Contents // Home Collection

Transcription

1 Contents // Home Collection Kitchen and Storage Storage Systems Drawer Systems Waste Management Sinks & Taps 2-77 Laundry and Accessories Laundry baskets Laundry pull-outs Ironing Boards Living and Bedroom Wardrobe Systems Foldaway Bedding Home Entertainment LCD TV s and Lift System Audio / Video Storage Home Office Home Office Accessories Cable Organisation Desktop Organisation Ellipta Accessories Furniture Accessories Lighting Down Lighting LED lighting HHC

2 Kitchen and Storage Accessories 2 HHC.08

3 KITCHEN AND STORAGE ACCESSORIES pantry units base cabinet storage units wire storage drawers, baskets and shelves undersink storage corner cabinet systems towel racks wine racks drawer systems waste management sinks and taps HHC

4 dispensa pantry units 70 KG PULL OUT PANTRY UNIT Includes full extension bottom and top runner, height adjustable frame, door rails, front panel brackets and installation instructions packed into a single box for ease of handling Internal cabinet depth: 500 mm Load capacity: 70 kg Internal cab. height Internal cab. width Cat No. Silver mm 260 mm Silver mm 360 mm Upgrade to Soft Stopp dampening PULL-OUT PANTRY UNIT PULL-OUT PANTRY UNIT 100 KG PULL OUT PANTRY UNIT Includes full extension bottom and top runner, including Soft Stopp Plus, height adjustable frame, door rails, front panel brackets, and installation instructions Internal cabinet depth: 500 mm Load capacity: 100 kg Internal cab. height Internal cab. width Cat No. Brilliant white mm 260 mm Brilliant white mm 260 mm Brilliant white mm 260 mm Brilliant white mm 360 mm Brilliant white mm 360 mm Brilliant white mm 360 mm Silver mm 260 mm Silver mm 260 mm Silver mm 260 mm Silver mm 360 mm Silver mm 360 mm Silver mm 360 mm For additional baskets and accessories refer to pages 6 & HHC.08

5 swing pantry units PULL-OUT AND SWING PANTRY SET 70 KG SWING PANTRY Swings left or right when fully extended. Set includes full extension bottom and top runner, height adjustable frame with built-in dampener, front panel brackets and installation instructions Internal cabinet depth: Min. 500 mm Load capacity 70 kg Internal cab. height Internal cab. width Cat No. Brilliant white mm 260 mm Brilliant white mm 260 mm Brilliant white mm 260 mm Brilliant white mm 260 mm Brilliant white mm 260 mm Brilliant white mm 360 mm Brilliant white mm 360 mm Brilliant white mm 360 mm Brilliant white mm 360 mm Brilliant white mm 360 mm Silver mm 260 mm Silver mm 260 mm Silver mm 260 mm Silver mm 260 mm Silver mm 260 mm Silver mm 360 mm Silver mm 360 mm Silver mm 360 mm Silver mm 360 mm Silver mm 360 mm For additional baskets and accessories refer to pages 6 & 7 HHC

6 pantry unit accessories CLIP-ON ARENA STYLE SHELF SET : Coated particle board and chrome-plated steel Anti Slip base Internal cab. width 260 mm mm BOTTLE BASKET : Chrome-plated steel Internal cab. width 260 mm mm CLIP-ON ARENA SHELF : Coated particle board and Chrome-plated steel Anti Slip base Internal cab. width 260 mm mm HOOK-IN BASKET : Chrome-plated steel Internal cab. width 260 mm mm : White powder-coated steel Internal cab. width 260 mm mm HOOK-IN BASKET : Chrome-plated steel Internal cab. width 260 mm mm mm mm : White powder-coated steel Internal cab. width 260 mm mm CLIP-ON AKIS SHELF : Plastic aluminium Anti Slip base Internal cab. width 260 mm mm TRAY FOR HOOK-IN BASKET : White plastic Internal cab. width 260 mm mm HHC.08

7 pantry unit accessories BASKET SUPPORT 2 pieces required when pantry unit is extended Height: 125 mm : Powder coated, steel For cabinet width Silver RETAINING CLIP For hook-in baskets : Grey plastic CROSS BAR To clip onto the hook-in baskets : Chrome-plated steel with black plastic fixing clips For cabinet width 400 mm STORAGE CONTAINER SET For the storage of dry goods Set consists of: 1 grey support rail and 4 translucent plastic containers with grey lids Container capacity: 500 ml STORAGE TRAY SET For spices, packets and small pantry items Set consists of: 1 grey support rail and 2 translucent plastic containers HHC

8 tandem pantry units The Tandem was originally developed for 450, 500, and 600 mm cabinets. With kitchens becoming more than a cooking space the demand for larger storage became imperative. The Tandem Depot suit cabinet widths of 900, 1000 and 1200 mm. TANDEM PANTRY UNIT - TANDEM For cabinet widths between 450 and 600 mm. Complete set consists of runner, pull-out frame, trays/basket and doorshelf (trays/baskets). Including Soft Stopp damping system. Maximum load capacity rear shelf = 60 kg Maximum load capacity front shelf = 25 kg COMPLETE SETS SET ARENA STYLE All components in brilliant white; trays ARENA Style: gallery bright chrome, bottom Ice White with Anti Slip coating Min. Internal cabinet width 412 mm inside cabinet Number of height mm Trays 1100 each each Min. Internal cabinet width 462 mm 1100 each each Min. Internal cabinet width 562 mm 1100 each each SET ARENA CLASSIC all components in silver; trays ARENA Classic: gallery bright chrome, bottom Standard White with Anti Slip coating Min. Internal cabinet width 412 mm inside cabinet Number of height mm Trays 1100 each each Min. Internal cabinet width 462 mm 1100 each each Min. Internal cabinet width 562 mm 1100 each each SET WIRE BASKETS All components in silver; baskets: bright chrome Min. Internal cabinet width 412 mm inside cabinet Number of height mm Trays 1100 each each Min. Internal cabinet width 462 mm 1100 each each Min. Internal cabinet width 562 mm 1100 each each HHC.08

9 studio pantry units A B C D E STUDIO COMPLETE SETS A = Drawer H95 B = Inset drawer C = Pot drawer with railing D = Inset Pot drawer with railing E = Pot drawer with railing A + C + E are connected to the front Cabinet width 500 mm STUDIO PANTRY UNIT Includes full extension, soft-closing runners with 40 kg load capacity per drawer internal cab. width Cat. no. Stainless steel 468 mm Alu-metallic 468 mm White 468 mm HHC

10 pantry pull-out Twin sets in the kitchen. Coffee, sugar and milk to the right, cups and crockery to the left or vice-versa. With the Kesseböhmer pull-out pantry the choice is yours. Your personal theme can be created to best suit your special individual requirements. High cabinet or base cabinet, your choice... COMPLETE SETS PANTRY PULL-OUT Includes pull-out frame with Soft Stopp, 20 kg load capacity, 3 trays Arena Style Anti Slip coating Internal cabinet height: 870 mm Internal cab. width Brilliant white 380 mm Brilliant white 515 mm Brilliant white 650 mm PANTRY PULL-OUT Includes pull-out frame with Soft Stopp, 20 kg load capacity, 3 trays Arena Classic Anti Slip coating Internal cabinet height: 870 mm Internal cab. width Silver 380 mm Silver 515 mm Silver 650 mm PANTRY PULL-OUT Includes pull-out frame with Soft Stopp, 20 kg load capacity, 3 baskets, bright chrome polished Internal cabinet height: 870 mm Internal cab. width Silver 380 mm Silver 515 mm Silver 650 mm HHC.08

11 le mans full swing corner system Versatility in the kitchen. Depending on space, the Le Mans shelves can be placed in the cabinet at your discretion. Two, three or even four shelves can be placed above each other. The Le Mans highboard is a fine example of how the elegant ARENA design can transform simple crockery cabinets into fascinating high-end solutions. LE MANS CORNER SOLUTION Complete set includes mounting and drilling template. Maximum load capacity per shelf = 20 kg Left swivel unit shown COMPLETE SETS Left swivel shown LE MANS HIGHBOARD Left swivel shown SET ARENA STYLE All components in brilliant white; trays ARENA Style: gallery bright chrome, bottom Ice White with Anti Slip coating inside cabinet inside cabinet inside cabinet inside cabinet height (mm) dimensions (mm) dimensions (mm) dimensions (mm) W=860 x D=500 W=960 x D500 W=960 x D=500 Door width 450 Door width 500 Door width 600 number of trays Cat. No Cat. No Cat. No right swivel right swivel fix right swivel left swivel left swivel fix left swivel Option: Hinge damper set (2 pieces) SET ARENA CLASSIC All components in brilliant white; trays ARENA Classic: gallery bright chrome, bottom Standard White with Anti Slip coating inside cabinet inside cabinet inside cabinet inside cabinet height (mm) dimensions (mm) dimensions (mm) dimensions (mm) W=860 x D=500 W=960 x D=500 W=960 x D=500 Door width 450 Door width 500 Door width 600 number of trays Cat. No Cat. No Cat. No right swivel right swivel fix right swivel left swivel left swivel fix left swivel Option: Hinge damper set (2 pieces) HHC

12 magnia powerslide corner system Magnia Powerslide. These smooth, attractive, contoured carousel trays move independently of each other, offering full extension and fluid movement. Self and soft-close carousel trays pull directly out allowing full access to returning cabinets making for easy loading or unloading. Right hand unit shown COMPLETE SETS MAGNIA POWERSLIDE PULL-OUT CORNER UNIT Includes pole, 2 x Magnia Trays, built in Soft Stopp fitting, 20 kg load capacity per shelf For door width 450 mm. Cabinet width 1000 mm White silky gloss, chrome Left hand unit White silky gloss, chrome Right hand unit MAGNIA POWERSLIDE PULL-OUT CORNER UNIT Includes pole, 2 x Magnia Trays, built in Soft Stopp fitting, 20 kg load capacity per shelf For door width 500 mm. Cabinet width 1000 mm White silky gloss, chrome Left hand unit White silky gloss, chrome Right hand unit Grey silky gloss, chrome Left hand unit Grey silky gloss, chrome Right hand unit MAGNIA POWERSLIDE PULL-OUT CORNER UNIT Includes pole, 2 x Magnia Trays, built in Soft Stopp fitting, 20 kg load capacity per shelf For door width 600 mm. Cabinet width 1000 mm White silky gloss, chrome Left hand unit White silky gloss, chrome Right hand unit HHC.08

13 magic corner pull-out & rotating cabinets The corner cabinet door slides out and swivels to reveal the content within. Items from the back of the cupboard are now easily accessible. See every item in your kitchen cabinet and find exactly what you are looking for! MAGIC CORNER COMPLETE SETS This European design is ideal for left and right handed cupboards and glides effortlessly when opening or closing. Right hand versions shown above MAGIC CORNER BASKET SET Set ARENA Style with Soft Stopp All components in brilliant white; trays ARENA Style: gallery bright chrome, bottom Ice White with Anti Slip coating Inside cabinet dimensions (mm): W= x D=500 Right swivel Left swivel MAGIC CORNER ARENA SHELF SET Set ARENA Classic with Soft Stopp All components in brilliant white; trays ARENA Style: gallery bright chrome, bottom Ice White with Anti Slip coating Inside cabinet dimensions (mm): W= x D=500 Right swivel Left swivel MAGIC CORNER WIRE SHELF SET Set wire baskets with Soft Stopp All components in silver; baskets: bright chrome Inside cabinet dimensions (mm): W= x D=500 Right swivel Left swivel HHC

14 mondo II revolving corner units These revolving corner cabinet shelves allow the kitchen user a variety of choices and feature anti-slip bases, which help to stop pots and pans from moving when the shelves are rotated. Featuring a fully contoured back which prevents items from falling and jamming the mechanism. COMPLETE SETS MONDO 2K 3/4 REVOLVING CORNER UNIT Complete with cabinet, without doors Grey Anti Slip shelves for 90º angled doors Width across corners: 900 x 900 mm x 800 mm /4 REVOLVING CORNER UNIT Complete with cabinet, convex doors and white Anti Slip shelves Width across corners: 900 x 900 mm Door finish: stainless steel colour, smooth Door finish: aluminium colour, corrugated Timber chopping board optional TIMBER CHOPPING BOARD For convex shape revolving corner cabinet suitable for Mondo 2K : steamed beech HHC.08

15 mondo 2m revolving corner units The Mondo 2M is your complete corner storage solution. With a gentle push, the doors fold inwards and out of the way, the shelves glide effortlessly bringing the cupboard contents within easy reach. Doors gently soft-close into the closed position. Featuring a fully contoured back which prevents items from falling and jamming the mechanism. MONDO 2M CORNER CABINET 3/4 MONDO 2M CORNER CABINET Complete with cabinet, unassembled, without doors Grey shelves for 90º angled doors, 1950 mm cabinet width Width across corners: 900 x 900 mm COMPLETE SETS HHC

