MORTISE AND RIM CYLINDERS CYLINDERS

Size: px
Start display at page:

Download "MORTISE AND RIM CYLINDERS CYLINDERS"

Transcription

1 MORTISE AND RIM CYLINDERS CYLINDERS

2 E SERIES TABLE OF CONTENTS Page E Series features...2 E Series specs/how to order...2 E Series rings/spindles/mortise/service equipment... E Series special cylinders...4, EJJ4/EKK4 high security cylinders...6 Patented keying system...6 Page Eurocylinders... Cylinders and cams...8 E Cylinder special rings...9 E Series specs/accessories...0 E Series how to order... E Series how to order (continued)...2 E SERIES FEATURES E Mortise Cylinder Standard mortise applications require use of BEST s E series cylinders with standard E-C4 cam. BEST cylinders may be al tered to func tion with oth er man u fac tur ers locks by use of dif fer ent cams (see page 8) and dif fer ent cyl inder rings (see page 9). Special cyl in der vari a tions are available for most ap pli ca tions (see pag es 4 & ). BEST cylinders are ma chined from brass or bronze bar stock and are avail able in a variety of fin ish es. Ad di tion al se cu ri ty is pro vid ed by a set screw that mounts di ag o nal ly in the cyl inder wall and when tightened, holds the cylinder se cure ly in the housing. BEST mortise cylinders feature the BEST in ter change able core and may be mas ter- keyed into any existing BEST system. Contact your local Stanley Security Solutions sales office for in for ma tion on special cyl in der ap pli ca tions not listed in this catalog. 2E Rim Cylinder Standard rim cylinder ap pli ca tions re quire the use of BEST s E rim cyl in der series. BEST rim cylinders are interchangeable with other manufacturers rim cyl in ders. BEST rim cyl in ders are ma chined from solid bar stock and are avail able in a variety of fin ish es. The standard pack age for the BEST rim cylinder includes cylinder, RP ring package, E-S2 spin dle, clamp plate and clamp plate screws. BEST rim cyl in ders feature the BEST in ter change able core and may be master keyed into any existing Best system. Specifications A E Specifications A 2E Cylinder Nomenclature Dimension A Door Thick ness E-64 to 2 4 E-4 4 to 2 2 Cylinder diameter 2 To order: example: E4-C4-RP-626 Products covered by on or more of the following patents:,90,,94,42 Cylinder Nomenclature Dimension A 2E62 6 to 2 4 2E2 2 4 to Cylinder diameter 2 To order: example: 2E2-S2-RP-626 Door Thick ness HOW TO ORDER E SERIES HOW TO ORDER E 4 C4 RP 626 ** Series See p. 2 Core Housing 0 dummy 6 6-pin pin housing accepts all Best cores Function Code See p. 2 Length Code Cam or Spindle Rings Finish Blank Standard up to 6 C4 Standard cam C8 Adams Rite MS cam S2 Standard spindle RP Rim cylinder RP Tapered cylinder RP2 6 pin mortise RP pin mortise RP4 E mortise Satin* Bright* (See page 4-) (See code below) *Indicates extra cost ** Must specify keymark and number of keys or designate L/C for less core. (For special cams see page 8) (For special rings see page 9) 2 MORTISE AND

3 STANDARD RINGS RP Standard Ring Pack age The RP standard ring pack age in cludes a E-R ( 6 ) and E-R ( ) ring. E-R 6 E-R Standard Cam for E-64, and E-4 Mortise Cylinders is sup- Unless oth er wise spec i fied, the E-C4 cam plied on all E mor tise cyl in ders. STANDARD CAM Commonly used cams are list ed on page 8. Standard If a cam other than the variety listed is needed, a sam ple E-C4 Cam cam should be for ward ed to your local BEST office along with the lock manufacturer s name and lock se ries or iden ti fi ca tion number. STANDARD CAM RP Standard Ring Pack age The RP standard ring pack age in cludes a E-R ( 6 ) and E-R ( ) ring. E-R2 E-R 6 RP Ring Package The RP ring pack age for the E-62, E-2 and E-4 cylinders in cludes a E-R2 ( ) and a E-R ( ) E-R2 E-R RP Ring Package The RP ring pack age for the E-62, E-2 and E-4 cylinders in cludes a E-R2 ( ), E-R4 ( /4 ) and a E-R ( ) E-S2 Spindle (Steel) - A-4000-SH E-S Spindle (Bronze) - A-4000-Z Spindle - A-490; 2 Spindle - A-400 SPINDLES The E-S2 flat spindle is supplied standard on all E rim cylinders. If marine application is necessary, re quest ma rine construction (E-S bronze spindle and non -fer rous ma terials supplied). A five () inch spindle is avail able for thick door applications. MORTISE SERVICE EQUIPMENT ED2 ED22 ED2 Mortise Cylinder Wrench The BEST mortise cylinder wrench and test handle is an essential dual-pur pose tool. The double end is used primarily to install or re move BEST mor tise cylinders without marring the cylinder surface finish. The single end may be used to test the lock op era tion, as well as align the throw pins. To order specify: ED2 mor tise cyl in der wrench. ED22 Mortise Cylinder Cam Assembly Tool Mortise cylinder cams are quickly changed with the use of this tool. Approximate length 4. To order specify: ED22 assembly tool. ED22 Mortise Cylinder Thread Repair Die Tool for re-threading 2 diameter cylinders. To order specify: ED22 thread repair die. SPINDLES SERVICE EQUIPMENT E-R2 E-R4 4 E-R ED222 Cylinder Cam Testing Tool Special cylinder / wrench assembly. Screws pro vide rapid means to install cams for testing. To order specify: ED222 cam testing tool. ED22 Hole Tap For 2 Mortise Cylinder Tap tool used to re-thread housing threads for E mortise cylinders. A4009 Standard Throw Pins RIM CYLINDERS

