High Pressure Stainless Steel. In-Line Polypropylene. Gas Line Holder Stainless Steel. In-Line Sanitary Stainless Steel.

Transcription

1 STERLITECH PRESSURE FILTER HOLDERS Pressure type filter holders can be used for ultra cleaning or sterilizing liquids and gases. Sterlitech holders have been designed to maximize flow rates and to minimize holder resistance and can be used in either batch or continuous filtration procedures. Advantages of pressure filtration: Higher differential pressures are possible, resulting in higher flow rates. Minimize downstream contamination Avoid downstream foaming Syringe Stainless Steel High Pressure Stainless Steel In-Line Polypropylene Gas Line Holder Stainless Steel In-Line PFA In-Line Sanitary Stainless Steel For More Information: Call Sterlitech Corporation at (877) or (253) Or visit

2 Vented In-Line Stainless Steel Multi-Media Pressure Sealing Standard Large Stainless Steel Stirred Cells Sanitary Large Stainless Steel Pressure Vessels For more information, please visit the Pressure Filtration section at or us at Sterlitech Corporation th Ave. S. Kent, WA USA Tel: / Fax:

3 Stainless Steel Syringe Holders Sterlitech s Stainless Steel Syringe Holders are ideal for filtering or clearing small amounts of liquid using a syringe with standard Luer fittings. Standard cleaning and sterilizing procedures may be used, including autoclaving with the filter in place. A wrench set is supplied for tightening the holder after assembly. FEATURES AND BENEFITS 304 Stainless Steel Autoclavable Stainless Steel Syringe Holders Luer fittings Wrench set included for easy tightening APPLICATIONS Filter or Clean small volumes of liquid Clarify turbid solutions Purify virus solutions For More Information: Call Sterlitech Corporation at (877) or (253) Or visit

4 SPECIFICATIONS Material 13mm 25mm Body, Support Screens 304 SS 304 SS Gasket PTFE PTFE O-ring PTFE PTFE Connection Inlet LuerLok Outlet Luer slip Dead Volume 0.2 ml 0.4 ml Pressure Inlet 7 kg/cm 2, (100 psi) 7 kg/cm 2, (100 psi) Differential 3 kg/cm 2, (43 psi) 3 kg/cm 2, (43 psi) Membrane Filter Compatibility Filter Size 13mm 25mm Prefilter Size 8mm 21mm Filtration Area 0.2cm 2 3.8cm 2 Dimensions Diameter 16mm (0.6 ) 32mm (1.25 ) 39mm (1.54 ) 36mm (1.42 ) Weight 0.37kg (0.88lb) Ordering Information 13mm 25mm Part Number For more information, please visit the Pressure Filtration section at or us at sales@sterlitech.com. Sterlitech Corporation th Avenue S Kent, WA USA Tel: / Fax:

5 Syringe Celcon Swinney 13 mm Filter Holders The Sterlitech Swinney 13 mm filter holder is excellent for small volume (1-5 ml) particulate removal from fluids dispensed with a syringe. It is used in filtering biofluids, ophthalmics, gas chromatography samples, and lubricants that must be applied dust free to critical parts such as bearings. The holder is resistant to alcohols, esters, ethers, glycols, aromatic hydrocarbons, halogenated hydrocarbons, ketones, oils, photoresists and many other chemicals. Although suitable for most weak acids and bases, we recommend that you test for compatibility with acids and bases. Syringe Celcon Swinney 13 mm Filter Holders APPLICATIONS Biofluids Ophthalmics Gas chromatography samples Lubricants Specifications Materials Body, support screen and seal washer Celon acetal copolymer (CELCON) Filter Size 13mm Prefilter Size 10mm Filtration Area 0.81cm 2 Pressure Rating 2.8 kg/cm 2 (40psi) (maximum) Connections Inlet Luer Lok Outlet Luer Slip Fit Autoclaving 20 minutes at 121 C (250 F) and 15 psi Dimensions 1.6 cm diameter; 3.5 cm long Ordering Information Diameter Item No. Qty. 13mm mm A 1 For More Information: Call Sterlitech Corporation at (877) or (253) Or visit

6 THIS PAGE LEFT INTENTIONALLY BLANK

7 Polypropylene In-line And Aerosol Holders Sterlitech s Polypropylene In-Line Holders are used for ultra-cleaning and sterilizing small volumes of samples under positive pressure. They are also used for aseptic sampling of liquids or gases at point-of-use or when samples must be collected and analyzed on site. FEATURES AND BENEFITS Compatible with a wide range of chemicals and temperatures. Sterlitech Polypropylene In-Line Holders Exterior locking ring design allows the unit to be assembled quickly and efficiently without tearing the membrane. APPLICATIONS Ultraclean and sterilize liquids Aseptic sampling of liquids or gases at point-of-use Environmental air sampling (PPO 47 - Open faced - does not have connections on one side.) For More Information: Call Sterlitech Corporation at (877) or (253) Or visit

