SOLE AGENTS AND DISTRIBUTORS OF MODWELD WELDING EQUIPMENT PRODUCT RANGE 2012

Size: px
Start display at page:

Download "SOLE AGENTS AND DISTRIBUTORS OF MODWELD WELDING EQUIPMENT PRODUCT RANGE 2012"

Transcription

1 SOLE AGENTS AND DISTRIBUTORS OF MODWELD WELDING EQUIPMENT PRODUCT RANGE 2012 HARARE BULAWAYO 36 Kaguvi Street, Harare. Zimbabwe 7 Brookless Avenue, Khumalo, Bulawayo. Zimbabwe Tel: +263(4)756063T Tel: +263(9)

2 CROSS-REFERENCE TABLE 140i 160i 200i 220V 200i 3 phase 300i cc 400i cc 300i cc/cv 400i cc/cv 500i cc/cv 600i cc/cv 1200i cc/cv 200i Supatig 300i Supatig 400i Supatig 500i Supatig 200i AC/DC 300i AC/DC 200i Compact 300i Compact 250i Supamig 300i Supamig 400i Supamig 450W Wire Feeder 450W Enclosed Wire Feeder 1

3 Modweld 140i mm A 54V 220V 18A 140 x 205 x 320mm 7.7kg Shoulder Strap The Modweld 140i is the only machine in the range that uses basic scratch start for TIG ignition. This machine is aimed at the DIY market and is capable of welding with general purpose 6013 electrodes. 3

4 Modweld 160i 2 4mm A 54V 220V 20A 180 x 230 x 390mm 11.6kg The Modweld 160i is aimed at the maintenance market and is also often used to perform light TIG welding such as welding stainless steel staircases Modweld 200i 220V 2 5mm A 54V 220V 25A 185 x 250 x 480mm 14.5kg The Modweld 200i is used for heavy electrode welding off a single phase supply, the supply needs to be capable of delivering the higher current required. 4

5 Modweld 200i 3phase 2 5mm A 380V / 525V 15A / 11A 210 x 330 x 500mm 25kg Used in similar applications to the Modweld 200i 220V, heavy electrode work combined with a portable machine Modweld 300i cc A Duty Cycle 80% 25A / 18A 255 x 340 x 520mm 27kg The Modweld 300i cc is capable of performing electrode welding of large size electrodes as well as being able to be run of a generator providing true portable power. Increased duty cycle compared to rest of range. 5

6 Modweld 400i cc A 80V 35A / 25A 255 x 340 x 520mm 28.5kg Due to the higher OCV of the Modweld 400i cc this machine is capable of welding most exotic electrodes such as iron powder and low hydrogen. It also is capable of gouging with both carbon air and gouging electrodes. 6

7 Modweld 300i cc/cv Up to 1.2mm A 25A / 18A 300 x 420 x 500mm 35kg 400i Undercarriage Wire Feeder Wire Feeder Pan Base Front Panel Guard The Modweld 300i cc/cv is the most common multiprocess machine sold. It has the ability to weld for long periods using 1.2mm MIG wire and can weld most electrodes. 7

8 Modweld 400i cc/cv Up to 1.6mm A Used typically in 1.2mm Spray mode welding and other medium production welding. 35A / 25A 300 x 560 x 500mm 47kg 400i Undercarriage Wire Feeder Wire Feeder Pan Base Front Panel Guard Modweld 500i cc/cv All Sizes A The Modweld 500i cc/cv is used for heavy duty production work typically in construction equipment refurbishment. 39A / 28A 400 x 760 x 500mm 70kg 500i Undercarriage Wire Feeder Wire Feeder Pan Base 8

9 Modweld 600i cc/cv All Sizes A 85V Duty Cycle 100% 56A / 41A 400 x 760 x 500mm 70kg 500i Undercarriage Wire Feeder The Modweld 600i cc/cv possesses Wire Feeder Pan Base both a higher OCV than the rest of the range as well being 100% duty cycle rated. This makes this machine ideal for heavy gouging work as well as light subarc. Modweld 1200i cc/cv All Sizes A Duty Cycle 100% 380V 120A 605 x 1020 x 645mm 170kg Wire Feeder Although capable of gouging the Modweld 1200i cc/cv is specifically designed for the submerged application. 9

10 Modweld 200i Supatig 2 5mm A 54V 220V 25A 200 x 400 x 500mm 22.5kg The Modweld 200i Supatig is used primarily in the production of stainless vessels and other parts for the automotive industry. As a Supatig it includes all the gas and current controls required for standard TIG welding. Modweld 300i Supatig A 25A / 18A 300 x 420 x 500mm 36kg 400i Undercarriage The Modweld 300i Supatig is used in heavy duty TIG welding applications. 10

11 Modweld 400i Supatig A 35A / 25A 300 x 560 x 500mm 49kg 400i Undercarriage The Modweld 400i Supatig is used primarily in automated processes. Modweld 500i Supatig A 39A / 28A 400 x 760 x 500mm 72kg 500i Undercarriage Similar to the Modweld 400i Supatig, the 500i Supatig is used primarily in automated processes. 11