4 E SERIES SPECIAL CYLINDERS Special Length Mortise Cylinders Spec i fi ca tions Diameter: 2 Uses: Special thickness doors Length: See chart Cam: Standard E-C4 cam (see page 2) supplied unless otherwise specified. Rings: The RP2 (for 6 pin) and RP (for pin) package are supplied standard (page 2) unless otherwise specified. To order: Designate desired length from chart under length code step D as shown (page 2). Example: E-4-2 A * E4 Mortise Cylinder Length Chart Length Designate this number on step A D of order pro ce dure (page 2) *ONLY AP TO E4 Riveted cams Screw-on cams 2 Diameter Mortise Cylinder Spec i fi ca tions Diameter: 2 Length: 6 pin ; pin 4 Door thickness: 6 pin to 2 4 (includes trim) pin to 2 2 Cam: Standard E-C cam supplied unless otherwise specified. Rings: The RP4 ring package is supplied with E cylinders. This package includes a E-R2 ( ) and a E-R4 ( 4 ) ring. To order: Designate E on step A of order procedure (page 2) Example: E-4-C-RP4-626 A * E4 Options: E-04-Dummy, E-A4-Turn knob, E-B4-Dust Cover. Adaptor ring to allow E4 cyl in ders to fit a E tapped hole - A269. Dummy Mortise and Rim Cylinders Specifications Diameter: 2 Length: Mortise ; Rim Rings: Ring packages are supplied standard as follows: Mortise: RP2 ring package(see page 2) Rim: RP ring package (see page ) To order: Designate 0 on step B of order procedure (page 2) Example: E-02 E04-slot in back-espl-6-b469 E04-slot in back-espl--b4620 E02-slot in face-espl-6-a0 Special E04 with slot on back- ESPL--B4620 Special length E04 cylinders: 2 ESPL--A969 4 ESPL--A20 Taper Head Mortise Cylinder Spec i fi ca tions Diameter: 2 Length: 6 pin 2 /2 ; pin 4 Door thickness: 6 pin- to 4 (including trim) pin (including trim) pin 4 (without trim) Cam: Standard E-C4 cam sup plied unless otherwise spec i fied. Rings: The RP ring package (page 2) is A * E6 supplied standard with all E taper cylinders (page 2). To order: See page 2. Example: E-6-C8-626 Turn Knob Cylinders Specifications Diameter: 2 Length: Mortise- 6 pin ; EA6A4 Rim- 6 pin 6 - EA6A2 Cam: Standard E-C40 cam supplied unless oth er wise specified (see page 2). Rings: Ring packages are supplied standard as follows (unless otherwise specified): Mortise 6 pin: RP2 ring package EA6A (see page 2) *ADA Turn Knob Shown To order: Designate A4 on step C of order procedure (page 2). Example: EA-6A4-C40-RP-626 R-function turn knob cylinders RH-ESPL-6-B40 LH-ESPL-6-B40 Special length cylinders. -ESPL-6-A206. -ESPL-6- A ESPL-6-B2409 NOTE: These should not be used in con junc tion with deadbolt function BEST mortise locks. To order the old style UP thumb turn contact your local BEST dealer. E04 2E02 * Reference to Length A on Mortise Cylinder Length Chart. 4 MORTISE AND

5 Mortise and Rim Cylinders with Dust Covers Specifications Diameter: 2 Length: Mortise- 6 pin ; pin 9 2 Rim- 6 pin 6 ; pin 2 Cam: Standard E-C4 cam (see page 4) E series supplied unless otherwise specified. Rings: Ring packages are supplied standard as follows (unless otherwise specified): Mortise 6 pin: RP2 ring package (see page 2), EBB4 Mortise pin: RP ring package (see page 2 Rim 6 and pin: RP ring package (see page 2) To order: Designate B4 on step C of order procedure (page 2). Example: EB B4 C4 RP 626 Mortise Cylinder Direct Motion Cam Specifications Diameter: 2, slabbed, threaded to the head Length: 6 pin 6 ; pin 2 From head to cam Cam: C228 - cabinet cylinder cam standard. Cam prevents key from EDD4 being withdrawn in unlocked position. Rings: The RP2 ring package is supplied standard for 6-pin and -pin unless otherwise specified (page 2) To order: Designate D4 on step C of order procedure (page 2). Example: ED D4 C228 RP 626 To order with a utility cam lengths from cylinder length (RH) ESPL--A062 x C228 (LH) ESPL--A0624 x C cylinder length (RH) ESPL--A84 x C228 Standard Mortise Cylinder Lost Motion Cam Specifications Diameter: 2 Length: 6 pin ; pin 4 Cam: E-C20 - cam supplied standard E-C20 is cam E-C4 (page 2) set up for lost motion. Specify cylinder handing as for hand and side of door. Examples: RHO (Right Hand Outside); RHI (Right Hand Inside); LHO (Left Hand Outside); LHI (Left Hand Inside). EFF4 Rings: The RP2 ring package is supplied standard for 6-pin and -pin unless otherwise specified (page 2) To order: Designate F4 on step C of order procedure (page 2). Example: EF F4 C20 RP 626 RHO Square Head Mortise Cylinder-Wrench Resistant For use in Narrow Stile Doors Specificatons Diameter: 2 Length: 6 pin 4 ; pin 2 Cam: As specified on order (see page 8 for cams available) Rings: Package includes special slip ring To order: Designate C4 on step C of order procedure (page 2) ECC4 Example: EC C4 C8CR R00 is length. Other length rings are available. Slabbed Cabinet Mortise Cylinder Lost Motion Cam Specifications Diameter: 2 Length: 6 pin (effective length) pin 4 (effective length) Material: Solid brass or bronze Cam: C229- cam supplied unless otherwise specified (E-C229, when ordered separate from unit). Specify hand: RH or LH Rings: The RP2 ring package is supplied standard for 6 and -pin unless otherwise specified (page 2) To order: Designate E4 on step C of order procedure (page 2). Example: EE E4 C229 RP 626 RH Special Length: 2 cylinder length ( 4 effective length) RH-ESPL-A-980; LH-ESPL--A9 2 4 cylinder length (2 effective length) RH-ESPL--A88; LH-ESPL--A882 Hotel/Motel Mortise Cylinder Shifting Cam Specifications Diameter: 2 Length: Mortise 6 pin 6 ; pin 2 Cam: C28 or cam supplied as specified (see page 8) Rings: The RP2 ring package is SPECIAL CYLINDERS EEE4 *LH Shown EGG4 supplied standard for 6-pin and -pin unless otherwise specified (page 2) To order: Designate G4 on step C of order procedure (page 2). Example: EF G4 C28 RP 626 E SERIES RIM CYLINDERS

6 HIGH SECURITY SERIES E HIGH SECURITY CYLINDERS EJJ4 EKK4 Cylinder Features Designed for high security applications, BEST offers the EJJ4 high security cylinder and special C in ter change able core. This special cylinder is listed by Underwriters Laboratories as meet ing UL4 stan dard for key locks. The cylinder pro vides additional strength through a hardened stainless steel alloy ring, face and keyway disc. Cyl in der also con forms to ANSI A6. mortise cyl in der, Grade A. The EJJ4 cylinder must be combinated at the fac to ry. The EKK4 cyl in der is available where UL listing is not a requirement, and can be ordered uncombinated. NOTE: Both EJJ4 and EKK4 require long blade key for operation. EJJ4 EKK4 Cylinder Specifications Diameter: (NS-2A) threaded mortise cylinder. Mounting length: pin 6. Material: Brass (cylinder) and stainless steel ring. Finish: 60 (nickel plated satin stainless steel material). Cylinder rings: High security wrench resistant, ma chined from stainless steel, hardened, and nickel plated. Spe cial door preparation re quired. Diameter of hole 4. Cylinder face, Keyway disc.: Stainless steel, hardenedcam: Supplied with C28 cam. See page 8 for special cams. To order: Designate J4 or K4 on Step C order procedure. (see page 2.) EJJ4 High Security Cylinder EKK4 High Security Cylinder CORMAX PATENTED KEYING SYSTEM CORMAX PATENTED KEYING SYSTEM BEST CORMAX is the premier patented keying system offered by Stanley Security Solutions. CORMAX will meet your needs for security, key control, and convenience. A simple solution with no compromising allowed. CORMAX is the upgrade path for existing BEST Standard, Premium, and MX8 customers; and it is an essential element of non-residential access control as security administrators strive to eliminate the unauthorized duplication of keys. CORMAX offers the following features and benefits: CORMAX A long-term US utility patent that guarantees the extended useful life of the system through 202. Patented Keying System A second, independent locking mechanism that utilizes a patented set of built-in side pins to provide higher security. Several levels of geographical exclusivity, including national exclusivity, are available via the patented side pin feature. CORMAX cores and keys are available exclusively through Stanley sales offices. Key blanks are only sold to individuals authorized by the customer to ensure key blanks do not end up in the possession of unauthorized personnel either inside or outside the customer s facility. CORMAX cores are certified to meet the security, safety, and reliability requirements of BHMA A6. Grade. Picking and drilling resistance options are available if higher levels of security are desired. Complete factory masterkeying service offered, and at no charge with purchase of BEST locksets and PHI exit devices. Keyways are organized in families of four keyways each, with double-milled and quad-milled key levels to facilitate the design of masterkey systems in multi-building campuses. BEST CORMAX cores are compatible with all existing BEST interchangeable core housings, eliminating the need for new or modified locksets. 6 MORTISE AND

