Minidlahy Miniplates. Minidlaha pøímá, 4 otvory, mùstek 10 mm Straight miniplate, 4 holes, 10 mm bridge

Size: px
Start display at page:

Download "Minidlahy Miniplates. Minidlaha pøímá, 4 otvory, mùstek 10 mm Straight miniplate, 4 holes, 10 mm bridge"

Transcription

1 Minidlaha pøímá, 4 otvory, mùstek 10 mm Straight miniplate, 4 holes, 10 mm bridge Minidlaha pøímá, 4 otvory, mùstek 15 mm Straight miniplate, 4 holes, 15 mm bridge Minidlaha pøímá, 5 otvorù, mùstek 10 mm Straight miniplate, 5 holes, 10 mm bridge

2 Minidlaha pøímá, 5 otvorù, mùstek 15 mm Straight miniplate, 5 holes, 15 mm bridge Minidlaha pøímá, 6 otvorù, mùstek 10 mm Straight miniplate, 6 holes, 10 mm bridge Minidlaha pøímá, 26 otvorù Straight miniplate, 26 holes

3 Minidlaha L ¹ikmá levá, mùstek 13 mm L-oblique miniplate left, 13 mm bridge Minidlaha L ¹ikmá pravá, mùstek 13 mm L-oblique miniplate right, 13 mm bridge Minidlaha L, ¹ikmá levá, mùstek 17 mm L - oblique miniplate left, 17 mm bridge

4 Minidlaha L, ¹ikmá pravá, mùstek 17 mm L - oblique miniplate right, 17 mm bridge Minidlaha Y, 4 otvory, mùstek 13 mm Y - miniplate, 4 holes, 13 mm bridge Minidlaha Y, 4 otvory, mùstek 17 mm Y - miniplate, 4 holes, 17 mm bridge

5 Minidlaha T, 6 otvorù T - miniplate, 6 holes Minidlaha T, ¹ikmá levá, mùstek 13 mm T - oblique miniplate left, 13 mm bridge Minidlaha T, ¹ikmá pravá, mùstek 13 mm T - oblique miniplate right, 13 mm bridge

6 Minidlaha T, ¹ikmá levá, mùstek 17 mm T - oblique miniplate left, 17 mm bridge Minidlaha T, ¹ikmá pravá, mùstek 17 mm T - oblique miniplate right, 17 mm bridge Minidlaha sagitální levá, mùstek 11 mm Sagittal split miniplate left, 11 mm bridge

7 Minidlaha sagitální pravá, mùstek 11 mm Sagittal split miniplate right, 11 mm bridge Minidlaha sagitální levá, mùstek 21 mm Sagittal split miniplate left, 21 mm bridge Minidlaha sagitální pravá, mùstek 21 mm Sagittal split miniplate right, 21 mm bridge

8 Minidlaha Y, ¹ikmá levá, 6 otvorù Y - oblique miniplate left, 6 holes Minidlaha Y, ¹ikmá pravá, 6 otvorù Y - oblique miniplate right, 6 holes

9 Minidlaha onkologická pøímá, 26 otvorù Oncological miniplate straight, 26 holes Minidlaha onkologická ¹ikmá levá, 26 otvorù Oncological miniplate L oblique left

10 Minidlaha onkologická ¹ikmá pravá, 26 otvorù Oncological miniplate L oblique right, 26 holes Materiál: Titan (ISO 5832/2)

. . Highway and Bridge Company 1 Straight Place Fort Worth, TX 76107 24,672,000

More information

EE Bucket datasheet Height 1580 mm. Width 2000 mm. Depth 1690 mm

EE Bucket datasheet Height 1580 mm. Width 2000 mm. Depth 1690 mm EE 3160 1580 mm 2000 mm Volume ISO (m³) 2,1 Volume SAE(m³) 2,4 Screening area (m²) 1,4 Mass of the bucket (kg) 2300 weight for excavator (tons) 25 weight for wheel loader (tons) 8 1690 mm Uses 60 mm axels

More information

DECLARATION OF PERFORMANCE NO. HU-DOP_TN-212-25_001

DECLARATION OF PERFORMANCE NO. HU-DOP_TN-212-25_001 NO. HU-DOP_TN-212-25_001 Product type 212 (TN) 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-35_001 Product type 212 (TN) 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-45_001 Product type 212 (TN)

More information

DECLARATION OF PERFORMANCE NO. HU-DOP_TD-25_001

DECLARATION OF PERFORMANCE NO. HU-DOP_TD-25_001 NO. HU-DOP_TD-25_001 Product type TD 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-35_001 Product type TD 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-45_001 Product type TD 3,5x45 mm EN 14566:2008+A1:2009

More information

WALL & CEILING 8mm Slots 12.6% 10mm Slots 15.7%

WALL & CEILING 8mm Slots 12.6% 10mm Slots 15.7% eurohush S1 8mm Slots 12.6% 10mm Slots 15.7% Standard MDF 3600 x 1200mm 100 1 0 EXAMPLE SPECIFICATION: EH S1/10 S PO BLUE eurohush S2 8mm Slots 11.4% 10mm Slots 14.3% EXAMPLE SPECIFICATION: EH S2/10 S

