7 Widescreen LCD Television

Transcription

1 USER MANUAL TMOO7 7 Widescreen LCD Television

2 CAUTION 1. Never attempt your own maintenance, If something is not functioning correctly, please turn the TM007 off and contact your Local Authorised Majestic Dealer. The TM007 contains highly sensitive componentry that can easily be damaged or broken if you open the unit yourself. 2. Do not expose the TM007 to high levels of humidity, dust, steam, oil, smoke, direct sunlight etc. 3. Do not use thinners or other chemical cleaning agents. Wipe the TV off with a soft cloth if it gets dirty. 4. Do not leave the unit in excessively hot or cold places. Storage temperatures are within the range of -25c to +60c and Operating temperatures are within the range of 0c to +40c 5. Do not connect the TM007 to the power with any other adapter apart from the one supplied with the unit. 6. Turn power OFF when not in use and unplug the adaptor. 7. Avoid dropping the unit or any hard impact. For your safety: This unit should not be installed within view of the person driving the vehicle or vessel. The driver should not watch TV or operate the controls while driving. Please note that watching and operating the TV while driving are prohibited by law in some countries. Page 1

3 TMOO7 Parts Description - Main Unit (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) Channel selecting buttons Volume adjusting buttons Menu button TV / AV selecting button Power button Remote sensor LCD panel External antenna socket Earphone socket Audio 2 / Video 2 Input socket Audio 1 / Video 1 / Input socket for Rear Vision Control Built-In Speaker l2v DC Power Adapter Socket Mounting screw hole Unit Stand External Battery Housing Built-In Antenna Page 2

4 TMOO7 Parts Description - Remote Control (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) TV Sound System Select button Mute button Flash-back button - (Returns to previous channel) Sleep timer button Channel select button Channel digit selecting button TV/AV select button Picture mirror button Channel up and down buttons Menu button Volume Adjust Buttons Power ON / OFF View Mode Button Page 3

5 POWER SUPPLY Car Battery (DC I 2V): The optional car adaptor allows the TV to be powered by a car battery through the vehicles cigarette lighter. Battery Pack (DC 12V): The optional battery pack allows the TV to be powered when no other available power source is present. Please ensure that batteries are inserted correctly as shown in the battery socket. Do not leave Battery Pack connected when TV is OFF, the TV will drain the batteries due to the memory current. BASIC OPERATION 1. Turning ON/OFF TV 1) Connect the power source, and press the [POWER ON/OFF] button. Press the [POWER ON/OFF] again to turn the unit off. 2) If the TM007 is OFF, then the [CH+] or [CH-] buttons will also turn the unit ON. 3) The Sleep and Auto-Off times will be reset if the unit is disconnected from it s power source. 2. Selecting the TV or AV Mode 1) Press [AV/TV ] button each to change the mode from TV to AV or from AV to TV. While changing modes, the volume will MUTE. 2) If selecting the TV mode, please extend the built-in antenna or connect an external antenna to ensure the best reception. 3) If the unit has not been programmed for local stations then you can either automatically or manually search for local stations. For further details, please read the preset function MENU on Page 9. Page 4

6 MENU OPERATION 1) Picture adjust menu function Press the [MENU] button the following screen will appear: PICTURE BRIGHTNESS COLOUR CONTRAST SHARPNESS Press [CH+] or [CH-] button to select each item. Press [V+] or [V-] button to adjust each item. BRIGHTNESS: COLOUR: CONTRAST: SHARPNESS: Press [CH+] or [CH-] button to select the brightness. Press [V+] or [V-] button to adjust the brightness. Press [CH+] or [CH-] button to select the colour. Press [V+] or [V-] button to adjust the colour. Press [CH+] or [CH-] button to select the contrast. Press [V+] or [V-] button to adjust the contrast. Press [CH+] or [CH-] button to select the sharpness. Press [V+] or [V-] to adjust the sharpness. Page 5

7 2) Adjusting the audio Press [MENU] again to adjust the volume. Hold on [V+] or [V-] button to adjust the volume. The screen display: AUDIO VOLUME 33 Furthermore, you could press [V+] or [V-] button to adjust the volume even when there is no menu displayed. 3) Function adjustment. Press [MENU] button three times to adjust the functions. Press [CH+] or [CH-] button to select the function. Press [V+] or [V-] button to change the function option. The screen display: FUNCTION LANGUAGE CALENDAR GAME ENGLISH NORMAL NORMAL Page 6

