glasstec October 21 24, 2014 Düsseldorf
|
|
- Ethelbert Haynes
- 7 years ago
- Views:
Transcription
1 glasstec October 21 24, 2014 Düsseldorf our Mission is Glass
2 1 Our Mission is Glass Functional glazing for building climate control, new lead-free glass colors, microfluidics for biological diagnostics, an innovative coating module, novel methods of cutting laminated glass and of form cutting these are just a few of the up-and-coming developments that we will be presenting at glasstec At the joint Fraunhofer booth in Hall 15, Booth A33, the Fraunhofer Institutes for Laser Technology ILT, for Surface Engineering and Thin Films IST, for Silicate Research ISC, and for Mechanics of Materials IWM will offer visitors the opportunity to discover a wide diversity of practical solutions and new research findings of interest to the glass industry from processes for the development, coating, and machining of glasses over plant engineering up to simulation, analytics and consulting. We look forward to meeting you. 1 ITO coating on glass after a bending process at 650 C. 2 Laser polished sphere out of fused silica. 3 Samples of glass / glass, glass / MAM, glass / silicon and glass / ITO bonds. 4 Sheet glass component from mold-less bending process.
3 2 Fraunhofer Themes Glass and glass machining Architectural and automotive glass Curved sheet glass Vacuum insulation glazing Lead-free glass for marking of hollow glass Microfluidic and micromechanic devices Optical waveguides Colored markings and in-volume structuring Form cutting and drilling Laser precision ablation for contouring Laser structuring of window glass Glass cleaning Functional glass surfaces and coatings Anti-fingerprint coatings Anti-adhesion coatings Antireflective and antistatic coatings Scratchproof coatings Transparent conductive oxide (TCO) coatings Low-emissivity, sun-control and switchable coatings Thin-film resistive heating elements and thermocouples PVD hybrid coatings (organic-inorganic) Coatings for glass-molding dies and forming tools Wellness glass
4 3 Glass development Screening system for the development of new types of glass Special glass and glass ceramics Glass elements with integrated latent heat storage Technologies and processes Sheet glass bending Low-damage cutting of glass materials Soldering and joining of flat glass Laser polishing, bonding, cutting and drilling Laser remelting and structuring of sheet glass Laser-based soldering of glass frits Selective laser-induced etching (SLE) Welding of silica glass Large-area structuring Atomic layer deposition (ALD) Hot-wire CVD processes Magnetron and megatron sputtering Precision molding of optical components Sol-gel coatings OLED fabrication Encapsulation by laser-based soldering processes Smooth deposition on sensitive organic Cutting and drilling of display glass Low-melting glass for encapsulation
5 glasstec Düsseldorf Halle 15 Stand E25 4 Photovoltaics Absorber layers for a-si / μc-si and CIGS solar cells Passivating layers for HIT solar cells Front and back contacts for solar cells Glass lenses for concentrating photovoltaic (CPV) modules Multi-material composites, long-term strength and reliability Modeling and simulation Sheet glass bending Magnetron sputtering, PECVD processes and thin-film growth Stresses in glass and glass-composite components Laser ablation with (ultra) short / long pulses or CW-radiation In-volume material modification by laser Laser welding, soldering, cutting of glass Production of optical filaments, filament cutting by laser Analysis and characterization Morphology (AFM, FIB-SEM, confocal laser microscopy) Electrical conductivity (Hall, Seebeck, I-U curves, TFTs) Reflecto-, Photo- and ellipsometry, quantum yield, scattered light Film composition and layer stress (EDX, EPMA, SIMS, XPS, XRD, XRR) Thermo-optical analysis of glass melts: viscosity, density, wettability, contact angle, surface energy Tests of adhesion and scratch-resistance (taber abraser, tape etc.) Strength, reliability, service life prediction Failure analysis, determination of fracture causes
