TECHNICAL SHEET RELATED TO DRAWN PRODUCTS OBTAINED BY A RECOVERY PROCESS OF ECO LIFE SRL ECOLOGICAL DRAWN PRODUCTS

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "TECHNICAL SHEET RELATED TO DRAWN PRODUCTS OBTAINED BY A RECOVERY PROCESS OF ECO LIFE SRL ECOLOGICAL DRAWN PRODUCTS"

Transcription

1 TECHNICAL SHEET RELATED TO DRAWN PRODUCTS OBTAINED BY A RECOVERY PROCESS OF ECO LIFE SRL ECOLOGICAL DRAWN PRODUCTS deriving from post-consuming waste sorting of solid urban waste

2 TECNICAL PRODUCT SHEET Introduction The ecological drawn products deriving from post-consuming waste sorting of solid urban waste are composed for 85% of polyethylene and Polypropylene, while the remaining 15% is composed of other parts (paper, tissue, metal, aluminum, etc). Up to today the bigger part of this collected waste is destined to go to the dump of to be used in energy recovery. Eco Life on the contrary, entirely recycles the mixed plastic waste and transforms it in a finished product which is used in many product sectors (building industry, infrastructure, construction, furniture). Illustration of the types of materials entering the producing process The prime material used for the production of the heterogeneous drawn products is produced by Eco Life using a innovative and technological advanced process, where the plastic waste is processed in order to generate dense chips.

3 The prime material, which has been inserted in the productive preparation cycle, derives from selection operations of the dry waste parts collection and from the comparable urban wastes, both made of plastic materials: - HDPE; - LDPE; - PP; - PS; - Steel - Aluminium - Cellulose material (paper and tissue) The typical average composition of the materials in entrance is similar to the outgoing product, except for the iron metals which are automatically selected during the process, since they don t have chemical or other transformations during the production cycle. Synthetical description of the production process The production process for the production of the plastic drawn products consists of the following phases:

4 Loading plastic waste on the system Waste grinding Iron removal Densification, using mechanical rubbing ( C ) Cooling down in the rotary press Cooling down on the conveyor belt Grinding of the dense chips Continuous extrusion of drawn products Cutting of the drawn products Drawn products characteristics The technical characteristics of the recycled drawn products stand out for the mechanical resistance, the duration in time and the absence of maintenance interventions, which makes the product extremely interesting for external use where it gets most in contact with the atmospherical elements. The possible colouring is normally done in big lots with natural oxides. It is, however, possible to carry out a successive automatic application of a pellicle of any colour and with any esthetical effect ( wood effect, marble effect ecc ) The recycled plastic drawn products can be fixed with nails or wood screws. Also the workability (cutting, milling, etc.) proves to be extremely easy and efficient with tools adapted to wood working. The drawn product has the following characteristics: Non - toxic Easy workability Resistance to the atmospherical elements Colour constancy throughout time High resistance to saline mist Unassailableness of bacteria, mushrooms and moulds Resistance to compression High electrical isolation

5 Technical drawings

6

7

8

IWR Integrated Waste Recycling. Integrated System for treatment and recycling of Municipal Solid Waste

IWR Integrated Waste Recycling. Integrated System for treatment and recycling of Municipal Solid Waste IWR Integrated Waste Recycling Integrated System for treatment and recycling of Municipal Solid Waste 1 1. Introduction IWR is an integrated system, realised by different Italian companies, manufacturers

More information

Processing of Non- Metals Dr. Inderdeep Singh Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee

Processing of Non- Metals Dr. Inderdeep Singh Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee Processing of Non- Metals Dr. Inderdeep Singh Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee Module - 4 Plastics: properties and processing Lecture - 7 Rotational

More information

Types of Packaging Materials

Types of Packaging Materials Types of Packaging Materials Syllabus Link: Packaging Sometimes manufacturers use combination packages to contain their products. Combination packages consist of two or more separate packaging materials.

More information

Separating Plastics by Density

Separating Plastics by Density Separating Plastics by Density Introduction: When plastics are recycled it is particularly important that they are separated by type. The numbers on recyclable plastics help this process along, but on

More information

Installation Guide for Domestic Decking in Recycled Plastic

Installation Guide for Domestic Decking in Recycled Plastic Daisy Mill (Gate 3), Unit B Daisy Street, Waterside Colne, Lancashire, BB8 8ER T: 01282 861325 E: sales@kedeltrade.co.uk W: www.kedeltrade.co.uk Installation Guide for Domestic Decking in Recycled Plastic

More information

Transformations with Recycled Plastic

Transformations with Recycled Plastic Uniclass L441:P71 CI/SfB (90.3) Xn6 Transformations with Recycled Plastic Recycled Plastic Fencing: The long-life maintenance free fencing Durable & vandal proof No maintenance Attractive & versatile appearance

