Straight / Angulated Multi-Unit System

Size: px

Start display at page:

Download "Straight / Angulated Multi-Unit System"

Brooke Dixon
7 years ago
Views:

2 2. MIS Multi-Unit screw-retained abutments provide a superior yet simple prosthetic solution for screw-retained full and partial prosthetic appliances in almost every clinical scenario. These low profile connections come in different insertion angles and in varying gingival heights for surgical efficiency and exceptional aesthetic outcomes. 100% compatibility is assured using MIS implants in all connections types and platforms. Multi-Unit abutments are made of biocompatible Titanium Alloy Ti 6Al-4V and are tested for strength and durability. The MIS high quality surface finish ensures a precision fit. All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: MIS products referred to in this document should be used by licensed dentists only.

3 3. Advantages Accurate Allows more precise impression-taking Special gripping bar for stable insertion Versatile Choice of insertion angles and cuff heights Corresponding prosthetic components engineered for fit Predictable Low profile with no sharp edges for better soft tissue healing Exceptional aesthetic results and reliability

4 4. Straight Multi-Unit Abutments Simple and easy to use, straight Multi-Unit abutments provide screw-retained restorative solutions for every clinical scenario in which implants with a divergence of up to 40º are used. Designed to fit all MIS implant connection types for optimal fit between abutment seat and implant connection. Straight Multi-Unit Abutment Package: Plastic gripping bar Straight abutment Insertion Path: Straight Multi-Unit abutments can be used with implants with divergence of up to 40º. 4.8mm 4.8mm ^ 40 ^ 2mm 2mm 1-5mm 1-5mm Internal Hex. Connection Conical Connection * Recommended tightening moment of 30 Ncm.

5 5. Straight Multi-Unit Abutments Insertion Procedure Do not exceed 30Ncm A B C A Use the plastic gripping tool to attach the abutment to the implant. B Remove the plastic tool with a slight bending movement. C Tighten abutment to 30Ncm using the ball attachment anchor key (MT-RB225) and torque wrench (MT-RI040).

6 ^ ^ 6. Angulated Multi-Unit Abutments The perfect solution in cases where angulation correction is required, angulated Multi-Unit abutments are simple and easy to use. Options include: 17º angulation for use with implants with a divergence of up to 75º. 30º angulation for use with implants with a divergence of up to 100º. Angulated Multi-Unit Abutment Package: Metallic gripping bar Angulated abutment Insertion Path: º Multi-Unit abutments can be used with implants with divergence of up to 75º ^ 75 ^ mm mm 2.40mm H 1mm 3mm H 1mm 30º Multi-Unit abutments can be used with implants with divergence of up to 100º. 100 Internal Hex. Connection Conical Connection * Recommended tightening moment of 20 Ncm.

7 7. Angulated Multi-Unit Abutments Insertion Procedure Do not exceed 20Ncm A B C A Use the metallic gripping tool to position the abutment, and use the Multi-Unit key (MT-MUR02) to attach the abutment to the implant with a clockwise screwing motion. B Remove the metallic gripping tool with a counterclockwise movement. C Tighten abutment to 20Ncm using the Multi-Unit key (MT-MUR02) and torque wrench (MT-RI040). To screw in or unscrew angulated abutments, insert the Multi-Unit key into the lateral opening at the side of the abutment as shown.

8 8. Prosthetic Options Restorative options include single crowns, multiple-unit bridge restorations and full overdentures. Fixed, screw-retained bridge Low profile enables a variety of insertion options.

9 9. MIS supports two main types of overdenture restoration methods: Removable-bar restorations and fixed, screw-retained prosthetic devices. Both methods allow easy placement and can be removed as needed for oral hygiene treatment. Fixed, screw-retained prosthetic device Improved prosthetic support. Increased inter-implant distance. Removable, bar-retained overdenture Standard impression method. Standard restorative components. Improved esthetics.

10 CAD/CAM cementing cap MU-CC480 Gold bar coping abutment MU-BGC48 Plastic cylinder MU-CP048 Screw for angulated Multi-Unit EM-SA001 Healing cap MU-H4480 Impression coping, closed tray MU-IT480 Multi-Unit direct gold MU-MG480 Impression coping, open tray MU-I0480 Prosthetic Products Offering greater restorative flexibility, a special line of prosthetic components has been designed for both straight and angulated Multi-Unit abutments. Scanning abutment MU-SP001 Multi-Unit free rotation titanium temporary cylinder MU-TO480 Prosthetic gold screw MU-G0220 Analog MU-RSM48 Multi-Unit key MT-MUR02 Ball attachment anchor key MT-RB225 Prosthetic screw MU-S0220 Torque wrench MT-RI040 Multi-Unit abutments are made of titanium alloy Ti 6Al-4V ELI. This product is delivered non-sterile and must be sterilized prior to use by autoclave at 134ºC (273ºF) for 6 minutes. Do not exceed 134ºC during sterilization.

11 All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: MIS products referred to in this document should be used by licensed dentists only.

12 MC-MUA08 Rev.5 02/2015 MIS Implants Technologies Ltd. MIS Quality System complies with international quality standards: ISO 13485: Quality Management System for Medical Devices, ISO 9001: 2008 Quality Management System and CE Directive for Medical Devices 9342//EEC. Please note not all products are registered or available in every country/region.

Standard Internal Hex

Standard Internal Hex Touareg TM -OS Touareg TM -S Swell TM Touareg -S Touareg -OS Swell About ADIN Adin Dental Implant Systems Ltd., designs, manufactures and markets state of the art, technologically