Small service sector and SoHo solutions

Transcription

1 Small service sector and SoHo solutions Contents Minirep and Microrep concepts...88 Minirep TM system...90 Microrep TM system...94 Splitters

2 Small service and SoHo Minirep High performance and simplicity A complete solution designed for the small service-company sector, Minirep is particularly adapted to installations of less than 50 outlets. Simple, modular, the Minirep range offers data, voice and fiber solutions in a wide variety of configurations. Minirep is the ideal solution when technical premises All categories Cat. 5 FTP (7700 SD) Cat. 5 UTP (7700 SU) Cat shielded FTP (7700 GE) All media types Cat. 6 UTP (7700 GU) RJ45 data connectors voice/rj45 module 5Entirely flexible and adaptable Designed for SOHO, the Minirep system is adaptable, powerful and very easy to implement. Modular to meet users needs, the Minirep product range 5A flexible 1/3 makes it possible to offer a suitable solution for each installation. The whole range is upgradeable, from Microrep to Minirep and from Minirep to 19. 5Upgradable to the 19 format 2/3 concept > Side brackets adapt > Freedom and flexibility the Minirep onto 19 cabinets. for installers. > Sized to the exact required use. 36 0m m 1U 85m m 5A complete range for building a tailored distribution frame Copper data 88 Copper data V Data + voice 230 V 8-pair modules Fiber Optic Shelves

3 sector solutions are small or inexistent. Ultra-compact, the Micro rep range was designed for the 4- to 16-outlet s e rvice sector and SoHo installations. Compact and aesthetically pleasing, Minirep and Microrep fit perfectly into the workspace. Microrep soho Ultra-compact and modular 5 Concept Thanks to its modular front, Microrep suits any need. 1/2 1/2 This micro distribution frame provides the Minirep functionalities in an extra small design. Its modular concept enables it to be adapted to the required configuration. White, it fits discretely into any workspace. Fiber Optic 8-pair modules 5 5 Small systems: freedom to evolve Mounted on adaptable supports, the splitters make it possible to use 2 applications on one RJ45 outlet. Simple to implement All Minirep solutions are shipped complete and ready to install, with a single reference, simplifying installation site preparation. The distribution frame is built by simply assembling the reps and fixing then directly onto the wall. Thanks to its compact dimensions it does not have to be installed in technical premises, and its design is fitting for service-sector buildings. It can be extended by adding reps to the existing distribution frame. Fixes straight onto a wall. Click-on front Connector wiring and installation. 5 A solution for each active equipment format The Minirep and Micro rep active equipment supports are designed to integrate mini active equipment. Minirep can also accommodate active equipment in 19 format. 89

4 Minirep TM system Each Minirep TM is shipped as a pack containing connectors, connector supports, identification labels, screwing kit and assembly instructions. RJ45 Minirep Easy to open 12 RJ45 ports Recommended cables: Category 5: ABC Lan and epower MNC. Category 6: ABC Lan and GigaCross MNC. 1U A Cat. 5 FTP Cat. 5 UTP Cat. 6 Shielded Cat. 6 UTP Description Colour Pckg Reference Reference Reference Reference Non-adaptable White 1 A A A A Adaptable White 1 A A A A Adaptable Blue 1 A A A A RJ45 ports + patchcord guide The patchcord-guide position can be adjusted on the right or left side of the panel. Cat. 5 FTP Cat. 5 UTP Cat. 6 Shielded Cat. 6 UTP A Description Colour Pckg Reference Reference Reference Reference Non-adaptable White 1 A A A A Adaptable White 1 A A A A Adaptable Blue 1 A A A A RJ45 ports + 2 Power sockets on a connection block Saves time on installation site: French NF standard domestic plugs on screw-down connection block. Right or left position with the 2-thirds, 1-third system. Connection with a 230 V cable: 3 x 2.5mm 2 or 3 x 1.5mm 2. Cat. 5 FTP Cat. 6 Shielded A-26122/1 Description Colour Packaging Reference Reference Non-adaptable White 1 A-26022/1 A-28022/1 Adaptable White 1 A-26122/1 A-28122/1 8 RJ Power sockets with power cable 3 x 1.5mm 2, 3 m 230 V cable + French NF standard domestic plug. A-26122/2 Cat. 5 FTP Cat. 6 Shielded Description Colour Packaging Reference Reference Non-adaptable White 1 A-26022/2 A-28022/2 Adaptable White 1 A-26122/2 A-28122/2 90

5 Minirep TM system Voice Minirep 12-port RJ45 voice module 1 A-29012EX 24-port RJ45 voice + patchcord guide 1 A A-29012EX RJ45 sockets that can be allocated 3-6/4-5. Connection onto a single IDC contact bar, at the rear, with tool ref Accommodates 0.4 to 0.8mm diameter wires with a 1.2mm max diameter on insulation. A Fiber optic Minirep 8 fiber optic ports + patchcord guide Accepts ST, SC Duplex, MTRJ and LC Duplex connectors. Max. capacity: 8 ST, 4 Duplex SC, 4 MTRJ, 4 Duplex LC. Integrated coiling system. Connectors and couplers not included (see references page 61). A Description Capacity Packaging Reference FO Minirep 8 fibres 1 A V 2P + T Minirep 5 or 6 wired sockets (FRENCH NF STANDARD or Schuko) Compliant to French standard NFC Compliant to Schuko standard (Germany and Spain). Rear contacts protected by covers. White (RAL 9010) polycarbonate body. NF Schuko A Description Pckg Reference Reference 6 PSs connected to 3m cable 1 A A-21132S 6 PSs connected to screw-down connection block 1 A A-21133S 5 PSs cabled on connection block with light switch 1 A A-21145S A