More information

5. DIMENSIONS, TOLERANCES AND SURFACE. 5.1 Dimension, Tolerances and Related Attributes 5.2 Surfaces 5.3 Effect of Manufacturing Processes

5. DIMENSIONS, TOLERANCES AND SURFACE. 5.1 Dimension, Tolerances and Related Attributes 5.2 Surfaces 5.3 Effect of Manufacturing Processes 5. DIMENSIONS, TOLERANCES AND SURFACE 5.1 Dimension, Tolerances and Related Attributes 5.2 Surfaces 5.3 Effect of Manufacturing Processes Introduction Dimensions the sizes and geometric features of a component

More information

SORTING PLASTICS FOR RECYCLING INTRODUCTION

SORTING PLASTICS FOR RECYCLING INTRODUCTION SORTING PLASTICS FOR RECYCLING INTRODUCTION Description Students use the difference in densities of polymers and flame tests as a basis for the development of a scheme to separate plastics. Goals for This

More information

Pinta EQ Environmental impact assessment MRK/ 4-5-2010 Page 1(6) 2 Description and assessment of the Production process

Pinta EQ Environmental impact assessment MRK/ 4-5-2010 Page 1(6) 2 Description and assessment of the Production process Page 1(6) Pinta EQ 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods

More information

Teacher Notes on Explain: Why Do They Float and Sink?

Teacher Notes on Explain: Why Do They Float and Sink? Teacher Notes on Explain: Why Do They Float and Sink? Purpose: To help students understand the concept of floating and sinking using solutions of different density. Students in grades 5 and 6 may need

More information

General Recycling Information

General Recycling Information General Recycling Information HOUSEHOLD RECYCLING The four main materials collected in a mixed bin collection system, usually either a blue or green bin are- PAPER FOOD AND DRINK CANS CARDBOARD PLASTIC

More information

THE MANUFACTURE OF POLYETHYLENE

THE MANUFACTURE OF POLYETHYLENE THE MANUFACTURE OF POLYETHYLENE Three classes of polyethylene are imported into New Zealand for extruding into a wide variety of products. These are low density polyethylene (LDPE), high density polyethylene

More information

RECYCLING EQUIPMENT & MACHINERY COSTRUZIONI MECCANICHE IMPIANTI INDUSTRIALI

RECYCLING EQUIPMENT & MACHINERY COSTRUZIONI MECCANICHE IMPIANTI INDUSTRIALI COMPANY PRESENTATION 1 Since 1976, the year of foundation, TECNOFER designs and builds plants for the regeneration of plastic films in LDPE, LLDPE, HDPE, PP and of bottles and other containers in HDPE-PP,

More information

Plastics: An Energy-Efficient Choice

Plastics: An Energy-Efficient Choice Plastics: An Energy-Efficient Choice Introduction Plastics are derived from petroleum and natural gas. With increased public awareness and concern about waste and energy issues, some have questioned whether

More information

LIGHT, SAFE & RECYCLABLE

LIGHT, SAFE & RECYCLABLE LIGHT, SAFE & RECYCLABLE Your PET plastic egg carton is environmentally friendly. Not only is it recyclable but it contains recycled PET plastic, the same plastic used to manufacture plastic bottles and

More information

+91-8071676053 Rukmani Non- Ferrous Industries http://www.rukmaninonferrouscasting.com/ We are manufacturer and exporter of Non-Ferrous Dies & Castings. The offered range of products is highly acknowledged

More information

Pallet Management and Waste Reduction

Pallet Management and Waste Reduction Pallet Management and Waste Reduction The National Wooden Pallet and Container Association states, "Pallets move the world." Pallets, particularly wooden pallets, are the basic units used to transport

More information

PET (Polyethylene Terephthalate, Resin Identification Code #1) PET Bottles (Carbonated Beverage, Water, and Custom Bottles)

PET (Polyethylene Terephthalate, Resin Identification Code #1) PET Bottles (Carbonated Beverage, Water, and Custom Bottles) PET (Polyethylene Terephthalate, Resin Identification Code #1) Highlights Non-PET package parts labels, closures, attachments should float in water Confirm adhesives used with pressure sensitive labels

More information

Structural Plastic Adhesives DP8010 Blue. Preliminary Product Data Sheet Date: February 2015 Supersedes: New. room temperature cure

Structural Plastic Adhesives DP8010 Blue. Preliminary Product Data Sheet Date: February 2015 Supersedes: New. room temperature cure Scotch-Weld TM Structural Plastic Adhesives DP8010 Blue Preliminary Product Data Sheet Date: Supersedes: New Product Description 3M Scotch-Weld Structural Plastic Adhesives DP8010 Blue is a two-part, acrylic-based

More information

APR Design for Recyclability Guidelines Section Excerpt

APR Design for Recyclability Guidelines Section Excerpt APR Design for Recyclability Guidelines Section Excerpt Please note: This is only one section excerpted from the Guidelines. The text of the entire document can be found elsewhere on the APR Website. PET

