Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
|
|
|
- Ferdinand Bates
- 7 years ago
- Views:
Transcription
1 3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve's advanced sliding gate seat for closer control and greater accuracy. Jordan's unique sliding gate control valve trim teams up with pressure, temperature ph, level, or flow controllers for fast response, long term reliability, and high levels of accuracy on steam, gas, liquid and chemical services. Consisting of a modulating disc and stationary plate, the sliding gate seat components are slotted with multiple orifices that align to provide the precise flow needed to maintain the process requirements. The valve strokes in a fraction of the travel required by conventional control valves for rapid correction of any deviation from the process setpoint. This brochure includes the following Series: MK7: a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve's advanced sliding gate for closer control and greater metering accuracy MK7PG: a pump governor with its control port connected to the pump discharge line. The valve throttles to maintain a constant pump discharge by controlling the steam flow to the pump. MK71/72: for higher capacity requirements. MK77: features an equal percentage flow characteristic. MK711: a linear control valve in sizes up to 6" with Cv's to 395 MK74: controls fugitive emissions while reducing the risks associated with toxic, corrosive, explosive and high temperature fluids CRN Registration Number Available Features Totally enclosed multi-spring actuator minimizes deadband and is field reversible without the use of special tools or additional parts Compact design and simple construction allows fast, simple installation and easy maintenance Sliding gate seats provide: Straight-through flow for reduced turbulence and quiet operation Short stroke for fast response and accurate control Easily interchangeable Cv's Tight shutoff due to overlap of seat closure area Stem packing is four times deeper then stem travel for greater protection against leakage Jordan Valve a division of Richards Industries 317 Wasson Road Cincinnati, OH (f) info@richardsind.com Pneumatic Control Valves Mark 7 Sliding Gate Control Valves
2 Mark 7 Sliding Gate Control Valves Specifications s: (note: 1/4" & 3/8" sizes use 1/ body with reducers) Mark 7/7PG: 1/4" through (DN8 through DN5) Mark 77: 1/ through 6" (DN8 through DN15) Mark 711: 2-1/ through 6" (DN65 through DN15) End Connections Threaded (NPT, BSPT, BSPP through sizes/dn5) ANSI Flanges (15#, 3#) DIN Flanges (PN1/16, PN25/4) Body s Ductile Iron Bronze (1/ /DN15 - DN5) Carbon Steel (WCB) Stainless Steel (CF8M) Trim s 33SS for CI and DI body valves 316SS for SS body valves Seat s Jorcote on SST standard Yoke : Cast Iron Actuator: Steel Diaphragm: Buna-N (standard to F/93 C) Stem Packing: spring-loaded Teflon (to 45 F/232 C); Graphite (to 1 F/649 C) Service: Steam, water, oil, gas, air and chemicals Shutoff: ANSI Class IV Ranges Mark 7/77/711: 3-15, 3-9, 9-15, 6-3 psi (,21-1,3;,21-,62;,62-1,3;,41-2,7 bar) Mark 7PG: consult factory for ranges Action Direct (air signal closes valve) Reverse (air signal opens valve) Positioner: side or top-mounted positioners are available to overcome the normal hysteresis for a control valve and actuator, and to ensure that the valve stem position is always directly proportional to the control valve command signal. See the Positioner section for more details. Rangeability MK7: 1/ 1-1/, 1:1 MK7:, >:1 MK711: 2-1/ 3", >:1 MK711: 4" 6", 1:1 MK77: all sizes 1:1-2-
