Chapter 7. Computer-Aided Design and Drafting in Architecture
|
|
- Steven Wilkinson
- 7 years ago
- Views:
Transcription
1 Chapter 7 Computer-Aided Design and Drafting in Architecture
2 Drafting is changing Introduction Concepts and theories are the same, but tools are different Traditional manual drafting is rapidly converting to computer-aided design and drafting (CADD) Available in most drafting and architectural schools and is commonly used in architectural firm Computer-aided design (CAD) is a term often used as a reference to computer-aided drafting
3 Introduction (cont d.) Creativity happens before computers are used Bubble drawings for preliminary arrangements Sketches for ideas CADD systems Plan components Reduce or enlarge while keeping proportions Layers are used to separate information
4 Architectural CADD Software Autodesk, Inc. AutoCAD Products Bentley Systems, Inc. MicroStation Digital Canal Corporation Building Blocks, SolidBuilder, DetailPro, BidBuilder, and DigitalTakeoff
5 Architectural CADD Software Google SketchUp Graphisoft Products (cont d.) ArchiCAD Design/Building Series and Virtual Building SoftPlan Systems, Inc. Softview and SoftPlan
6 Productivity with CADD CADD increases drafting productivity Depends on a variety of factors (e.g., task, system, time in use, experience, repetition) Faster and more accurate Revisions Analyzing Ability to look at several designs at once CADD workstation Hardware, ergonomics, and positive work habits
7 Using CADD Templates Pattern of a standard or commonly used feature or features Created once and used on following drawing Templates Collection of symbols in a symbol library
8 Using CADD Templates (cont d.) Template drawing Base drawing containing standard components, values, settings, borders, and title blocks Help in creating new drawings by referencing a base drawing Template drawing section of Student CD Contains several predefined templates
9 U.S. National CAD Standard Group of agencies develop a single CADD standard for the U.S. U.S. National CAD Standard (NCS) Allows consistent and streamlined communication among owners, architects and designers, and construction teams Can result in reduced costs AutoCAD and MicroStation were selected as primary applications
10 Uniform Drawing System Construction Specifications Institute (CSI) Uniform Drawing System modules Standards, guidelines, and other tools for organizing and presenting architectural information Based on flexibility, consistency, and linking Provides a framework for facility model Adopted by the U.S. National CAD Standard
11
12 Model and Sheet File-Naming Model files Standards Contain individual elements that make up a final drawing Model file names Standard format based on project code, discipline designator, model file type, and user definable code Detail files Specific model file type that can include plans, elevations, sections, and details
13
14 Model and Sheet File-Naming Standards (cont d.) Library files Contain information for more than one project Text files Notes that can be used on multiple projects Sheet file names Prepare information for sheet setup
15 Sheet names Sheet Identification Similar to file names First one or two characters are the discipline designator Sheet identifier Located in title block and in any reference to sheet on a drawing
16 File Management Operating systems provide a tool that allows folder (i.e., directory) creation Allows storage and organization of files Project folders contain subfolders May include drawing files, word processing documents, and spreadsheets
17 Sheet Organization Sheet organization standards Improve communication and quality control Make data management easier Establish consistent sheet organization appearance Include: Sheet sizes, borders, and title blocks Sheet layout (e.g., drawing area coordinate system and note block)
18 Schedules Grouping of related features or applications Formats information in rows and columns Can be developed as computer-generated databases or spreadsheets May be incorporated into drawings or specifications May have text and symbols or diagrams NCS recommends uniform location, format, and information content Consistency and ease of use
19 Drafting Conventions Provide a standard format for graphic and text content on drawings NCS conventions include guidelines for: Consistent drawing placement Consistent orientation of dimensions, line representations, and drawing scales NCS defines scale as: Ratio of measuring units expressing a proportional relationship between a drawing and the full-size item