More information

PATHFINDER SYSTEMS AUSTRALIA ARCHITECTUAL - COMMERICAL

PATHFINDER SYSTEMS AUSTRALIA ARCHITECTUAL - COMMERICAL PATHFINDER SYSTEMS AUSTRALIA ARCHITECTUAL - COMMERICAL STYLISH EFFECTIVE SAFE Immediate solutions to improving safety and compliance. Pathfinder Systems Australia have gained experience in supplying quality

More information

EUROTUBO DELTALAB 6. SWABS

EUROTUBO DELTALAB 6. SWABS 92 93 94 The swab, sterile or non sterile, is used for biological sample collection. Specially used for processing samples which, after being coloured, will be analysed by microscopy. Also suitable for

More information

Physics and Chemistry to integrate Economics and Ecology : Recycling and Reuse of Waste. Rajeev Pandia

Physics and Chemistry to integrate Economics and Ecology : Recycling and Reuse of Waste. Rajeev Pandia Physics and Chemistry to integrate Economics and Ecology : Recycling and Reuse of Waste Rajeev Pandia Contents (Rubber) Global Challenges of End Of Life Tires Approaches for addressing the challenge Reclaim

More information

Pellet Process - Uses and Exposures

Pellet Process - Uses and Exposures Pellet Process - Uses and Exposures 1 PROCESS - MANUFACTURING & USES 1 1.1 Manufacturing of pellets 2 Pellets are formed from the raw materials fine ores and additives of < 0.05 mm - into 9-16 mm spheres

More information

Chopsticks. The gentle touch is the result of the wood fibres that make it unlike any other plastics. Mika Ihanus

Chopsticks. The gentle touch is the result of the wood fibres that make it unlike any other plastics. Mika Ihanus The gentle touch is the result of the wood fibres that make it unlike any other plastics. Chopsticks Mika Ihanus I developed the chopsticks in 2006 and thanks to UPM ForMi I was able to go ahead with my

More information

Dam-P 868 designed by DebiLab. 0,30 m 3 13,5 kg 12,5 kg 180 cm. Dimensions (cm) Materials, properties and details

Dam-P 868 designed by DebiLab. 0,30 m 3 13,5 kg 12,5 kg 180 cm. Dimensions (cm) Materials, properties and details Dam-P 868 designed by DebiLab 0,30 m 3 13,5 kg 12,5 kg 180 cm Armchair with 4-legs metal frame, seat End : armchair for home and contract suitable to furnish: home, boardroom, break-out area, waiting room,

More information

Technology Design Task

Technology Design Task Technology Design Task -Artefact Production- Design Task Artefact A number of factors can be considered in influencing the extent to which the completed artefact fully satisfies the chosen design brief

More information

SAMI Microstar (SAMI MM, MD, MS)

SAMI Microstar (SAMI MM, MD, MS) 1 ABB Oy 18.2.2000 Product Support TLC/Ari Niskanen SAMI Microstar (SAMI MM, MD, MS) Recycling information for drive of type SAMI Microstar Table of contents TABLE OF CONTENTS...1 1. INTRODUCTION...2 2.

More information

Microwave absorbing tiles:

Microwave absorbing tiles: On the basis of the results obtained from the first project activities, the grinding conditions on a larger scale were determined. As regards the sintering, an adjustment has been made to the roller furnaces

More information

Sustainable Purchasing Guide Promotional Items

Sustainable Purchasing Guide Promotional Items Promotional Items Promotional Items Introduction This section provides information on currently available promotional item options that can help to move the University of Saskatchewan toward its sustainability

More information

The challenge of mixed plastics recycling. Luca Stramare R&D Manager COREPLA (Italy)

The challenge of mixed plastics recycling. Luca Stramare R&D Manager COREPLA (Italy) The challenge of mixed plastics recycling Luca Stramare R&D Manager COREPLA (Italy) 2 Plastic packaging Protection Convenience Information Producer Transport Marketing Consumer 3 The problem begins at

More information

Conducting a Waste Audit

Conducting a Waste Audit Conducting a Waste Audit An effective waste reduction program must be based on current and accurate information on the quantity and composition of the waste stream. Therefore, the first step is a waste

More information

Iran. F. Fakheri J. Environ. Raouf, Health. et al., Sci. IDENTIFICATION Eng., 2005, Vol. AND 2, No. CLASSIFICATION... 4, pp. 261-266 source reduction

Iran. F. Fakheri J. Environ. Raouf, Health. et al., Sci. IDENTIFICATION Eng., 2005, Vol. AND 2, No. CLASSIFICATION... 4, pp. 261-266 source reduction Iran. J. Environ. Health. Sci. Eng., 2005, Vol. 2, No. 4, pp. 261-266 IDENTIFICATION AND CLASSIFICATION OF INDUSTRIAL SOLID WASTES IN AMMONIA UNIT OF RAZI PETROCHEMICAL COMPLEX AND FEASIBILITY OF WASTE

More information

What are Properties and Working Characteristics?