3 Mark 7 Sliding Gate Control Valves Cv Values and Maximum Allowable Differential Pressure Ratings Mark 7 Flow Coefficient Cv 2.5 or or 9.5 Kv 2,2 or 3,8 5,5 or 8, ,9 25 or 3 21,5 or 25,8 Valve 1/ & 3/4" (DN15 & 2) 1" & 1-1/4" (DN25 & 32) 1-1/ (DN4) (DN5) Seat Based on 45 psi (3,1 bar) to actuator or psi Std. 35M Actuator 35M with Positioner Maximum Differential Pressure (PSI) Optional 55M Actuator 55M with Positioner Optional 85M Actuator PSI BAR PSI BAR PSI BAR PSI BAR PSI BAR SST 125 8, , , , ,1 Jorcote 25 17,2 5 34, ,1 7 48, ,9 SST 1 6,9 15 1,3 15 1,3 15 1,3 15 1,3 Jorcote 15 1,3 3 2, , , ,1 SST 75 5, ,6 1 6, , ,6 Jorcote 125 8, , , , , SST 75 5, ,6 1 6, , ,6 Jorcote 125 8, , , , , Mark 711 Standard Actuator: 2-1/ 3": 55M; 4" 6" 85M Flow Coefficient Cv (Kv) Valve Seat Maximum P, PSI* (BAR) Standard w/positioner 85 (73) 2-1/ (DN65) Jorcote 5 (3,5) 275 (19) 13 (112) 3" (DN8) Jorcote 5 (3,5) 275 (19) (172) 4" (DN1) Jorcote 5 (3,5) 325 (22) 395 (34) 6" (DN15) Jorcote 5 (3,5) 225 (16) * Higher P's available with optional larger actuators Mark 77 Standard Actuator: 1/ 3/4": 35M; 1" - 3": 55M; 4" 6" 85M Maximum P* PSI (BAR) Flow Coefficient Seat Valve Cv (Kv) Standard Actuator w/positioner 2.5 (2,2) 1/ (DN15) Jorcote 25 (17,2) 5 (34,5) 4.4, 6.4 or 9.5 (3,8; 5,5; or 8,2) 3/4" (DN2) Jorcote 15 (1,3) 3 (2,7) 11.5 (9,9) 1" (DN25) SST 1 (6,9) 175 (6,9) Jorcote 15 (1,3) 3 (13,8) 13 (11,2) 1-1/4" SST 1 (6,9) 175 (6,9) (DN32) Jorcote 15 (1,3) 3 (23,8) 22 (18,9) 1-1/ SST 1 (6,9) 15 (6,9) (DN4) Jorcote 15 (1,3) 15 (6,9) 34 (29,2) (DN5) SST 1 (6,9) 15 (6,9) Jorcote 15 (1,3) 15 (6,9) 6 (51,6) 2-1/ (DN65) Jorcote 5 (3,5) 275 (19,) 8 (68,8) 3" (DN8) Jorcote 5 (3,5) 275 (19,) 13 (112) 4" (DN1) Jorcote 5 (3,5) 225 (15,5) 23 (198) 6" (DN15) Jorcote 5 (3,5) 15 (6,9) Low Flow: reduced Cv's can be used in any size valve as long as it is a smaller value than is standard for that size. In addition, these low flow Cv's can be provided: ,2,8,4,2,8 (N/A in 316SS) -3-
4 Mark 7 Sliding Gate Control Valves Maximum Working Pressures & Temperatures Mark 7 & Mark 77 (1/ ) (DN15 - DN5) Maximum 1 F, PSI/ F Packing DI Body BRZ Body CS Body SST Body 15# 3# TE 15# 3# TE 15# 3# TE 15# 3# TE Any Maximum Temperature, PSI/ F TEF 17/45 495/45 88/45 15/45 325/45 325/45 17/45 /45 1/45 17/45 48/45 955/45 GRAF 125/65 45/65 715/65 15/5 325/5 325/5 125/65 535/65 175/65 125/65 445/65 89/65 Maximum 38 C, BAR/ Packing DI Body BRZ Body CS Body SST Body 15# 3# TE 15# 3# TE 15# 3# TE 15# 3# TE Any Maximum Temperature, PSI/ C TEF 12/232 34/232 56/232 1/232 22/232 22/232 12/232 41/232 83/232 12/232 33/232 66/232 GRAF 9/343 31/343 49/343 1/343 22/343 22/343 9/343 37/343 74/343 9/343 31/343 61/343 Mark 711 & Mark 77 (2-1/ 6") (DN65 - DN15_ Maximum 1 F, PSI/ F Packing DI Body BRZ Body CS Body SST Body 15# 3# TE 15# 3# TE 15# 3# TE 15# 3# TE Any Maximum Temperature, PSI/ F TEF 17/45 495/45 15/45 325/45 17/45 /45 17/45 48/45 GRAF 125/65 45/65 15/5 325/5 125/65 535/65 125/65 445/65 Maximum 38 C, BAR/ Packing DI Body BRZ Body CS Body SST Body 15# 3# TE 15# 3# TE 15# 3# TE 15# 3# TE Any Maximum Temperature, PSI/ F TEF 12/232 34/232 1/232 22/232 12/232 41/232 12/232 33/232 GRAF 9/343 31/343 1/343 22/343 9/343 37/343 9/343 31/343-4-