16 revo 90º revolving corner units Newly developed control mechanisms REVOfit and a rotation absorber enables a smooth train of motion through all phases from the soft retraction of the doors to automatic soft-closing. The closing speed can be adjusted without tools. Optimal space utilisation is provided by the adjustable shelves, with the allowance of an additional third shelf. The Round Solution for Corner Cabinets COMPLETE SETS Revo Softclose Mechanism 3/4 REVOLVING CORNER UNIT Complete set for corner cabinet with Arena Style Anti Slip base and Soft Stopp plus Set includes: Complete fitting set, top panel bracket and 2 x 3/4 circle revolving shelves with Anti Slip base 800 mm corner cabinet SET ARENA STYLE All components in silver; trays ARENA Style: Gallery bright chrome, bottom Ice White with Anti Slip coating 800 mm 900 mm number of trays SET ARENA CLASSIC All components in silver; trays ARENA Classic: Gallery bright chrome, bottom Standard White with Anti Slip coating 800 mm 900 mm number of trays SET WIRE BASKETS All components in silver; 2 x wire baskets, bright chrome polished 800 mm 900 mm number of trays ACCESSORIES LID RACK For storage of pot and pan lids on shelves Clip-on : Chrome-plated polished steel wire Dimensions (W x D x H): 450 x 150 x 40 mm DIVIDER To divide shelves for storage Clip-on : Chrome-plated polished steel wire Dimensions (W x D x H): 370 x 370 x 150 mm HHC.08

17 ¾ revolving corner cabinet fittings COMPLETE SETS 3/4 REVOLVING CORNER UNIT Complete set corner cabinet with Arena Classic Anti Slip base Internal cabinet heights: mm Set includes: Complete fitting including spindle and 2 x 3/4 revolving shelves with Anti Slip base 800 mm corner cabinet mm corner cabinet /4 REVOLVING CORNER UNIT Complete set corner cabinet with wire baskets Set includes: Complete fitting set and 2 x 3/4 revolving chrome wire shelves 800 mm corner cabinet mm corner cabinet /4 REVOLVING CORNER UNIT Includes revolving fitting and 2 high impact revolving trays Height: mm Diameter mm Diameter mm HHC

18 ½ revolving corner fittings COMPLETE SETS SEMICIRCULAR REVOLVING CORNER FITTINGS AND SHELVES Includes: Revolving fitting, 2 white ARENA Anti Slip shelves and one door follower Height: 565 mm Radius: 750 mm Radius: 850 mm SEMICIRCULAR REVOLVING CORNER FITTINGS AND SHELVES Includes: Revolving fitting, 2 chrome-plated wire baskets and one door follower Height: mm Radius: 750 mm Radius: 850 mm SEMICIRCULAR REVOLVING CORNER FITTINGS AND SHELVES Includes: Revolving fitting, 2 grey plastic Anti Slip shelves and one door follower Height: 520 mm Radius: 750 mm Radius: 850 mm SEMICIRCULAR REVOLVING CORNER FITTINGS AND SHELVES Includes: revolving fitting, 2 white plastic shelves and one door follower Height: 520 mm Radius: 750 mm Radius: 850 mm HHC.08

19 base cabinet pull-out storage unit The Kesseböhmer 150 mm cabinets offer a welcome spacefiller. When near the oven, these units are the convenient solution for spices, baking trays, the indispensible tea-towel. The high quality chrome equipment lends even these smallest cabinets in a kitchen that special touch of elegance. BASE CABINET PULL-OUT CLASSIC Complete set with metal tray and built-in Soft Stopp dampening, 12 kg load capacity Inside cab. Number of trays height (mm) Additional dividers in CLASSIC COMPLETE SETS BASE CABINET PULL-OUT STYLE Complete set with metal trays and built-in Soft Stopp dampening, 12 kg load capacity Inside cab. Number of trays height (mm) Additional dividers base unit - STYLE TOWEL RAIL, PULL-OUT STYLE Complete set with metal trays and built-in Soft Stopp dampening, 12 kg load capacity Inside cab. height (mm) Towel rail pull-out - CLASSIC Inside cab. height (mm) BAKING TRAY, PULL-OUT STYLE Complete set with metal tray and built-in Soft Stopp dampening, 12 kg load capacity Inside cab. height (mm) Baking tray pull-out - CLASSIC Inside cab. height (mm) HHC

20 base cabinet pull-out storage unit The simplest solutions are often the most effective. The provisions of everyday life sometimes put our kitchens to the test. For example bread... The Kesseböhmer solution for this is a comfortable pull-out with a tough liner bag which contains the bread perfectly. In addition, drinks and other supplies find their ideal home. BREAD AND BOTTLE BASKET Complete set with full extension frame, 1 bottle rack, 2 baskets with 1 bag for bread. Soft Stopp dampener, 12 kg load capacity per shelf Inside cab. Inside cab. height (mm) width (mm) HHC.08

21 comfort base cabinet pull-out storage unit With pull-out base cabinet storage units, the entire depth of cabinet is within reach, helping to increase storage space. With your choice of two heights and four widths, baskets suit most cabinets. Full extension and built-in Soft Close dampener are standard features of the pull-out storage units. See page 22 for storage basket selection. EXTENSION FRAME Includes built-in Soft Stopp dampener Load capacity: 25 kg Width: 38 mm Depth: 470 mm : Powder coated silver, steel Left mounted Height 599 mm mm Right mounted Height 599 mm mm : Powder coated brilliant white Left mounted Height 599 mm mm Right mounted Height 599 mm mm FRONT BRACKET Includes 1 piece, 2 pieces required per frame : Powder coated silver, steel Angle : Brilliant white Left mounted Height 599 mm mm : Brilliant white Right mounted Height 599 mm mm HHC

22 comfort base cabinet pull-out storage unit COMFORT BASE STORAGE HOOK-IN STORAGE BASKET : Chrome-plated steel Dimensions (W x D x H) 110 x 470 x 75 mm x 470 x 75 mm x 470 x 75 mm x 470 x 75 mm HOOK-IN STORAGE BASKET For 45º angle : Chrome-plated steel Dimensions (W x D x H): 228 x 467 x 74 mm For angle 45º right º left HOOK-IN STORAGE SHELF SET With Anti Slip base - 2 shelf set : Arena Style, white coated particle board and polished chrome-plated steel Dimensions (W x D x H mm) 160 x 470 x x 470 x x 470 x HOOK-IN STORAGE SHELF With Anti Slip base : White coated particle board and polished chrome-plated steel Dimensions (W x D x H) 110 x 470 x 88 mm x 470 x 88 mm x 470 x 88 mm HOOK-IN STORAGE SHELF For 45º angle With Anti Slip base : White coated particle board and polished chrome-plated steel Dimensions (W x D x H): 228 x 470 x 88 mm For angle 45º right º left BOTTLE BASKET : Chrome-plated steel Internal cab. width 260 mm mm HHC.08

23 dispensa junior pantry units This practical mini pull-out Larder Unit offers height adjustable baskets and trays for easy reach to contents from above or either side. Personalise your storage organisation with your choice of two heights and five widths. AVAILABLE 2009 Full extension and Soft Stopp dampening are standard features of the Mini Larder Unit. DISPENSA JUNIOR DISPENSA JUNIOR SET Includes pull-out frame with Soft Stopp, 45 kg load capacity, 3 clip-on trays + 1 bottom tray in Arena style Anti Slip coating Minimum internal cabinet height: 630 mm Internal cab. width Brilliant white 260 mm Brilliant white 360 mm Brilliant white 410 mm Brilliant white 460 mm Brilliant white 560 mm Includes Bottle Rack DISPENSA JUNIOR SET Includes pull-out frame with Soft Stopp, 45 kg load capacity, 3 clip-on trays + 1 bottom tray in Arena Anti Slip coating Minimum internal cabinet height: 630 mm Internal cab. width Silver 260 mm Silver 360 mm Silver 410 mm Silver 460 mm Silver 560 mm DISPENSA JUNIOR SET Includes pull-out frame with Soft Stopp, 45 kg load capacity, 3 clip-on baskets + 1 bottom basket, bright chrome polished Minimum internal cabinet height: 630 mm Internal cab. width Silver 260 mm Silver 360 mm Silver 410 mm Silver 460 mm Silver 560 mm HHC

24 base cabinet storage drawers SPACING BAR For hinged doors 1 piece required per storage drawer used behind hinged doors White Chrome INTERNAL STORAGE DRAWER For behind front panel : Chrome-plated steel, galvanised runner with soft closing action and full extension For cabinet width 400 mm mm mm mm FRONT PANEL STORAGE DRAWER To attach to front panel : Chrome-plated steel, galvanised runners with soft closing action and full extension For cabinet width 400 mm mm mm mm INTERNAL STORAGE DRAWER For behind hinged doors : Chrome-plated steel, galvanised runners with soft closing action and full extension For cabinet width 450 mm mm mm Please order spacing bar separately. INTERNAL STORAGE DRAWER For behind front panel With white coated Anti Slip base, galvanised runner with soft closing action and full extension For cabinet width 400 mm mm mm mm FRONT PANEL STORAGE DRAWER To attach to front panel With white coated Anti Slip base, galvanised runner with soft closing action and full extension For cabinet width 400 mm mm mm mm INTERNAL STORAGE DRAWER For behind hinged doors With white coated Anti Slip base, galvanised runner with soft closing action and full extension For cabinet width 450 mm mm mm Please order spacing bar separately HHC.08

25 portero base cabinet storage unit PORTERO PORTERO CLEANING AGENT PULL-OUT Set component complete with base and dividers, fitted with Soft Stopp. : Silver/bright chrome inside cabinet inside cabinet height (mm) width min.180 mm number of baskets Cat. No min 400 mm PORTERO CLEANING AGENT PULL-OUT Set component complete with base and dividers, fitted with Soft Stopp. : Silver/bright chrome inside cabinet inside cabinet height (mm) width min.290 mm number of baskets Cat. No min 400 mm portable basket and basket without handle PORTERO CLEANING AGENT PULL-OUT Set component complete with base and dividers, fitted with Soft Stopp. : Silver/bright chrome inside cabinet inside cabinet height (mm) width min.290 mm number of baskets Cat. No min 511 mm portable basket 1 basket without handle and 1 swivel basket HHC

26 undersink & cooktop area storage Häfele offers a range of safety and storage products that do not compromise the design of today s modern kitchen. The cooktop area protector keeps children away from the hot surface, while the undersink storage with lock, keeps dangerous cleaning agents out of reach. COOKTOP PULL-OUT SHELF For mounting beneath cooktops without cabinets Includes safety-hooks Height: 40 mm Extension length: 365 mm Installation length: 530 mm : Chrome-plated steel Installation width 600 mm mm UNDERSINK PULL-OUT Can be used on right or left side Includes guide for screw-mounting Extension length: 335 mm : Chrome-plated steel Installation width 135 mm mm CLEANING AGENT STORAGE UNIT WITH LOCK Right or left mounted Includes guide Dimensions (W x L x H): 202 x 432 x 440 mm : Chrome-plated steel HHC.08

27 vario alu-line undersink pull-out storage unit The undersink pull-out storage is ideal for keeping everyday products organised but out of sight. With practical clips, the elements can be situated to individualise the unit and increase space-saving storage and organisation. UNDERSINK PULL-OUT UNIT Left or right hand installation Load capacity: 10 kg Extension: 500 mm Dimensions (W x D x H): 158 x 490 x 481mm : Aluminium with grey plastic parts UNDERSINK PULL-OUT UNIT Left or right hand installation Load capacity: 10 kg Extension: 500 mm Dimensions (W x D x H): 158 x 490 x 496 mm : Aluminium with grey plastic parts HHC

28 pull-out towel racks PULL-OUT TOWEL RACK Top or side mounted Includes extendible chrome-plated arms 2 arms arms PULL-OUT TOWEL RACK Undermount or side mounted Includes 2 extendible silver anodised arms PULL-OUT TOWEL RACK Undermount or side mounted Includes 3 extendible silver anodised arms SECCO-ALULINE TOWEL HOLDER Undermount or side mounted Suitable for right or left hand installation Includes silver-colour anodised aluminium arms 2 arms arms HHC.08

29 wire storage shelves WIRE SHELVES Complete with 1 shelf, 4 shelf supports and fixing screws Depth of rack: 260 mm Internal cabinet width mm 412/ / / / / / / Depth of rack: 445 mm Internal cabinet width mm 412/ / / / / / / Depth of rack: 490 mm External cabinet width mm WINE RACK Holds 30 bottles For screw fixing between panels Includes: fixing bolts and insert nuts Material: Steel wire : Chrome-plated, polished Size (W x H x D): 566 x 545 x 220 mm WINE RACK Holds 15 bottles For screw fixing to panel Material: Steel wire : Chrome-plated, polished Size (W x H x D): 260 x 624 x 185 mm HHC