What are Properties and Working Characteristics? Topic 1 Study Guide 1 about the general properties of resistant materials. Properties Working characteristics What are Properties and Working Characteristics? When designing a product using resistant materials,

More information

CHAPTER 8. PIPING EQUIPMENT AND SYSTEMS. 8.1 Piping System and Components 8.2 Piping 8.3 Pumps 8.4 Valves 8.5 Pipe Fittings and Accessories

CHAPTER 8. PIPING EQUIPMENT AND SYSTEMS. 8.1 Piping System and Components 8.2 Piping 8.3 Pumps 8.4 Valves 8.5 Pipe Fittings and Accessories CHAPTER 8. PIPING EQUIPMENT AND SYSTEMS 8.1 Piping System and Components 8.2 Piping 8.3 Pumps 8.4 Valves 8.5 Pipe Fittings and Accessories 8.1 Piping Systems and Components Piping systems are classified

More information

HEALTHCARE PLASTIC WASTE ANALYSIS OF OLVG HOSPITAL PLASTIC WASTE STREAMS

HEALTHCARE PLASTIC WASTE ANALYSIS OF OLVG HOSPITAL PLASTIC WASTE STREAMS HEALTHCARE PLASTIC WASTE ANALYSIS OF OLVG HOSPITAL PLASTIC WASTE STREAMS Introduction As part of the Nederland Circulair initiative by the Dutch Ministry of Infrastructure and Environment, a variety of

More information

MRK/ 1-12-2011 Page 1(9) 2 Description and assessment of the Production process. 3 Description and assessment of the Surface Treatment Methods

MRK/ 1-12-2011 Page 1(9) 2 Description and assessment of the Production process. 3 Description and assessment of the Surface Treatment Methods Page 1(9) Plus+ 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods 4

More information

FTP Partnering Event. Munich, 27/10/2015

FTP Partnering Event. Munich, 27/10/2015 Developing of expanded nano-cellulose to be used as a more efficient and environmental friendly isolate for buildings MSc./Eng. Michele VAVALLO AIDIMA FTP Partnering Event 2015 Technology Institute on

More information

Recycling of mixed post consumer films. NEXTEK Ltd - What we do & key areas of expertise

Recycling of mixed post consumer films. NEXTEK Ltd - What we do & key areas of expertise Recycling of mixed post consumer films Edward Kosior Nextek Limited The recovery of flexible Plastics Packaging Roundtable Presentations - SPA 24 th (Sydney) and 26 th (Melbourne) of October, 2012 Copyright

More information

COMPOSITE FIBRE PLASTIC MATERIAL

COMPOSITE FIBRE PLASTIC MATERIAL COMPOSITE FIBRE 11 PLASTIC MATERIAL 81 82 GOOD INDUSTRY PRACTICES 11 COMPOSITE FIBRE PLASTIC MATERIAL Natural wood has certain qualities that predispose its use in buildings, especially in outdoor applications.

More information

Ceramic processing. The higher performance of ceramics is the result of strict control ol of purity, composition, microstructure and processing.

Ceramic processing. The higher performance of ceramics is the result of strict control ol of purity, composition, microstructure and processing. Ceramic processing The higher performance of ceramics is the result of strict control ol of purity, composition, microstructure and processing. Because of their inherent brittleness, ceramics cannot be

More information

TESTING LABORATORY ROURKELA

TESTING LABORATORY ROURKELA TESTING LABORATORY ROURKELA 1. Background: Keeping in view of the growing demand of quality of the products of the industries, Govt. has established Testing Laboratory, Rourkela, under the Directorate

More information

Property Test/Standard Description Solids by volume. ISO 3233 Flash point ISO 3679 Method 1 130 C

Property Test/Standard Description Solids by volume. ISO 3233 Flash point ISO 3679 Method 1 130 C Other Technical Data Sheet 8744;8745 6 8744 VValidationDate). 1 Product description This is a two component fairing compound/filler. It is an ultra lightweight, solvent free product. It has excellent sanding

More information

10 Golden Rules in EcoDesign

10 Golden Rules in EcoDesign 10 Golden Rules in EcoDesign Associate Professor, Dr. Conrad Luttropp, [conrad@md.kth.se], KTH Machine Design, SE-100 44 Stockholm, Sweden, Phone: +46 8 790 7497 fax: +46 8 202287 First it must be stated

More information

High performance UV barrier additives based on highly dispersed metal oxides

High performance UV barrier additives based on highly dispersed metal oxides High performance UV barrier additives based on highly dispersed metal oxides Introduction Ultra-Violet can cause damage to polymers & in the case of packaging, to the contents UV absorbers are valuable