5 Mark 7 Sliding Gate Control Valves Pressure-Temperature Charts MK7, MK74 Ductile Iron Stainless Steel Pressure (PSI) Carbon Steel DI/TE/DI 3 DI SS/Has C Bellows 15 DI PTFE Pack. Std. Bolt Pressure (PSI) SS/Has C Bellows 3 SS 15 SS SS/TE PTFE Pack. Std. Bolt CS/TE/SW Pressure (PSI) CS SS/Has C Bellows 15 CS PTFE Pack. Std. Bolt Cast Iron Bronze 5 15 CI 3/TE BR 5 15 CI 3/TE BR Pressure (PSI) 3 Pressure (PSI)
6 Mark 7 Sliding Gate Control Valves Dimensions B C D 1/4" NPT Mark 7: Flanged Ends 1/ 3/4" 1" 1-1/4" 1-1/ ANSI Flange Dimensions (inches) B C D (lbs) 15# # # # # # # # # # # # Mark 7: Threaded Ends 1/ & 3/4" 1" A Dimensions (inches) A B C D (lbs) DI/BRZ CS/SS DI/BRZ CS/SS /4" DI/BRZ / DI/BRZ CS/SS DI/BRZ CS/SS Mark 7: Flanged Ends (metric) DN15 DN2 DN25 DN32 DN4 DN5 ANSI PN Dimensions (mm) B C D (kgs) 1/ ,8 25/ ,7 1/ ,8 25/ ,7 1/ ,7 25/ ,6 1/ ,7 25/ ,6 1/ ,6 25/ ,5 1/ ,8 25/ ,3 Mark 7: Threaded Ends (metric) DN15 & DN25 Dimensions (mm) A B C D (kgs) DI/BRZ ,9 CS/SS ,9 DI/BRZ ,8 CS/SS ,7 DN32 DI/BRZ ,8 DN4 DN5 DI/BRZ ,2 CS/SS ,7 DI/BRZ ,2 CS/SS ,5-6-
7 Mark 7 Sliding Gate Control Valves Dimensions D 1/4" NPT Mark 77: Threaded Ends 1/ 3/4" 1" Dimensions (inches) A B C D (lbs) DI/BRZ CS/SS DI/BRZ CS/SS DI/BRZ CS/SS /4" DI/BRZ / DI/BRZ CS/SS DI/BRZ CS/SS C Mark 77 & Mark 711: Flanged Ends 2-1/ 3" 4" 6" ANSI Flange 125/15# /3# /15# /3# /15# /3# /15# /3# A Dimensions (inches) B C D (lbs) Mark 77: Threaded Ends (metric) DN15 DN2 DN25 Dimensions (mm) A B C D (kgs) DI/BRZ CS/SS DI/BRZ CS/SS DI/BRZ CS/SS DN32 DI/BRZ DN4 DN5 DI/BRZ CS/SS DI/BRZ CS/SS D 1/4" NPT Mark 77 & Mark 711: Flanged Ends (metric) DN65 DN8 DN1 DN15 ANSI Flange 1/ /4 29 1/ /4 31 1/ / / /4 48 Dimensions (mm) B C D (kgs) B C -7- A
8 Mark 7 Sliding Gate Control Valves Ordering Schematic Model Body Mat'l / Model 7 Standard 7SP Standard with Side Positioner 7TP Standard with Top Positioner 77 Equal Percentage 77SP Equal Percentage with Side Positioner 77TP Equal Percentage with Top Positioner 711 Linear 711SP Linear with Side Positioner 711TP Linear with Top Positioner 3 & 4 Trim T3 33SS/TFE Pkg T6 316SS/TFE Pkg I3 33SS/Graphite I6 316SS/Graphite 5 Seat V 33SS/Jorcote W 316SS/Jorcote 5 1/ (DN15) (DN5) 75 3/4" (DN2) / (DN65) 1 1" (DN25) 3 3" (DN8) /4" (DN32) 4" (DN1) / (DN4) 6" (DN15) DI BR CS S6 Body Ductile Iron Bronze Carbon Steel (WCB) Stainless Steel (CF8M) 6 Cv MK7 & MK711 MK (,28) A 25 (22) (2,2) 2.42 (,36) B 3 (26) (3,8) 3.84 (,72) C 5 (43) N 11.5 (9,9) (1,4) F 85 (73) P 13 (11,2) (2,2) G 115 (99) S 22 (19) (3,8) H 13 (112) U 34 (29) (5,5) I (172) 1 6 (52) (8,2) J 395 (341) 2 8 (69) 9 15 (13,) H 13 (112) 3 23 (199) 1 & 2 End Connections PT NPT BT BSPT I5 15# IFE DI above or CS or SST valves F5 15# FE DI below 2-1/ or BR I7 PN1` IFE DI above or CS or SST valves F7 PN1 FE DI below 2-1/ or BR I6 PN16 IFE DI above or CS or SST valves F6 PN16 FE DI below 2-1/ or BR BP BSPP SW FSW I3 3# IFE DI above or CS or SST valves F3 3# FE DI below 2-1/ or BR I8 PN25 IFE DI above or CS or SST valves F8 PN25 FE DI below 2-1/ or BR I4 PN4 IFE DI above or CS or SST valves F4 PN4 FE DI below 2-1/ BR 7, 8, 9, 1, 11, 12 N3Q3N3 Q3Q3N3 7, 8, 9, 1, 11, 12 A3B3A3 B3B3A3 G3B3A3 H3B3A3 A5B5A5 B5B5A5 G5B5A5 H5B5A5 A8B8A8 B8B8A8 G8B8A8 H8B8A8 Mark 7 Series Range & Actuator Range Actuator 3-15 DIR 35M 3-15 REV All Mark 7 Models Range & Actuator Range Actuator 3-15 DIR 3-15 REV 35M 6-3 DIR 6-3 REV 3-15 DIR 3-15 REV 55M 6-3 DIR 6-3 REV 3-15 DIR 3-15 REV 85M 6-3 DIR 6-3 REV -8-
