Phantom Series. Operating Instructions. HDMI Distribution Amplifiers with Audio De-Embedder, Coaxial Audio, Optical Digital Audio & Analog L/R

Transcription

1 Phantom Series HDMI Distribution Amplifiers with De-Embedder, Coaxial, Optical Digital & Analog L/R Operating Instructions KD-HDDA1x2Pro KD-HDDA1x3Pro The Experts in Digital Video Technology and Solutions

2 4 Table of Contents Introduction... 1 Quick Setup Guide... 2 Installation and Operation... 3 DVI Applications for KD-HDDA Pro Series EDID Control Settings... 4 External Outputs... 5 RS-232 Commands and Protocol... 5 Mechanical / Technical Specifications... 6 Important Product Warnings: Safety Instructions:... 7 How to Contact Key Digital... 8 Warranty Information... 8 Always follow the instructions provided in this Operating Manual Key Digital, Inc. All rights reserved.

3 1 Introduction Key Digital Phantom Series HDMI/DVI Distribution Amplifiers are designed and engineered to offer the best in quality, performance, and reliability while providing a cost effective HDMI/ DVI distribution solution. The KD-HDDA1x2Pro; KD-HDDA1x3Pro; HDMI Distribution Amplifiers provide single input to multiple output distribution and maintain crystal-clear, pristine picture and sound quality. Phantom Series Distribution Amplifiers are a transparent solution for all digital video/audio distribution applications and support all HD and SD video standards, including 1080p/60. KD-HDDA Pro Distribution Amplifiers feature status-monitoring LEDs and are capable of separating HDMI. About the KD-HDDA1x2Pro; KD-HDDA1x3Pro; Distribution of one HDMI input to multiple (2, 3, or 4) HDMI outputs Supports all SD, HD, and VESA (VGA, SVGA, XGA, WXGA, SXGA, UXGA) resolutions up to 1080p (60Hz & 50Hz) SD & HD: 480i, 480p, 720p, 1080i, 1080p VESA: From 640x480p up to 1920x1200p EDID and HDCP Transparency between source and displays Can be used to strip audio from the HDMI input and send it to external digital or analog audio outputs Supports signal rates up to 10.2 Gb per second Supports HDMI and DVI-D Compliant with all HDMI versions and HDCP copyright protection Input and Output status indicated by LED lights Firmware upgradable Rack mountable Advanced HDMI Features 3D Capability to pass 3D stereoscopic signal formats Accessories External power supply: 5V 2A HDMI Lacing Clips Rack Ears Operating Instructions Warranty Card

4 2 ideo* RS-232 Quick Setup Guide Step 1: EDID Find Controla safe and convenient location to mount or place your KD-HDDA Pro unit Step 2: Begin with the KD-HDDA Pro unit and all input/output devices turned off with DVI power cables removed Step 3: Connect your HDMI or DVI-D source device to the input port of your KD-HDDA Pro unit Step 4: Connect your HDMI or DVI-D displays to the output port of your KD-HDDA Pro unit Step 5: Be sure the Operation Mode Switch is set to the Normal position Step 6: Connect power to the KD-HDDA Pro unit Step 7: Power on input/output devices Up to 600 with Key Digital KD-CAT6STP1X CAT6/STP KD-CATHD500FW HDMI/DVI * Display 1 RS-232 HDMI/DVI * KD-CATHD500FW CAT6/STP Display 2 HDMI/DVI * EDID Control Display 3 HDMI/DVI * Cable Box HDMI/DVI * HDMI/DVI * HDMI/DVI* Display 4 CAT6/STP Rcvr. Speakers Sub-Woofer Speakers Note: No signal conversion is done on the KD-HDDA1x2Pro; KD-HDDA1x3Pro;. If input signal is HDMI output signal will be HDMI. If input signal is DVI output signal will be DVI.