More information

ALSPEC ALUMINIUM SYSTEMS TECHNICAL MANUAL

ALSPEC ALUMINIUM SYSTEMS TECHNICAL MANUAL PAGE: 2.3.1 PAGE: 2.3.2 PAGE: 2.3.3 PAGE: 2.3.4 Test results - AS2047 PAGE: 2.3.5 Test results - AS2047 PAGE: 2.3.6 Test results - AS2047 PAGE: 2.3.7 PAGE: 2.3.8 Test results - AS2047 PAGE: 2.3.9 PAGE:

More information

A N A M E T F I T T I N G S ( U L / C S A ) for S e a l t i t e

A N A M E T F I T T I N G S ( U L / C S A ) for S e a l t i t e A N A M E T F I T T I N G S ( U L / C S A ) for S e a l t i t e ISO, straight fitting ISO thread M12x1,5* M16X1,5 M20X1,5 M16X1,5 M20X1,5 M25X1,5 M32X1,5 M40X1,5 M50X1,5 M63X1,5 For Sealtite size inch

More information

TUBULAR Holing and Slotting Of Casing

TUBULAR Holing and Slotting Of Casing TUBULAR Holing and Slotting Of Casing Holing and Slotting of Casing Introduction.................. 243-244 Slotting machines Hydraulic Handling System Holing Machines Deburring Pipe coating Banding QA

More information

The Ring Fixator System

The Ring Fixator System Half Rings Internal Dia. D 100000080 80 D 100000100 100 D 100000110 110 D 100000120 120 D 100000130 130 D 100000140 140 D 100000150 150 D 100000160 160 D 100000180 180 D 100000200 200 D 100000220 220 D

More information

APPLICAZIONI PTO/POMPA PTO/PUMP ADAPTORS

APPLICAZIONI PTO/POMPA PTO/PUMP ADAPTORS APPLICAZIONI / / ADARS CODICE CODE 114 Manicotto / Hub UNI - UNI 114-003-00014 114-000-00106 114-000-10604 Lunghezza / Lenght = 30mm Manicotto / Hub UNI/DIN - UNI/DIN 114-004-00059 114-000-00115 114-000-11505

More information

Fittings for PTFE hose

Fittings for PTFE hose Raccordi per tubo PTFE / Fittings for PTFE hose Pagina / Page 2 2 3 3 5 Ghiere Ferrule GAS BSP 0TP1 00TC T051 T151 T350 Per Tubo 'T' Per Tubo 'TC' BSP straight BSP 90 BSP Male For 'T' hose For 'TC' hose

More information

SPEED LADDER DRILLS. STRAIGHT RUN (1 foot in hole) Facing the front of the ladder:

SPEED LADDER DRILLS. STRAIGHT RUN (1 foot in hole) Facing the front of the ladder: SPEED LADDER DRILLS STRAIGHT RUN ( foot in hole) Facing the front of the ladder: Run through the ladder, placing the LEFT () foot in first hole, followed by the RIGHT () foot in the second hole Follow

More information

TRUELOK PARTS REFERENCE GUIDE

TRUELOK PARTS REFERENCE GUIDE TRUELOK PARTS REFERENCE GUIDE External Supports 450179C Rings 56-10840 56-10860 56-10890 56-10900 * 56-10910 56-10920 * 56-10930 56-10940 * 56-10950 * 56-10960 56-10970 56-10980 Internal Diameter 80mm

More information

Technical Specification. Transport and Main Roads Specifications MRTS79 Fabrication of Aluminium Components

Technical Specification. Transport and Main Roads Specifications MRTS79 Fabrication of Aluminium Components Technical Specification Transport and Main Roads Specifications MRTS79 Fabrication of Aluminium Components June 2013 Copyright http://creativecommons.org/licenses/by/3.0/au/ State of Queensland (Department

More information

Rational Functions 5.2 & 5.3

Rational Functions 5.2 & 5.3 Math Precalculus Algebra Name Date Rational Function Rational Functions 5. & 5.3 g( ) A function is a rational function if f ( ), where g( ) and h( ) are polynomials. h( ) Vertical asymptotes occur at

More information

Supplement No. 1 WWPA WESTERN LUMBER GRADING RULES. Grading Rule Changes For: Beams and Stringers Posts and Timbers Measurement of Characteristics

Supplement No. 1 WWPA WESTERN LUMBER GRADING RULES. Grading Rule Changes For: Beams and Stringers Posts and Timbers Measurement of Characteristics Supplement No. 1 WWPA WESTERN LUMBER GRADING RULES 2011 Grading Rule Changes For: Beams and Stringers Posts and Timbers Measurement of Characteristics SUPPLEMENT NO. 1 WESTERN LUMBER GRADING RULES 2011