20 Drafting Conventions (cont d.)
21 Architectural drafting CADD Graphics A graphic language made up of features Line weights and types Text styles and fonts Dimensioning Terms and abbreviation Notes on drawings Architectural CADD symbols
22 Drawing on CADD Layers Drawings are made in layers Perfectly aligned with the others Each contains independent information Reproduced individually, in combination, or together
23 Drawing on CADD Layers (cont d.) CADD layer names Discipline designator Major and minor groups Status field Advantage of using CADD layers Ability to send drawing files on disk or through the Internet or an intranet
24 CADD Plotting Guidelines Forms of drawings created in CADD: Soft copy and hard copy Scale factors Numeric value used in the proper scaling of text, and dimension objects Model and sheet layout Model space and layout space
25 CADD Plotting Guidelines (cont d.) Getting ready to plot Plotter settings Pen settings Paper size Layout Plotting Drawings may be plotted in an electronic file Allows Internet publishing
5.2 Drawing Information. 0400 Consultants Procedure Manual. 5.2 Drawing Information: 5.2.2 Large Format Document Standards: Page 1 of 5
Page 1 of 5 5.2 : 5.2.1 General Information:.1 Final drawings for all projects shall be one of the following sizes: 11" x 17", 24" x 36" or 30" x 42". The dimensions refer to the outside edge or cut line.
More informationRoadway Plan Production
AutoCAD Civil 3D 2010 Education Curriculum Instructor Guide Unit 5: Transportation Design Lesson 5 Roadway Plan Production Overview This lesson describes how to automate the generation of plan and profile
More informationUniversity of Northern Iowa Design Documents Standards. October 2014
University of Northern Iowa Design Documents Standards October 2014 2014 UNI BUILDING AND DESIGN STANDARDS 1.1 CONTRACT DOCUMENT FORMAT 1.1.1 The Electronic Word Programs used for the Project manual shall
More informationCAD and Drawing Style Procedure
CAD and Drawing Style Procedure 0.1.1.8 Rev. 4 Date: 2014-Nov-20 Copyright 2014, Canadian Light Source Inc. This document is the property of Canadian Light Source Inc. (CLSI). No exploitation or transfer
More informationCity and County of Denver Department of Public Works. CAD Standards Configuration Setup
City and County of Denver Department of Public Works CAD Standards Configuration Setup April 2010 I. The Engineering CAD System The Engineering CAD System used by the City and County of Denver Department
More informationCAD Standards. Design Guidelines and Standards. June 2004. Office of the University Architect
Design Guidelines and Standards CAD Standards June 2004 Office of the University Architect Construction Management P.O. Box 210181 Cincinnati, Ohio 45221-0181 Table of Contents Contents CAD STANDARDS Introduction...
More informationAppendix D - Workflows / Tips and Tricks
Appendix D - Workflows / Tips and Tricks It is a well known fact that most users of software applications use only a small amount of the commands and tools available to them. CDOT has created a Tips and
More informationThe Shorten AutoCAD the road solution for mechanical, electrical, to done. and plumbing engineering. AutoCAD AutoCAD.
The Shorten AutoCAD the road solution for mechanical, electrical, to done. and plumbing engineering. AutoCAD AutoCAD Civil 3D MEP 2009 More Productivity, Same Skills Michigan-based Peter Basso Associates
More informationUse this translator to save ArchiCAD layouts/views in DXF/DWG format if you plan to continue
Tip Sheet ArchiCAD 11 Mark Horrocks Graphisoft New Zealand May 2007 DWG Translator In Architectural practice you often send and receive content from co-working Structural, Mechanical or Electrical Engineers.
More informationHow To Create A View Frame In 3D
12/4/2008-10:00 am - 11:30 am Room:Palazzo O-P (5th) The Secrets of Cutting Plan and Profile Sheets in AutoCAD Civil 3D Michelle Rasmussen - Application Engineer, IMAGINiT Technologies CV304-1P In this
More informationCAD Standards Guideline For Facility Documentation and Construction Projects
CAD Standards Guideline For Facility Documentation and Construction Projects Implemented March 2010 Page 1 of 9 Table of Contents A. Software B. CAD Methods 1. Layer Standards 2. Font 3. Lineweights 4.