5 3 Installation and Operation Before permanently securing the unit for final installation of cabling behind walls or ceilings, test for proper operation of the unit and the cables in your system. It is recommended that you leave enough ventilation space to provide sufficient airflow and cooling, especially if you are going to leave the unit powered at all times. An optional HDMI cable clip (included) enables a method for securing HDMI cables the HDMI connectors on the back of the units and helps defeat intermittent or complete signal loss due to poor connection. Active Input / Output LED Indicators The front LEDs indicate that a valid HDMI / DVI-D connection is made between the KD-HDDA Pro unit and each Input / Output. Cable Box Display 1 RS-232 Display 2 Display 3 EDID Control Rcvr. DVI Applications for KD-HDDA Pro Series Speakers KD-HDDA Pro Distribution Amplifiers can also be used with DVI-D sources and displays. For these applications, use DVI to HDMI (Key Digital model number KD-MFHDMI or KD-FMHDMI) adapters. Note that while HDMI supports both video and audio over an HDMI cable, DVI-D supports only video. Speakers Sub-Woofer Display 4 Up to 600 with Key Digital KD-CAT6STP1X CAT6/STP KD-CATHD500FW Display 1 Desktop PC Display 2 RS-232 CAT6/STP KD-CATHD500FW Display 3 EDID Control DVI CAT6/STP Display 4 Display 1 RS-232 Display 2 EDID Control

6 4 EDID Control Settings At times, your HDMI sources and display may not synchronize properly. This is when EDID* control should be utilized. KD-HDDA Pro Distribution Amps feature an internal library of EDID settings to ensure your HDMI source s output is compatible with the display devices. Please reset the unit by either unplugging and plugging the HDMI connections, or via a power cycle for the new settings to take effect. Rotary EDID Settings: KD-HDDA1x2Pro EDID Settings 0 Copy EDID from HDMI Output i, 2Ch i, Dolby/DTS i, 2ch p, Dolby/DTS p, HD p, 2ch 7 3D, 2ch 8 3D, Dolby/DTS D, HD A 1280x1024 DVI B 1920x1080 DVI C 1920x1200 DVI D 1080p, 2Ch E 1080p, 2Ch F Copy EDID from HDMI Output 2 KD-HDDA1x3Pro EDID Settings 0 Copy EDID from HDMI Output i, 2Ch i, Dolby/DTS i, 2ch p, Dolby/DTS p, HD p, 2ch 7 3D, 2ch 8 3D, Dolby/DTS D, HD A 1280x1024 DVI B 1920x1080 DVI C 1920x1200 DVI D 1080p, 2Ch E Copy EDID from HDMI Output 3 F Copy EDID from HDMI Output 2 Rotary EDID Control Switch EDID Settings 0 Copy EDID from HDMI Output i, 2Ch i, Dolby/DTS i, 2ch p, Dolby/DTS p, HD p, 2ch 7 3D, 2ch 8 3D, Dolby/DTS D, HD A 1280x1024 DVI B 1920x1080 DVI C 1920x1200 DVI D Copy EDID from HDMI Output 4 E Copy EDID from HDMI Output 3 F Copy EDID from HDMI Output 2 Example of EDID Auto Select: If one of your system s displays supports 1080p and the second display only supports up to 1080i (does not support 1080p), then the highest common EDID format supported is 1080i. By choosing the Auto Select EDID Setting, your KD-HDDA Pro unit will inform your source device to output 1080i in order to ensure all displays receive a supported signal. * EDID (Extended display identification data) is a data structure provided by a display to describe its capabilities to a source device.