7 SPECIAL EUROPROFILES Mortise locksets from a number of different international manufacturers can be in cor po rat ed into your BEST mas ter keyed system by replacing the cylinder with a Best Eurocylinder and C Eu ro pe an interchangeable core. When ordering, please specify the lock man u fac tur er s name and their model number. Some Euro profile cyl in ders will accept Best stan dard core rather than the C core. Please specify the E option when ordering stan dard cores for use in Eurocylinders. Best Access Systems order nomenclature and several re quired critical dimensions are listed below. Please specify, as requested when or der ing. EUROCYLINDERS EUROCYLINDERS Flush Mount Cylinder Retaining Screw Rab bet ed Mount 8EEE Europrofile* (* Requires use of C core) Rabbeted Mount Front View 8EHH6 for locks manufactured in Germany Critical Dimensions - Europrofile A Dimension to center of lockset case. De ter mined by measuring from set screw location to outside of door face. B Door thickness. C Dimension from center of key rotation to center of handle rotation, if other than 2mm. Maximum allowed 4mm. Minimum allowed mm C European Core HOW TO ORDER: EUROPROFILE 8EE 2mm 4mm 6mm Keyed Alike 69 Eurocylinder A Dimension B Dimension C Dimension Keying Instructions Finish: 69 - Satin Nickle Plated Satin Chrome Plated RIM CYLINDERS

8 CYLINDERS AND CAMS CYLINDERS AND CAMS Special cams are avail able which will op er ate most mor tise locksets, re gard less of make or func tion. With these cams,your mas ter keyed system can be ex tend ed through the use of re place ment cyl in ders with cams similar to those being used. A few of the cams are il lus trat ed. Other designs are available upon request. All cams available are de signed for use on BEST mortise cylinders. WARNING Best Access Systems desires to provide up-to-date and reliable product adaptation uses. However, BEST can not guar an tee the quality of other manufacturers locksets. In addition, other lock manufacturers may make changes to their product that affect the operation and compatibility of our core and cylinder adaptation. When this occurs, those manufacturers have no ob li ga tion to notify BEST. If you are using a BEST cylinder in another man u fac tur ers lockset and find that it does not operate properly for any reason, please contact your local BEST sales office immediately. NOTE: Cams not drawn to scale C4 step E, page 2) E - C4 C8 step E, page 2) E - C8 C2 step E, page 2) E - C2 C28 step E, page 2) E - C28 C29 (when ordered with cylinder, step E, page 2) E - C29 C6 (when ordered with cylinder, step E, page 2) E - C6 C6 step E, page 2) E - C6 C8 step E, page 2) E - C8 C9 step E, page 2) E - C9 C208 (when ordered with cylinder, step E, page 2) E - C208 C20 step E, page 2) E - C20 C28 (when ordered with cylinder, step E, page 2) E - C28 NOTE: While certain functions may require a different cam, in general the following cams will work for these common applications. C26 (when ordered with cylinder, step E, page 2) E - C26 C4 Standard cam C2 Arrow mortise (latch) C6 Corbin-Russwin mortise Arrow mortise (deadbolt) C8 Adams Rite C9 Best 0H mortise (latch) C208 Sargent C28 Best 4H mortise C28 Best 0H mortise (deadbolt) C26 Schlage L mortise 8 MORTISE AND

9 E-R RING CHART Overall Length Available Nomenclature if Ordered With Cylinder (see step F page 2) R02 E-R02 6 R0 E-R0 4 R04 E-R04 6 R0 E-R0 R06 E-R06 6 R0 E-R0 2 R08 E-R R09 E-R09 R0 E-R0 6 R E-R 4 R2 E-R2 Nomenclature if Ordered Without Cylinder E-R Straight Ring SPECIAL RINGS Specifications - E-R To be used with BEST E series ( 2 ) Cylinders. Dimensions inside diameter- 2, outside di am e ter 6 length-see chart at left. Material solid brass or bronze Finish available in 60, 606, 62, 6, 62 and 626 E SERIES E-R8 RING CHART Overall Length Available Nomenclature if Ordered With Cylinder (see step F page 2) R802 E-R802 6 R80 E-R80 4 R804 E-R804 6 R80 E-R80 R806 E-R806 6 R80 E-R80 2 R808 E-R R809 E-R809 R80 E-R80 6 R8 E-R8 4 R82 E-R82 6 R8 E-R8 8 R84 E-R84 6 R8 E-R8 R86 E-R86 Nomenclature if Ordered Without Cylinder E-R8 Tapered Slip Ring- Wrench Resistant Specifications - E-R8 To be used with BEST E series ( 2 ) Cylinders. Dimensions inside diameter - 2, inside rim counter-bored to protect cylinder head. Outside diameter - tapered 2 to 29 length-see chart at left. Material solid brass or bronze Finish available in 60, 606, 62, 6, 62 and 626 RIM CYLINDERS 9

