IBM 3.5-inch 1 TB SATA II HDDs provide highest capacity and performance for storage in System x, BladeCenter, and Storage and I/O Blade systems

Transcription

1 IBM United States Announcement , dated January 15, 2008 IBM 3.5-inch 1 TB SATA II HDDs provide highest capacity and performance for storage in System x, BladeCenter, and Storage and I/O Blade systems Key prerequisites...2 Description...3 Product positioning... 3 Reference information... 3 IBM Global Financing... 4 Product information...4 Prices...6 At a glance New 3.5 inch form-factor hard disk drives (HDDs) provide high-speed, high-performance SATA II technology for System x, BladeCenter, and Storage and I/O Blade systems. Benefits include: 1 TB SATA II HDD capacity 7,200-rpm HDDs Deliver SATA device reliability and large capacity performance in the IBM HDD family 3.5-inch, slim-line form factor Optimizes storage capacity S.M.A.R.T. Technology Through use of software utilities, can alert you of certain impending drive failures, so replacements can be made Available in single-port hot-swap and dual-port hot-swap versions One-year warranty New Business Partner Service offering for one hour of STG Services for System x (LSx) consulting For technical support: Call the IBM Support Center at 800-IBM-SERV ( ) or Request technical information via the Web site at Overview The addition of 1 TB HDD offerings to the IBM System x and BladeCenter family of 3.5-inch SATA II drives offers the highest performance options and provides a wider selection of choices to satisfy a wide range of applications. These new drives are positioned at the top of our SATA HDD line. These two 1 TB SATA II HDDs provide 3.5-inch form factor options that are available as single-port hot-swap or dual-port hot-swap configurations. Key features and benefits include: Up to 7,200 rpm speed to help optimize performance Outstanding reliability that enables operation in RAID environments without compromising application performance or availability You can put together a winning combination for data-storage applications when you install these new high-performance SATA HDDs in your IBM System x, BladeCenter, and blade I/O configurations 1. IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 1

2 Performance 1 TB performance characteristics include: Formatted capacity of 1,000,000 MB Drive to host interface that supports up to 3.0 Gb/s 2 burst rate Drive media to buffer interface that supports sustained interface data transfers of up to 112 MB/s average Spindle speed of 7,200 rpm Average latency of 4.17 ms Average seek on reads of less than 9 ms Hot-swap capability SAS interface with dual port option Reliability SAS compliance enables these HDDs to connect directly into System x, BladeCenter, and Storage and I/O Blades. S.M.A.R.T Technology allows software utilities to alert you of certain impending drive failures so replacements can be made before a problem occurs. Rigorous testing through the ServerProven program instills confidence that your storage subsystem 3 is compatible and will function reliably. The HDDs come with a one-year, limited warranty 4. Business Partners Services (44W3264) One hour of STG Lab Services for System x (LSx) consulting. This unit-based fee covers one-hour of LSx consulting including travel and expenses. Example engagements include the following: BladeCenter High-End x3850/x3950 Systems Management- IBM Director, IBM RDM, and Altiris VMware Virtual Infrastructure and P2V Clustering with Microsoft Datacenter Imaging pre-load configuration DS4000 Storage Server Consolidation and Server Migration Users can select the required number of units of consulting needed for each engagement based on LSx supplied sizing per the customer's requirements. Key prerequisites For details, refer to the Hardware requirements section. Planned availability dates 1 TB SATA II 7,200 rpm HDDs January 30, 2008 Business Partner Services for Public Sector January 15, 2008 IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 2

3 Description IBM 1 TB SATA II 7,200 RPM HDDs (43W7626, 43W7630) These two 7,200 rpm 1 TB HDDs provide 3.5-inch form factor options that can be used as hot-swap drives. The addition of a 7,200 rpm offering to the IBM System x, BladeCenter, and Storage and I/O Blade family of 3.5-inch SATA HDDs offers the highest performing SATA options and will provide a wider selection of choices to satisfy a range of applications. These new drives are positioned at the top of our SATA HDD line based on increased performance. Key features and benefits include: 7,200 rpm speed to optimize performance Outstanding reliability that enables operation in RAID environments without compromising application performance or availability A 3.5-inch wide, 1-inch high, slim-line form factor that allows maximum installations in supported System x, BladeCenter, and Storage and I/O Blade configurations Product positioning These high-performance 1 TB 7,200 rpm SATA II HDD options are positioned at the top of IBM's SATA HDD line based on the SATA technology. They are available in either a single-port hot-swap or dual-port hot-swap version. These HDDs support entry-level server and workstation applications, such as: Transaction processing Data mining Data warehousing Professional video and graphics Additional information All offers are subject to availability. IBM reserves the right to alter product offerings and specifications at any time without notice. IBM is not responsible for photographic or typographic errors. IBM makes no representation or warranty regarding third-party products or services. Accessibility by people with disabilities A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) containing details on accessibility compliance can be requested at Reference information 1 Refer to the Hardware requirements and Limitations sections for important information on installation and supported systems. 2 When referring to hard drive capacity, GB stands for 1,000,000,000 bytes. Total user-accessible capacity may vary depending on operating environments. 3 IBM makes no representation regarding third-party products or services including those designated as ServerProven. 4 For information on the IBM Statement of Limited Warranty, visit IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 3