7 5 External Outputs Analog audio output via 3.5mm stereo phone jack 2 channel analog audio output from the selected HDMI input source Converts only 2 ch. PCM audio from the HDMI input to 2 channel analog audio output Only supports 2 ch. PCM audio, not multi-channel PCM, Dolby, DTS, HD audio Digital audio output via Coax/RCA Digital audio output from the selected HDMI input source Uses SPDIF format Supports PCM, Dolby, DTS; does not support multi-channel PCM or HD audio Digital audio output via Optical Digital optical audio output from the HDMI input Uses SPDIF format Supports PCM, Dolby, DTS; does not support multi-channel PCM or HD audio RS-232 Commands and Protocol KD-HDDA Pro units are compatible with all Control Systems, such as Compass Control, AMX, Control4, Crestron, RTI, Universal Connect your Control System s Master Controller to the KD-HDDA Pro unit using the RS-232 port. Follow all instructions provided with your control system. RS-232 Protocol: All RS-232 commands must be in Baud Rate = bits per second lower case letters Data Bits = 8 / Stop Bits = 1 Command must be terminated with Parity = None a carriage return Flow Control = None RS-232 Command Description H Help PF Power Off PN Power ON Video Output Setup Commands: xx = [01-02/03/04] (A=All) SPO xx ON/OFF Set Output xx ON/OFF Output Setup Commands: [E=Enable, D=Disable] SPO AA E/D Enable/Disable External Analog Output SPO DA E/D Enable/Disable External Digital Output System Address Setup Command: xx = [00-99], 00 = Single SPC Axx Set System Address to xx SPC DF Reset to Factory Defaults

8 6 Mechanical / Technical Specifications Inputs Outputs Bandwidth Compliance With HDMI Standard 1 HDMI Connector 4/3/2 HDMI Connectors Analog L/R Output (3.5mm Stereo Phone Jack) Digital Output (Coax; 1 RCA Jack + TOSLINK) Digital Output (Optical: 1RCA Jack + TOSLINK) TMDS bandwidth 10.2 Gb/s All HDMI versions and HDCP. Link Deep Color Support Lossless Compressed Digital Single Link: 1080p/60, 12 bit color depth, 1920x1200 max Supports digital video formats in Deep Color Mode at up to 12 bits/ color Supports lossless compressed digital audio (Dolby TrueHD, Dolby Digital Plus and DTS -HD Master ) DDC Signal (Data) HDMI Video/ Signal Input DDC Signal: 5 Volts p-p (TTL) Input Video Signal: 1.2 Volts p-p HDMI Connector I2C Communication EDID Control HDMI Connector: Type A, 19 Pin Female EDID and HDCP Bi-Directional Transparency from Display to Source 16 Available EDID Settings Power Source Dimensions Weight 5 Volt 2 Amp, VAC, Hz W=8.5, H=1.75, D=4 2 Lbs

9 7 Important Product Warnings: 1. Connect all cables before providing power to the unit. 2. Test for proper operation before securing unit behind walls or in hard to access spaces. 3. If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support with bolts or sheet-rock anchors. Safety Instructions: Please be sure to follow these instructions for safe operation of your unit. 1. Read and follow all instructions. 2. Heed all warnings. 3. Do not use this device near water. 4. Clean only with dry cloth. 5. Install in accordance with the manufacturer s instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 7. Only use attachments/accessories specified by the manufacturer. 8. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way including: Damage to the power supply or power plug Exposure to rain or moisture Power Supply Use: You MUST use the Power Supply provided with your unit or you VOID the Key Digital Warranty and risk damage to your unit and associated equipment.

10 8 How to Contact Key Digital System Design Group (SDG) For system design questions please contact us at: Phone: Key Digital Trainings For questions about Key Digital Trainings please contact us at: Phone: Customer Support For customer support questions please contact us at: Phone: Technical Support For technical questions about using Key Digital products, please contact us at: Phone: Marketing and Public Relations: For marketing and public relations information, please contact us at: Phone: Repairs and Warranty Service Should your product require warranty service or repair, please obtain a Key Digital Return Material Authorization (RMA) number by contacting us at: Phone: rma@keydigital.com Feedback Please any comments/questions about the manual to: customersupport@keydigital.com Warranty Information All Key Digital products are built to high manufacturing standards and should provide years of trouble-free operation. They are backed by a limited three-year parts and labor warranty.

11 9

12 Rev 0 March 2013 Key Digital, led by digital video pioneer Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high quality video imaging is important. Key Digital is at the forefront of the video industry for Home Theater Retailers, Custom Installers, System Integrators, Broadcasters, Manufacturers, and Consumers. Key Digital Systems :: 521 East 3rd Street :: Mount Vernon, NY Phone : Fax : Web :