More information

Integra. Large Uni-Clip Dual-Compression Staples SURGICAL TECHNIQUE

Integra. Large Uni-Clip Dual-Compression Staples SURGICAL TECHNIQUE Integra Large Uni-Clip Dual-Compression Staples SURGICAL TECHNIQUE Table of Contents Design Rationale...02 Indications...02 Description...02 Surgical Technique...03 Surgical Site Preparation...03 Step

More information

How to order: Please prefix the mbo part number or description with R239- example: R239-10 01 0004 9001/014

How to order: Please prefix the mbo part number or description with R239- example: R239-10 01 0004 9001/014 Cotter bolts according to DIN EN 22340/ISO 2340 form A without pin holes form B with pin holes Example for ordering: form A: Bolt without pin holes according to DIN EN 22340/ISO 2340, d=10mm, l=30mm, electroplated

More information

Chapter 7 Pictorials Topics Exercises

Chapter 7 Pictorials Topics Exercises Chapter 7 Pictorials Topics Exercises Pictorials: Topics Summary 7.1) Pictorials Introduction 7.2) Isometric Pictorial Axes 7.3) Drawing Linear Features 7.4) Drawing Circles and Radii 7.5) Drawing Cylinders

More information

CONSTRUCTION OF ELLIPSE

CONSTRUCTION OF ELLIPSE CONSTRUCTION OF ELLIPSE Procedure: The procedure for drawing an ellipse by the Concentric Circle method is described below: Two circles are drawn with the major and minor diameters of 60 mm and 40 mm respectively

More information

2 Unit Bridging Course Day 2 Linear functions II: Finding equations

2 Unit Bridging Course Day 2 Linear functions II: Finding equations 1 / 38 2 Unit Bridging Course Day 2 Linear functions II: Finding equations Clinton Boys 2 / 38 Finding equations of lines If we have the information of (i) the gradient of a line (ii) the coordinates of

More information

Osteosynthesis. Reference Guide for Upper-Face Mid-Face Orthognathics Mandible Fracture and Reconstruction

Osteosynthesis. Reference Guide for Upper-Face Mid-Face Orthognathics Mandible Fracture and Reconstruction Osteosynthesis Reference Guide for Upper-Face Mid-Face Orthognathics Mandible Fracture and Reconstruction Legend The color coding of the screw diameter 1.2 mm Screw Diameter 1.7 mm Screw Diameter 2.0 mm

More information

Staple Fixation System. Implants Instruments Applications

Staple Fixation System. Implants Instruments Applications Staple Fixation System Implants Instruments Applications Contents Introduction 3 Instrument Use - Universal Inserter 4 Instrument Use - Universal Rod 5 Ordering Information - Implants 6 Ordering Information

More information

Sheet Metal Design. Preface What's New? Getting Started Basic Tasks Workbench Description Customizing Glossary Index

Sheet Metal Design. Preface What's New? Getting Started Basic Tasks Workbench Description Customizing Glossary Index Sheet Metal Design Preface What's New? Getting Started Basic Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface The V5 CATIA - Sheet Metal Design

More information

t _ b s _ x f _ t g _ m h _ n h _ t p _ g s _ n c _ t

t _ b s _ x f _ t g _ m h _ n h _ t p _ g s _ n c _ t Navn: Klasse: t _ b s _ x f _ t g _ m h _ n h _ t p _ g s _ n c _ t Materiale ID: BOG.16.1.1.da Lærer: Dato: Klasse: t u b s i x f a t g e m h e n h a t p i g s u n c a t Materiale ID: BOG.16.1.1.da Navn:

More information

t _ b s _ x f _ t g _ m h _ n h _ t p _ g s _ n c _ t

t _ b s _ x f _ t g _ m h _ n h _ t p _ g s _ n c _ t Navn: Klasse: t _ b s _ x f _ t g _ m h _ n h _ t p _ g s _ n c _ t Materiale ID: BOG.16.1.1.da Navn: Klasse: t _ b p _ g f _ t l _ p h _ t c _ r b _ t v _ n g _ m Materiale ID: BOG.16.2.1.da Navn: Klasse:

More information

Peter Meyer Ball valves Cryogenic

Peter Meyer Ball valves Cryogenic Peter Meyer Ball valves Cryogenic Features Swiss manufacturer One-piece body design Laser welded, whitout body seal Chambered seats Cryogenic extension Cavity pressure relief system Replaceable packing

More information

WASHINGTON UNDERINSURED MOTORISTS COVERAGE SELECTION/REJECTION

WASHINGTON UNDERINSURED MOTORISTS COVERAGE SELECTION/REJECTION IL U 008 04 06 WASHINGTON UNDERINSURED MOTORISTS COVERAGE SELECTION/REJECTION Policy Number: Policy Effective : Company: Producer: Applicant/Named Insured: Washington law permits you to make certain decisions

More information

Multiflux-2 Interfaces

Multiflux-2 Interfaces Unit 1, Anglian Business Park, Orchard Road, Royston, Hertfordshire, SG8 5TW, UK T: +44 (0)1763 242491 F: +44 (0)1763 246125 E: sales@dolomite-microfluidics.com W: www.dolomite-microfluidics.com Dolomite