6 Minirep system Compact 8-pair IBCS to IDC module support A Includes: Minirep support, 6 IDC modules, side label holders, labels and screwing kit. Cat. 5, 8-pair modules, compliant with EN and ISO standards. Single, IDC that accommodate 0.4mm to 0.8mm diameter wires. Side pin for connecting Drain wires. 3U 135 mm Description Colour Packaging Reference 6 modules Yellow 1 A modules Green 1 A Compatible with side (Ref. 1039), 4 and 8 pairs rotating (Ref. 1038x) label holders. Used with IBCS Compact patchcords or CI patchcords. Channeled pair wire routing on cable and jumper side. Side label holder IDC connection tool Wiring code EIA/TIA 568 B Module 100Ω cable RJ T ==== Drain wire ==== T Minirep Accessories Minirep extension element 1 A Minirep patchcord guide 1 A adaptation kit for Minirep (Brackets + rings) 1 A Grounding kit for 5 Minirep and Microrep 1 A x 25mm screw-down block 1 A Ergonomic patchcord guide for vertical and horizontal guiding. A Extension element: 2-thirds 1-third modular A A

7 Minirep system Shelves 360mm A-21201/ mm Shelves for network mini active equipment 2U shelf, depth 170mm 1 A U shelf, depth 300mm 1 A-21201/001 2U 300mm-deep shelf: 300mm 2U 170mm A Only used with 300mm depth cover. (ref. A-203XXPAH). > Integrated cable routing. Supports for 19 active equipment 1.5U support 1 A U support 1 A Left/right reversible support. Shipped with bolts and screws. A U 495mm > Feathered. 300mm 3U = 160mm 1,5U = 90mm > Cover impossible. > Compatible with 300mm depth cover. Minirep covers 365mm 365mm Plain 240mm-depth / no door 4U cover 1 A U cover 1 A mm-depth glass door 8U 8U 4U cover 1 A-20300PA 8U cover 1 A-20301PA 240mm 300mm A A-20301PAH 300mm-depth glass door 8U cover 1 A-20301PAH 14U cover 1 A-20312PAH Accessories Cover grounding kit 1 A U 4U Covers shipped in flat packs. Quick no-screw tool-less assembly. Right or left door opening. Divisible sides for cable entry. 300mm A-20312PAH 240mm A-20300PA Overall cover height U number Height (mm)

8 Microrep system RJ45 Microrep 8 RJ45 ports Cat. 5 FTP RJ45 keystones. White faceplates. A-26112M 230 V 2P + T Microrep Non-adaptable 1 A-26012M Adaptable 1 A-26112M 2 PSs on connection block + patchcord guide Connection with a 230V cable: 3 x 2.5mm or 3 x 1.5mm. French NF-standard sockets. 2 pre-wired PSs on connection block + patchcord guide 1 A-21133M A-21133M > For easy access, place the 230 V Microrep under the shelf. Microrep Voice 12 RJ45 voice ports + patchcord guide 12 RJ45 voice ports + patchcord guide 1 A-29012M A-29012M 12 RJ45 ports that can be allocated 3-6/4-5. Connection at the rear onto a single IDC bar using tool ref Accommodates 0.4 to 0.8mm diameter wire, with a max. diameter of 1.2mm on insulation. Extensible to 24 RJ45 with the A-29012EX voice module. 1-third extension Voice extension: see page 91. Shelf 240mm Horizontal shelf 1U shelf, depth 135mm 1 A-21201M 1U A-21201M 135mm Microrep cover 245mm Single 190mm-depth unit No door fitted with glazed window. 290mm A-20306MA White 6U micro cover with glazed inspection window 1 A-20306MA 190mm 94

9 S p l i t t e r s Minirep and Minirep splitters B Splitters make it possible to use several applications at the same time on the same RJ45 outlet. They give installations great flexibility of use by optimising their density. They must be used throughout the connection link: on the distribution frame and at the workstation (see Table of correspondence below). Distribution frame Workstation Width 22.5mm 45mm 22,5mm 7864/ stations Ethernet Description Reference Reference Reference 2 Ethernet B 7864 E t h e rnet + Te l e p h o n e Token Ring B digital tel analogue tel // RJ Specific splitters and 4-way splitters One 4-wire digital telephone + 1 Ethernet workstation 7874/ Description Format (mm) Reference 2 // digital telephones 22.5x45 A Digital tel. (R=100 Ω) + analogue tel. 45x45 A-60900B 2 // digital tel. (R=100 Ω) 45x45 A digital tel. (R=100 Ω) 45x45 A-60911B 2 // digital tel. (R=100 Ω) + 2 analogue. tel. 45x45 A Ethernet + 2 analogue tel. + 1 analogue tel. in // 45x45 A-60942B Ethernet + 2 digital tel. (R=100 Ω) in // 45x45 A Two 4-wire digital telephones 2 Ethernet 7544B Insert A Insert B Token Ring 7561B Insert A Insert B Table of correspondence 45 x 45mm splitters Previous range 2005 range A A B A-41412B 7544B A B A A-60902B 7570 A-60903B 7576 A EIA/TIA 568 B wiring code Ethernet + Telephone Insert A Insert B RJ45 in // Insert A Insert B x 45mm splitters Previous range 2005 range A A A A-61802B 7870 A A digital tel Insert A Insert B analogue tel Insert A Insert B Adapter A m circuit-closer adapter cable, 6 pins (1.3)/RJ45 (4.5) 1 A Ohms-bus pad 1 A

10 96