ALLNET ALL7950 SIP PHONE INSTALLATION GUIDE

Transcription

1 pag.1 ALLNET ALL7950 SIP PHONE INSTALLATION GUIDE

2 pag.2 SUMMARY SKYPHO VOIP SERVICE...3 ALL7950 PACKAGE CONTENT...3 DEVICE PHYSICAL CONNECTION...4 ACCESS TO THE DEVICE...7 Access to IP Phone when the DHCP service is working...7 Access to IP Phone when the DHCP service is not working...8 WEB BROWSER CONFIGURATION...10 LAN Parameters...10 VoIP Parameters...11 CONFIGURATION PARAMETERS FOR ALL7950 ALLNET IP PHONE DEVICE...13

3 pag.3 SKYPHO VOIP SERVICE The use of SKYPHO VoIP (Voice Over IP) service is simple and quick. You need only an Internet access, the ALL7950 IP Phone and with few clicks you could use the new telephone line with the quality equal to the traditional landline. To use the SKYPHO s VOIP service, you need: - One computer with an Ethernet port; - One modem/router with a LAN port; - One Internet access; - One Username and one Password (account SIP). The SIP account is the registration made on SKYPHO s server that allows to the user to access the VoIP services provided by the server itself. It is composed by a Username, coincident with the telephone number you have been assigned and a Password (confidential access code) by which you can access the Skypho telephone services. LOOK OUT! The confidentiality of this data is necessary in order to guarantee that the service will be accessed only by you. For your major safety, you can choose a new password by accessing on Skypho s registration site. ALL7950 PACKAGE CONTENT One ALL7950 IP Phone One Ethernet cable (1,8 meters) One power adapter ALL7950 IP Phone Ethernet Cable Power adapter

4 pag.4 DEVICE PHYSICAL CONNECTION First of all, you have to make the physical connection of the device, following the simple instructions hereafter included Insert the Ethernet cable in the PC port of the ALL7950 device Connect the other end to the Ethernet port of your personal computer Connect the power adapter to the wall socket Insert the Ethernet cable in the ALL7950 LAN port Connect the other end of the cable to your LAN (Hub/Modem/Router) Internet Here below you can find the layout for the physical connection of the device.

5 pag.5

6 pag.6

7 ACCESS TO THE DEVICE pag.7 Once the connection is completed, you can proceed with the ALLNET ALL7950 configuration. Verify that on your router the DHCP service is either in Enable status (DHCP allows the network administrator to distribute IP addresses when a computer is plugged into a different place in the network) or in Disable status (this means that in your LAN the IP addresses are used in a static way). Then, follow the suitable configuration instructions. Access to IP Phone when the DHCP service is working 1. verify that the LAN port of your PC is configured in order to obtain an IP address automatically. Click on Start \ Settings\ Network connections, double click on Local area connections (LAN). In the new window, click on Properties and then double click on Internet Protocol (TCP/IP). Verify that the option Obtain an IP address automatically is activated or modify the setting and press OK. At the end, you can close all the opened windows. 2. assign the IP address to your ALLNET ALL7950 phone by pressing the MENU keyboard key. On the display you will see Name:, insert the telephone number assigned by Skypho during registration. Press the key, you will see ADLS connection:, press the key to set it on Disable, if it is already in Disable go to next step. Press the key, you will see DHCP, press the key to set it on Enable. Your ALL7950 will make a settings update and it will show again DHCP: in Enable status. The telephone configuration is finished, press Menu to exit. Access your router configuration and verify between LAN or DHCP Client which IP address has been assigned to your ALLNET ALL7950 and write it down (in the example: the address is ). 3. open the web browser (ie. Internet Explore) and type in the IP address of your ALLNET ALL and press GO. (in the example: the address is ).

8 4. Leave Username and Password blank as you are installing the phone for the first time and press OK. pag.8 Look out!! The confidentiality of this data is necessary in order to guarantee that the equipment configuration is accessible only by you. We suggest to proceed with the configuration password change and to write it down by using the Web Login Configuration. 5. After few seconds, it will appear the ALLNET IP Phone Configuration page where you can modify the configuration parameters, as indicated in the following pages. LOOK OUT!: the changes made are not going to be effective before Save and Reboot of the device, as pointed out in the following pages. Access to IP Phone when the DHCP service is not working 1. configure the static IP address (ie ) on your LAN port. Click on Start \ Settings\ Network connections, double click on Local area connections (LAN). In the new window click on Properties and then double click on Internet Protocol (TCP/IP). Verify that the option Use the following IP address is activated, or modify the setting and fill in the following fields: IP address: x with x different from 1 and 5 (this is the IP that will be assigned to your Voip telephone) Subnet Mask: Default Gateway: For DNS servers, it should be used the IP addresses provided by the Internet Service Provider. Once finished the configuration, press OK and close all the opened windows.

9 2. configure the static IP address on your IP Phone. On the display you will see Name:, insert the telephone number assigned by Skypho during registration. Press the key, you will see ADLS connection:, press the key to set it on Disable, if it is already in OFF go to next step. Press the key, you will see DHCP, press the key to set it on Disable. Press the key, you will see IP address, enter the chosen IP address (ie ). Press the key, you will see Subnet Mask:, enter the network connection data ( (ie ). Press the key, you will see Voip Router:, enter the default gateway you have found in the network connection (ie ). Press the key, you will see DNS server IP, enter the IP addresses provided by the Internet Service Provider. Press the key, you will see SNTP Server IP:, enter the IP , press MENU, then /OK. Your SIP All7950 telephone is ready to make and receive Voip calls! 3. to complete the setting, open your Web Browser (ie. Internet Explorer), enter the IP address x:9999 (in the example: ) and press GO. pag.9 4. Leave Username and Password blank as you are installing the phone for the first time and press OK. Look out!! The confidentiality of this data is necessary in order to guarantee that the equipment configuration is accessible only by you. We suggest to proceed with the configuration password change and to write it down by using the Web Login Configuration. 6. After few seconds, it will appear the ALLNET IP Phone Configuration page where you can modify the configuration parameters, as indicated in the following pages. LOOK OUT!: the changes made are not going to be effective before Save and Reboot of the device, as pointed out in the following pages.

10 WEB BROWSER CONFIGURATION pag.10 Before proceeding with the configuration of your ALLNET ALL7950 via WEB Browser, it is important that you have at your disposal the username and password for the VoIP service that you obtained during registration in Skypho. Access the Basic settings and create the Username and the Password for accessing to the Voip telephone management. If you want to maintain the default settings leave the Username and Password fields blank. Insert the value in the field Timeservier IP, then select your Time Zone and enable the TFTP Server and the FTP Client by choosing Enable. Insert the value 1234 in the Remote Configuration Password field. LAN Parameters 1. Verify that in the Network settings, the DHCP option has been selected and then press Save : Note: If in your LAN are used static IP addresses, it is necessary to select the option Static IP and insert the values of IP, Mask, Gateway, etc... to avoid conflicts on the network.

11 pag.11 VoIP Parameters 2. Insert your SIP account, that you obtained during registration in Skypho, in the SIP Phone Settings Mask. NOTE: The SIP account is the subscription registered on Skypho s server that allows to the user to access the VoIP services provided by the server itself. It is composed by a User name, coincident with the telephone number you have been assigned and a Password (confidential access code) by which you can access the telephone services of Skypho. User name and Password will be provided directly by Skypho at the activation of the service. SIP Server = voip.eutelia.it SIP Username = Telephone Number Assigned by SKYPHO Authentication Name = Telephone Number Assigned by SKYPHO Authentication Password = SIP Account Password For other settings please follow what indicated in the picture then click on Save

12 pag Make the SIP settings as shown in the picture: SIP phone port number: 5060 SIP Server Domain Name/IP Address: voip.eutelia.it Server Port nr.: 5060 Authentication Expire Time: 3600 Outbound Proxy Port nr.: 5060 Session Timer: 1800 Media Port: Prack: on Session refresher: None Session timer method: Invite UDP/TCP: UDP At the end click on Save 4. In the STUN Server & UpnP Settings mask, select ON in the Stun field and enter stun.voip.eutelia.it in the field STUN server: Port number. Leave Disabile in the UpnP field and press Save.

13 pag.13 CONFIGURATION PARAMETERS FOR ALL7950 ALLNET IP PHONE DEVICE Device access credentials IP Address: to be verified on ADSL modem Password: blank LAN PARAMETERS LAN Configuration IP Address: DHCP : DHCP on IP statico : (DHCP off) VOIP PARAMETERS VoIP Protocol: SIP SIP Server = voip.eutelia.it SIP Username = Telephone Number Assigned by SKYPHO Nome autenticazione = Telephone Number Assigned by SKYPHO Password autenticazione = SIP Account Password assigned by SKYPHO VoIP SIP Local Port: 5060 SIP Server: voip.eutelia.it VoIP STUN STUN Server Address: stun.voip.eutelia.it NTP PARAMETERS NTP Configuration NTP Server: Time Zone: +1