12 Modweld 200i AC/DC 2 5mm A AC ; A DC 220V 25A 300 x 560 x 500mm 43kg 400i Undercarriage The Modweld 200i AC/DC provides both DC output for TIG welding steels and titanium as well as an AC output for TIG welding aluminium. The single phase input makes this ideal for all round use and the current is high enough to TIG weld most materials. Modweld 300i AC/DC A both AC & DC 65V 380V 25A 400 x 760 x 500mm 77kg 500i Undercarriage The Modweld 300i AC/DC finds use commonly with the welding of aluminium cylinder heads. Gives full current rating in both the AC and DC modes. 12

13 Modweld 200i Compact 2 5mm Up to 1.0mm A 54V 220V 25A 600 x 660 x 890mm 60kg The Modweld 200i Compact is a machine ideal for a light sheetmetal workshop. With a built-in wire feeder this machine provides the complete multiprocess solution for light fabrication. Modweld 300i Compact Up to 1.2mm A 25A / 18A 600 x 660 x 890mm 60kg The Modweld 300i Compact is used as with the Modweld 200i Compact in light fabrication. This machine would be used more often were the application requires use of 1.2mm wire or 3 phase power. 13

14 Modweld 250i Supamig Up to 1.0mm A 54V 220V 32A 300 x 600 x 800mm 42kg The Modweld 250i Supamig is a MIG only machine aimed at light fabrication where only single phase power is available. Modweld 300i Supamig Up to 1.2mm A Duty Cycle 80% 380V 21A 300 x 600 x 800mm 46kg The Modweld 300i Supamig is a MIG only machine aimed at light fabrication with 1.2mm wire where dip transfer is the main welding mode. 14

15 Modweld 400i Supamig Up to 1.6mm A 380V 33A 300 x 600 x 800mm 46kg The Modweld 400i Supamig is a MIG only machine aimed at production welding of 1.2mm in the spray mode and 1.6mm wire in the dip transfer. 15

16 Modweld 450W Wire Feeder 24V 3.6A 265 x 400 x 600mm 18.5kg The Modweld 450W provides a stable feed due to the quality control circuitry. Modweld 450W Enclosed Wire Feeder 24V 3.6A 265 x 410 x 650mm 18.5kg The Modweld 450W enclosed wire feeder affords extra protection to the spool of wire with regards to dust and metal shavings build up on the spool. Thereby providing longer life for the torch liner. 16

17 Modweld 100i Plasma Maximum Cutting Thickness 25mm A 270V Required Air Flow 35A / 26A 400 x 760 x 500mm 72kg 500i Undercarriage 210l/min at 5.5bar The Modweld 100i Plasma technology extends torch consumable lifetime. This plasma provides a very smooth cut. Modweld 180i Plasma Maximum Cutting Thickness 60mm A 270V Duty Cycle 100% Included Accessories Required Air Flow 380V or 525V 60A / 43A 605 x 1020 x 645mm 177kg 380V Watercooler PW180 Watercooled Torch Pressure Regulator Earth Clamp 38l/min at 4.5bar The Modweld 180i Plasma is designed for continuous cutting of large gauge sheet and piping. Available in both hand-held and machine torch options. Ideal for use on large profiler machines. 17

AIR LIQUIDE WELDING TM Welding Equipment

AIR LIQUIDE WELDING TM Welding Equipment AIR LIQUIDE WELDING TM Welding Equipment AIR LIQUIDE WELDING equipment was designed and manufactured to withstand the rugged welding environment found in the maintenance, construction and automotive industries.

More information

Welding Equipment. Welding Equipment Catalog

Welding Equipment. Welding Equipment Catalog Weldg Equipment Weldg Equipment Catalog WELDING SOLUTIONS 2014 Weldg Equipment ACC ACCESSORIES Table of contents Conectable to Generators with imum of 1.5 times the absorbed power of weldg mache. 4 St

More information

SMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9

SMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9 CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY

More information

Square Wave TIG 200 TIG WELDING MACHINE

Square Wave TIG 200 TIG WELDING MACHINE Square Wave TIG 200 TIG WELDING MACHINE Simplicity Without Compromise The Square Wave TIG 200 is a portable TIG and stick welding machine that lets hobbyists, makers, small fabricators and craftsmen explore

More information

The TransCut 300 plasma cutting system - Plasmacutting with liquid working medium

The TransCut 300 plasma cutting system - Plasmacutting with liquid working medium The TransCut 300 plasma cutting system - Plasmacutting with liquid working medium Speaker Sector Company Street Town Excellent portability with the TransCut 300 plasma cutting system Compact, portable

More information

APPLICATIONS. Semiautomatic Automation Hard Automation Heavy Equipment Transportation Fabrication FEATURES, CONT D. UNIT REQUIRES

APPLICATIONS. Semiautomatic Automation Hard Automation Heavy Equipment Transportation Fabrication FEATURES, CONT D. UNIT REQUIRES ADVANCED PROCESS WELDERS Power Wave Processes Stick, TIG, MIG, Pulsed MIG, Flux-Cored, Tandem MIG, Carbon Arc Gouging Product Number K3279-1 Power Wave S700 S700 Input Power 380-415/440-460/500/575/3/50/60