10 E SERIES UTILITY CYLINDER LOCK E /4 Cylinder Specifications The E utility cylinder lock fits standard 4 diameter cylinder installations such as wood or metal desks,file cabinets, vending machines, utility and storage cab i nets, elevators and security alarm control panels. The com plete E as sem bly includes a combinated 4 cyl in der with cam, hex nut, lock washer and spacer collar. Maximum mounting surface thickness E utility cylinder locks may be mounted on surfaces with the following maximum thickness: E6 6, E 2 2 Keying May be keyed individually, keyed alike or masterkeyed into a new or existing Best standard masterkeyed se cu ri ty system. Service E cylinders may be recombinated and serviced onsite. Special service equipment is available (see Service Equipment Section of Best catalog). Finish 626 satin chrome only Refer To The Following Procedure When Ordering See Order Example At Bottom Of Next Page. A Cam Motion and Degree of Rotation When ordering E cylinders, specify the cam motion type and degree of rotation. Available cam motion types are listed below. Different type motions are limited to different degrees of key rotations. Type A Direct motion - Key and cam rotation is direct. Key may be removed in locked position only. Motion is 60 degrees right or left. Type B Limited motion - Key and cam rotation is direct. Key may be removed in locked position only. Motion is limited to 90 degrees or 80 degrees right or left. Type C Lost motion. Cam rotates 90 degrees right or left. Key rotates 60 degrees. Key removal with cam in locked or unlocked position. Type D Throw member drive - Key and drive motion is direct. Key may be removed in locked position only. Motion is 60 degrees right or left. B 4 Determine Ring Length A B E Combinating and Service Accessories Nomenclature Item Nomenclature Item A-8049 E /4 Hex Nut A-2068 Washer for cylinder body head A-484 Cam Screws A-404 Lock washer for cam screws ED26 E capping block ED2 E thread tap - /4 x #24 ED24 E /4 metal punch and die set (slab) ED262 E cap depressor ECP6 Slide cap - 6 pin ECP Slide cap - pin ES E springs *NOTE: The E lock is not available for Premium and Peaks keying systems. A spacer collar may be required to position the cam for proper lock operation. The spacer collar is installed be tween the E cylinder head and the mount ing sur face. To de ter mine the proper length of the spacer collar, add to geth er: the desired distance from the cam to the inside of the mounting surface ( A above) to the measured thickness of the mounting surface ( B above). Then, subtract this total from: 2 when installing a E6, or when installing a E. The remainder is the collar length, which is illustrated. To properly order spacer collars, designate the fol low ing no men clature for the length desired: E Spacer Collar Length Chart Length Nomenclature To order separately 6 R0 E-R0 R02 E-R02 6 R0 E-R0 4 R04 E-R04 6 R0 E-R0 R06 E-R06 6 R0 E-R0 2 R08 E-R08 0 MORTISE AND

11 C Select Proper Cam Type Cam Cams for E cylinders are available with a number of variations to suit the particular application as required. Two major variations that must be designated on the order are: A.) The cam type, and B.) The cam length. Cam Types The following cam types are available for the Best E cylinder. Other designs are available upon request. (See page 8) E SERIES D Determine Cam Length Cam length is determined by measuring from center of the cam rotation to the tip of the cam. Straight Cam Length Code # E Length Offset Cam Length Code # Cam Mounting Position and Cam Di rec tion 2 E SERIES C Straight Cam Fixed Motion C Straight Cam Lost Motion 4A&4B Offset Cam Lost Motion 2A&2B Offset Cam Fixed Motion Cam Types Defined (Listed relative to motion/rotation) C Straight cam mounted for fixed motion operation (used in conjunction with type A and type B motions). To order cam separately, des ig nate E-C and length from code chart at option D. C Straight cam mounted for lost motion operation (used in conjunction with type C cam motions). To order cam separately, des ig nate E-C and length from code chart at option D. 2A Offset cam (inward mount) for lost motion operation (used in conjunction with type A and type B motions). To order cam separately, designate E-C2A and length from code chart at option D. 2B Offset cam (outward mount) for fixed motion operation (used in conjunction with type A and type B motions). To order cam separately, designate E-C2B and length from code chart at option D. 4A Offset cam (inward mount) for lost motion operation (used in conjunction with type C cam motions). To order cam sep a rate ly, designate E-C4A and length from code chart at option D. 4B Offset cam (outward mount) for lost motion operation (used in conjunction with type C cam motions). To order cam sep a rate ly, designate E-C4B and length from code chart at option D. D Direct throw member drive and tailpiece. Throw pins engage cylinder to flat spindle tailpiece. The standard flat spin dle tailpiece is 6 and may be cut to length desired. To order spindle sep a rate ly, des ig nate E-D. 2A & 4A Mounted Inward RIM CYLINDERS D Type Direct Throw Member Drive and Tailpiece Cams may be mounted in one of four clock positions as pictured below. Designate cam mounting and rotation direction (right- R left- L ). Key is only removable in the locked position, unless ordering type C. (Available in locked and unlocked po si tions.) o clock = 6 o clock = 6 9 o clock = 9 2 o clock = 2 2B & 4B Mounted Outward HOW TO ORDER A B C D E E A E A C R08 4B 20 2 R Series Lock Body E /4 6 6 pin pin Keyway designate specific keyway (A,E etc.) see note page 0. Combinating Code uncomb. 2-A2 system -A system 4-A4 system Cam Motion A-direct B-limited C-lost D-throw member drive (see A page 0) Ring Length R0- /6 R02- /8 R0- /6 R04- /4 R0- /6 R06- /8 etc (see B page 0) Cam Type C-fixed straight 2A-fixed offset in 2B-fixed offset out C-lost motion 4A-lost motion offset in 4B-lost motion offset out D-direct (see C above) Cam Length 0- /8 2- /4 4- /8 6- etc., in /6 of an inch (see D above) Mounting Position o clock 6 6 o clock 9 9 o clock 2 2 o clock (see E above) Cam Direction Degree of Rotation Finish R right L left standard (see E above) (see A page 0)

12 E SERIESHOW TO ORDER E SERIES HOW TO ORDER Function or Length Series/Description Code - /2 Diameter Cylinders 2E Standard rim 2 E Standard mortise 4 Tapered mortise 6 Dummy rim / mortise (0-pin only) 02/04 EA Turn knob-rim / mortise (6-pin only) A2/A4 EB Rim / mortise with dust cover B2/B4 EC Square head mortise C4 ED Slabbed direct motion (-pin only) D4 EE Slabbed lost motion (-pin only) E4 (Specify RH or LH hand.) EF Standard lost motion (Note ) F4 EG Hotel shifting cam G4 EJ High security UL-listed (-pin only **) J4 EK High security Non-UL (-pin only**) K4 E Series Special Length Mortise Cylinders - /8 22 Each additional /8 (- /2 to 6 ) 24 to 96 E Series Mortise-- /2 diameter (-pin**) 4 Length code Cyl length 22 /8 24 /2 26 /8 28 /4 0 / /8 6 2 /4 8 2 / / / / / /8 2 /4 4 /8 6 /2 8 /8 Length code Cyl length 60 /4 62 / / /4 0 4 /8 2 4 /2 4 4 /8 6 4 /4 8 4 / /8 84 /4 86 /8 88 /2 90 /8 92 /4 94 / ** Only Standard and CORMAX M Series keying available on EJ and EK cylinders. For more information on Stanley Security Solutions products, services, and office locations visit our web site at Product information contained in this catalog has been com piled and presented with as much care and com plete ness as is reasonably possible. Errors or mistakes may be present, and in many cases, reliance has been placed on information supplied by other manufacturers which may be in error or which may be subject to changes or modifications by the manufacturer without notice and without obligation. Therefore, no guar an tee can be made or should be assumed or implied with regards to product in for ma tion con tained in this catalog. 2 Stanley Security Solutions, Inc. 66 E. th Street Indianapolis, Indiana Stanley Security Solutions, Inc. 0M BAS00