30 foldaway and pull-out table fittings The simple design of foldaway fittings is an ideal way to increase the usable workspace area in your kitchen and provide a practical solution for storage. Use them to store your cutting boards, blender, toaster or juicer and gain more space for preparing meals and snacks. FOLDAWAY FITTING For kitchen appliances 10 kg load capacity Colour: white For cabinet width mm Top not included PULL-OUT TABLE FITTING Self-supporting with load capacity 100 kg For cabinet width 600 mm HHC.08

31 timber kitchen products The butcher s table makes for an ideal additional preparation area, complete with slide-out chopping board, serving tray, bottle rack and drawer. The castors allow the unit to be moved easily where it is needed most. BUTCHER S TABLE Includes drawer, chopping board, serving tray and bottle rack : rubberwood WIRE BASKET WITH RUNNERS : Steel, chrome-plated polished Cabinet Height Width (mm) 450 mm mm mm mm mm mm mm mm mm BALLBEARING BASKET RUNNERS : Steel, zinc-plated Length 400 mm HHC

32 timber kitchen products PULL-OUT WICKER BASKETS Wicker basket with beech timber frame For cabinet width 400 mm mm mm Order beech drawer runners separately STORAGE BASKET : white translucent with beech frame Cabinet width 450 mm mm mm Order beech drawer runners separately BEECH DRAWER RUNNERS For wicker baskets and chopping board Pre-drilled and lacquered Length: 449 mm PULL-OUT CHOPPING BOARD : Unfinished beech timber, with fish symbol For cabinet width 500 mm mm Order beech drawer runners separately 32 HHC.08

33 worktop support brackets WORKTOP SUPPORT BRACKET INCLINED TUBE : Chrome-plated Diameter: 50 mm For screw mounting to timber For gluing to glass WORKTOP SUPPORT BRACKET STRAIGHT TUBE : Chrome-plated Diameter: 50 mm For screw mounting to timber For gluing to glass GLASS ADHESIVE (NOT SHOWN) Rhodia 3B, silicon adhesive 310 ml tube HHC

34 swing up fittings SALICE SMOVE Contact us to find out more about which swing up fitting solution will best fit your design! Components for timber doors Upper timber door with lower 45 mm aluminium framed door SALICE FLAP Upper 45 mm aluminium framed door with lower timber door 45 mm aluminium framed doors 34 HHC.08

35 swing up fittings SYNCHRON Contact us to find out more about which swing up fitting solution will best fit your design! SYNCHRON FLAP FITTING : Aluminium, bright Excludes doors, mechanism only for timber and aluminium doors Cabinet height 600 mm mm SWING UP SWING OVER HORIZONTAL BIFOLD OVERHEAD FLAP For additional information on the complete range of Häfele door fittings please call HAFELE, contact your nearest Häfele Sales Office or simply visit HHC

36 SWING UP FLAP FITTING flap fittings FOR TIMBER FLAPS Material: Steel : Silver 2 gas loaded springs with force up to 380 N Panel weight: Max. 8.5 kg Concealed front fixing, screw fixing Max. internal cabinet width: 870 mm Spring force Weight 2 x 250 N 5.0 kg Max. internal cabinet width: 1170 mm Spring force Weight 2 x 320 N 7.0 kg Max. internal cabinet width: 1470 mm Spring force Weight 2 x 380 N 8.5 kg FOR ALUMINIUM FRAMED DOOR FLAPS Material: Steel : Silver 2 gas loaded springs with force up to 380 N Panel weight: Max. 8.5 kg Screw fixing Max. internal cabinet width: 1170 mm Spring force Weight 2 x 320 N 7.0 kg SOFTLIFT SOFTLIFT SWING UP FITTINGS Material: Steel : Powder coated, silver Includes front SOFTLIFT hinge, gas struts, mounting plates, cover plates and installation instructions Max. 570 mm cabinet width Height mm Weight kg Max. 870 mm cabinet width Height mm Weight kg Max mm cabinet width Height mm Weight kg Max mm cabinet width Height mm Weight kg ADAPTOR BRACKETS For aluminium framed flaps, 23 and 38 mm Material: Steel : Powder coated, silver Front: 19 mm Includes fixing materials HHC.08

37 flap fittings & hinges STABILUS The STABILUS furniture gas springs can be used for kitchen overhead cabinets, office furniture, blanket chests, toy chests, bench cushions, flaps and lids. In combination with two conventional cup hinges, the gas springs provide innovative benefits. Benefits include: Automatic force-supported opening at a defined opening speed Secure holding in place High quality feel Easy and soft closing Ideal for modular solutions Easy mounting Compact design takes up minimal space Self-explanatory function Attractive design STABILUS FURNITURE GAS SPRINGS Material: Steel : Silver metallic Includes 1 gas spring lid stay Newton force 50 N N N N N N N N N Flap height in mm Flapwidthinmm Quantity Force 50N 50N 100N 140N Quantity Force 50N 60N 100N 140N Quantity Force 50N 60N 100N 160N Quantity Force 50N 100N 140N 180N Quantity Force 60N 100N 160N 200N The desired gas springs - with pre-mounted end fittings - can be selected on the basis of these values.the values indicated are guideline values only. We recommend a functional check in the application itself; this is the only way to take into consideration such influencing factors as exact centre of gravity position, system friction, handles etc. The use of different panel materials or different hinges may yield differing results. REFRIGERATOR DOOR HINGE REFRIGERATOR DOOR HINGE For attaching an appliance to a hinged front panel Allows you to open the appliance door while the cabinet door is being opened Material: Plastic Colour: Brown Supplied with 4 fastening screws HHC

38 worktop storage cabinet ALUMINIUM ROLLER SHUTTER DOOR AND HOUSING For installation into pre-made cabinet Complete with guide rails and box mechanism : Aluminium anodised COMPLETE SET Cabinet width x height mm 600 x x GLASS ROLLER SHUTTER DOOR AND MECHANISM For installation into pre-made cabinet Complete with guide rails and counter balancing mechanism : Glass Roller door and aluminium anodised guide rails Cabinet width x height mm 500 x x x x NOTE: When ordering, quote external cabinet height with catalogue number. Please enquire about manufacturing time HHC.08

39 pegaso door opening mechanism The Pegaso door opening mechanism is suitable for many types of door applications, where a hinged door may intrude into an open space or high traffic areas. DOOR OPENING MECHANISM : Steel, aluminium coloured Cabinet width Travel 300 mm 450 mm mm 600 mm CONNECTING BAR : Steel, aluminium coloured Length: 250 mm PEGASO CENTRE HINGE : Steel, aluminium coloured For greater stability on tall doors HHC

40 Drawer Systems and Accessories STUDIO drawers spice racks cutlery trays anti-slip mats internal drawers drawer inserts drawer fascias accessories 40 HHC.08

41 STUDIO drawer system information STUDIO TIPMATIC ESETE Making something good even better is a challenge. Häfele presents a double walled drawer system that offers better solutions. Even Better Sliding Even Better Cushioning Even Better Stability Even Better Synchronisation With the help of Tipmatic, clean lines set the trend. Convenient Opening Optimal Access Reliable Closing A wide range of Applications Individualise your STUDIO drawer systems with accessories. Spice Racks Crockery Dividers Cutlery Inserts Anti-slip Mats Side Elements Side Style Options SIDEWOOD STUDIO STEEL Options SILVER WHITE STAINLESS WOOD All drawer systems come fully assembled and packed in a carton for convenience! Drawer sides may be used with either the STUDIO Soft Close Full Extension or Tipmatic push to open self opening system For additional information on the complete STUDIO drawer range or to request your copy of the STUDIO Drawer Program catalogue, please call HAFELE, or simply visit HHC

42 sensotronic drawer system The Grass Sensotronic drawer system from Häfele is intelligent movement design for exclusive comfort. It is the world s first intelligent drawer that is electronically controlled over it s entire length. With European innovation and technology, drawer pull-outs and interior pull-outs can open and close in response to a gentle tap. The drawers move loads of up to 70 kg and uniformly open and shut at a set speed. Intelligent electronic drawers GRASS Sensotronic Program For additional information, please call HAFELE, or simply visit HHC.08

43 grass sensotronic The beauty of ergonomics Ergonomics is the trend, just like simple handle-free furniture fronts. Grass Sensotronic supports both of these trends. Drawers, pull-outs and interior pull-outs open and close in response to a gentle tap, they move different loads of up to 70 kg, uniformly open and shut at the set speed. And the drawers think with you: they sense resistance and stop, avoid collisions amongst themselves and protect against injuries. Intelligence moves, and yet it s so simple in installation and operation alike. Sensotronic performance features The drawer can be opened by tapping or pulling; a gentle nudge is sufficient The drawer is closed by tapping Tapping determines the direction of travel, the drawer automatically performs the movement - no effort is required (in contrast, electromechanical soloutions do not have power assisted closure) Can be used with or without handle (the drawer reacts in accordance with the application) Blockage recognition over the entire distance - in both directions Anti-collision protection (no collision of drawers e.g. in the case of diagonal corners); drawers can communicate with one another Drawer follows a speed profile: Uniform opening and closing speed irrespective of drawer weight Transport-assisted solution (heavy loads are moved by a drive over the entire distance in both directions) Soft stop at end position: When opened, the drawer moves softly into its end position Cushioned closure: Drawer closes softly Optimal side stability Interior pull-out logic: Interior pull-out stops before reaching the extended pull-out and can be closed again by tapping the pull-out Position initialisation: Depth adjustment for perfectly aligned fronts Drawers and pull-outs with Grass Sensotronic open and close electronically. Silent, harmonious, and above all: intelligent. The intelligence of Grass Sensotronic leads to unique convenient functions such as end-position dampening, interior drawer logics, or the load-independent travel profile. The jam protection feature also makes Grass Sensotronic exceptional, and your furniture more valuable. Grass Sensotronic prevents possible collisions and damage to the decor. For additional information, please call HAFELE, or simply visit HHC

44 cuisio drawer accessories The variable sizes of the cutlery trays demonstrate their ability to suit anyones drawer storage needs. This product is a great way to make the best use of your kitchen drawers CUTLERY TRAY 1 Cabinet width: 300 mm Green translucent White translucent CUTLERY TRAY 2 Cabinet width: 400 mm Green translucent White translucent CUTLERY TRAY 3 Cabinet width: 450 mm Green translucent White translucent CUTLERY TRAY 4 Cabinet width: 500 mm Green translucent White translucent CUTLERY TRAY 5 Cabinet width: 600 mm Green translucent White translucent CUTLERY TRAY 6 Cabinet width: 700 mm Green translucent White translucent CUTLERY TRAY 7 Cabinet width: 800 mm Green translucent White translucent CUTLERY TRAY 8 Cabinet width: 900 mm Green translucent White translucent CUTLERY TRAY 9 Cabinet width: 1000 mm Green translucent White translucent CUTLERY TRAY 10 Cabinet width: 1200 mm Green translucent White translucent END PIECE For decorative finish to cutlery tray Green translucent White translucent KNIFE BLOCK For 3 knives, suits narrow compartments For 4 knives, suits wide compartments HHC.08

45 drawer accessories The high quality combination of timber and plastic makes these drawer inserts very elegant. Knife blocks, variable dividers and spice jar inserts (with either 6 or 12 compartments) allow the kitchen user to design the inside of each drawer to suit their needs. CUTLERY INSERT : High gloss silver grey plastic For cabinet width 450 mm mm mm mm mm mm SPICE JAR INSERT 6 compartments Suitable for cabinet width 500 mm+ : Lacquered beech plywood SPICE JAR INSERT 12 compartment Suitable for cabinet width 500 mm+ : Lacquered beech plywood KNIFE BLOCK Suitable for cabinet width 500 mm+ : Lacquered beech plywood DIVIDER Suitable for cabinet width 500 mm+ : Lacquered beech plywood SPICE JAR : Glass, lead crystal clear HHC

46 sorto stainless steel inserts 66 Cab. width 450 mm Cab. width 600 mm Cab. width 600 mm MAGIC SORTO INSERT Height: 66 mm Depth: 475 mm : Stainless steel For cabinet width 450 mm mm mm MAGIC SORTO DIVIDER Height: 66 mm Depth: 475 mm : Stainless steel HHC.08

47 cuisio flex drawer inserts Drawer inserts for organising plates, dishes, pots and pans and a host of other kitchen items. CUISIO DRAWER DIVIDER Height: 120 mm Size: 236 wide to 386 wide adjustable in 25 mm increments Colour Set Pack Green translucent 2 frames White translucent 2 frames Green translucent 3 frames White translucent 3 frames HHC