9 Mark 7 Sliding Gate Control Valves Ordering Schematic, Cont. Model Body Mat'l / & 14 Accessories None AR Air Regulator H3 Handwheel 35M Actuator H5 Handwheel 55M Actuator H8 Handwheel 85M Actuator S6 316SS Bolting 15 Action D Air-to-Close R AIr-to-Open 16 I/P None 3 I/P 35M Actuator 5 I/P 55M Actuator 8 I/P 85M Actuator 17 SMP None A SMP DIR/REV 3-15 B SMP DIR/REV 3-9 C SMP DIR/REV 9-15 D SMP/IP DIR/REV 4-2 E SMP/IP DIR/REV 4-12 F SMP/IP DIR/REV 12-2 G MK16IQ-S DIR/REV 4-2 (Hart & FM-App) H MK16IQ-B DIR/REV 4-2 (with gauges) J MK16IQ-FF DIR/REV 4-2 (Fieldbus w/ gauges) Z Non-Standard -9-
10 3L/T-2R/S33 Series Mark 71/72 Series High-Flow and Super High-Flow Control Valves The Mark 71/72 high-flow and super high-flow sliding gate control valves provide: Shorter Stroke than a globe or plug-style valve Faster response Longer packing and seat life Stem packing is four times deeper than stem travel for greater protection against leakage Smaller and lighter weight than globe-style valves Straight through flow Less turbulence, erosion and noise Fewer spare parts Self-cleaning seats No gaskets or o-rings Ease of maintenance Interchangeable seats and Cv's Fewer spare parts Self-cleaning seats No gaskets or o-rings Specifications s: 1/ through (DN15 through DN5) End Connections Threaded (NPT, BSPT, BSPP) ANSI Flanges (15#, 3#) DIN Flanges (PN1/16; PN25/4) Body s Ductile Iron Bronze Carbon Steel (WCB) Stainless Steel (CF8M) Trim s 33SS for CI, DI, BRZ & CS body valves 316SS for SS body valves Seat s Jorcote on SST standard Yoke: Cast Iron Actuator: Steel Diaphragm: Buna-N (standard, to /93 C) Stem Packing: Spring-loaded Teflon (to 45 F/232 C); Graphite (to 1 /649 C) Service: steam, water, oil, gas, air and chemicals Shutoff: ANSI Class IV Ranges: 3-15, 3-9, 9-15, 6-3 psi (,21-1,3;,21-,62;,62-1,3;,41-2,1 bar) Action Direct (air signal closes valve) Reverse (air signal opens valve) Positioner: Side or top mounted positioners are available to ensure that the valve stem position is always directly proportional to the control system output signal. See the Positioner section for more details. Body Rating Ductile Iron up to 988 psi (68,1 1 F (38 C) and 715 psi (49,3 65 F (343 C) Carbon Steel and Stainless Steel up to 144 psi (99 1 F (38 C) and 89 psi (61 65 F (343 C) Bronze up to 5 psi (35 1 F (38 C) and 325 psi (22 5 F (26 C) Temperature limit of -2 F (-29 C) on all materials; -1- for other temperatures, consult factory
11 Mark 71/72 High Flow & Super High Flow Sliding Gate Control Valves B C Dimensions D 1/4" NPT A Mark 71/72: Flanged Ends 1/ 3/4" 1" 1-1/4" 1-1/ ANSI Flange Dimensions (inches) B C D (lbs) 15# # # # # # # # # # # # Mark 71/72: Flanged Ends (metric) DN15 DN2 DN25 DN32 DN4 DN5 ANSI PN Dimensions (mm) B C D (kgs) 1/ ,8 25/ ,7 1/ ,6 25/ ,4 1/ ,6 25/ ,4 1/ ,6 25/ ,4 1/ ,9 25/ ,9 1/ ,7 25/ ,9-11- Cv 6.4 (5,5) 7. (6,) 9.5 (8,2) 15 (12,9) 18 (15,5) 25 (22) 3 (26) 35 (3) 45 (39) 5 (43) 65 (56) 7 (61) Cv Values and Maximum Allowable Differential Pressure Ratings Valve 1/ & 3/4" (DN15 & 2) 1/ (DN15) 3/4" (DN2) 1" & 1-1/4" (DN25 & 32) 1" (DN25) 1-1/4" DN32) 1-1/ & (DN4 & 5) 1-1/ & (DN4 & 5) 1-1/ (DN4) (DN5) 1-1/ (DN4) DN5) Seat Max P, PSI * (BAR) 55M Actuator Mark 71/72: Threaded Ends 1/ 3/4" 1" 1-1/ 35M w/positioner SST 125 (8,6) 15 (1,3) Jorcote (13,8) 25 (17,2) SST 125 (8,6) 15 (1,3) Jorcote (13,8) 25 (17,2) SST 125 (8,6) 15 (1,3) Jorcote (13,8) 25 (17,2) SST 1 (6,9) 1 (6,9) Jorcote 15 (1,3) (13,8) SST 1 (6,9) 1 (6,9) Jorcote 15 (1,3) (13,8) SST 1 (6,9) 1 (6,9) Jorcote 15 (1,3) (13,8) SST 1 (6,9) 1 (6,9) Jorcote 15 (1,3) (13,8) SST 1 (6,9) 1 (6,9) Jorcote 15 (1,3) (13,8) SST 1 (6,9) 1 (6,9) Jorcote 15 (1,3) (13,8) SST 1 (6,9) 1 (6,9) Jorcote 15 (1,3) (13,8) SST 1 (6,9) 125 (8,6) Jorcote 15 (1,3) 15 (1,3) SST 1 (6,9) 125 (8,6) Jorcote 15 (1,3) 15 (1,3) Dimensions (inches) A B C D (lbs) DI/BRZ CS/SS DI/BRZ CS/SS DI/BRZ CS/SS DI/BRZ CS/SS DI/BRZ CS/SS Mark 71/72: Threaded Ends (metric) DN15 DN2 DN25 DN4 DN5 Dimensions (mm) A B C D (kgs) DI/BRZ CS/SS DI/BRZ CS/SS DI/BRZ CS/SS DI/BRZ CS/SS DI/BRZ CS/SS
12 Mark 71/72 High Flow & Super High Flow Sliding Gate Control Valves Pressure-Temperature Charts MK71/72 Ductile Iron Stainless Steel DI/TE/DI 1 1 Pressure (psi) SS/Has C Bellows 3 DI 15 DI PTFE Pack. Std. Bolt Pressure (psi) SS/Has C Bellows 3 DI 15 DI DI/TE/DI PTFE Pack. Std. Bolt Carbon Steel 1 Bronze Pressure (psi) DI SS/Has C Bellows /TE/SW SS PTFE Pack. Std. Bolt Pressure (psi) CI 3/TE BR 15 DI
13 Mark 71/72 High Flow & Super High Flow Sliding Gate Control Valves Ordering Schematic Model Body Mat'l / Model 71 High Flow 71SP High Flow with Side Positioner 71TP High Flow with Top Positioner 72 Super High Flow 72SP Super High Flow with Side Positioner 72TP Super High FLow with Top Positioner 5 1/ (DN15) 75 3/4" (DN2) 1 1" (DN25) /4" (DN32) / (DN4) (DN5) DI BR CS S6 Body Ductile Iron Bronze Carbon Steel (WCB) Stainless Steel (CF8M) 1 & 2 End Connections PT NPT BT BSPT I5 15# IFE DI above or CS or SST valves F5 15# FE DI below 2-1/ or BR I7 PN1 IFE DI above or CS or SST valves F7 PN1 FE DI below 2-1/ or BR I6 PN16 IFE DI above or CS or SST valves F6 PN16 FE DI below 2-1/ or BR BP BSPP SW FSW I3 3# IFE DI above or CS or SST valves F3 3# FE DI below 2-1/ or BR I8 PN25 IFE DI above or CS or SST valves F8 PN25 FE DI below 2-1/ or SST valves I4 PN4 IFE DI above or CS or SST valves F4 PN4 FE DI below 2-1/ or BR 3 & 4 Trim T3 33SS/TFE Pkg T6 316SS/TFE Pkg 5 Seat A 33SST B 316SST V 33SS/Jorcote W 316SS/Jorcote 6 Cv (5,5) A 25 (22) L 6.4 (5,5) B 3 (26) M 9. (7,8) V 35 (31) (8,2) W 45 (39) 9 15 (13) C 5 (43) R 18 (15,5) Y 65 (56) T 24 (21) E 7 (6) 7, 8, 9, 1, 11, 12 A3B3A3 B3B3A3 G3B3A3 H3B3A3 A5B5A5 B5B5A5 G5B5A5 H5B5A5 A8B8A8 B8B8A8 G8B8A8 H8B8A8 Range & Actuator Range Actuator 3-15 DIR 3-15 REV 35M 6-3 DIR 6-3 REV 3-15 DIR 3-15 REV 55M 6-3 DIR 6-3 REV 3-15 DIR 3-15 REV 85M 6-3 DIR 6-3 REV -13-
14 Mark 71/72 High Flow & Super High Flow Sliding Gate Control Valves MK7/616 Ordering Schematic, Cont. 13 & 14 Accessories None AR Air Regulator H3 Handwheel 35M Actuator H5 Handwheel 55M Actuator H8 Handwheel 85M Actuator S6 316SS Bolting 15 Action D Air-to-Close R AIr-to-Open 16 I/P None 3 I/P 35M Actuator 5 I/P 55M Actuator 8 I/P 85M Actuator 17 SMP None A SMP DIR/REV 3-15 B SMP DIR/REV 3-9 C SMP DIR/REV 9-15 D SMP/IP DIR/REV 4-2 E SMP/IP DIR/REV 4-12 F SMP/IP DIR/REV 12-2 G MK16IQ-S DIR/REV 4-2 (Hart & FM-App) H MK16IQ-B DIR/REV 4-2 (with gauges) J MK16IQ-FF DIR/REV 4-2 (Fieldbus w/ gauges) Z Non-Standard Jordan Valve, a division of Richards Industries 317 Wasson Road Cincinnati, OH (f) info@richardsind.com Jordan Valve reserves the right to make revisions to its product, specifications, literature and related information without notice. Please visit our website at for the latest information on our products.