More information

PERP/PERP ABSTRACTS 2010. PET Bottle to Bottle Recycling

PERP/PERP ABSTRACTS 2010. PET Bottle to Bottle Recycling PERP/PERP ABSTRACTS 2010 PET Bottle to Bottle Recycling PERP Report Abstract March 2010 PERP Report Abstract (of PERP REPORT 08/09S9) PET Bottle to Bottle Recycling March 2010 The ChemSystems Process Evaluation/Research

More information

1 Description and assessment of the Materials used in the Product. 3 Description and assessment of the Surface Treatment Methods

1 Description and assessment of the Materials used in the Product. 3 Description and assessment of the Surface Treatment Methods Kimmo Sundström page 1 of 6 James mesh back Environmental impact assessment 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description

More information

Construction Automotive Industry.

Construction Automotive Industry. ECOSTYLE Furniture solutions The Natural Choice for Green Design www.rehau.com Construction Automotive Industry GOING GREEN WITH REHAU CUSTOMER COMMITMENT chemicals and to the kitchen industry demanding

More information

Resource and Environmental Profile Analysis of Polyethylene Milk Bottles and Polyethylene-coated Paperboard Milk Cartons

Resource and Environmental Profile Analysis of Polyethylene Milk Bottles and Polyethylene-coated Paperboard Milk Cartons Resource and Environmental Profile Analysis of Polyethylene Milk Bottles and Polyethylene-coated Paperboard Milk Cartons Background Recently, much attention has been directed at packaging by a variety

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 1572 Version 3 Page 1 of 10 National Certificate in Wood Fibre Manufacturing (Pulp and Paper) (Level 3) with strands in Mechanical Pulping, Pulp and Paper Dry End, and Pulp and Paper Wet End

More information

Sustainable Plastics with Reduced Carbon Footprint & Reduced Waste

Sustainable Plastics with Reduced Carbon Footprint & Reduced Waste Sustainable Plastics with Reduced Carbon Footprint & Reduced Waste Joseph P. Greene California State University, Chico Chico, CA 95929-0789 Abstract Plastic products can be made more sustainable by reducing

More information

Comp-AC. ENVIRONMENTAL INFORMATION Recycling instructions for drive of type ACS 200. ABB Oy Product Support 12.11.1998 TLC/Ari Niskanen

Comp-AC. ENVIRONMENTAL INFORMATION Recycling instructions for drive of type ACS 200. ABB Oy Product Support 12.11.1998 TLC/Ari Niskanen 1 ABB Oy Product Support 12.11.1998 TLC/Ari Niskanen Comp-AC ENVIRONMENTAL INFORMATION Recycling instructions for drive of type ACS 200 Table of contents 1. Introduction 2. Product package 3. Product materials

More information

Partnering In Growth Strategy

Partnering In Growth Strategy Partnering In Growth Strategy India On New Growth Cycle! India's economy is now beginning to recover and is expected to grow in the coming years. With new government coming in control with favorable policies

More information

Bonded Abrasives. Precise cutting and grinding discs for many materials

Bonded Abrasives. Precise cutting and grinding discs for many materials Bonded Abrasives Precise cutting and grinding discs for many materials 1 sia Abrasives Your key to a perfect surface Many materials hide a secret. They keep their real beauty hidden. Only a professional

More information

Mission 9: Recycling

Mission 9: Recycling Mission 9: Recycling A Waste of Energy! Factories use lots and lots of energy to make all the things we need in our everyday life, and most of this ends up in the bin. In Northern Ireland, we produce about

More information

Communication and Marketing Planner Submission Form E2746-11 Level One

Communication and Marketing Planner Submission Form E2746-11 Level One Event Name: Event Date: Communication and Marketing Planner Submission Form E2746-11 Level One Planner Address: Event Website: Contact Name: Contact Phone: Contact Email: Communication and Marketing Vendor(s)

More information

Machining. (Reading: Chap 8 in Kalpakjian and Schmid)

Machining. (Reading: Chap 8 in Kalpakjian and Schmid) Machining (Reading: Chap 8 in Kalpakjian and Schmid) Outline Chip formation during machining Force and power requirement Mechanisms of tool wear and fatigue Types and properties of cutting-tool materials

More information

BUSINESS - PLAN. "Recycling of polymers waste and polymers into granules ZIELONA GÓRA, POLAND

BUSINESS - PLAN. Recycling of polymers waste and polymers into granules ZIELONA GÓRA, POLAND BUSINESS - PLAN "Recycling of polymers waste and polymers into granules ZIELONA GÓRA, POLAND 2014 1. 1.1. 1.2. 2. 2.1. 2.2. 2.3. 2.4. 2.5. 2.6. 2.7. 2.8. 2.9. 3. 4. 5. 6. 7. 8. 9. 10. Content Resume General