More information

INDIAN STANDARDS (BIS) ON WELDING

INDIAN STANDARDS (BIS) ON WELDING ** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding

More information

Welding & Cutting Solutions. 2016 Equipment Catalog

Welding & Cutting Solutions. 2016 Equipment Catalog Welding & Cutting Solutions 2016 Equipment Catalog TABLE OF CONTENTS Icons and Warranty Information... 2 Stick Welders... 3-10 TIG Welders... 11-20 MIG: Wire Feeder/Welders... 21-30 MIG & FCAW: Industrial

More information

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

Chapter 5 - Aircraft Welding

Chapter 5 - Aircraft Welding Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced

More information

Typical TIG-plasma solutions

Typical TIG-plasma solutions Typical -plasma solutions 2228-005 2003-670 Boilers maker solutions 2004-257 1210-064 1210-067 64 3638-008 2008-400 1415-014 2000-169 2003-204 1467-003 2000-343 2000-160 Pipework solutions or plasma welded

More information

A Beginner s Guide to TIG Welding

A Beginner s Guide to TIG Welding A Beginner s Guide to TIG Welding TIG Welding Names TIG Welding, or TIG, is an acronym for Tungsten Inert Gas welding. TIG is a commonly used and accepted slag term. The proper terminology is Gas Tungsten

More information

WORD DEFINITION WORD (NATIONAL LANGUAGE)

WORD DEFINITION WORD (NATIONAL LANGUAGE) WELDING GLOSSARY The Glossary has been created as part of the Migration for Development in the Western Balkans (MIDWEB) project, which received financial assistance from the European Commission IPA 2009

More information

TBi Industries 4 1. 0. RoboMIG TBi Robot welding torches 1 YEAR ON TCP. Air and water cooled. Also for robots with integrated cable assemblies

TBi Industries 4 1. 0. RoboMIG TBi Robot welding torches 1 YEAR ON TCP. Air and water cooled. Also for robots with integrated cable assemblies TBi Industries RoboMIG TBi Robot welding torches Air and water cooled Also for robots with integrated cable assemblies Stable design for reliable 1 YEAR ON TCP IEC 60974-7 4 1. 0 Engineering the details

More information

Kemppi Mastertig MLS 2500 and 3500. Welding Versatility for Professionals

Kemppi Mastertig MLS 2500 and 3500. Welding Versatility for Professionals Kemppi Mastertig MLS 2500 and 3500 Welding Versatility for Professionals Kemppi Mastertig MLS 2500 and 3500 Welding Versatility for Professionals The Mastertig MLS 2500 and 3500 offer outstanding TIG performance

More information

2350-011. Chapter 2 TIG welding

2350-011. Chapter 2 TIG welding 350-011 Chapter TIG welding TIG welding TIG welding overview and selection guide Scheme of a manual installation for TIG welding Helmet/mask Protective clothing Filler metal rod Earth clamp Fume extraction

More information

Impact Testing Systems

Impact Testing Systems The more intelligent solution... Impact Testing Systems The more intelligent solution... Tronjestraße 8, 44219 Dortmund Tel.: +49 231 912980 0 Fax.: +49 231 179855 www.coesfeld.com mail@coesfeld.com Introduction

More information

EXTRA POWER, EXTRA PERFORMANCE

EXTRA POWER, EXTRA PERFORMANCE EXTRA POWER, EXTRA PERFORMANCE Ranger 250 GXT Shown: Ranger 250 GXT, K2382-4 KEY FEATURES The Ranger 250 GXT has all the extras you need for construction and maintenance work. Versatile AC/DC welding output

More information

TECHNICAL SPECIFICATION FOR PROJECTION WELDING MACHINE (Qty. 2 Nos.)

TECHNICAL SPECIFICATION FOR PROJECTION WELDING MACHINE (Qty. 2 Nos.) TECHNICAL SPECIFICATION FOR PROJECTION WELDING MACHINE (Qty. 2 Nos.) 1. Requirement: Two (02) Nos. DC Type, 3 phase, 3 wire Projection Welding Machine is required for welding of ventilation M.S. / Stainless

More information

PAK. PakMaster XL PLUS-CE Series. PLUS The New SureLok Torch! Air Plasma Cutting Systems. Over 40 Years of Plasma Cutting Innovation

PAK. PakMaster XL PLUS-CE Series. PLUS The New SureLok Torch! Air Plasma Cutting Systems. Over 40 Years of Plasma Cutting Innovation MASTERXL PLUS- Air Plasma Cutting Systems 3 Year Warranty PakMaster 50XL PLUS-CE GENUINE CUT 12.7mm ( 1 2 ) SEVERANCE CUT 19.1mm ( 3 4 ) PakMaster 75XL PLUS-CE GENUINE CUT 19.1mm ( 3 4 ) SEVERANCE CUT

More information

TBi Industries. MIG / MAG Welding torches TBi Expert 0. 1

TBi Industries. MIG / MAG Welding torches TBi Expert 0. 1 TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240