More informationCAD Standards Guideline For Facility Documentation and Construction Projects
CAD Standards Guideline For Facility Documentation and Construction Projects Page 1 of 12 Table of Contents A. Software B. CAD Methods 1. Layer Standards 2. Font 3. Lineweights 4. External References 5.
More informationCOMPUTER-AIDED DESIGN (CAD) 2D, ARCHITECTURE
COMPUTER-AIDED DESIGN (CAD) 2D, ARCHITECTURE OVERVIEW ornamentation or cabinetry. PURPOSE Participants have the opportunity to use complex computer graphic skills, tools, and processes to develop representations
More informationCDOT Linking Excel Documents to MicroStation
CDOT Linking Excel Documents to MicroStation This document guides you through linking Excel spreadsheets to MicroStation. This workflow uses the example of linking a standard CDOT tab sheet but the concepts
More informationEffective Collaboration
AUTODESK BUILDING SOLUTIONS Effective Collaboration Exporting Revit Architecture Models as ACIS Solids for Use in AutoCAD MEP The intent of this paper is to explain a process by which architects using
More informationTHIS PAGE INTENTIONALLY LEFT BLANK
Facilities Management June 29, 2015 THIS PAGE INTENTIONALLY LEFT BLANK Page 2 of 31 CAD Guidelines and Standards Table of Contents SECTION 1: THE PURPOSE OF USING CAD DATA STANDARDS... 5 1.1 Industry Standards...
More informationSetting a New Standard for 2D Design
Setting a New Standard for 2D Design Plant Design Software Suite VERSION 2008 Raising the Bar on Piping Design By combining proven technologies with AutoCAD s advanced graphics engine, PROCAD has created
More informationThe QlikView deployment framework
Technical Brief The QlikView deployment framework January, 2014 Table of Contents Introduction 2 Who is this document for? 2 The QlikView deployment framework 3 A sample QDF setup 4 What s included in
More informationProfessional CAD System
Professional CAD System > ARCHITECTS site plans > BUILDERS > RESIDENTIAL DESIGNERS floor plans elevations 3D models details sigma design BuildersCAD Complete System Only $ 995 Professional CAD System High
More informationModule Code 4AZ500 Pre-requisite None CAD BIM DESIGN CONCEPT DRAFTING SOFTWARE 2D 3D
Module Title ARCHITECTURAL CAD Module Code 4AZ500 Pre-requisite None Date of Approval Module Level 4 Credit value 20 Total Number of Learning Hours 200 Key Words (10 words maximum) Module Delivery Online/Distance
More informationMicrosoft Project 2010
Tutorial 1: Planning a Project Microsoft Project 2010 In Tutorial Section 1.1 you will: Learn project management terminology Understand the benefits of project management Explore the Project 2010 window
More informationIDEA Drafting-Design Competition - Rules and Regulations
IDEA Drafting-Design Competition - Rules and Regulations General Information: 1. There is a $7.00 entrance fee per student for regional competition. There is no additional registration fee for contestants
More informationDale E. Applegate. dapplegate@marlandale.com. dale@consultd.com
Small Business Document Management Dale E. Applegate dapplegate@marlandale.com dale@consultd.com Where are you Today? With your Document Management Assess Your Current Document Management Low Tech- Paper
More informationSetting a New Standard for 2D Design
Setting a New Standard for 2D Design Plant Design Software Suite VERSION 2008 Raising the Bar on Piping Design By combining proven technologies with AutoCAD s advanced graphics engine, PROCAD has created
More informationThe need for CAD Standards
The need for CAD Standards In this workshop, we describe our experience gained when assisting a number of companies manage the production of drawings by design drafters working for a variety of 'outside'
More informationCOMPUTER-AIDED DESIGN (CAD) 2D, ARCHITECTURE. RCAD involves two RCAD 2D, OVERVIEW PURPOSE ELIGIBILITY TIME LIMITS ATTIRE PROCEDURE
COMPUTER-AIDED DESIGN (CAD) 2D, ARCHITECTURE OVERVIEW Participants create representations, such as foundation and/or floor plans, and/or elevation drawings, and/or details of architectural ornamentation
More informationComputer-Aided Drafting I
Course Syllabus Computer-Aided Drafting I Course Description This course introduces computer-aided drafting (CAD) and examines the hardware that makes up a CAD workstation. It also covers the operating
More informationSan Joaquin County Office of Education Career & Technical Education Web Design ~ Course Outline CBEDS#: 4601
Web Design Course Outline I II 1 Course Content 5 5 Student Evaluation Employment Opportunities 2 XHTML 10 10 Creating an HTML Document Formatting Text with HTML Adding Graphics with Multimedia Using forms
More informationUNIVERSITY OF WASHINGTON Facilities Services Design Guide. Civil. Topographical Survey. Design Evaluation. Construction Submittals
This section applies to design standards and procedures involved in the field location and plotting of all natural objects and surface improvements. This section also includes the requirements for submittal
More informationMICROSTATION INFORMATION BRIDGE DEPARTMENT
MICROSTATION INFORMATION BRIDGE DEPARTMENT CFLHD S FTP SITE ACCESS server name = ftp.cflhd.gov user name = cflhd password = fhwa-cflhd Feel free to tell the user name and password to anyone who needs it.