1E 7 4 C4 RP3 626 ** Cylinder Core Function Standard Cam or Rings Standard

1E 7 4 C4 RP3 626 ** Cylinder Core Function Standard Cam or Rings Standard MORTISE AND RIM CYLINDERS CYLINDERS 1E SERIES TABLE OF CONTENTS Page Page 1E Series features...2 Eurocylinders...7 1E Series specs/how to order...2 Cylinders and cams...8 1E Series rings/spindles/mortise/service

More information

ASSA HIGH SECURITY LOCKS ASSA Twin 6000. ASSA Twin 6000, Twin Exclusive & V10. ASSA cylinders can be supplied in the following keying forms:

ASSA HIGH SECURITY LOCKS ASSA Twin 6000. ASSA Twin 6000, Twin Exclusive & V10. ASSA cylinders can be supplied in the following keying forms: ASSA Twin 6000 ASSA Twin 6000, Twin Exclusive & V10 Combining uncompromising physical security with the highest level of Key control, ASSA high security cylinders offer the ideal solution for situations

More information

ILCO Cylinders. Cams and Tailpieces. Keyways. Finish Codes. 1 Standard (863G) Composite NB HR1. Composite NA R1064E. 2 Adams Rite (863A) Arrow AA 1179

ILCO Cylinders. Cams and Tailpieces. Keyways. Finish Codes. 1 Standard (863G) Composite NB HR1. Composite NA R1064E. 2 Adams Rite (863A) Arrow AA 1179 Keyways Cams and Tailpieces Arrow AA 1179 Composite NA R1064E Composite NB HR1 1 Standard (863G) 2 Adams Rite (863A) Corbin 60 CA 1001EH Corbin CD 59A1-A2 Dominion DA S54F UB Lori L100 Eagle 11929 Harloc

More information

HARDWARE STANLEY ARCHITECTURAL HARDWARE

HARDWARE STANLEY ARCHITECTURAL HARDWARE HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet

More information

GENERAL INFORMATION TABLE OF CONTENTS

GENERAL INFORMATION TABLE OF CONTENTS PADLOCKS PADLOCKS GENERAL INFORMATION TABLE OF CONTENTS General Information...2 Patents...2 11B/12B Series...3 21B/22B Series...4 41B/42B Series...5 Accessories / Options... 6 9 Car seal option...6 Weather

More information

Cabinet Locks. Benefits:

Cabinet Locks. Benefits: Cabinet Locks Medeco high security cabinet locks are specifically designed for drawer or cabinet door applications where a conventional utility cam lock may not be suitable. Cabinet locks utilize heavy-duty

More information

Decorative Lever Designs

Decorative Lever Designs Decorative Lever Designs 3 & C 4 & K 12 14 & D 15 & A 16 & B 17 50 51 52 53 54 55 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 2 www.stanleysecuritysolutions.com

More information

Padlocks. 146 Padlocks FEATURES

Padlocks. 146 Padlocks FEATURES 146 Padlocks Padlocks FEATURES Medeco 3 BiLevel Medeco X4 CLIQ Medeco XT Nexgen Protector II Protector II body accepts 6 pin knob style cylinders Protector II is available as key retaining only System

More information

Interchangeable Core Products

Interchangeable Core Products Staples Print Solutions 24-0002800 QJ5 1234 CYANMAGENTAYELLOWBLACK 04/25/2013 CONTROL SECURITY Killeen Security Products Killeen Machine Tool Co., Inc. 33 Hermon Street Worcester, MA 01610 1-800-577-5397

More information

An ASSA ABLOY Group brand. 4800LN Series. Interconnected Locks

An ASSA ABLOY Group brand. 4800LN Series. Interconnected Locks An ASSA ABLOY Group brand 4800LN Series Interconnected Locks performance meets style introduction The Yale 4800LN series interconnected locksets combine our key-in-lever locksets with the added safety

More information

Simplex 1000 Series. All Simplex Controls are less I.C. core. 1000 Series packed with both ASA and T strike.

Simplex 1000 Series. All Simplex Controls are less I.C. core. 1000 Series packed with both ASA and T strike. Kaba Mechanical Lock Price Book, May 1, 2015 Simplex 1000 Series All Simplex Controls are less I.C. core. 1000 Series packed with both ASA and T strike. KNOBS 26D 05 03 1011 Standard Access Control 450.50

More information

Degree Key System. Technical Manual

Degree Key System. Technical Manual Degree Key System Technical Manual Copyright 03-04, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission

More information

1000 Series Knob Pushbutton Locks

1000 Series Knob Pushbutton Locks 1000 Series Knob Pushbutton Locks This series is ideal for limiting access in high-traffic areas. Two access control functions are available in addition to standard combination access control: Key Override:

More information

Door Hardware Lock Specifications

Door Hardware Lock Specifications Door Hardware Lock Specifications Directory Lock Type Page Exterior Mortise Lock Specifications... 2 2.5 Backset Mortise Locks Specification... 3 2.5 Backset Mortise Lock Functions (6301, 6310, 6315, 6318,

More information

MA-Series. Service manual

MA-Series. Service manual MA-Series Service manual Contents 4 Introduction 5 Lock assembly drawing index 8 Lock Assemblies 9 MA101 - Passage or Closet Latch 10 MA161 - Exit or Communicating Lock 11 MA301 - Privacy, Bedroom/Bath

More information

CONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE

CONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise

More information

Exit Devices TABLE OF CONTENTS

Exit Devices TABLE OF CONTENTS Exit Devices TABLE OF CONTENTS A Accessories, 4500 Series Grade 1 Alarm Kit... 15 Alarm Kit Latchbolt Monitor Switch... 17 Alarm Kit Tamper Switch... 18 Bottom Latch Assembly... 13 Cylinder Dogging Conversion

More information

Basic Technical Fundamentals of Builders Hardware Mortise, Bored and Auxiliary Locks

Basic Technical Fundamentals of Builders Hardware Mortise, Bored and Auxiliary Locks Mortise, Bored and Auxiliary Locks Copyright 2002, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Page SARGENT History...................................................

More information

Basic Technical Fundamentals of Builders Hardware

Basic Technical Fundamentals of Builders Hardware Basic Technical Fundamentals of Builders Hardware Mortise Locks Bored Locks Auxiliary Locks Inside Cover (blank) Table of Contents SARGENT History...4 Basic Name of Products...5, 6 Doors (A Brief Review)...7

More information

Cylinders. SARGENT Cylinder & Key Control Products. High Security. Patented Keyway. Open Conventional. Table of Contents.