4 Alternatively, this information is also available by calling or contacting your IBM representative or reseller. Copies are available upon request. Trademarks System x is a trademark of International Business Machines Corporation in the United States or other countries or both. BladeCenter and ServerProven are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Other company, product, and service names may be trademarks or service marks of others. IBM Global Financing IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Offerings include financing for IT acquisition, including hardware, software, and services, from both IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit IBM Global Financing offerings are provided through IBM Credit LLC in the United States, and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice. Product information IBM Server 1 TB 7200 SATA 3.5" HS (43W7626) IBM Storage and I/O Blade 1 TB 7200 Dual Port SATA 3.5" HS (43W7630) Business Partner Services for Public Sector (44W3264) Technical information Performance specifications Formatted capacity: 1,000,000 MB Spindle speed: 7,200 rpm Typical average read seek time: 9 ms Data transfer rate (maximum bursting): 112 MB/s Average latency: 4.17 ms Hot-swap capability SAS interface with dual-port option Physical specifications Approximate height: 14.8 mm (.45 in) Approximate width: 70.0 mm (2.5 in) Approximate depth: mm (3.97 in) Approximate weight: 1000 gm (2.1 lb) IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 4

5 Operating environment Temperature: 10 to 35 C (50 to 90 F) at 0 to 914 m Relative humidity: 8% to 80% noncondensing Agency approvals UL CSA TUV CE Mark C-Tick Mark IEC Taiwan (BSMI Certification) Korea EMI ENERGY STAR compliance: Is this product ENERGY STAR compliant? No Note: The ENERGY STAR emblem does not represent EPA endorsement of any product or service. Hardware requirements: The product numbers 43W7626 and 43W7630 are supported on the following IBM platforms. System name: System x Machine type: All with 3.5-inch HDD bays System name: BladeCenter Machine type: All with 3.5-inch HDD bays Platform name: Storage and I/O Blade Machine type: BladeCenter with 3.5-inch HDD bays Software requirements: These options are supported by the same operating systems and application software as the system in which they are installed. Limitations: These options require an SAS controller. Planning information Additional cable orders required: No Approximate installation time: 10 minutes Packaging: One box Shipment group HDD Installation publication and warranty Safety flyer IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 5

6 Security, auditability, and control This product uses the security and auditability features of host hardware, host software, and applications software. Terms and conditions Field installable Customer setup Warranty period(5) Service type (CCE/CCR/CRU) Maintenance agreement Optional upgrade Licensed programs Yes Yes 1 year CRU No No No (5) To obtain copies of the IBM Statement of Limited Warranty, contact your reseller or call IBM. Note: Programs included with this product are licensed under the terms and conditions of the License Agreements that are shipped with the feature or option. All other terms and conditions are the same as those applicable to the IBM machine type in which the feature is installed. In the United States, call , or write to: Warranty Information P.O. Box Research Triangle Park, NC Attn: Dept UF2A/B203 Help and service information Features and options During the warranty period, you can obtain technical support using IBM's online services or by calling the IBM Support Center at , 24 hours a day, 7 days a week, to answer any questions regarding your new IBM option. Response time will vary depending on the number and nature of calls received. If you need warranty service, return or exchange is available. In addition, if your IBM option is installed in an IBM computer, you may be entitled to service at your location. For general questions related to the use of your options, fee-based support is available. Your technical support representative can help you determine the best alternative. Accessing IBM online services: Refer to Prices For current prices, contact us at 888-Shop-IBM ( ) or visit Option SEOs Description SEO number IBM Server 1 TB 7200 SATA 3.5" HS IBM Storage and I/O Blade 1 TB 7200 Dual Port SATA 3.5" HS Business Partner Services for Public Sector 43W W W3264 Machine Feature Description type Model number IBM Server 1 TB 7200 SATA 3.5" HS 4362 MC IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 6

7 IBM Server 1 TB 7200 SATA 3.5" HS 4363 MC IBM Server 1 TB 7200 SATA 3.5" HS 4364 MC IBM Server 1 TB 7200 SATA 3.5" HS 4365 MC IBM Server 1 TB 7200 SATA 3.5" HS 7975 MC IBM Server 1 TB 7200 SATA 3.5" HS 7976 MC IBM Server 1 TB 7200 SATA 3.5" HS 7977 MC IBM Server 1 TB 7200 SATA 3.5" HS 7978 MC IBM Server 1 TB 7200 SATA 3.5" HS 7979 MC IBM Server 1 TB 7200 SATA 3.5" HS 7985 MC IBM Server 1 TB 7200 SATA 3.5" HS 8866 MC IBM Storage and I/O Blade 1 TB Dual Port SATA 3.5" HS Trademarks System x is a trademark of International Business Machines Corporation in the United States or other countries or both. BladeCenter is a registered trademark of International Business Machines Corporation in the United States or other countries or both. Other company, product, and service names may be trademarks or service marks of others. This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 7