More informationPractical Strategy and Workflow for Large Projects: A Realistic Solution
Practical Strategy and Workflow for Large Projects: A Realistic Solution Marco Brasiel/Diego Faria Frazillio & Ferroni SE3193 This class presents a strategy for development of structural projects using
More informationPictavo powerful yearbook software designed to help you collaborate, manage, create and sell yearbooks.
2015-2016 Pictavo powerful yearbook software designed to help you collaborate, manage, create and sell yearbooks. Featuring the ability to gather photos from your entire school community and sell yearbooks,
More informationBIM: FOR PROJECT MANAGERS. 2011 CSI Southwest Region Conference Program 1B 8:45am 11:00am
BIM: FOR PROJECT MANAGERS ANA BAKER BRANDON GARRETT 2011 CSI Southwest Region Conference Program 1B 8:45am 11:00am 1 2 3 4 BIM Overview BIM Level of Development Evolution of the Drawing Process BIM Workflow
More informationBSBITU402A Develop and use complex spreadsheets
BSBITU402A Develop and use complex spreadsheets Revision Number: 1 BSBITU402A Develop and use complex spreadsheets Modification History Not applicable. Unit Descriptor Unit descriptor This unit describes
More informationCOURSE TITLE: ARCHITECTURAL DRAFTING GRADES 11 & 12 LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE:
COURSE TITLE: ARCHITECTURAL DRAFTING GRADES 11 & 12 LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE: Fall 2014 Architectural Drafting 2 Rutherford High School Rutherford,
More informationThe user forum is an excellent community in which to bounce questions off other professional users, like you.
INTRODUCTION Thank you for your interest in MicroSurvey Point Prep Point Prep is a simple to use desktop based product designed specifically for the construction layout professional. Point Prep is used
More informationo Ivy Tech DESN 102- Technical Graphics DESN 103- CAD Fundamentals
Indiana Department of Education Academic Course Framework ARCHITECHTURAL DRAFTING AND DESIGN I Architectural Drafting and Design I Gives students a basic understanding of the detailing skills commonly
More informationCoordinating and Sharing Information with Revit Architecture and Revit Structure Best Practices!