Cylinders. SARGENT Cylinder & Key Control Products. High Security. Patented Keyway. Open Conventional. Table of Contents. Cylinders Copyright 2004-2010, 2014, 2015, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Cylinders Table of Contents Key Management Software... 1 Features, Benefits &

More information

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate

More information

Cylinders, keys and keying systems

Cylinders, keys and keying systems Cylinders, keys and keying systems Contents 4 Key and cylinder marking 5-7 How to specify master keying 8 Keyways and construction keying 9 Standard cylinders - Conventional and auxiliary cylinders 10-12

More information

Call for Availability

Call for Availability A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You

More information

STANLEY DOOR CLOSERS D-4550/D-4551 D-4550 / D-4551 SERIES OOR CLOSERS

STANLEY DOOR CLOSERS D-4550/D-4551 D-4550 / D-4551 SERIES OOR CLOSERS STANLEY DOOR CLOSERS D-4550/D-4551 D-4550 / D-4551 SERIES OOR CLOSERS 1 GENERAL INFORMATION TABLE OF CONTENTS Page General Information... 2 4 How To Order...4 Standard (Pull) Application...5 Parallel Arm

More information

S&G Model 2937 Group 1 Combination Lock

S&G Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions S&G Model 2937 Group 1 Combination Lock NOTE: READ COMPLETE INSTRUCTIONS BEFORE INSTALLATION These instructions should be followed when installing the

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

Sarasota Splash Back Prep and Shine Paint Restorer Inside Front Cover

Sarasota Splash Back Prep and Shine Paint Restorer Inside Front Cover Caution: Read entire label before using product. Do-It-Yourself PAINT RESTORER KIT Kit Contains: 1-16 oz. Water-based, Biodegradeable Liquid Prep 1-16 oz. Aerosol Shine Spray 1 - Spray Nozzle 2 - Scrub

More information

Table of Contents. Table of Contents. Degree Key System

Table of Contents. Table of Contents. Degree Key System Degree Key System Copyright 2011, 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent

More information

1 Door Tall Unit ASSEMBLY GUIDE. Page 1 of 9. WARNING: Contains small parts, keep out of reach of children.

1 Door Tall Unit ASSEMBLY GUIDE. Page 1 of 9. WARNING: Contains small parts, keep out of reach of children. Page 1 of 9 ASSEMBLY GUIDE 1 Door Tall Unit IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present If any parts are missing from Parts List 1, please

More information

Standard, Small Format IC & Patented DORMA. Key Systems

Standard, Small Format IC & Patented DORMA. Key Systems Standard, Small Format IC & Patented DORMA Key Systems Table of Contents Introduction A properly designed key system is crucial to creating a safe and secure building. Your key system needs to balance

More information

Key in Knob & Key in Lever

Key in Knob & Key in Lever Key in Knob & Key in Lever We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents 530 Series Key in Knob & Key in Lever Door Furniture Locksets 930/950

More information

Lathe Milling Attachment

Lathe Milling Attachment Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,

More information

KEY CYLINDER PLATFORMS

KEY CYLINDER PLATFORMS KEY CYLINDER PLATFORMS Inspired technology, unbeatable performance. Flexibility and security combine in Abloy s comprehensive range of sleek and effective door cylinders. Uniclass L41818 Version: August-11

More information

Mechanical Entry Locksets

Mechanical Entry Locksets Mechanical Entry Locksets We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Mechanical Entry Lockset Nexion Mechanical Entry Lever Options Nexion

More information

Preferred/Classic. Technical Manual

Preferred/Classic. Technical Manual Preferred/Classic Technical Manual Table of Contents Section 1 Section 2 Section 3 Section 4 Section 5 Introduction Product Information Key Cutting & Pinning Key Control & Record Keeping Cylinder Installation

More information

SECTION 6. Glass Storefront Doors:

SECTION 6. Glass Storefront Doors: SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail

More information

Glossary of TermsRev G

Glossary of TermsRev G Glossary of TermsRev G Revised Feb 12, 2001 1 A access card credit card-sized device encoded with identification data and used to access a door. access code sequence of digits that is included in a personal

More information

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING

More information

Andersen Clad Inswing Entry Doors (2001 to Present)

Andersen Clad Inswing Entry Doors (2001 to Present) Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts

More information

Speed-Mat Rectangle Cutter

Speed-Mat Rectangle Cutter Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.

More information

Product Catalog & Technical Manual

Product Catalog & Technical Manual Manual Page: 1 Table of Contents Page History of ASSA, Incorporated...2 General Information...3 Keys and Keying...5 Architectural...11 Mortise Cylinders...12 High Security Mogul Cylinders...20 Rim Cylinders...25

More information

1.8 CRANKSHAFT OIL SEALS

1.8 CRANKSHAFT OIL SEALS SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the

More information

D-4990 PRECISION HARDWARE

D-4990 PRECISION HARDWARE D-4990 PRECISION HARDWARE INTRODUCTION TABLE OF CONTENTS Page Introduction...2 ADA Blue-Paint Access...2 Features/Benefits...3 Electrical Data Specifications...4 How To Order...4 INTRODUCTION Page Standard

More information

www.hammondmfg.com General Accessories Hardware

www.hammondmfg.com General Accessories Hardware Heavy Duty Door Clamping Junction Box Padlock Kit Quick Release Clamp Replacement hardware for use on all 1418 and 1447 Series enclosures. Formed heavy gauge stainless steel clamp with stainless steel

More information

INSTALLATION INSTRUCTIONS for Bifold Doors (JII103)

INSTALLATION INSTRUCTIONS for Bifold Doors (JII103) Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast

More information

SHOP NOTES METAL SHAPER FOR YOUR SHOP

SHOP NOTES METAL SHAPER FOR YOUR SHOP SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,

More information

Mechanical Digital DX Locks

Mechanical Digital DX Locks ASSA ABLOY, the global leader in door opening solutions Contents Mechanical Digital DX Locks Overview 1 002 Digital DX Deadlatch 2 530 Digital DX Entrance Set 3 3572 Digital DX Mortice Locksets 4 3582,

More information

Reachout Lock Replacement for Andersen 2-Panel and 4-Panel 400 Series Frenchwood Gliding, 200 Series Narroline, and Perma-Shield Gliding Patio Doors

Reachout Lock Replacement for Andersen 2-Panel and 4-Panel 400 Series Frenchwood Gliding, 200 Series Narroline, and Perma-Shield Gliding Patio Doors for Andersen 2-Panel and 4-Panel 400 Series Frenchwood Gliding, 200 Series Narroline, and Perma-Shield Gliding Patio Doors Thank you for choosing Andersen. For questions call 1-888-888-7020. For more information

More information

Rose Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au

Rose Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au Rose Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Robert Watson Series 20 Symphony Series 1420 Symphony Series 1360 Series Door

More information

Type 1, 3, & 3R Enclosures

Type 1, 3, & 3R Enclosures Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................