48 stainless steel & black cutlery trays Introducing the Esete range of drawer accessories, which provide an exclusive look that is specifically designed to fit the Studio drawer programme. Ask your kitchen designer or fabricator about the Studio Drawer Program. Note: These products are designed to fit 500 mm deep Studio drawers CUTLERY TRAY Material: Stainless steel For cabinet width 450 mm CUTLERY TRAY Material: Stainless steel For cabinet width 600 mm CUTLERY TRAY WITH KNIFE BLOCK Material: Stainless steel For cabinet width 600 mm CUTLERY TRAY Material: Stainless steel For cabinet width 900 mm CUTLERY TRAY Material: Stainless steel For cabinet width 1200 mm Don t forget additional accessories on page 50! 48 HHC.08

49 walnut & stainless steel cutlery trays Introducing the Esete range of drawer accessories, which provide an exclusive look that is specifically designed to fit the Studio drawer programme. Ask your kitchen designer or fabricator about the Studio Drawer Program. Note: These products are designed to fit 500 mm deep Studio drawers CUTLERY TRAY Material: Walnut and stainless steel Cabinet width 450 mm CUTLERY TRAY Material: Walnut and stainless steel Cabinet width 900 mm CUTLERY TRAY Material: Walnut and stainless steel Cabinet width 600 mm CUTLERY TRAY Material: Walnut and stainless steel Cabinet width 1200 mm Don t forget additional accessories on page 50! HHC

50 walnut & stainless steel drawer units Introducing the Esete range of drawer accessories, which provide an exclusive look that is specifically designed to fit the Studio drawer programme. Ask your kitchen designer or fabricator for Studio... Note: These products are designed to fit 500 mm deep Studio drawers KNIFE BLOCK Material: Acrylic SPICE SET Material: Glass and stainless steel Includes spice jars with lid SPICE SET Material: Glass and stainless steel Includes 2 jars with lid and 3 jars with shaker PLASTIC CHOPPING BOARD WALNUT CHOPPING BOARD HHC.08

51 walnut & stainless steel base plates Introducing the Esete range of drawer accessories, which provide an exclusive look that is specifically designed to fit the Studio drawer programme. Ask your kitchen designer or fabricator for Studio... Note: These products are designed to fit 500 mm deep Studio drawers EXAMPLE Drawer inserts with Bottle Rack and Cross Dividers, order separately. Item 1 & 2 1 DRAWER INSERT WITH BOTTLE RACK Material: Walnut and stainless steel Size: W x D x H: 260 x 460 x 140 mm DRAWER UNIT WITH CROSS DIVIDERS Material: Walnut and stainless steel Size: W x D x H: 260 x 460 x 140 mm EXAMPLE Drawer inserts with Spice Containers and Cross Dividers, order separately. Item 3 & 4 3 OPEN DRAWER UNIT Material: Walnut and stainless steel Size: W x D x H: 260 x 460 x 140 mm DRAWER UNIT WITH SPICE CONTAINERS Material: Walnut and stainless steel Size: W x D x H: 260 x 460 x 198 mm HHC

52 walnut & stainless steel base plates Introducing the Esete range of drawer accessories, which provide an exclusive look that is specifically designed to fit the Studio drawer programme. Ask your kitchen designer or fabricator for Studio... Note: These products are designed to fit 500 mm deep Studio drawers BASE PLATE WITHOUT POSTS Material: Walnut Cabinet width 600 mm mm mm BASE PLATE WITHOUT POSTS Material: Stainless steel Cabinet width 600 mm mm mm POST Material: Stainless steel Height 210 mm POST Material: Stainless steel Height 145 mm POST Material: Acrylic Height 160 mm HHC.08

53 drawer accessories The cutlery trays come with a wide rim and can be cut down to the exact internal drawer dimensions, making these inserts ideal for most drawer sizes in all kitchens. TEXTURED CUTLERY INSERT Material thickness: 3 mm Height: 57 mm : Textured white plastic For cabinet width 300 mm mm mm mm mm mm mm UNIVERSAL CUTLERY TRAY Material thickness: 2 mm Height: 54 mm : Gloss white plastic To suit cabinet width mm SPICE DRAWER INSERTS Material thickness: 2.5 mm Height: 50 mm : Textured silver plastic For cabinet width 400 mm mm mm mm mm mm UNIVERSAL CUTLERY INSERT Height: 57 mm Material thickness: 2 mm : Textured white plastic For cabinet width mm mm SPICE DRAWER INSERT A minimum inside drawer height of 83 mm is required Size: 1300 x 550 mm Material thickness: 3 mm : Glossy white plastic ANTI-SLIP DRAWER MAT Roll size: 1550 mm long x 500 mm wide Colour White Silver HHC

54 riverso drawer system The drawer system can be opened from either side and has a front panel, which when opened, keeps the opposite side closed. The smooth action and great stability of the full extension are hallmarks of the Riverso. The system comes with a built in Soft Stopp dampener so there will never be any slamming of the drawers. RIVERSO RIVERSO DRAWER FITTING For double sided drawers Full extension Integrated Soft Stopp dampening system Load capacity: 25 kg Colour: Silver Depth mm mm mm mm mm HHC.08

55 glass holders Keep glasses dust-free and neatly hung on display, or hidden in a cupboard for easy storage with glass holders. GLASS HOLDER, STANDARD Holds 12 glasses, 3 rows x 4 glasses each Material: Steel : Plated or powder coated Chrome polished Chrome matt Brass polished Black gloss Allow minimum 75 mm spacing between installed glass holders for hanging glasses. GLASS HOLDER, JUMBO Holds 18 glasses, 3 rows x 6 glasses each Material: Steel : Plated or powder coated Chrome polished Chrome matt Allow minimum 75 mm spacing between installed glass holders for hanging glasses. GLASS HOLDER Suitable for bar areas For screw fixing beneath shelf Material: Brass : Polished Brass Width x Depth 100 x 300 mm : Chrome-plated polished Width x Depth 100 x 300 mm Don t forget wine bottle holders to finish off your bar area, on page 29 HHC

56 ynotloc cupboard & drawer locking system Automatically lock all the cupboards and drawers in the hazardous areas of your home with YNOTLOC. Open them all at once with the flick of the master switch or choose individual locks for one-off access using the magnetic wand. It s possible with child-safe YNOTLOC. YNOTLOC 2 LOCK STARTER PACK Pack includes: 2 complete locks, 1 wand with magnet, 1 plug pack, 1 jumper wire, 2 magnetic sensors with wires, 2 installation tools and fixing materials LOCK PACK Pack includes: 4 complete locks, 4 jumper wires, 4 magnetic sensors with wires, 4 installation tools and fixing materials MASTER SWITCH PACK Pack includes: Push button unit with printed circuit board, 1 jumper wire 4 metres long, 1 battery and fixing materials HHC.08

57 glass splashbacks Techno Introduce a splash of colour to enhance any space. Whether kitchen, laundry or bathroom our pre-prepared and ready to install splashbacks offer a durable and stylish surface. Black Available in a range of designer colours and sizes; pre-cut splashbacks offer immediate installation without the need for lengthy templating. Black Height x Width 750 x 600 mm x 900 mm x 1000 mm x 1200 mm Napa Height x Width 750 x 600 mm x 900 mm x 1000 mm x 1200 mm Tranquil Height x Width 750 x 600 mm x 900 mm x 1000 mm x 1200 mm Dynamite Height x Width 750 x 600 mm x 900 mm x 1000 mm x 1200 mm Vapour Height x Width 750 x 600 mm x 900 mm x 1000 mm x 1200 mm Wasabi Height x Width 750 x 600 mm x 900 mm x 1000 mm x 1200 mm Tranquil Techno Height x Width 750 x 600 mm x 900 mm x 1000 mm x 1200 mm Wasabi Can be used for various applications Stylish and Affordable Hygienic Easy to clean A variety of fashionable colours Toughened Safety Glass in clear float Full instructional information supplied Vapour Dynamite Napa HHC

58 Sinks, Taps and Accessories blanco sinks designer tapware accessories 58 HHC.08

59 zeroxline undermount sinks & accessories BLANCO Blanco undermount sinks are ideal for use in combination with granite, reconstituted stone or fabricated benchtops. BLANCOZEROX 700U Includes designer pop-up waste and overflow (14 mm Ø drill hole required) : Stainless steel Dimensions: 700 x 400 mm Bowl depth: 175 mm BLANCOZEROX 500U Includes designer pop-up waste and overflow (14 mm Ø drill hole required) : Stainless steel Dimensions: 500 x 400 mm Bowl depth: 175 mm BLANCOZEROX 450U Includes designer pop-up waste and overflow (14 mm Ø drill hole required) : Stainless steel Dimensions: 450 x 400 mm Bowl depth: 175 mm BLANCOZEROX 400U Includes designer pop-up waste and overflow (14 mm Ø drill hole required) : Stainless steel Dimensions: 400 x 400 mm Bowl depth: 175 mm BLANCOZEROX 180U Includes designer waste : Stainless steel Dimensions: 180 x 400 mm Bowl depth: 175 mm BLANCOAXIS 180U Includes 1½" designer waste (non close for draining) : Stainless steel Dimensions: 550 x 400 x 18 mm Bowl depth: 18 mm HHC

60 zeroxline undermount sinks & accessories BLANCOZEROX U Includes designer pop-up waste (14 mm Ø drill hole required) : Stainless steel Dimensions: 545 x 400 mm Bowl depth: 175 mm Bowl left orientation Bowl right orientation BLANCOZEROX U Includes designer pop-up waste (14 mm Ø drill hole required) : Stainless steel Dimensions: 825 x 410 mm Bowl depth: 175 mm BLANCOZEROX T-U Includes designer pop-up waste (14 mm Ø drill hole required) : Stainless steel Dimensions: 975 x 400 mm Bowl depth: 175 / 18 mm Bowl left orientation Bowl right orientation COLANDER Fits all ZEROXLINE main and additional bowls : Stainless steel Dimensions: 200 x 440 x 100 mm DRAINER Fits all ZEROXLINE main and additional bowls : Stainless steel Dimensions: 240 x 440 x 32 mm GLASS CUTTING BOARD Free standing Heat resistant safety glass Dimensions: 340 x 466 mm GLASS CUTTING BOARD Two-tiered: Fits on top of zeroxline colander (slides over cut-out) Heat resistant safety glass Dimensions: 240 x 440 mm GLASS CUTTING BOARD Two-tiered: Fits on top of zeroxline colander (slides over cut-out) Heat resistant safety glass Dimensions: 200 x 440 mm Two tiered: fits onto colander ( ) HHC.08

61 designer undermount sinks & accessories BLANCORONDO Includes designer waste : Stainless steel Dimensions: 385 mm Ø Bowl depth: 165 mm BLANCOYPSILION 550U Includes designer wastes : Stainless steel Dimensions: 550 x 420 mm Bowl depth: 175 and 130 mm BLANCOSUPRA 500U Includes designer waste : Stainless steel Dimensions: 500 x 400 mm Bowl depth: 175 mm BLANCOSUPRA 550T Includes 1½ designer waste (non close for draining) : Stainless steel Dimensions: 550 x 400 mm Bowl depth: 18 mm * Suits BLANCOSUPRA 500U BLANCO JOTA 180U Includes designer waste and colander : Stainless steel Dimensions: 180 x 290 mm Bowl depth: 130 mm BLANCOAXIS 180U Includes designer waste and colander : Stainless steel Dimensions: 180 x 340 mm Bowl depth: 180 mm HHC

62 premium surface-mount sinks & accessories BLANCOPLUS 45 S Includes designer waste : Stainless steel brushed Dimensions: cabinet 450 mm Bowl depth: 160 mm Bowl reversible BLANCOPLUS 6 S Includes designer wastes : Stainless steel brushed Dimensions: cabinet 600 mm Bowl depth: 160 and 130 mm Bowl reversible BLANCOPLUS 8 S Includes designer wastes : Stainless steel brushed Dimensions: cabinet 800 mm Bowl depth: 160 mm Bowl reversible BLANCOCLASSIMA 6 S Includes designer wastes Main bowl with pop-up waste : Stainless steel Dimensions: cabinet 600 mm Bowl depth: 160 and 130 mm Bowl reversible BLANCOCLASSIC 8 Includes designer wastes : Stainless steel Dimensions: cabinet 800 mm Bowl depth: 175 mm CHOPPING BOARD Includes 100 ml bottle of anti-bacterial oil : Beech * Suits sinks & CHOPPING BOARD Includes 100 ml bottle of anti-bacterial oil : Beech * Suits sink HHC.08

63 kitchen tapware Blanco designer tapware follows the tradition of functionality and attractiveness. Minimalism is the key with the eye catching BLANCOZIROS high arc, making it possible to easily fill large pots and vases.the BLANCORADOS extendible spray guarantees more convenience when filling pots and vases outside the bowl or even when cleaning the sink centre. Please note: all taps for use with high-pressure water cylinders only BLANCOPROFI SPRAY HEAD : Polished chrome BLANCOPODOS : Polished chrome BLANCOELIPSO : Polished chrome BLANCOELIPSO PULL OUT SPRAY HEAD : Polished chrome BLANCORADOS : Polished chrome BLANCORADOS S PULL OUT SPRAY HEAD 185 mm spout : Polished chrome BLANCOMASTER CONTROL : Polished chrome BLANCOMASTER S DUO SPRAY HEAD : Polished chrome BLANCOZIROS : Polished chrome BLANCONAVA : Polished chrome HHC