More information

YEAR/MODEL ANNÉE/MODÈLE BODY SHOP WELDING EQUIPMENT

YEAR/MODEL ANNÉE/MODÈLE BODY SHOP WELDING EQUIPMENT YEAR/MODEL ANNÉE/MODÈLE DATE OF ISSUE DATE EN VIGUEUR BULLETIN NUMBER NUMÉRO DU BULLETIN Body Repair News ALL APRIL 15, 2014 BRN-14-1 BODY SHOP WELDING EQUIPMENT DISCLAIMER: This publication provides details

More information

TIG INVERTER INSTRUCTION MANUAL

TIG INVERTER INSTRUCTION MANUAL TIG INVERTER INSTRUCTION MANUAL Contents Warning General Description Block Diagram Main Parameters Circuit Diagram Installation and Operation Caution Maintenance Spare Parts List Troubleshooting 3 4 4

More information

A Beginner s Guide to MIG Welding

A Beginner s Guide to MIG Welding A Beginner s Guide to MIG Welding MIG Welding Names MIG welding, or MIG, is an acronym for Metal Inert Gas welding. MIG is a commonly used and accepted slang term that was appropriate when the process

More information

UNI FLAME AUTOLIFT MIG/MMA/TIG. 165/190/220/250 Inverter Manual. 240 Volt. Standard MIG / MAG

UNI FLAME AUTOLIFT MIG/MMA/TIG. 165/190/220/250 Inverter Manual. 240 Volt. Standard MIG / MAG UNI FLAME AUTOLIFT MIG/MMA/TIG 165/190/220/250 Inverter Manual 240 Volt Standard MIG / MAG UNI FLAME AUTOLIFT 2YEARS Warranty * Machine Model Description Part Number MIG/MM/TIG Inverter KUMJR165 / 190

More information

Welding & Fabrication Industry Certification Programs

Welding & Fabrication Industry Certification Programs FALL 2013 Welding & Fabrication Industry Certification Programs Co-Sponsored by: Rochester Arc + Flame Center 125 Fedex Way, Rochester, NY 14624 www.rocafc.com Welding Industry Opportunities Welders are

More information

Copper. Consumables. Copper and Copper Alloys. Welding Processes

Copper. Consumables. Copper and Copper Alloys. Welding Processes Consumables and Alloys is a metal with some very important properties, the main ones being its high electrical conductivity, its high thermal conductivity, its excellent resistance to corrosion, and its

More information

GROWTH COMPETENCE COMMUNICATION

GROWTH COMPETENCE COMMUNICATION GB COMPANY OVERVIEW GROWTH Vision & Values COMPETENCE COMMUNICATION 2 FAST FACTS ORGANIZATION OPERATIONS HIST TORY Wld Weld to Believe Bli COMPETENCES PRODUCTS MARKET VISION 3 SELCO GROUP Private share

More information

Master catalogue arc equipment

Master catalogue arc equipment Master catalogue arc equipment MMA - TIG - MIG/MAG - Plasma cutting Master catalogue arc equipments 2008 / 2009 www.oerlikon-welding.com 2006-93 2008-204 2008-205 2008-206 OERLIKON is part of the Air Liquide

More information

VarioSynergic 3400 / 4000 / 5000 VarioSynergic 3400-2 / 4000-2 / 5000-2. MIG/MAG welding

VarioSynergic 3400 / 4000 / 5000 VarioSynergic 3400-2 / 4000-2 / 5000-2. MIG/MAG welding VarioSynergic 3400 / 4000 / 5000 VarioSynergic 3400-2 / 4000-2 / 5000-2 MIG/MAG welding A high-calibre machine that s user-friendly, too. GENERAL REMARKS UTILISATION It s got the lot The VarioSynergic

More information

2350-012. Chapter 3 MIG/MAG welding

2350-012. Chapter 3 MIG/MAG welding 250-012 Chapter MIG/MAG welding 2000-489 MIG/MAG welding The transfer of metal Torch Nozzle Contact tip Gaseous protection Molten metal Electrode wire Weld bead MIG/MAG welding overview and selection guide

More information

BRIEF PROJECT PROFILE ON WELDING ELECTRODE MANUFACTURING. Turn key project suppliers EUREKA SYSTEMS AND ELECTRODES PVT.LTD.

BRIEF PROJECT PROFILE ON WELDING ELECTRODE MANUFACTURING. Turn key project suppliers EUREKA SYSTEMS AND ELECTRODES PVT.LTD. BRIEF PROJECT PROFILE ON ELECTRODE MANUFACTURING Turn key project suppliers EUREKA SYSTEMS AND ELECTRODES PVT.LTD. M A C H I N E R Y D I V I S I O N 11/15A, SELVARAJAPURAM, CHINTHAMANI PUDUR COIMBATORE

More information

PipeWorx Welding System

PipeWorx Welding System PipeWorx Welding System Issued August 014 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes

More information

STT -10 WIRE FEEDER. For Surface Tension Transfer TM. Process

STT -10 WIRE FEEDER. For Surface Tension Transfer TM. Process STT -10 WIRE FEEDER For Surface Tension Transfer TM Process STT -10 WIRE FEEDER ADVANTAGE LINCOLN The STT-10 does a lot more than just feed wire. This new generation microprocessor controlled wire feeder