More information

RAIN COLLECTOR S HELF MANUAL

RAIN COLLECTOR S HELF MANUAL RAIN COLLECTOR S HELF MANUAL The Rain Collector Shelf provides a good mounting support for your Rain Collector II. The Rain Collector Shelf is designed to be attached to Davis Sensor Mounting Arm, and

More information

CH Type of teeth A-JG TRACK Type of teeth A-JG Type of teeth B-TG ,80 26,20 26,60 22,00 23,60 30,10 27,80 28,60 32,50 45,60 59,80

CH Type of teeth A-JG TRACK Type of teeth A-JG Type of teeth B-TG ,80 26,20 26,60 22,00 23,60 30,10 27,80 28,60 32,50 45,60 59,80 email: info@gebhardt.cz, www.gebhardt.cz, IČO : 15 66 51 19 list Chainrings KLASIC s in Euro Chainrings Standard KLASIC classical chainring (MTB and roads, without a special adaptation) time trial, triathlon

More information

CONTENTS. Crimp Tooling 12

CONTENTS. Crimp Tooling 12 CONTENTS Solid Busbars 2 Copper Laminated Connectors 2 Flexible Copper Connectors 3 Copper Pressings, Links and Coils 3 Heatsinks, Coolers and Machined Parts 4 Earth Bars 4 Terminals 5 - Standard Duty

More information

Aluminum Linear Ball Bearing Stages

Aluminum Linear Ball Bearing Stages Stainless Rack Pinion Aluminum Linear Ball Bearing Stages Lightweight Precision ball bearings Straightness of travel

More information

Multilevel Socket Technologies

Multilevel Socket Technologies Multilevel Socket Technologies High Performance IC Sockets And Test Adapters Overview Company Overview Over 5,000 products High Performance Adapters and Sockets Many Custom Designs & Turn-Key Solutions

More information

Area and Perimeter. Practice: Find the perimeter of each. Square with side length of 6 cm. Rectangle with side lengths of 4 cm and 7 cm

Area and Perimeter. Practice: Find the perimeter of each. Square with side length of 6 cm. Rectangle with side lengths of 4 cm and 7 cm Area and Perimeter Perimeter: add up all the sides (the outside of the polygon) Practice: Find the perimeter of each Square with side length of 6 cm Rectangle with side lengths of 4 cm and 7 cm Parallelogram

More information

Panels. 2 Align existing hole, centerline, and top 3 Mark the centerline on inside and. of panel with markings on lock drill outside of fixture.

Panels. 2 Align existing hole, centerline, and top 3 Mark the centerline on inside and. of panel with markings on lock drill outside of fixture. L430 Self Latch Smart Lock PL701, PL702 Non-Recessed Installation Refer to Page 1 Recessed Installation (Panel must be routed) Refer to Page 3 Panel Panels Panel Panel Panel SD0319 Rev0 01/19/16 1 Replace

More information

Radius and Diameter of Circles (A)

Radius and Diameter of Circles (A) Radius and Diameter of Circles (A) C=40.841 ft C=57.805 mm C=15.708 ft C=33.929 cm Radius and Diameter of Circles (A) Answers C=40.841 ft C=57.805 mm 6.5 ft 9.2 mm 13.0 ft 18.4 mm C=15.708 ft C=33.929

More information

DRAFTING MANUAL. Dimensioning and Tolerancing Symbols GENIUM PUBLISHING. Section 6.1 Page 1 February 1997* Update by: Bruce 56A. Wilson.

DRAFTING MANUAL. Dimensioning and Tolerancing Symbols GENIUM PUBLISHING. Section 6.1 Page 1 February 1997* Update by: Bruce 56A. Wilson. Update 56 Update by: Bruce 56A. Wilson Symbols Section 6.1 Page 1 SYMBOLS 1.0 GENERAL 1 2.1 Diameter - A diameter symbol is placed in front of any dimension value that is a diameter. See Figure 2. This

More information

How to Identify Fluid Ports and Connectors

How to Identify Fluid Ports and Connectors How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections HYDRAULIC HOSE How to measure threads Measure the thread diameter with

More information

Current Transformers

Current Transformers Supersedes December 2002 General Description Eaton s low voltage current transformers are available in both solid core and split core designs. Engineered for electronic metering applications, all solid

More information

15. MODULUS OF ELASTICITY

15. MODULUS OF ELASTICITY Chapter 5 Modulus of Elasticity 5. MODULUS OF ELASTICITY The modulus of elasticity (= Young s modulus) E is a material property, that describes its stiffness and is therefore one of the most important

More information

WING CAR BODY SETUP. page 1. MARKING OUT. 145mm

WING CAR BODY SETUP. page 1. MARKING OUT. 145mm WING CAR BODY SETUP page 1. MARKING OUT 1.5mm 20mm front pin 145mm 30mm The basic marking out of a wing car body previous to painting, taking a measurement of 30mm from the rear tip of body make a dot