More information

Sliding Door Locks & Hardware. 5 c

Sliding Door Locks & Hardware. 5 c 5 Sliding Door Locks & Hardware 5 c 3 4 6 8 9 Sliding Door Lever Lock Sliding Lever Lock Features Ordering String Sliding Lever Lock Series SLL Functions Trim Sets Specifications 2016 02 2 FSB North America

More information

RIM MOUNTED AND DUAL ACCESS LOCKS

RIM MOUNTED AND DUAL ACCESS LOCKS RIM MOUNTED AND DUAL ACCESS LOCKS Introduction Introduction UNION offers a range of rim-mounted and dual access locks, which are ideal for commercial and residential use. The range includes rim locks and

More information

Dive Rite 200 & 300 Bar Isolator Manifold Service Manual

Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Principal Photography and Text by Pete Nawrocky Copyright 2003 Lamartek Inc. D/B/A Dive Rite 0 Warning This manual is only to be used as a guide

More information

Patented technology ASSA P600. Reliable master key system. ASSA ABLOY, the global leader in door opening solutions

Patented technology ASSA P600. Reliable master key system. ASSA ABLOY, the global leader in door opening solutions Patented technology ASSA P600 Reliable master key system ASSA ABLOY, the global leader in door opening solutions 2 The ASSA P600 cylinder finish has been designed to match the finish of other architectual

More information

Working Drawing and Assemblies. Chapter 10

Working Drawing and Assemblies. Chapter 10 Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.

More information

Installation Instructions: (Part # SB76880) XRC Armor Front Fender Kit

Installation Instructions: (Part # SB76880) XRC Armor Front Fender Kit WARNING: Check with Local and State laws before installing this accessory! NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included: Qty Parts Included:

More information

PHA 2000 PHB 3000 EXIT PAD

PHA 2000 PHB 3000 EXIT PAD PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER

More information

Mini USB and USB 2.0-IP67 Connector System

Mini USB and USB 2.0-IP67 Connector System Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet

More information

ABLOY EXIT. Functional and technical descriptions Single and double leaf doors. An ASSA ABLOY Group brand

ABLOY EXIT. Functional and technical descriptions Single and double leaf doors. An ASSA ABLOY Group brand SSFN 014/2 2 ABLOY EXIT Functional and technical descriptions Single and double leaf doors An ASSA ABLOY Group brand ABLOY EXIT - EXIT PRODUCTS It is time to take the exit safety standards to a new level.

More information

Quick response concealed horizontal sidewall sprinkler

Quick response concealed horizontal sidewall sprinkler January 1, 2011 Sprinkler 63a 1. DESCRIPTION Viking Quick Response Concealed Horizontal Sidewall Sprinkler VK408 is a small solder link and lever spray sprinkler designed for installation on concealed

More information

For mechanical & hydraulic presses Inch & metric taps

For mechanical & hydraulic presses Inch & metric taps www.danly.com TRUSTED SOLUTIONS AND INNOVATION Professional IDT TM In-Die Tapping Catalog For mechanical & hydraulic presses Inch & metric taps www.danly.com Professional IDT TM In-Die Tapping Service

More information

ELECTRONIC KEYCARD ACCESS LOCKS

ELECTRONIC KEYCARD ACCESS LOCKS ELECTRONIC KEYCARD ACCESS LOCKS Presented by Fred A. Crum, AHC,MHS SAFLOK 2608 Manor Oak Drive Valrico, FL 33594 Telephone ~ 813-643-3344 Email ~ fred.crum@saflok.com AUGUST 3, 2005 YESTERDAY WAS MECHANICAL

More information

PRODUCT GUIDE. Home and Commercial Security Hardware. Secure Today, Protect Tomorrow. www.entryarmor.com

PRODUCT GUIDE. Home and Commercial Security Hardware. Secure Today, Protect Tomorrow. www.entryarmor.com PRODUCT GUIDE ecure Today, Protect Tomorrow. Home and Commercial ecurity Hardware www.entryarmor.com April 2010 MARKETING AID mall Counter Displays Large Wall Displays DOOR ECURITY Deters Forced Entry

More information

Installation Instructions 6028.801

Installation Instructions 6028.801 DAZZLE Installation Instructions 08.80 Spread Lavatory Faucet with Speed Connect Drain* Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American

More information

ASCENT TM Integrated Shipment Management

ASCENT TM Integrated Shipment Management ASCENT TM Integrated Shipment Management Software Solutions Production mail Shipping systems Copier systems Facsimile systems Mailing systems Management services Financial services Consulting Supplies

More information

IMPORTANT SAFETY UPDATE

IMPORTANT SAFETY UPDATE J. H. FLETCHER & CO. Box 2187 Huntington, WV 25722-2187 304/525-7811 FAX 304/525-4025 IMPORTANT SAFETY UPDATE INFORMATION BULLETIN NO. 87 TO: FROM: OWNERS OF ROOF DRILLS THAT ARE NOW USING THE DUST BAG

More information

Assembly and Usage Instructions

Assembly and Usage Instructions Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free

More information

Cluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11

Cluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11 Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU

More information

ABLOY VEGA CABINET LOCKS

ABLOY VEGA CABINET LOCKS ABLOY VEGA CABINET LOCKS ABLOY VEGA CABINET LOCKS Modern design. Simplicity in assembling. High level security. Improved usability. All good reasons to choose new ABLOY VEGA. ABLOY VEGA cabinet locks are

More information

These Installation Instructions are valid for antennas in the following version:

These Installation Instructions are valid for antennas in the following version: Installation Instructions 4 ft CompactLine Antennas (with E-Mount 250 km/h) SB, SBX NMT 560-05(e) These Installation Instructions are valid for antennas in the following version: Reflector Ø 1.2 m (4 ft)

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27A PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

Dor-O-Matic Exit Devices

Dor-O-Matic Exit Devices Dor-O-Matic Exit Devices THE FALCON DIFFERENCE S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet local building

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056

More information

T360 Barbecue. Assembly Manual. 85-3052-6 (G30531) Propane 1 YEAR LIMITED WARRANTY

T360 Barbecue. Assembly Manual. 85-3052-6 (G30531) Propane 1 YEAR LIMITED WARRANTY T360 Barbecue Assembly Manual 85-3052-6 (G30531) Propane 1 YEAR LIMITED WARRANTY READ AND SAVE MANUAL FOR FUTURE REFERENCE. If pre-assembled, leave this manual with unit for consumer s future reference.

More information

Panic Exit Devices. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au

Panic Exit Devices. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au Panic Exit Devices We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents 9000/9100 Series 9300/9400 Series 9500/9600 Series 9000/9100 Series Rim Type

More information

What locks do I have Timber Doors

What locks do I have Timber Doors What locks do I have Timber Doors Introduction Locking mechanisms on doors are varied and it can be difficult to judge whether what you have is good, bad or indifferent. This information takes you through

More information

WE ARE UNION. replace with new shot. Mortice Lock Range. ASSA ABLOY, the global leader in door opening solutions

WE ARE UNION. replace with new shot. Mortice Lock Range. ASSA ABLOY, the global leader in door opening solutions WE ARE UNION replace with new shot Mortice Lock Range ASSA ABLOY, the global leader in door opening solutions Contents Introduction 2 Professional range 4-15 StrongBOLT TM Lever Locks 4-5 StrongBOLT TM

More information

No. 57 Receiver Sight No. 57 SML Receiver Sight No. 66 Receiver Sight

No. 57 Receiver Sight No. 57 SML Receiver Sight No. 66 Receiver Sight No. 57 Receiver Sight No. 57 SML Receiver Sight No. 66 Receiver Sight MOUNTING AND ADJUSTING MOUNTING LYMAN NO 57 RECEIVER SIGHT The No. 57 Sight is designed primarily for rifles with round receivers.