More information

V3.2-12-2013 PREFAB WELDING PREFAB WELDING

V3.2-12-2013 PREFAB WELDING PREFAB WELDING SP121 ø12 - ø121 mm ø0,45 to ø4,5 '' Technical Specifications - Basic stainless steel jaws Ø 1 to 4,5 ( Ø 24 to Ø 121 mm ) - Additional stainless steel jaws Ø 0,45 to 4,25 (Ø12 to Ø108mm) - Electric rotation

More information

EML 2322L MAE Design and Manufacturing Laboratory. Welding

EML 2322L MAE Design and Manufacturing Laboratory. Welding EML 2322L MAE Design and Manufacturing Laboratory Welding Intro to Welding A weld is made when separate pieces of material to be joined combine and form one piece when heated to a temperature high enough

More information

Electric Rotary Actuator - On/Off or programmable control actuator

Electric Rotary Actuator - On/Off or programmable control actuator Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type

More information

GK Packing System Welding Instructions

GK Packing System Welding Instructions GK Packing System Welding Instructions Roxtec GmbH Neuer Höltigbaum 1-3, 22143 Hamburg GERMANY Tel +49 (040) 657398-0, Fax +49 (040) 657398-50 EMAIL info@de.roxtec.com, www.roxtec.de Welding instructions

More information

TIG torches... 3-2 to 3-5 Tungsten electrodes... 3-6 to 3-7 TIG consumables... 3-8 Miscellaneous... 3-9

TIG torches... 3-2 to 3-5 Tungsten electrodes... 3-6 to 3-7 TIG consumables... 3-8 Miscellaneous... 3-9 3- welding torches........................................................... 3-2 to 3-5 Tungsten electrodes........................................ 3-6 to 3-7 consumables........................................................

More information

5-Other arc welding WELDING TOOLS AND ACCESSORIES

5-Other arc welding WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES -Other arc welding ARC WELDING OTHER Cables and connectors... 80 to 81 Clamps... 82 to 83 Magnetic ground clamps... 84 to 8 Hammers / brushes... 86 Miscellaneous... 87 Accessories...

More information

Overview on Welding and Ergonomics

Overview on Welding and Ergonomics Jannuary, 30-2014 Overview on Welding and Ergonomics Luca Costa srl, Italy luca.costa@iisprogress.it Approaching ergonomics in welding fabrication Welding fabrication involves several operations which

More information

UNITOR VACUUM cleaners

UNITOR VACUUM cleaners UNITOR VACUUM cleaners Unitor VCD15 a compact, heavy-duty dry vacuum cleaner for accommodation areas The smallest unit in the Unitor range, the VCD15 is purpose-made for use on cruise and passenger vessels.

More information

CSP #34-013 - Welding Equipment, Supplies, Consumables & Bottled Gas

CSP #34-013 - Welding Equipment, Supplies, Consumables & Bottled Gas CSP #34-013 - Welding Equipment, Supplies, Consumables & Bottled Gas Janet Bradley, Buyer Commodity #225 Bid Reference: 34-013 Expires July 2017 Prices firm thru July 2015, automatically renewing unless

More information

DOUBLE GATE KNIFE GATE VALVE

DOUBLE GATE KNIFE GATE VALVE DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or

More information

BMW Service Special tools and equipment New spot welding machine Multispot MI-100control BMW/MINI

BMW Service Special tools and equipment New spot welding machine Multispot MI-100control BMW/MINI Geschäftsleitung Management Service/Beratung Service/Reception Werkstatt Workshop Gewährleistung Warranty Teile und Zubehör Parts and Accessories Verkauf Sales Verantwortlich/Responsible: VS-14/Beyser

More information

TANK FABRICATION. Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com

TANK FABRICATION. Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com TANK FABRICATION Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com BUG-O ALL TIME GIRTH WELDER Bug-o Systems offers the Automatic Girth Welder for tank fabrication applications.

More information

Electro-Magnetic Flowmeters COPA-XT 2-Wire DT43

Electro-Magnetic Flowmeters COPA-XT 2-Wire DT43 Data Sheet Electro-Magnetic Flowmeters COPA-XT 2-Wire DT43 2-Wire Operation Significantly reduces installation costs when compared to a traditional 4-wire magmeter. ±0.5% of rate system accuracy. Patented

More information

Plasma / TIG machine range

Plasma / TIG machine range Plasma / TIG machine range The PLASMA/TIG solutions are often used to weld vessels or pipes in various domains as food, transport, petrochemical or aeronautical industries. Air Liquide Welding proposes

More information

AN INTRODUCTION TO TIG WELDING. wws group support@weldability.com

AN INTRODUCTION TO TIG WELDING. wws group support@weldability.com AN INTRODUCTION TO TIG WELDING wws group suppt@weldability.com WARNING: This document contains general infmation about the topic discussed herein. This document is not an application manual and does not

