selection Based on Virtual Prototypes. 1 MID Congress 2010
1 MID Congress 2010 Company Overview Company history 07/2003: Foundation by Dr. Thomas Krebs 09/2006: Named FlowCAD as distributor Product NEXTRA Innovative product technology Industries: Transportation,
ADVANCES IN AUTOMATIC OPTICAL INSPECTION: GRAY SCALE CORRELATION vs. VECTORAL IMAGING
ADVANCES IN AUTOMATIC OPTICAL INSPECTION: GRAY SCALE CORRELATION vs. VECTORAL IMAGING Vectoral Imaging, SPC & Closed Loop Communication: The Zero Defect SMD Assembly Line Mark J. Norris Vision Inspection
OurPCB Gerber Generation - Altium
OurPCB Gerber Generation - Altium Summary Each Gerber file corresponds to one layer in the physical board the component overlay, top signal layer, bottom signal layer, the solder masking layers and so
This presentation is courtesy of PCB3D.COM
Printed Circuit Board Design, Development and Fabrication Process This presentation is courtesy of PCB3D.COM Steve Rose Printed Circuit Board Design Engineer Slide 1 Introduction PCB 101 This presentation
PRINTED CIRCUIT BOARD SURFACE FINISHES - ADVANTAGES AND DISADVANTAGES
PRINTED CIRCUIT BOARD SURFACE FINISHES - ADVANTAGES AND DISADVANTAGES By Al Wright, PCB Field Applications Engineer Epec Engineered Technologies Anyone involved within the printed circuit board (PCB) industry
KiCad Step by Step Tutorial
KiCad Step by Step Tutorial Copyright 2006 David Jahshan: kicad at iridec.com.au Copyright: Please freely copy and distribute (sell or give away) this document in any format. Send any corrections and comments
Flexible Circuit Simple Design Guide
Flexible Circuit Simple Design Guide INDEX Flexible Circuit Board Types and Definitions Design Guides and Rules Process Flow Raw Material Single Side Flexible PCB Single Side Flexible PCB (Cover layer
Introduction to Microsoft Access 2013
Introduction to Microsoft Access 2013 A database is a collection of information that is related. Access allows you to manage your information in one database file. Within Access there are four major objects:
IN THE WORKSHOP Tip #14
IN THE WORKSHOP Tip #14 Smart Grid tools accelerate your component creation Summary May 2007 Author: Phil Loughhead Component creation is a fundamental part of the design process, and must be done accurately.
Suggested PCB Land Pattern Designs for Leaded and Leadless Packages, and Surface Mount Guidelines for Leadless Packages
APPLICATION NOTE Suggested PCB Land Pattern Designs for Leaded and Leadless Packages, and Surface Mount Guidelines for Leadless Packages Introduction This Application Note provides sample PCB land pattern
KSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
BGA - Ball Grid Array Inspection Workshop. Bob Willis leadfreesoldering.com
BGA - Ball Grid Array Inspection Workshop Bob Willis leadfreesoldering.com Mixed Technology Assembly Processes Adhesive Dispensing Component Placement Adhesive Curing Turn Boar Over Conventional Insertion
ENSURING ELECTROMAGNETIC COMPLIANCE IN PRINTED CIRCUIT BOARDS THROUGH DESIGN FOR ASSEMBLY GUIDELINES
ENSURING ELECTROMAGNETIC COMPLIANCE IN PRINTED CIRCUIT BOARDS THROUGH DESIGN FOR ASSEMBLY GUIDELINES Tom Page, *Paul Baguley and *Dirk Schaefer Department of Design & Technology, Loughborough University,