64 linero railing systems LINERO PROFILE STRIP : Nickel-plated matt steel Size Cat No. 600 mm mm mm mm SPICE RACK : Nickel-plated matt steel KITCHEN ROLL HOLDER 3 level tear off unit for aluminium foil, cling wrap and paper towel rolls Size (W x D x H): 352 x 150 x 305 mm SHELF Supporting elements: Nickel-plated matt steel Shelf element: Stainless steel Size (W x D x H): 440 x 150 x 275 mm WRITING SET HOLDER Includes note pad and biro Supporting elements: Nickel-plated matt steel Plate: Stainless steel HHC.08

65 linero railing systems COOK BOOK SHELF Supporting elements: Nickel-plated matt steel Size (W x D x H): 440 x 47 x 320 mm Shelf element: Stainless steel PLATE HOLDER : Nickel-plated matt steel UTENSIL HOLDER Includes 1 Stainless steel container Size (W x D x H): 147 x 150 x 335 mm Supporting elements: Nickel-plated matt steel HOOK RAIL Contains 6 hooks Size: 380 mm : Nickel-plated matt steel KNIFE BLOCK Solid beech wood block for 8 knives Size (W x D x H): 380 x 80 x 370 mm Supporting elements: Nickel-plated matt steel with perspex cover KNIFE PLATE Stainless steel knife plate Size (W x D x H): 380 x 80 x 370 mm Supporting elements: Nickel-plated matt steel TOWEL RAIL : Nickel-plated matt steel Size: 570 mm PAPER TOWEL HOLDER Paper towel holder Size (W x D x H): 352 x 150 x 255 mm HHC

66 quadra gas cooktop & kitchen scales Our kitchen scale options fulfill high quality and precision standards expected from any kitchen user. GAS COOK TOP Includes four burner and enamelled cast iron grids. Burner rings and electronic under-knob ignition : Stainless steel Cut-out size (W x D x H) 1162 x 351 x 70 mm GAS COOKER TOP Includes four burner and enamelled cast iron grids. Burner rings and electronic under-knob ignition : Stainless steel Cut-out size (W x D x H) 908 x 351 x 70 mm KITCHEN SCALES To set on sides of kitchen drawers, removable Includes hold function, weight, on/off switch on back Size (W x D x H): 235/475 x 232 x 40 mm Power: 4 x AA batteries included Material: Aluminium and plastic : Silver colour and anthracite mm mm HHC.08

67 powered tool bar The vertical powerdock is recessed, so it can sit flush with the desktop when not in use, and brought up when needed. POWERDOCK VERTICAL 10 AMP Concealed power with pre-fitted 2 metre lead, 10 amp and 3 pin plug : Silver 2 x GPO : Champagne 2 x GPO HHC

68 cable management fittings 210 Length 75 WIRE DOUBLE TIER CABLE CHANNEL Material: Steel wire, powder-coated black Length Cat No. 650 mm mm mm mm Self-taping thread Ø CABLE HOOK Provides simple yet functional cable management. Self-tapping wood thread for Ø5 mm holes Material: Re-inforced nylon, black HHC.08

69 Waste Management bins for fixed fronts bins for hinged doors built-in waste bins step stools HHC

70 one2five waste bin system The One2Five Waste Bins can be combined with and fitted into the STUDIO drawer systems shown on page 41 to create the configurations shown here. Now enjoy the beautiful STUDIO drawer soft-close action throughout your kitchen 300 width 500 depth 400 width 500 depth 450 width 500 depth 500 width 500 depth 600 width 500 depth 8 litres 8 litres 2 x 8 litres or 1 x 17/26/32 litres 2 x 8 litres or 1 x 17/26/32 litres 8 litres 8 litres 8 litres 17/26/32 litres 2 x 8 litres or 1 x 17/26/32 litres 2 x 8 litres or 1 x 17/26/32 litres 17/26/32 litres 17/26/32 litres Min * Cabinet width FLEXIBLE HANGING FRAMES For hanging waste bin pails in STUDIO drawers Cabinet thickness: 16 or 18 mm upon request Cabinet. width 300 mm mm mm mm mm Three dimensionally adjustable front support angle Same height drawer, hanging frame and bins Waste bags strongly fixed by carrying handles Additional drawer front fixing and adjustable bracket 70 HHC.08

71 one2five waste bin system Width Depth Height The One2Five Waste Bins can be combined with and fitted into the STUDIO drawer systems shown on page 41 to create the configurations shown here. Now enjoy the beautiful STUDIO drawer soft-close action throughout your kitchen WASTE BIN PAILS : Plastic, grey Capacity: 8, 17, 26 and 32 litre For use with bin frames. Bending handles to hold wastebags Capacity 8 litre litre litre litre LID COVER PLATES : Plastic, grey For use with one2five waste bin system Cabinet. width 300 mm mm mm mm mm INDIVIDUAL BIN LID : Plastic, grey For use with bin containers Capacity: 8 litre Capacity: 7, 26, 32 litre LID COVER PLATE SUSPENSION RAILS : Plastic, grey For use with lid cover plates HHC

72 waste bins for fixed fronts By using a system that caters for rubbish, recycling and Bio waste, you are helping keep your kitchen clean and waste out of sight! SINGLE WASTE BIN Includes 1 x 20 litre bin Base mounted for cabinet width 300 mm Size (W x D x H): 242 x 400 x 420 mm DOUBLE WASTE BIN Includes 2 x 15 litre bins Base mounted for cabinet width 300 mm Size (W x D x H): 244 x 477 x 433 mm DOUBLE WASTE BIN Includes 2 x 15 litre bins Top or base mounted for cabinet width 350 mm internal : White Size (W x D x H): 350 x 525 x 355 mm DOOR OPENER For fixed front waste bins : Aluminium matt pedal with black counterplate For hinged front waste bins Additional opening tension for if required HHC.08

73 waste bins for fixed fronts EURO CARGO 45 SOFT CONTROL CLOSE Includes 2 x 35 litre waste bins Suitable for cabinet size 450 mm Size (W x D x H): 418 x 528 x 546 mm EURO CARGO 30 SOFT CONTROL CLOSE Includes 1 x 30 litre waste bin Suitable for cabinet size 300 mm Size (W x D x H): 268 x 403 x 427 mm EURO CARGO 60 SOFT CONTROL CLOSE Includes 2 x 35 litre and 2 x 8.5 litre bins Suitable for cabinet size: 600 mm Size (W x D x H): 568 x 528 x 546 mm CARGO 45 Includes 1 x 12 litre, 2 x 8.5 litre and cleaner baskets Suitable for cabinet size: 450 mm Size (W x D x H): 418 x 430 x 320 mm CARGO 60 Includes 1 x 18 litre, 2 x 8.5 litre and cleaner baskets Suitable for cabinet size: 600 mm Size (W x D x H): 568 x 430 x 420 mm HHC

74 waste bins for behind hinged doors Keeping rubbish out of sight and out of mind! SINGLE WASTE BIN Includes 1 x 19 litre bin For cabinet size 450 mm Size (W x D x H): 410 x 210 x 470 mm : White SLIDE-OUT WASTE BIN Includes 1 x 20 litre bin For cabinet size: 300 mm Size (W x D x H): 242 x 420 x 380 mm : White FOLLOWER To use with slide-out waste bin ( ) Minimum cabinet width: 400 mm Allows bin to slide out on opening of door UNDERSINK WASTE BIN Includes 1 x 12 litre and 1 x 18 litre bin Suitable for cabinet size: 500 mm Size (W x D x H): 425 x 320 x 341 mm DOUBLE WASTE BIN Includes 2 x 15 litre bins Suitable for cabinet size: 300 mm Size (W x D x H): 248 x 479 x 407 mm TRIPLE WASTE BIN 1 x 15 litre and 2 x 7 litre bins Suitable for cabinet size: 300 mm Size (W x D x H): 248 x 479 x 407 mm HHC.08

75 waste bins for behind hinged doors SINGLE WASTE BIN Includes 1 x 40 litre bin For cabinet size: 400 mm Size (W x D x H): 319 x 465 x 542 mm DOUBLE WASTE BIN Includes 2 x 18 litre bins For cabinet size: 400 mm Size (W x D x H): 346 x 471 x 320 mm TRIPLE WASTE BIN Includes 1 x 18 litre and 2 x 8.5 litre bins For cabinet size: 400 mm Size (W x H x D): 346 x 471 x 320 mm DOUBLE WASTE BIN Includes 2 x 15 litre bins For cabinet size: 300 mm Size (W x D x H): 248 x 479 x 407 mm DOUBLE WASTE BIN Includes 2 x 15 litre bins For cabinet size: 350 mm internal Size (W x D x H): 350 x 525 x 340 mm HHC

76 waste bins & accessories 20 LITRE WASTE BIN 1 x 20 litre bin For cabinet size: 400 mm Size (W x D x H): 365 x 305 x 680 mm White Stainless steel LITRE WASTE BIN 1 x 15 litre bin Suitable for 400 mm cabinet Size (W x D x H): 355 x 305 x 385 mm : White powder coated steel or stainless steel housing, light grey plastic pail and white plastic lid Bin finish White Stainless steel LITRE WASTE BIN 1 x 11 litre bin For cabinet size : 400 mm Size (W x D x H): 345 x 255 x 545 mm : White plastic with white steel bracket WASTE BIN 1 x 10 litre bin For cabinet size: 400 mm Size (W x D x H): 365 x 305 x 420 mm White Stainless steel LITRE WASTE BIN 1 x 5 litre bin For cabinet size: 300 mm Size (W x D x H): 175 x 175 x 310 mm : White plastic WORKTOP WASTE BIN For recess and surface mounting Includes 1 x 11 litre bin, Size: Ø310 x 300 mm : Black plastic bin, stainless steel lid DUSTPAN AND BRUSH HOLDER Left or right hand installation : Chrome-plated HHC.08

77 step stools & ladders STEP STOOL : White powder coated steel and grey plastic caps on all contact points FOLDING STEPS With 200 x 300 mm steps and non-slip rubber tread : White powder coated steel and grey plastic caps on all contact points Colour White Accessories FOLDING BRACKET For attaching to folding steps ( as above only) For mounting to a removable kickboard : Bright galvanised steel HANGING BRACKET For screw mounting inside a cabinet. For storage of folding steps ( as above only) Size (W x D x H): 140 x 30 x 30 mm : White powder coated steel HHC

78 Laundry Accessories laundry baskets and fittings wall mounted ironing board built-in ironing board hanging laundry accessories 78 HHC.08

79 laundry baskets & fittings A range of storage baskets is available for all your storage needs. LAUNDRY BASKET With lowered handles for hooking onto mounting rail : Chrome-plated steel For cabinet width 350 mm Capacity: 29 litre Width: 285 mm Depth: 260 mm Height: rear 365 mm, front 420 mm For cabinet width 450 mm Capacity: 39 litre Width: 385 mm Depth: 260 mm Height: rear 365 mm, front 420 mm FLAP-EX FLAP FITTING For controlling opening of the door front Consisting of 1 angled foot, round rod with plastic sleeve, 2 nickel-plated chrome spiral springs and 1 white plastic screw mounted support MOUNTING RAIL For fixing laundry basket with screw mounting to door front Width: 214 mm Hole distance: 160 mm : Chrome-plated steel HHC

80 synergy collection - accessories PULL-OUT HAMPER PULL-OUT LAUNDRY HAMPER With full extension slide and removable bags Built-in handles make it easy to remove the bags Depth: 355 mm Height: 530 mm from top of the frame to bottom of the bag (when bags are loaded, the height will be greater than specified) Width: 457 mm, 1 bag Aluminium, satin Width: 610 mm, 2 bags Aluminium, satin Width: 762 mm, 2 bags Aluminium, satin TILT-OUT HAMPER TILT-OUT LAUNDRY HAMPER With removable bags Frame screw mounts to the back of the tilt-out door Depth: 345 mm Height: 600 mm from top of the frame to the bottom of the bag (when bags are loaded, the height will be greater than specified) Material: Powder coated steel frame, nylon bag Width: 412 mm, 1 bag Black Width: 565 mm, 2 bags Black Width: 714 mm, 2 bags Black HHC.08

