ELECTRICAL AND PNEUMATIC WASTE OIL SUCTION SYSTEMS

Transcription

1 EECTRICA AND PNEUMATIC ASTE OI SUCTION SYSTEMS The sucked waste oil is collected first in an intermediary collection container. Once the intermediary collection container is full, the waste oil is transferred automatically through a pneumatic system into a waste oil storage tank. suction, eventually also possible at a distance of max. 10 m by using a hose reel. The centralized waste oil suction unit transfers the oil automatically into a waste oil storage tank; therefore an overflow protection device (f. ex. art. no. 8309) must be installed at the tank which stops the oil flow when the preset maximum level of the tank has been reached. Automatic emptying by means of -operated system of the auxiliary tank and transfer into wasted oil-tank. The centralized waste oil suction unit has the following advantages: 1) Automatic creation of vacuum in the intermediary collection container and automatic discharge of the waste oil once this container is full into a waste oil storage tank. Thus, the unit is always ready for an immediate use, because the cycles of creating the vacuum in the container and those of its discharge are made automatically without any need of an intervention by the user such as necessary in similar suction systems. 2) The system also allows a suction at a certain distance if it is connected to a hose reel with a max. 10 m hose. 3) The encased unit can be installed at the wall which helps to improve the use of the available space in the workshop. 4) The waste oil suction unit art. no has been designed to be used in more than one working place, but in different locations in the workshop, using always the same pipework leading to the waste oil storage tank Safety kit for waste oil suction units, composed of pneumatic solenoid valve and electronical switchboard to ensure the hermetic closure of the waste oil discharge pipework in order to avoid any eventual backflow of the waste oil when various units are used simultaneously. Page 133

2 STATIONARY PNEUMATIC ASTE OI SUCTION SYSTEMS Pneumatic, wall-mounted pumps for the suction of waste oil by means of suitable suction probes. Particularly suitable in installations with centralized pipework for the suction of waste fluids and the distribution of new fluids all-mounted waste oil suction system, consisting of 1:1 - pneumatic piston pump, kit of suction probes in different diameters and suction adapters, 3 m - suction hose with shut-off valve and connections, vacuometer for the control of the suction process and 1,6 m - discharge hose with curved outlet tube. On demand alternatively also a discharge hose with suitable connection to a pipework can be supplied Noise insulating cabinet for wall-mounted pneumatic pumps vacuum Pressure Compression Outlet pressure eight ,8 bar 1-4 bar 1:1 140 l/min 4 bar 11 Kg 3199 all-mounted waste oil suction system, consisting of 1:1 - pneumatic piston pump, pressure regulator with manometer and condensation water separator, art. no. 7180, kit of suction probes in different diameters and suction adapters, automatic open hose reel, art. no. 9016, with 10 m rubber suction hose in 1/2 with shut-off valve and connections, vacuometer for the control of the suction process, 2 m - connection hose to the pump and 1,6 m - discharge hose with curved outlet tube. On demand alternatively also a discharge hose with suitable connection to a pipework can be supplied vacuum Pressure Compression Outlet pressure eight ,8 bar 1-4 bar 1:1 140 l/min 4 bar 32 Kg Page 134

3 STATIONARY PNEUMATIC ASTE OI SUCTION SYSTEMS 3172 suction system such as art. no. 3099, but mounted on a heavy duty trolley, consisting of 1:1 - pneumatic piston pump, kit of suction probes in different diameters and suction adapters, 3 m - suction hose with shut-off valve and connections, vacuometer for the control of the suction process and 1,6 m - discharge hose with curved outlet tube. On demand alternatively also a discharge hose with suitable connection to a pipework can be supplied vacuum Pressure Compression Outlet pressure eight ,8 bar 1-4 bar 1:1 140 l/min 4 bar 42 Kg 790x900x all-mounted waste oil suction system, consisting of 1,5:1 - pneumatic piston pump, series Power Bull, pressure regulator with manometer and condensation water separator, art. no. 7180/12, kit of suction probes in different diameters and suction adapters, automatic encased hose reel, art. no. 9013, with 8 m rubber suction hose in 3/4 with shut-off valve and connections, vacuometer for the control of the suction process, 2 m - connection hose to the pump and 1,6 m - discharge hose with curved outlet tube. On demand alternatively also a discharge hose with suitable connection to a pipework can be supplied. Due to the elevated capacity of this Power Bull series pump besides of waste oil also other liquids such as antifreeze, diesel, hydraulic oil and similar can be sucked in very short time and can be transferred also at long distances vacuum Pressure Compression Outlet pressure eight ,8 bar 1-4 bar 1,5:1 960 l/min 6 bar 44 Kg Page 135

