G 1/4 3/2 Solenoid/ air spring , /4 NPT 3/2 Solenoid/ air spring ,

Transcription

1 97 Inline /, 5/ & 5/ way spool valves electromagnetic actuated, indirectly controlled G /, / NPT For single and double operated actuators Crossover-free switching, switch-over function guaranteed even with small cross section air supply Manual override with detent standard The solenoid valves are applicable in the protection class - Ex m for zones,,, (gases and dusts) ATEX cat.ii GD - Ex ia for zones,, (gases) ATEX cat.ii G, - Ex na, for zones, (gases and dusts) ATEX cat.ii GD Approval depends on magnetic system, see page! Technical features Medium: Filtered, non-lubricated or dry compressed air Operation: Indirectly solenoid operated soft seal valves Operating pressure:... 8 bar Orifice: 6 mm Port size: G /, / NPT Mounting position: Optional Flow direction: Fixed Electrical connection: See solenoid table Fluid/Ambient temperature: Valve: C Depending on solenoid system Air supply must be dry enough to avoid ice formation at temperatures below + C. Materials: Housing: Aluminium.65 anodized Pilot flange: Plastic (PBT) Seals: NBR Technical data Symbol Port size Function Actuation/return Operating pressure (bar) Flow (l/min) Weight (kg) Dimension No. Model *) G / / Solenoid/ air spring ,5 97 / NPT / Solenoid/ air spring ,5 97 G / 5/ Solenoid/ air spring ,5 97 / NPT 5/ Solenoid/ air spring , G / 5/ Solenoid/Solenoid ,5 97 / NPT 5/ Solenoid/Solenoid , G / 5/ APB Solenoid/Solenoid, APB , 97 / NPT 5/ APB Solenoid/ Solenoid, APB , 97 5 *) When ordering, please indicate solenoid, voltage and current (frequency). Valve function: APB = All Ports Blocked 5/ -55e without notice, the specifications given in this document. Norgren GmbH N/en 5..7.

2 97 Inline Solenoid actuators Power consumption V d.c. V a.c. (W) (VA) Rated current V d.c. V a.c. (m A) (m A) Ex-Protection IP-Protection class (to EN 659) Ex-Protection (ATEX-Category) Temperature Ambient/Fluid,8 7 IP 65 (with connector) Connector DIN EN 75-8 Form B *6) ( C) Electrical connection Weight Dimension Circuit diagram Model (kg) Nr. Nr., 5,7, *) 9 IP 65 (with connector) Connector DIN EN 75-8 Form A *6), 85 IIG IID Ex na IIC T5 Gc Ex tc IIIC T95 Dc IP65 (with connector With special connector DIN EN 75-8 Form A, 6,7 5 IIG IID Ex mb IIC T5 Gb Ex mb tb T95 C Db IP65 (with connector) m cable, 6, 9 IIG IID Ex mb IIC T5 Gb Ex mb tb T95 C Db IP65 (with connector),7 5 IP 66 (with connector) Connector Mx, DIN IEC *6) m cable, 5 6 Solenoid with yellow LED Standard voltages (±%) V d.c., V a.c. Further versions on request. *) Valves can be operated with DC only. For V AC application please use 6V DC coil together with recifier plug: model 66 *) For battery installation + C max *6) Connector is not scope of delivery, see table»accessories«, 7 7 For intrinsically safe circuits, Protection class Ex ia IIC T6/T Ga (cat. II G) Nominal resistance RN coil (Ω) Required switching current min. (ma) Resistance RW 5 coil (Ω) Required voltage at terminal RW 5 (V) Temperature Ambient/ Fluid( C) ,8 T T Electrical connection Connector DIN EN 75-8 Form A *6) IP65 (with connector) Weight (kg) Dimension No. Circuit diagram No. Model, 5 9 When selecting an intrinsically safe power supply, the permissible maximum values according to the Certificate of Conformity should be taken in account. On the other hand, the low effective inductivity and capacity can be ignored. *6) Connector not supplied, required connector: model 5775 Approvals Model Approvals Datasheet ATEX IECEx FM 9 PTB ATEX CSA-LR 59- N/en x PTB 6 ATEX 55 N/en x PTB ATEX 5 N/en x EC-Declaration of Conformity N/en N/en without notice, the specifications given in this document. Norgren GmbH -55e 5/

3 97 Inline Option selector Function 5/ way valve with spring return 5/ way impuls 5/ way valve with spring return (APB) / way valve with spring return Port size G / / NPT Voltage V d.c.. V a.c..5 Solenoid see table Accessories Connectors DIN EN 75-8 Connectors M x M x Silencer Page Form A 555 (without cable) 556 (9, without cable) M/S (G/) 66 Form A (with rectifier) 557 ( m cable) 558 (9, m cable length) C/S (/ NPT) 68 Form B 55 (5 m cable) 55 (9, 5 m cable length) Manifold plates Page 5 stations stations stations 6 stations stations 6 Accessories for manifold plates Blanking plate *) Blanking plug for station and station manifolds Pressure shut-off part *) for station up to station manifolds DIN mounting kit *) For blocking of unused valve stations *) Necessory for using two different pressure 5/ -55e N/en without notice, the specifications given in this document. Norgren GmbH

4 97 Inline Dimensions Valves,5,5 ~ 7 9 (,5) ~ 8 ~ ~ 9,5 ~8 5 9 ~56 ~5 8 6,,5 () 5 () ~8 9 ~ ~6, ~ 9, ,5 7 ~ 9,5 () 5 () 6 8 ~8 9 8,5 ~, Solenoid 9 turnable 5 Manual override 66 Port size G/ or / NPT N/en without notice, the specifications given in this document. Norgren GmbH -55e 5/

5 97 Inline Dimensions Manifold plate and stations Manifold plate... stations B C A D D A C B M R S H G F E G F E J K M J K N T H S L P O N U O P R Model A B C D E F G H J K L M N O P R S T U er ,5 5 G /8 G /8 6 6 for M5 er ,5 78 G /8 G /8 5 6 for M5 -er ,5 (x 6)+ G /8 G /8 (x 6)+ 6 for M5 5/ -55e N/en without notice, the specifications given in this document. Norgren GmbH

6 97 Inline Dimensions Solenoid operators , ,5 9,5 9,5,5 9,5 Mx ~58 Electrical connection M x ,5 8 5,5,5 Pin Signal Cable + UB brown Out (PNP) / analogue to ma white Volt blue Out (PNP) black M6 x,5 8 9,5,5 5 M6 X, Connector x 9 turnable N/en without notice, the specifications given in this document. Norgren GmbH -55e 5/

7 97 Inline Circuit diagrams 5 7 Silencer Model: M/S, C/S,5 8 ø 5,5 / Warning These products are intended for use in industrial compressed air and fluid systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 5/ -55e N/en without notice, the specifications given in this document. Norgren GmbH