81 ironfix - ironing boards The IRONFIX wall mounted ironing boards are pre-assembled and easy to mount. Equipped with an easy turning mechanism and lock. The ironing board can be effortlessly turned 90º to the left, right or inclined and secured. IRONFIX built-in ironing boards are an excellent space saving solution in your kitchen or laundry. The entire ironing board is built into the drawer and can be accessed by simply pulling the drawer open and unfolding the board. With spare parts available, you can ensure this ironing board will last you a lifetime. Wall Mounted WALL MOUNTED IRONING BOARD Complete set includes assembly material : White powder coated steel with striped fabric ironing board cover Dimensions (W x H): 365 x 595 mm Board length: 950 mm when opened With plastic cover Drawer Mounted DRAWER MOUNTED IRONING BOARD Complete set includes 2 carcase rails, 1 collapsible ironing board support system with pre-assembled 2-part extending runners and folding ironing board Features: Variable width adjustment for built-in widths between 362 and 500 mm, automatic extending support when drawer is opened Board length: 950 mm when opened : White powder coated steel and striped fabric ironing board cover Cat. No Lateral LATERAL IRONING BOARD Complete set includes ironing board, assembly material and installation instructions : White powder coated steel with grey striped fabric ironing board cover Dimensions (W x D x H): 520 x 350 x 125 mm Board length: 950 mm when opened Accessories IRONING BOARD COVER For IRONFIX ironing boards Material: Natural white cotton with grey stripes Foam backing With rubber clamping and elastic tensioning cord SLEEVE IRONING BOARD ARM Smaller ironing board for ironing shirt sleeves and smaller garments. For hanging onto the mounting bracket on IRONFIX ironing boards Material: Natural white cotton with grey stripes Foam backing SHIRT SLEEVE IRONING BOARD COVER For IRONFIX sleeve ironing board arm Material: Natural white cotton with grey stripes Foam backing With rubber clamping and elastic tensioning cord HHC

82 Living and Bedroom Fittings shelving systems pull-out storage system wardrobe hooks and hangers wardrobe accessories built-in bed storage accessories 82 HHC.08

83 wardrobe shelving system The LOGO wardrobe shelving system has the ability to suit anyones needs. It also functions as a moveable storage area or room divider. Variable uses are available with different brackets and adaptors, and simple mounting and installation make the system ideal. Many different looks are also possible by interchanging profile types and with the use of different materials, such as aluminium, timber or glass. 1 PROFILE COLUMN Length: 3000 mm Height adjustable, cut to size : Silver coloured aluminium CORNER CONNECTOR To connect the profile Includes fixing materials : Silver coloured aluminium CEILING OR WALL FASTENER : Silver coloured zinc diecast ADJUSTABLE FOOT Includes fixing material Adjustable up to 30 mm : Silver coloured zinc diecast PLATE FOR ADJUSTABLE FOOT Includes fixing material and rubber adhesive : Silver coloured zinc diecast SHELF BRACKET Includes fixing materials For aluminium, aluminium-glass, and aluminium-timber shelves : Silver coloured zinc diecast Shelf depth 180 mm mm mm BRACKET For timber shelves and carcases or glass shelves Includes fixing materials : Silver coloured zinc diecast SHELF SUPPORT For fixing to profile Use with above bracket 7 as a clamp : Silver coloured zinc diecast CARCASE BRACKET For fixing to profile Use with shelf bracket 7 as a clamp : Silver coloured zinc diecast HHC

84 wardrobe shelving system 10 ADAPTOR To use with 14 and 15, tie, belt, trouser and skirt holders Fixes into profile : Silver coloured aluminium END PROFILE WITH LIP With groove for shoe racks Length: 928 mm : Silver coloured aluminium With lip Without lip ADAPTOR For wardrobe lift on page 91 : Silver coloured aluminium WARDROBE HANGING RAIL BRACKET For fixing into profile and connection of wardrobe rail on page 89 : Silver coloured zinc diecast A B 12 END PROFILES Length: 928 mm : Silver coloured aluminium With groove and no clip A For glass and timber inserts B MID-PROFILE With groove and clip for connection to 11 and 12 A and 12 B Length: 928 mm : Silver coloured aluminium 300 mm For Skirt, Trouser and Tie holders, see pages 86 to HHC.08

85 pull-out storage system PULL-OUT WARDROBE FRAME Adjustable with full extension ball bearing runners Side fixing, for shelf mounting order 2 For use with 3 4 and 6 : Silver aluminium Installed width 410/550 mm /690 mm /830 mm /1000 mm /1100 mm UNDER SHELF MOUNTING PLATE For mounting pull out wardrobe frame 1 under a shelf : Silver powder coated steel WIRE BASKET For hanging onto frame 1 Depth: 500 mm : Silver powder coated steel Width 380 mm mm mm mm Order basket linen separately 4 WIRE SHELF For hanging onto frame 1 Depth: 500 mm : Silver powder coated steel Width 410 mm mm mm BASKET LINER - QUILTED MAT For use with wire baskets 3 and wire shelves 4 Colour: Beige Width 300 mm mm mm mm SHOE RACK For hanging onto frame 1 Depth: 500 mm : Silver powder coated steel Width 390 mm mm BEECH TROUSER RACKS For hanging onto frame Depth: 525 mm : Lacquered beech timber Width 480 mm mm PULL OUT WARDROBE RAIL Single extension ball bearing runners Depth: 500 mm Width: 85 mm Height: 175 mm : Silver aluminium HHC

86 pull-out storage system LAUNDRY BAG WITH FRAME For hanging onto pull-out frame 1 Removable bag with handle holes, lacquered beech frame and cream linen bag Size (W x D x H): 480 x 525 x 445 mm PULL-OUT STORAGE UNIT With single extension ball bearing runners Side mounting fixings included : Silver powder coated steel 600 mm = 2 baskets, 790 = 3 baskets Installed height 600 mm mm PULL-OUT SHOE RACK UNIT With single extension ball bearing runners Side mounting fixings included : Silver powder coated steel 600 mm = 2 baskets, 790 = 3 baskets Installed height 600 mm mm PULL-OUT TROUSER RACK With single extension ball bearing runner Side mounting fixings included : Silver powder coated steel PULL-OUT TIE AND BELT RACK With single extension ball bearing runner Side mounting fixings included : Silver powder coated steel SHATTER PROOF OBJECT TRAY For placing onto trouser rails : Powder coated silver coloured rails 2 grey shatterproof trays with glazed finish Length: mm adjustable Width x Height: 100 x 45 mm SHATTER PROOF TRAY BASKETS For hanging onto frame 1 Shatterproof tray with glazed finish Depth: 525 mm Width 240 mm mm mm mm WIRE RAILS FOR TROUSERS For hanging onto frame 1 480/720 mm widths have space for object tray : Silver coloured powder coated steel Size (D x H): 500 x 105 mm Width 485 mm mm HHC.08

87 wardrobe accessories 1 SHOE HOLDER For screw mounting independently or with wall rail Extendible from mm : Chrome-plated polished steel and black or silver coloured plastic mounting parts Chrome/Silver WALL RAIL For screw mounting of shoe holder 1 Overall length: 1120 mm (including end caps) : Black anodised aluminium rail and black plastic end caps Silver coloured SHOE RACK Fits guide carrier or can be mounted with runners Dimensions (W x D x H): 680 x 500 x 110 mm : Chrome-plated polished steel EXTENSION BASKET Fits guide carrier or can be mounted with runners Dimensions (W x D x H): 680 x 500 x 160 mm : Chrome-plated polished steel GUIDE CARRIERS Complete with guides for shoe rack and basket Dimension (W x D x H): 65 x 495 x 475 mm : Chrome-plated polished steel frame and galvanised steel guides RUNNERS To use with shoe rack and extension basket instead of guide carrier, can be mounted directly to carcase : Chrome-plated polished steel Full extension Part extension HHC

88 wardrobe accessories Trouser extension ( ) Trouser extension ( ) Tie and belt extension ( ) TIE EXTENSION For 29 ties To be used left or right Dimensions (W x D x H): 130 x 450 x 80 mm TIE AND CUFFLINK EXTENSION For 16 ties To be used right handed Dimensions (W x D x H): 130 x 455 x 80 mm : Silver anodised, translucent plastic TROUSER EXTENSION For 4 pairs of trousers To be used left or right Dimensions (W x D x H): 220 x 450 x 80 mm : Silver anodised, translucent plastic TIE EXTENSION For 17 ties To be used left or right Dimensions (W x D x H): 74 x 455 x 87 mm : Chrome-plated polished steel and white powder coated steel guide cover TIE AND BELT EXTENSION Complete with guide and spacer Dimensions (W x D x H): 74 x 455 x 118 mm : Chrome-plated polished steel TROUSER EXTENSION For 10 pairs of trousers To be used left or right Dimensions (W x D x H): 465 x 505 x 100 mm : Chrome-plated polished steel and white powder coated steel guide cover TIE RACK Dimensions (W x D x H): 425 x 22 x 28 mm Material: Steel rail and zinc alloy rail mounts : Nickel-plated, polished COAT HANGER Hinged, for screw fixing to side panel Length: 320 mm Swinging angle: 35º-55º Mounting plate: Ø60 mm : Chrome-plated, polished steel EXTENDING WARDROBE RAIL Load capacity: 10 kg : Nickel-plated steel rail and plastic coated white runner Length 290 mm mm mm mm HHC.08

89 wardrobe accessories blah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah blahblah blah SHOE RAIL AND BRACKETS Wardrobe rails are the quickest and easiest way to create hanging space. WARDROBE RAIL Dimensions (H x W x L): 30 x 15 x 1 mm : Chrome plated steel Length 1.5 m m WARDROBE RAIL With fluted design Dimensions (H x W x L): 30 x 15 mm x 3.6 mtr : Silver anodised SHOE RAIL - CUT TO SIZE Ø19 mm Length: 762 mm Material: Aluminium, anodised Chrome, polished Aluminium, satin WARDROBE RAIL SUPPORT Includes 3 screw holes : Nickel-plated Includes 1 screw hole and two locating pins. : Nickel-plated WARDROBE RAIL CENTRE SUPPORT : Chrome-plated SHOE RAIL BRACKET Connects the shoe rail to the side panel using 32 mm line bore holes with 5 mm press in dowels Material: Aluminium, anodised Black Requires mounting rail, order separately. HHC

90 wardrobe accessories COAT HOOK Includes 1 piece Size (W x D x H): 18 x 35 x 60 mm : Aluminium, polished COAT HOOK Includes 1 piece Size (W x D x H): 17 x 41 x 47 mm : Silver coloured, satin anodised aluminium COAT HOOK Includes 1 piece Size (W x D x H): 18 x 93 x 158 mm : Silver coloured, anodised aluminium COAT HOOK Includes 1 piece Size (W x D x H): 19 x 78 x 56 mm : Silver coloured, anodised aluminium With hard rubber cap COAT HOOK Includes 1 piece Size (W x D x H): 21 x 33 x 40 mm : Aluminium, polished COAT HOOK Includes 1 piece Size (W x D x H): 60 x 32 x 50 mm : Aluminium, polished COAT HOOK Includes 1 piece Length: 51mm Ø15 mm : Stainless steel, satin WARDROBE HOOK Includes 1 piece and mounting material Ø20 mm Depth: 100 mm Brushed, stainless Satin stainless steel RETRACTABLE HOOKS COAT HOOK Includes 4 concealable hooks, with decorative black mirrored finish Length: 600 mm : Polymide plastic and glass HHC.08

91 wardrobe accessories WARDROBE LIFT For screw mounting to wardrobe side panels Includes Ø28 mm clothes rail with adjusting mechanism Load capacity: 10 kg Width: mm Alu/alu Nickel-plated/Black Width: mm Silver/Grey Nickel-plated/Black WARDROBE LIFT For screw mounting to wardrobe side panels Includes Ø28 mm clothes rail with adjusting mechanism Width: mm Load capacity: 15 kg : Nickel-plated metal and black plastic PIVOT SLIDING MIRROR With single extension runners Side mounting fixings : mirror Pivot Pull-out mirror slides out from the cupboard and pivots to the left HHC

92 built-in foldaway bed QUICK ASSEMBLY TECHNOLOGY Pre-mounted bearing plates, gas loaded springs and foot linkage enable simple assembly and saves time Sturdy torsion free steel pipe frame, powder coated in anthracite colour Timber slatted frame support in laminated beech Head to foot adjustment Mattress retainer Automatic foot mechanism - integrated feet extend automatically on opening and retract on closure Self-lubricating bearings and the concealed mounted gas loaded springs allow the bed to be effortlessly opened and closed. LGA quality certificate Installation drawings enclosed BETTLIFT BUILT-IN FOLDAWAY BEDS For single beds, vertical or side-folding BETTLIFT FOLDAWAY BED Vertical single bed Installation height: 2100 mm Plinth height: mm Retaining straps for bed linens: 3 pieces Safety stops: 2 pieces Load capacity: kg With mattress Without mattress Order two single beds and one centre support fpr double bed Side-folding single bed Installation height: 1100 mm Plinth height: mm Retaining straps for bed linens: 3 pieces Safety straps: 2 pieces Load capacity: kg Mattress size size mm 900 x 2000 x x 2000 x Vertical folding bed Side-folding bed CENTRE SUPPORT For connecting two single beds to make a double bed : Powder-coated anthracite, steel MATTRESS MATTRESS Specification: pure cotton liners, wool on both sides, quilted with the HYPERFLEX foam core, cotton drill, elastic terry cloth Cover: Removable with zipper on 3 sides and dry-cleanable single double SECURING BRACKET To prevent carcase of foldaway beds from tipping : Powder-coated anthracite, steel HHC.08