6 glasstec Düsseldorf October 21 24, 2014 Hall 15, Booth A33 Fraunhofer Institutes Fraunhofer Institute for Laser Technology ILT Steinbachstraße Aachen Dr. Arnold Gillner Phone Fraunhofer Institute for Silicate Research ISC Neunerplatz Würzburg Dr. Martin Kilo Phone martin.kilo@isc.fraunhofer.de Fraunhofer Institute for Surface Engineering and Thin Films IST Bienroder Weg 54 E Braunschweig Dr. Simone Kondruweit Phone simone.kondruweit@ist.fraunhofer.de Fraunhofer Institute for Mechanics of Materials IWM Wöhlerstraße Freiburg i.br. Dr. Rainer Kübler Phone rainer.kuebler@iwm.fraunhofer.de Fraunhofer-Gesellschaft Hansastraße 27 c München Fraunhofer-Gesellschaft, München
FRAUNHOFER INSTITUTe For
FRAUNHOFER INSTITUTe For surface engineering and thin films MOCCA + PROCESS AUTOMATION & OPTICAL MONITORING MOCCA + Automate your thin film coating process In many thin film coating processes various factors
More informationFor Touch Panel and LCD Sputtering/PECVD/ Wet Processing
production Systems For Touch Panel and LCD Sputtering/PECVD/ Wet Processing Pilot and Production Systems Process Solutions with over 20 Years of Know-how Process Technology at a Glance for Touch Panel,
More informationLight management for photovoltaics. Ando Kuypers, TNO Program manager Solar
Light management for photovoltaics Ando Kuypers, TNO Program manager Solar Global energy consumption: 500 ExaJoule/Year Solar irradiation on earth sphere: 5.000.000 ExaJoule/year 2 Capturing 0,01% covers
More informationProspects of Laser Polishing for Small and Complexly Shaped Parts
Prospects of Laser Polishing for Small and Complexly Shaped Parts High Speed / High Precision Laser Microfabrication June 18, 2014 Fraunhofer Institute for Laser Technology ILT Steinbachstraße 15 52074
More information2. Deposition process
Properties of optical thin films produced by reactive low voltage ion plating (RLVIP) Antje Hallbauer Thin Film Technology Institute of Ion Physics & Applied Physics University of Innsbruck Investigations
More informationTesting and characterization of anti-reflection coatings on glass
Testing and characterization of anti-reflection coatings on glass Diagnostic approaches at CSP M.Turek, M. Dyrba, S. Großer, V. Naumann, Ch. Hagendorf contact: marko.turek@csp.fraunhofer.de Tests and methods
More informationDry Film Photoresist & Material Solutions for 3D/TSV
Dry Film Photoresist & Material Solutions for 3D/TSV Agenda Digital Consumer Market Trends Components and Devices 3D Integration Approaches Examples of TSV Applications Image Sensor and Memory Via Last
More informationCoating Technology: Evaporation Vs Sputtering
Satisloh Italy S.r.l. Coating Technology: Evaporation Vs Sputtering Gianni Monaco, PhD R&D project manager, Satisloh Italy 04.04.2016 V1 The aim of this document is to provide basic technical information
More informationOPTIMIZING OF THERMAL EVAPORATION PROCESS COMPARED TO MAGNETRON SPUTTERING FOR FABRICATION OF TITANIA QUANTUM DOTS
OPTIMIZING OF THERMAL EVAPORATION PROCESS COMPARED TO MAGNETRON SPUTTERING FOR FABRICATION OF TITANIA QUANTUM DOTS Vojtěch SVATOŠ 1, Jana DRBOHLAVOVÁ 1, Marian MÁRIK 1, Jan PEKÁREK 1, Jana CHOMOCKÁ 1,
More informationMetrology of silicon photovoltaic cells using coherence correlation interferometry
Loughborough University Institutional Repository Metrology of silicon photovoltaic cells using coherence correlation interferometry This item was submitted to Loughborough University's Institutional Repository
More informationLe nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia
Le nanotecnologie: dal Laboratorio al Mercato Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia Materials & Processes for micro nanotechnologies Laboratory http://www.polito.it/micronanotech
More informationGood Boards = Results
Section 2: Printed Circuit Board Fabrication & Solderability Good Boards = Results Board fabrication is one aspect of the electronics production industry that SMT assembly engineers often know little about.
More informationYour ideas. Our technologies.
Your ideas. Our technologies. For more than a decade, 3M has been a trusted supplier of advanced materials for the solar industry. Our broad range of products and technologies is designed to enhance performance,
More informationGrad Student Presentation Topics PHGN/CHEN/MLGN 435/535: Interdisciplinary Silicon Processing Laboratory
Grad Student Presentation Topics 1. Baranowski, Lauryn L. AFM nano-oxidation lithography 2. Braid, Jennifer L. Extreme UV lithography 3. Garlick, Jonathan P. 4. Lochner, Robert E. 5. Martinez, Aaron D.