More information

GREEN EXHIBITION IN AMERICA. Pedro García EXPOMEX - MEXICO

GREEN EXHIBITION IN AMERICA. Pedro García EXPOMEX - MEXICO GREEN EXHIBITION IN AMERICA Pedro García EXPOMEX - MEXICO 1. Trade Show in America. Background. 2. Green Trade Show in America. Present. 3. The 3R of the Environment. 4. The Use of Sustainable Materials

More information

criterion Environmental Technology Flexible separation of light-density materials in the 21st century we process the future

criterion Environmental Technology Flexible separation of light-density materials in the 21st century we process the future criterion Flexible separation of light-density materials in the 21st century we process the future Environmental Technology task Fossil raw materials are running out. Dump capacities are reaching their

More information

High speed machining and conventional die and mould machining

High speed machining and conventional die and mould machining High speed machining and conventional die and mould machining Reprint from HSM - High Speed Machining There are a lot of questions about HSM today and many different, more or less complicated, definitions

More information

CLASSIFIER MILLS SERIES RTM

CLASSIFIER MILLS SERIES RTM P R O D U C T S C A T A L O G U E STM di Francesco Marcon & C. Sas Via Mazzini, 66-21020 TERNATE (VA) - ITALY - Tel. (+39) 0332 943.411 - Fax (+39) 0332 961.585 - e-mail: info@stmimpianti.com www.stmimpianti.com

More information

SANDWICH PANEL JAWDAH S SANDWICH PANEL COVERING MATERIALS

SANDWICH PANEL JAWDAH S SANDWICH PANEL COVERING MATERIALS SANDWICH PANEL The choice of sandwich panels is extremely important and connected with solving of a number of technical problems, which are often unknown for the customers who do not have experience in

More information

EndMills For Hardened Steel

EndMills For Hardened Steel For Hardened Hi-Performance Flute 45 For Tough Features : - Manufactured from premium sub micron grain carbide. - Increased core diameter for added strength. - Use for light finishing cuts - CG coated

More information

Recycling and the Australian Curriculum

Recycling and the Australian Curriculum Recycling and the Australian Curriculum Resources to support the use of recycling as a vehicle for teaching real world science This pdf includes: Images of recycling machinery and processes Teacher notes

More information

HENKEL DUCK TAPE PRODUCT RANGE DIY TAPE RANGE SUMMARY

HENKEL DUCK TAPE PRODUCT RANGE DIY TAPE RANGE SUMMARY DUCK TAPES 1500 0401 Waterproof Duck 50mm x 10m Silver Polyethylene coated cloth tape for 1500 0402 Waterproof Duck 50mm x 50m Silver Polyethylene coated cloth tape for 1500 0403 Waterproof Duck 50mm x

More information

Low cost fencing project 2013 Funding Proposal / Report Engineers without Borders (EWB) University of Cape Town

Low cost fencing project 2013 Funding Proposal / Report Engineers without Borders (EWB) University of Cape Town Low cost fencing project 2013 Funding Proposal / Report Engineers without Borders (EWB) University of Cape Town Compiled by: Mashudu Makhado (project leader) Mufarisi Manyuha Abhilash Alex Stephane Masamba

More information

What is a mold? Casting. Die casting. Injection Molding Machine. Injection Molding. 2.008 Design & Manufacturing II. Spring 2004

What is a mold? Casting. Die casting. Injection Molding Machine. Injection Molding. 2.008 Design & Manufacturing II. Spring 2004 2.008 Design & Manufacturing II What is a mold? From Webster: a cavity in which a substance is shaped: as (1) : a matrix for casting metal (2) : a form in which food is given a decorative shape Spring

More information

Mechanical properties can be permanently altered by either thermal or mechanical treatment. Those properties include:

Mechanical properties can be permanently altered by either thermal or mechanical treatment. Those properties include: Training Objective After watching the program and reviewing this printed material, the viewer will become familiar with further aspects of tool design by exploring the materials used in toolmaking. Tool

More information

Because sustainability matters

Because sustainability matters Because sustainability matters 1992 Mike Biddle begins work on plastics separation Richmond, CA - USA 2002 Edison Award for Innovation 2005 Our aim is to be the leading global plastics recycling company

More information

2007 UNITED STATES NATIONAL POST- CONSUMER PLASTICS BOTTLE RECYCLING REPORT

2007 UNITED STATES NATIONAL POST- CONSUMER PLASTICS BOTTLE RECYCLING REPORT 2007 UNITED STATES NATIONAL POST- CONSUMER PLASTICS BOTTLE RECYCLING REPORT INTRODUCTION The 2007 edition of the United States National Post-Consumer Plastics Bottle Recycling Report is the 18 th annual

More information

RECYCLED C&DW FRACTIONS IN EXTRUDED COMPOSITES

RECYCLED C&DW FRACTIONS IN EXTRUDED COMPOSITES Markku Vikki Conenor Extruded composites (from biobased materials) Conventional single and twin screw plastic extruder Multirotor Conex Wood Extruder Main product area Wood Plastic Composites Global WPC-product