93 Home Entertainment LCD/plasma screen units plasma/t.v. monitor supports audio/video storage HHC

94 plasma tv lift & LCD kitchen tv s The plasma screen elevation system, allows your plasma screen TV to be hidden out of sight and easily accessible with the infrared remote control, when your family wants to watch your favourite television programmes. PLASMA TELEVISION LIFT Includes 24V transformer, power outlets for TV and DVD and up/down switch Load capacity: 80 kg Home Office : Black steel To fit screen size 42 inch inch INFRARED REMOTE CONTROL (NOT SHOWN) For plasma TV electric elevating system with coding system, consisting of transmitter and receiver " LCD/TV/DVDMP3 DC 12V-24V / 240V Weight 1.2 kg Built-in DVB-T and analogue tuner Built-in FM transmitter USB port and card reader (SM/MS/MS-Pro/MMC) Composite AV in / AV out function AC-DC adaptor, AV cable Earphones, remote control, ATV antenna, 12V car plug, accessories case Power consumption: 20W " LCD/TV/DVD DC 12V / 240V Weight: 5.2 kg Anti-shock/vibration USB port and card reader (SD/MS/MMC) Stereo audio inputs Full scart. AV input, YPBPR, S-video, PC Video/Audio in, HDMI, CI, AC-DC adaptor, AV cable Remote control, 12V csr plug Power consumption 30W º º 120º º -20º DROP DOWN TV BRACKET 360 ROTATION Max. load 5 kg Cat. No SINGLE ARTICULATION WALL BRACKET Max. load 20 kg SLIDE OUT LCD BRACKET Can be fixed to any side of the cabinet to allow for a multitude of design options 180 swivel horizontal or vertical : Aluminium, silver anodised Max. load 12 kg HHC.08

95 audio / video storage STICK ON MULTIMEDIA RAILS Holds up to 25, depending upon media type Supports DVD, CD or video cassette Adhesive strips supplied and two countersunk screw holes for each side for screw mounting : Black plastic DISC CASE STORAGE RAIL Supports up to 23 CD cases : Black plastic Attaches on underside using adhesive strips AUDIO CASSETTE STORAGE RAIL Supports up to 15 cassette cases : Black plastic Attaches on underside using adhesive strips VHS TAPE STORAGE RAIL Supports up to 10 VHS tapes : Black plastic Attaches on underside using adhesive strips Press to lock the CD/DVD DIVIDERS Supports LP s, books and CD s Inserts into Ø5 mm holes : Galvanised steel For CD s Height x Width 115 x 96 mm For records and books Height x Width 192 x 192 mm POP-OUT CD STORAGE RACK Storage capacity: 20 single CD s Pop-out feature is by double plastic lug springs : Black plastic POP-OUT DVD STORAGE RACK Storage capacity: 15 DVD s Pop-out feature is by double plastic lug springs : Black plastic Press for automatic release HHC

96 Home Office Accessories office accessories cable sets Ellipta systems desk and table legs furniture castors 96 HHC.08

97 home office furniture accessories TOOL BAR SET With tool bar, end caps, clamps and fitting elements : Brushed aluminium posts, black plastic Length 800 mm mm REAR PANEL SET Complete set includes panel wall with end profiles and fittings : Brushed aluminium posts, black plastic Length 800 mm mm LANDSCAPE A4 INTEGRAL TRAY Size (W x D x H): 395 x 280 x 62 mm Material: Plastic Anthracite Opaque PORTRAIT A4 INTEGRAL TRAY Size (W x D x H): 272 x 350 x 62 mm Material: Plastic Anthracite Opaque STACKING BARS For stacking Integral trays : Anthracite coloured plastic 2 tray set tray set A4 STATIONARY INTEGRAL TRAY Size (W x D x H): 388 x 166 x 95 mm Material: Plastic Anthracite Opaque SWIVEL TRAY For mounting under shelf, cabinet or worktop Includes 2 adjustable dividers Material: Strong durable plastic Colour Opaque HHC

98 combi-line accessories CD storage racks not available. 1 PROFILE Fixing holes at 200 mm intervals Length: 2 metres : Aluminium coloured plastic END CAP : Silver coloured plastic PROFILE INSERT For use with Combi-Line profile, to conceal fixing grooves where left visible Length: 1 metre : Aluminium coloured plastic MAGNETIC PIN BOARD Includes board and four magnets Size: 210 x 210 mm : Aluminium coloured steel ADAPTOR FOR TRAYS Enables Integral trays to be used with Combi-Line system : Aluminium coloured plastic SHELF CLAMP For use with Combi-Line products Includes 1 left hand and 1 right hand clamp for 16 mm board thickness : Silver coloured plastic HHC.08

99 cable sets CABLE SET For press fitting into Ø80 mm holes 2 piece oval with 1 outlet Trim cap can be removed : Black and silver coloured plastic CABLE SET For press fitting into Ø80 mm holes 2 piece oval with 2 outlets Trim cap can be removed : Black and silver coloured plastic CABLE SET With spring-loaded rotation segment in cover : Plastic For press fitting into Ø60 mm holes Colour Stainless steel colour Silver For press fitting into Ø80 mm holes Colour Stainless steel colour Silver CABLE SET With spring-loaded rotation segment in cover : Plastic For press fitting into Ø60 mm holes Colour Charcoal White Light Grey Sepia Brown Black For press fitting into Ø80 mm holes Colour Charcoal White Light Grey Sepia Brown Black EXTENDING PENCIL TRAY For screw mounting beneath the desk top, compartments allowed for pens, pencils and documents up to A4 Includes mounting template and fixing material Runner extension: 320 mm Material: Plastic Black Grey VERTICAL CABLE GUIDE For concealing cables and cords under the desktop With strain relief, weighted with base Includes table top adaptor for screw fixing, cable guide and floor adaptor Can be lengthened and shortened by adding and removing links Material: Plastic Length: 1500 mm Colour Translucent white Silver Length: 2900 mm Colour Translucent white Silver Ceiling rose for fixing to ceiling tiles Colour Silver HHC

100 ellipta tool bar & desktop systems ELLIPTA POWERED TOOL BAR For desktop thickness mm : Powder coated silver diecast and extruded aluminium Dimension 910 mm x 2 GPO mm x 4 GPO mm x 4 GPO Desktop Accessories PHONE TRAY : Silver powder coated steel CABLE BASKET : Silver powder coated steel MOBILE PHONE TRAY : Silver powder coated steel HHC.08

101 desktop & organisation accessories Ideal for kitchen island benchtops or home office, the Vertical Powerdock is recessed, so it sits flush with the furniture top when not in use. It is also easy to install or retrofit. Available in silver colour aluminium/black or champagne/beige. The 4 GPO champagne version, as shown, features one GPO remaining below bench level. Ideal power connection for a dishwasher in the kitchen or a computer in the study. The unique champagne colour is the perfect option to match light coloured or stone benchtops VERTICAL POWERDOCK - 10 AMP For home office Recessed flush when not in use Includes concealed power with prefitted 2 metre lead with 10 Amp power lead and 3 pin plug Material: Robust aluminium with polycarbonate and ABS plastic components 2 x GPO Silver x GPO Champagne Desktop Organisation WIRE DOUBLE TIER CABLE CHANNEL Material: Steel wire, powder-coated grey Length 650 mm mm mm mm Self-taping thread 18 Ø6 CABLE HOOK Provides simple yet functional cable management Self-tapping wood thread for Ø5 mm holes Material: Re-inforced nylon, black Length HORIZONTAL MOUNTING PLATE For horizontal positioning of computer : Black powder coated steel CPU HOLDER For securing CPU, DVD player or Video recorder below the table top, screw-on plate With extending guide track (76 mm), quick action straps (up to 1,630 mm perimeter) and protective padding Material: Steel screw-on plate with plastic parts and nylon straps : Black powder coated screw-on plate Load bearing capacity: 34 kg Installation length: 451 mm Adjustability: 360º Supplied with fixing materials and instructions HHC

102 ellipta flatscreen arm Thinking space is not just room to move your mind, it s an environment that nurtures ingenuity, productivity and creativity. It improves the way individuals work, to help improve your business. The Ellipta flat screen arm offers a unique spring tension design, which allows feather-light height adjustment at just the touch of a finger. It also provides ergonomic benefits and enables dynamic, multi-screen use to elevate your professional capabilities. 1 SHORT ARM Swivel and tilt only, no spring needed Extension: 80 mm Colour Silver Black Choosing the correct Ellipta arm and Mount combination is as easy as 1, 2, 3-1 Select your flatscreen arm and note its weight 2 Select your Ellipta Arm based on its required length and spring strength 3 Select your method of mounting 2 MEDIUM ARM All movement Extension: mm at full extension Supports LCD screens weighing between - Standard: 3 kg and 5 kg (most inch flat screens) Heavy duty: 5 kg and 7.5 kg (most flat screens up to 24 inches) Medium arm + Standard spring Colour Silver Medium arm + Heavy duty spring Colour Silver LONG ARM All movement with extension arms Extension: mm at full extension Supports LCD screens weighing between - Standard: 3 kg and 5 kg (most inch flat screens) Heavy duty: 5 kg and 7.5 kg (most flat screens up to 24 inches) Long arm + Standard spring Colour Silver Black Long arm + Heavy duty spring Colour Silver Black HHC.08

103 flatscreen arms mounting systems THROUGH DESK - DESK MOUNT Secured through Ø60 mm hole cut in desk top Provides a more secure mount for heavier screens EDGE CLAMP - DESK MOUNT Secured to the edge of the desk Maximum 33 mm desktop thickness Colour Silver Black Not recommended for dual screens with net weight over 7.5kg. DUAL ARM ADAPTOR KIT Allows 2 arms to be supported on one desk leg Due to additional weight, the through desk mount is recommended. WALL MOUNT Attaches the Ellipta arm directly to the wall HHC

104 desk & table legs SQUARE TABLE/DESK LEG With adjustable foot + 20 mm 60 mm Square Top fixing plate is welded to leg Material: Powder coated or plated steel Chrome, polished Brushed steel Silver coloured Black satin E-LEG WITH ADJUSTABLE FOOT Includes fastening material Adjustable foot +25 mm Height: 690 mm, Ø60 mm Load rating: approx. 100 kg per leg : Plated or powder coated steel legs, Black plastic leveller and black steel mounting plate Polished chrome Black gloss Brushed steel Silver E-LEG WITH BRAKE CASTOR Includes mounting plate and castor with brake Height: 690 mm, Ø60 mm Load rating: approx. 50 kg per leg : Steel-plated or powder coated legs, Matt black nylon and galvanised steel castor and Black steel mounting plate Polished chrome Black gloss Brushed steel CONICAL TABLE/DESK LEG With height adjustable glide, + 10 mm Height: 710 mm (including mounting plate) Leg diameter: Ø42 mm Material: Steel table leg, plastic glide and zinc alloy mounting plate Chrome, polished Stainless steel colour, gloss CONICAL TABLE/DESK LEG With height adjustable glide, + 15 mm Height: 710 mm (including mounting plate) Leg diameter: Ø60 mm Material: Steel table leg, plastic glide and zinc alloy mounting plate Chrome, polished Silver HHC.08

105 furniture castors Castors designed for living space Ideal for shop fitting and display 40 and 60 kg load capacity safely suits working furniture Galvanised housing, black wheel and grey running surface German made With brake Steel housing, galvanised. Wheel and swivel brake. Plastic polamide wheel. Solid rubber running surface. FURNITURE CASTOR Wheel diameter 50 mm Capacity: Up to 40 kg per castor Mounted height: 71 mm With brake Without brake Wheel diameter 75 mm Capacity: Up to 60 kg per castor Mounted height: 100 mm With brake Without brake A Swivelling mounting plate. B M10 threaded bolt. Grey plastic, two-tone. FURNITURE CASTOR, SWIVELLING PLATE Wheel diameter 70 mm Capacity: Up to 100 kg per castor Mounted height: 87 mm With brake Without brake A Without brake With swivelling threaded bolt, steel galvanised Wheel brake. With brake With swivelling mounting plate, steel galvanised FURNITURE CASTOR, M10 THREADED BOLT Wheel diameter 70 mm Capacity: Up to 100 kg per castor Mounted height: 80 mm With brake B HHC

106 Lighting wall mounted lighting shelves down lighting task lights led lights profile system halogen lights deck lighting Gera Leuchten + Licht System HHC.08