4 PNEUMATIC PUMPS FOR TE ASTE OI EVACUATION and waste antifreeze evacuation kit, consisting of a 1:1 (art. no. 2047) or a 2:1 (art. no. 2046) pneumatic piston pump with Viton - O-ring gaskets, wall bracket, 1,5 m - rubber suction hose ø 1 and foot valve with stainless steel strainer Pneumatic 1:1 - evacuation piston pump with Viton - O-ring gaskets, suitable for the evacuation of waste oil and waste antifreeze. Delivery approx. 35 l/min Kit for waste oil and waste antifreeze evacuation, consisting of hydraulic quick coupling with connection 1 BSP (F), hydraulic quick connector with connection 1 BSP (F) and connection adapter with connection 1 BSP (MM), with nonreturn valve. The kit is necessary to carry out the evacuation of waste oil drainers or waste oil suction units by connecting the hydraulic quick coupling to the suction hose of evacuations kits art. no or art. no (instead of the installed foot valve) and the quick connector to the waste oil drainer or waste oil suction unit to be discharged. OPTIONA 2264 Compressed supply Delivery Compression outlet pressure Connection Connection lubricant outlet eight bar 30 l/min 2:1 16 bar 1/4 BSP (F) 3/4 BSP (M) 240 l/min 5 kg bar 35 l/min 1:1 8 bar 1/4 BSP (F) 3/4 BSP (M) 210 l/min 4 kg bar 35 l/min 1:1 8 bar 1/4 BSP (F) 3/4 BSP (M) 210 l/min 4 kg 3096 igh delivery waste oil and waste antifreeze evacuation kit, consisting of a 1:1 pneumatic piston pump, series Power Bull, with Viton - O-ring gaskets, wall bracket, 1,5 m - rubber suction hose ø 2 and pressure regulator with manometer and condensation water separator, ø 1/ Compressed supply Delivery Compression outlet pressure Connection Connection lubricant outlet eight bar 120 l/min 1,5 : 1 12 bar 1/2 BSP (F) 1 BSP (M) 1920 l/min 25 kg Page 136

5 ASTE OI TREATMENT ACCESSORIES Complete kit of 5 suction probes of different diameters and lengths and 2 suction adapters, with plastic probes holder Flexible suction probe, ø 5 mm, length 800 mm. Flexible suction probe, ø 6 mm, length 800 mm. Flexible suction probe, ø 7 mm, length 1500 mm. 2997/20 Flexible suction probe, ø 7 mm, length 2000 mm Flexible suction probe, ø 8 mm, length 800 mm Rigid suction probe, ø 6 mm, length 800 mm Suction adapter for Volkswagen vehicles Suction adapter for Mercedes vehicles Plastic drain pan for the collection of waste oil and for the use as a parts cleaner; capacity 8 l, includes handle and draining spout Plastic drain pan for the collection of waste oil and for the use as a parts cleaner; capacity 16 l, includes handle and draining spout Plastic can for the collection of waste oil, capacity 8 l, with hermetical screw cap which allows transport and emptying Oil absorbent roll, suitable for covering big surfaces. It can easily be cut into the required form and can also be used for absorbing in case of big clean-ups or for reasons of precaution in risk zones where leakages could happen. : 40 cm x 26 m. Absorbency per roll: 117 l. eight: 6 kg Oil absorbent mat pads, suitable in case of accidental leaks and spills. Packed in a dispenser box to guarantee a quick and easy access. The mat pads can also be used for take off small spills or to clean parts and machinery. : 400 x 520 mm. Packaging: in dispenser box of 100 pads. Absorbency per dispenser box: 142 l. eight: 6,4 kg. Page 137