8 LANGUAGE: Press [CH+] or [CH-] button to select the language. Press [V+] or [V-] button to change the language. Options available are English and Chinese. CALENDAR: Press [CH+] or [CH-] button to select the calendar. Press [V+] or [V-] button to adjust the month and date. GAME: Press [CH+] or [CH-] button to select the game. Press [V+] or [V-] button to enter into the game. The games Russia Square is available in this unit. The operation methods are as follows, Press [V+] button to move right, press [V-] button to move left, press [CH+] to turn up and down, press [CH-] button to accelerate. Picture mirror: **Used when TV is utilised as a Reversing Camera. Press [CH+] or [CH-] button to select the picture. Press [V+] or [V-] button to turn the picture left to right. Picture Up and Down: Press [CH+] or [CH-] button to select the picture. Press the [V+] or [V-] button to turn the picture up and down. 4) System adjustment Press the [MENU] button four times continuously, then display the system adjustment. Press [CH+] or [CH-] button to select the item. Press [V+] or [V-] button to change the functions. The screen displays: Page 7

9 C.SYS: Press [V+] or [V-] to change the colour system. The colour system options are: AUTO, PAL, P3.58, N3.58, N4.43, SECAM, SECAM-L, PALM, PALN. The default original colour system is AUTO S.SYS: Press [V+] or [V-] to change the TV sound system. The TV sound system options are: M, BG, I, DK. SWAP: Press [CH+] or [CH-] to choose the program swap item. This function sets the current channel to the SWAP channel. Press [CH+] or [CH-] to choose target channel (The selected channel is indicated by a RED channel number.) Press [V+] or [V-] to change the channel, then press [CH+] or [CH-] to choose currently channel number, press [V+] or [V-] to save the setting. COPY: Press [CH+] or [CH-] to choose program copy item. The function allows you to copy the current channel number to the channel number which you need. Press [CH+] or [CH-] to choose target channel number (it means the Channel has been chosen, when the channel number colour change to red.), Press [V+] or [V-] to add or reduce the number, then press [CH+] or [CH-] to choose currently channel number, press [V+] or [V-] to save the setting. WEAK SIGNAL: Under normal circumstances this should be set to ON. This allows weak signals to be received in good conditions. Page 8

10 5) Preset Function: Press the [MENU] button five times continuously, you will access the pre-set function menu. Press [CH+] or [CH-] to choose the item which you want to access, then press [V+] or [V-] to make your selection. The options are as follows: AUTO SEARCH: The default setting is Auto, press [V+] or [V-] to activate the Auto Search. When a signal is detected, it will be saved in the first available slot. SEARCH: Press [CH+] or [CH-] to choose this item, press [V+] or [V-] to proceed to search channels manually. Once a signal has been detected it will be stored. FINE TUNE: Press [CH+] or [CH-] to choose this item, by pressing [V+] or [V-], you can adjust the fine tuning manually while the image is on the screen. BAND: Press [CH+] or [CH-] to choose this item, press [V+] or [V-] to choose the band, the band formats which you can choose have: VHF-L, VHL-H, UHF. PROGRAM: Press [CH+] or [CH-] to choose this item, press [V+] or [V-] to increase or decrease the channel, the total channels available for storage is 255. SKIP: Press [CH+] or [CH-] to choose this item, press [V+] or [V-] to wipe the current channel. Page 9

11 6) Clock Set Function Press the [MENU] button six times continuously, you would find the clock set function menu. Press [CH+] or [CH-] to choose item which you request, then press [V+] or [V-] to change the item. The default setting is sleep. Press [V+] or [V-] to change the sleeping time, time will increase and decrease in 10 minute increments. The max sleeping time is 240 minutes. CLOCK: Press [CH+] or [CH-] to choose this item, the original condition is as below: Press [V+] or [V-] to reset to zero, press [V+] to increase by one minute, the max setting is 59 minutes, then press the button once more, it will come back to zero. Press [V-] to add one hour, the max can be 23 Hours, then press the button once more and it will come back to original setting. NOTE: This setting will reset to the factory default when the TM007 is disconnected from a power source. OFF TIME: Press [CH+] or [CH-] to find the default for this setting, then Press [V+] or [V-] to set it to zero, press [V+] to increase the minutes (59 Mins Max) Press [V-] to increase the hours, (23 Hours Max) The unit will automatically power down after the pre-set time. Page 10