107 LED lighting DECK LIGHT Waterproof deck light 0.5 watt with 750 mm lead : Zinc alloy with stainless steel finish Dimensions: Ø48-50 mm cut out, Ø60 mm outside Light Colour White Warm white Blue Green Yellow Red TRANSFORMER 240 TO 12V - 20W Includes plug and lead Can run up to 30 lights Colour: Black LEAD ADAPTOR For the distribution of power to a number of deck lights Colour: Black plastic Lead adaptor 2 way way EXTENSION LEADS For connecting transformer to lead adaptor between lead adaptors Colour: Black lead Length 1 metre metres metres metres metres AUTOMATIC LIGHT SENSING SWITCH Enables the system to turn on when the sun goes down and turn off when the sun comes up. Color: Black LED CABINET LAMP For use in cabinetry and furniture applications, kitchen cabinets. Surface for recess mounted 66 mm installation hole Features: Low power consumption 3 x 1W LED s : Silver coloured plastic outer, silver coloured metal body LIGHT KIT SETS Kit set includes 3 LED lights for surface mounting or recessing into a Ø25 mm hole, transformer, distribution block, mains lead and instructions Power: 1 watt : Silver plastic Colour Warm white Cool white INDIVIDUAL LIGHTS To be used with transformers (order separately) Lights come standard with: 1 watt x 1 lamp with 1.2 metre lead and plug Colour Warm white Cool white TRANSFORMER 700 ma, 1.83 metre mains lead and distribution block for up to 6 LED lamps To be used in conjunction with individual lights Go Green! LED = Light Emitting Diode lights emit minimum heat and save energy! With a lifespan of approximately 50,000 hours, there is virtually no need to replace the bulbs. HHC

108 LED lighting LED = Light Emitting Diode lights emit minimum heat and save energy! With a lifespan of approximately 50,000 hours, there is virtually no need to replace the bulbs. RECESS MOUNTED LED LIGHT Recess mounted with 34 mm Ø 22 mm depth 1.2W warm white 60 lens Natural white Aluminium Warm white White RECESS MOUNTED LED LIGHT Recess mounted with 35 mm Ø 12 mm depth 1.2W warm white 50 lens Aluminium White LED DISTRIBUTOR BLOCK 2 way with 1 m lead way with 3 m lead RECESS MOUNTED LED LIGHT Recess mounted with 44 mm Ø 21 mm depth Tilting 1.2W 60 lens Natural white Aluminium Warm white White HHC.08

109 LED lighting SUPER SHALLOW RECESS MOUNTED LED LIGHT Super shallow 11 mm recess mounting 56 mm Ø Brushed aluminium anodised, warm white 3 x 1W Cat No Surface mounting ring, aluminium anodised White, warm white, 3x1W Surface mounting ring, aluminium white RECESS MOUNTED LED LIGHT Recess mounted 53 mm or 53 x 105 mm 17 mm depth Tilting natural white 60 lens Wattage 1 x 1.2W x 1.2W LED DRIVERS 8 x 1W or 6 x 1.2W Cat No x 1W or 10 x 1.2W x 1W or 15 x 1.2W RECESS MOUNTED LED LIGHT 3 x 1.2W Natural White recess mounting Fixed gimbal, 60 mm Ø 27.5 mm H Cat No Tilting gimbal, 70 mm Ø 32 mm H HHC

110 LED light bar sets COLOUR CHANGING 9 LED LIGHT BAR LED light bars can be mounted in aluminium profiles LED colour: Red, green and blue Material: 9 LED lights encased in insulating, clear plasic profile Wattage: 1.6W LED CONNECTION CABLE For connecting 2 LED light bars. The flexible cable allows the LED light bars to be connected around corners Material: Plastic, white Length mm POWER SUPPLY UNIT With switch and distributor. Maximum 9 LED light bars can be connected to the transformer Material: Plastic, white Length mm DISTRIBUTION CONNECTION CABLE For connecting distributor to LED light bars Material: Plastic, white Length mm Length Length PROFILE FOR LED LIGHT BAR Recess mounted profile for use with LED light bars Material: Aluminium, Cover: frosted plastic : Anodised Length mm : Stainless steel colour Length mm END CAP HHC.08

111 LED light bars COMPLETE LIGHT BAR KITS Kit includes: 4 x 300 mm LED light bars 2 x Short connecting leads 3 x 2.5 metre connecting leads 1 x Distributor box 3 x End plugs 8 x Fixing screws 7 x Pieces of double sided tape 1 x Power supply with inline switches 1 x Power supply with fixing clip Colour Cool white Warm white Open Closed Closed 10 9 Open LED LIGHT BAR PACK, 4 LENGTHS 15 LED light bar, for indoor use only Power: 0.6W Length: 300 mm Material: Encased in insulation, clear plastic profile Mounting: LED bar can be mounted via connecting clip or double sided tape included Colour Cool white Warm white Blue Red Green Yellow LED CONNECTION CABLE For connecting 2 LED light bars The flexible cable allows LED light bars to be connected around corners : White plastic Length 300 mm mm DISTRIBUTION BOX For connecting distributor to LED light bars Material: White plastic POWER SUPPLY UNIT Maximum of 6 LED light bars can be connected to the transformer Includes: 1 x 240V/16W transformer with inline switch 1 x 2000 mm mains lead Material: White plastic HHC

112 LED strip lighting LED strip lighting creates great ambience while being practical and low cost. FLEXIBLE SMD LED STRIP Shock and vibration resistant decorative lighting on archways, ceilings, edge lighting, back lighting for signage, emergency exit etc. Waterproof and long-life, as well as low power consumption (26 watts) Roll includes two plugs for transformers, one at either end to allow for ease of cutting and re-use. Power: Runs on 12V/DC car type battery or DC transformer (see below) Length: 5 m roll Material: Encased in insulation, clear plastic profile Mounting: LED bar can be mounted via connecting clip or double sided tape included Colour Cool white Warm white Blue Red Green Yellow LED BAR LIGHTS LED strip lighting can be interconnected for longer lengths 1.6W (L x W x D) 310 X 18.5 X 8 mm W (L x W x D) 606 X 18.5 X 8 mm W (L x W x D) 902 X 18.5 X 8 mm Drivers 24V DC For light bar only 10W W TRANSFORMER For use with above lighting : Black LED STRIP LIGHT WITH MOTION SENSOR 230V With integrated balast Cab. Width 450 mm mm mm mm mm mm HHC.08

113 high voltage lighting SURFACE MOUNTED TASK LIGHT 240V, 50/60Hz Size (W x H): 78 x 26 mm : Plastic Length: 320 mm, Wattage: 8W White Nickel, satin Aluminium Length: 550 mm, Wattage: 13W White Nickel, satin Aluminium RECESS MOUNTED TASK LIGHT 240V, 50/60Hz Size (W x H): 78 x 22 mm Apperture height: 12 mm : Plastic Length: 366 mm, Wattage: 8W White Length: 578 mm, Wattage: 13W White LEAD AND PLUG For surface mounted task light : White plastic Length: 2000 mm ADAPTOR For butt joint assembly of surface mounted light and input element (lead and plug) : White plastic CONNECTION LEAD For joining surface mounted task lights : White plastic Length 300 mm mm mm mm W SWIVELLING LIGHT When sliding door opens the light will automatically switch on and then off once closed. Integrated transformer Colour Aluminium Black HHC

114 halogen lighting RECESSED MOUNTED HALOGEN LIGHT Press fit into Ø55 mm installation hole. Includes 2000 mm input lead, mounting instructions, complete with bulb installed Use with Häfele power supply only. Can be used surface mounted with optional ring 10W Colour White Black satin Polished gold Polished chrome Chrome satin Nickel satin W Colour White Black satin Polished gold Polished chrome Chrome satin Nickel satin PHOEBE RECESSED MOUNTED LIGHT Press fit into a 55 mm installation hole with either 24 mm (10W) or 29 mm (20W) depth : Chrome polished Wattage 10W W : Nickel matt Wattage 10W W W TRIANGULAR HALOGEN LIGHT Dimensions: 130 x 122 x 40 mm : Stainless steel TRANSFORMER VA For up to 3 x 20W 6 x 10Wl M LEAD Wth bare ends and three pin plug DISTRIBUTOR BLOCK 3 way way HHC.08

115 halogen lighting Halogen down lights not only increase visibility in preparation areas, but help create a unique look for the modern kitchen. Halogen down lights also add ambiance, mood, atmosphere and colour in living and dining areas, helping to create the right look and feel in your living space. LOW HEAT HALOGEN LIGHT 20W Press fit into a 78 mm installation hole White Chrome Brass Satin nickel Satin chrome SAMOA SENSOR LIGHT 20W Press fit into a 58 mm installation hole Polished chrome Stainless steel W CALLISTO SENSOR LIGHT Press fit into a 65 mm installation hole With automatic switch-off : Stainless steel Polished chrome Stainless steel TRANSFORMER With 6way distributor and mini plug For use with switches on page W W TRANSFORMER With 6way distributor and Aus/NZ plug 60W W HHC

116 low voltage lights 12 VDC RECESS FLUSH MOUNTED LIGHT 78 mm diameter cut-out White Chrome Satin nickel SEMI RECESSED LIGHT 78 mm diameter cut-out White Chrome Satin nickel SEMI RECESSED ANTI-GLARE LIGHT 78 mm diameter cut-out White Chrome Satin nickel SURFACE MOUNTED LIGHT White Chrome Satin nickel QUADRO RECESS MOUNTED LIGHT 78 mm diameter cut-out Translucent White Chrome Satin nickel RONDO C FLUSH MOUNTED LIGHT White Chrome Satin nickel RONDO B SEMI-RECESSED MOUNTED LIGHT 78 mm diameter cut-out White Chrome Satin nickel RONDO A SEMI RECESSED MOUNTED LIGHT 78 mm diameter cut-out White Chrome Satin nickel HHC.08

117 low voltage lights 12 VDC LED LAMP 2.7W Cool white Warm white LIGHT DISC PRISMA 6W Cool white Warm white LIGHT DISC OPAL 6W Cool white Warm white Day light DOOR CONTACT SWITCH 230V / 2A RECESSED SWITCH 2 M LEAD 78 mm diameter cut-out White Chrome Satin nickel SPACER RING 5.5 MM Reduces installation depth 11.5 mm White Chrome Satin nickel SENSOR SWITCH WITH AUS/NZ PLUG White Chrome Satin nickel SUPPLY LEAD 3 M WITH AUS/NZ PLUG Female mini socket Length 1 m extension lead m extension lead SUPPLY LEAD 3 M WITH AUS/NZ PLUG 6 way distributor SUPPLY LEAD 3.5 M WITH AUS/NZ PLUG 6 way plus switch inlet HHC

118 halogen lighting The Midway profile system is an easy way to add lighting and power in your kitchen without using valuable work space. STRIP LIGHT For screw mounting to underside of cabinet Midway profile accessories can be hung from the strip light 240V : matt chrome plastic Cat.No. 8W 450 mm W 600 mm W 900 mm W 1200 mm DOUBLE SOCKET For screw mounting to underside of cabinet Can be used in conjunction with strip light : matt chrome plastic For the Linero hanging accessories above go to page 64 Wall mounted lighting offers Style, Comfort and Clarity in the kitchen and also works as an accent piece in your living area or bar. WALL MOUNTED LIGHTING SHELVES 230V, 50/60Hz Length 450 mm Wattage: 8W Stainless steel Silver colour anodized Length 500 mm Wattage: 8W Stainless steel Silver colour anodized Length 600 mm Wattage: 13W Stainless steel Silver colour anodized Length 900 mm Wattage: 21W Stainless steel Silver colour anodized Length 1200 mm Wattage: 28W Stainless steel Silver colour anodized HHC.08

119 Häfele Design Centres Auckland East Tamaki Wellington Christchurch The four Häfele Showrooms capture the very spirit of home design. Featuring a collection of the finest home and living fixtures from around the globe, the Häfele Design Centres offer opportunities and ideas to invest in your home environment and to develop your financial asset. To experience the world of home design and architectural fittings at one venue, visit the Häfele Design Centre in your area. Eastern Design Centre (H/O) 16 Accent Drive, East Tamaki, Auckland Auckland Design Centre 62 Cook Street, Auckland City, Auckland Wellington Design Centre The Wool Store Level 1, 262 Thorndon Quay, Wellington Christchurch Design Centre 5 Wigram Close, Sockburn, Christchurch Häfele Architectural Hardware The choice is yours Functionality, reliability and quality are the main selection criteria when deciding which products to include in our range. We now have an extensive collection of project hardware, architectural and interior fittings which are at the forefront of innovation and design. The first edition of The Complete Häfele Architectural Hardware is an important reference for innovative products & ideas. Updated regularly, the diverse range of quality products are designed to improve the functionality of residential, commercial, retail and hospitality products. For further information contact our Häfele sales office on HAFELE or visit HHC