P68F - Olympian Plus plug-in system Soft start/dump valves

Transcription

1 > > Port size: 3/... / (ISO G/PTF) > > ssists machine designers in complying with the European Machineries Directive > > Can help existing machinery to comply with PUWER (Provision and Use of Work Equipment Regulations > > Controlled increase of downstream pressure on start up > > Solenoid, air pilot or manual operator > > High forward flow capacity > > High flow dump facility Technical features Medium: Flow: Compressed air only 7 dm 3 /s (3 scfm) Operating pressure: (P» P = Cv,) 3 bar (3 psi) minimum (P» P3 = Cv >) Solenoid actuated: Operating pressure: 6,3 bar (9 psi) 0 bar (5 psi) maximum Δp: 0,5 bar (7 psi) Pilot actuated: Port sizes: 7 bar (6 psi) maximum 3/,, / or / Snap pressure: ir pilot port: Full flow when downstream G/ with ISO G main ports pressure reaches % / PTF with PTF main ports of inlet pressure Exhaust port: Charge time: G with ISO G main ports For 5 litre (5 fluid oz) PTF with PTF main ports downstream volume and 6,3 bar Gauge port: (90 psi) inlet pressure 6, sec. / PTF with PTF main ports minimum 5 sec. maximum Rc/ with ISO G main ports Electrical details for solenoid operators Voltage tolerance ± 0% Rating Inlet orifice Electrical connection Technical data - standard models Symbol Port size Size ctuation/ return % continuous duty,0 mm Industrial Standard, mm Solenoid coil mounting Four positions x 90 Protection class mbient/media temperature: Solenoid actuated: C ( F) Pilot actuated: C ( F) Version with gauge: C ( F) ir supply must be dry enough to avoid ice formation at temperatures below + C (+35 F). Voltage Pilot port Weight (kg) G3/ Solenoid/spring V d.c.,95 P6F-6GC-PF *) G Solenoid/spring V d.c.,93 P6F-GC-PF *) G / Basic Solenoid/spring V d.c.,90 P6F-GC-PF *) G / Solenoid/spring V d.c.,9 P6F-BGC-PF *) Without yoke Solenoid/spring V d.c. P6F-BGC-PF *) G3/ ir/spring /,77 P6F-6G- G ir/spring /,75 P6F-G- G / Basic ir/spring /,7 P6F-G- G / ir/spring /,7 P6F-BG- Without yoke ir/spring / P6F-- *) To select other solenoid type and coil voltage refer to option selector on page Voltage codes and spare coils IP 65 (with sealed plug) mm coil for connector interface acc. to industrial standard Voltage Power Inrush/Hold Model Code V d.c. W QM//J/ J V d.c W QM//3J/ 3J 0/0 V 50/60 Hz /,5 V QM//J/ J 0/0 V 50/60 Hz 6/5,0 V QM//9J/ 9J Connector plugs Industrial standard mm -pole + PE Typ Materials: Body, yoke, top and bottom plate: luminium Filter discs: Sintered plastic Internal components: Brass/steel Elastomers: BR without notice, the specifications given in this document. (00-097f) 05 IMI International s.r.o. 05/6 en

2 Option selector Port size 3/ 6 / / B Without yoke Threads PTF ISO G parallel (standard) o yoke (standard) Operator ir pilot (standard) ir pilot with manual lockout G mm solenoid (standard) C mm solenoid with manual lockout B D P6F- - Connector 3 pin plug with cable gland Without Voltage Watts V d.c. W F V d.c. W E 6 V d.c. W D 0/0 V, 50/60 Hz /,5 V B 0/0 V, 50/60 Hz /,5 V o coil Z o solenoid Manual override on-locking, shrouded push button P one Flow characteristics Pressure drop Δ p psi bar 0, 0,6 0, 0, 3 () Inlet pressure bar (psi),0 (5) 6,3 (9) 0.5 (6)(50) (0) (03) dm 3 /s scfm ir flow Maximum charge time Outlet pressure psi liter volume 6 Snap Point Charge time 0bar en without notice, the specifications given in this document. (00-097f) 05 IMI International s.r.o. 05/6

3 ccessories Single yoke Double yoke End connector kit Single yoke non threads 3/ Shut-off valve Threaded inlet only Threaded outlet only Bracket mounting Thread G3/ Y6-6G- Y6-6G T6H-6GB-B T6H-6GC-B G Y6-G- Y6-G T6H-GB-B T6H-GC-B G / Y6-G- Y6-G T6H-GB-B T6H-GC-B G / Y6-BG- Y6-BG T6H-BGB-B T6H-BGC-B / PTF Y6-6- Y T6H-6B-B T6H-6C-B PTF Y6-- Y T6H-B-B T6H-C-B / PTF Y6-- Y T6H-B-B T6H-C-B / PTF Y6-B- Y6-B T6H-BB-B T6H-BC-B ut Silencer Porting block MB00B (R) (G/ & G/) MB00 ( PT) (/ & / PT) Gauges Center back connection, white face (full technical specification see datasheet ) Pressure range bar * Mpa psi Ø Thread size Model , mm R/ mm R/ , mm R/ *) primary scale Center back connection, black face for orth merica (full technical specification see datasheet ) 6 Pressure range psig * bar Mpa Ø Thread size Model (50 mm) / PT (50 mm) / PT (50 mm) / PT *) primary scale 05/6 without notice, the specifications given in this document. (00-097f) 05 IMI International s.r.o. en

4 Dimensions Pilot actuated Standard With manual lockout Dimensions in mm Projection/First angle 67 9 # 63 5 or 3/ Solenoid actuated Standard With manual lockout 69 # # Minimum clearance required to remove unit from yoke Main ports 3/,, / or / Pilot port / 3 Plus 0 mm for ports / or / 7 Gauge port / Exhaust port or 3/ en without notice, the specifications given in this document. (00-097f) 05 IMI International s.r.o. 05/6

5 Single yoke with bracket Double yoke with bracket Dimensions in mm Projection/First angle / Shut-off valve Porting block ,5 7,5, ,5 7,5, For / and / ported yokes add 0 mm For / and / ported yokes add 0 mm Silencer C / ø B Ø D 0 / 0 00 B C D Model R MB00B PT MB00 For / ported yokes add 5 mm Two additional plugged G/ ports Warning E These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering, IMI International s.r.o. Through misuse, age, or malfunction, components used in fluid The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these power systems can fail in various modes. products. 05/6 without notice, the specifications given in this document. (00-097f) 05 IMI International s.r.o. en