More information

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single

More information

www.klmtechgroup.com TABLE OF CONTENT

www.klmtechgroup.com TABLE OF CONTENT Page : 1 of 45 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT 1.0 SCOPE 2 2.0 CONFLICTS

More information

Aristo robot package STANDARD MIG ROBOTIC WELDING COMPONENTS FOR FIELDBUS COMMUNICATION XA00125020. TrueArcVoltage TM System inside

Aristo robot package STANDARD MIG ROBOTIC WELDING COMPONENTS FOR FIELDBUS COMMUNICATION XA00125020. TrueArcVoltage TM System inside Aristo robot package STANDARD MIG ROBOTIC WELDING COMPONENTS FOR FIELDBUS COMMUNICATION TrueArcVoltage TM System inside XA0000 ESAB has been working with robotic welding for many years. This is why you

More information

ESAB Swift Arc Transfer TM MAG welding at very high travel speed

ESAB Swift Arc Transfer TM MAG welding at very high travel speed ESAB Swift Arc Transfer TM MAG welding at very high travel speed The ultimate high productivity process. STRENGTH THROUGH COOPERATION ESAB Swift Arc Transfer (SAT TM ) ESAB Swift Arc Transfer (SAT TM )

More information

Flash Butt Welding Machines

Flash Butt Welding Machines Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process

More information

security solutions for your home

security solutions for your home security solutions for your home www.prowlerproof.com.au Copyright 2004 Gershwin Pty Ltd ABN 220 641 02816 PRODUCT APPLICATIONS PRODUCT RANGE Prowler Proof manufactures a full range of products to suit

More information

14. Mechanisation. and Welding Fixture

14. Mechanisation. and Welding Fixture 14. Mechanisation and Welding Fixture 14. Mechanisation and Welding Fixtures 197 As the production costs of the metal-working industry are nowadays mainly determined by the costs of labour, many factories

More information

key- precision Tecum cuil Ludere ipsae. Possem Precision level detection When space and price matter Pointek CLS 100

key- precision Tecum cuil Ludere ipsae. Possem Precision level detection When space and price matter Pointek CLS 100 Pointek CLS 100 Compact design and short insertion length. Ideal for constricted spaces and for small vessels or pipes up to 100 mm (4 ). Tecum cuil Ludere ipsae. Possem Precision level detection When

More information

Duplex Stainless Steel Fabrication. Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association

Duplex Stainless Steel Fabrication. Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association Duplex Stainless Steel Fabrication Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association 1 Promoting molybdenum - as a material with superior properties and performance in a

More information

BURNY 8 TAKE CONTROL

BURNY 8 TAKE CONTROL BURNY 8 TAKE CONTROL Upgrade To 8 And Take Control Burny 8 Based on Windows 8 OS In the competitive business of CNC plasma cutting, maximizing output and productivity is imperative. This can only happen

More information

INSTANTANEOUS GAS FIRED

INSTANTANEOUS GAS FIRED INSTANTANEOUS GAS FIRED Celt Star C Britony II T Britony FlexiFlue Hot water on demand Instantaneous gas fired water heaters Instant hot water from the world leader Back in 1925 Chaffoteaux & Maury invented

More information

ESAB MIG/MAG Robot packages Yaskawa Motoman

ESAB MIG/MAG Robot packages Yaskawa Motoman ESAB MIG/MAG Robot packages Yaskawa Motoman MA 1400 & 1900 with Aristo W8 2 Anybus Devicenet Processes used in robotic welding include: MIG/MAG MIG/MAG pulse MIG/MAG SuperPulse Short arc / pulse Pulse

More information

WELDING & CUTTING MAIN EQUIPMENT

WELDING & CUTTING MAIN EQUIPMENT GASES DIVISION GAS WELDING & CUTTING EQUIPMENT WELDING & CUTTING MAIN EQUIPMENT GAS WELDING & CUTTING KIT The MARIGASES GAS WELDING AND CUTTING KIT is a high quality set containing all the tools and components

More information

Colonnade Security Pipe

Colonnade Security Pipe Description: Round & Square downpipe formed from extruded 6060 T4 aluminium in various sizes (Ø83mm, Ø108mm, 83x83 mm & 108x108mm*) & supplied with a complete range of accessories i.e. Offsets, bends,

More information

1300 MAXTRAK SPECIFICATION

1300 MAXTRAK SPECIFICATION CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having

More information

FastMig M A new breed of industrial workhorse

FastMig M A new breed of industrial workhorse FastMig M A new breed of industrial workhorse Proven reliability from the top of the welding technology Top welding performance for industrial MIG/MAG welding. Welding machine with various configurations

More information

Real Time Cost Impact Assessment of Composite and Metallic Design Alternatives. Dr. Christopher Rush Joe Falque Karen McRitchie

Real Time Cost Impact Assessment of Composite and Metallic Design Alternatives. Dr. Christopher Rush Joe Falque Karen McRitchie Real Time Cost Impact Assessment of Composite and Metallic Design Alternatives Dr. Christopher Rush Joe Falque Karen McRitchie Overview Introduction Composite Structures New Challenges Background and Related

More information

1. HANDLING MACHINES PRODUCTION SERIES BZ Single-column portal / manipulators

1. HANDLING MACHINES PRODUCTION SERIES BZ Single-column portal / manipulators 1. HANDLING MACHINES PRODUCTION SERIES BZ Single-column portal / manipulators All devices are made on the basis of a large BZ modular system which has matured and continuously been refined over 40 years.