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
DOUBLE SEAT BRONZE BODY HIGH CAPACITY
PS593DB HEAVY DUTY BRONZE GLOBE CONTROL VALVES DB DOUBLE SEAT BRONZE BODY HIGH CAPACITY 1, 1-1/4, 1-1/2, and 2 Union Ends ANSI Class 250 Body Rating ANSI Class II Close off Bronze or Stainless Steel Trim
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
Kämmer Series 185000 Laboratory Valves
flowserve.com Kämmer Series 185000 Laboratory Valves Description Kämmer microflow series 185000 / 285000 and 187000 / 287000 are ½" laboratory valves designed for precision controlling. The bodies in stainless
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
Baumann 81000 Mikroseal Control Valve
Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
GS-General Service Control Valves
GS-General Service Control Valves GS-General Service Valves The GS-General Service Valves continue Copes-Vulcan s tradition of designing and manufacturing control valves that provide both exceptional service
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3
Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves
Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control
REGULATORS D& HD Series
Watson McDaniel reserves the right to change the designs and/or materials of its products out notice. 2002 Watson McDaniel Company Ductile Iron body - HD Series Full port strainer & blowdown valve on pilot
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
TECHNICAL BULLETIN. Kämmer LinedFlow - 132000 Corrosive Application Valves. Experience In Motion FCD KMENTB3221-01 04/12
TECHNICAL BULLETIN Kämmer LinedFlow - 132000 Corrosive Application Valves FCD KMENTB3221-01 04/12 Experience In Motion Description ¼-inch NPT test port Large guided stem area Bellows seal eliminates stem
CCI 100 DPC DRAG Wellhead Production Choke Valve
CCI 100 DPC DRAG Wellhead Production Choke Valve 2 Severe service DRAG choke valve delivers precise wellhead pressure control with superior reliability and life. Improves well production time Enhances
PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM
PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM PRESSURE REDUCER AND RELIEF VALVES These devices are used to reduce and control a gaseous flow pressure (air, steam, gas ). The PRESSURE
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
FlowPak TM General Application Valve 1/2-4, Class 150
FlowPak TM General Application Valve 1/2-4, Class 150 SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital Positioner Type Logix 5si,
Baumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
Overview of the. measurement and control technology range
Overview of the measurement and control technology range precise innovative Precision - Made in Germany Schubert & Salzer Control Systems GmbH is a medium-sized company in the Schubert & Salzer Group with
BULLETIN 70.00-1 OCTOBER 2012. DeZURIK ROTARY DIAPHRAGM ACTUATORS
BULLETIN 70.00-1 OCTOBER 2012 DeZURIK ROTARY DIAPHRAGM ACTUATORS 2 2012 DeZURIK, Inc. Design & Construction DeZURIK rotary diaphragm actuators are available for use on rotary control valves including:
BERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Experience In Motion. Valtek Spring Cylinder Linear Actuators
Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
Series 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.
SITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
SD SEVERE DUTY CONTROL VALVES BULLETIN 1149 JULY 2002
SD SEVERE DUTY CONTROL VALVES BULLETIN 1149 JULY 2002 SD-1000 & SD-700 CONTROL VALVES SD-1000 Control Valves The SD-1000 valve is Copes-Vulcan s premium severe duty and critical service control valve design.
Nozzle Check Valves. NOREVA nozzle check valves are used
Nozzle Check Valves NOREVA nozzle check valves are used in applications where the reverse flow of a fluid has to be avoided. These valves are suitable for all kind of liquid and gaseous fluids and fire
Self-operated Temperature Regulators Type 1 to Type 9. PN 16 to 40 Class 125 to 300 DN 15 to 250 NPS ½ to 10 G ½ to 1 Up to 350 C Up to 660 F
Self-operated Temperature Regulators Type 1 to Type 9 PN 16 to 40 Class 125 to 300 DN 15 to 250 NPS ½ to 10 G ½ to 1 Up to 350 C Up to 660 F Edition April 2012 Information Sheet T 2010 EN Self-operated
Introduction. Angle/Flared/Sequence/Changeover Service Valves. Valves D-193. www.usa.siemens.com/hvac
Introduction Angle/Flared/Sequence/Changeover Service D-193 In this section, you will find flared, angled, sequence and changeover valves for use in service applications. D-194 Need additional assistance?
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Application Tight-closing butterfly valve for process engineering and industrial applications DN 50 to 300 NPS 2 to 12 Nominal pressure PN 10
G. VULCANIZED SEAT Pressure sensitive seating with full disc overlap provides positive seating at high and low pressures.
A B C D G F E J H I A. RETAINER PLUGS Retain hinge and stop pins while providing compression to stabilization spheres. B. STABILIZATION SPHERES Stabilize hinge and stop pins, preventing vibration and wear.
Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
Type 92S Pilot-Operated Steam Regulator
Type 92S Pilot-Operated Steam Regulator Introduction The Type 92S steam regulator is piston actuated for high cycle steam service which includes a Type 6492L, 6492H or pilot (see Figure 1). These pilots
Types 66R and 66RR Low-Pressure Relief Valves
November 2009 Types 66R and 66RR Low-Pressure Relief Valves W1953 W1908 TYPE 66R RELIEF VALVE TYPE 66RR RELIEF VALVE Figure 1. Typical Constructions Introduction Types 66R and 66RR low-pressure throttling
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
ECOTROL control valve
Committed to perfection in every detail Powerful valve actuator The pneumatic multi-spring 812 series actuator shown here is deployed in many applications as a standard actuator. Not only is it robust
VAD. Variable Area Desuperheaters
Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated
WILROY. Operation. Optional Diaphragm Rupture Detection HYDRAULICALLY ACTUATED DIAPHRAGM PUMP
WILROY ATEX Approved HYDRAULICALLY ACTUATED DIAPHRAGM PUMP Williams and Milton Roy have combined technologies to design a pump blending the proven mroy hydraulic by-pass diaphragm design with the Williams
Packing and gaskets Page 029 of 040
Packing and gaskets Page 029 of 040 7.3 Packing and gaskets The chemical industry has carried out cadastral surveys for many years. These surveys provide valuable information regarding environmental pollution
Fisher GX Control Valves
Fisher GX Control Valves Fisher GX Control Valves Innovation. Technology. Reliability. Emerson engineers started with a clean slate in developing Fisher GX control valves. Their goal was to bring unmatched
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
ABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
KF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 31 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications. Company Overview
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications Company Overview Delivering promises. Since our foundation in 1980, PCE has grown to become an international
Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division
Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12
Fisher 657 and 667 Diaphragm Actuators
657 and Actuators Product Bulletin Fisher 657 and Diaphragm Actuators Fisher 657 and spring-opposed diaphragm actuators position the valve plug in the valve in response to varying controller or valve positioner
BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
The Unique Accelabar Flow Meter
The Unique Accelabar Flow Meter The Accelabar is a new and unique flow meter that combines two differential pressure technologies to produce operating ranges never before attainable in a single flow meter.