More information

How To Identify Label Material and Select Correct Ribbon Formulation

How To Identify Label Material and Select Correct Ribbon Formulation How To Identify Label Material and Select Correct Ribbon Formulation PAPER Coated Paper 1. Apparel Tags 2. Asset Tracking Labels 3. Bin Labeling 4. Carton Labeling 5. Compliance Carton Labeling 6. Pallet

More information

Technology for Waste Management/Infrastructure Novo Hamburgo (Brasil)

Technology for Waste Management/Infrastructure Novo Hamburgo (Brasil) Technology for Waste Management/Infrastructure Novo Hamburgo (Brasil) Administrative Aspects of the Solid Waste The collection, transportation and final disposal of Residential and Commercial Solid Waste

More information

Masterbatch. Additives

Masterbatch. Additives Masterbatch Additives 2 3 Masterbatch CERETAN micronized waxes for Colour Masterbatch Today all typical processes of the plastics industry use Masterbatches. They are to be found in processes of extrusion,

More information

Material Grade Guide

Material Grade Guide Material Grade Guide Aluminum Cans Containers for beverages made up of a (3000) series aluminum. Excludes vegetable cans, pet food cans, aluminum foil, & potted meat cans. The tabs are NOT worth more separate

More information

A.17. OXIDIZING PROPERTIES (SOLIDS)

A.17. OXIDIZING PROPERTIES (SOLIDS) A.17. OXIDIZING PROPERTIES (SOLIDS) 1. METHOD 1.1. INTRODUCTION It is useful to have preliminary information on any potentially explosive properties of the substance before performing this test. This test

More information

Recycling of plastic waste

Recycling of plastic waste Recycling of plastic waste 44 Topics that will be illustrated: Types of plastic How to collect plastic How to process plastic How to make money out of plastic! Recycling of plastic waste 45 Environmental

More information

PRELIMINARY BROCHURE. Uddeholm Corrax

PRELIMINARY BROCHURE. Uddeholm Corrax PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.

More information

1. Injection Molding (Thermoplastics)

1. Injection Molding (Thermoplastics) 1. Injection Molding (Thermoplastics) l Molding: Injection (thermoplastics) INJECTION MOLDING of thermoplastics is the equivalent of pressure die casting of metals. Molten polymer is injected under high

More information

MATERIAL IDENTIFICATION IN ELECTRONICS

MATERIAL IDENTIFICATION IN ELECTRONICS MATERIAL IDENTIFICATION IN ELECTRONICS Wesley Van Meensel 1, Geert Willems 1, Maarten Cauwe 2 1 Center for Electronics Design & Manufacturing, imec IClink, imec, Kapeldreef 75, 3001 Leuven, Belgium 2 Centre

More information

ImpEE. Recycling of Plastics THE PROJECT IMPROVING ENGINEERING EDUCATION

ImpEE. Recycling of Plastics THE PROJECT IMPROVING ENGINEERING EDUCATION THE IMPROVING ENGINEERING EDUCATION ImpEE PROJECT Recycling of Plastics Plastic waste in the UK 3 million tonnes of waste plastic are produced a year in the UK. 1 tonne = 20,000 plastic bottles 7% of this

More information

Waste Handling Equipment

Waste Handling Equipment Waste Handling Equipment Waste handling equipment is a requirement across various industries for the proper disposal of waste. Different types of waste handling equipment Food Waste Dehydrators Compactors,

More information

POSTCONSUMER CONTENT The use of postconsumer HDPE in bags and films is encouraged, whenever possible.

POSTCONSUMER CONTENT The use of postconsumer HDPE in bags and films is encouraged, whenever possible. HDPE Film and Bags Recycling of HDPE films and bags has significant differences from recycling rigid HDPE. The film and bag recycling often does not include water washing so the density of the films and

More information

Our Stretched Wall Art gives you the same look and feel of stretched canvas however it carries an eco-friendly approach.

Our Stretched Wall Art gives you the same look and feel of stretched canvas however it carries an eco-friendly approach. Our Eco-Art line is comprised of eco-friendly and sustainable materials and inks. The result is vibrant, long lasting art that helps keep our precious resources in tact. 02 Stretched Wall Art 03 Terralon

More information

FLUXearch User Information

FLUXearch User Information FLUXearch User Information The web search engine FLUXearch helps you to find commercial available certified reference materials (CRM) for optical emission spectroscopy (OES) and x ray fluorescence analysis

More information

A.1 Embodied Energy Coefficients - Alphabetical.