More informationALD Atomic Layer Deposition
Research - Services ALD Atomic Layer Deposition Atomic Layer Deposition is a deposition process for assembling of thin films on the nanometer scale. The self-limiting deposition of atomic monolayers occurs
More informationIntroduction. Focusing on marketing & sales of standard process equipment as standard systems as well
Introduction C-Tech is a global acting company with an experienced team of experts, having its management headquarters in the Netherlands and financial holding in Hungary Focusing on marketing & sales
More informationDevelopment/ 3D Modelling Calculations and Sizing Design Eco-design Expert knowledge Software Virtual prototyping Simulation.
BUSINESS FIELDS REPRESENTED: Studies and development Equipment supply Raw materials Additive manufacturing Rapid prototyping Design and manufacture of rapid tooling and / or prototype molds Laboratory
More information3M Products for Solar Energy. Designed for efficiency. Built to last.
3M Products for Solar Energy Designed for efficiency. Built to last. 2 3M Products for Solar Energy From factory to field, 3M is with you. Every step of the way. Making solar power more efficient. More
More informationOptical Disc and Solar Annual Press/Analyst Conference - March 26, 2010
SMART SOLUTIONS TO DRIVE THE FUTURE Optical Disc and Solar Annual Press/Analyst Conference - Dr. - Ing. Stefan Rinck AG Optical Disc & Solar - 2 - Optical Disc - Blu-ray Excellent starting position for
More informationDr Marcin Adamiak marcin.adamiak. www.imiib.polsl.pl/
FP7 NMP/INCO Brokerage Event Warsaw, 17-18 September 2009 Dr Marcin Adamiak marcin.adamiak adamiak@polsl.pl http://www.imiib.polsl.pl www.imiib.polsl.pl/ Institute of Engineering Materials and Biomaterials
More informationEngineering Materials Research /DEVISER/
DEVelopment of Infrastructure for Smart Engineering Materials Research /DEVISER/ A Czech structural funds project aimed for building a new public research infrastructure called Laboratory of Functional
More informationPROVIDING TECHNICAL SOLUTIONS FOR BIOLOGICAL PROCESSES AND MEDICAL DEVICES
PROVIDING TECHNICAL SOLUTIONS FOR BIOLOGICAL PROCESSES AND MEDICAL DEVICES ABOUT LIFE SCIENCES ENGINEERING The joint Life Sciences Engineering business unit of Fraunhofer IPT and CMI has offices in Boston,
More informationFLEXIBLE CIRCUITS MANUFACTURING
IPC-DVD-37 FLEXIBLE CIRCUITS MANUFACTURING Below is a copy of the narration for DVD-37. The contents of this script were developed by a review group of industry experts and were based on the best available
More informationMiniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M
Miniaturizing Flexible Circuits for use in Medical Electronics Nate Kreutter 3M Drivers for Medical Miniaturization Market Drivers for Increased use of Medical Electronics Aging Population Early Detection
More informationCIRP Encyclopedia of Production Engineering
The International Academy for Production Engineering Luc Laperriere Gunther Reinhart Editors CIRP Encyclopedia of Production Engineering Volume 1 A-H With 1145 Figures and 85 Tables ^ Springer Reference
More informationExploring the deposition of oxides on silicon for photovoltaic cells by pulsed laser deposition
Applied Surface Science 186 2002) 453±457 Exploring the deposition of oxides on silicon for photovoltaic cells by pulsed laser deposition Lianne M. Doeswijk a,*, Hugo H.C. de Moor b, Horst Rogalla a, Dave
More informationhistaris Inline Sputtering Systems
vistaris histaris Inline Sputtering Systems Inline Sputtering Systems with Vertical Substrate Transport Modular System for Different Applications VISTARIS Sputtering Systems The system with the brand name
More informationProduct-group categories
Product-group categories 1. Development 1.1 Development and design 1.2 IT systems/software 1.3 Model making and prototyping 1.4 Tooling and mold making 1.5 Tools 1.6 Semi-finished goods, materials 1.7
More informationPulsed laser deposition of organic materials
Pulsed laser deposition of organic materials PhD theses Gabriella Kecskeméti Department of Optics and Quantum Electronics University of Szeged Supervisor: Dr. Béla Hopp senior research fellow Department
More informationHow to Build a Printed Circuit Board. Advanced Circuits Inc 2004
How to Build a Printed Circuit Board 1 This presentation is a work in progress. As methods and processes change it will be updated accordingly. It is intended only as an introduction to the production