Electromagnetic Flow Meter
Electromagnetic Flow Meter Description The EL 2200 series of electromagnetic sensors represent the state of the art for the accurate measurement for water cycle and process applications. Flow meters are
Pressure and Temperature Controls
Pressure and Controls Pressure Reducing Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air and liquid systems safely and efficiently. And assure uninterrupted
AURORA. 1030 AND 1040 Series SUCTION DIFFUSERS, COMBINATION AND TRIPLE DUTY VALVES WWW.AURORAPUMP.COM
UROR 1030 ND 1040 Series SUCTION DIFFUSERS, COMINTION ND TRIPLE DUTY VLVES WWW.URORPUMP.COM UROR 1030 ND 1040 Series Suction Diffusers, Combination and Triple Duty Valves Designed for Direct Mounting on
Vogt Valves The Connection Bulletin for Forged Steel Flow Control Valves CB 15
The Connection Bulletin for Forged Steel Flow Control Valves CB 15 Flow Control Division Forged Steel Flow Control Valves GRADUATED DIAL AND INDICATOR FULLY GUIDED V-PORT THROTTLING DISC AND INTEGRAL HARD
Model 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve
High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
TYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
Pipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve.
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve. Features Eliminates high cost of installation and maintenance of complex conventional flow control
REGULATORS 175/153 Series
175/153 Series 175 HEATING 153 COOLING Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2002 Watson McDaniel Company Revised 7/2002 175 / 153 Screwed
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
VG7000 Series Bronze Control Valves
VG7000 Series Bronze Control Valves Product Bulletin VG7000 Series Code No. LIT-977140 Issued November 15, 2013 Supersedes March 29, 2013 VG7000 Series Bronze Control Valves are designed primarily to regulate
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
TA-FUS1ON. Fully adjustable Kvs control and balancing valves. That s just two good.
TA-FUS1ON Fully adjustable Kvs control and balancing valves. That s just two good. Supported by the Reece hvac-r network. Through our 36 stores around Australia, Reece hvac-r is committed to supporting
Electro-Magnetic Flowmeters COPA-XT 2-Wire DT43
Data Sheet Electro-Magnetic Flowmeters COPA-XT 2-Wire DT43 2-Wire Operation Significantly reduces installation costs when compared to a traditional 4-wire magmeter. ±0.5% of rate system accuracy. Patented
Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
Series PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference
Wafer, Semi-Lug, Lug and Double Flanged Type
Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off
Diaphragm Control Valves FLUXOTROL Series I and Series 25 Installation and Maintenance Instructions
Diaphragm Control Valves FLUXOTROL Series I and Series 25 Installation and Maintenance Instructions 1. General 2. Installation instructions 3. Maintenance instructions 4. Spare parts list IMPORTANT SAFETY
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
Baumann 24000SB Barstock Control Valve
Instruction Manual 24000SB Valve Baumann 24000SB Barstock Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 3 Installation... 3 Air Piping... 4 Disassembly...
The Axial Flow Valve. Class 300/600. sales@elster-instromet.co.uk www.elster-instromet.com SERIES
The Axial Flow Valve SERIES Class 300/600 sales@elster-instromet.co.uk www.elster-instromet.com THE AXIAL FLOW VALVE - SERIES 300/600 A UNIQUE REGULATOR What is the Axial Flow Valve? The Axial Flow Valve
needle valves Needle Valves Index At a Glance 1
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves Features Top guided design offers high capacity with 0.110 in 2 [0.710 cm 2 ] orifice area.
Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow
Fisher D3 Control Valve
D3 Valve Product Bulletin Fisher D3 Control Valve The Fisher D3 control valve is a compact, rugged valve designed for on/off or throttling control, and utilizes FloPro technology, using either pneumatic
Product Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description
Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR
2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications
Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?
2- and 3-port valves with flanged connections, PN 10
4 402 VVF32.. VXF32.. ACVATIX 2 and 3port valves with flanged connections, PN 10 From the largestroke valve line VVF32.. VXF32.. Performance valves for medium temperatures from 10 150 C Valve body of grey
VAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
100DHP TM CCI DRAG Control Valve For High Pressure Turbine Bypass
100DHP TM CCI DRAG Control Valve For High Pressure Turbine Bypass 2 What is a HP Turbine Bypass Valve? It routes high pressure, high temperature steam around the HP Turbine, from the main steam line typically
Diaphragm Actuators Favorable Variety Pneumatic Diaphragm Actuators Electric Actuators Hydraulic Actuators
Favorable Variety Whether rotary or linear with pneumatic, electric, and hydraulic valve actuators from ARCA Regler GmbH, you always have the right solution at hand. ARCA s comprehensive product portfolio
The First Choice in Secondary Valves. GREENWOOD VALVES
The First Choice in Secondary Valves. GREENWOOD VALVES QUALITY SERVICE Over sixty-five years of continuous service to the oil, gas and energy industry testifies to Greenwood Valves distinguished tradition
Pressure & Flame Protection
Pressure & Flame Protection Safety Relief Valves Safety Relief Valves WB SERIES SPRING LOADED SAFETY RELIEF VALVES The WB is designed safely relieve excess pressure in pumps, pipework, tanks, calorifiers,