More information

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997 Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47

More information

Assembly Instructions Model 1544 Heart-Of-The-Kitchen Island

Assembly Instructions Model 1544 Heart-Of-The-Kitchen Island Assembly Instructions Model 1544 Heart-Of-The-Kitchen Island A. These units are Ready-to-Assemble. Catskill uses positive fastening methods such as wood screws and in some places hidden Bastion fasteners.

More information

SIMPLEX UNICAN LOCKS CHANGING THE CODE / COMBINATION 900 Series 1000 Series L1000 Series LP1000 Series EE1000 Series 2000 Series 2015 Series

SIMPLEX UNICAN LOCKS CHANGING THE CODE / COMBINATION 900 Series 1000 Series L1000 Series LP1000 Series EE1000 Series 2000 Series 2015 Series SIMPLEX UNICAN LOCKS CHANGING THE CODE / COMBINATION 900 Series 1000 Series L1000 Series LP1000 Series EE1000 Series 2000 Series 2015 Series 2400/2500 Series 3000 Series 3100 Series Simplex 5000 Series

More information

HOW TO... Channel Window Balances

HOW TO... Channel Window Balances Take Out Clips Open HOW TO... Channel Window Balances Used On Single Or Double Hung Sash Balance Shown Installed In Jamb With Sash Removed Remove the sash stops. Close sash to expose take-out clips. Open

More information

Router Table Plans. www.bobsplans.com

Router Table Plans. www.bobsplans.com www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly

More information

COASTAL SERIES. 316 Solid Stainless Steel Door Furniture

COASTAL SERIES. 316 Solid Stainless Steel Door Furniture COASTAL SERIES 316 Solid Stainless Steel Door Furniture DORMA COASTAL SERIES SOLID STAINLESS STEEL ROSE AND PLATE DOOR FURNITURE DORMA in Australia and New Zealand is developing into a leading manufacturer

More information

Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...

Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge... Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot

More information

YUASA MILLING MACHINE ACCESSORIES & TOOLS

YUASA MILLING MACHINE ACCESSORIES & TOOLS 97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage

More information

Narrow stile lock 1314

Narrow stile lock 1314 3 2 4 6 6 1 3 2 4 4 5 3 2 4 3 5.... ( (. ). ) 11 12 5 3 5 4 8 1 6 20 8.5 6.5 19 Backset 15 3 5 2 1 5 2 5 5 0 8 9 2 8 1 1 21-1mm 12 8 24 1 6 8 1 ( 9 2 5 ) ) ). ) Narrow stile lock 1314 CE EN 12209 2 4 5

More information

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware

More information

the Company will not warrant ANSI A156.2 Grade 2 lever Product installed in educational facilities and student housing.

the Company will not warrant ANSI A156.2 Grade 2 lever Product installed in educational facilities and student housing. product warranties Commercial Applications Limited Warranty Schlage Lock Company, LLC (the Company ) extends a three year limited warranty to the original user of the products manufactured by the Company

More information

Installation Instructions and Ordering Information

Installation Instructions and Ordering Information The Flush Finish Trimless Door Frame Installation Instructions and Ordering Information CLEAN LINES! The Flush Finish Door Jamb System Manufactured by STUDCO Building Systems Step 1 Verify if you are using

More information

Premier & Deluxe 3-Season Room Sliding Glass Door

Premier & Deluxe 3-Season Room Sliding Glass Door DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen

More information

TS93 EMR T/PT/TDE. Surface applied door closer

TS93 EMR T/PT/TDE. Surface applied door closer TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double

More information

Removable cylinders available for kwik re-keying 2004 REKEYING MANUAL

Removable cylinders available for kwik re-keying 2004 REKEYING MANUAL Removable cylinders available for kwik re-keying 2004 REKEYING MANUAL Rekeying Is A Great Customer Service That s Easy To Learn. When customers buy a new entry lockset, deadbolt or handleset, they also

More information

5300 Series. Description: Grade 1 Heavy Duty Surface Door Closer Ideal for schools, hospitals, and other high-use environments

5300 Series. Description: Grade 1 Heavy Duty Surface Door Closer Ideal for schools, hospitals, and other high-use environments 5300 Series Description: Grade 1 Heavy Duty Surface Door Closer Ideal for schools, hospitals, and other high-use environments Certifications - BHMA Certified ANSI A156.4, adjustable sizes Arms & Brackets

More information

Original Assembly Guide

Original Assembly Guide TCT Multipurpose Single Bevel Sliding Compound Mitre Saw Original Assembly Guide Read instructions before assembling this tool. Table of Contents GB Assembly Guide Read instructions before assembling this

More information

GEH6290. Mechanism Circuit Breaker. Handle Operating Mechanism Cat. No. Type NEMA 1, 3R, 12, 13 NEMA 4/4X Cat. No. Cat. No. Series Instruction

GEH6290. Mechanism Circuit Breaker. Handle Operating Mechanism Cat. No. Type NEMA 1, 3R, 12, 13 NEMA 4/4X Cat. No. Cat. No. Series Instruction GEH6290 g Cable Operator Mechanisms for E150, SE150, SF250, and SG600 Spectra RMS Circuit Breakers Type SCH1/1X, SCH2/2X Flange-Mounted Handle Assemblies, Cable Series SC3L SC10L and Type SC0M1A, SCOM1EF,

More information

IMPORTANT DOCUMENTATION DO NOT DISCARD!

IMPORTANT DOCUMENTATION DO NOT DISCARD! PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance

More information

DIVISION 08 70 00 HARDWARE FORMAT 1. Technical specifications content and numbering system shall be based on 2004 CSI MasterFormat.

DIVISION 08 70 00 HARDWARE FORMAT 1. Technical specifications content and numbering system shall be based on 2004 CSI MasterFormat. FORMAT 1. Technical specifications content and numbering system shall be based on 2004 CSI MasterFormat. BASIS OF DESIGN 1. APSU design standards shall not replace fully developed, project and market specific

More information

Camlocks and Cupboard Locks

Camlocks and Cupboard Locks Camlocks and Cupboard Locks We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents 670 Series Camlocks 692 Pin Tumbler Cupboard Locks 69 Pin Tumbler

More information

M1A/M14 5/8-24 thread adapter Installation Instructions

M1A/M14 5/8-24 thread adapter Installation Instructions - 1 - M1A/M14 5/8-24 thread adapter Installation Instructions Table of contents Table of contents... 1 About the operators manual... 2 Adapter description... 3 Kit contents... 3 Technical specifications...

More information