More informationSolar Photovoltaic (PV) Cells
Solar Photovoltaic (PV) Cells A supplement topic to: Mi ti l S Micro-optical Sensors - A MEMS for electric power generation Science of Silicon PV Cells Scientific base for solar PV electric power generation
More informationNorth Rhine-Westphalia The economic powerhouse of Europe
Enabling Technologies made in NRW, Cluster NanoMicro+Materials.NRW November, 10 th 2010 North Rhine-Westphalia The economic powerhouse of Europe 150 million consumers within about a 500-kilometer radius
More informationWATERPROOF PHOTOVOLTAIC SYSTEM
WATERPROOF PHOTOVOLTAIC SYSTEM Nola, the biggest BIPV plant in the world. 25 MWp 9 KWp 7 KWp 580 KWp 110 KWp 20 KWp 430 KWp Synthetic layer - 50 KWp Synthetic layer - 30 KWp Synthetic layer -9 KWp STOPPING
More informationLight management for photovoltaics using surface nanostructures
Light management for photovoltaics using surface nanostructures Roberta De Angelis Department of Industrial Engineering and INSTM, University of Rome Tor Vergata New Materials For Optoelectronics webnemo.uniroma2.it
More informationIBS - Ion Beam Services
IBS - Ion Beam Services Profile Technologies Devices & sensor fabricat ion Participation to R&D programs Researched partnership Présentation activité composant 1 Profile : Products and services Product
More informationSolar Energy. Solar Energy range. NSG TEC Pilkington Microwhite Pilkington Optiwhite Pilkington Sunplus
Solar Energy Solar Energy range NSG TEC Pilkington Microwhite Pilkington Optiwhite Pilkington Sunplus Moving from hydrocarbon dependency to renewable energy The use of solar energy glass and the NSG Group
More informationThe New PVD HI3-Technology: Latest Developments and Potential for Coining Dies.
The New PVD HI3-Technology: Latest Developments and Potential for Coining Dies. Technical Forum - World Money Fair 2015, Berlin 29 th January 2015, Oerlikon The New Segment Surface Solutions Segment Manmade
More informationHigh Density Ceramic TCO Sputtering Targets. Indium Tin Oxide (ITO) for deposition of transparent conductive oxide layers
High Density Ceramic TCO Sputtering Targets Indium Tin Oxide (ITO) for deposition of transparent conductive oxide layers High Density Ceramic TCO Sputtering Targets: Indium Tin Oxide (ITO) Rotary ceramic
More informationDIEGO TONINI MORPHOLOGY OF NIOBIUM FILMS SPUTTERED AT DIFFERENT TARGET SUBSTRATE ANGLE
UNIVERSITÀ DEGLI STUDI DI PADOVA SCIENCE FACULTY MATERIAL SCIENCE DEGREE INFN LABORATORI NAZIONALI DI LEGNARO DIEGO TONINI MORPHOLOGY OF NIOBIUM FILMS SPUTTERED AT DIFFERENT TARGET SUBSTRATE ANGLE 2 QUESTIONS
More informationExcerpt Direct Bonded Copper
xcerpt irect Bonded Copper Presented by ouglas C. Hopkins, Ph.. 312 Bonner Hall University at Buffalo Buffalo, Y 14620-1900 607-729-9949, fax: 607-729-7129 Authors thank Curamik lectronics A member of
More informationInline & Integrated Manufacturing Equipment. Marcel Grooten CEO OTB Engineering
Inline & Integrated Manufacturing Equipment Marcel Grooten CEO OTB Engineering 12-2-2007 OTB Introduction New development Supporting other BU s Ophthalmic Car glazing Inline solar-cell production equipment
More informationLaboratory #3 Guide: Optical and Electrical Properties of Transparent Conductors -- September 23, 2014
Laboratory #3 Guide: Optical and Electrical Properties of Transparent Conductors -- September 23, 2014 Introduction Following our previous lab exercises, you now have the skills and understanding to control
More informationF ormation of Very Low Resistance Contact for Silicon Photovoltaic Cells. Baomin Xu, Scott Limb, Alexandra Rodkin, Eric Shrader, and Sean Gamer
F ormation of Very Low Resistance Contact for Silicon Photovoltaic Cells Baomin Xu, Scott Limb, Alexandra Rodkin, Eric Shrader, and Sean Gamer Palo Alto Research Center, 3333 Coyote Hill Road, Palo Alto,
More informationLOW-E PHOTOVOLTAIC GLASS TECHNICAL GUIDE
LOW-E GLASS TECHNICAL GUIDE SELECTIVE INFRARED RADIATION FILTER Infrared radiation coming from natural sun light can cause a heat build-up inside building; This situation leads to thermal imbalance during
More informationPhotovoltaic Glass Solutions
Photovoltaic Glass Solutions POWER THROUGH GLASS EcoGuard Float low-iron float glass Step up your power. Guardian EcoGuard coated solar glass products improve the performance of your photovoltaic modules.