6 ASTE OI STORAGE TANKS AND ACCESSORIES aste fluids storage tanks, made in plastic or in steel, compliant with the valid norms regulating the storage of waste fluids (Italian directive 392/96 according to European directives 75/349 EEC and 87/101 EEC l l l storage tank, with double wall in polyethylene (one internal in contact with the oil and one external which serves as a spill containment and security container for the internal one). The tank is equipped with a wide dome with raisable cover. In its interior there is a removable basket for the drain of oil filters and the opening for charging and discharging the tank. At the rim of the dome a mechanical level gauge is installed that permits the control of the filling level and a transparent indicator on the side of the external tank allows to detect eventual leakages of the internal tank immediately. The tank is available in different colours for the storage of different liquids, such as mineral oils, vegetable oils, break fluid, oil-based emulsions or antifreeze l l l Capacity eight l 26 kg 820x820x l 23 kg 800x800x l 37 kg 960x960x Storage tank for the external use, made of first class carbon steel, equipped with: - spill containment tray in painted steel with a collection capacity of 100 % of the tank content, - stable, anti-slip tray base, - dome with ø 400 mm, including connections, - external finishing with anti-rust priming and gloss finish. OPTIONA Galvanized porch roof. Art. no 8218/ / / / Capacity (m³ - l) 1, , , External diameter storage tank (mm) Ø 950 Ø 1100 Ø 1100 Ø 1430 Total length (mm) idth spill containment tray (mm) ength spill containment tray (mm) eight spill containment tray (mm) Page 138

7 ASTE OI STORAGE TANKS AND ACCESSORIES 8217 Double wall tank, external tank in galvanized steel and internal tank in high density polyethylene, suitable for the storage of waste oil. Including 4 connections in 2 on top of the tank, mechanical level indicator, optical leakage detector for eventual leakages in the internal tank, carrying handles and pallet feet for the lifting and the transport with a pallet truck or a forklift from 4 sides. Approved for indoor installations. Capacity eight 8217/ l 55 Kg 700x730x / l 82 Kg 770x980x / l 110 Kg 770x1280x / l 165 Kg 770x1630x1870 Kit 8307 Overfill protection kit for waste oil, stops the oil flow immediately when the maximum filling level in a tank has been reached. The kit is composed of: - high level probe, with connection M 3/4 BSP and length 300 mm, art. no. 8905; - warning light with horn, art. no. 8920; - solenoid-actuated oil flow shut-off valve, with connection 1 BSP (M), art. no. 7365; - electronical control switch; - transformer / stabilizer 230 VAC 24 VDC, art. no Kit 8307 Page 139

8 PNEUMATIC BRAKE BEEDERS Pneumatic brake bleeding unit with two chambers which are hermetically separated by an elastic diaphragm. One chamber of the container contains the brake fluid, the other chamber serves as reservoir for the. working pressure 2 bar. The diaphragm permits to separate the brake fluid and the, avoiding like that the risk of an emulsion Pneumatic brake bleeding unit, with pressure regulator, 3 m spiral fluid supply hose, universal bleeding adapters, art. no. 3481, for the bleeding of brakes and clutches, including those with ABS. Container capacity: 9 l The unit includes also the following accessories: - 2 plastic jerrycans for the collection of the brake fluid, art. no. 3485, - 2 plastic bleeding hoses, art. no. 3481, - 1 plastic funnel, art. no eight ,5 Kg 270x340x Mobile brake bleeding unit, consisting of: - trolley with 4 castors, art. no. 4357, - pneumatic brake bleeding unit, art. no. 3406, - kit of bleeding adapters for passenger cars and trucks, art. no plastic jerrycans for the collection of the brake fluid, art. no. 3485, - 2 plastic bleeding hoses, art. no. 3481, - 1 plastic funnel, art. no Page 140 eight Kg 500x610x1130

9 PNEUMATIC BRAKE BEEDERS 3491 Technical data bleeding adapters Kit of brake bleeding adapters, suitable for the most popular passenger cars (does not include universal bleeding adapter), consisting of: Art. nos Pos. Ext. Ø mm mm ,5 mm mm mm mm mm mm mm mm mm mm Kit of brake bleeding adapters, suitable for various passenger cars and trucks, consisting of: Art. nos Technical data bleeding adapters Pos. Ext. Ø mm mm mm mm mm mm mm mm 3493 Complete kit, consisting of all 24 brake bleeding adapters, suitable for passenger cars and trucks, including also universal brake bleeding adapter mm ,5 mm 3474 Universal screw brake bleeding adapter, suitable for the use in most of the existing passenger cars and trucks Page 141