More information

SECTION 4: Cable Ladder Stainless Steel & Aluminium

SECTION 4: Cable Ladder Stainless Steel & Aluminium SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General

More information

Non- Carbon Fiber Electrical Heating Textile Introduction:

Non- Carbon Fiber Electrical Heating Textile Introduction: Non- Carbon Fiber Electrical Heating Introduction: This Heating is a new generation electrical heating system which is specially designed for mobile heating, energy saving and safety orientated requirements

More information

SVENSKA.......................................................3 DANSK.........................................................10 NORSK................

SVENSKA.......................................................3 DANSK.........................................................10 NORSK................ Caddy 150 & Caddy Tig 150 LHQ 150, LTV 150 SVENSKA.......................................................3 DANSK.........................................................10 NORSK.........................................................17

More information

CMT: Cold Metal Transfer. MIG/MAG dip-transfer arc process

CMT: Cold Metal Transfer. MIG/MAG dip-transfer arc process CMT: Cold Metal Transfer MIG/MAG dip-transfer arc process A hot & cold process makes the impossible possible GENERAL REMARKS Some like it cold There are some materials and applications where having only

More information

www.steelformcatering.com

www.steelformcatering.com www.steelformcatering.com catering cat e r i n g We are specialized in the production and sub furniture of components for mechanical industry, sector for which we even furnish advice and collaborate in

More information

Heavy Duty Solenoid Controlled Access Lock. User Manual - Original Language Version

Heavy Duty Solenoid Controlled Access Lock. User Manual - Original Language Version OLYM-S24D-C24D The Olympus 4HD is a heavy duty solenoid controlled access lock available with either a stainless steel tongue actuator or a heavy duty handle. The Olympus 4HD is capable of supporting Category

More information

EMC Engineering Guidelines For Automation Systems PS 4 PS 416 04/97 AWB 27-1287-GB

EMC Engineering Guidelines For Automation Systems PS 4 PS 416 04/97 AWB 27-1287-GB EMC Engineering Guidelines For Automation Systems PS 4 PS 416 1st edition 04/97 Moeller GmbH, Bonn Author: Werner Albrecht Editors: Klaus Krüger, Thomas Kracht Translator: Chris Baker, Terence Osborn Contents

More information

PURPOSE-BUILT FOR PIPE WELDING. Cross Country 300 Engine-Driven Welder

PURPOSE-BUILT FOR PIPE WELDING. Cross Country 300 Engine-Driven Welder PURPOSE-BUILT FOR PIPE WELDING Cross Country 300 Engine-Driven Welder PURPOSE-BUILT FOR PIPE WELDING Cross Country 300 Engine-Driven Welder When you re in the cross-country pipeline welding business, your

More information

TIG WELDING TIPS by Tom Bell

TIG WELDING TIPS by Tom Bell (This is a two-part document, with general tig welding first followed by one aluminum-specific.) TIG WELDING TIPS by Tom Bell 1. The bigger the rod, the easier it is to feed. Use larger diameter rods (3/32

More information

Mueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source.

Mueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. Mueller Pipe Repair Products Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. SERVICE SADDLES Mueller service saddles, available in bronze,

More information

NAGEL ECO 180 FLEXIBLE HONING SYSTEM

NAGEL ECO 180 FLEXIBLE HONING SYSTEM NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS

More information

LIST OF PRODUCTS UNDER MANDATORY CERTIFICATION. 4 IS 1489 (Part 1) Portland Pozzolana Cement-Part1 Fly-ash based

LIST OF PRODUCTS UNDER MANDATORY CERTIFICATION. 4 IS 1489 (Part 1) Portland Pozzolana Cement-Part1 Fly-ash based LIST OF PRODUCTS UNDER MANDATORY CERTIFICATION No. IS No. Product Cement 1 IS 12269 Ordinary Portland Cement, 53 Grade 2 IS 12330 Sulphate Resisting Portland Cement 3 IS 12600 Low heat Portland Cement

More information

FABRICATION OF STAINLESS STEEL FOR PRESENTED BY C.C.SAMPATH SREEVATSA STAINLESS STEEL FABRICATORS (P) LTD. CHENNAI WORKSHOP

FABRICATION OF STAINLESS STEEL FOR PRESENTED BY C.C.SAMPATH SREEVATSA STAINLESS STEEL FABRICATORS (P) LTD. CHENNAI WORKSHOP FABRICATION OF STAINLESS STEEL FOR ABC - SECTOR PRESENTED BY C.C.SAMPATH SREEVATSA STAINLESS STEEL FABRICATORS (P) LTD. CHENNAI WORKSHOP ON SUSTAINABLE STAINLESS STEEL FOR BUILDING & CONSTRUCTION ON FRIDAY,

More information

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB

More information

Eberl Iron Works, Inc.