More information

16 Circles and Cylinders

16 Circles and Cylinders 16 Circles and Cylinders 16.1 Introduction to Circles In this section we consider the circle, looking at drawing circles and at the lines that split circles into different parts. A chord joins any two

More information

Product Overview. Restraint systems. Flooring systems. Seating systems. Solar systems

Product Overview. Restraint systems. Flooring systems. Seating systems. Solar systems Product Overview Seating systems Solar systems Wheelchair tie-downs This brochure includes a selection of products from the Unwin range. For the full product range, please consult our website or product

More information

Technical Drawing. MEC1000 Spring 2006 Instructor: David Anderson

Technical Drawing. MEC1000 Spring 2006 Instructor: David Anderson Technical Drawing MEC1000 Spring 2006 Instructor: David Anderson Topics Drawing Views Drawing Standards Best Practices Creating Drawings in SolidWorks Spring 2006 MEC1000 Technical Drawing - D. Anderson

More information

Global Automotive Exhaust Manifold Gasket Market is. projected to expand at 3.5% CAGR till 2019

Global Automotive Exhaust Manifold Gasket Market is. projected to expand at 3.5% CAGR till 2019 Global Automotive Exhaust Manifold Gasket Market is projected to expand at 3.5% CAGR till 2019 Automotive exhaust manifold gasket is a automotive mechanical seal which fills the space between two or more

More information

Hair and Fiber Identification

Hair and Fiber Identification Chemical Principles Exp. #7 Hair and Fiber Identification Fibers are produced naturally by plants and animals and synthetically by man. By gross observation, most fibers have a high length-to-width ratio

More information

Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling

Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling Due to the many different configurations of cabed and non-cabed tractors this article

More information

Primary. Progression 1. Progression 2. Progression 3. Primary. Progression 1. Progression 2. Progression 3. www.gymstick.com.au

Primary. Progression 1. Progression 2. Progression 3. Primary. Progression 1. Progression 2. Progression 3. www.gymstick.com.au Partner: Client Client - Bicep Curl Combo Client one: Supine with bands in hands and dual arm bicep curl Client two: Kneeling with bicep curl Client one: Supine with alternating bicep curl Client two:

More information

6 U CompactPCI Backplane with 8 Slots

6 U CompactPCI Backplane with 8 Slots 6 U CompactPCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI

More information

Length, Finland, MIKES (VTT Technical Research Centre of Finland Ltd, Centre for Metrology / Mittatekniikan keskus)

Length, Finland, MIKES (VTT Technical Research Centre of Finland Ltd, Centre for Metrology / Mittatekniikan keskus) absolute mise en pratigue: mise en pratigue: absolute absolute Level or Range 633 633 nm 0.04 fm 2 95% No 1 474 474 THz 24 khz 2 95% No 1 532 532 nm 0.08 fm 2 95% No 50 563 563 THz 0.08 MHz 2 95% No 51

More information

Special modifications available: - lengths - finish/colors/plating/anodizing

Special modifications available: - lengths - finish/colors/plating/anodizing Search Tube,,, Tubing Tube connection components function like industrial Tinker Toys, and can be combined with round or square tubing to build jigs, fixtures, and operating systems. We offer a vast array

More information

s e d u g l i e s u n i l o g m u lt i p o l e TTT Products Limited Feb of 6

s e d u g l i e s u n i l o g m u lt i p o l e TTT Products Limited Feb of 6 s e d u g l i e s u n i l o g m u lt i p o l e utility marine tttested tttprotect TTT Products Limited Feb 2016. 1 of 6 Who are we? You'll find that poles from TTT Products will be the best quality you

More information

MITECH FLANGE TABLE GUIDE

MITECH FLANGE TABLE GUIDE MITECH FLANGE TABLE GUIDE Nominal Size - 25mm (1") Nominal Size - 150mm (6") Nominal Size - 32mm (1 1/4") Nominal Size - 200mm (8") Nominal Size - 40mm (1 1/2") Nominal Size - 250mm (10") Nominal Size

More information

Dŵr y Felin Comprehensive School. Perimeter, Area and Volume Methodology Booklet

Dŵr y Felin Comprehensive School. Perimeter, Area and Volume Methodology Booklet Dŵr y Felin Comprehensive School Perimeter, Area and Volume Methodology Booklet Perimeter, Area & Volume Perimeters, Area & Volume are key concepts within the Shape & Space aspect of Mathematics. Pupils

More information

The Crankshaft Oil Seal Section has been added to the DD15 Workshop Manual. The sections that are found in the Engine Chapter are now renumbered.

The Crankshaft Oil Seal Section has been added to the DD15 Workshop Manual. The sections that are found in the Engine Chapter are now renumbered. NUMBER: 08 DD15-5 S.M. REF.: 1.11 ENGINE: DD15 DATE: July 2008 SUBJECT: CRANKSHAFT OIL SEAL SECTION PUBLICATION: DDC-SVC-MAN-0002 The Crankshaft Oil Seal Section has been added to the DD15 Workshop Manual.