A.1 Embodied Energy Coefficients - Alphabetical. A.1 Embodied Energy Coefficients - Alphabetical. MATERIAL MJ/kg MJ/m3 MJ/m2 Aggregate, general 0.10 150 virgin rock 0.04 63 river 0.02 36 Aluminium, virgin 191 515 700 extruded 201 542 700 extruded, anodised

More information

Classic plastic army figures made with injection mold (Reference 1)

Classic plastic army figures made with injection mold (Reference 1) Molding Plastic Last modified July 6, 2015 Abstract: Used plastic can be melted down and molded into a new shape. In this module we will look at different types of recyclable plastic and ways to mold them

More information

GUIDELINES FOR WELDING THERMOPLASTIC MATERIALS (Hot Gas Hand and Hot Gas Extrusion Welding) TABLE OF CONTENTS

GUIDELINES FOR WELDING THERMOPLASTIC MATERIALS (Hot Gas Hand and Hot Gas Extrusion Welding) TABLE OF CONTENTS GUIDELINES FOR WELDING THERMOPLASTIC MATERIALS (Hot Gas Hand and Hot Gas Extrusion Welding) TABLE OF CONTENTS I II III IV V VI COMMON THERMOPLASTICS AND WELDING TECHNIQUES HOT GAS (AIR) WELDING 1 The Process

More information

Electronic Materials able to detect, amplify and transmit electrical signals in a complex manner are light weight, compact and energy efficient

Electronic Materials able to detect, amplify and transmit electrical signals in a complex manner are light weight, compact and energy efficient CHAPTER 1 Knowledge and Comprehension Problems: 1.1 What are the main classes of engineering materials? Answer1.1: Metallic, polymeric, ceramic, composite, and electronic materials are the five main classes.

More information

WEEKLY SAFETY MEETING All Euramax Subsidiaries COMBUSTIBLE DUST. Safety Meeting Contents. Meeting Notice. Leaders Guide.

WEEKLY SAFETY MEETING All Euramax Subsidiaries COMBUSTIBLE DUST. Safety Meeting Contents. Meeting Notice. Leaders Guide. Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read

More information

Basics. Energy from the sun, via photosynthesis in plants

Basics. Energy from the sun, via photosynthesis in plants Biomass Basics Energy from the sun, via photosynthesis in plants This is the same energy we use as food This is the same energy that made fossil fuels; fossil fuels are concentrated over time by the heat

More information

The Surface Finishing Equipment Group Ltd ALUMINUM OXIDE - BROWN

The Surface Finishing Equipment Group Ltd ALUMINUM OXIDE - BROWN TECHNICAL & MATERIAL SAFETY DATA SHEET ALUMINUM OXIDE - BROWN Our Brown Aluminum Oxide is an extremely durable non ferrous abrasive that is produced in a way that generates a blocky shaped particle. This

More information

UI Procedures for Asbestos Management

UI Procedures for Asbestos Management UI Procedures for Asbestos Management The University of Iowa Rev.12/12/2012 These procedures apply to employees and contractors involving the identification, work on, removal, or repair of asbestos-containing

More information

Tablet Packaging Safety

Tablet Packaging Safety Tablet Packaging Safety Tablet Packaging Safety Gossen Metrawatt supplies controllers which assure minimal temperature deviation even in critical applications. TLT 2600 Packaging Machine at Bayer HealthCare

More information

ITS/SGS/BV/ISO ,000,000(2015)

ITS/SGS/BV/ISO ,000,000(2015) ADVANCE 4 plants 120,000 6 automatic electric plating lines 2,500 employees ITS/SGS/BV/ISO9001 85,000,000(2015) Advance Hardware is the leading decorative hardware manufacturer and exporter in China, specializing

More information

Secondary Containment Comparison ATI Ultra COAT vs HDPE

Secondary Containment Comparison ATI Ultra COAT vs HDPE When choosing a secondary containment system it must be chosen based on its ability to withstand long term contact with the natural elements (weather), whatever the tanks hold (unrefined oil, fuels, acids,

More information

Chop Saws and Grinders

Chop Saws and Grinders Chop Saws and Grinders 1. CHOP SAW 1.0 Function of the Chop Saw Chop saws are used to create a rough, initial abrasive cut in a desired material. In principle, a chop saw is an electrically powered motor

More information

9/15/2011. Presented by: Jason Reason, CIH, CSP, CHMM Senior Industrial Hygienist Indiana Occupational Safety and Health Administration

9/15/2011. Presented by: Jason Reason, CIH, CSP, CHMM Senior Industrial Hygienist Indiana Occupational Safety and Health Administration OSHA Combustible Dust Inspections Presented by: Jason Reason, CIH, CSP, CHMM Senior Industrial Hygienist Indiana Occupational Safety and Health Administration Overview Background Information OSHA Combustible

More information

The new Audi R8. Life Cycle Assessment

The new Audi R8. Life Cycle Assessment The new Audi R8 Life Cycle Assessment Audi R8 the life cycle assessment Audi has compiled a detailed life cycle assessment for the Audi R8 Coupé V10 plus 5.2 FSI quattro 449 kw S tronic** (hereinafter:

More information