Eberl Iron Works, Inc. Eberl Iron Works, Inc. Order Form Manual for Stair Pans, Stair Treads and Bent Plate NEW: VISIT US ONLINE AT WWW.STAIRPANS.COM Eberl Iron Works, Inc. 128 Sycamore St. Buffalo, NY 14204 Ph: 716-854-7633,

More information

Lightweight, compact, ergonomic, safe POLARIS FID. Portable TOC Analyser for Stack Emissions

Lightweight, compact, ergonomic, safe POLARIS FID. Portable TOC Analyser for Stack Emissions Lightweight, compact, ergonomic, safe POLARIS FID Portable TOC Analyser for Stack Emissions The Portable FID for Stack Emissions: lightweight, compact, ergonomic, safe POLARIS FID" analyser realized by

More information

QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE

QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE FABRICATION, MACHINING, METAL CASTING, LOAD TESTING, SAND BLASTING & PAINTING,

More information

Rubber Lining for Projects

Rubber Lining for Projects Rubber Lining for Projects Trelleborg Rubber Lining - the ONE safeguard for wear and corrosion protection Trelleborg Rubber Linings can be applied to many surfaces to significantly reduce abrasive wear,

More information

Accessories for GF and RA machines

Accessories for GF and RA machines Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling

More information

ACTIV-8 PLUS Insulated Conductor Bar

ACTIV-8 PLUS Insulated Conductor Bar ACTIV-8 PLUS Insulated Conductor Bar A product made in Australia www.conductix.com.au ACTIV-8 PLUS ACTIV-8 is the most widely used and stocked conductor rail in use in Australia. It was designed by Conductix

More information

Roofboxes ENITH. Zenith, Room for Prestige.

Roofboxes ENITH. Zenith, Room for Prestige. Roofboxes ENITH Zenith, Room for Prestige. 3 Sheer elegance. Zenith. a valuable investment in travel comfort. The Hapro Zenith is in a league of its own. Full attention has been given to its beautiful

More information

MECHAFIN MUCH MORE THAN WELDING EQUIPMENT WIRE DRIVE SYSTEMS & INTEGRATION MODULES

MECHAFIN MUCH MORE THAN WELDING EQUIPMENT WIRE DRIVE SYSTEMS & INTEGRATION MODULES MECHAFIN MUCH MORE THAN WELDING EQUIPMENT WIRE DRIVE SYSTEMS & INTEGRATION MODULES NOTHING MEETS YOUR REQUIREMENTS AS EFFICIENTLY AND EFFECTIVELY AS MECHAFIN WIRE DRIVE SYSTEMS 2 Our cost effective, high

More information

Electric Flow Boiler

Electric Flow Boiler Electric Flow Boiler EHC offer the most comprehensive range of electric boilers in the market and with our wealth of knowledge and technical expertise we have designed the Slim Jim Electric Flow Boiler

More information

Peerless Sigma Arm Mixers

Peerless Sigma Arm Mixers Peerless Sigma Arm Mixers The World Standard for Mixing Cookies, Biscuits, Crackers, Snacks, Creams and Fillings, Pet Foods and Specialty Applications Single Sigma Arm Mixers Suitable for cookies, crackers,

More information

Kempact 251R, 253R, 323R, 181A, 251A, 253A, 323A, 253RMV, 253AMV, 323RMV, 323AMV EN DA DE ES FI FR IT NL NO PL PT RU SV ZH.

Kempact 251R, 253R, 323R, 181A, 251A, 253A, 323A, 253RMV, 253AMV, 323RMV, 323AMV EN DA DE ES FI FR IT NL NO PL PT RU SV ZH. Kempact 251R, 253R, 323R, 181A, 251A, 253A, 323A, 253RMV, 253AMV, 323RMV, 323AMV Operating manual Bruksanvisning Gebrauchsanweisung Manual de instrucciones Käyttöohje Manuel d utilisation Manuale d uso

More information

NON-DESTRUCTIVE TESTING OF PIPELINES. L. Annila. Abstract

NON-DESTRUCTIVE TESTING OF PIPELINES. L. Annila. Abstract NON-DESTRUCTIVE TESTING OF PIPELINES L. Annila Abstract This paper shall present different, contemporarily available non-destructive testing (NDT) methods of pipelines and compare them to each other from

More information

Stainless steel process fittings

Stainless steel process fittings Page 1/6 Stainless steel process fittings Installation in pipe systems Installation in tanks and vessels Hygienic version FDA conformity of materials Probe length 120 mm 120 mm Availability of various

More information

Huffman Welding & Machine, Inc.

Huffman Welding & Machine, Inc. 6224 Avenue O Fort Madison, IA 52627 Phone: 319-372-7232 Fax: (319) 372-3469 www.huffmanwelding.com - Tool & Die, Fabrication, Sheet Metal, Electrical - - Millwright - - Industrial Maintenance - - Automated

More information

Welding. Module 19.2.1

Welding. Module 19.2.1 Welding Module 19.2.1 Hard Soldering Hard soldering is a general term for silver soldering and brazing. These are very similar thermal joining processes to soft soldering in as much that the parent metal

More information