More information

Core Stability Exercises

Core Stability Exercises Core Stability Exercises Crunch on Ball with Bar 1) Sit in upright position on stability with feet flat on floor. 2) Walk feet forward allowing the ball to roll underneath body 3) Place hands across your

More information

Accoya Radiata Pine Lumber Grading Specifications. Grade Names & Definitions for Accoya Radiata Pine Version 9.0

Accoya Radiata Pine Lumber Grading Specifications. Grade Names & Definitions for Accoya Radiata Pine Version 9.0 Accoya Radiata Pine Lumber Grading Specifications Grade Names & Definitions for Accoya Radiata Pine Version 9.0 Accoya Radiata Pine Lumber Grades Rough Surfaced Accoya Front Wood Side Surfaced Backside

More information

Lasers. Lasers. Lasers. Lasers for. for Patient. Lasers. Lasers. Alignment - Room

Lasers. Lasers. Lasers. Lasers for. for Patient. Lasers. Lasers. Alignment - Room for for for for for for for for for for for for Patient Patient Patient Patient Patient Patient Patient Patient Patient Patient Patient Patient Alignment Alignment Alignment Alignment Alignment Alignment

More information

Compact Medium-pressure Vane Pump

Compact Medium-pressure Vane Pump Compact Medium-pressure Vane Pump Features The straight vane type structure realizes compact and lightweight design which brings greater cost effectiveness. These vane pumps with a maximum pressure of

More information

Modular Hand SySteM. For fractures, replantations, tions, and reconstruction of the hand. ProduCt overview

Modular Hand SySteM. For fractures, replantations, tions, and reconstruction of the hand. ProduCt overview Modular Hand SySteM For fractures, replantations, tions, and reconstruction of the hand ProduCt overview Modular Hand System Plates precontoured for anatomic fit Instruments color-coded for easy recognition

More information

Catalog Trauma Implants. Instruments. Sets. Instruments and implants approved by the AO Foundation

Catalog Trauma Implants. Instruments. Sets. Instruments and implants approved by the AO Foundation Catalog Trauma 2011 Implants Instruments Sets Instruments and implants approved by the AO Foundation LCP Modular Mini Fragment Instrument and Implant Sets 01.111.120 LCP Modular Mini Fragment Instrument

More information

80 Ncm. Powerful for surgery

80 Ncm. Powerful for surgery 80 Ncm Powerful for surgery Logical integration of ease of use Just one operating stage for setting all necessary parameters. The six most important recurring operational procedures can be saved as individual

More information

Connector. 2.54mm Pin Header Series ORDER INFORMATION. Product No.: KLS XX-S

Connector. 2.54mm Pin Header Series ORDER INFORMATION. Product No.: KLS XX-S KLS1-7 PIN HEADER mm(0.100") Straight Pin Type Contact Resistance: mωmax. at DC 100mA area and plated on wire Cutting area P. C. B Layout - Product No.: KLS1-7-1-XX-S mm KLS1-7 PIN HEADER mm(0.100") Right

More information

Floor/Field Stretches

Floor/Field Stretches Floor/Field Stretches 3D Hip Flexor Stretch *Start position* 1. Swing arms above head as front knee drives forward (x 5-10) 2. Swing arms over each shoulder as front knee drives forward 3D Groin Stretch

More information

Traditional Drawing Tools

Traditional Drawing Tools Engineering Drawing Traditional Drawing Tools DRAWING TOOLS DRAWING TOOLS 1. T-Square 2. Triangles DRAWING TOOLS HB for thick line 2H for thin line 3. Adhesive Tape 4. Pencils DRAWING TOOLS 5. Sandpaper

More information

PRO-DESKTOP Spatula assignment

PRO-DESKTOP Spatula assignment PRO-DESKTOP Spatula assignment Draw your spatula shape by:- 1. Open up PRO-DESKTOP from your programmes menu. Then click on the file menu > new> design. 2. The new design window will now open. Double click

More information

INDUSTRIAL TECHNOLOGY TECHNICAL DRAWING LEVEL 9

INDUSTRIAL TECHNOLOGY TECHNICAL DRAWING LEVEL 9 INDUSTRIAL TECHNOLOGY TECHNICAL DRAWING LEVEL 9 Reduction and enlargement of plane figures to reduce plane figure by lengths of sides using the polar method. - Reading Suppose the ratio is skills. 1:3.