More informationChapter 4 COATINGS Full Reflective Coatings:
Chapter 4 COATINGS Technical developments in coatings for plastic optics have resulted in optical and durability characteristics once believed possible only with glass. These advances in coating technology
More informationFlex Circuit Design and Manufacture.
Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit
More informationPV in Baltic Eco-energy Cluster
DEPARTMENT OF PHYSICAL ASPECTS OF ECOENERGY Michał Górski The Szewalski Institute of Fluid-Flow Machinery Polish Academy of Sciences Gdańsk BEEC Actions: reducing the proportion of fossil fuels as the
More informationEvaluating Surface Roughness of Si Following Selected Lapping and Polishing Processes
Applications Laboratory Report 86 Evaluating Surface Roughness of Si Following Selected Processes Purpose polishing of samples is a common application and required for a variety of manufacturing and research
More informationNeuere Entwicklungen zur Herstellung optischer Schichten durch reaktive. Wolfgang Hentsch, Dr. Reinhard Fendler. FHR Anlagenbau GmbH
Neuere Entwicklungen zur Herstellung optischer Schichten durch reaktive Sputtertechnologien Wolfgang Hentsch, Dr. Reinhard Fendler FHR Anlagenbau GmbH Germany Contents: 1. FHR Anlagenbau GmbH in Brief
More informationPamukkale Üniversitesi Mühendislik Bilimleri Dergisi. Pamukkale University Journal of Engineering Sciences
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt 19, Sayı 7 (IMSP 2013 Özel Sayı), Sayfalar 275-280 Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Pamukkale University Journal of Engineering
More informationHigh performance. Architectural glazings utilise thin. low-emissivity coating. Coating technology
Coating technology High performance low-emissivity coating Growing concern with energy efficiency has sparked the development of double low-emissivity coatings in architectural glass. BOC Coating has designed
More informationh e l p s y o u C O N T R O L
contamination analysis for compound semiconductors ANALYTICAL SERVICES B u r i e d d e f e c t s, E v a n s A n a l y t i c a l g r o u p h e l p s y o u C O N T R O L C O N T A M I N A T I O N Contamination
More informationGroup of Electrophotonics
Group of Electrophotonics MIND-IN2UB, Departament d Electrònica Universitat de Barcelona Prof. Blas Garrido, Dr. Sergi Hernández, Adrià Huguet Ferran, Dr Yonder Berencén, Julià López Vidrier, Joan Manel
More informationChemical Synthesis. Overview. Chemical Synthesis of Nanocrystals. Self-Assembly of Nanocrystals. Example: Cu 146 Se 73 (PPh 3 ) 30
Chemical Synthesis Spontaneous organization of molecules into stable, structurally well-defined aggregates at the nanometer length scale. Overview The 1-100 nm nanoscale length is in between traditional
More informationPlasma Electronic is Partner of. Tailor-Made Surfaces by Plasma Technology
Precision Fair 2013 Stand 171 Plasma Electronic is Partner of Tailor-Made Surfaces by Plasma Technology Dr. J. Geng, Plasma Electronic GmbH Modern Surface Technology in 1900 Overview A short introduction
More informationProduction of Solar Energy Using Nanosemiconductors
Production of Solar Energy Using Nanosemiconductors 1 Kiruthika S, 2 Dinesh Kumar M, 3 Surendar.A 1, 2 II year, KSR College of Engineering, Tiruchengode, Tamilnadu, India 3 Assistant Professor, KSR College
More informationFaszination Licht. Entwicklungstrends im LED Packaging. Dr. Rafael Jordan Business Development Team. Dr. Rafael Jordan, Business Development Team