12 NOTE: This setting will reset to the factory default when the TM007 is disconnected from a power source. ON TIME: Press [CH-] to find the default setting for this item, then press [V+] or [V-] to make it to zero, press [V+] to increase the minutes (59 Mins Max). Press [V-] to increase the hours, (23 Hours Max). The unit will automatically power up once the selected time occurs. NOTE: This setting will reset to the factory default when the TM007 is disconnected from a power source. ALARM: Press [CH-] to find the default setting of this item, then press [V+] or [V-] to make it to zero, press [V+] to increase the minutes (59 Mins Max). Press [V-] to increase the hours, (23 Hours Max). The alarm will sound when the selected time is reached. B. TIME: Press [CH+] to find the default setting of this item, then press [V+] or [V-] to make it to zero, press [V+] to increase the minutes (59 Mins Max). Press [V-] to increase the hours, (23 Hours Max). The unit will autoalarm you the time when the booking time comes. B.PR: Press [V+] or [V-] to increase or decrease the booking channel number, you can choose from 0 to 255. Page 11

13 7) AV Operation When you change TV system to AV system, Pre-set function and S.SYS, SWAP, COPY, WEAK SIGNAL, PRESET will not display on the screen. 8) Listening with earphones. Plug the earphones into the earphone socket. The Speakers will MUTE and the sound will be directed through the earphones. 9) Using an outdoor antenna In areas where TV signal are too weak for the rod antenna to provide good reception, you should use an outdoor antenna. Connect the smaller end of antenna adaptor to the LCD TVs external antenna socket, the bigger end to the antenna feedback. 10) V.MODE function Press V.MODE button of remote control you can change the picture display mode. Available modes are Mode Aspect Ratio Full 16:9 Adjust 4:3 Normal 16:9 Zoom 16:9 Page 12

14 E. TROUBLESHOOTING The following conditions do not necessary mean that the TV is broken. Please check the causes as indicated below requesting that the TV be serviced. Condition No sound and no picture No Picture No Sound Poor Reception Dark Picture Cause Dead batteries or batteries inserted incorrectly, AC Adapter is not inserted correctly Incompatible power supply being used. Is TV / AV Selected properly? Is the channel tuned in correctly? Try to reset the Broadcasting Channels Is the S.SYS selected properly? Is the volume adjusted correctly? Are the earphones plugged in? Poor signal can degrade sound. Is the S.SYS selected properly? Is the antenna adjusted to receive the signal? Is the channel tuned to the correct frequency? Is the S.SYS selected properly? Is the brightness / contrast adjusted correctly? Picture is visible, but poor reception Snow The broadcast signal may be too weak. Is the antenna adjusted properly? Is the 'Weak Signal' function on? You may be receiving electronic interference from engines, high voltage wires or other electronic devices. Poor Colour Is the colour setting adjusted properly? Poor signal can degrade the colour of the picture. Is the correct S.SYS selected? Remote Control doesn't work Replace Batteries and check they are inserted correctly. Is anything blocking the path of the signal to the unit? Page 13

15 F. SPECIFICATIONS Type: TFT LCD colour Television Reception Frequencies: 45.25MHZ MHZ System: PAL / SECAM Display Element: Colour TFT LCD Screen Size: 7 inches Resolution: 1440 x 234 Audio Output: 500mW(Max) Speaker: 20mm x 40mm square speaker (one) Back Light: High luminance fluorescent light tube Connection Terminals: External antenna socket Earphone socket External power socket (DC 12V) Audio / Video input socket Power Supply: 2-way power supply system 12V Cigarette Lighter Plug Battery Pack - Requires 10 x AA Batteries (Not Supplied) Power consumption: Dimensions: Weight: Approx.. SW 192mm x 133mm x 42mm Approx.. 630g G. ACCESSORIES WITH TV Antenna Adaptor, A / V Cable, USB Cable, Remote Control, 12V Car Adaptor, Earphones, Stand, Battery Pack Page 14

16 Majestic Global Unit 1 / 20 Export Drive MOLENDINAR QLD 4214 AUSTRALIA Ph: Fax: info@majestic-global.com