More information

Innovative Temperature Measurement in Heat Treatment Processes

Innovative Temperature Measurement in Heat Treatment Processes Thermo Sensor GmbH Siemensstraße 36 59199 Bönen Germany Tel.: +49 2383-92102-0 Fax: +49 2383-92102-99 www.thermo-sensor.de info@thermo-sensor.de Innovative Temperature Measurement in Heat Treatment Processes

More information

Peter Meyer Ball valves

Peter Meyer Ball valves HANWEL Peter Meyer Ball valves Features Swiss manufacturer One-piece body design (*with screwed insert) Laser welded, whitout body seal Full bore Chambered seats Integrated cavity pressure relief system

More information

Contents: Drills: page 5. Table. Reamers: page 89. Taps & Dies: page 116. End Mills: page 169. Saws & Cutters: page 240. Miscellaneous: page 253

Contents: Drills: page 5. Table. Reamers: page 89. Taps & Dies: page 116. End Mills: page 169. Saws & Cutters: page 240. Miscellaneous: page 253 . Drills: page 5 Table of Contents: Reamers: page 89 Taps & Dies: page 116 End Mills: page 169 Saws & Cutters: page 240 Miscellaneous: page 253 Specials: page 272 Technical: page 278 List Number Index:

More information

1. The "Spinal Twist"

1. The Spinal Twist 14 Pierrepont Rd (617) 527-0667 Newton, MA. 02462 www.simplycircus.com info@simplycircus.com Everyday Stretches & Exercises This is a routine that emphasizes stretching and strengthening the muscles that

More information

PC/104, PC/104 -Plus, VarPol connectors

PC/104, PC/104 -Plus, VarPol connectors 164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header

More information

Modular Mini Fragment LCP System. 2.0 mm, 2.4 mm and 2.7 mm instrument and implant modules.

Modular Mini Fragment LCP System. 2.0 mm, 2.4 mm and 2.7 mm instrument and implant modules. Modular Mini Fragment LCP System. 2.0 mm, 2.4 mm and 2.7 mm instrument and implant modules. Plates with locking compression technology Locking and cortex screws Instruments designed for use with mini fragment

More information

SPIRAL POINT TAPS. GEWINDEBOHRER MIT SCHALANSCHNITT -Tapping Through Holes, HSS-E & HSS-PM HSS. Being the best through innovation

SPIRAL POINT TAPS. GEWINDEBOHRER MIT SCHALANSCHNITT -Tapping Through Holes, HSS-E & HSS-PM HSS. Being the best through innovation HSS eing the best through innovation OINT GEWINDEOHRER IT SCHALANSCHNITT -Tapping Through Holes, & HSS- - Für Durchgangslöcher. und HSS- SELECTION GUIDE OINT Tapping Through Holes, & HSS- OINT ED No. ODEL

More information

Slim Desk Mount Articulating Monitor Arm with Cable Management

Slim Desk Mount Articulating Monitor Arm with Cable Management Slim Desk Mount Articulating Monitor Arm with Cable Management ARMSLIM *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía

More information

Double Bone Plug Meniscus Reconstruction Surgical Technique

Double Bone Plug Meniscus Reconstruction Surgical Technique Double Bone Plug Meniscus Reconstruction Surgical Technique Double Bone Plug Meniscus Low Profile Reamer 2-0 FiberWire Meniscus Repair Needles Collared Pin & Coring Reamer Set RetroConstruction Drill Guide

More information

Impact of PMBOK 5 th Edition

Impact of PMBOK 5 th Edition PMP Exam Changes Impact of PMBOK 5 th Edition When the PMI exam will change Major Updates X1.1 Scope of Update Comments and feedbacks for prior version Overall review for accuracy Appropriate alignment

More information

Series 1000 Desk Products Installation Instructions

Series 1000 Desk Products Installation Instructions Series 1000 Desk Products Installation Instructions Return Worktop Rectangular Desk Peninsula Bridge Worktop Bow Front Desk Grand Peninsula Corner Desk - Straight Front L-Return Desk - Straight Front Radius

More information

Module 4 Fasteners. Version 2 ME, IIT Kharagpur

Module 4 Fasteners. Version 2 ME, IIT Kharagpur Module 4 Fasteners Lesson 1 Types of fasteners: Pins and keys Instructional Objectives At the end of this lesson, the students should have the knowledge of Fasteners and their types: permanent and detachable

More information

C U TT I N G T O O L S

C U TT I N G T O O L S C U TT I N G T O O L S SUPER CAPITAL TOOLS Manufacturers & Exporters of Gear Hobs, Milling Cutters, Scalping Cutters. D-101, Focal Point, Patiala - 147003, (Punjab) India. Range of Products GEAR HOBS Diameter

More information

New Product Hotline - 800-336-3575

New Product Hotline - 800-336-3575 Dia. M12-1.25 (continued) 6-242 M12-1.25 12.56mm 37.5mm 11.5mm 6-375 M12-1.25 14.25mm 41.5mm 14mm 6-263 M12-1.25 12.83mm 32.5mm 7mm 6-320 M12-1.25 12.83mm 41.5mm 14mm 6-322 M12-1.25 14.27mm 30.5mm 6mm

More information

Module 3.3. Calculation of U-value Simple construction without thermal bridging

Module 3.3. Calculation of U-value Simple construction without thermal bridging Module 3.3 Calculation of U-value Simple construction without thermal bridging Learning Outcomes On successful completion of this module learners will be able to - Describe the procedure for the calculation

More information

AP P L I C AT I O N FOR P AR K & S TREET FURNITURE DON AT I ON AN D M E M ORIAL P L AQ U E S

AP P L I C AT I O N FOR P AR K & S TREET FURNITURE DON AT I ON AN D M E M ORIAL P L AQ U E S AP P L I C AT I O N FOR P AR K & S TREET FURNITURE DON AT I ON AN D M E M ORIAL P L AQ U E S Applicant: Contact Person: Postal Address: Phone Number: Email: Individuals or groups may wish to place park

More information

Law of Cosines. If the included angle is a right angle then the Law of Cosines is the same as the Pythagorean Theorem.