Faszination Licht Entwicklungstrends im LED Packaging Dr. Rafael Jordan Business Development Team Agenda Introduction Hermetic Packaging Large Panel Packaging Failure Analysis Agenda Introduction Hermetic
More informationAdaptive and innovative glass for PV and special applications
EUROGLAS PV Flat and EUROGLAS PV Hy TCO Adaptive and innovative glass for PV and special applications Base glass The material glass has a long tradition and will have an excellent future. The outstanding
More informationChapter 6 Metal Films and Filters
Chapter 6 Metal Films and Filters 6.1 Mirrors The first films produced by vacuum deposition as we know it were aluminum films for mirrors made by John Strong in the 1930s; he coated mirrors for astronomical
More informationCombustion chemical vapor deposition
V I P Combustion chemical vapor deposition A technology to improve adhesion on surfaces to be coated Volkmar J. Eigenbrod, Christina Hensch, Alexander Kemper Introduction Combustion chemical vapor deposition
More informationT.M.M. TEKNIKER MICROMACHINING
T.M.M. TEKNIKER MICROMACHINING Micro and Nanotechnology Dapartment FUNDACION TEKNIKER Avda. Otaola. 20 Tel. +34 943 206744 Fax. +34 943 202757 20600 Eibar http://www.tekniker.es TMM FACILITIES -Clean Room
More informationMicrowave Multi-layer Printed Circuit Boards
Microwave Multi-layer Printed Circuit Boards MicroAPS at IEEE MTT-S IMS in Fort Worth, TX Ed Sandor, Manager of Application Engineering, Taconic Advanced Dielectric Division June 9, 2004 Abstract Over
More informationState of the art in reactive magnetron sputtering
State of the art in reactive magnetron sputtering T. Nyberg, O. Kappertz, T. Kubart and S. Berg Solid State Electronics, The Ångström Laboratory, Uppsala University, Box 534, S-751 21 Uppsala, Sweden D.
More informationHigh power picosecond lasers enable higher efficiency solar cells.
White Paper High power picosecond lasers enable higher efficiency solar cells. The combination of high peak power and short wavelength of the latest industrial grade Talisker laser enables higher efficiency
More informationScanning Near Field Optical Microscopy: Principle, Instrumentation and Applications
Scanning Near Field Optical Microscopy: Principle, Instrumentation and Applications Saulius Marcinkevičius Optics, ICT, KTH 1 Outline Optical near field. Principle of scanning near field optical microscope
More informationSilicon Wafer Solar Cells
Silicon Wafer Solar Cells Armin Aberle Solar Energy Research Institute of Singapore (SERIS) National University of Singapore (NUS) April 2009 1 1. PV Some background Photovoltaics (PV): Direct conversion
More informationConductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice.
CMOS Processing Technology Silicon: a semiconductor with resistance between that of conductor and an insulator. Conductivity of silicon can be changed several orders of magnitude by introducing impurity
More informationStructure and properties of transparent conductive ZnO films grown by pulsed laser
Structure and properties of transparent conductive ZnO films grown by pulsed laser deposition (PLD) by Yu Hsiu, Lin A dissertation submitted to the University of Birmingham for the degree of Master of
More informationAGRICULTURAL COVERING
1 AGRICULTURAL COVERING Patent number: US2015064415 Date of publication: 2015-03-05 Applicant(s): BEAULIEU TECHNICAL TEXTILES (BE) The present invention is directed to an agricultural covering in form
More informationBasic principles and mechanisms of NSOM; Different scanning modes and systems of NSOM; General applications and advantages of NSOM.
Lecture 16: Near-field Scanning Optical Microscopy (NSOM) Background of NSOM; Basic principles and mechanisms of NSOM; Basic components of a NSOM; Different scanning modes and systems of NSOM; General
More informationLaser sintering of greens compacts of MoSi 2
Laser sintering of greens compacts of MoSi 2 G. de Vasconcelos 1, R. Cesar Maia 2, C.A.A.Cairo 3, R. Riva 2, N.A.S.Rodrigues 2, F.C.L.Mello 3 Instituto de Estudos Avançados 1, Instituto Tecnológico de
More informationFraunhofer Institute for Material and Beam Technology
Laser Micro Processing Dr. Udo Klotzbach Fraunhofer Institute for Material and Beam Technology Dresden Overview Equipment - CO 2 -lasers - Solid state lasers (Nd:YAG, Disk, Fiber) - Diode lasers - Excimer
More informationDevelopment of New Inkjet Head Applying MEMS Technology and Thin Film Actuator
Development of New Inkjet Head Applying MEMS Technology and Thin Film Actuator Kenji MAWATARI, Koich SAMESHIMA, Mitsuyoshi MIYAI, Shinya MATSUDA Abstract We developed a new inkjet head by applying MEMS
More informationWhite Paper. Recommendations for Installing Flash LEDs on Flex Circuits. By Shereen Lim. Abstract. What is a Flex Circuit?
Recommendations for Installing Flash LEDs on Circuits By Shereen Lim White Paper Abstract For the mobile market some PCB assemblies have been converted to flex circuit assemblies, in part because flex
More informationTIE-31: Mechanical and thermal properties of optical glass
PAGE 1/10 1 Density The density of optical glass varies from 239 for N-BK10 to 603 for SF66 In most cases glasses with higher densities also have higher refractive indices (eg SF type glasses) The density
More informationBIOACTIVE COATINGS ON 316L STAINLESS STEEL IMPLANTS
Trends Biomater. Artif. Organs. Vol. 17(2) pp 43-47 (2004) http//www.sbaoi.org BIOACTIVE COATINGS ON 316L STAINLESS STEEL IMPLANTS N. Ramesh Babu*,+, Sushant Manwatkar*, K. Prasada Rao* and T. S. Sampath
More informationLaserbearbeitung von dünnen Schichten auf Rolle-zu-Rolle-Anlagen
Laserbearbeitung von dünnen Schichten auf Rolle-zu-Rolle-Anlagen Dr. Frank Allenstein 3D-Micromac AG 3D-Micromac At a Glance 141 employees in R&D, manufacturing and service Worldwide more than 300 industrial
More informationStrategy for Functional Material Development in FUJIFILM
証券コード 4901 Strategy for Functional Material Development in FUJIFILM - Global competency strategy for business innovation in Functional Material Industry - Sep. 24, 2013 FUJIFILM Corporation Development
More informationMold Preventing I nterior System
interior insulation and renovation boards A system of components that have been designed to work perfectly together to repair damage caused by mold. The system consists of boards, insulation wedges, reveal
More informationSOLAR ELECTRICITY: PROBLEM, CONSTRAINTS AND SOLUTIONS
SOLAR ELECTRICITY: PROBLEM, CONSTRAINTS AND SOLUTIONS The United States generates over 4,110 TWh of electricity each year, costing $400 billion and emitting 2.5 billion metric tons of carbon dioxide (Yildiz,
More informationChapter 70. Glass and glassware
Notes. 1.- This Chapter does not cover : Chapter 70 Glass and glassware (a) Goods of heading 32.07 (for example, vitrifiable enamels and glazes, glass frit, other glass in the form of powder, granules
More informationHow compact discs are made
How compact discs are made Explained by a layman for the laymen By Kevin McCormick For Science project at the Mountain View Los Altos High School Abstract As the major media for music distribution for
More informationUNIT I: INTRFERENCE & DIFFRACTION Div. B Div. D Div. F INTRFERENCE
107002: EngineeringPhysics Teaching Scheme: Lectures: 4 Hrs/week Practicals-2 Hrs./week T.W.-25 marks Examination Scheme: Paper-50 marks (2 hrs) Online -50marks Prerequisite: Basics till 12 th Standard
More informationDevelopment of High-Speed High-Precision Cooling Plate
Hironori Akiba Satoshi Fukuhara Ken-ichi Bandou Hidetoshi Fukuda As the thinning of semiconductor device progresses more remarkably than before, uniformity within silicon wafer comes to be strongly required
More informationGraphene a material for the future
Graphene a material for the future by Olav Thorsen What is graphene? What is graphene? Simply put, it is a thin layer of pure carbon What is graphene? Simply put, it is a thin layer of pure carbon It has
More informationSimple and scalable fabrication approaches of Nanophotonic structures for PV
Simple and scalable fabrication approaches of Nanophotonic structures for PV Fabien Sorin Surface du Verre et Interfaces (SVI), UMR 125 CNRS/Saint-Gobain, 39, Quai Lucien Lefranc, 93303 Aubervilliers,
More informationApplied Optics and Optical Materials at the Colorado School of Mines
Applied Optics and Optical Materials at the Colorado School of Mines CPIA Annual Meeting 14 November 2007 Charles Durfee Engineering Physics program Applied Optics and Optical Materials Colorado School
More informationHow To Make A Plasma Control System
XXII. Erfahrungsaustausch Mühlleiten 2015 Plasmaanalyse und Prozessoptimierung mittels spektroskopischem Plasmamonitoring in industriellen Anwendungen Swen Marke,, Lichtenau Thomas Schütte, Plasus GmbH,
More informationMicrostockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / LCMS Grenoble)
Microstockage d énergie Les dernières avancées S. Martin (CEA-LITEN / LCMS Grenoble) 1 Outline What is a microbattery? Microbatteries developped at CEA Description Performances Integration and Demonstrations
More informationSILA Sistema Integrato di Laboratori per l Ambiente. CENTRE FOR MICROSCOPY AND MICROANALYSIS Scientific coordinator: Prof.ssa Rosanna De Rosa
CENTRE FOR MICROSCOPY AND MICROANALYSIS Scientific coordinator: Prof.ssa Rosanna De Rosa 0 The Centre for Microscopy and Microanalysis (CM2) is an interdisciplinary service centre, a comprehensive suite
More informationComparative Analysis of Retrofit Window Film to Replacement with High Performance Windows
Comparative Analysis of Retrofit Window Film to Replacement with High Performance Windows By Steve DeBusk, CEM, CMVP Global Energy Solutions Manager CPFilms, a Subsidiary of Solutia Inc. Abstract Energy
More informationCeralink Capabilities and Opportunities
Ceralink Capabilities and Opportunities Dr. Holly Shulman President, Materials Scientist Ceralink Inc. Rensselaer Technology Park 105 Jordan Rd. Troy, New York 12180 holly@ceralink.com www.ceralink.com
More informationSOLAR CELLS From light to electricity
SOLAR CELLS From light to electricity Solar Impulse uses nothing but light to power its motors. The effect of light on the material in solar panels allows them to produce the electricity that is needed
More informationCHAPTER 5. OVERVIEW OF THE MANUFACTURING PROCESS
CHAPTER 5. OVERVIEW OF THE MANUFACTURING PROCESS 5.1 INTRODUCTION The manufacturing plant considered for analysis, manufactures Printed Circuit Boards (PCB), also called Printed Wiring Boards (PWB), using
More informationImproved Contact Formation for Large Area Solar Cells Using the Alternative Seed Layer (ASL) Process
Improved Contact Formation for Large Area Solar Cells Using the Alternative Seed Layer (ASL) Process Lynne Michaelson, Krystal Munoz, Jonathan C. Wang, Y.A. Xi*, Tom Tyson, Anthony Gallegos Technic Inc.,
More informationCell-to-Module Gains and Losses in Crystalline Silicon PV. Andrew Gabor Gabor Photovoltaics Consulting, LLC July 10, 2013 - Intersolar NA
Cell-to-Module Gains and Losses in Crystalline Silicon PV Andrew Gabor Gabor Photovoltaics Consulting, LLC July 10, 2013 - Intersolar NA 1 Some material sourced from 2 Outline Background Loss/Gain Types
More informationExcimer Laser Technology
D. Basting G. Marowsky (Eds.) Excimer Laser Technology With 257 Figures ^y Springer Contents 1 Introduction 1 1.1 Introductory Remarks 1 1.1.1 The Unique Microstructuring Capabilities of Excimer Lasers
More informationResearch Article Solar Module Fabrication
Photoenergy Volume 2007, Article ID 27610, 5 pages doi:10.1155/2007/27610 Research Article Solar Module Fabrication A. El Amrani, A. Mahrane, F. Y. Moussa, and Y. Boukennous Silicon Technology Unit, 2
More informationPHYSICAL PROPERTIES: GLASS. Forensic Science CC 30.07 Spring 2007 Prof. Nehru
PHYSICAL PROPERTIES: GLASS Physical vs. Chemical Properties The forensic scientist must constantly determine those properties that impart distinguishing characteristics to matter, giving it a unique identity.
More information