Revit Architecture and Revit Structure Best Practices! Erleen Hatfield Thornton-Tomasetti Uk Jung SE304-1 This class identifies best practices using Revit Architecture and Revit Structure for sharing and
More informationTechnical Drawing Specifications Resource A guide to support VCE Visual Communication Design study design 2013-17
A guide to support VCE Visual Communication Design study design 2013-17 1 Contents INTRODUCTION The Australian Standards (AS) Key knowledge and skills THREE-DIMENSIONAL DRAWING PARALINE DRAWING Isometric
More informationTHURSTON COUNTY PUBLIC WORKS DEPARTMENT Design and Construction Division. CADD & Civil 3D User Guidelines. v2.0_12_12_09
THURSTON COUNTY PUBLIC WORKS DEPARTMENT Design and Construction Division CADD & Civil 3D User Guidelines v2.0_12_12_09 THURSTON COUNTY PUBLIC WORKS DEPARTMENT DESIGN AND CONSTRUCTION DIVISION CADD & Civil
More informationInsight Advanced Workstation
Technical Specification Sheet Document No. 149-333P25 October 29, 2015 Insight Advanced Workstation Figure 1. Insight Advanced Main Menu. The Insight Advanced Workstation transforms a personal computer
More informationJumpStart Guide. Trimble QuickPen PipeDesigner 3D Software
L JumpStart Guide Trimble QuickPen PipeDesigner 3D Software Revision A February 2013 F Englewood Office Trimble Navigation Limited 384 Inverness Parkway, Suite 200 Englewood, Colorado 80112 (800) 234-3758
More informationProducing Utility Plans for FDOT CE-11-0110
STATE OF FLORIDA DEPARTMENT OF TRANSPORTATION Producing Utility Plans for FDOT CE-11-0110 Course Guide December 28, 2006 ENGINEERING / CADD SYSTEMS OFFICE TALLAHASSEE, FLORIDA http://www.dot.state.fl.us/ecso/
More informationEngineering Transfer. Engineering Technology, Manufacturing Technology, and Industrial Technology Transfer
86 Instructional Programs Students will develop the skills and knowledge necessary to select as well as develop engineering careers; produce engineering drawings that conform to industry standards; create
More informationWord processing software
Unit 244 Word processing software UAN: Level: 2 Credit value: 4 GLH: 30 Assessment type: Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: R/502/4628 Portfolio
More informationCreating Accessible Word Forms. Contents. Introduction
Word 2010: Contents Word 2010:... 1 Introduction... 1 Form Specifications... 2 File Type... 2 Zoom Level... 2 Form Margins... 2 Table Layout... 2 Borders... 4 Row Height... 5 Headers... 5 Top Row... 5
More informationFDOT Plans Production Tools
FDOT State Kit for AutoCAD Civil 3D Mike Racca CADD APPLICATIONS SUPPORT Florida Department of Transportation (ECSO) Email: Mike.Racca@dot.state.fl.us Phone: 850-245-1631 GENERAL Civil 3D Plan Production
More information11 Printing Designs. When you have completed this chapter, you will be able to:
11 Printing Designs Creating printed documents is the end we have worked towards from the beginning of this course. We have already been introduced to it very briefly with Printing - A First Look on page
More informationComputer Aided Drafting in Engineering
Unit 17: Computer Aided Drafting in Engineering Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose A/600/0267 BTEC National This unit gives learners the knowledge and skills
More informationECDL / ICDL Word Processing Syllabus Version 5.0
ECDL / ICDL Word Processing Syllabus Version 5.0 Purpose This document details the syllabus for ECDL / ICDL Word Processing. The syllabus describes, through learning outcomes, the knowledge and skills
More informationHow to Edit Your Website
How to Edit Your Website A guide to using your Content Management System Overview 2 Accessing the CMS 2 Choosing Your Language 2 Resetting Your Password 3 Sites 4 Favorites 4 Pages 5 Creating Pages 5 Managing
More informationLuna Community College 2012-2015. Drafting Technology Curriculum Profile
Revised: July 2012 Luna Community College 2012-2015 Drafting Technology Curriculum Profile Content Page Program Goals 2 Degree Requirements 3 Course Descriptions and Outcomes 5 Assessment. 10 Standard
More informationMicrosoft Word 2007 Module 1
Microsoft Word 2007 Module 1 http://pds.hccfl.edu/pds Microsoft Word 2007: Module 1 July, 2007 2007 Hillsborough Community College - Professional Development and Web Services Hillsborough Community College
More informationTABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE...
Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... 7 ADVANCE CONCRETE USER INTERFACE... 7 Other important
More informationCOURSE DES1010: SKETCH, DRAW & MODEL. Prerequisite:
COURSE DES1010: SKETCH, DRAW & MODEL Level: Prerequisite: Description: Parameters: Outcomes: Introductory None Students are introduced to observational sketching, drawing and modelling, and to a selection
More informationHybrid 2D/3D design The right tool for the right job at the right time
Siemens PLM Software Hybrid 2D/3D design The right tool for the right job at the right time White Paper Incorporating the benefits of 2D and 3D design technologies into a single effective design approach,
More informationCertified Instructors & Curriculum
Our Promise. TPM is dedicated to provide the most extensive and high-quality training programs to help you maximize your investment. Although the investment in time and money may seem substantial, it will
More informationROADWAY DESIGN'S (December 2012) CADD MANUAL
ROADWAY DESIGN'S (December 2012) CADD MANUAL CADD Manual Overview Disclaimer CADD Software Requirements MDOT FTP Site February 01, 2013 CADD Manual Overview Roadway Designs CADD/Help Manual This manual
More informationSpace Planning. Gretchen Addi, Associate AIA, and Jacqueline Lytle, IIDA, Associate AIA. Summary CLIENT NEEDS
Excerpt from The Architect s Handbook of Professional Practice, 13th edition, 2000 Space Planning Gretchen Addi, Associate AIA, and Jacqueline Lytle, IIDA, Associate AIA Space planning is an integral part
More informationUNIVERSITY OF WATERLOO Software Engineering. Analysis of Different High-Level Interface Options for the Automation Messaging Tool
UNIVERSITY OF WATERLOO Software Engineering Analysis of Different High-Level Interface Options for the Automation Messaging Tool Deloitte Inc. Toronto, ON M5K 1B9 Prepared By Matthew Stephan Student ID:
More informationSRCSB General Web Development Policy Guidelines Jun. 2010
This document outlines the conventions that must be followed when composing and publishing HTML documents on the Santa Rosa District Schools World Wide Web server. In most cases, these conventions also
More informationAutodesk Civil 3D Styles: A Guide to the Fundamentals
AUTODESK CIVIL 3D WHITE PAPER Autodesk Civil 3D Styles: A Guide to the Fundamentals About the Author: Mark Scacco, PE, is the founder and president of Engineered Efficiency, Inc., a technology consulting
More informationWorkflow MP 1- MicroStation Printing
Workflow MP 1- MicroStation Printing This document guides you through the basic functions of MicroStation printing. It is used for printing single sheets on a sheet by sheet basis. See workflow document
More informationCreating Drawings in Pro/ENGINEER
6 Creating Drawings in Pro/ENGINEER This chapter shows you how to bring the cell phone models and the assembly you ve created into the Pro/ENGINEER Drawing mode to create a drawing. A mechanical drawing
More informationDesign. Design. Certificates. Contact Information. Full-Time Faculty. Associate Degrees. Associate in Arts Degrees. Certificate of Achievement
Design Associate in Arts Degrees Architectural Design Computer-Aided Drafting Computer-Aided Drafting and Design Mechanical Design Students may earn one of the above-named associate degrees by completing
More informationExcel 2010: Create your first spreadsheet
Excel 2010: Create your first spreadsheet Goals: After completing this course you will be able to: Create a new spreadsheet. Add, subtract, multiply, and divide in a spreadsheet. Enter and format column
More informationServer-Based PDF Creation: Basics
White Paper Server-Based PDF Creation: Basics Copyright 2002-2009 soft Xpansion GmbH & Co. KG White Paper Server-Based PDF Creation: Basics 1 Table of Contents PDF Format... 2 Description... 2 Advantages
More informationMS OFFICE PUBLISHER IDEAS IN THE CURRICULUM
MS OFFICE PUBLISHER IDEAS IN THE CURRICULUM RICHARDSON INDEPENDENT SCHOOL DISTRICT INSTRUCTIONAL TECHNOLOGY RICHARDSON, TEXAS Prepared By: RISD Instructional Staff Development Revised by GPISD Instructional
More informationAutodesk Revit Keynotes Made Simple: Adding Custom Keynotes to Your Construction Documents Tony Crawford CAD-1, Inc.
: Adding Custom Keynotes to Your Construction Documents Tony Crawford CAD-1, Inc. MP6056-V Autodesk Revit software has great built-in tools for adding and managing keynotes. Often these tools are underused,
More informationUL Engineering Services & Software Private Limited. Engineering Base Software
UL Engineering Services & Software Private Limited Engineering Base Software The Engineering software Ebase which can be used for various Documentation, Drawings, Datasheets, BOM, Tag list, Cable schedule,
More informationDesign without compromise. Autodesk Revit. Architecture 2010
Design without compromise. Autodesk Revit Architecture 2010 BIM Simply a Better Way of Working Deliver projects faster, more economically, and with enhanced potential for reduced environmental impact.
More informationUse the Microsoft Office Word Add-In to Create a Source Document Template for Microsoft Dynamics AX 2012 WHITEPAPER
Use the Microsoft Office Word Add-In to Create a Source Document Template for Microsoft Dynamics AX 2012 WHITEPAPER Microsoft Office Word Add-Ins Whitepaper Junction Solutions documentation 2012 All material
More informationEECAD s MUST List MUST MUST MUST MUST MUST MUST MUST MUST MUST MUST
Customers are required to follow certain criteria for all designs whether they are ultimately done in EECAD or by the customers themselves. These criteria, approved by EES Management, are listed below:
More informationDreamweaver Domain 2: Planning Site Design and Page Layout
Dreamweaver Domain 2: Planning Site Design and Page Layout Adobe Creative Suite 5 ACA Certification Preparation: Featuring Dreamweaver, Flash, and Photoshop 1 Objectives Identify best practices for designing
More informationCHAPTER 5 - PROJECT INDEXING AND JOURNALING...
Table of Contents CHAPTER 5 - PROJECT INDEXING AND JOURNALING... 5-1 5.1 PROJECT INDEX GUIDELINES AND FORMAT...5-1 5.2 PROJECT JOURNAL GUIDELINES AND FORMAT...5-2 Project Indexing and Journaling CADD Production
More informationInternational standards on technical. documentation. documentation. International Electrotechnical Commission
International standards on technical documentation documentation International Electrotechnical Commission The whole life cycle of a product, system or installation needs documentation. International standards
More informationIE Class Web Design Curriculum
Course Outline Web Technologies 130.279 IE Class Web Design Curriculum Unit 1: Foundations s The Foundation lessons will provide students with a general understanding of computers, how the internet works,
More informationHow To Understand The Development Of Bim Technology
ISTANBUL TECHNICAL UNIVERSITY INSTITUTE OF SCIENCE AND TECHNOLOGY DEPARTMENT OF INFORMATICS ARCHITECTURAL DESIGN COMPUTING GRADUATE PROGRAM MBL 607E /BUILDING INFORMATION MODELS INSTRUCTOR: Assoc. Prof.
More informationPLAY VIDEO. Close- Closes the file you are working on and takes you back to MicroStation V8i Open File dialog.
Chapter Five Menus PLAY VIDEO INTRODUCTION To be able to utilize the many different menus and tools MicroStation V8i offers throughout the program and this guide, you must first be able to locate and understand
More informationConstruction Documents
Construction Documents introduction activities - core* Mock-Ups Window Installation Comparison of Documents Compliance with ADA Feedback on the Usefulness, or Quality, of Drawings from Contractors/Subcontractors
More informationo Ivy Tech DESN 105- Architectural Design I DESN 113- Intermediate CAD o Vincennes University ARCH 221- Advanced Architectural Software Applications
Indiana Department of Education Academic Course Framework ARCHITECHTURAL DRAFTING AND DESIGN II Architectural Drafting and Design II presents a history and survey of architecture and focuses on the creative
More informationF9D7 04 (ESKWP2): Word Processing Software 2
F9D7 04 (ESKWP2): Word Processing Software 2 4 SCQF credit points at SCQF level 5 Description: This is the ability to use a software application designed for the creation, editing and production of largely
More informationAnchor Bay High School Curriculum Syllabus INTRODUCTION TO COMPUTER AIDED DRAFTING
W N E Anchor Bay High School Curriculum Syllabus INTRODUCTION TO COMPUTER AIDED DRAFTING S CURRICULUM AREA: Drafting & Design Technology CAD COURSE TITLE: Introduction to Computer Aided Drafting GRADE
More informationMiraCosta College Computer Studies Department ~
MiraCosta College Computer Studies Department ~ CSIT: Computer Studies and Information Technology Course Catalog Effective Fall 2010 (pending final approval) Table of Contents CSIT Courses... 3 CSIT 100:
More informationMicrosoft Excel 2013 Tutorial
Microsoft Excel 2013 Tutorial TABLE OF CONTENTS 1. Getting Started Pg. 3 2. Creating A New Document Pg. 3 3. Saving Your Document Pg. 4 4. Toolbars Pg. 4 5. Formatting Pg. 6 Working With Cells Pg. 6 Changing
More informationChapter 3. Application Software. Chapter 3 Objectives. Application Software
Chapter 3 Objectives Chapter 3 Application Software Identify the categories of application software Explain ways software is distributed Explain how to work with application software Identify the key features
More informationINFORMATION TECHNOLOGY: OFFICE AND WORKPLACE
INFORMATION TECHNOLOGY: OFFICE AND WORKPLACE Earn a Continuing Education Certificate Business Technology Computer Graphics Computer Support Specialist Website Design X This symbol indicates that a course
More informationWE OFTEN BELIEVE artists
Analyzing the Residential Landscape WE OFTEN BELIEVE artists have the liberty to create anything they want. That is sometimes true, but many artists are hired to do particular types of work. Landscape
More informationCommunications for Engineering Technicians
Unit 2: Communications for Engineering Technicians Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose M/600/0251 BTEC National This unit gives learners the opportunity to
More informationECDL / ICDL Spreadsheets Syllabus Version 5.0
ECDL / ICDL Spreadsheets Syllabus Version 5.0 Purpose This document details the syllabus for ECDL / ICDL Spreadsheets. The syllabus describes, through learning outcomes, the knowledge and skills that a
More informationStructural Drafting. Students will: 1. Relate the importance of structural steel detailing to the current technological work force.
Structural Drafting Unit: 1 Content Standard(s) and Orientation 1. Relate the importance of structural steel detailing to the current technological work force. Learning Objective(s) and 1. Define structural
More informationTexas Department of Transportation San Antonio District File Management System
Texas Department of Transportation San Antonio District File Management System The File Management System (FMS) is a specified arrangement of folders and files. The purpose of the FMS is to create uniformity
More informationA BIM Case Study: SELCEN Mimarlik
A BIM Case Study: SELCEN Mimarlik Final Submission 19 January 2012 Yekta Ipek 523101013 MBL607E::Building Information Models Instructor: Salih Ofluoglu Istanbul 2012 Building Information Models Final Submission
More informationLayout Tutorial. Getting Started
Getting Started Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating
More informationEffective Collaboration using Revit Structure and AutoCAD MEP
REVIT STRUCTURE Effective Collaboration using Revit Structure and AutoCAD MEP This white paper explains how structural engineers using Revit Structure software and mechanical/electrical/plumbing (MEP)
More informationScientific Graphing in Excel 2010
Scientific Graphing in Excel 2010 When you start Excel, you will see the screen below. Various parts of the display are labelled in red, with arrows, to define the terms used in the remainder of this overview.
More informationVico Office R3.0 Help
1 Vico Office R3.0 Help User guide 2 Contents 3 Vico Office R3.0 Help Revision 1 4 Vico Office Introduction Welcome to Vico Office, Vico's integrated Virtual Construction environment. The Vico Office Suite
More informationAutoCAD Architecture 2012 UK Content Tools
AutoCAD Architecture 2012 UK Content Tools Contents Contents... 1 Installation... 2 Loading the utilities... 2 Utilities Overview... 3 Menu and Toolbar... 3 Content Generation... 3 Content Publishing...
More information