Law of Cosines. If the included angle is a right angle then the Law of Cosines is the same as the Pythagorean Theorem. Law of Cosines In the previous section, we learned how the Law of Sines could be used to solve oblique triangles in three different situations () where a side and two angles (SAA) were known, () where

More information

Display Products Artwork Specification

Display Products Artwork Specification Display Products Artwork Specification 3 Artwork Specifications 4 Budget Bannerstand 5 Sigma Bannerstand 6 Jenko Curve 7 Sidewinder Bannerstand 8 M2 Bannerstand 9 Quickscreen Bannerstand 10 Pop-Up Specifications

More information

CUTTING-OFF AND GRINDING WHEELS. 14 Useful Information 16 Cutting-Off Wheels 20 Grinding Wheels

CUTTING-OFF AND GRINDING WHEELS. 14 Useful Information 16 Cutting-Off Wheels 20 Grinding Wheels CUTTING-OFF AND GRINDING WHEELS 14 Useful Information 16 Cutting-Off Wheels 20 Grinding Wheels 13 USEFUL INFORMATION Flexovit offers an extensive range of professional high performance wheels suitable

More information

Entity/Relationship Modelling. Database Systems Lecture 4 Natasha Alechina

Entity/Relationship Modelling. Database Systems Lecture 4 Natasha Alechina Entity/Relationship Modelling Database Systems Lecture 4 Natasha Alechina In This Lecture Entity/Relationship models Entities and Attributes Relationships Attributes E/R Diagrams For more information Connolly

More information

Basic information 1 An introduction to basic camera controls

Basic information 1 An introduction to basic camera controls Basic information 1 An introduction to basic camera controls Camera types Compact Camera Small, lightweight but limited advanced controls Small sensor size Bridge Camera Advanced features comparable to

More information

DATA SHEET. Code: 9285. Product: MacDRAIN N 105M

DATA SHEET. Code: 9285. Product: MacDRAIN N 105M Code: 9285 Product: MacDRAIN N 105M 3-D structure with on one side a nonwoven geotextile and a waterproofing geomembrane on the other side Weight : 410 gr/m^2 (EN ISO 9864) Thickness @ 2 kpa : 5,0 mm (EN

More information

KIN Biomechanics

KIN Biomechanics KIN 335 - Biomechanics LAB: Center of Mass (Center of Gravity) of the Human Body Reading Assignment: Bishop, R.D. & Hay, J.G. (1979). Basketball: the mechanics of hanging in the air. Medicine and Science

More information

1 Soft limits means limits set in the system which are more stringent than the actual limits to be adhered to. Such as Stock Splits, Dividend, Rights Issues, Buy Back, Bonus Issues etc. Such

More information

Zimmer Zimmer Herbert. Surgical Technique

Zimmer Zimmer Herbert. Surgical Technique 1 Zimmer Zimmer Herbert Bone Herbert Screw and Zimmer Cannulated Herbert Mini Bone Bone Screw Screw Surgical Technique 2 Zimmer Herbert Bone Screw and Zimmer Herbert Mini Bone Screw Table of Contents Indications

More information

Investment Projects - Health Safety & Environment Good Practice Guide

Investment Projects - Health Safety & Environment Good Practice Guide Introduction In the absence of a Network Rail standard covering remedial work to existing cable routes, this document is to provide guidance on the standard of refurbishment required when undertaking the

More information

DXC BATTERY PERFORMANCE SPECIFICATIONS RESERVE POWER

DXC BATTERY PERFORMANCE SPECIFICATIONS RESERVE POWER BATTERY PERFORMANCE SPECIFICATIONS RESERVE POWER Introducing the DataSafe The DataSafe range of flooded lead calcium flat plate Features Capacity range: 0.607-5.161 kw per cell Suitable for UPS & Switchgear

More information

By the end of this set of exercises, you should be able to:

By the end of this set of exercises, you should be able to: BASIC GEOMETRIC PROPERTIES By the end of this set of exercises, you should be able to: find the area of a simple composite shape find the volume of a cube or a cuboid find the area and circumference of

More information

SURGICAL TECHNIQUE FIGURE 1

SURGICAL TECHNIQUE FIGURE 1 SURGICAL TECHNIQUE UNI-Elbow Radio Capitellum System Surgical Technique 1 SURGICAL TECHNIQUE 2 Incision The patient is placed under a general or a regional anesthesia. The extremity is prepped and draped

More information