8 SPECIFICATIONS Material PP 25 PP 47 PP0 47 Body, Support Screens Polypropylene O-ring (standard) Silicone PTFE Connections 25mm Inlet Female LuerLok Combination ¼ NPTM, Female Luer 25mm Outlet Male Leur slip slip Pressure Inlet 5.0 kg/cm 2 (71 psi) - Differential 3.0 kg/cm 2 (42 psi) 5.0 kg/cm 2 (71 psi) Temperature Maximum 121 C (250 F) Maximum Operating (liquids) 80 C (176 F) Filter Specifications Filter Size 25mm 47mm Prefilter Size 21mm 42mm - Filtration Area 3.5cm cm 2 Recommended Volume <50 ml Up to 1 liter - Dimensions Diameter 30mm (1.2 ) 63.5mm (2.5 ) Height 30mm (1.2 ) 50mm (2.0 ) Weight 0.41oz (12g) per 6 pk/box 1.7oz (47g) Ordering Information PP 25 PP 47 PPO 47 Part Number A For more information, please visit the Pressure Filtration section at or us at sales@sterlitech.com. Sterlitech Corporation th Avenue S Kent, WA USA Tel: / Fax:

9 High Pressure Stainless Steel Holders Sterlitech s High Pressure Stainless Steel Holders may be operated at pressures up to 96.6 bar (1400 psi). Standard Viton O-rings are compatible with many aggressive liquids and gases. FEATURES AND BENEFITS Operate at high pressure, up to 100 kg/cm^2 (1400 psi) Standard Viton O-rings compatible with many aggressive liquids and gases. Back pressure support screen available to prevent membrane rupture and deflect flow at very high pressures. Sterlitech High Pressure Stainless Steel Holder APPLICATIONS Ultraclean and sterilize liquids Aseptic sampling of liquids or gases at point-of-use Environmental air sampling (PPO 47 - Open faced - does not have connections on one side.) For More Information: Call Sterlitech Corporation at (877) or (253) Or visit

10 SPECIFICATIONS Material PP 25 PP 47 PP0 47 Body, Support Screens Polypropylene O-ring (standard) Silicone PTFE Connections 25mm Inlet Female LuerLok Combination ¼ NPTM, Female Luer 25mm Outlet Male Leur slip slip Pressure Inlet 5.0 kg/cm 2 (71 psi) - Differential 3.0 kg/cm 2 (42 psi) 5.0 kg/cm 2 (71 psi) Temperature Maximum 121 C (250 F) Maximum Operating (liquids) 80 C (176 F) Filter Specifications Filter Size 25mm 47mm Prefilter Size 21mm 42mm - Filtration Area 3.5cm cm 2 Recommended Volume <50 ml Up to 1 liter - Dimensions Diameter 30mm (1.2 ) 63.5mm (2.5 ) Height 30mm (1.2 ) 50mm (2.0 ) Weight 0.41oz (12g) per 6 pk/box 1.7oz (47g) Ordering Information PP 25 PP 47 PPO 47 Part Number A For more information, please visit the Pressure Filtration section at or us at sales@sterlitech.com. Sterlitech Corporation th Avenue S Kent, WA USA Tel: / Fax:

11 Stainless Steel Gas Line Holders Sterlitech s Stainless Steel Gas Line Holders are designed for in-line ultracleaning and sterilization of air, gases and compressed gases. Positive sealing is achieved by tightening a female threaded locking ring, allowing for filter changes without removing the holder from its connecting gas lines. Filter support screens on both sides are provided to protect the membrane against reverse pressure surges. Sterlitech Stainless Steel Gas Line Holders FEATURES AND BENEFITS Female threaded locking ring enables filter changes without removing the holder from connecting gas lines. Dual support screens protect the membrane filter from reverse pressure surges and allow forward and reverse flow from either inlet or outlet. APPLICATIONS Ultraclean and sterilize air and other gases including compressed gases. In-line between pressurizing source (pump or gas cylinder) and dispensing vessel. For More Information: Call Sterlitech Corporation at (877) or (253) Or visit

12 SPECIFICATIONS Material LS 25 LS 47 Body, Support Screens, locking ring Type 304 Stainless Steel Gasket PTFE (Teflon) O-rings PTFE (Teflon) Silicone Connections Inlet ¼ NPTF, comes w/ hose barb fitting (3/8 ) Outlet ¼ NPTM, comes w/ hose barb fitting (3/8 ) Pressure Inlet 5 kg/cm 2 (71 psi) Differential 2 kg/cm 2 (28 psi) Filter Specifications Filter Size 25mm 47mm Prefilter Size 25mm 47mm Filtration Area 3.8cm cm 2 Dimensions Diameter 41mm (1 5/8 ) 70mm (2 ¾ ) Height 51mm (2 ) 58mm (2 3/8 ) Weight 0.3 kg (0.63 lb) 0.8 kg (1.75 lb) Ordering Information LS 25 LS 47 Part Number For more information, please visit the Pressure Filtration section at or us at sales@sterlitech.com. Sterlitech Corporation th Avenue S Kent, WA USA Tel: / Fax: